-
Stable Perovskite Solar Cells via exfoliated graphite as an ion diffusion-blocking layer
Authors:
Abdullah S. Alharbi,
Miqad S. Albishi,
Temur Maksudov,
Tariq F. Alhuwaymel,
Chrysa Aivalioti,
Kadi S. AlShebl,
Naif R. Alshamrani,
Furkan H. Isikgor,
Mubarak Aldosari,
Majed M. Aljomah,
Konstantinos Petridis,
Thomas D. Anthopoulos,
George Kakavelakis,
Essa A. Alharbi
Abstract:
Ion and metal diffusion in metal halide perovskites, charge-transporting layers, and electrodes are detrimental to the performance and stability of perovskite-based photovoltaic devices. As a result, there is an intense research interest in developing novel defect and ion diffusion mitigation strategies. We present a simple, low-cost, scalable, and highly effective method that uses spray-coated ex…
▽ More
Ion and metal diffusion in metal halide perovskites, charge-transporting layers, and electrodes are detrimental to the performance and stability of perovskite-based photovoltaic devices. As a result, there is an intense research interest in developing novel defect and ion diffusion mitigation strategies. We present a simple, low-cost, scalable, and highly effective method that uses spray-coated exfoliated graphite interlayers to block ion and metal diffusion and humidity ingress within the perovskite, the hole transport material, and metal electrodes. The influence of inserting the exfoliated graphite films on the structural, surface morphology, and optoelectronic properties were examined through various methods, including X-ray diffraction, Time-of-Flight Secondary Ion Mass Spectrometry, Scanning electron microscope, atomic force microscopy, Current-voltage (J-V) characteristics, Transient photocurrent, and transient photovoltage. Our comprehensive investigation found that exfoliated graphite films reduced the I- and Li+ diffusion among the layers, leading to defect mitigation, reducing non-radiative recombination, and enhancing the device stability. Consequently, the best-performing device demonstrated a power conversion efficiency of 25% and a fill factor exceeding 80%. Additionally, these devices were subjected to different lifetime tests, which significantly enhanced the operational stability.
△ Less
Submitted 31 July, 2024;
originally announced July 2024.
-
A critical perspective for emerging ultra-thin solar cells with ultra-high power-per-weight outputs
Authors:
Apostolos Panagiotopoulos,
Temur Maksudov,
George Kakavelakis,
George Perrakis,
Essa A. Alharbi,
Dimitar Kutsarov,
Furkan H. Isikgor,
Salman Alfihed,
Konstantinos Petridis,
Maria Kafesaki,
S. Ravi P. Silva,
Thomas D. Anthopoulos,
Michael Graetzel
Abstract:
Ultrathin, solution-processed emerging solar cells with high power-per-weight (PPW) outputs demonstrate unique potential for applications where low weight, high power output, and flexibility are indispensable. The following perspective explores the literature of emerging PVs and highlights the maximum reported PPW values of Perovskite Solar Cells (PSCs) 29.4 W/g, Organic Solar Cells (OSCs) 32.07 W…
▽ More
Ultrathin, solution-processed emerging solar cells with high power-per-weight (PPW) outputs demonstrate unique potential for applications where low weight, high power output, and flexibility are indispensable. The following perspective explores the literature of emerging PVs and highlights the maximum reported PPW values of Perovskite Solar Cells (PSCs) 29.4 W/g, Organic Solar Cells (OSCs) 32.07 W/g and Quantum Dot Solar Cells (QDSC) 15.02 W/g, respectively. The record PPW values of OSCs and PSCs are approximately one order of magnitude higher compared to their inorganic ultrathin solar cells counterparts (approx. 3.2 W/g for CIGS and a-Si). This consists emerging PVs, very attractive for a variety of applications where the PPW is the key parameter. In particular, both OSCs and PSCs can be implemented in different scenarios of applications (indoor and biocompatible applications for OSCs and outdoor and high-energy radiation conversion conditions for the PSCs) due to their unique optoelectronic and physiochemical properties. Finally, our theoretical optical and electrical simulation and optimization study for the most promising and well-suited PV technologies, showed an impressive maximum realistic theoretical PPW limit of 74.3 and 93.7 W/g for PSCs and OSCs, respectively. Our finding shows that the literature PSCs and OSCs towards high PPW outputs, is not quite close to the theoretical maximum and thus more work needs to be done to further increase the PPW output of these promising PV technologies.
△ Less
Submitted 25 July, 2023;
originally announced July 2023.
-
In-Situ Monitoring of the Charge Carrier Dynamics of CH$_3$NH$_3$PbI$_3$ Perovskite Crystallization Process
Authors:
Efthymis Serpetzoglou,
Ioannis Konidakis,
Temur Maksudov,
Apostolos Panagiotopoulos,
Emmanuel Kymakis,
Emmanuel Stratakis
Abstract:
Although methylammonium lead iodide (CH$_3$NH$_3$PbI$_3$) perovskite has attracted enormous scientific attention over the last decade or so, important information on the charge extraction dynamics and recombination processes in perovskite devices is still missing. Herein we present a novel approach to evaluate the quality of CH$_3$NH$_3$PbI$_3$ layers, via in-situ monitoring of the perovskite laye…
▽ More
Although methylammonium lead iodide (CH$_3$NH$_3$PbI$_3$) perovskite has attracted enormous scientific attention over the last decade or so, important information on the charge extraction dynamics and recombination processes in perovskite devices is still missing. Herein we present a novel approach to evaluate the quality of CH$_3$NH$_3$PbI$_3$ layers, via in-situ monitoring of the perovskite layer charge carrier dynamics during the thermal annealing crystallization process, by means of time-resolved femtosecond transient absorption spectroscopy (TAS). In particular, CH$_3$NH$_3$PbI$_3$ films were deposited on two types of polymeric hole transport layers (HTL), poly(3,4-ethylenedioxythiophene)-poly-(styrenesulfonate) (PEDOT:PSS) and poly-(triarylamine) (PTAA), that are known to provide different carrier transport characteristics in perovskite solar cells. In order to monitor the evolution of the perovskite charge carrier dynamics during the crystallization process, the so-formed CH$_3$NH$_3$PbI$_3$/HTL architectures were studied in-situ by TAS at three different annealing temperatures, i.e. 90, 100 and 110 oC. It is revealed that the annealing time period required in order to achieve the optimum perovskite film quality in terms of the decay dynamics strongly depends on the annealing temperature, as well as, on the employed HTL. For both HTLs, the required period decreases as higher annealing temperature is used, while, for the more hydrophobic PTAA polymer, longer annealing periods were required in order to obtain the optimum charge carrier dynamics. The correlation of the TAS finding with the structural and morphological features of the perovskite films is analysed and provides useful insights on the charge extraction dynamics and recombination processes in perovskite optoelectronic devices.
△ Less
Submitted 4 November, 2020;
originally announced November 2020.
-
Improved Charge Carrier Dynamics of CH$_3$NH$_3$PbI$_3$ Perovskite Films Synthesized by Means of Laser-Assisted Crystallization
Authors:
Ioannis Konidakis,
Temur Maksudov,
Efthymis Serpetzoglou,
George Kakavelakis,
Emmanuel Kymakis,
Emmanuel Stratakis
Abstract:
Although it has been recently demonstrated that the laser-assisted (LA) crystallization process leads to the formation of perovskite absorber films of superior photovoltaic performance compared to conventional thermal annealing (TA), the physical origin behind this important discovery is missing. In this study, CH$_3$NH$_3$PbI$_3$ perovskite thin films have been synthesized by means of LA and TA c…
▽ More
Although it has been recently demonstrated that the laser-assisted (LA) crystallization process leads to the formation of perovskite absorber films of superior photovoltaic performance compared to conventional thermal annealing (TA), the physical origin behind this important discovery is missing. In this study, CH$_3$NH$_3$PbI$_3$ perovskite thin films have been synthesized by means of LA and TA crystallization on the surface of two hole transport layers (HTL) namely poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) and poly(triarylamine) (PTAA). A systematic study of the effect of laser irradiation conditions on the crystalline quality and morphology of the perovskite films was performed via scanning electron microscopy, X-Ray diffraction and absorption spectroscopy. Meanwhile, time-resolved transient absorption spectroscopy under inert atmosphere conditions was used to evaluate the carrier transport dynamics. It is found that for the PEDOT:PSS/CH$_3$NH$_3$PbI$_3$, structures the LA process resulted to perovskite layers of larger grains, faster charge carrier extraction properties and slower bimolecular recombination, when compared to TA. On the contrary, the LA-assisted formation of the PTAA/CH$_3$NH$_3$PbI$_3$ heterostructures leads to extensive presence of residual PbI$_2$ and thus inferior performance and charge carrier dynamics.
△ Less
Submitted 4 November, 2020;
originally announced November 2020.
