Showing 1–50 of 86 results for author: Luo, K

High-mobility heavy quasiparticles in a van der Waals antiferromagnetic dense Kondo lattice CeTe$_3$

Authors: Hai Zeng, Yang Zhang, Bingke Ji, Jiaqiang Cai, Shuo Zou, Zhuo Wang, Chao Dong, Kangjian Luo, Yang Yuan, Kai Wang, Jinglei Zhang, Chuanyin Xi, Junfeng Wang, Yaomin Dai, Jing Li, Yongkang Luo

Abstract: Two-dimensional van der Waals (vdW) materials exhibit high carrier mobility and tunability, making them suitable for low-power, high-performance electronic and spintronic applications. Incorporating narrow-band electronic correlation effects could further promote tunability, though mass renormalization may impact carrier mobility. It is therefore challenging to identify a vdW material with both hi… ▽ More Two-dimensional van der Waals (vdW) materials exhibit high carrier mobility and tunability, making them suitable for low-power, high-performance electronic and spintronic applications. Incorporating narrow-band electronic correlation effects could further promote tunability, though mass renormalization may impact carrier mobility. It is therefore challenging to identify a vdW material with both high mobility and strong correlation. Herein, by a combination of optical spectroscopy and high-field quantum-oscillation measurements, we observe significant effective-mass enhancement in CeTe$_3$ at low temperature, arising from not only the band-structure modulation by antiferromagnetic ordering but also the narrow-band correlation effect. Despite the mass enhancement, the quantum mobility surprisingly \textit{increases} and reaches $\sim$2403 cm$^2$/Vs, likely benefiting from topological protection. Remarkably, these unique properties are maintained in atomically thin nanoflakes with quantum mobility enhanced to $\sim$3158 cm$^2$/Vs. Thus, CeTe$_3$ emerges as a promising vdW antiferromagnetic metal with high-mobility heavy quasiparticles, potentially unlocking new device concepts. △ Less

Submitted 30 June, 2025; originally announced June 2025.

Comments: 21+6 pages, 4+6 figures, 1 table

Pressure dependence of liquid iron viscosity from machine-learning molecular dynamics

Authors: Kai Luo, Xuyang Long, R. E. Cohen

Abstract: We have developed a machine-learning potential that accurately models the behavior of iron under the conditions of Earth's core. By performing numerous nanosecond scale equilibrium molecular dynamics simulations, the viscosities of liquid iron for the whole outer core conditions are obtained with much less uncertainty. We find that the Einstein-Stokes relation is not accurate for outer core condit… ▽ More We have developed a machine-learning potential that accurately models the behavior of iron under the conditions of Earth's core. By performing numerous nanosecond scale equilibrium molecular dynamics simulations, the viscosities of liquid iron for the whole outer core conditions are obtained with much less uncertainty. We find that the Einstein-Stokes relation is not accurate for outer core conditions. The viscosity is on the order of 10s \si{mPa.s}, in agreement with previous first-principles results. We present a viscosity map as a function of pressure and temperature for liquid iron useful for geophysical modeling. △ Less

Submitted 24 June, 2025; originally announced June 2025.

Extreme-Band-Gap Semiconductors with Shallow Dopants and Mobile Carriers

Authors: Sieun Chae, Nocona Sanders, Kelsey A. Mengle, Amanda Wang, Xiao Zhang, Jon Lafuente Bartolome, Kaifa Luo, Yen-Chun Huang, Feliciano Giustino, John T. Heron, Emmanouil Kioupakis

Abstract: The conventional distinction between semiconductors and insulators is often based on the magnitude of the band gap, with materials exhibiting gaps wider than 3 eV typically classified as insulators. However, the emergence of ultra-wide-band-gap (UWBG) semiconductors such as AlGaN, diamond, BN, and Ga2O3 challenges this paradigm for materials classification and raises fundamental questions about th… ▽ More The conventional distinction between semiconductors and insulators is often based on the magnitude of the band gap, with materials exhibiting gaps wider than 3 eV typically classified as insulators. However, the emergence of ultra-wide-band-gap (UWBG) semiconductors such as AlGaN, diamond, BN, and Ga2O3 challenges this paradigm for materials classification and raises fundamental questions about the upper bound of band gaps compatible with semiconducting behavior. Here we develop a computational-discovery strategy to identify semiconductors with band gaps exceeding that of AlN (6.2 eV), while retaining essential semiconducting properties such as shallow dopants and mobile charge carriers. We discover that materials composed of light elements in densely packed crystal structures exhibit wide band gaps and light carrier effective masses that enable shallow dopants, high mobility, and weak polaron binding. By applying the hydrogenic Bohr model and first-principles defect calculations - validated against available experimental data - to screen for materials with shallow dopants, we identify dopable compounds with gaps as wide as 9.5 eV that nonetheless host mobile charge carriers. Our findings demonstrate that semiconducting behavior persists even at extreme band gaps, far beyond conventional upper bounds traditionally associated with semiconductor materials. △ Less

Submitted 8 June, 2025; originally announced June 2025.

Direct evidence and atomic-scale mechanisms of reduced dislocation mobility in an inorganic semiconductor under illumination

Authors: Mingqiang Li, Kun Luo, Xiumei Ma, Boran Kumral, Peng Gao, Tobin Filleter, Qi An, Yu Zou

Abstract: Photo-plasticity in semiconductors, wherein their mechanical properties such as strength, hardness and ductility are influenced by light exposure, has been reported for several decades. Although such phenomena have drawn significant attention for the manufacturability and usage of deformable semiconductor devices, their underlying mechanisms are not well understood due to the lack of direct eviden… ▽ More Photo-plasticity in semiconductors, wherein their mechanical properties such as strength, hardness and ductility are influenced by light exposure, has been reported for several decades. Although such phenomena have drawn significant attention for the manufacturability and usage of deformable semiconductor devices, their underlying mechanisms are not well understood due to the lack of direct evidence. Here we provide experimental observation and atomic insights into the reduced mobility of dislocations in zinc sulfide, as a model material, under light. Using photo-nanoindentation and transmission electron microscopy, we observe that dislocations glide shorter distances under light than those in darkness and there are no apparent deformation twins in both conditions. By atomic-scale simulations, we demonstrate that the decreased dislocation mobility is attributed to the increased Peierls stress for dislocation motion and enhanced stress fields around dislocation cores due to photoexcitation. This study improves the understanding of photo-plastic effects in inorganic semiconductors, offering the opportunities for modulating their mechanical properties using light. △ Less

Submitted 24 March, 2025; originally announced March 2025.

Sublayers Editing of Covalent MAX Phase for Nanolaminated Early Transition Metal Compounds

Authors: Ziqian Li, Ke Chen, Xudong Wang, Kan Luo, Lei Lei, Mian Li, Kun Liang, Degao Wang, Shiyu Du, Zhifang Chai, Qing Huang

Abstract: Two-dimensional transition metal carbides and nitrides (MXenes) have gained popularity in fields such as energy storage, catalysis, and electromagnetic interference due to their diverse elemental compositions and variable surface terminations (T). Generally, the synthesis of MXene materials involves etching the weak M-A metallic bonds in the ternary layered transition metal carbides and nitrides (… ▽ More Two-dimensional transition metal carbides and nitrides (MXenes) have gained popularity in fields such as energy storage, catalysis, and electromagnetic interference due to their diverse elemental compositions and variable surface terminations (T). Generally, the synthesis of MXene materials involves etching the weak M-A metallic bonds in the ternary layered transition metal carbides and nitrides (MAX phase) using HF acid or Lewis acid molten salts, while the strong M-X covalent bonds preserve the two-dimensional framework structure of MXenes. On the other hand, the MAX phase material family also includes a significant class of members where the A site is occupied by non-metal main group elements (such as sulfur and phosphorus), in which both M-A and M-X are covalent bond-type sublayers. The aforementioned etching methods cannot be used to synthesize MXene materials from these parent phases. In this work, we discovered that the covalent bond-type M-A and M-X sublayers exhibit different reactivity with some inorganic materials in a high-temperature molten state. By utilizing this difference in reactivity, we can structurally modify these covalent sublayers, allowing for the substitution of elements at the X site (from B to Se, S, P, C) and converting non-metal A site atoms in non-van der Waals (non-vdW) MAX phases into surface atoms in vdW layered materials. This results in a family of early transition metal Xide chalcogenides (TMXCs) that exhibit lattice characteristics of both MXenes and transition metal chalcogenides. Using electron-donor chemical scissors, these TMXC layered materials can be further exfoliated into monolayer nanosheets. The atomic configurations of each atom in these monolayer TMXCs are the same as those of conventional MXenes, but the oxidation states of the M-site atoms can be regulated by both X-site atoms and intercalated cations. △ Less

Submitted 2 December, 2024; originally announced December 2024.

Hybrid ferroelectric tunnel junctions: State-of-the-art, challenges and opportunities

Authors: King-Fa Luo, Zhijun Ma, Daniel Sando, Qi Zhang, Nagarajan Valanoor

Abstract: Ferroelectric tunnel junctions (FTJs) harness the unique combination of ferroelectricity and quantum tunneling, and thus herald new opportunities in next-generation nonvolatile memory technologies. Recent advancements in the fabrication of ultrathin heterostructures have enabled the integration of ferroelectrics with various functional materials, forming hybrid tunneling-diode junctions. These jun… ▽ More Ferroelectric tunnel junctions (FTJs) harness the unique combination of ferroelectricity and quantum tunneling, and thus herald new opportunities in next-generation nonvolatile memory technologies. Recent advancements in the fabrication of ultrathin heterostructures have enabled the integration of ferroelectrics with various functional materials, forming hybrid tunneling-diode junctions. These junctions benefit from the modulation of the functional layer/ferroelectric interface through ferroelectric polarization, thus enabling further modalities and functional capabilities than in addition to tunneling electroresistance. This perspective aims to provide in-depth insight into novel physical phenomena of several typical ferroelectric hybrid junctions, ranging from ferroelectric/dielectric, ferroelectric/multiferroic, ferroelectric/superconducting to ferroelectric/2D materials, and finally their expansion into the realm of ferroelectric resonant tunneling diodes (FeRTDs). This latter aspect, i.e., resonant tunneling offers a radically new approach to exploiting tunneling behavior in ferroelectric heterostructures. We discuss examples that have successfully shown room temperature ferroelectric control of parameters such as the resonant peak, tunnel current ratio at peak and negative differential resistance. We conclude the perspective by summarizing the challenges and highlighting the opportunities for the future development of hybrid FTJs with a special emphasis on a new possible type of FeRTD device. The prospects for enhanced performance and expanded functionality ignite tremendous excitement in hybrid FTJs and FeRTDs for future nanoelectronics. △ Less

Submitted 21 November, 2024; originally announced November 2024.

Incommensurate Transverse Peierls Transition

Authors: F. Z. Yang, K. F. Luo, Weizhe Zhang, Xiaoyu Guo, W. R. Meier, H. Ni, H. X. Li, P. Mercado Lozano, G. Fabbris, A. H. Said, C. Nelson, T. T. Zhang, A. F. May, M. A. McGuire, R. Juneja, L. Lindsay, H. N. Lee, J. -M. Zuo, M. F. Chi, X. Dai, Liuyan Zhao, H. Miao

Abstract: In one-dimensional quantum materials, conducting electrons and the underlying lattices can undergo a spontaneous translational symmetry breaking, known as Peierls transition. For nearly a century, the Peierls transition has been understood within the paradigm of electron-electron interactions mediated by longitudinal acoustic phonons. This classical picture has recently been revised in topological… ▽ More In one-dimensional quantum materials, conducting electrons and the underlying lattices can undergo a spontaneous translational symmetry breaking, known as Peierls transition. For nearly a century, the Peierls transition has been understood within the paradigm of electron-electron interactions mediated by longitudinal acoustic phonons. This classical picture has recently been revised in topological semimetals, where transverse acoustic phonons can couple with conducting p-orbital electrons and give rise to an unconventional Fermi surface instability, dubbed the transverse Peierls transition (TPT). Most interestingly, the TPT induced lattice distortions can further break rotation or mirror/inversion symmetries, leading to nematic or chiral charge density waves (CDWs). Quantum materials that host the TPT, however, have not been experimentally established. Here, we report the experimental discovery of an incommensurate TPT in the tetragonal Dirac semimetal EuAl$_4$. Using inelastic x-ray scattering with meV resolution, we observe the complete softening of a transverse acoustic phonon at the CDW wavevector upon cooling, whereas the longitudinal acoustic phonon is nearly unchanged. Combining with first principles calculations, we show that the incommensurate CDW wavevector matches the calculated charge susceptibility peak and connects the nested Dirac bands with Al 3$p_{x}$ and 3$p_{y}$ orbitals. Supplemented by second harmonic generation measurements, we show that the CDW induced lattice distortions break all vertical and diagonal mirrors whereas the four-fold rotational symmetry is retained below the CDW transition. Our observations strongly suggest a chiral CDW in EuAl$_4$ and highlight the TPT as a new avenue for chiral quantum states. △ Less

Submitted 14 October, 2024; originally announced October 2024.

Comments: Supplementary materials are available upon request

Elastic properties of Cu-6wt\%Ag alloy wires for pulsed magnets investigated by ultrasonic techniques

Authors: Ziyu Li, Tianyi Gu, Wenqi Wei, Yang Yuan, Zhuo Wang, Kangjian Luo, Yupeng Pan, Jianfeng Xie, Shaozhe Zhang, Tao Peng, Lin Liu, Qi Chen, Xiaotao Han, Yongkang Luo, Liang Li

Abstract: Conductor materials with good mechanical performance as well as high electrical- and thermal-conductivities are particularly important to break through the current bottle-neck limit ($\sim 100$ T) of pulsed magnets. Here we perform systematic studies on the elastic properties of the Cu-6wt\%Ag alloy wires, a promising candidate material for the new-generation pulsed magnets, by employing two indep… ▽ More Conductor materials with good mechanical performance as well as high electrical- and thermal-conductivities are particularly important to break through the current bottle-neck limit ($\sim 100$ T) of pulsed magnets. Here we perform systematic studies on the elastic properties of the Cu-6wt\%Ag alloy wires, a promising candidate material for the new-generation pulsed magnets, by employing two independent ultrasonic techniques - resonant ultrasound spectroscopy (RUS) and ultrasound pulse-echo experiments. Our RUS measurements manifest that the elastic properties of the Cu-6wt\%Ag alloy wires can be improved by an electroplastic drawing procedure as compared with the conventional cold drawing. We also take this chance to test the availability of our newly-built ultrasound pulse-echo facility at Wuhan National High Magnetic Field Center (WHMFC, China), and the results suggest that the elastic performance of the electroplastically-drawn Cu-6wt\%Ag alloy wire remains excellent without anomalous softening under extreme conditions, e.g., ultra-high magnetic field up to 50 T, nitrogen / helium cryogenic liquids. △ Less

Submitted 8 January, 2025; v1 submitted 12 October, 2024; originally announced October 2024.

Comments: 7 pages, 4 figures, 1 table

Journal ref: Chin. Phys. B 34, 020701 (2025)

Dispersive wave propagation in disordered flexible fibers enhances stress attenuation

Authors: Peng Wang, Thomas Pähtz, Kun Luo, Yu Guo

Abstract: We experimentally and computationally analyze impact-shock-induced stress wave propagation in packings of disordered flexible fibers. We find that dispersive wave propagation, associated with large stress attenuation, occurs much more prevalently in systems with larger fiber aspect ratios and moderate fiber flexibility. We trace these features to the microstructural properties of fiber contact cha… ▽ More We experimentally and computationally analyze impact-shock-induced stress wave propagation in packings of disordered flexible fibers. We find that dispersive wave propagation, associated with large stress attenuation, occurs much more prevalently in systems with larger fiber aspect ratios and moderate fiber flexibility. We trace these features to the microstructural properties of fiber contact chains and the energy-trapping abilities of deformable fibers. These findings provide new insights into physics of the shock-impacted flexible fiber packings and open the way towards an improved granular-material-based damping technology. △ Less

Submitted 17 September, 2024; originally announced September 2024.

Comments: 6 pages, 6 figures

Journal ref: Physical Review E 111, 015412 (2025)

Spin-filter tunneling detection of antiferromagnetic resonance with electrically-tunable damping

Authors: Thow Min Jerald Cham, Daniel G. Chica, Xiaoxi Huang, Kenji Watanabe, Takashi Taniguchi, Xavier Roy, Yunqiu Kelly Luo, Daniel C. Ralph

Abstract: Antiferromagnetic spintronics offers the potential for higher-frequency operations and improved insensitivity to magnetic fields compared to ferromagnetic spintronics. However, previous electrical techniques to detect antiferromagnetic dynamics have utilized large, millimeter-scale bulk crystals. Here we demonstrate direct electrical detection of antiferromagnetic resonance in structures on the fe… ▽ More Antiferromagnetic spintronics offers the potential for higher-frequency operations and improved insensitivity to magnetic fields compared to ferromagnetic spintronics. However, previous electrical techniques to detect antiferromagnetic dynamics have utilized large, millimeter-scale bulk crystals. Here we demonstrate direct electrical detection of antiferromagnetic resonance in structures on the few-micrometer scale using spin-filter tunneling in PtTe$_2$/bilayer CrSBr/graphite junctions in which the tunnel barrier is the van der Waals antiferromagnet CrSBr. This sample geometry allows not only efficient detection, but also electrical control of the antiferromagnetic resonance through spin-orbit torque from the PtTe$_2$ electrode. The ability to efficiently detect and control antiferromagnetic resonance enables detailed studies of the physics governing these high frequency dynamics. △ Less

Submitted 19 April, 2025; v1 submitted 12 July, 2024; originally announced July 2024.

Understanding chiral charge-density wave by frozen chiral phonon

Authors: Shuai Zhang, Kaifa Luo, Tiantian Zhang

Abstract: Charge density wave (CDW) is discovered within a wide interval in solids, however, its microscopic nature is still not transparent in most realistic materials, and the recently studied chiral ones with chiral structural distortion remain unclear. In this paper, we try to understand the driving forces of chiral CDW transition by chiral phonons from the electron-phonon coupling scenario. We use the… ▽ More Charge density wave (CDW) is discovered within a wide interval in solids, however, its microscopic nature is still not transparent in most realistic materials, and the recently studied chiral ones with chiral structural distortion remain unclear. In this paper, we try to understand the driving forces of chiral CDW transition by chiral phonons from the electron-phonon coupling scenario. We use the prototypal monolayer 1T-TiSe$_2$ as a case study to unveil the absence of chirality in the CDW transition and propose a general approach, i.e., symmetry-breaking stimuli, to engineer the chirality of CDW in experiments. Inelastic scattering patterns are also studied as a benchmark of chiral CDW (CCDW, which breaks the mirror/inversion symmetry in 2D/3D systems). We notice that the anisotropy changing of Bragg peak profiles, which is contributed by the soft chiral phonons, can show a remarkable signature for CCDW. Our findings pave a path to understanding the CCDW from the chiral phonon perspective, especially in van der Waals materials, and provide a powerful way to manipulate the chirality of CDW. △ Less

Submitted 10 December, 2024; v1 submitted 12 July, 2024; originally announced July 2024.

Journal ref: Zhang, S., Luo, K. & Zhang, T. Understanding chiral charge-density wave by frozen chiral phonon. npj Comput Mater 10, 264 (2024)

Magnetic properties and enhanced magnetocaloric effect in EuAl$_3$Si single crystals

Authors: Hai Zeng, Shuo Zou, Zhou Wang, Ziyu Li, Kangjian Luo, Yongkang Luo

Abstract: This study presents systematic investigations into the growth and physical properties of EuAl$_3$Si single crystals, encompassing magnetic, transport, and thermodynamic analyses. EuAl$_3$Si undergoes a ferromagnetic transition at $T_C$ = 15 K. A significant reversible magnetocaloric effect was observed around $T_C$. Strikingly, with a small change of magnetic field 2 T, the maximum values of magne… ▽ More This study presents systematic investigations into the growth and physical properties of EuAl$_3$Si single crystals, encompassing magnetic, transport, and thermodynamic analyses. EuAl$_3$Si undergoes a ferromagnetic transition at $T_C$ = 15 K. A significant reversible magnetocaloric effect was observed around $T_C$. Strikingly, with a small change of magnetic field 2 T, the maximum values of magnetic entropy change (13.4 J/kg K), refrigerant capacity (166 J/kg) and adiabatic temperature change (7.2 K) are found. These parameters respectively are 60%, 148% and 64% larger than those of the parent compound EuAl$_4$, and suggest EuAl$_3$Si as an excellent candidate for magnetic refrigeration applications near the temperature of liquid hydrogen. The possible mechanism for this enhancement is also discussed. △ Less

Submitted 8 January, 2025; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: 21 pages, 4 figures, 1 table

Journal ref: J. Appl. Phys. 137, 013910 (2025)

Discrete Boltzmann model with split collision for nonequilibrium reactive flows

Authors: Chuandong Lin, Kai H. Luo, Huilin Lai

Abstract: A multi-relaxation-time discrete Boltzmann model (DBM) with split collision is proposed for both subsonic and supersonic compressible reacting flows, where chemical reactions take place among various components. The physical model is based on a unified set of discrete Boltzmann equations that describes the evolution of each chemical species with adjustable acceleration, specific heat ratio, and Pr… ▽ More A multi-relaxation-time discrete Boltzmann model (DBM) with split collision is proposed for both subsonic and supersonic compressible reacting flows, where chemical reactions take place among various components. The physical model is based on a unified set of discrete Boltzmann equations that describes the evolution of each chemical species with adjustable acceleration, specific heat ratio, and Prandtl number. On the righ-hand side of discrete Boltzmann equations, the collision, force, and reaction terms denote the change rates of distribution functions due to self- and cross-collisions, external forces, and chemical reactions, respectively. The source terms can be calculated in three ways, among which the matrix inversion method possesses the highest physical accuracy and computational efficiency. Through Chapman-Enskog analysis, it is proved that the DBM is consistent with the reactive Navier-Stokes equations, Fick's law and Stefan-Maxwell diffusion equation in the hydrodynamic limit. Compared with the one-step-relaxation model, the split collision model offers a detailed and precise measurement of hydrodynamic, thermodynamic, and chemical nonequilibrium effects. Finally, the model is validated by six benchmarks, including multicomponent diffusion, mixture in the force field, Kelvin-Helmholtz instability, flame at constant pressure, opposing chemical reaction, and steady detonation. △ Less

Submitted 22 April, 2024; v1 submitted 9 March, 2024; originally announced March 2024.

Magnetic-field-induced electronic instability of Weyl-like fermions in compressed black phosphorus

Authors: Lixuan Zheng, Kaifa Luo, Zeliang Sun, Dan Zhao, Jian Li, Dianwu Song, Shunjiao Li, Baolei Kang, Linpeng Nie, Min Shan, Zhimian Wu, Yanbing Zhou, Xi Dai, Hongming Weng, Rui Yu, Tao Wu, Xianhui Chen

Abstract: Revealing the role of Coulomb interaction in topological semimetals with Dirac/Weyl-like band dispersion shapes a new frontier in condensed matter physics. Topological node-line semimetals (TNLSMs), anticipated as a fertile ground for exploring electronic correlation effects due to the anisotropy associated with their node-line structure, have recently attracted considerable attention. In this stu… ▽ More Revealing the role of Coulomb interaction in topological semimetals with Dirac/Weyl-like band dispersion shapes a new frontier in condensed matter physics. Topological node-line semimetals (TNLSMs), anticipated as a fertile ground for exploring electronic correlation effects due to the anisotropy associated with their node-line structure, have recently attracted considerable attention. In this study, we report an experimental observation for correlation effects in TNLSMs realized by black phosphorus (BP) under hydrostatic pressure. By performing a combination of nuclear magnetic resonance measurements and band calculations on compressed BP, a magnetic-field-induced electronic instability of Weyl-like fermions is identified under an external magnetic field parallel to the so-called nodal ring in the reciprocal space. Anomalous spin fluctuations serving as the fingerprint of electronic instability are observed at low temperatures, and they are observed to maximize at approximately 1.0 GPa. This study presents compressed BP as a realistic material platform for exploring the rich physics in strongly coupled Weyl-like fermions. △ Less

Submitted 24 October, 2023; originally announced October 2023.

Comments: 10 pages, 4 figures

Journal ref: Sci. China-Phys. Mech. Astron. 66, 117011 (2023)

Tuning the Curie temperature of a 2D magnet/topological insulator heterostructure to above room temperature by epitaxial growth

Authors: Wenyi Zhou, Alexander J. Bishop, Xiyue S. Zhang, Katherine Robinson, Igor Lyalin, Ziling Li, Ryan Bailey-Crandell, Thow Min Jerald Cham, Shuyu Cheng, Yunqiu Kelly Luo, Daniel C. Ralph, David A. Muller, Roland K. Kawakami

Abstract: Heterostructures of two-dimensional (2D) van der Waals (vdW) magnets and topological insulators (TI) are of substantial interest as candidate materials for efficient spin-torque switching, quantum anomalous Hall effect, and chiral spin textures. However, since many of the vdW magnets have Curie temperatures below room temperature, we want to understand how materials can be modified to stabilize th… ▽ More Heterostructures of two-dimensional (2D) van der Waals (vdW) magnets and topological insulators (TI) are of substantial interest as candidate materials for efficient spin-torque switching, quantum anomalous Hall effect, and chiral spin textures. However, since many of the vdW magnets have Curie temperatures below room temperature, we want to understand how materials can be modified to stabilize their magnetic ordering to higher temperatures. In this work, we utilize molecular beam epitaxy to systematically tune the Curie temperature ($T_C$) in thin film Fe$_3$GeTe$_2$/Bi$_2$Te$_3$ from bulk-like values ($\sim$220 K) to above room temperature by increasing the growth temperature from 300 $^\circ$C to 375 $^\circ$C. For samples grown at 375 $^\circ$C, cross-sectional scanning transmission electron microscopy (STEM) reveals the spontaneous formation of different Fe$_m$Ge$_n$Te$_2$ compositions (e.g. Fe$_5$Ge$_2$Te$_2$ and Fe$_7$Ge$_6$Te$_2$) as well as intercalation in the vdW gaps, which are possible origins of the enhanced Curie temperature. This observation paves the way for developing various Fe$_m$Ge$_n$Te$_2$/TI heterostructures with novel properties. △ Less

Submitted 25 August, 2023; originally announced August 2023.

Comments: 8 pages, 4 figures

Journal ref: Phys. Rev. Materials 7, 104004 (2023)

Sagnac interferometry for high-sensitivity optical measurements of spin-orbit torque

Authors: Saba Karimeddiny, Thow Min Jerald Cham, Orion Smedley, Daniel C. Ralph, Yunqiu Kelly Luo

Abstract: Sagnac interferometry can provide a significant improvement in signal-to-noise ratio compared to conventional magnetic imaging based on the magneto-optical Kerr effect (MOKE). We show that this improvement is sufficient to allow quantitative measurements of current-induced magnetic deflections due to spin-orbit torque even in thin-film magnetic samples with perpendicular magnetic anisotropy for wh… ▽ More Sagnac interferometry can provide a significant improvement in signal-to-noise ratio compared to conventional magnetic imaging based on the magneto-optical Kerr effect (MOKE). We show that this improvement is sufficient to allow quantitative measurements of current-induced magnetic deflections due to spin-orbit torque even in thin-film magnetic samples with perpendicular magnetic anisotropy for which the Kerr rotation is second-order in the magnetic deflection. Sagnac interfermometry can also be applied beneficially for samples with in-plane anisotropy, for which the Kerr rotation is first order in the deflection angle. Optical measurements based on Sagnac interferometry can therefore provide a cross-check on electrical techniques for measuring spin-orbit torque. Different electrical techniques commonly give quantitatively inconsistent results, so that Sagnac interferometry can help to identify which techniques are affected by unidentified artifacts. △ Less

Submitted 21 July, 2023; originally announced July 2023.

Exchange bias between van der Waals materials: tilted magnetic states and field-free spin-orbit-torque switching

Authors: Thow Min Jerald Cham, Reiley J. Dorrian, Xiyue S. Zhang, Avalon H. Dismukes, Daniel G. Chica, Andrew F. May, Xavier Roy, David A. Muller, Daniel C. Ralph, Yunqiu Kelly Luo

Abstract: Magnetic van der Waals heterostructures provide a unique platform to study magnetism and spintronics device concepts in the two-dimensional limit. Here, we report studies of exchange bias from the van der Waals antiferromagnet CrSBr acting on the van der Waals ferromagnet Fe3GeTe2 (FGT). The orientation of the exchange bias is along the in-plane easy axis of CrSBr, perpendicular to the out-of-plan… ▽ More Magnetic van der Waals heterostructures provide a unique platform to study magnetism and spintronics device concepts in the two-dimensional limit. Here, we report studies of exchange bias from the van der Waals antiferromagnet CrSBr acting on the van der Waals ferromagnet Fe3GeTe2 (FGT). The orientation of the exchange bias is along the in-plane easy axis of CrSBr, perpendicular to the out-of-plane anisotropy of the FGT, inducing a strongly tilted magnetic configuration in the FGT. Furthermore, the in-plane exchange bias provides sufficient symmetry breaking to allow deterministic spin-orbit torque switching of the FGT in CrSBr/FGT/Pt samples at zero applied magnetic field. A minimum thickness of the CrSBr greater than 10 nm is needed to provide a non-zero exchange bias at 30 K. △ Less

Submitted 3 June, 2023; originally announced June 2023.

Thermalization Effect in semiconductor Si, and metallic silicide NiSi2, CoSi2 by using Non-Adiabatic Molecular Dynamics Approach

Authors: Kun Luo, Weizhuo Gan, Zhaozhao Hou, Guohui Zhan, Lijun Xu, Jiangtao Liu, Ye Lu, Zhenhua Wu

Abstract: Recently, cold source transistor (CSFET) with steep-slope subthreshold swing (SS) < 60 mV/decade has been proposed to overcome Boltzmann tyranny in its ballistic regime. However the scattering, especially by inelastic scattering may lead serious SS degradation through cold carrier thermalization. In this study, the electronic excitation/relaxation dynamic process is investigated theoretically by v… ▽ More Recently, cold source transistor (CSFET) with steep-slope subthreshold swing (SS) < 60 mV/decade has been proposed to overcome Boltzmann tyranny in its ballistic regime. However the scattering, especially by inelastic scattering may lead serious SS degradation through cold carrier thermalization. In this study, the electronic excitation/relaxation dynamic process is investigated theoretically by virtue of the state-of-the-art nonadiabatic molecular dynamics (NAMD) method, i.e., the mixed quantum-classical NAMD. The mixed quantum-classical NAMD considers both carrier decoherence and detailed balance to calculate the cold carrier thermalization and transfer processes in semiconductor Si, and metallic silicide (NiSi2 and CoSi2). The dependence of the thermalization factor, relaxation time, scattering time and scattering rate on energy level are obtained. The thermalization of carrier gradually increases from low energy to high energy. Partially thermalization from the ground state to reach the thermionic current window is realized with sub-100 $fs$ time scale. Fully thermalization to entail energy region depends on the barrier height sensitively, i.e., the scattering rate decreases exponentially as the energy of the out-scattering state increase. The scattering rate of NiSi2 and CoSi2 is 2 orders of magnitude higher than that of Si, arising from their higher density of states than that in Silicon This study can shed light on the material design for low power tunneling FET as well as the emerging CSFET. △ Less

Submitted 14 February, 2023; originally announced February 2023.

Comments: 14 pages, 17 figres

First-principles thermal equation of state of fcc iridium

Authors: Kai Luo, Ruifeng Lu, R. E. Cohen

Abstract: The thermal equation of states for fcc iridium (Ir) is obtained from first-principles molecular dynamics up to 3000 K and 540 GPa. The equation of state (EoS) is globally fitted to a simplified free energy model and various parameters are derived. The theoretical principal Hugoniot is compared with shockwave experiments, where discrepancy suggests formation of new Ir phases. A few representative E… ▽ More The thermal equation of states for fcc iridium (Ir) is obtained from first-principles molecular dynamics up to 3000 K and 540 GPa. The equation of state (EoS) is globally fitted to a simplified free energy model and various parameters are derived. The theoretical principal Hugoniot is compared with shockwave experiments, where discrepancy suggests formation of new Ir phases. A few representative EoS parameters, such as bulk modulus $K_T$, thermal expansivity $α$, Grüneisen parameter $γ$, and constant pressure capacity $C_P$, Debye temperature, $Θ_D$ are computed to compare with experimental data △ Less

Submitted 12 January, 2023; originally announced January 2023.

Comments: 10 pages, 12 figures

Harnessing dislocation motion using an electric field

Authors: Mingqiang Li, Yidi Shen, Kun Luo, Qi An, Peng Gao, Penghao Xiao, Yu Zou

Abstract: Dislocations, line defects in crystalline materials, play an essential role in the mechanical[1,2], electrical[3], optical[4], thermal[5], and phase transition[6] properties of these materials. Dislocation motion, an important mechanism underlying crystal plasticity, is critical for the hardening, processing, and application of a wide range of structural and functional materials[1,7,8]. For decade… ▽ More Dislocations, line defects in crystalline materials, play an essential role in the mechanical[1,2], electrical[3], optical[4], thermal[5], and phase transition[6] properties of these materials. Dislocation motion, an important mechanism underlying crystal plasticity, is critical for the hardening, processing, and application of a wide range of structural and functional materials[1,7,8]. For decades, the movement of dislocations has been widely observed in crystalline solids under mechanical loading[9-11]. However, the goal of manipulating dislocation motion via a non-mechanical field alone remains elusive. Here, we present real-time observations of dislocation motion controlled solely by an external electric field in single-crystalline zinc sulfide (ZnS). We find that 30° partial dislocations can move back and forth depending on the direction of the electric field, while 90° partial dislocations are motionless. We reveal the nonstoichiometric nature of dislocation cores using atomistic imaging and determine their charge characteristics by density functional theory calculations. The glide barriers of charged 30° partial dislocations, which are lower than those of 90° partial dislocations, further decrease under an electric field, explaining the experimental observations. This study provides direct evidence of dislocation dynamics under a non-mechanical stimulus and opens up the possibility of modulating dislocation-related properties. △ Less

Submitted 30 June, 2023; v1 submitted 27 November, 2022; originally announced November 2022.

Comments: https://www.nature.com/articles/s41563-023-01572-7

Journal ref: Nature Materials, 1-6 (2023)

Anisotropic Gigahertz Antiferromagnetic Resonances of the Easy-Axis van der Waals Antiferromagnet CrSBr

Authors: Thow Min Jerald Cham, Saba Karimeddiny, Avalon H. Dismukes, Xavier Roy, Daniel C. Ralph, Yunqiu Kelly Luo

Abstract: We report measurements of antiferromagnetic resonances in the van der Waals easy-axis antiferromagnet CrSBr. The interlayer exchange field and magnetocrystalline anisotropy fields are comparable to laboratory magnetic fields, allowing a rich variety of gigahertz-frequency dynamical modes to be accessed. By mapping the resonance frequencies as a function of the magnitude and angle of applied magnet… ▽ More We report measurements of antiferromagnetic resonances in the van der Waals easy-axis antiferromagnet CrSBr. The interlayer exchange field and magnetocrystalline anisotropy fields are comparable to laboratory magnetic fields, allowing a rich variety of gigahertz-frequency dynamical modes to be accessed. By mapping the resonance frequencies as a function of the magnitude and angle of applied magnetic field we identify the different regimes of antiferromagnetic dynamics. The spectra show good agreement with a Landau-Lifshitz model for two antiferromagnetically-coupled sublattices, accounting for inter-layer exchange and triaxial magnetic anisotropy. Fits allow us to quantify the parameters governing the magnetic dynamics: at 5 K, the interlayer exchange field is $μ_0 H_E =$ 0.395(2) T, and the hard and intermediate-axis anisotropy parameters are $μ_0 H_c =$ 1.30(2) T and $μ_0 H_a =$ 0.383(7) T. The existence of within-plane anisotropy makes it possible to control the degree of hybridization between the antiferromagnetic resonances using an in-plane magnetic field. △ Less

Submitted 5 August, 2022; v1 submitted 2 June, 2022; originally announced June 2022.

Comments: 50 pages 16 Figures

Transverse Peierls Transition

Authors: Kaifa Luo, Xi Dai

Abstract: In the present paper, we have discussed a new type of spontaneous symmetry breaking phases caused by the softening of the transverse acoustic phonon modes through the electron phonon coupling. These new phases include the shear density wave and self-twisting wave, which are caused by the softening of linearly and circularly polarized acoustic phonon modes, respectively. We propose that two of the… ▽ More In the present paper, we have discussed a new type of spontaneous symmetry breaking phases caused by the softening of the transverse acoustic phonon modes through the electron phonon coupling. These new phases include the shear density wave and self-twisting wave, which are caused by the softening of linearly and circularly polarized acoustic phonon modes, respectively. We propose that two of the topological semimetal systems in the quantum limit, where the electrons only occupy the lowest Landau bands under external magnetic field, will be the perfect systems to realize these new phases. Exotic physical effects will be induced in these new phases, including the 3D quantum Hall effect, chiral standing acoustic wave, magneto-acoustic effects and chiral phonon correction to Einstein-de Hass effect. △ Less

Submitted 10 April, 2022; originally announced April 2022.

Novel boron nitride polymorphs with graphite-diamond hybrid structure

Authors: Kun Luo, Baozhong Li, Lei Sun, Yingju Wu, Yanfeng Ge, Bing Liu, Julong He, Bo Xu, Zhisheng Zhao, Yongjun Tian

Abstract: Both boron nitride (BN) and carbon (C) have sp, sp2 and sp3 hybridization modes, and thus resulting in a variety of BN and C polymorphs with similar structures, such as hexagonal BN (hBN) and graphite, cubic BN (cBN) and diamond. Here, five types of BN polymorph structures were proposed theoretically, inspired by the graphite-diamond hybrid structures discovered in recent experiment. These BN poly… ▽ More Both boron nitride (BN) and carbon (C) have sp, sp2 and sp3 hybridization modes, and thus resulting in a variety of BN and C polymorphs with similar structures, such as hexagonal BN (hBN) and graphite, cubic BN (cBN) and diamond. Here, five types of BN polymorph structures were proposed theoretically, inspired by the graphite-diamond hybrid structures discovered in recent experiment. These BN polymorphs with graphite-diamond hybrid structures possessed excellent mechanical properties with combined high hardness and high ductility, and also exhibited various electronic properties such as semi-conductivity, semi-metallicity, and even one- and two-dimensional conductivity, differing from known insulators hBN and cBN. The simulated diffraction patterns of these BN hybrid structures could account for the unsolved diffraction patterns of intermediate products composed of "compressed hBN" and diamond-like BN, caused by phase transitions in previous experiments. Thus, this work provides a theoretical basis for the presence of these types of hybrid materials during phase transitions between graphite-like and diamond-like BN polymorphs. △ Less

Submitted 2 March, 2022; v1 submitted 30 December, 2021; originally announced December 2021.

Journal ref: Chin. Phys. Lett. 39, 036301 (2022)

Superconductivity in graphite-diamond hybrid

Authors: Yanfeng Ge, Kun Luo, Yong Liu, Guochun Yang, Wentao Hu, Baozhong Li, Guoying Gao, Xiang-Feng Zhou, Bo Xu, Zhisheng Zhao, Yongjun Tian

Abstract: Search for new high-temperature superconductors and insight into their superconducting mechanism are of fundamental importance in condensed matter physics. The discovery of near-room temperature superconductivity at more than a million atmospheres ushers in a new era for superconductors. However, the critical task of identifying materials with comparable superconductivity at near or ambient pressu… ▽ More Search for new high-temperature superconductors and insight into their superconducting mechanism are of fundamental importance in condensed matter physics. The discovery of near-room temperature superconductivity at more than a million atmospheres ushers in a new era for superconductors. However, the critical task of identifying materials with comparable superconductivity at near or ambient pressure remains. Carbon materials can always lead to intriguing surprises due to their structural diversity and electronic adjustability. Insulating diamond upon doping or external stimuli has achieved superconducting state. Thus, it still has a great opportunity to find superconducting ones with higher transition temperature (Tc). Here, we report an intrinsic superconducting graphite-diamond hybrid through first-principles calculations, whose atomic-resolution structural characteristics have been experimentally determined recently. The predicted Tc is approximated at 39 K at ambient pressure, and strain energizing can further boost Tc to 42 K. The strong electron-phonon coupling associated with the out-of-plane vibration of carbon atoms at the junction plays a dominant role in the superconducting transition. Our work demonstrates the great potential of such carbon materials as high-Tc superconductors, which will definitely attract extensive research. △ Less

Submitted 27 November, 2021; originally announced November 2021.

Comments: 11 pages, 3 figures

Report number: 23, 100630

Journal ref: Materials Today Physics (2022)

The Rendering from the Periodic System of the Elements on the stability, elastic, and electronic properties of M2AC phases

Authors: Erxiao Wu, Yiming Zhang, Mian Li, Youbing Li, Kan Luo, Shiyu Du, Qing Huang

Abstract: MAX phases are nanolaminated ternary materials that combine metallic and ceramic properties. Currently, the A-site elements replacement in traditional ones by later transition-metals opens a door to explore new types of MAX phases. In this work, we performed a systematic first-principle study to explore trends in stability, electronic structure and mechanical properties of 288 compositions of M2AX… ▽ More MAX phases are nanolaminated ternary materials that combine metallic and ceramic properties. Currently, the A-site elements replacement in traditional ones by later transition-metals opens a door to explore new types of MAX phases. In this work, we performed a systematic first-principle study to explore trends in stability, electronic structure and mechanical properties of 288 compositions of M2AX phases (M=Ti, V, Cr, Zr, Nb, Mo, Hf, Ta, W; A=Al, Si, P, S, Ga, Ge, As, Se, In, Sn, Sb, Te, Tl, Pb, Bi, Mn, Fe, Co, Ni, Cu, Zn, Tc, Ru, Rh, Pd, Ag, Cd, Os, Ir, Pt, Au, Hg; X=C). Such a dataset, combined with the rigid-band model been applied to most transition metal carbides, shows us the fundamental trends in bonding mechanisms and mechanical properties of MAX phases endowed with the periodic arrangements of M/A-site elements. It worth noting, in particular, the M-A d-d interactions of MAX phases uniquely contribute to the elastic constant C33. △ Less

Submitted 23 November, 2021; originally announced November 2021.

Sagnac interferometry for high-sensitivity optical measurements of spin-orbit torque

Authors: Saba Karimeddiny, Thow Min Cham, Daniel C. Ralph, Yunqiu Kelly Luo

Abstract: We adapt Sagnac interferometry for magneto-optic Kerr effect measurements of spin-orbit-torque-induced magnetic tilting in thin-film magnetic samples. The high sensitivity of Sagnac interferometry permits for the first time optical quantification of spin-orbit torque from small-angle magnetic tilting of samples with perpendicular magnetic anisotropy (PMA). We find significant disagreement between… ▽ More We adapt Sagnac interferometry for magneto-optic Kerr effect measurements of spin-orbit-torque-induced magnetic tilting in thin-film magnetic samples. The high sensitivity of Sagnac interferometry permits for the first time optical quantification of spin-orbit torque from small-angle magnetic tilting of samples with perpendicular magnetic anisotropy (PMA). We find significant disagreement between Sagnac measurements and simultaneously-performed harmonic Hall (HH) measurements of spin-orbit torque on Pt/Co/MgO and Pd/Co/MgO samples with PMA. The Sagnac results for PMA samples are consistent with both HH and Sagnac measurements for the in-plane geometry, so we conclude that the conventional analysis framework for PMA HH measurements is flawed. We suggest that the explanation for this discrepancy is that although magnetic-field induced magnetic tilting in PMA samples can produce a strong planar Hall effect, when tilting is instead generated by spin-orbit torque it produces negligible change in the planar Hall signal. This very surprising result demonstrates an error in the most-popular method for measuring spin-orbit torques in PMA samples, and represents an unsolved puzzle in understanding the planar Hall effect in magnetic thin films. △ Less

Submitted 28 September, 2021; originally announced September 2021.

Narrow-gap Semiconducting Superhard Amorphous Carbon with Superior Toughness

Authors: Shuangshuang Zhang, Yingju Wu, Kun Luo, Bing Liu, Yu Shu, Yang Zhang, Lei Sun, Yufei Gao, Mengdong Ma, Zihe Li, Baozhong Li, Pan Ying, Zhisheng Zhao, Wentao Hu, Vicente Benavides, Olga P. Chernogorova, Alexander V. Soldatov, Julong He, Dongli Yu, Bo Xu, Yongjun Tian

Abstract: New carbon forms exhibiting extraordinary physico-chemical properties can be generated from nanostructured precursors under extreme pressure. Nevertheless, synthesis of such fascinating materials is often not well understood that results, as is the case of C60 precursor, in irreproducibility of the results and impeding further progress in the materials design. Here the semiconducting amorphous car… ▽ More New carbon forms exhibiting extraordinary physico-chemical properties can be generated from nanostructured precursors under extreme pressure. Nevertheless, synthesis of such fascinating materials is often not well understood that results, as is the case of C60 precursor, in irreproducibility of the results and impeding further progress in the materials design. Here the semiconducting amorphous carbon having bandgaps of 0.1-0.3 eV and the advantages of isotropic superhardness and superior toughness over single-crystal diamond and inorganic glasses are produced from transformation of fullerene at high pressure and moderate temperatures. A systematic investigation of the structure and bonding evolution was carried out by using rich arsenal of complimentary characterization methods, which helps to build a model of the transformation that can be used in further high p,T synthesis of novel nanocarbon systems for advanced applications. The produced amorphous carbon materials have the potential of demanding optoelectronic applications that diamond and graphene cannot achieve △ Less

Submitted 15 June, 2021; originally announced June 2021.

Report number: 100575

Journal ref: Cell Reports Physical Science, 2021

Aharonov-Bohm Effect in Three-dimensional Higher-order Topological Insulator

Authors: Kun Luo, Hao Geng, Li Sheng, Wei Chen, D. Y. Xing

Abstract: Hinge states are the hallmark of the 3D higher-order topological insulator(HOTI). Here, we show that chiral hinge states can be identified by the magnetic field induced Aharonov-Bohm(AB) oscillation of the electron conductance in the interferometer constructed by HOTI and normal metal. Unlike AB interferometer of 3D topological insulator(TI), we find that there are different AB oscillation frequen… ▽ More Hinge states are the hallmark of the 3D higher-order topological insulator(HOTI). Here, we show that chiral hinge states can be identified by the magnetic field induced Aharonov-Bohm(AB) oscillation of the electron conductance in the interferometer constructed by HOTI and normal metal. Unlike AB interferometer of 3D topological insulator(TI), we find that there are different AB oscillation frequencies for a given direction of magnetic field in 3D HOTI. And the oscillation frequencies are also strongly depending on the direction of magnetic field. The main conclusion in our work is that there exists a universal linear relation between different oscillation frequencies. Here, by constructing an interference model of hinge states loops, we show both analytically and numerically that the linear relation is fulfilled in the HOTI effective model. The four basic frequencies in the work are labeled as $ω_x$, $ω_y$, $ω_{x+y}$, $ω_{x-y}$ and the main linear relations we demonstrate here are $ω_{x\pm y}=ω_x \pm ω_y$. These results provide an effective way for the identification of the chiral hinge states, and the oscillation signatures are stable with different sample size and bias. △ Less

Submitted 26 August, 2021; v1 submitted 28 January, 2021; originally announced January 2021.

Journal ref: Phys. Rev. B 104, 085427 (2021)

Ultra-high pressure disordered eight-coordinated phase of Mg$_2$GeO$_4$: Analogue for super-Earth mantles

Authors: Rajkrishna Dutta, Sally J. Tracy, Ronald E. Cohen, Francesca Miozzi, Kai Luo, Jing Yang, Pamela C. Burnley, Dean Smith, Yue Meng, Stella Chariton, Vitali B. Prakapenka, Thomas S. Duffy

Abstract: Mg2GeO4 is an analogue for the ultra-high pressure behavior of Mg2SiO4, so we have investigated magnesium germanate to 275 GPa and over 2000 K using a laser-heated diamond anvil cell combined with in situ synchrotron X-ray diffraction and density functional theory (DFT) computations. The experimental results are consistent with a novel phase with disordered Mg and Ge, in which germanium adopts eig… ▽ More Mg2GeO4 is an analogue for the ultra-high pressure behavior of Mg2SiO4, so we have investigated magnesium germanate to 275 GPa and over 2000 K using a laser-heated diamond anvil cell combined with in situ synchrotron X-ray diffraction and density functional theory (DFT) computations. The experimental results are consistent with a novel phase with disordered Mg and Ge, in which germanium adopts eight-fold coordination with oxygen: the cubic Th3P4- type structure. Simulations using the special quasirandom structure (SQS) method suggest partial order in the tetragonal I-42d structure, indistinguishable from I-43d Th3P4 in our experiments. These structures have not been reported before in any oxide. If applicable to silicates, the formation of this highly coordinated and intrinsically disordered phase would have important implications for the interior mineralogy of large, rocky extrasolar planets. △ Less

Submitted 20 August, 2021; v1 submitted 1 January, 2021; originally announced January 2021.

Comments: 13 pages, 5 figures and 18 pages of Supplementary Material

Report number: pnas.2114424119

Journal ref: PNAS 119 (8) e2114424119 (2022)

Random-gate-voltage induced Al'tshuler-Aronov-Spivak effect in topological edge states

Authors: Kun Luo, Wei Chen, Li Sheng, D. Y. Xing

Abstract: Helical edge states are the hallmark of the quantum spin Hall insulator. Recently, several experiments have observed transport signatures contributed by trivial edge states, making it difficult to distinguish between the topologically trivial and nontrivial phases. Here, we show that helical edge states can be identified by the random-gate-voltage induced $Φ_0/2$-period oscillation of the averaged… ▽ More Helical edge states are the hallmark of the quantum spin Hall insulator. Recently, several experiments have observed transport signatures contributed by trivial edge states, making it difficult to distinguish between the topologically trivial and nontrivial phases. Here, we show that helical edge states can be identified by the random-gate-voltage induced $Φ_0/2$-period oscillation of the averaged electron return probability in the interferometer constructed by the edge states. The random gate voltage can highlight the $Φ_0/2$-period Al'tshuler-Aronov-Spivak oscillation proportional to $\sin^2(2πΦ/Φ_0)$ by quenching the $Φ_0$-period Aharonov-Bohm oscillation. It is found that the helical spin texture induced $π$ Berry phase is key to such weak antilocalization behavior with zero return probability at $Φ=0$. In contrast, the oscillation for the trivial edge states may exhibit either weak localization or antilocalization depending on the strength of the spin-orbit coupling, which have finite return probability at $Φ=0$. Our results provide an effective way for the identification of the helical edge states. The predicted signature is stabilized by the time-reversal symmetry so that it is robust against disorder and does not require any fine adjustment of system. △ Less

Submitted 18 November, 2021; v1 submitted 10 December, 2020; originally announced December 2020.

Comments: 8 pages and 7 figures

Journal ref: CHIN. PHYS. LETT. Vol. 38, No. 11 (2021) 110302

Discovery of carbon-based strongest and hardest amorphous material

Authors: Shuangshuang Zhang, Zihe Li, Kun Luo, Julong He, Yufei Gao, Alexander V. Soldatov, Vicente Benavides, Kaiyuan Shi, Anmin Nie, Bin Zhang, Wentao Hu, Mengdong Ma, Yong Liu, Bin Wen, Guoying Gao, Bing Liu, Yang Zhang, Dongli Yu, Xiang-Feng Zhou, Zhisheng Zhao, Bo Xu, Lei Su, Guoqiang Yang, Olga P. Chernogorova, Yongjun Tian

Abstract: Carbon is likely the most fascinating element of the periodic table because of the diversity of its allotropes stemming from its variable (sp, sp2, and sp3) bonding motifs. Exploration of new forms of carbon has been an eternal theme of contemporary scientific research. Here we report on novel amorphous carbon phases containing high fraction of sp3 bonded atoms recovered after compressing fulleren… ▽ More Carbon is likely the most fascinating element of the periodic table because of the diversity of its allotropes stemming from its variable (sp, sp2, and sp3) bonding motifs. Exploration of new forms of carbon has been an eternal theme of contemporary scientific research. Here we report on novel amorphous carbon phases containing high fraction of sp3 bonded atoms recovered after compressing fullerene C60 to previously unexplored high pressure and temperature. The synthesized carbons are the hardest and strongest amorphous materials known to date, capable of scratching diamond crystal and approaching its strength which is evidenced by complimentary mechanical tests. Photoluminescence and absorption spectra of the materials demonstrate they are semiconductors with tunable bandgaps in the range of 1.5-2.2 eV, comparable to that of amorphous silicon. A remarkable combination of the outstanding mechanical and electronic properties makes this class of amorphous carbons an excellent candidate for photovoltaic applications demanding ultrahigh strength and wear resistance. △ Less

Submitted 25 June, 2021; v1 submitted 30 November, 2020; originally announced November 2020.

Comments: 40 pages, 17 figures

Report number: nwab140

Journal ref: National Science Review, 2021

Local pressure for inhomogeneous fluids

Authors: James Dufty, Jeffrey Wrighton, Kai Luo

Abstract: Definitions for a local pressure in an inhomogeneous fluid are considered for both equilibrium and local equilibrium states. Thermodynamic and mechanical (hydrodynamic) contexts are reconciled. Remaining problems and uncertainties are discussed. Definitions for a local pressure in an inhomogeneous fluid are considered for both equilibrium and local equilibrium states. Thermodynamic and mechanical (hydrodynamic) contexts are reconciled. Remaining problems and uncertainties are discussed. △ Less

Submitted 26 August, 2020; originally announced August 2020.

Comments: 25 pages, accepted by the AIChE Journal

Halogenated MXenes with Electrochemically Active Terminals for High Performance Zinc Ion Batteries

Authors: Mian Li, XinLiang Li, Guifang Qin, Kan Luo, Jun Lu, Youbing Li, Guojin Liang, Zhaodong Huang, Lars Hultman, Per Eklund, Per O. A. Persson, Shiyu Du, Zhifang Chai, Chunyi Zhi, Qing Huang

Abstract: The class of two-dimensional metal carbides and nitrides known as MXenes offer a distinct manner of property tailoring for a wide range of applications. The ability to tune the surface chemistry for expanding the property space of MXenes is thus an important topic, although experimental exploration of new surface terminals remains a challenge. Here, we synthesized Ti3C2 MXene with unitary, binary… ▽ More The class of two-dimensional metal carbides and nitrides known as MXenes offer a distinct manner of property tailoring for a wide range of applications. The ability to tune the surface chemistry for expanding the property space of MXenes is thus an important topic, although experimental exploration of new surface terminals remains a challenge. Here, we synthesized Ti3C2 MXene with unitary, binary and ternary halogen terminals, e.g. -Cl, -Br, -I, -BrI and -ClBrI, to investigate the effect of surface chemistry on the properties of MXenes. The electrochemical activity of Br and I element result in the extraordinary electrochemical performance of the MXenes as cathodes for aqueous zinc ion batteries. The -Br and -I containing MXenes, e.g. Ti3C2Br2 and Ti3C2I2, exhibit distinct discharge platforms with considerable capacities of 97.6 mAh g-1 and 135 mAh g-1. Ti3C2(BrI) and Ti3C2(ClBrI) exhibit dual discharge platforms with capacities of 117.2 mAh g-1 and 106.7 mAh g-1. In contrast, the previously discovered MXenes Ti3C2Cl2 and Ti3C2(OF) exhibit no discharge platforms, and only ~50% of capacities and energy densities of Ti3C2Br2. These results emphasize the effectiveness of the Lewis-acidic-melt etching route for tuning the surface chemistry of MXenes, and also show promise for expanding the MXene family towards various applications. △ Less

Submitted 16 June, 2020; originally announced June 2020.

Generalized hydrodynamics revisited

Authors: James Dufty, Kai Luo, Jeffrey Wrighton

Abstract: During the past decade a number of attempts to formulate a continuum description of complex states of matter have been proposed to circumvent more cumbersome many-body and simulation methods. Typically these have been quantum systems (e.g., electrons) and the resulting phenomenologies collectively often called "quantum hydrodynamics". However, there is extensive work from the past based in non-equ… ▽ More During the past decade a number of attempts to formulate a continuum description of complex states of matter have been proposed to circumvent more cumbersome many-body and simulation methods. Typically these have been quantum systems (e.g., electrons) and the resulting phenomenologies collectively often called "quantum hydrodynamics". However, there is extensive work from the past based in non-equilibrium statistical mechanics on the microscopic origins of macroscopic continuum dynamics that has not been exploited in this context. Although formally exact, its original target was the derivation of Navier-Stokes hydrodynamics for slowly varying states in space and time. The objective here is to revisit that work for the present interest in complex quantum states - possible strong degeneracy, strong coupling, and all space-time scales. The result is an exact representation of generalized hydrodynamics suitable for introducing controlled approximations for diverse specific cases, and for critiquing existing work. △ Less

Submitted 19 February, 2020; v1 submitted 4 February, 2020; originally announced February 2020.

Comments: Supplemental material is also included

Journal ref: Phys. Rev. Research 2, 023036 (2020)

Towards accurate orbital-free simulations: a generalized gradient approximation for the non-interacting free energy density functional

Authors: Kai Luo, Valentin V. Karasiev, S. B. Trickey

Abstract: For orbital-free {\it ab initio} molecular dynamics, especially on systems in extreme thermodynamic conditions, we provide the first pseudo-potential-adapted generalized gradient approximation (GGA) functional for the non-interacting free energy. This is achieved by systematic finite-temperature extension of our recent LKT ground state non-interacting kinetic energy GGA functional (Phys. Rev. B \t… ▽ More For orbital-free {\it ab initio} molecular dynamics, especially on systems in extreme thermodynamic conditions, we provide the first pseudo-potential-adapted generalized gradient approximation (GGA) functional for the non-interacting free energy. This is achieved by systematic finite-temperature extension of our recent LKT ground state non-interacting kinetic energy GGA functional (Phys. Rev. B \textbf{98}, 041111(R) (2018)). We test the performance of the new functional first via static lattice calculations on crystalline aluminum and silicon. Then we compare deuterium equation of state results against both path-integral Monte Carlo and conventional (orbital-dependent) Kohn-Sham results. The new functional, denoted LKTF, outperforms the previous best semi-local free energy functional, VT84F (Phys.\ Rev.\ B \textbf{88}, 161108(R) (2013)), and provides modestly faster simulations. We also discuss subtleties of identification of kinetic and entropic contributions to non-interacting free-energy functionals obtained by extension from ground state orbital-free kinetic energy functionals. △ Less

Submitted 28 January, 2020; originally announced January 2020.

Journal ref: Phys. Rev. B 101, 075116 (2020)

Three metallic BN polymorphs: 1D multi-threaded conduction in 3D network

Authors: Mei Xiong, Zhibin Gao, Kun Luo, FeiFei Ling, YuFei Gao, Chong Chen, Dongli Yu, Zhisheng Zhao, Shizhong Wei

Abstract: In this paper, three novel metallic sp2/sp3 -hybridized Boron Nitride (BN) polymorphs are proposed by first-principles calculations. One of them, named as tP-BN, is predicted based on the evolutionary particle swarm structural search. tP-BN is constructed by two interlocked rings forming a tube-like 3D network. The stability and band structure calculations show tP-BN is metastable and metallic at… ▽ More In this paper, three novel metallic sp2/sp3 -hybridized Boron Nitride (BN) polymorphs are proposed by first-principles calculations. One of them, named as tP-BN, is predicted based on the evolutionary particle swarm structural search. tP-BN is constructed by two interlocked rings forming a tube-like 3D network. The stability and band structure calculations show tP-BN is metastable and metallic at zero pressure. Calculations for the density of states and electron orbits confirm that the metallicity originates from the sp2 -hybridized B and N atoms, and forming 1D linear conductive channels in the 3D network. According to the relationship between the atomic structure and electronic properties, another two 3D metastable metallic sp2/sp3 -hybridized BN structures are constructed manually. Electronic properties calculations show that both of these structures have 1D conductive channel along different axes. The polymorphs predicted in this study enrich the structures and provide a different picture of the conductive mechanism of BN compounds. △ Less

Submitted 11 December, 2019; originally announced December 2019.

Comments: 21 pages, 7 figures

Small strain induced large piezoelectric coefficient in $α$-AsP monolayer

Authors: San-Dong Guo, Xiao-Shu Guo, Ya-Ying Zhang, Kui Luo

Abstract: Strain engineering can effectively tune the electronic, topological and piezoelectric properties of materials. In this work, the small strain (-4\% to 4\%) effects on piezoelectric properties of $α$-AsP monolayer are studied by density functional theory (DFT). The piezoelectric stress tensors $e_{ij}$ and elastic stiffness tensors $C_{ij}$ are reported by using density functional perturbation theo… ▽ More Strain engineering can effectively tune the electronic, topological and piezoelectric properties of materials. In this work, the small strain (-4\% to 4\%) effects on piezoelectric properties of $α$-AsP monolayer are studied by density functional theory (DFT). The piezoelectric stress tensors $e_{ij}$ and elastic stiffness tensors $C_{ij}$ are reported by using density functional perturbation theory (DFPT) and finite difference method (FDM). It is found that the Young's modulus of $α$-AsP monolayer shows very strong anisotropy, and the armchair direction is very softer than zigzag direction, which provides possibility for tuning easily piezoelectric coefficients along the armchair direction. In considered strain range, uniaxial compressive (tensile) strain along the armchair (zigzag) direction is found to raise observably both the $e_{22}$ and $d_{22}$ (absolute value). In fact, both compressive strain along the armchair direction and tensile strain along the zigzag direction essentially reduce the lattice constants along the armchair direction, which can enhance the piezoelectric coefficients. The $e_{ij}$ of $β$-AsP monolayer as a function of strain is also studied to illustrate the importance of particular puckered structure of $α$-AsP in enhancing the piezoelectric coefficients. A classic SnSe monolayer with puckered structure is used to further declare that small strain along the armchair direction can effectively improve the piezoelectric coefficients. For example, the $d_{22}$ of SnSe monolayer at -3.5\% strain is up to 628.8 pm/V from unstrained 175.3 pm/V. For SnSe monolayer, a large peak is observed for $e_{22}$, which is due to a structural phase transition. For $e_{16}$ of SnSe monolayer, a large peak is also observed due to the cross of lattice constants $a$ along the zigzag direction and $b$ along the armchair direction. △ Less

Submitted 19 October, 2019; originally announced October 2019.

Comments: 8 pages,8 figures

Discrete fluidization of dense monodisperse emulsions in neutral wetting microchannels

Authors: Linlin Fei, Andrea Scagliarini, Kai H. Luo, Sauro Succi

Abstract: The rheology of pressure-driven flows of two-dimensional dense monodisperse emulsions in neutral wetting microchannels is investigated by means of mesoscopic lattice simulations, capable of handling large collections of droplets, in the order of several hundreds. The simulations reveal that the fluidization of the emulsion proceeds through a sequence of discrete steps, characterized by yielding ev… ▽ More The rheology of pressure-driven flows of two-dimensional dense monodisperse emulsions in neutral wetting microchannels is investigated by means of mesoscopic lattice simulations, capable of handling large collections of droplets, in the order of several hundreds. The simulations reveal that the fluidization of the emulsion proceeds through a sequence of discrete steps, characterized by yielding events whereby layers of droplets start rolling over each other, thus leading to sudden drops of the relative effective viscosity. It is shown that such discrete fluidization is robust against loss of confinement, namely it persists also in the regime of small ratios of the droplet diameter over the microchannel width. We also develop a simple phenomenological model which predicts a linear relation between the relative effective viscosity of the emulsion and the product of the confinement parameter (global size of the device over droplet radius) and the viscosity ratio between the disperse and continuous phases. The model shows excellent agreement with the numerical simulations. The present work offers new insights to enable the design of microfluidic scaffolds for tissue engineering applications and paves the way to detailed rheological studies of soft-glassy materials in complex geometries. △ Less

Submitted 30 November, 2019; v1 submitted 4 October, 2019; originally announced October 2019.

Comments: 8 pages, 8 figures

Journal ref: Soft Matter, 2019

Tunable anisotropic behaviors in phosphorene under periodic potentials in arbitrary directions

Authors: Xiaojing Li, Wen Yang, Kun Luo, Zhenhua Wu

Abstract: We investigate theoretically the anisotropic electronic and optical behaviors of a monolayer black phosphorus (phosphorene) modulated by periodic potential superlattices in arbitrary directions. We demonstrate that different strength and orientation of the phosphorene potential superlattice can give rise to distinct energy spectra, i.e., tuning the intrinsic electronic anisotropy. Accordingly, the… ▽ More We investigate theoretically the anisotropic electronic and optical behaviors of a monolayer black phosphorus (phosphorene) modulated by periodic potential superlattices in arbitrary directions. We demonstrate that different strength and orientation of the phosphorene potential superlattice can give rise to distinct energy spectra, i.e., tuning the intrinsic electronic anisotropy. Accordingly, the anisotropic effective mass, and optical absorption modulated by superlattice strength and orientation are addressed systematically. This feature enables tuning capability more than one order of magnitude in the optical absorption spectrum. Our findings should be useful in building phosphorene optical and (opto)electronic devices by applying external potential superlattice. △ Less

Submitted 14 December, 2019; v1 submitted 9 August, 2019; originally announced August 2019.

Comments: 5 pages, 5 figures. arXiv admin note: text overlap with arXiv:1711.02426

Journal ref: Nanotechnology 2019

Synthesis of MAX Phases Nb2CuC and Ti2(Al0.1Cu0.9)N by A-site Replacement Reaction in Molten Salts

Authors: Haoming Ding, Youbing Li, Jun Lu, Kan Luo, Ke Chen, Mian Li, Per O. A. Persson, Lars Hultman, Per Eklund, Shiyu Du, Zhengren Huang, Zhifang Chai, Hongjie Wang, Ping Huang, Qing Huang

Abstract: New MAX phases Ti2(AlxCu1-x)N and Nb2CuC were synthesized by A-site replacement by reacting Ti2AlN and Nb2AlC, respectively, with CuCl2 or CuI molten salt. X-ray diffraction, scanning electron microscopy, and atomically-resolved scanning transmission electron microscopy showed complete A-site replacement in Nb2AlC, which lead to formation of Nb2CuC. However, the replacement of Al in Ti2AlN phase w… ▽ More New MAX phases Ti2(AlxCu1-x)N and Nb2CuC were synthesized by A-site replacement by reacting Ti2AlN and Nb2AlC, respectively, with CuCl2 or CuI molten salt. X-ray diffraction, scanning electron microscopy, and atomically-resolved scanning transmission electron microscopy showed complete A-site replacement in Nb2AlC, which lead to formation of Nb2CuC. However, the replacement of Al in Ti2AlN phase was only close to complete at Ti2(Al0.1Cu0.9)N. Density-functional theory calculations corroborated the structural stability of Nb2CuC and Ti2CuN phases. Moreover, the calculated cleavage energy in these Cu-containing MAX phases are weaker than in their Al-containing counterparts, indicating that they are precursor candidates for MXene derivation. △ Less

Submitted 23 July, 2019; v1 submitted 19 July, 2019; originally announced July 2019.

Comments: author name corrected

Observation of multiple types of topological fermions in PdBiSe

Authors: B. Q. Lv, Z. -L. Feng, J. -Z. Zhao, Noah F. Q. Yuan, A. Zong, K. F. Luo, R. Yu, Y. -B. Huang, V. N. Strocov, A. Chikina, A. A. Soluyanov, N. Gedik, Y. -G. Shi, T. Qian, H. Ding

Abstract: Topological semimetals with different types of band crossings provide a rich platform to realize novel fermionic excitations, known as topological fermions. In particular, some fermionic excitations can be direct analogues of elementary particles in quantum field theory when both obey the same laws of physics in the low-energy limit. Examples include Dirac and Weyl fermions, whose solid-state real… ▽ More Topological semimetals with different types of band crossings provide a rich platform to realize novel fermionic excitations, known as topological fermions. In particular, some fermionic excitations can be direct analogues of elementary particles in quantum field theory when both obey the same laws of physics in the low-energy limit. Examples include Dirac and Weyl fermions, whose solid-state realizations have provided new insights into long-sought phenomena in high-energy physics. Recently, theorists predicted new types of fermionic excitations in condensed-matter systems without any high-energy counterpart, and their existence is protected by crystalline symmetries. By studying the topology of the electronic structure in PdBiSe using density functional theory calculations and bulk-sensitive soft X-ray angle-resolved photoemission spectroscopy, we demonstrate a coexistence of four different types of topological fermions: Weyl, Rarita-Schwinger-Weyl, double class-II three-component, and charge-2 fourfold fermions. Our discovery provides a remarkable platform to realize multiple novel fermions in a single solid, charting the way forward to studies of their potentially exotic properties as well as their interplay. △ Less

Submitted 27 May, 2019; originally announced May 2019.

Topological phases in pyrochlore thallium niobate Tl$_2$Nb$_2$O$_{6+x}$

Authors: Wei Zhang, Kaifa Luo, Zhendong Chen, Ziming Zhu, Rui Yu, Chen Fang, Hongming Weng

Abstract: The discovery of new topological electronic materials brings a chance to uncover novel physics and plays a key role in observing and controlling various intriguing phenomena. Up to now, many materials have been theoretically proposed and experimentally proved to host different kinds of topological states. Unfortunately, there is little convincing experimental evidence for the existence of topologi… ▽ More The discovery of new topological electronic materials brings a chance to uncover novel physics and plays a key role in observing and controlling various intriguing phenomena. Up to now, many materials have been theoretically proposed and experimentally proved to host different kinds of topological states. Unfortunately, there is little convincing experimental evidence for the existence of topological oxides. The reason is that oxidation of oxygen leads to ionic crystal in general and makes band inversion unlikely. In addition, the realization of different topological states in a single material is quite difficult, but strongly needed for exploring topological phase transitions. In this work, using first-principles calculations and symmetry analysis, we propose that the experimentally tunable continuous solid solution of oxygen in pyrochlore Tl$_2$Nb$_2$O$_{6+x}$ ($ 0\leq x \leq 1.0$) leads to various topological states. Topological insulator, Dirac semimetal and triply degenerate nodal point semimetal can be realized in it via changing the oxygen content and/or tuning the crystalline symmetries. When $x = 1$, it is a semimetal with quadratic band touching point at Fermi level. It transits into a Dirac semimetal or a topological insulator depending on the in-plane strain. When $x = 0.5$, the inversion symmetry is spontaneously broken in Tl$_2$Nb$_2$O$_{6.5}$, leading to triply degenerate nodal points. When $x = 0$, Tl$_2$Nb$_2$O$_6$ becomes a trivial insulator with a narrow band gap. These topological phase transitions driven by solid solution of oxygen are unique and physically plausible due to the variation of valence state of $Tl^{1+}$ and $Tl^{3+}$. This topological oxide will be promising for studying correlation induced topological states and potential applications. △ Less

Submitted 14 December, 2021; v1 submitted 3 March, 2019; originally announced March 2019.

Comments: 20 pages, 4 figures

Journal ref: npj Computational Materials 2019, 5, 105

Element Replacement Approach by Reaction with Lewis Acidic Molten Salts to Synthesize Nanolaminated MAX Phases and MXenes

Authors: Mian Li, Jun Lu, Kan Luo, Youbing Li, Keke Chang, Ke Chen, Jie Zhou, Johanna Rosen, Lars Hultman, Per Eklund, Per O. Å. Persson, Shiyu Du, Zhifang Chai, Zhengren Huang, Qing Huang

Abstract: Nanolaminated materials are important because of their exceptional properties and wide range of applications. Here, we demonstrate a general approach to synthesize a series of Zn-based MAX phases and Cl-terminated MXenes originating from the replacement reaction between the MAX phase and the late transition metal halides. The approach is a top-down route that enables the late transitional element… ▽ More Nanolaminated materials are important because of their exceptional properties and wide range of applications. Here, we demonstrate a general approach to synthesize a series of Zn-based MAX phases and Cl-terminated MXenes originating from the replacement reaction between the MAX phase and the late transition metal halides. The approach is a top-down route that enables the late transitional element atom (Zn in the present case) to occupy the A site in the pre-existing MAX phase structure. Using this replacement reaction between Zn element from molten ZnCl2 and Al element in MAX phase precursors (Ti3AlC2, Ti2AlC, Ti2AlN, and V2AlC), novel MAX phases Ti3ZnC2, Ti2ZnC, Ti2ZnN, and V2ZnC were synthesized. When employing excess ZnCl2, Cl terminated MXenes (such as Ti3C2Cl2 and Ti2CCl2) were derived by a subsequent exfoliation of Ti3ZnC2 and Ti2ZnC due to the strong Lewis acidity of molten ZnCl2. These results indicate that A-site element replacement in traditional MAX phases by late transition metal halides opens the door to explore MAX phases that are not thermodynamically stable at high temperature and would be difficult to synthesize through the commonly employed powder metallurgy approach. In addition, this is the first time that exclusively Cl-terminated MXenes were obtained, and the etching effect of Lewis acid in molten salts provides a green and viable route to prepare MXenes through an HF-free chemical approach. △ Less

Submitted 15 March, 2019; v1 submitted 15 January, 2019; originally announced January 2019.

Comments: Title changed; experimental section and discussion revised

Journal ref: J. Am. Chem. Soc. 2019, 141, 11, 4730-4737

Nodal Manifolds Bounded by Exceptional Points on Non-Hermitian Honeycomb Lattices and Electrical-Circuit Realizations

Authors: Kaifa Luo, Jiajin Feng, Y. X. Zhao, Rui Yu

Abstract: Topological semimetals feature a diversity of nodal manifolds including nodal points, various nodal lines and surfaces, and recently novel quantum states in non-Hermitian systems have been arousing widespread research interests. In contrast to Hermitian systems whose bulk nodal points must form closed manifolds, it is fascinating to find that for non-Hermitian systems exotic nodal manifolds can be… ▽ More Topological semimetals feature a diversity of nodal manifolds including nodal points, various nodal lines and surfaces, and recently novel quantum states in non-Hermitian systems have been arousing widespread research interests. In contrast to Hermitian systems whose bulk nodal points must form closed manifolds, it is fascinating to find that for non-Hermitian systems exotic nodal manifolds can be bounded by exceptional points in the bulk band structure. Such exceptional points, at which energy bands coalesce with band conservation violated, are iconic for non-Hermitian systems. In this work, we show that a variety of nodal lines and drumheads with exceptional boundary can be realized on 2D and 3D honeycomb lattices through natural and physically feasible non-Hermitian processes. The bulk nodal Fermi-arc and drumhead states, although is analogous to, but should be essentially distinguished from the surface counterpart of Weyl and nodal-line semimetals, respectively, for which surface nodal-manifold bands eventually sink into bulk bands. Then we rigorously examine the bulk-boundary correspondence of these exotic states with open boundary condition, and find that these exotic bulk states are thereby undermined, showing the essential importance of periodic boundary condition for the existence of these exotic states. As periodic boundary condition is non-realistic for real materials, we furthermore propose a practically feasible electrical-circuit simulation, with non-Hermitian devices implemented by ordinary operational amplifiers, to emulate these extraordinary states. △ Less

Submitted 22 October, 2018; originally announced October 2018.

Large Fermi-arc and robust Weyl semimetal phase in Ag$_2$S

Authors: Zhenwei Wang, Kaifa Luo, Jianzhou Zhao, Rui Yu

Abstract: Three-dimensional Dirac and Weyl semimetals have attracted widespread interest in condensed matter physics and material science. Here, based on first-principles calculations and symmetry analysis, we report that Ag$_2$S with P2$_1$2$_1$2$_1$ symmetry is a topological Dirac semimetal in the absence of spin-orbit coupling (SOC). Every Dirac points are composed of two Weyl points with the same chiral… ▽ More Three-dimensional Dirac and Weyl semimetals have attracted widespread interest in condensed matter physics and material science. Here, based on first-principles calculations and symmetry analysis, we report that Ag$_2$S with P2$_1$2$_1$2$_1$ symmetry is a topological Dirac semimetal in the absence of spin-orbit coupling (SOC). Every Dirac points are composed of two Weyl points with the same chirality overlapping in the momentum space. After taking the SOC into consideration, each Dirac point is split into two Weyl points. The Weyl points with the opposite chirality are far from each other in the momentum space. Therefore, the Weyl pairs are not easy to annihilate and robust in the Ag$_2$S compound, which also lead to long Fermi-arcs on material surface. The robustness of the Weyl points against the strain is discussed. △ Less

Submitted 10 September, 2018; originally announced September 2018.

Journal ref: Phys. Rev. B 100, 205117 (2019)

Mesoscopic model for soft flowing systems with tunable viscosity ratio

Authors: Linlin Fei, Andrea Scagliarini, Andrea Montessori, Marco Lauricella, Sauro Succi, Kai H. Luo

Abstract: We propose a mesoscopic model of binary fluid mixtures with tunable viscosity ratio based on a two-range pseudo-potential lattice Boltzmann method, for the simulation of soft flowing systems. In addition to the short range repulsive interaction between species in the classical single-range model, a competing mechanism between the short-range attractive and mid-range repulsive interactions is impos… ▽ More We propose a mesoscopic model of binary fluid mixtures with tunable viscosity ratio based on a two-range pseudo-potential lattice Boltzmann method, for the simulation of soft flowing systems. In addition to the short range repulsive interaction between species in the classical single-range model, a competing mechanism between the short-range attractive and mid-range repulsive interactions is imposed within each species. Besides extending the range of attainable surface tension as compared with the single-range model, the proposed scheme is also shown to achieve a positive disjoining pressure, independently of the viscosity ratio. The latter property is crucial for many microfluidic applications involving a collection of disperse droplets with a different viscosity from the continuum phase. As a preliminary application, the relative effective viscosity of a pressure-driven emulsion in a planar channel is computed. △ Less

Submitted 19 October, 2020; v1 submitted 18 June, 2018; originally announced June 2018.

Comments: 16 pages, 15 figures

Report number: PHYSICAL REVIEW FLUIDS 3, 104304 (2018)

Journal ref: Phys. Rev. Fluids 3, 104304 (2018)

Strong and Tunable Spin Lifetime Anisotropy in Dual-Gated Bilayer Graphene

Authors: Jinsong Xu, Tiancong Zhu, Yunqiu Kelly Luo, Yuan-Ming Lu, Roland K. Kawakami

Abstract: We report the discovery of a strong and tunable spin lifetime anisotropy with excellent spin lifetimes up to 7.8 ns in dual-gated bilayer graphene. Remarkably, this realizes the manipulation of spins in graphene by electrically-controlled spin-orbit fields, which is unexpected due to graphene's weak intrinsic spin-orbit coupling. We utilize both the in-plane magnetic field Hanle precession and obl… ▽ More We report the discovery of a strong and tunable spin lifetime anisotropy with excellent spin lifetimes up to 7.8 ns in dual-gated bilayer graphene. Remarkably, this realizes the manipulation of spins in graphene by electrically-controlled spin-orbit fields, which is unexpected due to graphene's weak intrinsic spin-orbit coupling. We utilize both the in-plane magnetic field Hanle precession and oblique Hanle precession measurements to directly compare the lifetimes of out-of-plane vs. in-plane spins. We find that near the charge neutrality point, the application of a perpendicular electric field opens a band gap and generates an out-of-plane spin-orbit field that stabilizes out-of-plane spins against spin relaxation, leading to a large spin lifetime anisotropy. This intriguing behavior occurs because of the unique spin-valley coupled band structure of bilayer graphene. Our results demonstrate the potential for highly tunable spintronic devices based on dual-gated 2D materials. △ Less

Submitted 6 June, 2018; originally announced June 2018.

Comments: 18 pages, 7 figures

Journal ref: Phys. Rev. Lett. 121, 127703 (2018)

Density Response from Kinetic Theory and Time Dependent Density Functional Theory for Matter Under Extreme Conditions

Authors: James Dufty, Kai Luo, S. B. Trickey

Abstract: The density linear response function for an inhomogeneous system of electrons in equilibrium with an array of fixed ions is considered. Two routes to its evaluation for extreme conditions (e.g., warm dense matter) are considered. The first is from a recently developed short-time kinetic equation; the second is from time-dependent density functional theory (tdDFT). The result from the latter approa… ▽ More The density linear response function for an inhomogeneous system of electrons in equilibrium with an array of fixed ions is considered. Two routes to its evaluation for extreme conditions (e.g., warm dense matter) are considered. The first is from a recently developed short-time kinetic equation; the second is from time-dependent density functional theory (tdDFT). The result from the latter approach agrees with that from kinetic theory in the "adiabatic approximation", providing support and context for each. Both provide a connection to the phenomenological Kubo-Greenwood method for calculating transport properties. A brief proof of the van Leeuwen theorem (an essential underpinning of tdDFT) extended to the mixed states of equilibrium ensembles is given. △ Less

Submitted 28 August, 2018; v1 submitted 16 May, 2018; originally announced May 2018.

Comments: 21 pages

Journal ref: Phys. Rev. E 98, 033203 (2018)

Proposal for detecting nodal-line semimetal surface-states with resonant spin-flipped reflection

Authors: Wei Chen, Kun Luo, Lin Li, Oded Zilberberg

Abstract: Topological nodal-line semimetals are predicted to exhibit unique drumhead-like surface states (DSS). Yet, a direct detection of such states remains a challenge. Here, we propose spin-resolved transport in a junction between a normal metal and a spin-orbit coupled nodal-line semimetal as the mechanism for their detection. Specifically, we find that in such a device, the DSS induce resonant spin-fl… ▽ More Topological nodal-line semimetals are predicted to exhibit unique drumhead-like surface states (DSS). Yet, a direct detection of such states remains a challenge. Here, we propose spin-resolved transport in a junction between a normal metal and a spin-orbit coupled nodal-line semimetal as the mechanism for their detection. Specifically, we find that in such a device, the DSS induce resonant spin-flipped reflection. This effect can be probed by both vertical spin transport and lateral charge transport between anti-parallel magnetic terminals. In the tunneling limit of the junction, both spin and charge conductances exhibit a resonant peak around zero energy, providing a unique evidence of the DSS. This signature is robust to both dispersive DSS and interface disorder. Based on numerical calculations, we show that the scheme can be implemented in the topological semimetal HgCr$_2$Se$_4$. △ Less

Submitted 1 October, 2018; v1 submitted 31 January, 2018; originally announced January 2018.

Comments: 13 pages, 3 figures, including supplemental material, the version to be published in PRL

Journal ref: Phys. Rev. Lett. 121, 166802 (2018)

Topological nodal states in circuit lattice

Authors: Kaifa Luo, Rui Yu, Hongming Weng

Abstract: The search for artificial structure with tunable topological properties is an interesting research direction of today's topological physics. Here, we introduce a scheme to realize `topological semimetal states' with a three-dimensional periodic inductor-capacitor (LC) circuit lattice, where the topological nodal-line state and Weyl state can be achieved by tuning the parameters of inductors and ca… ▽ More The search for artificial structure with tunable topological properties is an interesting research direction of today's topological physics. Here, we introduce a scheme to realize `topological semimetal states' with a three-dimensional periodic inductor-capacitor (LC) circuit lattice, where the topological nodal-line state and Weyl state can be achieved by tuning the parameters of inductors and capacitors. A tight-binding-like model is derived to analyze the topological properties of the LC circuit lattice. The key characters of the topological states, such as the drumhead-like surface bands for nodal-line state and the Fermi-arc-like surface bands for Weyl state, are found in these systems. We also show that the Weyl points are stable with the fabrication errors of electric devices. △ Less

Submitted 11 May, 2018; v1 submitted 17 January, 2018; originally announced January 2018.

Comments: 4 figures

Journal ref: Research Volume 2018, Article ID 6793752