-
Magnetization and Hall effect studies on the pyrochlore iridate Nd2Ir2O7
Authors:
S. M. Disseler,
S. R. Giblin,
Chetan Dhital,
K. C. Lukas,
Stephen D. Wilson,
M. J. Graf
Abstract:
We present magnetization and Hall effect measurements on the pyrochlore iridate Nd2Ir2O7. Previous muon spin rotation measurements have shown that the system undergoes an unusual transition at T$_M$ = 110 K into a magnetic phase lacking long-range order, followed by a transition at T$_LRO$ = 6 K into a state with long-range magnetic order. We observe a small remnant magnetization when cycling thro…
▽ More
We present magnetization and Hall effect measurements on the pyrochlore iridate Nd2Ir2O7. Previous muon spin rotation measurements have shown that the system undergoes an unusual transition at T$_M$ = 110 K into a magnetic phase lacking long-range order, followed by a transition at T$_LRO$ = 6 K into a state with long-range magnetic order. We observe a small remnant magnetization when cycling through zero magnetic field at temperatures below T$_M$. Below T$_LRO$, this remnant magnetization increases sharply, and new hysteresis effects appear at a higher field B$_c$ = 2.5 T, while the Hall resistance develops a non-monotonic and hysteretic magnetic field dependence, with a maximum at B$_c$ and signatures of an anomalous Hall effect. The dependence on field sweep direction demonstrates a non-trivial transition into a magnetically ordered state with properties paralleling those of known spin-ice systems and suggests a spin reorientation transition across the metal insulator transition in the A-227 series.
△ Less
Submitted 21 December, 2012;
originally announced December 2012.
-
Phonon Drag Effect in Nanocomposite FeSb2
Authors:
Mani Pokharel,
Huaizhou Zhao,
Kevin Lukas,
Bogdan Mihaila,
Zhifeng Ren,
Cyril Opeil
Abstract:
We study the temperature dependence of thermoelectric transport properties of four FeSb2 nanocomposite samples with different grain sizes. The comparison of the single crystals and nanocomposites of varying grain size indicates the presence of substantial phonon drag effects in this system contributing to a large Seebeck coefficient at low temperature. As the grain size decreases, the increased ph…
▽ More
We study the temperature dependence of thermoelectric transport properties of four FeSb2 nanocomposite samples with different grain sizes. The comparison of the single crystals and nanocomposites of varying grain size indicates the presence of substantial phonon drag effects in this system contributing to a large Seebeck coefficient at low temperature. As the grain size decreases, the increased phonon scattering at the grain boundaries leads to a suppression of the phonon-drag effect, resulting in a much smaller peak value of the Seebeck coefficient in the nanostructured bulk materials. As a consequence, the ZT values are not improved significantly even though the thermal conductivity is drastically reduced.
△ Less
Submitted 10 October, 2012;
originally announced October 2012.
-
Thermal Stability of Thermoelectric Materials via In Situ Resistivity Measurements
Authors:
K. C. Lukas,
W. S. Liu,
Q. Jie,
Z. F. Ren,
C. P. Opeil
Abstract:
An experimental setup for determining the electrical resistivity of several types of thermoelectric materials over the temperature range 20 < T < 550 C is described in detail. One resistivity measurement during temperature cycling is also explained for Cu0.01Bi2Te2.7Se0.3 while a second measurement is made on Yb0.35Co4Sb12 as a function of time at 400 C. Both measurements confirm that the material…
▽ More
An experimental setup for determining the electrical resistivity of several types of thermoelectric materials over the temperature range 20 < T < 550 C is described in detail. One resistivity measurement during temperature cycling is also explained for Cu0.01Bi2Te2.7Se0.3 while a second measurement is made on Yb0.35Co4Sb12 as a function of time at 400 C. Both measurements confirm that the materials are thermally stable for the temperature range and time period measured. Measurements made during temperature cycling show an irreversible decrease in the electrical resistivity of Cu0.01Bi2Te2.7Se0.3 when the measuring temperature exceeds the pressing temperature. Several other possible uses of such a system include but are not limited to studying the effects of annealing and/or oxidation as a function of both temperature and time.
△ Less
Submitted 11 June, 2012;
originally announced June 2012.
-
Spin ordering and electronic texture in the bilayer iridate Sr$_3$Ir$_2$O$_7$
Authors:
Chetan Dhital,
Sovit Khadka,
Z. Yamani,
Clarina de la Cruz,
T. C. Hogan,
S. M. Disseler,
Mani Pokharel,
K. C. Lukas,
Wei Tian,
C. P. Opeil,
Ziqiang Wang,
Stephen D. Wilson
Abstract:
Through a neutron scattering, charge transport, and magnetization study, the correlated ground state in the bilayer iridium oxide Sr$_3$Ir$_2$O$_7$ is explored. Our combined results resolve scattering consistent with a high temperature magnetic phase that persists above 600 K, reorients at the previously defined $T_{AF}=280$ K, and coexists with an electronic ground state whose phase behavior sugg…
▽ More
Through a neutron scattering, charge transport, and magnetization study, the correlated ground state in the bilayer iridium oxide Sr$_3$Ir$_2$O$_7$ is explored. Our combined results resolve scattering consistent with a high temperature magnetic phase that persists above 600 K, reorients at the previously defined $T_{AF}=280$ K, and coexists with an electronic ground state whose phase behavior suggests the formation of a fluctuating charge or orbital phase that freezes below $T^{*}\approx70$ K. Our study provides a window into the emergence of multiple electronic order parameters near the boundary of the metal to insulator phase transition of the 5d $J_{eff}=1/2$ Mott phase.
△ Less
Submitted 9 September, 2012; v1 submitted 5 June, 2012;
originally announced June 2012.
-
Transport Properties of Ni, Co, Fe, Mn Doped Cu0.01Bi2Te2.7Se0.3 for Thermoelectric Device Applications
Authors:
Kevin C. Lukas,
Weishu Liu,
Zhifeng Ren,
Cyril P. Opeil
Abstract:
Bi2Te3 based thermoelectric devices typically use a nickel layer as a diffusion barrier to block the diffusion of solder or copper atoms from the electrode into the thermoelectric material. Previous studies have shown degradation in the efficiency of these thermoelectric devices may be due to the diffusion of the barrier layer into the thermoelectric material. In this work Ni, Co, Fe, and Mn are i…
▽ More
Bi2Te3 based thermoelectric devices typically use a nickel layer as a diffusion barrier to block the diffusion of solder or copper atoms from the electrode into the thermoelectric material. Previous studies have shown degradation in the efficiency of these thermoelectric devices may be due to the diffusion of the barrier layer into the thermoelectric material. In this work Ni, Co, Fe, and Mn are intentionally doped into Cu0.01Bi2Te2.7Se0.3 in order to understand their effects on the thermoelectric material. Thermoelectric transport properties including the Seebeck coefficient, thermal conductivity, electrical resistivity, carrier concentration, and carrier mobility of Cu0.01Bi2Te2.7Se0.3 doped with 2 atomic percent M (M=Ni, Co, Fe, Mn) as Cu0.01Bi2Te2.7Se0.3M0.02, are studied in a temperature range of 5-525 K.
△ Less
Submitted 29 May, 2012;
originally announced May 2012.
-
Thermoelectric Properties of Ho-doped Bi1-xSbx
Authors:
K. C. Lukas,
G. Joshi,
K. Modic,
Z. F. Ren,
C. P. Opeil
Abstract:
The Seebeck coefficients, electrical resistivities, total thermal conductivities, and magnetization are reported for temperatures between 5 and 350 K for n-type Bi0.88Sb0.12 nano-composite alloys made by Ho-doping at the 0, 1 and 3% atomic levels. The alloys were prepared using a dc hot-pressing method, and are shown to be single phase for both Ho contents with grain sizes on the average of 900 nm…
▽ More
The Seebeck coefficients, electrical resistivities, total thermal conductivities, and magnetization are reported for temperatures between 5 and 350 K for n-type Bi0.88Sb0.12 nano-composite alloys made by Ho-doping at the 0, 1 and 3% atomic levels. The alloys were prepared using a dc hot-pressing method, and are shown to be single phase for both Ho contents with grain sizes on the average of 900 nm. We find the parent compound has a maximum of ZT = 0.28 at 231 K, while doping 1% Ho increases the maximum ZT to 0.31 at 221 K and the 3% doped sample suppresses the maximum ZT = 0.24 at a temperature of 260 K.
△ Less
Submitted 30 January, 2012;
originally announced January 2012.
-
Experimental Determination of the Lorenz Number in Cu0.01Bi2Te2.7Se0.3 and Bi0.88Sb0.12
Authors:
K. C. Lukas,
W. S. Liu,
G. Joshi,
M. Zebarjadi,
M. S. Dresselhaus,
Z. F. Ren,
G. Chen,
C. P. Opeil
Abstract:
Nanostructuring has been shown to be an effective approach to reduce the lattice thermal conductivity and improve the thermoelectric figure of merit. Because the experimentally measured thermal conductivity includes contributions from both carriers and phonons, separating out the phonon contribution has been difficult and is mostly based on estimating the electronic contributions using the Wiedema…
▽ More
Nanostructuring has been shown to be an effective approach to reduce the lattice thermal conductivity and improve the thermoelectric figure of merit. Because the experimentally measured thermal conductivity includes contributions from both carriers and phonons, separating out the phonon contribution has been difficult and is mostly based on estimating the electronic contributions using the Wiedemann-Franz law. In this paper, an experimental method to directly measure electronic contributions to the thermal conductivity is presented and applied to Cu0.01Bi2Te2.7Se0.3, [Cu0.01Bi2Te2.7Se0.3]0.98Ni0.02, and Bi0.88Sb0.12. By measuring the thermal conductivity under magnetic field, electronic contributions to thermal conductivity can be extracted, leading to knowledge of the Lorenz number in thermoelectric materials.
△ Less
Submitted 24 January, 2012;
originally announced January 2012.