-
Experimental assessment of the effective friction at the base of granular chute flows on smooth incline
Authors:
Olivier Roche,
Siet van den Wildenberg,
Alexandre Valance,
Renaud Delannay,
Anne Mangeney,
Lucas Corna,
Thierry Latchimy
Abstract:
We report on direct measurements of the basal force components for granular material flowing down a smooth incline. We investigate granular flows for a large range of inclination angles from teta=13.4° to 83.6° and various gate opening of the chute. We find that the effective basal friction coefficient, muB, obtained from the ratio of the longitudinal force to the normal one exhibits a systematic…
▽ More
We report on direct measurements of the basal force components for granular material flowing down a smooth incline. We investigate granular flows for a large range of inclination angles from teta=13.4° to 83.6° and various gate opening of the chute. We find that the effective basal friction coefficient, muB, obtained from the ratio of the longitudinal force to the normal one exhibits a systematic increase with increasing slope angle and a significant weakening with increasing particle hold-up H (the depth-integrated particle volume fraction). At low angles, the basal friction is slightly less than or equal to tan(teta). The deviation from tan(teta) can be interpreted as a contribution from the side-wall to the overall friction. At larger angles, the basal friction muB saturates at an asymptotic value that is dependent on the gate opening of the chute. Importantly, our data confirm the outcomes of recent discrete numerical simulations. First, for steady and fully developed flows as well as for moderately accelerated ones, the variation of the basal friction can be captured through a unique dimensionless number, the Froude number Fr, defined as Fr=U/(gHcos(teta))^1/2, where U is the mean flow velocity. Second, the mean velocity scales with the particle hold-up H with a power exponent close to 1/4, contrasting with the Bagnold scaling (U~H^3/2).
△ Less
Submitted 1 March, 2021;
originally announced March 2021.
-
Acoustic emissions of nearly steady and uniform granular flows: a proxy for flow dynamics and velocity fluctuations
Authors:
Vincent Bachelet,
Anne Mangeney,
Renaud Toussaint,
Julien DeRosny,
Maxime Farin,
Clément Hibert
Abstract:
The seismic waves emitted during granular flows are generated by different sources: high frequencies by inter-particle shocks and low frequencies by global motion and large scale deformation. To unravel these different mechanisms, an experimental study has been performed on the seismic waves emitted by dry quasi steady granular flows. The emitted seismic waves were recorded using shock acceleromet…
▽ More
The seismic waves emitted during granular flows are generated by different sources: high frequencies by inter-particle shocks and low frequencies by global motion and large scale deformation. To unravel these different mechanisms, an experimental study has been performed on the seismic waves emitted by dry quasi steady granular flows. The emitted seismic waves were recorded using shock accelerometers and the flow dynamics were captured with a fast camera. The mechanical characteristics of the particle shocks were analyzed, along with the duration between shocks and the correlations in the particle motion. The high-frequency seismic waves (1-50 kHz) were found to originate from particle shocks and waves trapped in the flowing layer. The low-frequency waves (20-60 Hz) were generated by the oscillations of the particles along their trajectories, i.e. from cycles of dilation/compression during the shear. The profiles of granular temperature (i.e. the square of particle velocity fluctuations) and average velocity were measured and related to the average properties of the flow as well as to the slope angle and flow thickness. These profiles were then used in a simple steady granular flow model to predict the radiated seismic energy and the energetic efficiency, i.e. the fraction of the flow potential energy converted to seismic energy. Scaling laws relating the seismic power, the shear strain rate and the inertial number were derived. In particular, the emitted seismic power is proportional to the granular temperature, which is also related to the mean flow velocity.
△ Less
Submitted 11 January, 2021;
originally announced January 2021.
-
2D granular flows with the $μ(I)$ rheology and side walls friction: a well balanced multilayer discretization
Authors:
E. D. Fernández-Nieto,
J. Garres-Díaz,
A. Mangeney,
G. Narbona-Reina
Abstract:
We present here numerical modelling of granular flows with the $μ(I)$ rheology in confined channels. The contribution is twofold: (i) a model to approximate the Navier-Stokes equations with the $μ(I)$ rheology through an asymptotic analysis. Under the hypothesis of a one-dimensional flow, this model takes into account side walls friction; (ii) a multilayer discretization following Fernández-Nieto…
▽ More
We present here numerical modelling of granular flows with the $μ(I)$ rheology in confined channels. The contribution is twofold: (i) a model to approximate the Navier-Stokes equations with the $μ(I)$ rheology through an asymptotic analysis. Under the hypothesis of a one-dimensional flow, this model takes into account side walls friction; (ii) a multilayer discretization following Fernández-Nieto et al. (J. Fluid Mech., vol. 798, 2016, pp. 643-681). In this new numerical scheme, we propose an appropriate treatment of the rheological terms through a hydrostatic reconstruction which allows this scheme to be well-balanced and therefore to deal with dry areas. Based on academic tests, we first evaluate the influence of the width of the channel on the normal profiles of the downslope velocity thanks to the multilayer approach that is intrinsically able to describe changes from Bagnold to S-shaped (and vice versa) velocity profiles. We also check the well balance property of the proposed numerical scheme. We show that approximating side walls friction using single-layer models may lead to strong errors. Secondly, we compare the numerical results with experimental data on granular collapses. We show that the proposed scheme allows us to qualitatively reproduce the deposit in the case of a rigid bed (i. e. dry area) and that the error made by replacing the dry area by a small layer of material may be large if this layer is not thin enough. The proposed model is also able to reproduce the time evolution of the free surface and of the flow/no-flow interface. In addition, it reproduces the effect of erosion for granular flows over initially static material lying on the bed. This is possible when using a variable friction coefficient $μ(I)$ but not with a constant friction coefficient.
△ Less
Submitted 5 July, 2017;
originally announced July 2017.
-
Memory of the Unjamming Transition during Cyclic Tiltings of a Granular Pile
Authors:
Stephanie Deboeuf,
Olivier Dauchot,
Lydie Staron,
Anne Mangeney,
Jean-Pierre Vilotte
Abstract:
Discrete numerical simulations are performed to study the evolution of the micro-structure and the response of a granular packing during successive loading-unloading cycles, consisting of quasi-static rotations in the gravity field between opposite inclination angles. We show that internal variables, e.g., stress and fabric of the pile, exhibit hysteresis during these cycles due to the explorati…
▽ More
Discrete numerical simulations are performed to study the evolution of the micro-structure and the response of a granular packing during successive loading-unloading cycles, consisting of quasi-static rotations in the gravity field between opposite inclination angles. We show that internal variables, e.g., stress and fabric of the pile, exhibit hysteresis during these cycles due to the exploration of different metastable configurations. Interestingly, the hysteretic behaviour of the pile strongly depends on the maximal inclination of the cycles, giving evidence of the irreversible modifications of the pile state occurring close to the unjamming transition. More specifically, we show that for cycles with maximal inclination larger than the repose angle, the weak contact network carries the memory of the unjamming transition. These results demonstrate the relevance of a two-phases description -strong and weak contact networks- for a granular system, as soon as it has approached the unjamming transition.
△ Less
Submitted 23 September, 2005; v1 submitted 20 June, 2005;
originally announced June 2005.
