-
High-Tc superconducting detector for highly-sensitive microwave magnetometry
Authors:
François Couëdo,
Eliana Recoba Pawlowski,
Julien Kermorvant,
Juan Trastoy,
Denis Crété,
Yves Lemaître,
Bruno Marcilhac,
Christian Ulysse,
Cheryl Feuillet-Palma,
Nicolas Bergeal,
Jérome Lesueur
Abstract:
We have fabricated arrays of High-T$_c$ Superconducting Quantum Interference Devices (SQUIDs) with randomly distributed loop sizes as sensitive antennas for Radio-Frequency (RF) waves. These sub-wavelength size devices known as Superconducting Quantum Interference Filters (SQIFs) detect the magnetic component of the electromagnetic field. We use a scalable ion irradiation technique to pattern the…
▽ More
We have fabricated arrays of High-T$_c$ Superconducting Quantum Interference Devices (SQUIDs) with randomly distributed loop sizes as sensitive antennas for Radio-Frequency (RF) waves. These sub-wavelength size devices known as Superconducting Quantum Interference Filters (SQIFs) detect the magnetic component of the electromagnetic field. We use a scalable ion irradiation technique to pattern the circuits and engineer the Josephson junctions needed to make SQUIDs. Here we report on a 300 SQUIDs series array with loops area ranging from $6$ to $60\ μm^{2}$, folded in a meander line covering a $3.5\ mm\times 8\ mm$ substrate area, made out of a $150$-nm-thick $\mathrm{YBa}_2\mathrm{Cu}_3\mathrm{O}_7$ film. Operating at a temperature $T=66\ K$ in a un-shielded magnetic environment, under low DC bias current ($I=60\ μA$) and DC magnetic field ($B=3\ μT$), this SQIF can detect a magnetic field of a few $pT$ at a frequency of $1.125\ GHz$, which corresponds to a sensitivity of a few hundreds of $fT/\sqrt{Hz}$, and shows linear response over 7 decades in RF power. This work is a promising approach for the realization of low dissipative sub-wavelength GHz magnetometers.
△ Less
Submitted 20 May, 2019; v1 submitted 25 January, 2019;
originally announced January 2019.
-
Static and Radio-frequency magnetic response of high Tc Superconducting Quantum Interference Filters made by ion irradiation
Authors:
Eliana Recoba Pawlowski,
Julien Kermorvant,
Denis Crété,
Yves Lemaître,
Bruno Marcilhac,
Christian Ulysse,
François Couëdo,
Cheryl Feuillet-Palma,
Nicolas Bergeal,
Jérôme Lesueur
Abstract:
Superconducting Quantum Interference Filters (SQIF) are promising devices for Radio- Frequency (RF) detection combining low noise, high sensitivity, large dynamic range and wide-band capabilities. Impressive progress have been made recently in the field, with SQIF based antennas and amplifiers showing interesting properties in the GHz range using the well-established Nb/AlOx technology. The possib…
▽ More
Superconducting Quantum Interference Filters (SQIF) are promising devices for Radio- Frequency (RF) detection combining low noise, high sensitivity, large dynamic range and wide-band capabilities. Impressive progress have been made recently in the field, with SQIF based antennas and amplifiers showing interesting properties in the GHz range using the well-established Nb/AlOx technology. The possibility to extend these results to High Temperature Superconductors (HTS) is still open, and different techniques to fabricate HTS SQIFs are competing to make RF devices. We report on the DC and RF response of a High Temperature SQIF fabricated by the ion irradiation technique. It is made of 1000 Superconducting QUantum Interference Devices (SQUIDs) in series, with loop areas randomly distributed between 6 micron2 and 60 micron2. The DC transfer factor is around 450 V/T at optimal bias and temperature, and the maximum voltage swing around 2:5 mV . We show that such a SQIF detects RF signals up to 150 MHz. It presents linear characteristics for RF power spanning more than five decades, and non-linearities develop beyond PRF = -35 dBm in our set-up configuration. Second-harmonic generation has been shown to be minimum at the functioning point in the whole range of frequencies. A model has been developed which captures the essential features of the SQIF RF response.
△ Less
Submitted 28 February, 2018;
originally announced February 2018.
-
High-Tc Superconducting Quantum Interference Filters (SQIFs) made by ion irradiation
Authors:
S. Ouanani,
J. Kermorvant,
C. Ulysse,
M. Malnou,
Y. Lemaître,
B. Marcilhac,
C. Feuillet-Palma,
N. Bergeal,
D. Crété,
J. Lesueur
Abstract:
Superconducting Quantum Interference Filters (SQIFs) are arrays of superconducting loops of different sizes including Josephson Junctions (JJ). For a random distribution of sizes, they present a non-periodic response to an applied magnetic field, with an extended linear regime and a sizable field sensitivity. Such properties make SQIFs interesting devices to detect the magnetic component of electr…
▽ More
Superconducting Quantum Interference Filters (SQIFs) are arrays of superconducting loops of different sizes including Josephson Junctions (JJ). For a random distribution of sizes, they present a non-periodic response to an applied magnetic field, with an extended linear regime and a sizable field sensitivity. Such properties make SQIFs interesting devices to detect the magnetic component of electromagnetic waves at microwave frequencies. We have used the highly scalable technique of ion irradiation to make High Tc SQUIDs and SQIFs based on commercial YBa2Cu3O7 films, and studied their properties. Both display optimum performances as a function of temperature and bias current, that can be understood in the frame of numerical simulations that we developed. The role of asymmetries and spread in JJ characteristics (routinely found in HTSc technologies) is described : ion irradiation based devices appear robust against them. We finally present results on SQIF made with 2000 SQUID in series, showing a transfer function dV/dB ~ 1000V/T .
△ Less
Submitted 1 June, 2016; v1 submitted 24 March, 2016;
originally announced March 2016.
-
Microwave heating-induced DC magnetic flux penetration in YBa$_{2}$Cu$_{3}$O$_{7-δ}$ superconducting thin films
Authors:
Julien Kermorvant,
Jean-Claude Mage,
Bruno Marcilhac,
Yves Lemaitre,
Jean-François Bobo,
Cornelis Jacominus Van Der Beek
Abstract:
The magneto-optical imaging technique is used to visualize the penetration of the magnetic induction in YBa$_{2}$Cu$_{3}$O$_{7-δ}$ thin films during surface resistance measurements. The in-situ surface resistance measurements were performed at 7 GHz using the dielectric resonator method. When only the microwave magnetic field $H_{rf}$ is applied to the superconductor, no $H_{rf}$-induced vortex pe…
▽ More
The magneto-optical imaging technique is used to visualize the penetration of the magnetic induction in YBa$_{2}$Cu$_{3}$O$_{7-δ}$ thin films during surface resistance measurements. The in-situ surface resistance measurements were performed at 7 GHz using the dielectric resonator method. When only the microwave magnetic field $H_{rf}$ is applied to the superconductor, no $H_{rf}$-induced vortex penetration is observed, even at high rf power. In contrast, in the presence of a constant magnetic field superimposed on $H_{rf}$ we observe a progression of the flux front as $H_{rf}$ is increased. A local thermometry method based on the measurement of the resonant frequency of the dielectric resonator placed on the YBa$_{2}$Cu$_{3}$O$_{7-δ}$ thin film shows that the $H_{rf}$--induced flux penetration is due to the increase of the film temperature.
△ Less
Submitted 17 May, 2012;
originally announced May 2012.
-
Joule heating and high frequency nonlinear effects in the surface impedance of high Tc superconductors
Authors:
Julien Kermorvant,
Cornelis Jacominus Van Der Beek,
Jean-Claude Mage,
Bruno Marcilhac,
Yves Lemaître,
Javier Briatico,
Rozenn Bernard,
Javier Villegas
Abstract:
Using the dielectric resonator method, we have investigated nonlinearities in the surface impedance Zs = Rs + jXs of YBa2Cu3O7 thin films at 10 GHz as function of the incident microwave power level and temperature. The use of a rutile dielectric resonator allows us to measure the precise temperature of the films. We conclusively show that the usually observed increase of the surface resistance o…
▽ More
Using the dielectric resonator method, we have investigated nonlinearities in the surface impedance Zs = Rs + jXs of YBa2Cu3O7 thin films at 10 GHz as function of the incident microwave power level and temperature. The use of a rutile dielectric resonator allows us to measure the precise temperature of the films. We conclusively show that the usually observed increase of the surface resistance of YBa2Cu3O7 thin film as function of microwave power is due to local heating.
△ Less
Submitted 23 September, 2009;
originally announced September 2009.
-
Frequency converter based on nanoscale MgO magnetic tunnel junctions
Authors:
B. Georges,
J. Grollier,
V. Cros,
B. Marcilhac,
D. -G. Crété,
J. -C. Mage,
A. Fert,
A. Fukushima,
H. Kubota,
K. Yakushijin,
S. Yuasa,
K. Ando
Abstract:
We observe both dc voltage rectification and frequency conversion that occur when a reference microwave current is injected to a MgO based magnetic tunnel junction (MTJ). The rectification that is spin-transfer torque dependent is observed when the frequency of the input microwave current coincides with the resonance frequency of the magnetization of the active layer. In addition, we demonstrate…
▽ More
We observe both dc voltage rectification and frequency conversion that occur when a reference microwave current is injected to a MgO based magnetic tunnel junction (MTJ). The rectification that is spin-transfer torque dependent is observed when the frequency of the input microwave current coincides with the resonance frequency of the magnetization of the active layer. In addition, we demonstrate that frequency conversion is the result of amplitude modulation between the reference signal and the resistance of the MTJ that is fluctuating at the resonance frequency of the magnetization of the active layer.
△ Less
Submitted 23 July, 2009;
originally announced July 2009.
-
Coupling efficiency for phase locking of a spin transfer oscillator to a microwave current
Authors:
B. Georges,
J. Grollier,
M. Darques,
V. Cros,
C. Deranlot,
B. Marcilhac,
A. Fert,
G. Faini
Abstract:
The phase locking behavior of spin transfer nano-oscillators (STNOs) to an external microwave signal is experimentally studied as a function of the STNO intrinsic parameters. We extract the coupling strength from our data using the derived phase dynamics of a forced STNO. The predicted trends on the coupling strength for phase locking as a function of intrinsic features of the oscillators i.e. p…
▽ More
The phase locking behavior of spin transfer nano-oscillators (STNOs) to an external microwave signal is experimentally studied as a function of the STNO intrinsic parameters. We extract the coupling strength from our data using the derived phase dynamics of a forced STNO. The predicted trends on the coupling strength for phase locking as a function of intrinsic features of the oscillators i.e. power, linewidth, agility in current, are central to optimize the emitted power in arrays of mutually coupled STNOs.
△ Less
Submitted 21 May, 2008; v1 submitted 28 February, 2008;
originally announced February 2008.
