Showing 1–16 of 16 results for author: Mallory, S A

Sedimentation equilibrium as a probe of the pressure equation of state of active colloids

Authors: Yunhee Choi, Elijah Schiltz-Rouse, Parvin Bayati, Stewart A. Mallory

Abstract: We introduce a theoretical and computational framework for extracting the pressure equation of state (EoS) of an active suspension from its steady-state sedimentation profile. As EoSs are prerequisites for many theories in active matter, determining how pressure depends on key parameters such as density, activity, and interparticle interactions is essential to make quantitative predictions relevan… ▽ More We introduce a theoretical and computational framework for extracting the pressure equation of state (EoS) of an active suspension from its steady-state sedimentation profile. As EoSs are prerequisites for many theories in active matter, determining how pressure depends on key parameters such as density, activity, and interparticle interactions is essential to make quantitative predictions relevant to materials design and engineering applications. Focusing on the one-dimensional active Brownian particle (1D-ABP) model, we show that the pressure measured in a homogeneous periodic system can be recovered from the spatial profiles established in sedimentation equilibrium. Our approach is based on exact mechanical considerations and provides a direct route for determining pressure from experimentally measurable quantities. This work compares sedimentation-derived equations of state with those obtained from periodic simulations, establishing a foundation for using sedimentation as a generic tool to characterize the behavior of active suspensions. △ Less

Submitted 20 June, 2025; originally announced June 2025.

Comments: (11 pages, 5 figures) Comments Welcome!

Single-File Diffusion of Active Brownian Particles

Authors: A. Akintunde, P. Bayati, H. Row, S. A. Mallory

Abstract: Single-file diffusion (SFD) is a key mechanism underlying transport phenomena in confined physical and biological systems. In a typical SFD process, microscopic particles are restricted to moving in a narrow channel where they cannot pass one another, resulting in constrained motion and anomalous long-time diffusion. In this study, we use Brownian dynamics simulations and analytical theory to inve… ▽ More Single-file diffusion (SFD) is a key mechanism underlying transport phenomena in confined physical and biological systems. In a typical SFD process, microscopic particles are restricted to moving in a narrow channel where they cannot pass one another, resulting in constrained motion and anomalous long-time diffusion. In this study, we use Brownian dynamics simulations and analytical theory to investigate the SFD of athermal active Brownian particles (ABPs), a minimal model of active colloids. Building on prior work (Phys. Rev. E 108, 064601 (2023)), where the kinetic temperature, pressure, and compressibility of the single-file ABP system were derived, we develop an accurate analytical expression for the mean square displacement (MSD) of a tagged particle. We find that the MSD exhibits ballistic behavior at short times, governed by the reduced kinetic temperature of the system. At long times, the characteristic subdiffusive scaling of SFD, $\langle (Δx)^2 \rangle \sim t^{1/2}$, is preserved. However, self-propulsion introduces significant changes to the 1D mobility, which we directly relate to the system's compressibility. Furthermore, we demonstrate that the generalized 1D mobility, originally proposed by Kollmann for equilibrium systems (Phys. Rev. Lett. 90, 180602 (2003)), can be extended to active systems with minimal modification. These findings provide a framework for understanding particle transport in active systems and for tuning transport properties at the microscale, particularly in geometries where motion is highly restricted. △ Less

Submitted 26 May, 2025; v1 submitted 13 November, 2024; originally announced November 2024.

Journal ref: J. Chem. Phys. 162, 164902 (2025)

Orbits, spirals, and trapped states: Dynamics of a phoretic Janus particle in a radial concentration gradient

Authors: Parvin Bayati, Stewart A. Mallory

Abstract: A longstanding goal in colloidal active matter is to understand how gradients in fuel concentration influence the motion of phoretic Janus particles. Here, we present a theoretical description of the motion of a spherical phoretic Janus particle in the presence of a radial gradient of the chemical solute driving self-propulsion. Radial gradients are a geometry relevant to many scenarios in active… ▽ More A longstanding goal in colloidal active matter is to understand how gradients in fuel concentration influence the motion of phoretic Janus particles. Here, we present a theoretical description of the motion of a spherical phoretic Janus particle in the presence of a radial gradient of the chemical solute driving self-propulsion. Radial gradients are a geometry relevant to many scenarios in active matter systems and naturally arise due to the presence of a point source or sink of fuel. We derive an analytical solution for the Janus particle's velocity and quantify the influence of the radial concentration gradient on the particle's trajectory. Compared to a phoretic Janus particle in a linear gradient in fuel concentration, we uncover a much richer set of dynamical behaviors, including circular orbits and trapped stationary states. We identify the ratio of the phoretic mobilities between the two domains of the Janus particle as a central quantity in tuning their dynamics. Our results provide a path for developing novel protocols for tuning the dynamics of phoretic Janus particles and mixing fluid at the microscale. In addition, this work suggests a method for quantifying the surface properties of phoretic Janus particles, which have proven challenging to probe experimentally. △ Less

Submitted 26 May, 2025; v1 submitted 15 April, 2024; originally announced April 2024.

Journal ref: ACS Nano 2024, 18, 34, 23047-23057

Kinetic temperature and pressure of an active Tonks gas

Authors: Elijah Schiltz-Rouse, Hyeongjoo Row, Stewart A. Mallory

Abstract: Using computer simulation and analytical theory, we study an active analog of the well-known Tonks gas, where active Brownian particles are confined to a one-dimensional (1D) channel. By introducing the notion of a kinetic temperature, we derive an accurate analytical expression for the pressure and clarify the paradoxical behavior where active Brownian particles confined to 1D exhibit anomalous c… ▽ More Using computer simulation and analytical theory, we study an active analog of the well-known Tonks gas, where active Brownian particles are confined to a one-dimensional (1D) channel. By introducing the notion of a kinetic temperature, we derive an accurate analytical expression for the pressure and clarify the paradoxical behavior where active Brownian particles confined to 1D exhibit anomalous clustering but no motility-induced phase transition. More generally, this work provides a deeper understanding of pressure in active systems as we uncover a unique link between the kinetic temperature and swim pressure valid for active Brownian particles in higher dimensions. △ Less

Submitted 5 January, 2024; v1 submitted 26 April, 2023; originally announced April 2023.

Comments: 4 page main text + 3 page SI. Simulation videos available at: https://www.dropbox.com/sh/3jz9bmgv1gfbfd1/AACj8DoMqXtg7U0OKpjkQrMaa?dl=0

Journal ref: Phys. Rev. E 108, 064601 (2023)

Mechanical Theory of Nonequilibrium Coexistence and Motility-Induced Phase Separation

Authors: Ahmad K. Omar, Hyeongjoo Row, Stewart A. Mallory, John F. Brady

Abstract: Nonequilibrium phase transitions are routinely observed in both natural and synthetic systems. The ubiquity of these transitions highlights the conspicuous absence of a general theory of phase coexistence that is broadly applicable to both nonequilibrium and equilibrium systems. Here, we present a general mechanical theory for phase separation rooted in ideas explored nearly a half-century ago in… ▽ More Nonequilibrium phase transitions are routinely observed in both natural and synthetic systems. The ubiquity of these transitions highlights the conspicuous absence of a general theory of phase coexistence that is broadly applicable to both nonequilibrium and equilibrium systems. Here, we present a general mechanical theory for phase separation rooted in ideas explored nearly a half-century ago in the study of inhomogeneous fluids. The core idea is that the mechanical forces within the interface separating two coexisting phases uniquely determine coexistence criteria, regardless of whether a system is in equilibrium or not. We demonstrate the power and utility of this theory by applying it to active Brownian particles, predicting a quantitative phase diagram for motility-induced phase separation in both two and three dimensions. This formulation additionally allows for the prediction of novel interfacial phenomena, such as an increasing interface width while moving deeper into the two-phase region, a uniquely nonequilibrium effect confirmed by computer simulations. The self-consistent determination of bulk phase behavior and interfacial phenomena offered by this mechanical perspective provide a concrete path forward towards a general theory for nonequilibrium phase transitions. △ Less

Submitted 29 May, 2023; v1 submitted 22 November, 2022; originally announced November 2022.

Journal ref: Proc. Natl. Acad. Sci. U.S.A. 120, e2219900120 (2023)

Self-assembly of active amphiphilic Janus particles

Authors: S. A. Mallory, F. Alarcon, A. Cacciuto, C. Valeriani

Abstract: In this article, we study the phenomenology of a two dimensional dilute suspension of active amphiphilic Janus particles. We analyze how the morphology of the aggregates emerging from their self-assembly depends on the strength and the direction of the active forces. We systematically explore and contrast the phenomenologies resulting from particles with a range of attractive patch coverages. Fina… ▽ More In this article, we study the phenomenology of a two dimensional dilute suspension of active amphiphilic Janus particles. We analyze how the morphology of the aggregates emerging from their self-assembly depends on the strength and the direction of the active forces. We systematically explore and contrast the phenomenologies resulting from particles with a range of attractive patch coverages. Finally, we illustrate how the geometry of the colloids and the directionality of their interactions can be used to control the physical properties of the assembled active aggregates and suggest possible strategies to exploit self-propulsion as a tunable driving force for self-assembly. △ Less

Submitted 23 February, 2021; originally announced February 2021.

Journal ref: New journal of Physics, 19 125014 (2017)

An active approach to colloidal self-assembly

Authors: S. A. Mallory, C. Valeriani, A. Cacciuto

Abstract: In this review we discuss recent advances in the self-assembly of self-propelled colloidal particles and highlight some of the most exciting results in this field with a specific focus on dry active matter. We explore this phenomenology through the lens of the complexity of the colloidal building blocks. We begin by considering the behavior of isotropic spherical particles. We then discuss the cas… ▽ More In this review we discuss recent advances in the self-assembly of self-propelled colloidal particles and highlight some of the most exciting results in this field with a specific focus on dry active matter. We explore this phenomenology through the lens of the complexity of the colloidal building blocks. We begin by considering the behavior of isotropic spherical particles. We then discuss the case of amphiphilic and dipolar Janus particles. Finally, we show how the geometry of the colloids and/or the directionality of their interactions can be used to control the physical properties of the assembled active aggregates, and suggest possible strategies on how to exploit activity as a tunable driving force for self-assembly. The unique properties of active colloids lend promise for the design of the next generation of functional, environment-sensing microstructures able to perform specific tasks in an autonomous and targeted manner. △ Less

Submitted 23 February, 2021; originally announced February 2021.

Journal ref: Ann Rev Phys Chem, 69, 59 (2018)

The "isothermal" compressibility of active matter

Authors: Austin R. Dulaney, Stewart A. Mallory, John F. Brady

Abstract: We demonstrate that the mechanically-defined "isothermal" compressibility behaves as a thermodynamic-like response function for suspensions of active Brownian particles. The compressibility computed from the active pressure - a combination of the collision and unique swim pressures - is capable of predicting the critical point for motility induced phase separation, as expected from the mechanical… ▽ More We demonstrate that the mechanically-defined "isothermal" compressibility behaves as a thermodynamic-like response function for suspensions of active Brownian particles. The compressibility computed from the active pressure - a combination of the collision and unique swim pressures - is capable of predicting the critical point for motility induced phase separation, as expected from the mechanical stability criterion. We relate this mechanical definition to the static structure factor via an active form of the thermodynamic compressibility equation and find the two to be equivalent, as would be the case for equilibrium systems. This equivalence indicates that compressibility behaves like a thermodynamic response function, even when activity is large. Finally, we discuss the importance of the phase interface when defining an active chemical potential. Previous definitions of the active chemical potential are shown to be accurate above the critical point but breakdown in the coexistence region. Inclusion of the swim pressure in the mechanical compressibility definition suggests that the interface is essential for determining phase behavior. △ Less

Submitted 23 September, 2020; originally announced September 2020.

Dynamic Overlap Concentration Scale of Active Colloids

Authors: Stewart A. Mallory, Ahmad K. Omar, John F. Brady

Abstract: By introducing the notion of a dynamic overlap concentration scale, we identify universal and previously unreported features of the mechanical properties of active colloids. These features are codified by recognizing that the characteristic length scale of an active particle's trajectory, the run-length, introduces a new concentration scale $φ^*$. Large-scale simulations of repulsive active Browni… ▽ More By introducing the notion of a dynamic overlap concentration scale, we identify universal and previously unreported features of the mechanical properties of active colloids. These features are codified by recognizing that the characteristic length scale of an active particle's trajectory, the run-length, introduces a new concentration scale $φ^*$. Large-scale simulations of repulsive active Brownian particles (ABPs) confirm that this new run-length dependent concentration, which is the trajectory-space analogue of the overlap concentration in polymer solutions, delineates distinct concentration regimes in which interparticle collisions alter particle trajectories. Using $φ^*$ and concentration scales associated with colloidal jamming, the mechanical equation-of-state for ABPs can be collapsed onto a set of principal curves that contain a number of previously overlooked features. The inclusion of these features qualitatively alters previous predictions of the behavior for active colloids as we demonstrate by computing the spinodal for a suspension of purely-repulsive ABPs. Our findings suggest that dynamic overlap concentration scales should be of great utility in unraveling the behavior of active and driven systems. △ Less

Submitted 13 September, 2020; originally announced September 2020.

Universal reshaping of arrested colloidal gels via active doping

Authors: S. A. Mallory, M. L. Bowers, A. Cacciuto

Abstract: Colloids that interact via a short-range attraction serve as the primary building blocks for a broad range of self-assembled materials. However, one of the well-known drawbacks to this strategy is that these building blocks rapidly and readily condense into a metastable colloidal gel. Using computer simulations, we illustrate how the addition of a small fraction of purely repulsive self-propelled… ▽ More Colloids that interact via a short-range attraction serve as the primary building blocks for a broad range of self-assembled materials. However, one of the well-known drawbacks to this strategy is that these building blocks rapidly and readily condense into a metastable colloidal gel. Using computer simulations, we illustrate how the addition of a small fraction of purely repulsive self-propelled colloids, a technique referred to as active doping, can prevent the formation of this metastable gel state and drive the system toward its thermodynamically favored crystalline target structure. The simplicity and robust nature of this strategy offers a systematic and generic pathway to improving the self-assembly of a large number of complex colloidal structures. We discuss in detail the process by which this feat is accomplished and provide quantitative metrics for exploiting it to modulate self-assembly. We provide evidence for the generic nature of this approach by demonstrating that it remains robust under a number of different anisotropic short-ranged pair interactions in both two and three dimensions. In addition, we report on a novel microphase in mixtures of passive and active colloids. For a broad range of self-propelling velocities, it is possible to stabilize a suspension of fairly monodisperse finite-size crystallites. Surprisingly, this microphase is also insensitive to the underlying pair interaction between building blocks. The active stabilization of these moderately-sized monodisperse clusters is quite remarkable and should be of great utility in the design of hierarchical self-assembly strategies. This work further bolsters the notion that active forces can play a pivotal role in directing colloidal self-assembly. △ Less

Submitted 14 September, 2020; v1 submitted 3 June, 2020; originally announced June 2020.

Comments: Supplemental Material available here: https://aip.scitation.org/doi/suppl/10.1063/5.0016514

Activity-assisted self-assembly of colloidal particles

Authors: S. A. Mallory, A. Cacciuto

Abstract: We outline a basic strategy of how self-propulsion can be used to improve the yield of a typical colloidal self-assembly process. The success of this approach is predicated on the thoughtful design of the colloidal building block as well as how self-propulsion is endowed to the particle. As long as a set of criteria are satisfied, it is possible to significantly increase the rate of self-assembly,… ▽ More We outline a basic strategy of how self-propulsion can be used to improve the yield of a typical colloidal self-assembly process. The success of this approach is predicated on the thoughtful design of the colloidal building block as well as how self-propulsion is endowed to the particle. As long as a set of criteria are satisfied, it is possible to significantly increase the rate of self-assembly, and greatly expand the window in parameter space where self-assembly can occur. In addition, we show that by tuning the relative on/off time of the self-propelling force it is possible to modulate the effective speed of the colloids allowing for further optimization of the self-assembly process. △ Less

Submitted 3 August, 2016; v1 submitted 16 June, 2016; originally announced June 2016.

Journal ref: Phys. Rev. E 94, 022607 (2016)

Anomalous dynamics of an elastic membrane in an active fluid

Authors: S. A. Mallory, C. Valeriani, A. Cacciuto

Abstract: Using numerical simulations, we characterized the behavior of an elastic membrane immersed in an active fluid. Our findings reveal a nontrivial folding and re-expansion of the membrane that is controlled by the interplay of its resistance to bending and the self-propulsion strength of the active components in solution. We show how flexible membranes tend to collapse into multi-folded states, where… ▽ More Using numerical simulations, we characterized the behavior of an elastic membrane immersed in an active fluid. Our findings reveal a nontrivial folding and re-expansion of the membrane that is controlled by the interplay of its resistance to bending and the self-propulsion strength of the active components in solution. We show how flexible membranes tend to collapse into multi-folded states, whereas stiff membranes oscillates between an extended configuration and a singly folded state. This study provides a simple example of how to exploit the random motion of active particles to perform mechanical work at the micro-scale. △ Less

Submitted 6 May, 2015; originally announced May 2015.

Journal ref: Phys. Rev. E 92, 012314 (2015)

The role of particle shape in active depletion

Authors: J. Harder, S. A. Mallory, C. Tung, C. Valeriani, A. Cacciuto

Abstract: Using numerical simulations, we study how a solution of small active disks, acting as depletants, induces effective interactions on large passive colloids. Specifically, we analyze how the range, strength, and sign of these interactions are crucially dependent on the shape of the colloids. Our findings indicate that while colloidal rods experience a long-ranged predominantly attractive interaction… ▽ More Using numerical simulations, we study how a solution of small active disks, acting as depletants, induces effective interactions on large passive colloids. Specifically, we analyze how the range, strength, and sign of these interactions are crucially dependent on the shape of the colloids. Our findings indicate that while colloidal rods experience a long-ranged predominantly attractive interaction, colloidal disks feel a purely repulsive force that is short-ranged in nature and grows in strength with the size ratio between the colloids and active depletants. For colloidal rods, simple scaling arguments are proposed to characterize the strength of these induced interactions. △ Less

Submitted 18 November, 2014; v1 submitted 24 July, 2014; originally announced July 2014.

Curvature Induced Activation of a Passive Tracer in an Active Bath

Authors: S. A. Mallory, C. Valeriani, A. Cacciuto

Abstract: We use numerical simulations to study the motion of a large asymmetric tracer immersed in a low density suspension of self-propelled nanoparticles in two dimensions. Specifically, we analyze how the curvature of the tracer affects its translational and rotational motion in an active environment. We find that even very small amounts of curvature are sufficient for the active bath to impart directed… ▽ More We use numerical simulations to study the motion of a large asymmetric tracer immersed in a low density suspension of self-propelled nanoparticles in two dimensions. Specifically, we analyze how the curvature of the tracer affects its translational and rotational motion in an active environment. We find that even very small amounts of curvature are sufficient for the active bath to impart directed motion to the tracer which results in its effective activation. We propose simple scaling arguments to characterize this induced activity in terms of the curvature of the tracer and the strength of the self-propelling force. Our results suggest new ways of controlling the transport properties of passive tracers in an active medium by carefully tailoring their geometry. △ Less

Submitted 25 September, 2014; v1 submitted 12 July, 2014; originally announced July 2014.

Journal ref: Physical Review E 90, 032309 (2014)

Anomalous Thermomechanical Properties of a Self-propelled Colloidal Fluid

Authors: S. A. Mallory, A. Šarić, C. Valeriani, A. Cacciuto

Abstract: We use numerical simulations to compute the equation of state of a suspension of spherical, self-propelled nanoparticles. We study in detail the effect of excluded volume interactions and confinement as a function of the system temperature, concentration and strength of the propulsion. We find a striking non-monotonic dependence of the pressure with the temperature, and provide simple scaling argu… ▽ More We use numerical simulations to compute the equation of state of a suspension of spherical, self-propelled nanoparticles. We study in detail the effect of excluded volume interactions and confinement as a function of the system temperature, concentration and strength of the propulsion. We find a striking non-monotonic dependence of the pressure with the temperature, and provide simple scaling arguments to predict and explain the occurrence of such an anomalous behavior. We conclude the paper by explicitly showing how our results have an important implications for the effective forces exerted by fluids of self-propelled particles on passive, larger components. △ Less

Submitted 9 May, 2014; v1 submitted 2 October, 2013; originally announced October 2013.

Journal ref: Physical Review E 89, 052303 (2014)

Bulk measurement of copper and sodium content in CuIn(0.7)Ga(0.3)Se(2) (CIGS) solar cells with nanosecond pulse length laser induced breakdown spectroscopy (LIBS)

Authors: Jeremy M. D. Kowalczyk, Jeffrey J. Perkins, Alexander DeAngelis, Jess Kaneshiro, Stewart A. Mallory, Yuancheng Chang, Nicolas Gaillard

Abstract: In this work, we show that laser induced breakdown spectroscopy (LIBS) with a nanosecond pulse laser can be used to measure the copper and sodium content of CuIn(0.7)Ga(0.3)Se(2) (CIGS) thin film solar cells on molybdenum. This method has four significant advantages over methods currently being employed: the method is inexpensive, measurements can be taken in times on the order of one second, with… ▽ More In this work, we show that laser induced breakdown spectroscopy (LIBS) with a nanosecond pulse laser can be used to measure the copper and sodium content of CuIn(0.7)Ga(0.3)Se(2) (CIGS) thin film solar cells on molybdenum. This method has four significant advantages over methods currently being employed: the method is inexpensive, measurements can be taken in times on the order of one second, without high vacuum, and at distances up to 5 meters or more. The final two points allow for in-line monitoring of device fabrication in laboratory or industrial environments. Specifically, we report a linear relationship between the copper and sodium spectral lines from LIBS and the atomic fraction of copper and sodium measured via secondary ion mass spectroscopy (SIMS), discuss the ablation process of this material with a nanosecond pulse laser compared to shorter pulse duration lasers, and examine the depth resolution of nanosecond pulse LIBS. △ Less

Submitted 7 January, 2013; originally announced January 2013.