-
Thermoelectric Performance Boost by Chemical Order in Epitaxial L2$_1$ (100) and (110) Oriented undoped Fe$_2$VAl Thin Films: An Experimental and Theoretical Study
Authors:
José María Domínguez-Vázquez,
Olga Caballero-Calero,
Ketan Lohani,
José J. Plata,
Antonio M. Marquez,
Cristina V. Manzano,
Miguel Ángel Tenaguillo,
Hiromichi Ohta,
Alfonso Cebollada,
Andres Conca,
Marisol Martín-González
Abstract:
This study demonstrates the direct correlation between the presence of the L2$_1$ ordered phase and the large enhancement in the thermoelectric performance of Fe$_2$VAl thin films deposited on MgO and Al$_2$O$_3$ substrates at temperatures varying between room temperature and 950$^{\circ}$C. We employ both experimental techniques and computational modeling to analyze the influence of crystallograp…
▽ More
This study demonstrates the direct correlation between the presence of the L2$_1$ ordered phase and the large enhancement in the thermoelectric performance of Fe$_2$VAl thin films deposited on MgO and Al$_2$O$_3$ substrates at temperatures varying between room temperature and 950$^{\circ}$C. We employ both experimental techniques and computational modeling to analyze the influence of crystallographic orientation and deposition temperature on the thermoelectric properties, including the Seebeck coefficient, electrical conductivity, and thermal conductivity. Our findings indicate that the presence of the L2$_1$ phase significantly enhances the power factor (PF) and figure of merit (zT), surpassing previously reported values for both bulk and thin film forms of Fe$_2$VAl, achieving a PF of 480 $μ$W/m$\cdot$K$^2$ and a zT of 0.025.
△ Less
Submitted 27 March, 2025;
originally announced March 2025.
-
CoSb3-based skutterudite nanocomposites prepared by cold sintering process with enhanced thermoelectric properties
Authors:
Aida Serrano,
Olga Caballero-Calero,
Cecilia Granados-Miralles,
Giulio Gorni,
Cristina V. Manzano,
Marta Rull-Bravo,
Alberto Moure,
Marisol Martín-González,
José F. Fernández
Abstract:
We show here for the first time the use of a cold sintering process (CSP) to sinter CoSb3-based thermoelectric materials. CSP at 150 °C for 90 min under a uniaxial pressure of 750 MPa yields pieces with a relative density of 86 %, which is increased to around 92 % after a post-annealing at temperatures > 500 °C in Ar atmosphere. The reported CSP produces Te doped-CoSb3 nanocomposites with similar…
▽ More
We show here for the first time the use of a cold sintering process (CSP) to sinter CoSb3-based thermoelectric materials. CSP at 150 °C for 90 min under a uniaxial pressure of 750 MPa yields pieces with a relative density of 86 %, which is increased to around 92 % after a post-annealing at temperatures > 500 °C in Ar atmosphere. The reported CSP produces Te doped-CoSb3 nanocomposites with similar morphological and structural characteristics to the starting nanopowders obtained by ball milling in air atmosphere. The post-thermal treatment induces grain coalescence and grain growth, crystallite size growth as well as compositional changes in the nanocomposite, decreasing the amount of the main phase, CoSb3, and increasing the weight of secondary phase, CoSb2, up to a 30 wt% at 600 °C. Remarkably, the average valence for the Co, Sb and Te absorbing atoms is neither transformed by the sintering process nor by the subsequent heat treatment. The functional response of the sintered thermoelectric nanocomposites exhibits a maximum figure of merit of 0.12(3) at room temperature for the nanocomposites sintered by CSP with a subsequent post-annealing at 500 °C. This is mainly due to its low thermal conductivity in comparison with similar powders sintered by other approaches, and it is explained by the morphological and structural properties. These findings represent an attractive alternative for obtaining efficient thermoelectric skutterudites by a scalable and cost-effective route.
△ Less
Submitted 24 September, 2023;
originally announced September 2023.
-
Synthesis and luminescence properties of electrodeposited ZnO Films
Authors:
C. V. Manzano,
D. Alegre,
O. Caballero-Calero,
B. Alén,
M. S. Martín-González
Abstract:
ZnO films have been grown on gold (111) by electrodeposition using two different OH- sources, nitrate and peroxide, in order to obtain a comparative study between these films. The morphology, structural and optical characterization of the films were investigated depending on the solution used (nitrate and peroxide) and the applied potential. Scanning Electron Microscopy pictures show different mor…
▽ More
ZnO films have been grown on gold (111) by electrodeposition using two different OH- sources, nitrate and peroxide, in order to obtain a comparative study between these films. The morphology, structural and optical characterization of the films were investigated depending on the solution used (nitrate and peroxide) and the applied potential. Scanning Electron Microscopy pictures show different morphologies in each case. X-Ray Diffraction confirms that the films are pure ZnO oriented along the (0002) direction. ZnO films have been studied by photoluminescence to identify the emission of defects in the visible range. A consistent model that explains the emissions for the different electrodeposited ZnO films is proposed. We have associated the green and yellow emissions to a transition from the donor OH- to the acceptor zinc vacancies (VZn-) and to interstitial oxygen (Oi0), respectively. The orange-red emission is probably due to transitions from the conducting band to Oi- and OZn 0 defects and the infrared emission to transition from these Oi -/2- and OZn 0/- defects to the valence band.
△ Less
Submitted 14 July, 2011;
originally announced July 2011.
