-
Topological edge solitons and their stability in a nonlinear Su-Schrieffer-Heeger model
Authors:
Y. -P. Ma,
H. Susanto
Abstract:
We study continuations of topological edge states in the Su-Schrieffer-Heeger model with on-site cubic (Kerr) nonlinearity, which is a 1D nonlinear photonic topological insulator (TI). Based on the topology of the underlying spatial dynamical system, we establish the existence of nonlinear edge states (edge solitons) for all positive energies in the topological band gap. We discover that these edg…
▽ More
We study continuations of topological edge states in the Su-Schrieffer-Heeger model with on-site cubic (Kerr) nonlinearity, which is a 1D nonlinear photonic topological insulator (TI). Based on the topology of the underlying spatial dynamical system, we establish the existence of nonlinear edge states (edge solitons) for all positive energies in the topological band gap. We discover that these edge solitons are stable at any energy when the ratio between the weak and strong couplings is below a critical value. Above the critical coupling ratio, there are energy intervals where the edge solitons experience an oscillatory instability. Though our paper focuses on a photonic system, we also discuss the broader relevance of our methods and results to 1D nonlinear mechanical TIs.
△ Less
Submitted 25 December, 2021; v1 submitted 23 October, 2020;
originally announced October 2020.
-
Active Matter Class with Second-Order Transition to Quasi-Long-Range Polar Order
Authors:
B. Mahault,
X. -c. Jiang,
E. Bertin,
Y. -q. Ma,
A. Patelli,
X. -q. Shi,
H. Chaté
Abstract:
We introduce and study in two dimensions a new class of dry, aligning, active matter that exhibits a direct transition to orientational order, without the phase-separation phenomenology usually observed in this context. Characterized by self-propelled particles with velocity reversals and ferromagnetic alignment of polarities, systems in this class display quasi-long-range polar order with continu…
▽ More
We introduce and study in two dimensions a new class of dry, aligning, active matter that exhibits a direct transition to orientational order, without the phase-separation phenomenology usually observed in this context. Characterized by self-propelled particles with velocity reversals and ferromagnetic alignment of polarities, systems in this class display quasi-long-range polar order with continuously-varying scaling exponents and yet a numerical study of the transition leads to conclude that it does not belong to the Berezinskii-Kosterlitz-Thouless universality class, but is best described as a standard critical point with algebraic divergence of correlations. We rationalize these findings by showing that the interplay between order and density changes the role of defects.
△ Less
Submitted 28 February, 2018;
originally announced March 2018.
-
The effect of asymmetry of the coil block on self-assembly in ABC coil-rod-coil triblock copolymers
Authors:
X. -G. Han,
H. -H. Meng,
Y. -H. Ma,
S. -L. Ouyang
Abstract:
Using the self-consistent field approach, the effect of asymmetry of the coil block on the microphase separation is focused in ABC coil-rod-coil triblock copolymers. For different fractions of the rod block $f_{\text B}$, some stable structures are observed, i.e., lamellae, cylinders, gyroid, and core-shell hexagonal lattice, and the phase diagrams are constructed. The calculated results show that…
▽ More
Using the self-consistent field approach, the effect of asymmetry of the coil block on the microphase separation is focused in ABC coil-rod-coil triblock copolymers. For different fractions of the rod block $f_{\text B}$, some stable structures are observed, i.e., lamellae, cylinders, gyroid, and core-shell hexagonal lattice, and the phase diagrams are constructed. The calculated results show that the effect of the coil block fraction $f_{\text A}$ is dependent on $f_{\text B}$. When $f_{\text B}=0.2$, the effect of asymmetry of the coil block is similar to that of the ABC flexible triblock copolymers; When $f_{\text B}=0.4$, the self-assembly of ABC coil-rod-coil triblock copolymers behaves like rod-coil diblock copolymers under some condition. When $f_{\text B}$ continues to increase, the effect of asymmetry of the coil block reduces. For $f_{\text B}=0.4$, under the symmetrical and rather asymmetrical conditions, an increase in the interaction parameter between different components leads to different transitions between cylinders and lamellae. The results indicate some remarkable effect of the chain architecture on self-assembly, and can provide the guidance for the design and synthesis of copolymer materials.
△ Less
Submitted 14 December, 2017;
originally announced December 2017.
-
Adiabatic Dynamics of Edge Waves in Photonic Graphene
Authors:
M. J. Ablowitz,
C. W. Curtis,
Y. -P. Ma
Abstract:
The propagation of localized edge modes in photonic honeycomb lattices, formed from an array of adiabatically varying periodic helical waveguides, is considered. Asymptotic analysis leads to an explicit description of the underlying dynamics. Depending on parameters, edge states can exist over an entire period or only part of a period; in the latter case an edge mode can effectively disintegrate a…
▽ More
The propagation of localized edge modes in photonic honeycomb lattices, formed from an array of adiabatically varying periodic helical waveguides, is considered. Asymptotic analysis leads to an explicit description of the underlying dynamics. Depending on parameters, edge states can exist over an entire period or only part of a period; in the latter case an edge mode can effectively disintegrate and scatter into the bulk. In the presence of nonlinearity, a `time'-dependent one-dimensional nonlinear Schrödinger (NLS) equation describes the envelope dynamics of edge modes. When the average of the `time varying' coefficients yields a focusing NLS equation, soliton propagation is exhibited. For both linear and nonlinear systems, certain long lived traveling modes with minimal backscattering are found; they exhibit properties of topologically protected states.
△ Less
Submitted 24 November, 2014;
originally announced November 2014.
-
Self-consistent field theoretic simulations of amphiphilic triblock copolymer solutions: Polymer concentration and chain length effects
Authors:
X. -G. Han,
Y. -H. Ma
Abstract:
Using the self-consistent field lattice model, polymer concentration $\barφ_{P}$ and chain length $N$ (keeping the length ratio of hydrophobic to hydrophilic blocks constant) the effects on temperature-dependent behavior of micelles are studied, in amphiphilic symmetric ABA triblock copolymer solutions. When chain length is increased, at fixed $\barφ_{P}$, micelles occur at higher temperature. Th…
▽ More
Using the self-consistent field lattice model, polymer concentration $\barφ_{P}$ and chain length $N$ (keeping the length ratio of hydrophobic to hydrophilic blocks constant) the effects on temperature-dependent behavior of micelles are studied, in amphiphilic symmetric ABA triblock copolymer solutions. When chain length is increased, at fixed $\barφ_{P}$, micelles occur at higher temperature. The variations of average volume fraction of stickers $\barφ_\textrm{co}^\textrm{s}$ and the lattice site numbers $N_\textrm{co}^\textrm{ls}$ at the micellar cores with temperature are dependent on $N$ and $\barφ_{P}$, which demonstrates that the aggregation of micelles depends on $N$ and $\barφ_{P}$. Moreover, when $\barφ_{P}$ is increased, firstly a peak appears on the curve of specific heat $C_V$ for unimer-micelle transition, and then in addition a primary peak, the secondary peak, which results from the remicellization, is observed on the curve of $C_V$. For a long chain, in intermediate and high concentration regimes, the shape of specific heat peak markedly changes, and the peak tends to be a more broad peak. Finally, the aggregation behavior of micelles is explained by the aggregation way of amphiphilic triblock copolymer. The obtained results are helpful in understanding the micellar aggregation process.
△ Less
Submitted 9 July, 2014;
originally announced July 2014.
-
Effect of polymer concentration and length of hydrophobic end block on the unimer-micelle transition broadness in amphiphilic ABA symmetric triblock copolymer solutions
Authors:
X. -G. Han,
Y. -H. Ma,
S. -L. Ouyang
Abstract:
The effects of the length of each hydrophobic end block N_{st} and polymer concentration \barφ_{P} on the transition broadness in amphiphilic ABA symmetric triblock copolymer solutions are studied using the self-consistent field lattice model. When the system is cooled, micelles are observed, i.e.,the homogenous solution (unimer)-micelle transition occurs. When N_{st} is increased, at fixed \barφ_…
▽ More
The effects of the length of each hydrophobic end block N_{st} and polymer concentration \barφ_{P} on the transition broadness in amphiphilic ABA symmetric triblock copolymer solutions are studied using the self-consistent field lattice model. When the system is cooled, micelles are observed, i.e.,the homogenous solution (unimer)-micelle transition occurs. When N_{st} is increased, at fixed \barφ_{P}, micelles occur at higher temperature, and the temperature-dependent range of micellar aggregation and half-width of specific heat peak for unimer-micelle transition increase monotonously. Compared with associative polymers, it is found that the magnitude of the transition broadness is determined by the ratio of hydrophobic to hydrophilic blocks, instead of chain length. When \barφ_{P} is decreased, given a large N_{st}, the temperature-dependent range of micellar aggregation and half-width of specific heat peak initially decease, and then remain nearly constant. It is shown that the transition broadness is concerned with the changes of the relative magnitudes of the eductions of nonstickers and solvents from micellar cores.
△ Less
Submitted 24 September, 2013;
originally announced September 2013.
-
Effect of distribution of stickers along backbone on temperature-dependent structural properties in associative polymer solutions
Authors:
X. -G. Han,
X. -F. Zhang,
Y. -H. Ma
Abstract:
Effect of distribution of stickers along the backbone on structural properties in associating polymer solutions is studied using self-consistent field lattice model. Only two inhomogeneous morphologies, i.e., microfluctuation homogenous (MFH) and micelle morphologies, are observed. If the system is cooled, the solvent content within the aggregates decreases. When the spacing of stickers along the…
▽ More
Effect of distribution of stickers along the backbone on structural properties in associating polymer solutions is studied using self-consistent field lattice model. Only two inhomogeneous morphologies, i.e., microfluctuation homogenous (MFH) and micelle morphologies, are observed. If the system is cooled, the solvent content within the aggregates decreases. When the spacing of stickers along the backbone is increased the temperature-dependent range of aggregation in MFH morphology and half-width of specific heat peak for homogenous solutions-MFH transition increase, and the symmetry of the peak decreases. However, with increasing spacing of stickers, the above three corresponding quantities related to micelles behave differently. It is demonstrated that the broad nature of the observed transitions can be ascribed to the structural changes which accompany the replacement of solvents in aggregates by polymer, which is consistent with the experimental conclusion. It is found that different effect of spacing of stickers on the two transitions can be interpreted in terms of intrachain and interchain associations.
△ Less
Submitted 5 October, 2012;
originally announced October 2012.
-
Effects of polymer concentration and chain length on aggregation in physically associating polymer solutions
Authors:
X. -G. Han,
X. -F. Zhang,
Y. -H. Ma,
C. -X. Zhang,
Y. -B. Guan
Abstract:
The effects of polymer concentration and chain length on aggregation in associative polymer solutions, are studied using self-consistent field lattice model. Only two inhomogenous morphologies, i.e. microfluctuation homogenous (MFH) and micelle morphologies, are observed in the systems with different chain lengths. The temperatures at which the above two inhomogenous morphologies first appear, whi…
▽ More
The effects of polymer concentration and chain length on aggregation in associative polymer solutions, are studied using self-consistent field lattice model. Only two inhomogenous morphologies, i.e. microfluctuation homogenous (MFH) and micelle morphologies, are observed in the systems with different chain lengths. The temperatures at which the above two inhomogenous morphologies first appear, which are denoted by T_MFH and T_m, respectively, are dependent on polymer concentration and chain length. The variation of the logarithm of critical MFH concentration with the logarithm of chain length fulfils a linear-fitting relationship with a slope equaling -1. Furthermore, the variation of the average volume fraction of stickers at the micellar core (AVFSM) with polymer concentration and chain length is focused in the system at T_m. It is founded by calculations that the above behavior of AVFSM, is explained in terms of intrachain and interchain associations.
△ Less
Submitted 21 February, 2012;
originally announced February 2012.
