Showing 1–50 of 71 results for author: Malik, S

Integrated phononic waveguide on thin-film lithium niobate on diamond

Authors: Sultan Malik, Felix M. Mayor, Wentao Jiang, Hyunseok Oh, Carl Padgett, Viraj Dharod, Jayameenakshi Venkatraman, Ania C. Bleszynski Jayich, Amir H. Safavi-Naeini

Abstract: We demonstrate wavelength-scale phononic waveguides formed by transfer-printed thin-film lithium niobate (LN) on bulk diamond (LNOD), a material stack that combines the strong piezoelectricity of LN with the high acoustic velocity and color-center compatibility of diamond. We characterize a delay line based on a 100 micron long phononic waveguide at room and cryogenic temperatures. The total inser… ▽ More We demonstrate wavelength-scale phononic waveguides formed by transfer-printed thin-film lithium niobate (LN) on bulk diamond (LNOD), a material stack that combines the strong piezoelectricity of LN with the high acoustic velocity and color-center compatibility of diamond. We characterize a delay line based on a 100 micron long phononic waveguide at room and cryogenic temperatures. The total insertion loss through the device at 4 kelvin is -5.8 dB, corresponding to a >50% transducer efficiency, at a frequency of 2.8 gigahertz. Our work represents a step towards phonon-mediated hybrid quantum systems consisting of strain-sensitive color centers in diamond. △ Less

Submitted 29 May, 2025; originally announced May 2025.

Comments: 6 pages, 4 figures

Correlated Dephasing in a Piezoelectrically Transduced Silicon Phononic Waveguide

Authors: Oliver A. Hitchcock, Felix M. Mayor, Wentao Jiang, Matthew P. Maksymowych, Sultan Malik, Amir H. Safavi-Naeini

Abstract: Nanomechanical waveguides offer a multitude of applications in quantum and classical technologies. Here, we design, fabricate, and characterize a compact silicon single-mode phononic waveguide actuated by a thin-film lithium niobate piezoelectric element. Our device directly transduces between microwave frequency photons and phonons propagating in the silicon waveguide, providing a route for coupl… ▽ More Nanomechanical waveguides offer a multitude of applications in quantum and classical technologies. Here, we design, fabricate, and characterize a compact silicon single-mode phononic waveguide actuated by a thin-film lithium niobate piezoelectric element. Our device directly transduces between microwave frequency photons and phonons propagating in the silicon waveguide, providing a route for coupling to superconducting circuits. We probe the device at millikelvin temperatures through a superconducting microwave resonant matching cavity to reveal harmonics of the silicon waveguide and extract a piezoelectric coupling rate $g/2π= 1.1$ megahertz and a mechanical coupling rate $f/2π=5$ megahertz. Through time-domain measurements of the silicon mechanical modes, we observe energy relaxation timescales of $T_{1,\text{in}} \approx 500$ microseconds, pure dephasing timescales of $T_φ\approx {60}$ microseconds and dephasing dynamics that indicate the presence of an underlying frequency noise process with a non-uniform spectral distribution. We measure phase noise cross-correlations between silicon mechanical modes and observe detuning-dependent positively-correlated frequency fluctuations. Our measurements provide valuable insights into the dynamics and decoherence characteristics of hybrid piezoelectric-silicon acoustic devices, and suggest approaches for mitigating and circumventing noise processes for emerging quantum acoustic systems. △ Less

Submitted 22 February, 2025; originally announced February 2025.

Comments: 13 pages, 4 main figures, 3 appendix figures

Spray-Coated Graphene/Quantum Dots Paper-Based Photodetectors

Authors: S. Malik, Y. Zhao, Y. He, X. Zhao, H. Li, L. G. Occhipinti, M. Wang, S. Akhavan

Abstract: Paper is an ideal substrate for the development of flexible and environmentally sustainable ubiquitous electronic systems. When combined with nanomaterials, it can be harnessed for various Internet-of-Things applications, ranging from wearable electronics to smart packaging. In this study, we present a non-vacuum spray deposition of arrays of hybrid single layer graphene (SLG)-CsPbBr3 perovskite q… ▽ More Paper is an ideal substrate for the development of flexible and environmentally sustainable ubiquitous electronic systems. When combined with nanomaterials, it can be harnessed for various Internet-of-Things applications, ranging from wearable electronics to smart packaging. In this study, we present a non-vacuum spray deposition of arrays of hybrid single layer graphene (SLG)-CsPbBr3 perovskite quantum dots (QDs) photodetectors on a paper substrate. This approach combines the advantages of two large-area techniques: chemical vapor deposition (CVD) and spray-coating. The first technique allows for the pre-deposition of CVD SLG, while the second enables the spray coating of a mask to pattern CVD SLG, electrode contacts, and photoactive QDs layers. The prepared paper-based photodetectors achieved an external responsivity of 520 A/W under 405 nm illumination at <1V operating voltage. By fabricating arrays of photodetectors on a paper substrate in the air, this work highlights the potential of this scalable approach for enabling ubiquitous electronics on paper. △ Less

Submitted 29 November, 2023; originally announced November 2023.

Graphene-Quantum Dot Hybrid Photodetectors from 200 mm Wafer Scale Processing

Authors: Sha Li, Zhenxing Wang, Bianca Robertz, Daniel Neumaier, Oihana Txoperena, Arantxa Maestre, Amaia Zurutuza, Chris Bower, Ashley Rushton, Yinglin Liu, Chris Harris, Alexander Bessonov, Surama Malik, Mark Allen, Ivonne Medina-Salazar, Tapani Ryhänen, Max C. Lemme

Abstract: A 200 mm processing platform for the large-scale production of graphene field-effect transistor-quantum dot (GFET-QD) hybrid photodetectors is demonstrated. Comprehensive statistical analysis of electric data shows a high yield (96%) and low variation of the 200 mm scale fabrication. The GFET-QD devices deliver responsivities of 10${^5}$ - 10${^6}$ V/W in a wavelength range from 400 to 1800 nm, at… ▽ More A 200 mm processing platform for the large-scale production of graphene field-effect transistor-quantum dot (GFET-QD) hybrid photodetectors is demonstrated. Comprehensive statistical analysis of electric data shows a high yield (96%) and low variation of the 200 mm scale fabrication. The GFET-QD devices deliver responsivities of 10${^5}$ - 10${^6}$ V/W in a wavelength range from 400 to 1800 nm, at up to 100 frames per second. Spectral sensitivity compares well to that obtained using similar GFET-QD photodetectors. The device concept enables gate-tunable suppression or enhancement of the photovoltage, which may be exploited for electric shutter operation by toggling between the signal capture and shutter states. The devices show good stability at a wide operation range and external quantum efficiency of 20% in the short-wavelength infrared range. Furthermore, an integration solution with complementary metal-oxide-semiconductor technology is presented to realize image-sensor-array chips and a proof-of-concept image system. This work demonstrates the potential for the volume manufacture of infrared photodetectors for a wide range of imaging applications. △ Less

Submitted 1 March, 2023; originally announced March 2023.

Comments: 29 pages

Journal ref: Sci Rep 15, 14706 (2025)

Work Function Engineered Charge Plasma-Germanium Double Gate Tunnel Field Effect Transistor for Low-Power Switching Applications

Authors: Sambhu P. Malik, Ajeet K. Yadav, Robin Khosla

Abstract: Here, we propose a Charge Plasma (CP)-based Germanium Double Gate Tunnel Field-Effect Transistor (Ge-DGTFET) device structure, where a CP is induced in the heavily doped source region using the work function engineering of source electrode. The CP enables creation of electrical metallurgical junction and converts n-p-n to p-n-p-n structure of TFET and enhances the drain current, reliability, elimi… ▽ More Here, we propose a Charge Plasma (CP)-based Germanium Double Gate Tunnel Field-Effect Transistor (Ge-DGTFET) device structure, where a CP is induced in the heavily doped source region using the work function engineering of source electrode. The CP enables creation of electrical metallurgical junction and converts n-p-n to p-n-p-n structure of TFET and enhances the drain current, reliability, eliminate additional pocket ion-implantation. The proposed CP-Ge-DGTFET device structure revealed excellent electrical DC performance as compared to the conventional Ge-DGTFET device structure such as high ON current (ION), excellent ION/IOFF ratio, and low sub-threshold swing of ~4.7E-4 A/um, ~1.8E9, and ~5.23 mV/dec, respectively. Furthermore, analog/RF analyses revealed high transconductance, upright cut-off frequency, low overall capacitance, transit time, and power delay product. Therefore, the proposed CP-Ge-DGTFET device structure with alternate channel material Ge, High-\k{appa} Al2O3, and work function engineered CP in source region furnishes high performance and cost-effective solution for next-generation energy-efficient switching applications. △ Less

Submitted 28 December, 2022; originally announced December 2022.

Comments: 7 pages, 10 figures

Quantifying Dynamical Heterogeneity Length Scales of Interface Water across Model Membrane Phase Transition

Authors: Sheeba Malik, Smarajit Karmakar, Ananya Debnath

Abstract: All-atom molecular dynamics simulations of 1,2-dimyristoyl-sn-glycerol-3-phosphocholine lipid membranes reveal a membrane phase transition dictated drastic growth in the interface water (IW) heterogeneity length scales. It acts as an alternate probe to capture the ripple size of the membrane and follows an activated dynamical scaling with the relaxation time scale solely within the gel phase. The… ▽ More All-atom molecular dynamics simulations of 1,2-dimyristoyl-sn-glycerol-3-phosphocholine lipid membranes reveal a membrane phase transition dictated drastic growth in the interface water (IW) heterogeneity length scales. It acts as an alternate probe to capture the ripple size of the membrane and follows an activated dynamical scaling with the relaxation time scale solely within the gel phase. The results quantify the mostly unknown correlations between the spatio-temporal scales of the IW and membranes at various phases under physiological and supercooled condition △ Less

Submitted 12 December, 2022; v1 submitted 12 December, 2022; originally announced December 2022.

Element resolved evidence of superdiffusive terahertz spin current arising from ultrafast demagnetization process

Authors: R. Gupta, F. Cosco, R. S. Malik, X. Chen, S. Saha, A. Ghosh, T. Pohlmann, J. R. L. Mardegan, S. Francoual, R. Stefanuik, J. Soderstrom, B. Sanyal, O. Karis, P. Svedlindh, P. M. Oppeneer, R. Knut

Abstract: Using element-specific measurements of the ultrafast demagnetization of Ru/Fe$_{65}$Co$_{35}$ heterostructures, we show that Ru can exhibit a significant magnetic contrast (3% asymmetry) resulting from ultrafast spin currents emanating from the demagnetization process of the FeCo layer. We use this magnetic contrast to investigate how superdiffusive spin currents are affected by the doping of heav… ▽ More Using element-specific measurements of the ultrafast demagnetization of Ru/Fe$_{65}$Co$_{35}$ heterostructures, we show that Ru can exhibit a significant magnetic contrast (3% asymmetry) resulting from ultrafast spin currents emanating from the demagnetization process of the FeCo layer. We use this magnetic contrast to investigate how superdiffusive spin currents are affected by the doping of heavy elements in the FeCo layer. We find that the spin currents are strongly suppressed, and that the recovery process in Ru slows down, by Re doping. This is in accordance with a change in interface reflectivity of spin currents as found by the superdiffusive spin transport model. △ Less

Submitted 3 May, 2023; v1 submitted 16 May, 2022; originally announced May 2022.

Comments: 7 pages, 5 figures

Antisite disorder and phase segregation in Mn$_{2}$NiSn

Authors: S. V. Malik, E. T. Dias, A. K. Nigam, K. R. Priolkar

Abstract: A systematic study of crystal structure, local structure, magnetic and transport properties in quenched and temper annealed Ni$_{2-x}$Mn$_{1+x}$Sn alloys indicate the formation of Mn$_3$Sn type structural defects caused by an antisite disorder between Mn and Sn occupying the Y and Z sublattices of X$_2$YZ Heusler structure. The antisite disorder is caused by the substitution of Ni by Mn at the X s… ▽ More A systematic study of crystal structure, local structure, magnetic and transport properties in quenched and temper annealed Ni$_{2-x}$Mn$_{1+x}$Sn alloys indicate the formation of Mn$_3$Sn type structural defects caused by an antisite disorder between Mn and Sn occupying the Y and Z sublattices of X$_2$YZ Heusler structure. The antisite disorder is caused by the substitution of Ni by Mn at the X sites. On temper annealing, these defects segregate and phase separate into $L2_1$ Heusler and $D0_{19}$ Mn$_3$Sn type phases. △ Less

Submitted 13 January, 2022; originally announced January 2022.

Journal ref: J. Phys. D: Appl. Phys (2022)

Experimental confirmation of the delayed Ni demagnetization in FeNi alloy

Authors: Somnath Jana, Ronny Knut, Shreyas Muralidhar, Rameez Saeed Malik, Robert Stefanuik, Johan Åkerman, Olof Karis, Christian Schüßler-Langeheine, Niko Pontius

Abstract: Element-selective techniques are central for the understanding of ultrafast spin dynamics in multi-element materials like magnetic alloys. Recently, though, it turned out that the commonly used technique of transverse magneto-optical Kerr effect (T-MOKE) in the EUV range may have linearity issues including unwanted cross talk between different elemental signals. This problem can be sizeable, which… ▽ More Element-selective techniques are central for the understanding of ultrafast spin dynamics in multi-element materials like magnetic alloys. Recently, though, it turned out that the commonly used technique of transverse magneto-optical Kerr effect (T-MOKE) in the EUV range may have linearity issues including unwanted cross talk between different elemental signals. This problem can be sizeable, which puts recent observations of ultrafast spin transfer from Fe to Ni sites in FeNi alloys into question. In this study, we investigate the Fe-to-Ni spin transfer in a cross-talk-free time-resolved X-ray magnetic circular dichroism (XMCD) experiment with a reliable time reference. We find a very similar Fe and Ni dynamics with XMCD as with T-MOKE from identical samples. Considering the non-linearities of the T-MOKE response, the agreement with our findings appears fortuitous. We discuss possible reasons why T-MOKE seems to give accurate results in this case. Our data provide the ongoing discussion about ultrafast spin-transfer mechanisms in FeNi systems with a sound experimental basis. △ Less

Submitted 15 June, 2021; originally announced June 2021.

Materials Graph Transformer predicts the outcomes of inorganic reactions with reliable uncertainties

Authors: Shreshth A. Malik, Rhys E. A. Goodall, Alpha A. Lee

Abstract: A common bottleneck for materials discovery is synthesis. While recent methodological advances have resulted in major improvements in the ability to predicatively design novel materials, researchers often still rely on trial-and-error approaches for determining synthesis procedures. In this work, we develop a model that predicts the major product of solid-state reactions. The cardinal feature of t… ▽ More A common bottleneck for materials discovery is synthesis. While recent methodological advances have resulted in major improvements in the ability to predicatively design novel materials, researchers often still rely on trial-and-error approaches for determining synthesis procedures. In this work, we develop a model that predicts the major product of solid-state reactions. The cardinal feature of this approach is the construction of fixed-length, learned representations of reactions. Precursors are represented as nodes on a `reaction graph', and message-passing operations between nodes are used to embody the interactions between precursors in the reaction mixture. Through an ablation study, it is shown that this framework not only outperforms less physically-motivated baseline methods but also more reliably assesses the uncertainty in its predictions. △ Less

Submitted 3 September, 2020; v1 submitted 30 July, 2020; originally announced July 2020.

Journal ref: Chemistry of Materials 2021 33 (2), 616-624

Ultrafast magnetization dynamics in half-metallic Co$_2$FeAl Heusler alloy

Authors: R. S. Malik, E. K. Delczeg-Czirjak, D. Thonig, R. Knut, I. Vaskivskyi, R. Gupta, S. Jana, R. Stefanuik, Y. O. Kvashnin, S. Husain, A. Kumar, P. Svedlindh, J. Söderström, O. Eriksson, O. Karis

Abstract: We report on optically induced, ultrafast magnetization dynamics in the Heusler alloy $\mathrm{Co_{2}FeAl}$, probed by time-resolved magneto-optical Kerr effect. Experimental results are compared to results from electronic structure theory and atomistic spin-dynamics simulations. Experimentally, we find that the demagnetization time ($τ_{M}$) in films of $\mathrm{Co_{2}FeAl}$ is almost independent… ▽ More We report on optically induced, ultrafast magnetization dynamics in the Heusler alloy $\mathrm{Co_{2}FeAl}$, probed by time-resolved magneto-optical Kerr effect. Experimental results are compared to results from electronic structure theory and atomistic spin-dynamics simulations. Experimentally, we find that the demagnetization time ($τ_{M}$) in films of $\mathrm{Co_{2}FeAl}$ is almost independent of varying structural order, and that it is similar to that in elemental 3d ferromagnets. In contrast, the slower process of magnetization recovery, specified by $τ_{R}$, is found to occur on picosecond time scales, and is demonstrated to correlate strongly with the Gilbert damping parameter ($α$). Our results show that $\mathrm{Co_{2}FeAl}$ is unique, in that it is the first material that clearly demonstrates the importance of the damping parameter in the remagnetization process. Based on these results we argue that for $\mathrm{Co_{2}FeAl}$ the remagnetization process is dominated by magnon dynamics, something which might have general applicability. △ Less

Submitted 27 February, 2020; originally announced February 2020.

Journal ref: Phys. Rev. B 104, 100408 (2021)

Analysis of the linear relationship between asymmetry and magnetic moment at the M-edge of 3d transition metals

Authors: Somnath Jana, R. S. Malik, Yaroslav O. Kvashnin, Inka L. M. Locht, R. Knut, R. Stefanuik, Igor Di Marco, A. N. Yaresko, Martina Ahlberg, Raghuveer Chimata, Marco Battiato, Johan Söderström, Olle Eriksson, Olof Karis

Abstract: The magneto-optical response of Fe and Ni during ultrafast demagnetization is studied experimentally and theoretically. We have performed pump-probe experiments in the transverse magneto-optical Kerr effect (T-MOKE) geometry using photon energies that cover the M-absorption edges of Fe and Ni between 40 to 72 eV. The asymmetry was detected by measuring the reflection of light for two different ori… ▽ More The magneto-optical response of Fe and Ni during ultrafast demagnetization is studied experimentally and theoretically. We have performed pump-probe experiments in the transverse magneto-optical Kerr effect (T-MOKE) geometry using photon energies that cover the M-absorption edges of Fe and Ni between 40 to 72 eV. The asymmetry was detected by measuring the reflection of light for two different orientations of the sample magnetization. Density functional theory (DFT) wasused to calculate the magneto-optical response of different magnetic configurations, representing different types of excitations: long-wavelength magnons, short wavelength magnons, and Stoner excitations. In the case of Fe, we find that the calculated asymmetry is strongly dependent on the specific type of magnetic excitation. Our modelling also reveals that during remagnetization Fe is, to a reasonable approximation, described by magnons, even though small non-linear contributions could indicate some degree of Stoner excitations as well. In contrast, we find that the calculated asymmetry in Ni is rather insensitive to the type of magnetic excitations. However, there is a weak non-linearity in the relation between asymmetry and the off-diagonal component of the dielectric tensor, which does not originate from the modifications of the electronic structure. Our experimental and theoretical results thus emphasize the need of considering a coupling between asymmetry and magnetization that may be more complex that a simple linear relationship. This insight is crucial for the microscopic interpretation of ultrafast magnetization experiments. △ Less

Submitted 7 August, 2019; originally announced August 2019.

Journal ref: Phys. Rev. Research 2, 013180 (2020)

Exchange dependent ultrafast magnetization dynamics in Fe$_{1-x}$Ni$_{x}$ alloys

Authors: Somnath Jana, Ronny Knut, Erna K. Delczeg-Czirjak, Rameez S. Malik, Robert Stefanuik, Raghuveer Chimata, Dibya Phuyal, Venkata Mutta, Serkan Akansel, Daniel Primetzhofer, Martina Ahlberg, Johan Söderström, Johan Åkerman, Peter Svedlindh, Olle Eriksson, Olof Karis

Abstract: Element specific ultrafast demagnetization was studied in Fe$_{1-x}$Ni$_{x}$ alloys, covering the concentration range between $0.1<x<0.9$. For all compositions, we observe a delay in the onset of Ni demagnetization relative to the Fe demagnetization. We find that the delay is correlated to the Curie temperature and hence also the exchange interaction. The temporal evolution of demagnetization is f… ▽ More Element specific ultrafast demagnetization was studied in Fe$_{1-x}$Ni$_{x}$ alloys, covering the concentration range between $0.1<x<0.9$. For all compositions, we observe a delay in the onset of Ni demagnetization relative to the Fe demagnetization. We find that the delay is correlated to the Curie temperature and hence also the exchange interaction. The temporal evolution of demagnetization is fitted to a magnon diffusion model based on the presupposition of enhanced ultrafast magnon generation in the Fe sublattice. The spin wave stiffness extracted from this model correspond well to known experimental values. △ Less

Submitted 25 October, 2018; originally announced October 2018.

Inhomogeneous magnon scattering during ultrafast demagnetization

Authors: R. Knut, E. K. Delczeg-Czirjak, S. Jana, J. M. Shaw, H. T. Nembach, Y. Kvashnin, R. Stefaniuk, R. S. Malik, P. Grychtol, D. Zusin, C. Gentry, R. Chimata, M. Pereiro, J. Söderström, E. Turgut, M. Ahlberg, J. Åkerman, H. C. Kapteyn, M. M. Murnane, D. A. Arena, O. Eriksson, O. Karis, T. J. Silva

Abstract: Ni$_{0.8}$Fe$_{0.2}$ (Py) and Py alloyed with Cu exhibit intriguing ultrafast demagnetization behavior, where the Ni magnetic moment shows a delayed response relative to the Fe, an effect which is strongly enhanced by Cu alloying. We have studied a broad range of Cu concentrations to elucidate the effects of Cu alloying in Py. The orbital/spin magnetic moment ratios are largely unaffected by Cu al… ▽ More Ni$_{0.8}$Fe$_{0.2}$ (Py) and Py alloyed with Cu exhibit intriguing ultrafast demagnetization behavior, where the Ni magnetic moment shows a delayed response relative to the Fe, an effect which is strongly enhanced by Cu alloying. We have studied a broad range of Cu concentrations to elucidate the effects of Cu alloying in Py. The orbital/spin magnetic moment ratios are largely unaffected by Cu alloying, signifying that Cu-induced changes in the ultrafast demagnetization are not related to spin-orbit interactions. We show that magnon diffusion can explain the delayed Ni response, which we attribute to an enhanced magnon generation rate in the Fe sublattice relative to the Ni sublattice. Furthermore, Py exhibits prominent RKKY-like exchange interactions, which are strongly enhanced between Fe atoms and diminished between Ni atoms by Cu alloying. An increased Fe magnon scattering rate is expected to occur concurrently with this increased Fe-Fe exchange interaction, supporting the results obtained from the magnon diffusion model. △ Less

Submitted 25 October, 2018; originally announced October 2018.

Strain-gradient mapping of semiconductor quantum dots

Authors: P. -L De Assis, I Yeo, A Gloppe, H. A. Nguyen, D Tumanov, E Dupont-Ferrier, N. S. Malik, E Dupuy, J Claudon, J. -M Gérard, Alexia Auffèves, O Arcizet, Maxime Richard, J. -Ph Poizat

Abstract: In the context of fast developing quantum technologies, locating single quantum objects embedded in solid or fluid environment while keeping their properties unchanged is a crucial requirement as well as a challenge. Such "quantum microscopes" have been demonstrated already for NV-centers embedded in diamond [1], and for single atoms within an ultracold gas [2]. In this work, we demonstrate a new… ▽ More In the context of fast developing quantum technologies, locating single quantum objects embedded in solid or fluid environment while keeping their properties unchanged is a crucial requirement as well as a challenge. Such "quantum microscopes" have been demonstrated already for NV-centers embedded in diamond [1], and for single atoms within an ultracold gas [2]. In this work, we demonstrate a new method to determine non-destructively the position of randomly distributed semiconductor quantum dots (QDs) deeply embedded in a solid photonic waveguide. By setting the wire in an oscillating motion, we generate large stress gradients across the QDs plane. We then exploit the fact that the QDs emission frequency is highly sensitive to the local material stress [3-5] to infer their positions with an accuracy ranging from +/- 35 nm down to +/-1 nm for close-to-axis QDs. △ Less

Submitted 15 September, 2016; v1 submitted 21 July, 2016; originally announced July 2016.

Journal ref: Phys. Rev. Lett. 118, 117401 (2017)

Large and uniform optical emission shifts in quantum dots externally strained along their growth axis

Authors: Petr Stepanov, Marta Elzo Aizarna, Joël Bleuse, Nitin S. Malik, Yoann Curé, Eric Gautier, Vincent Favre-Nicolin, Jean-Michel Gérard, Julien Claudon

Abstract: We introduce a method which enables to directly compare the impact of elastic strain on the optical properties of distinct quantum dots (QDs). Specifically, the QDs are integrated in a cross-section of a semiconductor core wire which is surrounded by an amorphous straining shell. Detailed numerical simulations show that, thanks to the mechanical isotropy of the shell, the strain field in a core se… ▽ More We introduce a method which enables to directly compare the impact of elastic strain on the optical properties of distinct quantum dots (QDs). Specifically, the QDs are integrated in a cross-section of a semiconductor core wire which is surrounded by an amorphous straining shell. Detailed numerical simulations show that, thanks to the mechanical isotropy of the shell, the strain field in a core section is homogeneous. Furthermore, we use the core material as an in situ strain gauge, yielding reliable values for the emitter energy tuning slope. This calibration technique is applied to self-assembled InAs QDs submitted to incremental tensile strain along their growth axis. In contrast to recent studies conducted on similar QDs stressed perpendicularly to their growth axis, optical spectroscopy reveals 5-10 times larger tuning slopes, with a moderate dispersion. These results highlight the importance of the stress direction to optimise QD response to applied strain, with implications both in static and dynamic regimes. As such, they are in particular relevant for the development of wavelength-tunable single photon sources or hybrid QD opto-mechanical systems. △ Less

Submitted 22 February, 2016; originally announced February 2016.

Strain-mediated coupling in a quantum dot-mechanical oscillator hybrid system

Authors: Inah Yeo, Pierre-Louis de Assis, Arnaud Gloppe, Eva Dupont-Ferrier, Pierre Verlot, Nitin S. Malik, Emmanuel Dupuy, Julien Claudon, Jean-Michel Gérard, Alexia Auffèves, Gilles Nogues, Signes Seidelin, Jean-Philippe Poizat, Olivier Arcizet, Maxime Richard

Abstract: Recent progress in nanotechnology has allowed to fabricate new hybrid systems where a single two-level system is coupled to a mechanical nanoresonator. In such systems the quantum nature of a macroscopic degree of freedom can be revealed and manipulated. This opens up appealing perspectives for quantum information technologies, and for the exploration of quantum-classical boundary. Here we present… ▽ More Recent progress in nanotechnology has allowed to fabricate new hybrid systems where a single two-level system is coupled to a mechanical nanoresonator. In such systems the quantum nature of a macroscopic degree of freedom can be revealed and manipulated. This opens up appealing perspectives for quantum information technologies, and for the exploration of quantum-classical boundary. Here we present the experimental realization of a monolithic solid-state hybrid system governed by material strain: a quantum dot is embedded within a nanowire featuring discrete mechanical resonances corresponding to flexural vibration modes. Mechanical vibrations result in a time-varying strain field that modulates the quantum dot transition energy. This approach simultaneously offers a large light extraction efficiency and a large exciton-phonon coupling strength $g_0$. By means of optical and mechanical spectroscopy, we find that $g_0/2π$ is nearly as large as the mechanical frequency, a criterion which defines the ultra-strong coupling regime. △ Less

Submitted 18 June, 2013; originally announced June 2013.

Comments: 6 pages, 3 figures

Journal ref: Nature nanotechnology 9, 106 (2014)

The photonic trumpet: An efficient, broadband interface between a solid-state quantum emitter and a Gaussian beam

Authors: Mathieu Munsch, Nitin S. Malik, Niels Gregersen, Joël Bleuse, Emmanuel Dupuy, Adrien Delga, Jesper Mørk, Jean-Michel Gérard, Julien Claudon

Abstract: We introduce the photonic trumpet, a dielectric structure which ensures a nearly perfect coupling between an embedded quantum light source and a Gaussian free-space beam. A photonic trumpet exploits both the broadband spontaneous emission control provided by a single-mode photonic wire and the adiabatic expansion of this mode within a conical taper. Numerical simulations highlight the outstanding… ▽ More We introduce the photonic trumpet, a dielectric structure which ensures a nearly perfect coupling between an embedded quantum light source and a Gaussian free-space beam. A photonic trumpet exploits both the broadband spontaneous emission control provided by a single-mode photonic wire and the adiabatic expansion of this mode within a conical taper. Numerical simulations highlight the outstanding performance and robustness of this concept. As a first application in the field of quantum optics, we report the realisation of an ultra-bright single-photon source. The device, a GaAs photonic trumpet containing few InAs quantum dots, demonstrates a first-lens external efficiency of $0.75 \pm 0.1$. △ Less

Submitted 24 September, 2012; originally announced September 2012.

Journal ref: Physical Review Letters 110, 177402 (2013)

Surface effects in a semiconductor photonic nanowire and spectral stability of an embedded single quantum dot

Authors: Inah Yeo, Nitin S. Malik, Mathieu Munsch, Emmanuel Dupuy, Joël Bleuse, Yann-Michel Niquet, Jean-Michel Gérard, Julien Claudon, Édouard Wagner, Signe Seidelin, Alexia Auffèves, Jean-Philippe Poizat, Gilles Nogues

Abstract: We evidence the influence of surface effects for InAs quantum dots embedded into GaAs photonic nanowires used as efficient single photon sources. We observe a continuous temporal drift of the emission energy that is an obstacle to resonant quantum optics experiments at the single photon level. We attribute the drift to the sticking of oxygen molecules onto the wire, which modifies the surface char… ▽ More We evidence the influence of surface effects for InAs quantum dots embedded into GaAs photonic nanowires used as efficient single photon sources. We observe a continuous temporal drift of the emission energy that is an obstacle to resonant quantum optics experiments at the single photon level. We attribute the drift to the sticking of oxygen molecules onto the wire, which modifies the surface charge and hence the electric field seen by the quantum dot. The influence of temperature and excitation laser power on this phenomenon is studied. Most importantly, we demonstrate a proper treatment of the nanowire surface to suppress the drift. △ Less

Submitted 16 December, 2011; originally announced December 2011.

Journal ref: Applied Physics Letters 99 (2011) 233106

Observation of spin glass state in weakly ferromagnetic Sr$_2$FeCoO$_6$ double perovskite

Authors: R. Pradheesh, Harikrishnan S. Nair, C. M. N. Kumar, Jagat Lamsal, R. Nirmala, P. N. Santhosh, W. B. Yelon, S. K. Malik, V. Sankaranarayanan, K. Sethupathi

Abstract: We report the observation of spin glass state in the double perovskite oxide Sr$_{2}$FeCoO$_{6}$ prepared through sol-gel technique. Initial structural studies using x rays reveal that the compound crystallizes in tetragonal $I 4/m$ structure with lattice parameters, $a$ = 5.4609(2) Åand $c$ = 7.7113(7) Å. The temperature dependent powder x ray studies reveal no structural phase transition in the… ▽ More We report the observation of spin glass state in the double perovskite oxide Sr$_{2}$FeCoO$_{6}$ prepared through sol-gel technique. Initial structural studies using x rays reveal that the compound crystallizes in tetragonal $I 4/m$ structure with lattice parameters, $a$ = 5.4609(2) Åand $c$ = 7.7113(7) Å. The temperature dependent powder x ray studies reveal no structural phase transition in the temperature range 10 -- 300 K. However, the unit cell volume shows an anomaly coinciding with the magnetic transition temperature thereby suggesting a close connection between lattice and magnetism. Neutron diffraction studies and subsequent bond valence sums analysis show that in Sr$_{2}$FeCoO$_{6}$, the $B$ site is randomly occupied by Fe and Co in the mixed valence states of Fe$^{3+}$/Fe$^{4+}$ and Co$^{3+}$/Co$^{4+}$. The random occupancy and mixed valence sets the stage for inhomogeneous magnetic exchange interactions and in turn, for the spin glass like state in this double perovskite which is observed as an irreversibility in temperature dependent dc magnetization at $T_f\sim$ 75 K. Thermal hysteresis observed in the magnetization profile of Sr$_{2}$FeCoO$_{6}$ is indicative of the mixed magnetic phases present. The dynamic magnetic susceptibility displays characteristic frequency dependence and confirms the spin glass nature of this material. Dynamical scaling analysis of $χ'(T)$ yields a critical temperature $T_{ct}$ = 75.14(8) K and an exponent $zν$ = 6.2(2) typical for spin glasses. The signature of presence of mixed magnetic interactions is obtained from the thermal hysteresis in magnetization of Sr$_{2}$FeCoO$_{6}$. Combining the neutron and magnetization results of Sr$_2$FeCoO$_6$, we deduce the spin states of Fe to be in low spin while that of Co to be in low spin and intermediate spin. △ Less

Submitted 22 November, 2011; originally announced November 2011.

Comments: 23 pages, 6 figures, accepted in J. Appl. Phys

Surface roughness effect on ultracold neutron interaction with a wall and implications for computer simulations

Authors: A. Steyerl, S. S. Malik, A. M. Desai, C. Kaufman

Abstract: We review the diffuse scattering and the loss coefficient in ultracold neutron reflection from slightly rough surfaces, report a surprising reduction in loss coefficient due to roughness, and discuss the possibility of transition from quantum treatment to ray optics. The results are used in a computer simulation of neutron storage in a recent neutron lifetime experiment that re-ported a large di… ▽ More We review the diffuse scattering and the loss coefficient in ultracold neutron reflection from slightly rough surfaces, report a surprising reduction in loss coefficient due to roughness, and discuss the possibility of transition from quantum treatment to ray optics. The results are used in a computer simulation of neutron storage in a recent neutron lifetime experiment that re-ported a large discrepancy of neutron lifetime with the current particle data value. Our partial re-analysis suggests the possibility of systematic effects that were not included in this publication. △ Less

Submitted 30 January, 2010; v1 submitted 20 November, 2009; originally announced November 2009.

Comments: 39 pages, 9 figures; additional calculations included

Journal ref: Phys.Rev.C81:055505,2010; Erratum-ibid.C82:059905,2010

Magnetic phases evolution in the LaMn1-xFexO3+y system

Authors: O. F. de Lima, J. A. H. Coaquira, R. L. de Almeida, L. B. de Carvalho, S. K. Malik

Abstract: We have investigated the crystal structure and magnetic properties for polycrystalline samples of LaMn1-xFexO3+y, in the whole range x=0.0 to x=1.0, prepared by solid state reaction in air. All samples show the ORT-2 orthorhombic structure that suppresses the Jahn-Teller distortion, thus favoring a ferromagnetic (FM) superexchange (SE) interaction between Mn^{3+}-O-Mn^{3+}. For x=0.0 the oxygen… ▽ More We have investigated the crystal structure and magnetic properties for polycrystalline samples of LaMn1-xFexO3+y, in the whole range x=0.0 to x=1.0, prepared by solid state reaction in air. All samples show the ORT-2 orthorhombic structure that suppresses the Jahn-Teller distortion, thus favoring a ferromagnetic (FM) superexchange (SE) interaction between Mn^{3+}-O-Mn^{3+}. For x=0.0 the oxygen excess (y ~ 0.09) produces vacancies in the La and Mn sites and generates a fraction around 18% of Mn^{4+} ions and 82% of the usual Mn^{3+} ions, with possible double exchange interaction between them. The Fe doping in this system is known to produce only stable Fe^{3+} ions. We find an evolution from a fairly strong FM phase with a Curie temperature T_{C} ~ 160 K, for x=0.0, to an antiferromagnetic (AFM) phase with T_{N} = 790 K, for x=1.0, accompanied by clear signatures of a cluster-glass behavior. For intermediate Fe contents a mixed-phase state occurs, with a gradual decrease (increase) of the FM (AFM) phase, accompanied by a systematic transition broadening for 0.2 < x < 0.7. A model based on the expected exchange interaction among the various magnetic-ion types, accounts very well for the saturation-magnetization dependence on Fe doping. △ Less

Submitted 26 April, 2008; originally announced April 2008.

Comments: 27 pages, 9 figures

Anomalous magnetic and transport properties of La(0.8-x)Eu(x)Sr0.2MnO3 (0.04 l.e. x l.e. 0.36) compounds

Authors: Rakesh Kumar, C. V. Tomy, P. L. Paulose, R. Nagarajan, S. K. Malik

Abstract: Anomalous magnetic and transport properties observed in the La0.8-xEuxSr0.2MnO3 (0.04 l.e x l.e. 0.36) compounds are presented in this paper. The Curie temperature (TC) decreases from 260 K for x = 0.04 to 188 K for x = 0.16 and surprisingly thereafter increases for higher Eu concentrations (x > 0.16) and becomes nearly constant ~230 K. Resistivity increases with Eu concentration up to x = 0.16… ▽ More Anomalous magnetic and transport properties observed in the La0.8-xEuxSr0.2MnO3 (0.04 l.e x l.e. 0.36) compounds are presented in this paper. The Curie temperature (TC) decreases from 260 K for x = 0.04 to 188 K for x = 0.16 and surprisingly thereafter increases for higher Eu concentrations (x > 0.16) and becomes nearly constant ~230 K. Resistivity increases with Eu concentration up to x = 0.16 but decreases for higher Eu concentration (x > 0.16). In the magnetoresistance data, in addition to a peak corresponding to the insulator-metal transition at (TI-M1), a second peak is also observed at a relatively lower temperature, (TI-M2). Both TI-M1 and TI-M2 follow the same trend as TC. The unique variation of TC and magnetoresistance is explained on the basis of structure and disorder correlated to microscopic electronic phase segregation. The studies with the existing studies also point to the universibility of this consideration. △ Less

Submitted 2 April, 2008; originally announced April 2008.

Comments: 9 pages, 4 figures

Magnetocaloric effect in R2Ti3Ge4 (R = Gd, Tb and Er) Compounds

Authors: R. Nirmala, Darshan C. Kundaliya, A. V. Morozkin, S. K. Malik

Abstract: Heat capacity of polycrystalline R2Ti3Ge4 (R = Gd, Tb and Er) compounds (Orthorhombic, Sm5Ge4-type, Space group Pnma) has been studied in the temperature range of 1.8 K to 300 K in various applied magnetic fields. The compounds with magnetic lanthanide elements show interesting low field magnetism intrigued by possible presence of competing antiferromagnetic and ferromagnetic interactions. The m… ▽ More Heat capacity of polycrystalline R2Ti3Ge4 (R = Gd, Tb and Er) compounds (Orthorhombic, Sm5Ge4-type, Space group Pnma) has been studied in the temperature range of 1.8 K to 300 K in various applied magnetic fields. The compounds with magnetic lanthanide elements show interesting low field magnetism intrigued by possible presence of competing antiferromagnetic and ferromagnetic interactions. The magnetocaloric effect in these compounds is estimated from the field dependent heat capacity data. The magnetic entropy change and the adiabatic temperature change in the vicinity of the magnetic transition are found to be significant. △ Less

Submitted 7 December, 2007; originally announced December 2007.

Comments: 12 pages incl 3 figures, submitted to Journal of Applied Physics

Enhancement of flux pinning and high critical current density in graphite doped MgB2 superconductor

Authors: Chandra Shekhar, Rajiv Giri, R. S. Tiwari, S. K. Malik, O. N. Srivastava

Abstract: We report the synthesis and characterization of graphite (C) doped MgB2-xCx (x = 0.0, 0.1, 0.2 and 0.3) samples. The crystal structure and microstructural characterization have been investigated by x-ray diffractometer and transmission electron microscopic (TEM) analysis. The superconducting properties especially Jc and Hc2 have been measured by employing physical property measurement system. We… ▽ More We report the synthesis and characterization of graphite (C) doped MgB2-xCx (x = 0.0, 0.1, 0.2 and 0.3) samples. The crystal structure and microstructural characterization have been investigated by x-ray diffractometer and transmission electron microscopic (TEM) analysis. The superconducting properties especially Jc and Hc2 have been measured by employing physical property measurement system. We found that the graphite doping affects the lattice parameters as well as the microstructure of MgB2 superconductor. In case of optimally doped (x=0.1) sample, the critical current density at 5K corresponds to 1.1 x 10^6 and 5.3 x 10^4 A/cm^2 for 3T and 5T fields respectively. The upper critical field has been enhanced nearly two times after doping. The flux pinning behavior has been investigated by flux pinning force density curve and it reveals that the flux pinning behaviour has improved significantly by doping. TEM micrographs show the graphite nanoparticles of size ~5-10 nm which are invariably present in MgB2 grains. These nanoparticles act as flux pinning centre and are responsible for enhancement of superconducting properties of MgB2. △ Less

Submitted 30 September, 2007; originally announced October 2007.

Comments: Accepted in "Journal of Applied Physics"

Journal ref: J. Appl. Phys. 102, 093910 (2007)

Tuning the Competing magnetic interactions in RTiGe (R = Tb, Er) Compounds and tailoring the Magnetocaloric effect

Authors: R. Nirmala, S. K. Malik

Abstract: The tetragonal layered compounds TbTiGe and ErTiGe order antiferromagnetically at 276 K and 39 K, respectively. Partial substitution of Mo for Ti in these two compounds modifies the magnetic interactions giving rise to a ferromagnetic ground state which results in an enhanced magnetocaloric effect. The magnetic entropy change in ErTi0.85Mo0.15Ge for a magnetic field change of 5 T is ~10.5 J/kg/K… ▽ More The tetragonal layered compounds TbTiGe and ErTiGe order antiferromagnetically at 276 K and 39 K, respectively. Partial substitution of Mo for Ti in these two compounds modifies the magnetic interactions giving rise to a ferromagnetic ground state which results in an enhanced magnetocaloric effect. The magnetic entropy change in ErTi0.85Mo0.15Ge for a magnetic field change of 5 T is ~10.5 J/kg/K against ~0.8 J/kg/K for ErTiGe in the vicinity of the magnetic transition. Thus, magnetocaloric properties of such layered materials may be tunable by suitable chemical substitutions. △ Less

Submitted 29 August, 2007; originally announced August 2007.

Comments: Submitted to Euro Phys Lett

Magnetization and heat capacity studies of double perovskite compounds Ba2SmRuO6 and Ba2DyRuO6

Authors: Rakesh Kumar, C. V. Tomy, R. Nagarajan, P. L. Paulose, S. K. Malik

Abstract: Here we report the magnetic and heat capacity studies of the double perovskite com-pounds Ba2SmRuO6 and Ba2DyRuO6. Antiferromagnetic transitions are inferred at 54 K and 47 K in Ba2SmRuO6 and Ba2DyRuO6, respectively in the magnetization measure-ments. Heat capacity measurements show large jumps at the corresponding temperatures and confirm the bulk magnetic ordering. Both the measurements provid… ▽ More Here we report the magnetic and heat capacity studies of the double perovskite com-pounds Ba2SmRuO6 and Ba2DyRuO6. Antiferromagnetic transitions are inferred at 54 K and 47 K in Ba2SmRuO6 and Ba2DyRuO6, respectively in the magnetization measure-ments. Heat capacity measurements show large jumps at the corresponding temperatures and confirm the bulk magnetic ordering. Both the measurements provide clear indication of the ordering of the rare earth moments also along with the Ruthenium moments. How-ever, the heat capacity results suggest that the ordering of rare earth magnetic moments is spread over a large temperature range and is affected by a large crystal field effect on Ru and rare earth ions. The anomaly observed in the magnetization measurements at 42 K (below the magnetic ordering) in Ba2SmRuO6 is discerned as a reorientation of Sm3+ moments △ Less

Submitted 7 July, 2007; originally announced July 2007.

Comments: 13pages,7fig

Magnetic, magneto-thermal and magneto-transport properties in SmMn2Si2-xGex compounds

Authors: Pramod Kumar, K. G. Suresh, A. K. Nigam, S. K. Malik

Abstract: The effect of Ge substitution for Si in SmMMn2Si2-xGex compounds has been studied. The Sm ordering temperature is found to be much larger in the compound with x=2, as compared to the compounds with x=0 and 1. The increase in the intra layer Mn-Mn distance is found to be responsible for this increase. Among these three compounds, SmMn2Ge2 is found to show re-entrant ferromagnetism at low temperat… ▽ More The effect of Ge substitution for Si in SmMMn2Si2-xGex compounds has been studied. The Sm ordering temperature is found to be much larger in the compound with x=2, as compared to the compounds with x=0 and 1. The increase in the intra layer Mn-Mn distance is found to be responsible for this increase. Among these three compounds, SmMn2Ge2 is found to show re-entrant ferromagnetism at low temperatures. The magnetic contribution to the heat capacity has been found in all the three compounds. The splitting of the ground state multiplet has been estimated by fitting the magnetic part of the heat capacity data using the Schottky formula. The isothermal magnetic entropy change is found to remain the same for x=0 and 1, but decrease in the compound with x=2, though the nature of magnetic transition changes from second order to first order, as x is increased from 0 to 2. The electrical resistivity increases with Ge concentration. The excess resistivity in the antiferromagnetic region has been calculated. △ Less

Submitted 15 May, 2007; originally announced May 2007.

Multiple magnetic transitions and magnetocaloric effect in Gd1-xSmxMn2Ge2 compounds

Authors: Pramod Kumar, Niraj K. Singh, K. G. Suresh, A. K. Nigam, S. K. Malik

Abstract: Magnetic and magnetocaloric properties of polycrystalline samples of Gd1-xSmxMn2Ge2 have been studied. All the compounds except GdMn2Ge2 show re-entrant ferromagnetic behavior. Multiple magnetic transitions observed in these compounds are explained on the basis of the temperature dependences of the exchange strengths of the rare earth and Mn sublattices. Magnetocaloric effect is found to be posi… ▽ More Magnetic and magnetocaloric properties of polycrystalline samples of Gd1-xSmxMn2Ge2 have been studied. All the compounds except GdMn2Ge2 show re-entrant ferromagnetic behavior. Multiple magnetic transitions observed in these compounds are explained on the basis of the temperature dependences of the exchange strengths of the rare earth and Mn sublattices. Magnetocaloric effect is found to be positive at the re-entrant ferromagnetic transition, whereas it is negative at the antiferro-ferromagnetic transition. In SmMn2Ge2, the magnetic entropy change associated with the re-entrant transition is found to decrease with field, which is attributed to the admixture effect of the crystal field levels. The isothermal magnetic entropy change is found to decrease with increase in Sm concentration. △ Less

Submitted 5 February, 2007; originally announced February 2007.

Comments: 8

High critical current density and improved flux pinning in bulk MgB2 synthesized by Ag addition

Authors: Chandra Shekhar, Rajiv Giri, R. S. Tiwari, S. K. Malik, O. N. Srivastava

Abstract: In the present investigation, we report a systematic study of Ag admixing in MgB2 prepared by solid-state reaction at ambient pressure. All the samples in the present investigation have been subjected to structural/ microstructural characterization employing x-rays diffraction (XRD) and transmission electron microscopic (TEM) techniques. The magnetization measurements were performed by physical… ▽ More In the present investigation, we report a systematic study of Ag admixing in MgB2 prepared by solid-state reaction at ambient pressure. All the samples in the present investigation have been subjected to structural/ microstructural characterization employing x-rays diffraction (XRD) and transmission electron microscopic (TEM) techniques. The magnetization measurements were performed by physical property measurement system (PPMS). The TEM investigations reveal the formation of MgAg nanoparticles in Ag admixed samples. These nanoparticles may enhance critical current density due to their size (~5-20 nm) compatible with coherence length of MgB2 (~5-6 nm). In order to study the flux pinning effect of Ag admixing in MgB2, the evaluation of intragrain critical current density (Jc) has been carried out through magnetic measurements on the fine powdered version of the as synthesized samples. The optimum result on intragrain Jc is obtained for 10 at.% Ag admixed sample at 5K. This corresponds to 9.23x10^7 A/cm^2 in self-field,5.82x10^7 A/cm^2 at 1T,4.24 x10^6 A/cm^2 at 3.6T and 1.52x10^5 A/cm^2 at 5T. However, intragrain Jc values for MgB2 sample without Ag admixing are 2.59x10^6 A/cm^2,1.09x10^6A/cm^2,4.53x10^4 A/cm^2 and 2.91x10^3A/cm^2 at 5 K in self field, 1T, 3.6T and 5T respectively.. The high value of intragrain Jc for Ag admixed MgB2 superconductor has been attributed to the inclusion of MgAg nanoparticles into the crystal matrix of MgB2, which are capable of providing effective flux pinning centres. A feasible correlation between microstructural features and superconducting properties has been put forward. △ Less

Submitted 8 January, 2007; originally announced January 2007.

Comments: 5pages,6figures

Journal ref: J. Appl. Phys. 101, 043906 (2007)

Heat capacity and magnetocaloric effect in polycrystalline Gd1-xSmxMn2Si2

Authors: Pramod Kumar, Niraj K. Singh, K. G. Suresh, A. K. Nigam, S. K. Malik

Abstract: We report the magnetocaloric effect in terms of isothermal magnetic entropy change as well as adiabatic temperature change, calculated using the heat capacity data. Using the zero field heat capacity data, the magnetic contribution to the heat capacity has been estimated. The variations in the magnetocaloric behavior have been explained on the basis of the magnetic structure of these compounds.… ▽ More We report the magnetocaloric effect in terms of isothermal magnetic entropy change as well as adiabatic temperature change, calculated using the heat capacity data. Using the zero field heat capacity data, the magnetic contribution to the heat capacity has been estimated. The variations in the magnetocaloric behavior have been explained on the basis of the magnetic structure of these compounds. The refrigerant capacities have also been calculated for these compounds. △ Less

Submitted 19 October, 2006; originally announced October 2006.

Swift-heavy-ion-irradiation-induced enhancement in electrical conductivity of chemical solution deposited La0.7Ba0.3MnO3 thin films

Authors: R. N. Parmar, J. H. Markna, D. G. Kuberkar, Ravi Kumar, D. S. Rana, Vivas C. Bagve, S. K. Malik

Abstract: Epitaxial thin films of La0.7Ba0.3MnO3 manganite, deposited using Chemical Solution Deposition technique, were irradiated by 200 MeV Ag+15 ions with a maximum ion dose up to 1x10^12 ions/cm2. Temperature- and magnetic field-dependent resistivity measurements on all the films (before and after irradiation) reveal a sustained decrease in resistivity with increasing ion dose. A maximum dose of 1x10… ▽ More Epitaxial thin films of La0.7Ba0.3MnO3 manganite, deposited using Chemical Solution Deposition technique, were irradiated by 200 MeV Ag+15 ions with a maximum ion dose up to 1x10^12 ions/cm2. Temperature- and magnetic field-dependent resistivity measurements on all the films (before and after irradiation) reveal a sustained decrease in resistivity with increasing ion dose. A maximum dose of 1x10^12 ions/cm2 suppresses resistivity by factors of 3 and 10, at 330 K [insulator-metal (I-M) transition] and at 10 K, respectively. On the other hand, with increasing ion dose, the magnetoresistance (MR) enhances in the vicinity of I-M transition but decreases at low temperatures. These results, corroborated by surface morphology of films, suggest that the origin of such properties lies in the irradiation induced improved crystallinity and epitaxial orientation, enhanced connectivity between grains, and conglomeration of grains which result in better conductivity at grain boundaries. △ Less

Submitted 24 September, 2006; originally announced September 2006.

Comments: To appear in 'Applied Physics Letters'

Correlation between magnetism and magnetocaloric effect in RCo2-based Laves phase compounds

Authors: Niraj K. Singh, K. G. Suresh, A. K. Nigam, S. K. Malik, A. A. Coelho, S. Gama

Abstract: By virtue of the itinerant electron metamagnetism (IEM), the RCo2 compounds with R=Er, Ho and Dy are found to show first order magnetic transition at their ordering temperatures. The inherent instability of Co sublattice magnetism is responsible for the occurrence of IEM, which leads to interesting magnetic and related properties. The systematic studies of the variations in the magnetic and magn… ▽ More By virtue of the itinerant electron metamagnetism (IEM), the RCo2 compounds with R=Er, Ho and Dy are found to show first order magnetic transition at their ordering temperatures. The inherent instability of Co sublattice magnetism is responsible for the occurrence of IEM, which leads to interesting magnetic and related properties. The systematic studies of the variations in the magnetic and magnetocaloric properties of the RCo2-based compounds show that the magnetovolume effect plays a decisive role in determining the nature of magnetic transitions and hence the magnetocaloric effect (MCE) in these compound. It is found that the spin fluctuations arising due to the magnetovolume effect reduce the strength of IEM in these compounds, which subsequently lead to a reduction in the MCE. Most of the substitutions at the Co site are found to result in a positive magnetovolume effect, leading to an initial increase in the ordering temperature. Application of pressure, on the other hand, causes a reduction in the ordering temperature due to the negative magnetovolume effect. A comparative study of the magnetic and magnetocaloric properties of RCo2 compounds under various substitutions and applied pressure is presented. Analysis of the magnetization data using the Landau theory has shown that there is a strong correlation between the Landau coefficient (B) and the MCE. The variations seen in the order of magnetic transition and the MCE values seem to support the recent model proposed by Khmelevskyi and Mohn for the occurrence of IEM in RCo2 compounds. △ Less

Submitted 16 September, 2006; originally announced September 2006.

Role of Fe substitution on the anomalous magnetocaloric and magnetoresistance behavior in Tb(Ni1-xFex)2 compounds

Authors: Niraj K. Singh, K. G. Suresh, D. S. Rana, A. K. Nigam, S. K. Malik

Abstract: We report the magnetic, magnetocaloric and magnetoresistance results obtained in Tb(Ni1-xFex)2 compounds with x=0, 0.025 and 0.05. Fe substitution leads to an increase in the ordering temperature from 36 K for x=0 to 124 K for x=0.05. Contrary to a single sharp MCE peak seen in TbNi2, the MCE peaks of the Fe substituted compounds are quite broad. We attribute the anomalous MCE behavior to the ra… ▽ More We report the magnetic, magnetocaloric and magnetoresistance results obtained in Tb(Ni1-xFex)2 compounds with x=0, 0.025 and 0.05. Fe substitution leads to an increase in the ordering temperature from 36 K for x=0 to 124 K for x=0.05. Contrary to a single sharp MCE peak seen in TbNi2, the MCE peaks of the Fe substituted compounds are quite broad. We attribute the anomalous MCE behavior to the randomization of the Tb moments brought about by the Fe substitution. Magnetic and magnetoresistance results seem to corroborate this proposition. The present study also shows that the anomalous magnetocaloric and magnetoresistance behavior seen in the present compounds is similar to that of Ho(Ni,Fe)2 compounds. △ Less

Submitted 16 September, 2006; originally announced September 2006.

Effect of Ge substitution for Si on the anomalous magnetocaloric and magnetoresistance properties of GdMn2Si2 compounds

Authors: Pramod Kumar, Niraj K. Singh, K. G. Suresh, A. K. Nigam, S. K. Malik

Abstract: The effect of Ge substitution on the magnetization, heat capacity, magnetocaloric effect and magnetoresistance of GdMn2Si2-xGex (x=0, 1, and 2) compounds has been studied. The magnetic transition associated with the Gd ordering is found to change from second order to first order on Ge substitution. Magnetic contributions to the total heat capacity and the entropy have been estimated. Magnetocalo… ▽ More The effect of Ge substitution on the magnetization, heat capacity, magnetocaloric effect and magnetoresistance of GdMn2Si2-xGex (x=0, 1, and 2) compounds has been studied. The magnetic transition associated with the Gd ordering is found to change from second order to first order on Ge substitution. Magnetic contributions to the total heat capacity and the entropy have been estimated. Magnetocaloric effect has been calculated in terms of adiabatic temperature change (deltaTad) as well as isothermal magnetic entropy change (deltaSM) using the heat capacity data. The temperature dependence of the magnetocaloric effect in all the three compounds have shown broad peaks. The maximum values of deltaSM and deltaTad for GdMn2Ge2 are found to be 5.9 J/kgK and 1.2 K, respectively. The magnetoresistance is found to be very large and positive with a maximum value of about 22% in the case of GdMn2Ge2. In the other two compounds also, the magnetoresistance is predominantly positive, except in the vicinity of the Gd ordering temperature. The anomalous nature of the magnetocaloric effect and the magnetoresistance has been attributed to the canted magnetic structure of these compounds. △ Less

Submitted 15 September, 2006; originally announced September 2006.

Large magnetoresistance in intermetallic compounds R2Mn3Si5 (R = Tb, Dy and Ho)

Authors: R. Nirmala, S. K. Malik, A. V. Morozkin, Y. Yamamoto, H. Hori

Abstract: Magnetization (M) and magnetoresistance (MR) measurements on polycrystalline R2Mn3Si5 (R = Tb, Dy and Ho) compounds (tetragonal, space group P4/mnc) have been carried out in the temperature range of 2 K-300 K, in various applied fields. Both, the rare earth and the Mn, are found to carry magnetic moments in these compounds. Mn has two sub-lattices (Mn1 and Mn2) that order magnetically at two dif… ▽ More Magnetization (M) and magnetoresistance (MR) measurements on polycrystalline R2Mn3Si5 (R = Tb, Dy and Ho) compounds (tetragonal, space group P4/mnc) have been carried out in the temperature range of 2 K-300 K, in various applied fields. Both, the rare earth and the Mn, are found to carry magnetic moments in these compounds. Mn has two sub-lattices (Mn1 and Mn2) that order magnetically at two different temperatures. Rare earth and Mn1 moments order ferromagnetically at TC1 whereas Mn2 is found to magnetically order at TC2 (TC1 = 89 K, 86 K, 78 K and TC2 = 18 K, 34 K, 16 K for R = Tb, Dy and Ho compounds, respectively). Magnetoresistance measurements reveal large negative MR values of about 50 % near TC2 at 9 T in all these compounds. This giant magnetoresistance is attributed to the spin-dependent scattering effects, competing exchange interactions and the layered structure of these compounds △ Less

Submitted 14 September, 2006; originally announced September 2006.

Comments: Submitted to Europhys. Lett

Direct Correlation between 1/f-magneto-noise and magnetoresistance in La0.7Sr0.3MnO3 and (La0.5Pr0.2)Ba0.3MnO3 manganites

Authors: D. S. Rana, M. Ziese, S. K. Malik

Abstract: Temperature- and magnetic field-dependent electrical noise and electrical resistivity measurements were carried out on epitaxial thin films of a large bandwidth La0.7Sr0.3MnO3 and a disordered intermediate bandwidth (La0.5Pr0.2)Ba0.3MnO3 manganite system. The power spectraldensity was dominated by 1/f-noise. This 1/f-noise was observed to follow the overall temperature dependence of the resistiv… ▽ More Temperature- and magnetic field-dependent electrical noise and electrical resistivity measurements were carried out on epitaxial thin films of a large bandwidth La0.7Sr0.3MnO3 and a disordered intermediate bandwidth (La0.5Pr0.2)Ba0.3MnO3 manganite system. The power spectraldensity was dominated by 1/f-noise. This 1/f-noise was observed to follow the overall temperature dependence of the resistivity. Moreover, in these compounds the magneto-noise effect was found to be of nearly the same magnitude as the magnetoresistance. This direct correlation between magneto-noise and magnetoresistance suggests that the enhanced 1/f-noise has its origin in intrinsic charge-carrier density fluctuations. △ Less

Submitted 18 August, 2006; originally announced August 2006.

Comments: To appear in 'Physical Review B'

Magnetic avalanche-like behavior in disordered manganite (Eu0.4La0.1)(Sr0.4Ca0.1)MnO3

Authors: D. S. Rana, S. K. Malik

Abstract: The half-doped manganite, (Eu0.4La0.1)(Sr0.4Ca0.1)MnO3, has been found to exhibit sharp step-like metamagnetic transitions below 5 K. The number of magnetic steps increases with decreasing temperature and this number suddenly rises from 3 at 2 K to ~50 at 1.7 K. The self-similar character of the multiple magnetic steps at reduced temperature identifies these steps as avalanche-like transitions.… ▽ More The half-doped manganite, (Eu0.4La0.1)(Sr0.4Ca0.1)MnO3, has been found to exhibit sharp step-like metamagnetic transitions below 5 K. The number of magnetic steps increases with decreasing temperature and this number suddenly rises from 3 at 2 K to ~50 at 1.7 K. The self-similar character of the multiple magnetic steps at reduced temperature identifies these steps as avalanche-like transitions. The occurrence of a multitude of magnetic steps at low temperatures, the decreasing effect of magnetic field sweep rate on the step-like metamagnetism, and the decreasing irreversibility of transition in the specific heat suggest that reduced spin-lattice coupling facilitates the transformation of antiferromagnetic to ferromagnetic state via an avalanche-like behavior. △ Less

Submitted 4 August, 2006; originally announced August 2006.

Comments: 13 pages, 5 Figures

Magnetic Properties of Ternary Gallides of type RNi4Ga (R = Rare earths)

Authors: Devang A. Joshi, C. V. Tomy D. S. Rana, R. Nagarajan, S. K. Malik

Abstract: The magnetic properties of RNi4Ga (R = La, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm and Lu) compounds have been investigated. These compounds form in a hexagonal CaCu5 type structure with a space group P6/mmm. Compounds with the magnetic rare earths, R = Nd, Sm, Gd, Tb, Dy, Ho, Er and Tm, undergo a ferromagnetic transition at 5 K, 17 K, 20 K, 19 K, 12 K, 3.5 K, 8 K and 6.5 K, respectively. The transit… ▽ More The magnetic properties of RNi4Ga (R = La, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm and Lu) compounds have been investigated. These compounds form in a hexagonal CaCu5 type structure with a space group P6/mmm. Compounds with the magnetic rare earths, R = Nd, Sm, Gd, Tb, Dy, Ho, Er and Tm, undergo a ferromagnetic transition at 5 K, 17 K, 20 K, 19 K, 12 K, 3.5 K, 8 K and 6.5 K, respectively. The transition temperatures are smaller compared to their respective parent compounds RNi5. PrNi4Ga is paramagnetic down to 2 K. LaNi4Ga and LuNi4Ga are Pauli paramagnets. All the compounds show thermomagnetic irreversibility in the magnetically ordered state except GdNi4Ga. △ Less

Submitted 14 November, 2005; originally announced November 2005.

Comments: 14 Pages 6 Figures 1 Table

Magnetic and transport properties of Mo substituted La0.67Ba0.33Mn1-xMoxO3 perovskite system

Authors: Darshan C. Kundaliya, Reeta Vij, R. G. Kulkarni, B. Varughese, A. K. Nigam, S. K. Malik

Abstract: The effect of doping Mo for Mn on the magnetic and transport properties of the colossal magnetoresistance material, La0.67Ba0.33MnO3, has been studied. Compounds of the series La0.67Ba0.33Mn1-xMoxO3 (x=0.0 to 0.1) have been prepared and found to crystallize in the orthorhombic structure (space group Pbnm). Energy Dispersive X-ray Analysis (EDAX) measurements confirm the stoichiometry of all the… ▽ More The effect of doping Mo for Mn on the magnetic and transport properties of the colossal magnetoresistance material, La0.67Ba0.33MnO3, has been studied. Compounds of the series La0.67Ba0.33Mn1-xMoxO3 (x=0.0 to 0.1) have been prepared and found to crystallize in the orthorhombic structure (space group Pbnm). Energy Dispersive X-ray Analysis (EDAX) measurements confirm the stoichiometry of all the samples. Magnetotransport and magnetization measurements reveal that the metal-insulator transition temperature (Tp) decreases from 330K for x=0 to 255K for x=0.1. The change in Tp on Mo substitution is relatively much smaller than the corresponding change observed on substitution by other transition elements, such as Ti, Fe, Co, Ni, etc. Further, the ferromagnetic transition temperature (TC) is nearly unchanged by Mo substitution. This is in striking contrast to the large decrease in TC observed with substitution of above-mentioned 3d elements. These unusual magnetic and transport properties of La0.67Ba0.33Mn1-xMoxO3 may be either due to the formation of magnetic pair between Mn and Mo or due to strong Mo(4d)-O(2p) overlap, which in turn, may affect the Mn-Mn interaction via the oxygen atoms △ Less

Submitted 5 August, 2005; originally announced August 2005.

Comments: 25 pages, 5 figures

Journal ref: J. Appl. Phys. 98, 013905 (2005)

Effect of La Doping on Microstructure and Critical Current Density of MgB2

Authors: Chandra Shekhar, Rajiv Giri, R S Tiwari, D S Rana, S K Malik, O N Srivastava

Abstract: In the present study, La-doped MgB_2 superconductors with different doping level (Mg1-xLaxB2; x=0.00, 0.01, 0.03 & 0.05) have been synthesized by solid-state reaction route at ambient pressure. Effect of La doping have been investigated in relation to microstructural characteristics and superconducting properties, particularly intragrain critical current density (Jc). The microstructural charact… ▽ More In the present study, La-doped MgB_2 superconductors with different doping level (Mg1-xLaxB2; x=0.00, 0.01, 0.03 & 0.05) have been synthesized by solid-state reaction route at ambient pressure. Effect of La doping have been investigated in relation to microstructural characteristics and superconducting properties, particularly intragrain critical current density (Jc). The microstructural characteristics of the as synthesized Mg(La)B2 compounds were studied employing transmission electron microscopic (TEM) technique. The TEM investigations reveal inclusion of LaB6 nanoparticles within the MgB2 grains which provide effective flux pinning centres. The evaluation of intragrain Jc through magnetic measurements on the fine powdered version of the as synthesized samples reveal that Jc of the samples change significantly with the doping level. The optimum result on Jc is obtained for Mg0.97La0.03B2 at 5K, the Jc reaches ~1.4x107A/cm2 in self field, ~2.1 x 106A/cm2 at 1T, ~2.5 x 105A/cm2 at 2.5T and ~1.8 x 104 A/cm2 at 4.5T. The highest value of intragrain Jc in Mg0.97La0.03B2 superconductor has been attributed to the inclusion of LaB6 nanoparticles which are capable of providing effective flux pinning centres. △ Less

Submitted 4 July, 2005; originally announced July 2005.

Journal ref: Supercond. Sci. Technol. 18 (2005) 1210--1214

Competition between Superconductivity and Charge Density Wave Ordering in the Lu$_5$Ir$_4$(Si$_{1-x}$Ge$_x$)$_{10}$ Alloy System

Authors: Yogesh Singh, R. Nirmala, S. Ramakrishnan, S. K. Malik

Abstract: We have performed bulk measurements such as dc magnetic susceptibility, electrical resistivity and heat capacity on the pseudo-ternary alloys Lu$_5$Ir$_4$(Si$_{1-x}$Ge$_x$)$_{10}$ to study the interplay and competition between superconductivity and the charge density wave (CDW) ordering transition. We track the evolution of the superconducting transition temperature T$_{SC}$ and the CDW ordering… ▽ More We have performed bulk measurements such as dc magnetic susceptibility, electrical resistivity and heat capacity on the pseudo-ternary alloys Lu$_5$Ir$_4$(Si$_{1-x}$Ge$_x$)$_{10}$ to study the interplay and competition between superconductivity and the charge density wave (CDW) ordering transition. We track the evolution of the superconducting transition temperature T$_{SC}$ and the CDW ordering temperature T$_{CDW}$ as a function of x (concentration of Ge) ($0.0 \leq x\leq~1.0$). We find that increasing x (increasing disorder) suppresses the T$_{CDW}$ rapidly with the concomitant increase in T$_{SC}$. We present a temperature-concentration (or volume) phase diagram for this system and compare our results with earlier work on substitution at the Lu or Ir site to show how dilution at the Si site presents a different situation from these other works. The heat capacity data in the vicinity of the CDW transition has been analyzed using a model of critical fluctuations in addition to a mean-field contribution and a smooth lattice background. We find that the critical exponents change appreciably with increasing disorder. This analysis suggests that the strong-coupling and non mean-field like CDW transition in the parent compound Lu$_5$Ir$_4$Si$_{10}$ changes to a mean-field like transition with increasing Ge concentration. △ Less

Submitted 19 May, 2005; originally announced May 2005.

Comments: 14 pages and 8 figures. Accepted for publication in Phys. Rev. B

High temperature magnetic ordering in La2RuO5

Authors: S. K. Malik, Darshan C. Kundaliya, R. D. Kale

Abstract: Magnetic susceptibility, heat capacity and electrical resistivity measurements have been carried out on a new ruthenate, La2RuO5 (monoclinic, space group P21/c) which reveal that this compound is a magnetic semiconductor with a high magnetic ordering temperature of 170K. The entropy associated with the magnetic transition is 8.3 J/mole-K -close to that expected for the low spin (S=1) state of Ru… ▽ More Magnetic susceptibility, heat capacity and electrical resistivity measurements have been carried out on a new ruthenate, La2RuO5 (monoclinic, space group P21/c) which reveal that this compound is a magnetic semiconductor with a high magnetic ordering temperature of 170K. The entropy associated with the magnetic transition is 8.3 J/mole-K -close to that expected for the low spin (S=1) state of Ru4+ ions. The low temperatures specific heat coefficient g is found to be nearly zero consistent with the semiconducting nature of the compound. The magnetic ordering temperature of La2RuO5 is comparable to the highest known Curie temperature of another ruthenate, namely, metallic SrRuO3, and in both these compounds the nominal charge state of Ru is 4+. △ Less

Submitted 19 April, 2005; originally announced April 2005.

Comments: 16 pages, 6 figures, To be published in Solid State Communications

Magnetism in C60 Films Induced by Proton Irradiation

Authors: S. Mathew, B. Satpati, B. Joseph, B. N. Dev, R. Nirmala, S. K. Malik

Abstract: It is shown that polycrystalline fullerene thin films on hydrogen passivated Si(111) substrates irradiated by 2 MeV protons displays ferromagnetic-like behavior at 5 K. At 300 K both the pristine and the irradiated film show diamagnetic behavior. Magnetization data in the temperature range 2 - 300 K, in 1 Tesla applied field, for the irradiated film shows much stronger temperature dependence com… ▽ More It is shown that polycrystalline fullerene thin films on hydrogen passivated Si(111) substrates irradiated by 2 MeV protons displays ferromagnetic-like behavior at 5 K. At 300 K both the pristine and the irradiated film show diamagnetic behavior. Magnetization data in the temperature range 2 - 300 K, in 1 Tesla applied field, for the irradiated film shows much stronger temperature dependence compared to the pristine film. Possible origin of ferromagnetic-like signals in the irradiated films are discussed. △ Less

Submitted 22 March, 2005; v1 submitted 13 March, 2005; originally announced March 2005.

Comments: 4 pages, 4 figures, Submitted to Phys. Rev. B (Rapid Communication)

Structure, magnetic and transport properties of Ti-substituted La0.7Sr0.3MnO3

Authors: M. S. Kim, J. B. Yang, Q. Cai, X. D. Zhou, W. J. James, W. B. Yelon, P. E. Parris, D. Buddhikot, S. K. Malik

Abstract: Ti-substituted perovskites, La0.7Sr0.3Mn1-xTixO3, with x between 0 to 0.20, were investigated by neutron diffraction, magnetization, electric resistivity, and magnetoresistance (MR) measurements. All samples show a rhombohedral structure (space group R3c) from 10 K to room temperature. At room temperature, the cell parameters a, c and the unit cell volume increase with increasing Ti content. How… ▽ More Ti-substituted perovskites, La0.7Sr0.3Mn1-xTixO3, with x between 0 to 0.20, were investigated by neutron diffraction, magnetization, electric resistivity, and magnetoresistance (MR) measurements. All samples show a rhombohedral structure (space group R3c) from 10 K to room temperature. At room temperature, the cell parameters a, c and the unit cell volume increase with increasing Ti content. However, at 10 K, the cell parameter a has a maximum value for x = 0.10, and decreases for x greater than 0.10, while the unit cell volume remains nearly constant for x greater than 0.10. The average (Mn,Ti)-O bond length increases up to x=0.15, and the (Mn,Ti)-O-(Mn,Ti) bond angle decreases with increasing Ti content to its minimum value at x=0.15 at room temperature. Below the Curie temperature T_C, the resistance exhibits metallic behavior for the x _ 0.05 samples. A metal (semiconductor) to insulator transition is observed for the x_ 0.10 samples. A peak in resistivity appears below T_C for all samples, and shifts to a lower temperature as x increases. The substitution of Mn by Ti decreases the 2p-3d hybridization between O and Mn ions, reduces the bandwidth W, and increases the electron-phonon coupling. Therefore, the TC shifts to a lower temperature and the resistivity increases with increasing Ti content. A field-induced shift of the resistivity maximum occurs at x less than or equal to 0.10. The maximum MR effect is about 70% for La0.7Sr0.3Mn0.8Ti0.2O3. The separation of TC and the resistivity maximum temperature Tmax enhances the MR effect in these compounds due to the weak coupling between the magnetic ordering and the resistivity as compared with La0.7Sr0.3MnO3. △ Less

Submitted 9 February, 2005; originally announced February 2005.

Comments: zip file

The effect of Cu-doping on the magnetic and transport properties of La0.7Sr0.3MnO3

Authors: M. S. Kim, J. B. Yang, Q. Cai, X. D. Zhou, W. J. James, W. B. Yelon, P. E. Parris, D. Buddhikot, S. K. Malik

Abstract: The effects of Cu-doping on the structural, magnetic, and transport properties of La0.7Sr0.3Mn1-xCuxO3 (0 < x < 0.20) have been studied using neutron diffraction, magnetization and magnetoresistance (MR) measurements. All samples show the rhombohedral structure with the R3c space-group from 10K to room temperature (RT). Neutron diffraction data suggest that some of the Cu ions have a Cu3+ state… ▽ More The effects of Cu-doping on the structural, magnetic, and transport properties of La0.7Sr0.3Mn1-xCuxO3 (0 < x < 0.20) have been studied using neutron diffraction, magnetization and magnetoresistance (MR) measurements. All samples show the rhombohedral structure with the R3c space-group from 10K to room temperature (RT). Neutron diffraction data suggest that some of the Cu ions have a Cu3+ state in these compounds. The substitution of Mn by Cu affects the Mn-O bond length and Mn-O-Mn bond angle resulting from the minimization of the distortion of the MnO6 octahedron. Resistivity measurements show that a metal to insulator transition occurs for the x more than 0.15 samples. The x = 0.15 sample shows the highest MR(_80%), which might result from the co-existence of Cu3+/Cu2+ and the dilution effect of Cu-doping on the double exchange interaction. △ Less

Submitted 9 February, 2005; originally announced February 2005.

Comments: a zip file

Magnetocaloric effect in the intermetallic compound DyNi

Authors: S. K. Tripathy, K. G. Suresh, R. Nirmala, A. K. Nigam, S. K. Malik

Abstract: Magnetic and heat capacity measurements have been carried out on the polycrystalline sample of DyNi which crystallizes in the orthorhombic FeB structure (space group Pnma). This compound is ferromagnetic with a Curie temperature of 59 K. Magnetization-field isotherms at low temperatures shows a step-like behavior characteristic of metamagnetic transitions. The magnetocaloric effect has been meas… ▽ More Magnetic and heat capacity measurements have been carried out on the polycrystalline sample of DyNi which crystallizes in the orthorhombic FeB structure (space group Pnma). This compound is ferromagnetic with a Curie temperature of 59 K. Magnetization-field isotherms at low temperatures shows a step-like behavior characteristic of metamagnetic transitions. The magnetocaloric effect has been measured both in terms of isothermal magnetic entropy change and adiabatic temperature change for various applied magnetic fields. The maximum values of the entropy change and the temperature change are found to be 19 Jkg-1K-1 and 4.5 K, respectively, for a field of 60 kOe. The large magnetocaloric effect is attributed to the field-induced spin-flop metamagnetism occurring in this compound, which has a noncollinear magnetic structure at low fields. △ Less

Submitted 8 February, 2005; originally announced February 2005.

Comments: 11 pages

Phase transitions in Lu$_2$Ir$_3$Si$_5$

Authors: Yogesh Singh, Dilip Pal, S. Ramakrishnan, A. M. Awasthi, S. K. Malik

Abstract: We report the results of our investigations on a polycrystalline sample of Lu$_2$Ir$_3$Si$_5$ which crystallizes in the U$_2$Co$_3$Si$_5$ type structure (Ibam). These investigations comprise powder X-ray diffraction, magnetic susceptibility, electrical resistivity and high temperature (120-300 K) heat capacity studies. Our results reveal that the sample undergoes a superconducting transition below… ▽ More We report the results of our investigations on a polycrystalline sample of Lu$_2$Ir$_3$Si$_5$ which crystallizes in the U$_2$Co$_3$Si$_5$ type structure (Ibam). These investigations comprise powder X-ray diffraction, magnetic susceptibility, electrical resistivity and high temperature (120-300 K) heat capacity studies. Our results reveal that the sample undergoes a superconducting transition below 3.5 K. It also undergoes a first order phase transition between 150-250 K as revealed by an upturn in the resistivity, a diasmagnetic drop in the magnetic susceptibility and a large anomaly (20-30 J/mol K) in the specific heat data. We observe a huge thermal hysteresis of almost 45 K between the cooling and warming data across this high temperature transition in all our measurements. Low temperature X-ray diffraction measurements at 87 K reveals that the compound undergoes a structural change at the high temperature transition. Resistivity data taken in repeated cooling and warming cycles indicate that at the high temperature transition, the system goes into a highly metastable state and successive heating/cooling curves are found to lie above the previous one and the resistance keeps increasing with every thermal cycle. The room temperature resistance of a thermaly cycled piece of the sample decays exponentialy with time with a decay time constant estimated to be about 10$^4$ secs. The anomaly (upturn) in the resistivity and the large drop (almost 45%) in the susceptibility across the high temperature transition suggest that the observed structural change is accompanied or induced by an electronic transition. △ Less

Submitted 25 July, 2017; v1 submitted 2 February, 2005; originally announced February 2005.

Comments: 7 figures, 1 table and 18 references

Journal ref: Phys. Rev. B 71, 045109 (2005)

Magnetic and Transport Properties of Ternary Indides of type R2CoIn8 (R = Ce, Pr and Dy)

Authors: Devang A. Joshi, C. V. Tomy, P. L. Paulose, R. Nagarajan, R. Nirmala, S. K. Malik

Abstract: We have synthesized and investigated the magnetic and transport properties of a series of compounds, R2CoIn8 (R = rare earth). Compounds form in single phase with a tetragonal structure (space group P4/mmm, no. 162). The Ce compound shows heavy fermion behavior. The magnetic susceptibility of Pr2CoIn8 shows a marked deviation from the Curie-Weiss behavior at low temperatures, which is attributed… ▽ More We have synthesized and investigated the magnetic and transport properties of a series of compounds, R2CoIn8 (R = rare earth). Compounds form in single phase with a tetragonal structure (space group P4/mmm, no. 162). The Ce compound shows heavy fermion behavior. The magnetic susceptibility of Pr2CoIn8 shows a marked deviation from the Curie-Weiss behavior at low temperatures, which is attributed to the crystalline electric field effects. Heat capacity and magnetization measurements show that Dy2CoIn8 undergoes a magnetic transition at 17 K and a second transition near 5 K, the latter of which may be due to spin reorientation. Magnetization of this compound shows two metamagnetic transitions approximately at 3.6 T and 8.3 T. △ Less

Submitted 24 January, 2005; originally announced January 2005.

Comments: Total 7 pages of text and figures

Heat capacity and magnetoresistance in Dy(Co,Si)2 compounds

Authors: Niraj K. Singh, K. G. Suresh, A. K. Nigam, S. K. Malik

Abstract: Magnetocaloric effect and magnetoresistance have been studied in Dy(Co1-xSix)2 [x=0, 0.075 and 0.15] compounds. Magnetocaloric effect has been calculated in terms of adiabatic temperatue change (Delta Tad) as well as isothermal magnetic entropy change (Delta SM) using the heat capacity data. The maximum values of DeltaSM and DeltaTad for DyCo2 are found to be 11.4 JKg-1K-1 and 5.4 K, respectivel… ▽ More Magnetocaloric effect and magnetoresistance have been studied in Dy(Co1-xSix)2 [x=0, 0.075 and 0.15] compounds. Magnetocaloric effect has been calculated in terms of adiabatic temperatue change (Delta Tad) as well as isothermal magnetic entropy change (Delta SM) using the heat capacity data. The maximum values of DeltaSM and DeltaTad for DyCo2 are found to be 11.4 JKg-1K-1 and 5.4 K, respectively. Both DSM and DTad decrease with Si concentration, reaching a value of 5.4 JKg-1K-1 and 3 K, respectively for x=0.15. The maximum magnetoresistance is found to about 32% in DyCo2, which decreases with increase in Si. These variations are explained on the basis of itinerant electron metamagnetism occurring in these compounds. △ Less

Submitted 24 January, 2005; originally announced January 2005.

Comments: Total 8 pages of text and figures