Showing 1–50 of 79 results for author: Luding, S

Bulk Modulus along Jamming Transition Lines of Bidisperse Granular Packings

Authors: Juan C. Petit, Nishant Kumar, Stefan Luding, Matthias Sperl

Abstract: We present 3D DEM simulations of bidisperse granular packings to investigate their jamming densities, $φ_J$, and dimensionless bulk moduli, $K$, as a function of the size ratio, $δ$, and the concentration of small particles, $X_{\mathrm S}$. We determine the partial and total bulk moduli for each packing and report the jamming transition diagram, i.e., the density or volume fraction marking both t… ▽ More We present 3D DEM simulations of bidisperse granular packings to investigate their jamming densities, $φ_J$, and dimensionless bulk moduli, $K$, as a function of the size ratio, $δ$, and the concentration of small particles, $X_{\mathrm S}$. We determine the partial and total bulk moduli for each packing and report the jamming transition diagram, i.e., the density or volume fraction marking both the first and second transitions of the system. At a large enough size difference, e.g., $δ\le 0.22$, $X^{*}_{\mathrm S}$ divides the diagram with most small particles either non-jammed or jammed jointly with large ones. We find that the bulk modulus $K$ jumps at $X^{*}_{\mathrm S}(δ= 0.15) \approx 0.21$, at the maximum jamming density, where both particle species mix most efficiently, while for $X_{\mathrm S} < X^{*}_{\mathrm S}$ $K$ is decoupled in two scenarios as a result of the first and second jamming transition. Along the second transition, $K$ rises relative to the values found at the first transition, however, is still small compared to $K$ at $X^{*}_{\mathrm S}$. While the first transition is sharp, the second is smooth, carried by small-large interactions, while the small-small contacts display a transition. This demonstrates that for low enough $δ$ and $X_{\mathrm S}$, the jamming of small particles indeed impacts the internal resistance of the system. Our new results will allow tuning the bulk modulus $K$ or other properties, such as the wave speed, by choosing specific sizes and concentrations based on a better understanding of whether small particles contribute to the jammed structure or not, and how the micromechanical structure behaves at either transition. △ Less

Submitted 17 November, 2022; v1 submitted 3 March, 2021; originally announced March 2021.

Comments: 15 pages, 18 figures

Journal ref: Phys. Rev. E (2022)

The influence of material properties and process parameters on the spreading process in additive manufacturing

Authors: Mohamad Yousef Shaheen, Anthony R. Thornton, Stefan Luding, Thomas Weinhart

Abstract: Laser powder bed fusion (LPBF) is an additive manufacturing (AM) technology. To achieve high product quality, the powder is best spread as a uniform, dense layer. The challenge for LPBF manufacturers is to develop a spreading process that can produce a consistent layer quality for the many powders used, which show considerable differences in spreadability. Therefore, we investigate the influence o… ▽ More Laser powder bed fusion (LPBF) is an additive manufacturing (AM) technology. To achieve high product quality, the powder is best spread as a uniform, dense layer. The challenge for LPBF manufacturers is to develop a spreading process that can produce a consistent layer quality for the many powders used, which show considerable differences in spreadability. Therefore, we investigate the influence of material properties, process parameters and the type of spreading tool on the layer quality. The discrete particle method is used to simulate the spreading process and to define metrics to evaluate the powder layer characteristics. We found that particle shape and surface roughness in terms of rolling resistance and interparticle sliding friction as well as particle cohesion all have a major (sometimes surprising) influence on the powder layer quality: more irregular shaped particles, rougher particle surfaces and/or higher interfacial cohesion usually, but not always, lead to worse spreadability. Our findings illustrate that there is a trade-off between material properties and process parameters. Increasing the spreading speed decreases layer quality for non- and weakly cohesive powders, but improves it for strongly cohesive ones. Using a counter-clockwise rotating roller as a spreading tool improves the powder layer quality compared to spreading with a blade. Finally, for both geometries, a unique correlation between the quality criteria uniformity and mass fraction is reported and some of the findings are related to size-segregation during spreading. △ Less

Submitted 16 July, 2020; originally announced July 2020.

Comments: 38 pages, 24 figures, 2 tables

Stretching the limits of dynamic and quasi-static flow testing on limestone powders

Authors: Hao Shi, Geoffroy Lumay, Stefan Luding

Abstract: Powders are a special class of granular matter due to the important role of cohesive forces. The flow behavior of powders depends on the flow states and stress and is therefore difficult to measure/quantify with only one experiment. In this study, the most commonly used characterization tests that cover a wide range of states are compared: (static, free surface) angle of repose, the (quasi-static,… ▽ More Powders are a special class of granular matter due to the important role of cohesive forces. The flow behavior of powders depends on the flow states and stress and is therefore difficult to measure/quantify with only one experiment. In this study, the most commonly used characterization tests that cover a wide range of states are compared: (static, free surface) angle of repose, the (quasi-static, confined) ring shear steady state angle of internal friction, and the (dynamic, free surface) rotating drum flow angle are considered for free flowing, moderately and strongly cohesive limestone powders. The free flowing powder gives good agreement among all different situations (devices), while the moderately and strongly cohesive powders behave more interestingly. Starting from the flow angle in the rotating drum and going slower, one can extrapolate to the limit of zero rotation rate, but then observes that the angle of repose measured from the heap is considerably larger, possibly due to its special history. When we stretch the ring shear test to its lowest confining stress limit, the steady state angle of internal friction of the cohesive powder coincides with the flow angle (at free surface) in the zero rotation rate limit. △ Less

Submitted 20 February, 2020; originally announced February 2020.

Comments: 27 pages, 9 figures, 1 table, LaTeX; 2nd reviewed version with minor changes (Powder Technology)

Additional transition line in jammed asymmetric bidisperse granular packings

Authors: Juan C. Petit, Nishant Kumar, Stefan Luding, Matthias Sperl

Abstract: We present numerical evidence for an additional discontinuous transition inside the jammed regime for an asymmetric bidisperse granular packing upon compression. This additional transition line separates jammed states with networks of predominantly large particles from jammed networks formed by both large and small particles, and the transition is indicated by a discontinuity in the number of part… ▽ More We present numerical evidence for an additional discontinuous transition inside the jammed regime for an asymmetric bidisperse granular packing upon compression. This additional transition line separates jammed states with networks of predominantly large particles from jammed networks formed by both large and small particles, and the transition is indicated by a discontinuity in the number of particles contributing to the jammed network. The additional transition line emerges from the curves of jamming transitions and terminates in an end-point where the discontinuity vanishes. The additional line is starting at a size ratio around $δ= 0.22$ and grows longer for smaller $δ$. For $δ\to 0$, the additional transition line approaches a limit that can be derived analytically. The observed jamming scenarios are reminiscent of glass-glass transitions found in colloidal glasses. △ Less

Submitted 6 February, 2020; originally announced February 2020.

Comments: 4 pages, 3 figures

Journal ref: Phys. Rev. Lett. 125, 215501 (2020)

Surface flow profiles for dry and wet granular materials by Particle Tracking Velocimetry; the effect of wall roughness

Authors: Sudeshna Roy, Bert J. Scheper, Harmen Polman, Anthony R. Thornton, Deepak R. Tunuguntla, Stefan Luding, Thomas Weinhart

Abstract: Two-dimensional Particle Tracking Velocimetry (PTV) is a promising technique to study the behaviour of granular flows. The aim is to experimentally determine the free surface width and position of the shear band from the velocity profile to validate simulations in a split-bottom shear cell geometry. The position and velocities of scattered tracer particles are tracked as they move with the bulk fl… ▽ More Two-dimensional Particle Tracking Velocimetry (PTV) is a promising technique to study the behaviour of granular flows. The aim is to experimentally determine the free surface width and position of the shear band from the velocity profile to validate simulations in a split-bottom shear cell geometry. The position and velocities of scattered tracer particles are tracked as they move with the bulk flow by analyzing images. We then use a new technique to extract the continuum velocity field, applying coarse-graining with the postprocessing toolbox MercuryCG on the discrete experimental PTV data. For intermediate filling heights, the dependence of the shear (or angular) velocity on the radial coordinate at the free surface is well fitted by an error function. From the error function, we get the width and the centre position of the shear band. We investigate the dependence of these shear band properties on filling height and rotation frequencies of the shear cell for dry glass beads for rough and smooth wall surfaces. For rough surfaces, the data agrees with the existing experimental results and theoretical scaling predictions. For smooth surfaces, particle-wall slippage is significant and the data deviates from the predictions. We further study the effect of cohesion on the shear band properties by using small amount of silicon oil and glycerol as interstitial liquids with the glass beads. While silicon oil does not lead to big changes, glycerol changes the shear band properties considerably. The shear band gets wider and is situated further inward with increasing liquid saturation, due to the correspondingly increasing trend of particles to stick together. △ Less

Submitted 5 January, 2019; originally announced January 2019.

Transition rates for slip-avalanches in soft athermal disks under quasi-static simple shear deformations

Authors: Kuniyasu Saitoh, Norihiro Oyama, Fumiko Ogushi, Stefan Luding

Abstract: We study slip-avalanches in two-dimensional soft athermal disks by quasi-static simulations of simple shear deformations. Sharp drops in shear stress, or slip-avalanches, are observed intermittently during steady state. Such the stress drop is caused by restructuring of the contact networks, accompanied by drastic changes of the interaction forces. The changes of the forces happen heterogeneously… ▽ More We study slip-avalanches in two-dimensional soft athermal disks by quasi-static simulations of simple shear deformations. Sharp drops in shear stress, or slip-avalanches, are observed intermittently during steady state. Such the stress drop is caused by restructuring of the contact networks, accompanied by drastic changes of the interaction forces. The changes of the forces happen heterogeneously in space, indicating that collective non-affine motions of the disks are most pronounced when slip-avalanches occur. We analyze and predict statistics for the force changes, by transition rates of the force and contact angle, where slip-avalanches are characterized by their wide power-law tails. We find that the transition rates are described as a q-Gaussian distribution regardless of the area fraction of the disks. Because the transition rates quantify structural changes of the force-chains, our findings are an important step towards a microscopic theory of slip-avalanches in the experimentally accessible quasi-static regime. △ Less

Submitted 27 September, 2018; originally announced September 2018.

Comments: 5 pages, 6 figures

Hydro-micromechanical modeling of wave propagation in saturated granular media

Authors: Hongyang Cheng, Stefan Luding, Nicolás Rivas, Jens Harting, Vanessa Magnanimo

Abstract: Biot's theory predicts the wave velocities of a saturated poroelastic granular medium from the elastic properties, density and geometry of its dry solid matrix and the pore fluid, neglecting the interaction between constituent particles and local flow. However, when the frequencies become high and the wavelengths comparable with particle size, the details of the microstructure start to play an imp… ▽ More Biot's theory predicts the wave velocities of a saturated poroelastic granular medium from the elastic properties, density and geometry of its dry solid matrix and the pore fluid, neglecting the interaction between constituent particles and local flow. However, when the frequencies become high and the wavelengths comparable with particle size, the details of the microstructure start to play an important role. Here, a novel hydro-micromechanical numerical model is proposed by coupling the lattice Boltzmann method (LBM) with the discrete element method (DEM. The model allows to investigate the details of the particle-fluid interaction during propagation of elastic waves While the DEM is tracking the translational and rotational motion of each solid particle, the LBM can resolve the pore-scale hydrodynamics. Solid and fluid phases are two-way coupled through momentum exchange. The coupling scheme is benchmarked with the terminal velocity of a single sphere settling in a fluid. To mimic a pressure wave entering a saturated granular medium, an oscillating pressure boundary condition on the fluid is implemented and benchmarked with one-dimensional wave equations. Using a face centered cubic structure, the effects of input waveforms and frequencies on the dispersion relations are investigated. Finally, the wave velocities at various effective confining pressures predicted by the numerical model are compared with with Biot's analytical solution, and a very good agreement is found. In addition to the pressure and shear waves, slow compressional waves are observed in the simulations, as predicted by Biot's theory. △ Less

Submitted 27 August, 2018; originally announced August 2018.

Comments: Manuscript submitted to International Journal for Numerical and Analytical Methods in Geomechanics

Elastic wave propagation in dry granular media: effects of probing characteristics and stress history

Authors: Hongyang Cheng, Stefan Luding, Kuniyasu Saitoh, Vanessa Magnanimo

Abstract: Elastic wave propagation provides a noninvasive way to probe granular materials. The discrete element method using particle configuration as input, allows a micromechanical interpretation on the acoustic response of a given granular system. This paper compares static and dynamic numerical probing methods, from which wave velocities are either deduced from elastic moduli or extracted from the time/… ▽ More Elastic wave propagation provides a noninvasive way to probe granular materials. The discrete element method using particle configuration as input, allows a micromechanical interpretation on the acoustic response of a given granular system. This paper compares static and dynamic numerical probing methods, from which wave velocities are either deduced from elastic moduli or extracted from the time/frequency-domain signals. The dependence of wave velocities on key characteristics, i.e., perturbation magnitude and direction for static probing, and maximum travel distance and inserted signals for dynamic probing, is investigated. It is found that processing the frequency-domain signals obtained from dynamic probing leads to reproducible wave velocities at all wavenumbers, irrespective of the perturbation characteristics, whereas the maximum travel distance and input signals for the time domain analysis have to be carefully chosen, so as to obtain the same long-wavelength limits as from the frequency domain. Static and dynamic probes are applied to calibrated representative volumes of glass beads, subjected to cyclic oedometric compression. Although the perturbation magnitudes are selected to reveal only the elastic moduli, the deduced wave velocities are consistently lower than the long-wavelength limits at various stress states, and thus sensitive to sample size. While the static probes investigate the influence of stress history on modulus degradation, dynamic probing offers insights about how dispersion relations evolve during cyclic compression. Interestingly, immediately after each load reversal the incremental behavior is reversibly elastoplastic, until it becomes truly elastic with further unload/reload. With repeating unload/reload, the P- or S-wave dispersion relations become increasingly scalable with respect to their long-wavelength limits. △ Less

Submitted 27 August, 2018; originally announced August 2018.

Comments: Manuscript submitted to International Journal of Solids and Structures

Rotational sound in disordered granular materials

Authors: Kuniyasu Saitoh, Rohit K. Shrivastava, Stefan Luding

Abstract: We employ numerical simulations to understand the evolution of elastic standing waves in disordered frictional disk systems, where the dispersion relations of rotational sound modes are analyzed in detail. As in the case of frictional particles on a lattice, the rotational modes exhibit an "optical-like" dispersion relation in the high frequency regime, representing a shoulder of the vibrational d… ▽ More We employ numerical simulations to understand the evolution of elastic standing waves in disordered frictional disk systems, where the dispersion relations of rotational sound modes are analyzed in detail. As in the case of frictional particles on a lattice, the rotational modes exhibit an "optical-like" dispersion relation in the high frequency regime, representing a shoulder of the vibrational density of states and fast oscillations of the autocorrelations of rotational velocities. A lattice-based model describes the dispersion relations of the rotational modes for small wave numbers. The rotational modes are perfectly explained by the model if tangential elastic forces between the disks in contact are large enough. If the tangential forces are comparable with or smaller than normal forces, the model fails for short wave lengths. However, the dispersion relation of the rotational modes then follows the model prediction for transverse modes, implying that the fast oscillations of disks' rotations switch to acoustic sound behavior. We evidence such a transition of the rotational modes by analyzing the eigen vectors of disordered frictional disks and identify upper and lower limits of the frequency-bands. We find that those are not reversed over the whole range of tangential stiffness as a remarkable difference from the rotational sound in frictional particles on a lattice. △ Less

Submitted 21 July, 2018; originally announced July 2018.

Comments: 6 pages, 7 figures

Journal ref: Phys. Rev. E 99, 012906 (2019)

Wet granular flow control through liquid induced cohesion

Authors: Ahmed Jarray, Vanessa Magnanimo, Stefan Luding

Abstract: Liquid has a significant effect on the flow of wet granular assemblies. We explore the effects of liquid induced cohesion on the flow characteristics of wet granular materials. We propose a cohesion-scaling approach that enables invariant flow characteristics for different particles sizes in rotating drums. The strength of capillary forces between the particles is significantly reduced by making t… ▽ More Liquid has a significant effect on the flow of wet granular assemblies. We explore the effects of liquid induced cohesion on the flow characteristics of wet granular materials. We propose a cohesion-scaling approach that enables invariant flow characteristics for different particles sizes in rotating drums. The strength of capillary forces between the particles is significantly reduced by making the glass beads hydrophobic via chemical silanization. Main results of rotating drum experiments are that liquid-induced cohesion decreases both the width of the flowing region and the velocity of the particles at the free surface, but increases the width of the creeping region as well as the dynamic angle of repose. Also, the local granular temperature in the flowing region decreases with an increase of the capillary force. The scaling methodology in the flow regimes considered (rolling and cascading regimes) yields invariant bed flow characteristics for different particle sizes. △ Less

Submitted 8 January, 2018; originally announced January 2018.

Comments: Reviewed with minor comments and resubmitted to Powder Technology. 35 pages, 20 figures

Segregation of large particles in dense granular flows: A granular Saffman effect?

Authors: Kasper van der Vaart, Marnix P. van Schrojenstein Lantman, Thomas Weinhart, Stefan Luding, Christophe Ancey, Anthony R. Thornton

Abstract: We report on the scaling between the lift force and the velocity lag experienced by a single particle of different size in a monodisperse dense granular chute flow. The similarity of this scaling to the Saffman lift force in (micro) fluids, suggests an inertial origin for the lift force responsible for segregation of (isolated, large) intruders in dense granular flows. We also observe an anisotrop… ▽ More We report on the scaling between the lift force and the velocity lag experienced by a single particle of different size in a monodisperse dense granular chute flow. The similarity of this scaling to the Saffman lift force in (micro) fluids, suggests an inertial origin for the lift force responsible for segregation of (isolated, large) intruders in dense granular flows. We also observe an anisotropic pressure/stress field surrounding the particle, which potentially lies at the origin of the velocity lag. These findings are relevant for modelling and theoretical predictions of particle-size segregation. At the same time, the suggested interplay between polydispersity and inertial effects in dense granular flows with stress- and strain-gradients, implies striking new parallels between fluids, suspensions and granular flows with wide application perspectives. △ Less

Submitted 4 June, 2018; v1 submitted 18 May, 2017; originally announced May 2017.

Journal ref: Phys. Rev. Fluids 3, 074303 (2018)

Merging fluid and solid granular behavior

Authors: Dalila Vescovi, Stefan Luding

Abstract: Simple homogeneous shear flows of frictionless, deformable particles are studied by particle simulations at large shear rates and for differently soft, deformable particles. The particle stiffness sets a time-scale that can be used to scale the physical quantities; thus the dimensionless shear rate, i.e. the inertial number (inversely proportional to pressure), can alternatively be expressed as in… ▽ More Simple homogeneous shear flows of frictionless, deformable particles are studied by particle simulations at large shear rates and for differently soft, deformable particles. The particle stiffness sets a time-scale that can be used to scale the physical quantities; thus the dimensionless shear rate, i.e. the inertial number (inversely proportional to pressure), can alternatively be expressed as inversely proportional to the square root of the particle stiffness. Asymptotic scaling relations for the field variables pressure, shear stress and granular temperature are inferred from simulations in both fluid and solid regimes, corresponding to unjammed and jammed conditions. Then the limit cases are merged to unique constitutive relations that cover also the transition zone in proximity of jamming. By exploiting the diverging behavior of the scaling laws at the jamming density, we arrive at continuous and differentiable phenomenological constitutive relations for the stresses and the granular temperature as functions of the volume fraction, shear rate, particle stiffness and distance from jamming. In contrast to steady shear flows of hard particles the (shear) stress ratio does not collapse as a function of the inertial number, indicating the need for an additional control parameter. In the range of particle stiffnesses investigated, in the solid regime, only the pressure is rate independent, whereas the shear stress exhibits a slight shear rate- and stiffness-dependency. △ Less

Submitted 23 September, 2016; originally announced September 2016.

Comments: 37 pages, 14 figures, submitted to Soft Matter

Towards a general(ized) shear thickening rheology of wet granular materials under small pressure

Authors: Sudeshna Roy, Stefan Luding, Thomas Weinhart

Abstract: We study the rheology of dry and wet granular materials in the steady quasistatic regime using the Discrete Element Method (DEM) in a split-bottom ring shear cell with focus on the macroscopic friction. The aim of our study is to understand the local rheology of bulk flow at various positions in the shear band, where the system is in critical state. The general(ized) rheology has four dimensionles… ▽ More We study the rheology of dry and wet granular materials in the steady quasistatic regime using the Discrete Element Method (DEM) in a split-bottom ring shear cell with focus on the macroscopic friction. The aim of our study is to understand the local rheology of bulk flow at various positions in the shear band, where the system is in critical state. The general(ized) rheology has four dimensionless control parameters that relate the time scales of five significant phenomena, namely, the time scales related to confining pressure $t_p$, shear rate $t_{\dotγ}$, particle stiffness $t_k$, gravity $t_g$ and cohesion $t_c$, respectively. We show that those phenomena collectively contribute to the rheology as multiplicative correction functions. While $t_{\dotγ}$ is large and thus little important for most of the data studied, it can increase the friction of flow in critical state, where the shear gradients are high. $t_g$ and $t_k$ are comparable to $t_p$ in the bulk, but become more or less dominant relative to $t_p$ at the extremes of the free surface and deep inside the bulk, respectively. We also measure the effect of strong wet cohesion on the flow rheology, as quantified by decreasing $t_c$. Furthermore, the proposed rheological model predicts well the shear thinning behavior both in the bulk and near the free surface; shear thinning develops to shear thickening near the free surface with increasing cohesion. △ Less

Submitted 10 September, 2016; originally announced September 2016.

Enhanced micropolar model for wave propagation in ordered granular materials

Authors: A. Merkel, S. Luding

Abstract: The vibrational properties of a face-centered cubic granular crystal of monodisperse particles are predicted using a discrete model as well as two micropolar models, first the classical Cosserat and second an enhanced Cosserat-type model, that properly takes into account all degrees of freedom at the contacts between the particles. The continuum models are derived from the discrete model via a mic… ▽ More The vibrational properties of a face-centered cubic granular crystal of monodisperse particles are predicted using a discrete model as well as two micropolar models, first the classical Cosserat and second an enhanced Cosserat-type model, that properly takes into account all degrees of freedom at the contacts between the particles. The continuum models are derived from the discrete model via a micro-macro transition of the discrete relative displacements and particle rotations to the respective continuum field variables. Next, only the long wavelength approximations of the models are compared and, considering the discrete model as reference, the Cosserat model shows inconsistent predictions of the bulk wave dispersion relations. This can be explained by an insufficient modeling of sliding mode of particle interactions in the Cosserat model. An enhanced micropolar model is proposed including only one new elastic tensor from the more complete second order gradient micropolar theory. This enhanced micropolar model then involves the minimum number of elastic constants to consistently predict the dispersion relations in the long wavelength limit. △ Less

Submitted 17 April, 2016; originally announced April 2016.

Comments: 25 pages, 7 figures

A master equation for force distributions in soft particle packings - Irreversible mechanical responses to isotropic compression and decompression

Authors: Kuniyasu Saitoh, Vanessa Magnanimo, Stefan Luding

Abstract: Mechanical responses of soft particle packings to quasi-static deformations are determined by the microscopic restructuring of force-chain networks, where complex non-affine displacements of constituent particles cause the irreversible macroscopic behavior. Recently, we have proposed a master equation for the probability distribution functions of contact forces and interparticle gaps [K. Saitoh et… ▽ More Mechanical responses of soft particle packings to quasi-static deformations are determined by the microscopic restructuring of force-chain networks, where complex non-affine displacements of constituent particles cause the irreversible macroscopic behavior. Recently, we have proposed a master equation for the probability distribution functions of contact forces and interparticle gaps [K. Saitoh et al., Soft Matter 11, 1253 (2015)], where mutual exchanges of contacts and interparticle gaps, i.e. opening and closing contacts, are also involved in the stochastic description with the aid of Delaunay triangulations. We describe full details of the master equation and numerically investigate irreversible mechanical responses of soft particle packings to cyclic loading. The irreversibility observed in molecular dynamics simulations is well reproduced by the master equation if the system undergoes quasi-static deformations. We also confirm that the degree of irreversible responses is a decreasing function of the area fraction and the number of cycles. △ Less

Submitted 15 July, 2015; originally announced July 2015.

Comments: 17 pages, 21 figures (6 figures are not displayed)

Macroscopic model with anisotropy based on micro-macro informations

Authors: Nishant Kumar, Stefan Luding, Vanessa Magnanimo

Abstract: Physical experiments can characterize the elastic response of granular materials in terms of macroscopic state-variables, namely volume (packing) fraction and stress, while the microstructure is not accessible and thus neglected. Here, by means of numerical simulations, we analyze dense, frictionless, granular assemblies with the final goal to relate the elastic moduli to the fabric state, i.e., t… ▽ More Physical experiments can characterize the elastic response of granular materials in terms of macroscopic state-variables, namely volume (packing) fraction and stress, while the microstructure is not accessible and thus neglected. Here, by means of numerical simulations, we analyze dense, frictionless, granular assemblies with the final goal to relate the elastic moduli to the fabric state, i.e., to micro-structural averaged contact network features as contact number density and anisotropy. The particle samples are first isotropically compressed and later quasi-statically sheared under constant volume (undrained conditions). From various static, relaxed configurations at different shear strains, now infinitesimal strain steps are applied to "measure" the effective elastic response; we quantify the strain needed so that plasticity in the sample develops as soon as contact and structure rearrangements happen. Because of the anisotropy induced by shear, volumetric and deviatoric stresses and strains are cross-coupled via a single anisotropy modulus, which is proportional to the product of deviatoric fabric and bulk modulus (i.e. the isotropic fabric). Interestingly, the shear modulus of the material depends also on the actual stress state, along with the contact configuration anisotropy. Finally, a constitutive model based on incremental evolution equations for stress and fabric is introduced. By using the previously measured dependence of the stiffness tensor (elastic moduli) on the microstructure, the theory is able to predict with good agreement the evolution of pressure, shear stress and deviatoric fabric (anisotropy) for an independent undrained cyclic shear test, including the response to reversal of strain. △ Less

Submitted 15 June, 2015; v1 submitted 9 June, 2015; originally announced June 2015.

Journal ref: Acta Mechanica, Volume 225, Issue 8, pp 2319-2343, 2014

Tuning the bulk properties of bidisperse granular mixtures by small amount of fines

Authors: Nishant Kumar, Vanessa Magnanimo, Marco Ramaioli, Stefan Luding

Abstract: We study the bulk properties of isotropic bidisperse granular mixtures using discrete element simulations. The focus is on the influence of the size (radius) ratio of the two constituents and volume fraction on the mixture properties. We show that the effective bulk modulus of a dense granular (base) assembly can be enhanced by up to 20% by substituting as little as 5% of its volume with smaller s… ▽ More We study the bulk properties of isotropic bidisperse granular mixtures using discrete element simulations. The focus is on the influence of the size (radius) ratio of the two constituents and volume fraction on the mixture properties. We show that the effective bulk modulus of a dense granular (base) assembly can be enhanced by up to 20% by substituting as little as 5% of its volume with smaller sized particles. Particles of similar sizes barely affect the macroscopic properties of the mixture. On the other extreme, when a huge number of fine particles are included, most of them lie in the voids of the base material, acting as rattlers, leading to an overall weakening effect. In between the limits, an optimum size ratio that maximizes the bulk modulus of the mixture is found. For loose systems, the bulk modulus decreases monotonically with addition of fines regardless of the size ratio. Finally, we relate the mixture properties to the 'typical' pore size in a disordered structure as induced by the combined effect of operating volume fraction (consolidation) and size ratio. △ Less

Submitted 9 July, 2016; v1 submitted 9 June, 2015; originally announced June 2015.

Journal ref: Powder Technology, 293, 94-112, 2016

A Master equation for force distributions in polydisperse frictional particles

Authors: Kuniyasu Saitoh, Vanessa Magnanimo, Stefan Luding

Abstract: An incremental evolution equation, i.e. a Master equation in statistical mechanics, is introduced for force distributions in polydisperse frictional particle packings. As basic ingredients of the Master equation, the conditional probability distributions of particle overlaps are determined by molecular dynamics simulations. Interestingly, tails of the distributions become much narrower in the case… ▽ More An incremental evolution equation, i.e. a Master equation in statistical mechanics, is introduced for force distributions in polydisperse frictional particle packings. As basic ingredients of the Master equation, the conditional probability distributions of particle overlaps are determined by molecular dynamics simulations. Interestingly, tails of the distributions become much narrower in the case of frictional particles than frictionless particles, implying that correlations of overlaps are strongly reduced by microscopic friction. Comparing different size distributions, we find that the tails are wider for the wider distribution. △ Less

Submitted 28 May, 2015; originally announced May 2015.

Comments: 12 pages, 7 figures. Conference proceedings for PARTICLES 2015, 28-30 September, 2015, Barcelona, Spain

Micro-macro transition and simplified contact models for wet granular materials

Authors: Sudeshna Roy, Abhinendra Singh, Stefan Luding, Thomas Weinhart

Abstract: Wet granular materials in a quasi-static steady state shear flow have been studied with discrete particle simulations. Macroscopic quantities, consistent with the conservation laws of continuum theory, are obtained by time averaging and spatial coarse-graining. Initial studies involve understanding the effect of liquid content and liquid properties like the surface tension on the macroscopic quant… ▽ More Wet granular materials in a quasi-static steady state shear flow have been studied with discrete particle simulations. Macroscopic quantities, consistent with the conservation laws of continuum theory, are obtained by time averaging and spatial coarse-graining. Initial studies involve understanding the effect of liquid content and liquid properties like the surface tension on the macroscopic quantities. Two parameters of the liquid bridge contact model have been studied as the constitutive parameters that define the structure of this model (i) the rupture distance of the liquid bridge model, which is proportional to the liquid content, and (ii) the maximum adhesive force, as controlled by the surface tension of the liquid. Subsequently a correlation is developed between these micro parameters and the steady state cohesion in the limit of zero confining pressure. Furthermore, as second result, the macroscopic torque measured at the walls, which is an experimentally accessible parameter, is predicted from our simulation results as a dependence on the micro-parameters. Finally, the steady state cohesion of a realistic non-linear liquid bridge contact model scales well with the steady state cohesion for a simpler linearized irreversible contact model with the same maximum adhesive force and equal energy dissipated per contact. △ Less

Submitted 21 June, 2015; v1 submitted 27 May, 2015; originally announced May 2015.

From the granular Leidenfrost state to buoyancy-driven convection

Authors: Nicolas Rivas, Anthony R. Thornton, Stefan Luding, Devaraj van der Meer

Abstract: Grains inside a vertically vibrated box undergo a transition from a density inverted and horizontally homogeneous state, referred to as the granular Leidenfrost state, to a buoyancy-driven convective state. We perform a simulational study of the precursors of such a transition, and quantify their dynamics as the bed of grains is progressively fluidized. The transition is preceded by transient conv… ▽ More Grains inside a vertically vibrated box undergo a transition from a density inverted and horizontally homogeneous state, referred to as the granular Leidenfrost state, to a buoyancy-driven convective state. We perform a simulational study of the precursors of such a transition, and quantify their dynamics as the bed of grains is progressively fluidized. The transition is preceded by transient convective states, which increase their correlation time as the transition point is approached. Increasingly correlated convective flows lead to density fluctuations, as quantified by the structure factor, that also shows critical behaviour near the transition point. The amplitude of the modulations in the vertical velocity field are seen to be best described by a quintic supercritical amplitude equation with an additive noise term. The validity of such an amplitude equation, and previously observed collective semi-periodic oscillations of the bed of grains, suggests a new interpretation of the transition analogous to a coupled chain of vertically vibrated damped oscillators. Increasing the size of the container shows metastability of convective states, as well as an overall invariant critical behaviour close to the transition. △ Less

Submitted 24 April, 2015; originally announced April 2015.

Comments: 10 pages, 10 figures

A contact model for sticking of adhesive meso-particles

Authors: Abhinendra Singh, Vanessa Magnanimo, Stefan Luding

Abstract: The interaction between visco-elasto-plastic and adhesive particles is the subject of this study, where "meso-particles" are introduced, i.e., simplified particles, whose contact mechanics is not taken into account in all details. A few examples of meso-particles include agglomerates or groups of primary particles, or inhomogeneous particles with micro-structures of the scale of the contact deform… ▽ More The interaction between visco-elasto-plastic and adhesive particles is the subject of this study, where "meso-particles" are introduced, i.e., simplified particles, whose contact mechanics is not taken into account in all details. A few examples of meso-particles include agglomerates or groups of primary particles, or inhomogeneous particles with micro-structures of the scale of the contact deformation, such as core-shell materials. A simple, flexible contact model for meso-particles is proposed, which allows to model the bulk behavior of assemblies of many particles in both rapid and slow, quasi-static flow situations. An attempt is made to categorize existing contact models for the normal force, discuss all the essential mechanical ingredients that must enter the model (qualitatively) and finally solve it analytically. The model combines a short-ranged, non-contact part (resembling either dry or wet materials) with an elaborate, visco-elasto-plastic and adhesive contact law. Using energy conservation arguments, an analytical expression for the coefficient of restitution is derived in terms of the impact velocity (for pair interactions or, equivalently, without loss of generality, for quasi-static situations in terms of the maximum overlap or confining stress). Adhesive particles (or meso-particles) stick to each other at very low impact velocity, while they rebound less dissipatively with increasing velocity, in agreement with previous studies. For even higher impact velocities an interesting second sticking and rebound regime is reported. The low velocity sticking is due to non-contact adhesive forces, the first rebound regime is due to stronger elastic and kinetic energies with little dissipation, while the high velocity sticking is generated by the non-linearly increasing, history dependent plastic dissipation and adhesive contact force. △ Less

Submitted 1 December, 2015; v1 submitted 12 March, 2015; originally announced March 2015.

Comments: Resubmission to Powtech

Role of gravity or confining pressure and contact stiffness in granular rheology

Authors: Abhinendra Singh, Vanessa Magnanimo, Kuniyasu Saitoh, Stefan Luding

Abstract: The steady shear rheology of granular materials is investigated in slow quasi-static states and inertial flows. The effect of the gravity field and contact stiffness, which are conventionally trivialized is the focus of this study. Series of Discrete Element Method simulations are performed on a weakly frictional granular assembly in a split-bottom geometry considering various gravity fields and c… ▽ More The steady shear rheology of granular materials is investigated in slow quasi-static states and inertial flows. The effect of the gravity field and contact stiffness, which are conventionally trivialized is the focus of this study. Series of Discrete Element Method simulations are performed on a weakly frictional granular assembly in a split-bottom geometry considering various gravity fields and contact stiffnesses. While traditionally the inertial number, i.e., the ratio of stress to strain-rate timescales describes the flow rheology, we find that a second dimensionless number, the ratio of softness and stress timescales, must also be included to characterize the bulk flow behavior. For slow, quasi-static flows, the density increases while the macroscopic friction decreases with respective increase in particle softness and gravity. This trend is added to the $μ(I)$ rheology and can be traced back to the anisotropy in the contact network, displaying a linear correlation between macroscopic friction and deviatoric fabric in the steady state. Interestingly, the linear relation holds when the external rotation rate is increased for a given gravity field and contact stiffness. △ Less

Submitted 2 December, 2014; originally announced December 2014.

Comments: 27 pages, 15 figures

Shaping Segregation: Convexity vs. Concavity

Authors: S. Gonzalez, C. R. K. Windows-Yule, S. Luding, D. J. Parker, A. R. Thornton

Abstract: Controlling segregation is both a practical and a theoretical challenge. In this Letter we demonstrate a manner in which rotation-induced segregation may be controlled by altering the geometry of the rotating containers in which granular systems are housed. Using a novel drum design comprising concave and convex geometry, we explore a means by which radial size-segregation may be used to drive axi… ▽ More Controlling segregation is both a practical and a theoretical challenge. In this Letter we demonstrate a manner in which rotation-induced segregation may be controlled by altering the geometry of the rotating containers in which granular systems are housed. Using a novel drum design comprising concave and convex geometry, we explore a means by which radial size-segregation may be used to drive axial segregation, resulting in an order of magnitude increase in the axial segregation rate. This finding, and the explanations provided of its underlying mechanisms, could lead to radical new designs for a broad range of particle processing applications. △ Less

Submitted 23 October, 2014; originally announced October 2014.

Comments: 5 pages, 6 figures

Experiments and Discrete Element Simulation of the Dosing of Cohesive Powders in a Simplified Geometry

Authors: Olukayode I. Imole, Dinant Krijgsman, Thomas Weinhart, Vanessa Magnanimo, Bruno E. Chavez Montes, Marco Ramaioli, Stefan Luding

Abstract: We perform experiments and discrete element simulations on the dosing of cohesive granular materials in a simplified geometry. The setup is a simplified canister box where the powder is dosed out of the box through the action of a constant-pitch screw feeder connected to a motor. A dose consists of a rotation step followed by a period of rest before the next dosage. From the experiments, we repo… ▽ More We perform experiments and discrete element simulations on the dosing of cohesive granular materials in a simplified geometry. The setup is a simplified canister box where the powder is dosed out of the box through the action of a constant-pitch screw feeder connected to a motor. A dose consists of a rotation step followed by a period of rest before the next dosage. From the experiments, we report on the operational performance of the dosing process through a variation of dosage time, coil pitch and initial powder mass. We find that the dosed mass shows an increasing linear dependence on the dosage time and rotation speed. In contrast, the mass output from the canister is not directly proportional to an increase/decrease in the number coils. By calibrating the interparticle friction and cohesion, we show that DEM simulation can quantitatively reproduce the experimental findings for smaller masses but also overestimate arching and blockage. With appropriate homogenization tools, further insights into microstructure and macroscopic fields can be obtained. This work shows that particle scaling and the adaptation of particle properties is a viable approach to overcome the untreatable number of particles inherent in experiments with fine, cohesive powders and opens the gateway to simulating their flow in more complex geometries. △ Less

Submitted 13 October, 2014; originally announced October 2014.

Slow relaxation behavior of cohesive powders

Authors: Olukayode I. Imole, Maria Paulick, Martin Morgeneyer, Vanessa Magnanimo, Bruno E. Chavez Montes, Marco Ramaioli, Arno Kwade, Stefan Luding

Abstract: We present findings from uniaxial (oedometric) compression tests on two cohesive industrially relevant granular materials (cocoa and limestone powder). Experimental results are presented for the compressibility, tested with two devices -- the FT4 Powder Rheometer and the custom made lambdameter. We focus on the stress response and the slow relaxation behavior of the cohesive samples tested. After… ▽ More We present findings from uniaxial (oedometric) compression tests on two cohesive industrially relevant granular materials (cocoa and limestone powder). Experimental results are presented for the compressibility, tested with two devices -- the FT4 Powder Rheometer and the custom made lambdameter. We focus on the stress response and the slow relaxation behavior of the cohesive samples tested. After compression ends, at constant volume, the ongoing stress relaxation is found to follow a power law consistently for both cohesive powders and for the different testing equipments. A simple (incremental algebraic evolution) model is proposed for the stress relaxation in cohesive powders, which includes a response timescale along with a second, dimensionless relaxation parameter. The reported observations are useful for both the improvement of discrete element simulations and constitutive macroscopic models for cohesive granular materials. △ Less

Submitted 8 October, 2014; originally announced October 2014.

Memory of jamming - multiscale models for soft and granular matter

Authors: Nishant Kumar, Stefan Luding

Abstract: Soft, disordered, micro-structured materials are ubiquitous in nature and industry, and are different from ordinary fluids or solids, with unusual, interesting static and flow properties. The transition from fluid to solid -at the so-called jamming density- features a multitude of complex mechanisms, but there is no unified theoretical framework that explains them all. In this study, a simple yet… ▽ More Soft, disordered, micro-structured materials are ubiquitous in nature and industry, and are different from ordinary fluids or solids, with unusual, interesting static and flow properties. The transition from fluid to solid -at the so-called jamming density- features a multitude of complex mechanisms, but there is no unified theoretical framework that explains them all. In this study, a simple yet quantitative and predictive model is presented, which allows for a variable, changing jamming density, encompassing the memory of the deformation history and explaining a multitude of phenomena at and around jamming. The jamming density, now introduced as a new state-variable, changes due to the deformation history and relates the system's macroscopic response to its microstructure. The packing efficiency can increase logarithmically slow under gentle repeated (isotropic) compression, leading to an increase of the jamming density. In contrast, shear deformations cause anisotropy, changing the packing efficiency exponentially fast with either dilatancy or compactancy. The memory of the system near jamming can be explained by a microstatistical model that involves a multiscale, fractal energy landscape and links the microscopic particle picture to the macroscopic continuum description, providing a unified explanation for the qualitatively different flow-behavior for different deformation modes. To complement our work, a recipe to extract the history-dependent jamming density from experimentally accessible data is proposed, and alternative state-variables are compared. The proposed simple macroscopic constitutive model is calibrated with the memory of microstructure. Such approach can help understanding predicting and mitigating failure of structures or geophysical hazards, and will bring forward industrial process design/optimization, and help solving scientific challenges in fundamental research. △ Less

Submitted 11 February, 2016; v1 submitted 23 July, 2014; originally announced July 2014.

Journal ref: Granular Matter, 18(3), 1-21, 2016

Free Cooling Phase-Diagram of Hard-Spheres with Short- and Long-Range Interactions

Authors: S. Gonzalez, A. R. Thornton, S. Luding

Abstract: We study the stability, the clustering and the phase-diagram of free cooling granular gases. The systems consist of mono-disperse particles with additional non-contact (long-range) interactions, and are simulated here by the event-driven molecular dynamics algorithm with discrete (short-range shoulders or wells) potentials (in both 2D and 3D). Astonishingly good agreement is found with a mean fiel… ▽ More We study the stability, the clustering and the phase-diagram of free cooling granular gases. The systems consist of mono-disperse particles with additional non-contact (long-range) interactions, and are simulated here by the event-driven molecular dynamics algorithm with discrete (short-range shoulders or wells) potentials (in both 2D and 3D). Astonishingly good agreement is found with a mean field theory, where only the energy dissipation term is modified to account for both repulsive or attractive non-contact interactions. Attractive potentials enhance cooling and structure formation (clustering), whereas repulsive potentials reduce it, as intuition suggests. The system evolution is controlled by a single parameter: the non-contact potential strength scaled by the fluctuation kinetic energy (granular temperature). When this is small, as expected, the classical homogeneous cooling state is found. However, if the effective dissipation is strong enough, structure formation proceeds, before (in the repulsive case) non-contact forces get strong enough to undo the clustering (due to the ongoing dissipation of granular temperature). For both repulsive and attractive potentials, in the homogeneous regime, the cooling shows a universal behaviour when the (inverse) control parameter is used as evolution variable instead of time. The transition to a non-homogeneous regime, as predicted by stability analysis, is affected by both dissipation and potential strength. This can be cast into a phase diagram where the system changes with time, which leaves open many challenges for future research. △ Less

Submitted 9 July, 2014; originally announced July 2014.

Comments: 22 pages, 15 figures

Recent advances in the simulation of particle-laden flows

Authors: Jens Harting, Stefan Frijters, Marco Ramaioli, Martin Robinson, Dietrich E. Wolf, Stefan Luding

Abstract: A substantial number of algorithms exists for the simulation of moving particles suspended in fluids. However, finding the best method to address a particular physical problem is often highly non-trivial and depends on the properties of the particles and the involved fluid(s) together. In this report we provide a short overview on a number of existing simulation methods and provide two state of th… ▽ More A substantial number of algorithms exists for the simulation of moving particles suspended in fluids. However, finding the best method to address a particular physical problem is often highly non-trivial and depends on the properties of the particles and the involved fluid(s) together. In this report we provide a short overview on a number of existing simulation methods and provide two state of the art examples in more detail. In both cases, the particles are described using a Discrete Element Method (DEM). The DEM solver is usually coupled to a fluid-solver, which can be classified as grid-based or mesh-free (one example for each is given). Fluid solvers feature different resolutions relative to the particle size and separation. First, a multicomponent lattice Boltzmann algorithm (mesh-based and with rather fine resolution) is presented to study the behavior of particle stabilized fluid interfaces and second, a Smoothed Particle Hydrodynamics implementation (mesh-free, meso-scale resolution, similar to the particle size) is introduced to highlight a new player in the field, which is expected to be particularly suited for flows including free surfaces. △ Less

Submitted 25 June, 2014; originally announced June 2014.

Comments: 16 pages, 4 figures

Journal ref: European Physical Journal Special Topics 223, 2253-2267 (2014)

Structure characterization of hard sphere packings in amorphous and crystalline states

Authors: Vitaliy Ogarko, Nicolas Rivas, Stefan Luding

Abstract: The channel size distribution in hard sphere systems, based on the local neighbor correlation of four particle positions, is investigated for all volume fractions up to jamming. For each particle, all three particle combinations of neighbors define channels, which are relevant for the concept of caging. The analysis of the channel size distribution is shown to be very useful in distinguishing betw… ▽ More The channel size distribution in hard sphere systems, based on the local neighbor correlation of four particle positions, is investigated for all volume fractions up to jamming. For each particle, all three particle combinations of neighbors define channels, which are relevant for the concept of caging. The analysis of the channel size distribution is shown to be very useful in distinguishing between gaseous, liquid, partially and fully crystallized, and glassy (random) jammed states. A common microstructural feature of four coplanar particles is observed in crystalline and glassy jammed states, suggesting the presence of "hidden" two-dimensional order in three-dimensional random close packings. △ Less

Submitted 20 May, 2014; originally announced May 2014.

Comments: 5 pages, 5 figures

Rheology of weakly wetted granular materials - a comparison of experimental and numerical data

Authors: Ruediger Schwarze, Anton Gladkyy, Fabian Uhlig, Stefan Luding

Abstract: Shear cell simulations and experiments of weakly wetted particles (a few volume percent liquid binders) are compared, with the goal to understand their flow rheology. Application examples are cores for metal casting by core shooting made of sand and liquid binding materials. The experiments are carried out with a Couette-like rotating viscometer. The weakly wetted granular materials are made of qu… ▽ More Shear cell simulations and experiments of weakly wetted particles (a few volume percent liquid binders) are compared, with the goal to understand their flow rheology. Application examples are cores for metal casting by core shooting made of sand and liquid binding materials. The experiments are carried out with a Couette-like rotating viscometer. The weakly wetted granular materials are made of quartz sand and small amounts of Newtonian liquids. For comparison, experiments on dry sand are also performed with a modified configuration of the viscometer. The numerical model involves spherical, monodisperse particles with contact forces and a simple liquid bridge model for individual capillary bridges between two particles. Different liquid content and properties lead to different flow rheology when measuring the shear stress-strain relations. In the experiments of the weakly wetted granular material, the apparent shear viscosity $η_g$ scales inversely proportional to the inertial number $I$, for all shear rates. On the contrary, in the dry case, an intermediate scaling regime inversely quadratic in $I$ is observed for moderate shear rates. In the simulations, both scaling regimes are found for dry and wet granular material as well. △ Less

Submitted 12 September, 2014; v1 submitted 31 March, 2014; originally announced April 2014.

Journal ref: Granular Matter 15, 4 (2013), 455-465

Rolling, sliding & torsion of micron-sized silica particles - Experimental, numerical and theoretical analysis

Authors: Regina Fuchs, Thomas Weinhart, Jan Meyer, Thorsten Staedler, Xin Jiang, Stefan Luding

Abstract: The contact mechanics of individual, very small particles with other particles and walls is studied using a nanoindenter setup that allows normal and lateral displacement control and measurement of the respective forces. The sliding, rolling and torsional forces and torques are tested with borosilicate microspheres, featuring radii of about 10$μ$m. The contacts are with flat silicon substrates of… ▽ More The contact mechanics of individual, very small particles with other particles and walls is studied using a nanoindenter setup that allows normal and lateral displacement control and measurement of the respective forces. The sliding, rolling and torsional forces and torques are tested with borosilicate microspheres, featuring radii of about 10$μ$m. The contacts are with flat silicon substrates of different roughness for pure sliding and rolling and with silicon based, ion-beam crafted rail systems for combined rolling and torsion. The experimental results are discussed and compared to various analytical predictions and contact models, allowing for two concurrent interpretations of the effects of surface roughness, plasticity and adhesion. This enables us to determine both rolling and torsion friction coefficients together with their associated length scales. Interestingly, even though normal contacts behave elastically (Hertzian), all other modes of motion display effects due to surface roughness and consequent plastic deformation. The influence of adhesion is interpreted in the framework of different models and is very different for different degrees of freedom, being largest for rolling. △ Less

Submitted 12 January, 2014; originally announced January 2014.

Effect of cohesion on shear banding in quasi-static granular material

Authors: Abhinendra Singh, Vanessa Magnanimo, Kuniyasu Saitoh, Stefan Luding

Abstract: It is widely recognized in particle technology that adhesive powders show a wide range of different bulk behavior due to the peculiarity of the particle interaction. We use Discrete Element simulations to investigate the effect of contact cohesion on the steady state of dense powders in a slowly sheared split-bottom Couette cell, which imposes a wide stable shear band. The intensity of cohesive fo… ▽ More It is widely recognized in particle technology that adhesive powders show a wide range of different bulk behavior due to the peculiarity of the particle interaction. We use Discrete Element simulations to investigate the effect of contact cohesion on the steady state of dense powders in a slowly sheared split-bottom Couette cell, which imposes a wide stable shear band. The intensity of cohesive forces can be quantified by the {\em granular Bond number} ($Bo$), namely the ratio between maximum attractive force and average force due to external compression. We find that the shear banding phenomenon is almost independent of cohesion for Bond numbers $Bo<1$, but for $Bo \ge 1$ cohesive forces start to play an important role, as both width and center position of the band increase for $Bo > 1$. Inside the shear band, the mean normal contact force is always independent of cohesion and depends only on the confining stress. In contrast, when the behavior is analyzed focusing on the eigen-directions of the local strain rate tensor, a dependence on cohesion shows up. Forces carried by contacts along the compressive and tensile directions are symmetric about the mean force (larger and smaller respectively), while the force along the third, neutral direction follows the mean force. This anisotropy of the force network increases with cohesion, just like the heterogeneity in all (compressive, tensile and neutral) directions. △ Less

Submitted 11 July, 2014; v1 submitted 26 December, 2013; originally announced December 2013.

Comments: 12 pages, 20 figures, accepted in Physical Review E

Master equation for the probability distribution functions of forces in soft particle packings

Authors: Kuniyasu Saitoh, Vanessa Magnanimo, Stefan Luding

Abstract: Employing molecular dynamics simulations of jammed soft particles, we study microscopic responses of force-chain networks to quasi-static isotropic (de)compressions. We show that not only contacts but also interparticle gaps between the nearest neighbors must be considered for the stochastic evolution of the probability distribution functions (PDFs) of forces, where the mutual exchange of contacts… ▽ More Employing molecular dynamics simulations of jammed soft particles, we study microscopic responses of force-chain networks to quasi-static isotropic (de)compressions. We show that not only contacts but also interparticle gaps between the nearest neighbors must be considered for the stochastic evolution of the probability distribution functions (PDFs) of forces, where the mutual exchange of contacts and interparticle gaps, i.e. opening and closing contacts, are also crucial to the incremental system behaviors. By numerically determining the transition rates for all changes of contacts and gaps, we formulate a Master equation for the PDFs of forces, where the insight one gets from the transition rates is striking: The mean change of forces reflects non-affine system response, while their fluctuations obey uncorrelated Gaussian statistics. In contrast, interparticle gaps are reacting mostly affine in average, but imply multi-scale correlations according to a wider stable distribution function. △ Less

Submitted 5 November, 2014; v1 submitted 21 November, 2013; originally announced November 2013.

Comments: 5 pages, 4 figures, submitted to Soft Matter

Low-frequency oscillations in narrow vibrated granular systems

Authors: Nicolas Rivas, Stefan Luding, Anthony R Thornton

Abstract: We present simulations and a theoretical treatment of vertically vibrated granular media. The systems considered are confined in narrow quasi-two-dimensional and quasi-one-dimensional (column) geometries, where the vertical extension of the container is much larger than both horizontal lengths. The additional geometric constraint present in the column setup frustrates the convection state that is… ▽ More We present simulations and a theoretical treatment of vertically vibrated granular media. The systems considered are confined in narrow quasi-two-dimensional and quasi-one-dimensional (column) geometries, where the vertical extension of the container is much larger than both horizontal lengths. The additional geometric constraint present in the column setup frustrates the convection state that is normally observed in wider geometries. This makes it possible to study collective oscillations of the grains with a characteristic frequency that is much lower than the frequency of energy injection. The frequency and amplitude of these oscillations are studied as a function of the energy input parameters and the size of the container. We observe that, in the quasi-two-dimensional setup, low-frequency oscillations are present even in the convective regime. This suggests that they may play a significant role in the transition from a density inverted state to convection. Two models are also presented; the first one, based on Cauchy's equations, is able to predict with high accuracy the frequency of the particles' collective motion. This first principles model requires a single input parameter, i.e, the centre of mass of the system. The model shows that a sufficient condition for the existence of the low-frequency mode is an inverted density profile with distinct low and high density regions, a condition that may apply to other systems too. The second, simpler model just assumes an harmonic oscillator like behaviour and, using thermodynamic arguments, is also able to reproduce the observed frequencies with high accuracy. △ Less

Submitted 7 October, 2013; originally announced October 2013.

Comments: 19 pages, 7 figures

Collective motion of macroscopic spheres floating on capillary ripples: Dynamic heterogeneity and dynamic criticality

Authors: Ceyda Sanlı, Kuniyasu Saitoh, Stefan Luding, Devaraj van der Meer

Abstract: When a dense monolayer of macroscopic slightly polydisperse spheres floats on chaotic capillary Faraday waves, a coexistence of large scale convective motion and caging dynamics typical for jammed systems is observed. We subtract the convective mean flow using a coarse graining and reveal subdiffusion for the caging time scales followed by a diffusive regime at later times. To test the system in t… ▽ More When a dense monolayer of macroscopic slightly polydisperse spheres floats on chaotic capillary Faraday waves, a coexistence of large scale convective motion and caging dynamics typical for jammed systems is observed. We subtract the convective mean flow using a coarse graining and reveal subdiffusion for the caging time scales followed by a diffusive regime at later times. To test the system in the light of dynamic criticality, we apply the methods of dynamic heterogeneity to obtain the power-law divergent time and length scales as the floater concentration approaches the jamming point. We find that these are independent of the application of the coarse graining procedure. The critical exponents are consistent with those found in dense suspensions of colloids indicating universal stochastic dynamics. △ Less

Submitted 8 May, 2014; v1 submitted 15 September, 2013; originally announced September 2013.

Comments: submitted, 6 pages, 3 figures

Journal ref: Phys. Rev. E 90 033018 (2014)

From creeping to inertial flow in porous media: a lattice Boltzmann - Finite Element study

Authors: Ariel Narváez, Kazem Yazdchi, Stefan Luding, Jens Harting

Abstract: The lattice Boltzmann method has been successfully applied for the simulation of flow through porous media in the creeping regime. Its technical properties, namely discretization, straightforward implementation and parallelization, are responsible for its popularity. However, flow through porous media is not restricted to near zero Reynolds numbers since inertial effects play a role in numerous na… ▽ More The lattice Boltzmann method has been successfully applied for the simulation of flow through porous media in the creeping regime. Its technical properties, namely discretization, straightforward implementation and parallelization, are responsible for its popularity. However, flow through porous media is not restricted to near zero Reynolds numbers since inertial effects play a role in numerous natural and industrial processes. In this paper we investigate the capability of the lattice Boltzmann method to correctly describe flow in porous media at moderate Reynolds numbers. The selection of the lattice resolution, the collision kernel and the boundary conditions becomes increasingly important and the challenge is to keep artifacts due to compressibility effects at a minimum. The lattice Boltzmann results show an accurate quantitative agreement with Finite Element Method results and evidence the capability of the method to reproduce Darcy's law at low Reynolds numbers and Forchheimer's law at high Reynolds numbers. △ Less

Submitted 22 January, 2013; v1 submitted 15 December, 2012; originally announced December 2012.

Comments: 9 pages, 7 figures

Slow Dynamics Near Jamming

Authors: Kuniyasu Saitoh, Vanessa Magnanimo, Stefan Luding

Abstract: Static and dynamic properties of two-dimensional bidisperse dissipative particles are numerically studied near the jamming transition. We investigate the dependency of the critical scaling on the ratio of the different diameters and find a new scaling of the maximum overlap (not consistent with the scaling of the mean overlap). The ratio of kinetic and potential energies drastically slows down nea… ▽ More Static and dynamic properties of two-dimensional bidisperse dissipative particles are numerically studied near the jamming transition. We investigate the dependency of the critical scaling on the ratio of the different diameters and find a new scaling of the maximum overlap (not consistent with the scaling of the mean overlap). The ratio of kinetic and potential energies drastically slows down near the jamming transition, i.e. the relaxation time diverges at the jamming point. △ Less

Submitted 11 September, 2012; originally announced September 2012.

Comments: 6 pages, 4 figures. Proceedings of the 28th International Symposium on Rarefied Gas Dynamics, AIP Conf. Proc. (2012), in press

Journal ref: AIP Conf. Proc. 1501 (2012) 1038

Closure Relations for Shallow Granular Flows from Particle Simulations

Authors: Thomas Weinhart, Anthony Thornton, Stefan Luding, Onno Bokhove

Abstract: The Discrete Particle Method (DPM) is used to model granular flows down an inclined chute. We observe three major regimes: static piles, steady uniform flows and accelerating flows. For flows over a smooth base, other (quasi-steady) regimes are observed where the flow is either highly energetic and strongly layered in depth for small inclinations, or non-uniform and oscillating for larger inclinat… ▽ More The Discrete Particle Method (DPM) is used to model granular flows down an inclined chute. We observe three major regimes: static piles, steady uniform flows and accelerating flows. For flows over a smooth base, other (quasi-steady) regimes are observed where the flow is either highly energetic and strongly layered in depth for small inclinations, or non-uniform and oscillating for larger inclinations. For steady uniform flows, depth profiles of density, velocity and stress have been obtained using an improved coarse-graining method, which allows accurate statistics even at the base of the flow. A shallow-layer model for granular flows is completed with macro-scale closure relations obtained from micro-scale DPM simulations of steady flows. We thus obtain relations for the effective basal friction, shape factor, mean density, and the normal stress anisotropy as functions of layer thickness, flow velocity and basal roughness. For collisional flows, the functional dependencies are well determined and have been obtained. △ Less

Submitted 25 August, 2011; originally announced August 2011.

Comments: Will be presented at PARTICLES 2011 - CIMNE

MSC Class: 70E55; 70E40; 70F40; 70S10

From discrete particles to continuum fields near a boundary

Authors: Thomas Weinhart, Anthony R. Thornton, Stefan Luding, Onno Bokhove

Abstract: An expression for the stress tensor near an external boundary of a discrete mechanical system is derived explicitly in terms of the constituents' degrees of freedom and interaction forces. Starting point is the exact and general coarse graining formulation presented by Goldhirsch in [I. Goldhirsch, Gran. Mat., 12(3):239-252, 2010], which is consistent with the continuum equations everywhere but do… ▽ More An expression for the stress tensor near an external boundary of a discrete mechanical system is derived explicitly in terms of the constituents' degrees of freedom and interaction forces. Starting point is the exact and general coarse graining formulation presented by Goldhirsch in [I. Goldhirsch, Gran. Mat., 12(3):239-252, 2010], which is consistent with the continuum equations everywhere but does not account for boundaries. Our extension accounts for the boundary interaction forces in a self-consistent way and thus allows the construction of continuous stress fields that obey the macroscopic conservation laws even within one coarse-graining width of the boundary. The resolution and shape of the coarse-graining function used in the formulation can be chosen freely, such that both microscopic and macroscopic effects can be studied. The method does not require temporal averaging and thus can be used to investigate time-dependent flows as well as static and steady situations. Finally, the fore-mentioned continuous field can be used to define 'fuzzy' (highly rough) boundaries. Two discrete particle method simulations are presented in which the novel boundary treatment is exemplified, including a chute flow over a base with roughness greater than a particle diameter. △ Less

Submitted 25 August, 2011; originally announced August 2011.

MSC Class: 70E55; 70E40; 70S10

Influence of polydispersity on micromechanics of granular materials

Authors: M. Reza Shaebani, Mahyar Madadi, Stefan Luding, Dietrich E. Wolf

Abstract: We study the effect of polydispersity on the macroscopic physical properties of granular packings in two and three dimensions. A mean-field approach is developed to approximate the macroscale quantities as functions of the microscopic ones. We show that the trace of the fabric and stress tensors are proportional to the mean packing properties (e.g. packing fraction, average coordination number, an… ▽ More We study the effect of polydispersity on the macroscopic physical properties of granular packings in two and three dimensions. A mean-field approach is developed to approximate the macroscale quantities as functions of the microscopic ones. We show that the trace of the fabric and stress tensors are proportional to the mean packing properties (e.g. packing fraction, average coordination number, and average normal force) and dimensionless correction factors, which depend only on the moments of the particle-size distribution. Similar results are obtained for the elements of the stiffness tensor of isotropic packings in the linear affine response regime. Our theoretical predictions are in good agreement with the simulation results. △ Less

Submitted 10 February, 2012; v1 submitted 11 July, 2011; originally announced July 2011.

Comments: 13 pages, 13 figures, 2 tables

Journal ref: Phys. Rev. E 85, 011301 (2012)

Behavior of pressure and viscosity at high densities for two-dimensional hard and soft granular materials

Authors: Michio Otsuki, Hisao Hayakawa, Stefan Luding

Abstract: The pressure and the viscosity in two-dimensional sheared granular assemblies are investigated numerically. The behavior of both pressure and viscosity is smoothly changing qualitatively when starting from a mono-disperse hard-disk system without dissipation and moving towards a system of (i) poly-disperse, (ii) soft particles with (iii) considerable dissipation. In the rigid, elastic limit of… ▽ More The pressure and the viscosity in two-dimensional sheared granular assemblies are investigated numerically. The behavior of both pressure and viscosity is smoothly changing qualitatively when starting from a mono-disperse hard-disk system without dissipation and moving towards a system of (i) poly-disperse, (ii) soft particles with (iii) considerable dissipation. In the rigid, elastic limit of mono-disperse systems, the viscosity is approximately inverse proportional to the area fraction difference from $φ_η \simeq 0.7$, but the pressure is still finite at $φ_η$. In moderately soft, dissipative and poly-disperse systems, on the other hand, we confirm the recent theoretical prediction that both scaled pressure (divided by the kinetic temperature $T$) and scaled viscosity (divided by $\sqrt{T}$) diverge at the same density, i.e., the jamming transition point $φ_J > φ_η$, with the exponents -2 and -3, respectively. Furthermore, we observe that the critical region of the jamming transition becomes invisible as the restitution coefficient approaches unity, i.e. for vanishing dissipation. In order to understand the conflict between these two different predictions on the divergence of the pressure and the viscosity, the transition from soft to hard particles is studied in detail and the dimensionless control parameters are defined as ratios of various time-scales. We introduce a dimensionless number, i.e. the ratio of dissipation rate and shear rate, that can identify the crossover from the scaling of very hard, i.e. rigid disks to the scaling in the soft, jamming regime. △ Less

Submitted 5 April, 2010; v1 submitted 2 February, 2010; originally announced February 2010.

Comments: 23 pages, 20 figures, to appear in Progress of Theoretical Physics Supplement

Journal ref: Progress of Theoretical Physics Supplement 184, 110 (2010)

Force Statistics and Correlations in Dense Granular Packings

Authors: Stefan Luding, Micha-Klaus Mueller, Thorsten Poeschel

Abstract: In dense, static, polydisperse granular media under isotropic pressure, the probability density and the correlations of particle-wall contact forces are studied. Furthermore, the probability density functions of the populations of pressures measured with different sized circular pressure cells is examined. The questions answered are: (i) What is the number of contacts that has to be considered s… ▽ More In dense, static, polydisperse granular media under isotropic pressure, the probability density and the correlations of particle-wall contact forces are studied. Furthermore, the probability density functions of the populations of pressures measured with different sized circular pressure cells is examined. The questions answered are: (i) What is the number of contacts that has to be considered so that the measured pressure lies within a certain error margin from its expectation value? (ii) What is the statistics of the pressure probability density as function of the size of the pressure cell? Astonishing non-random correlations between contact forces are evidenced, which range at least 10 to 15 particle diameter. Finally, an experiment is proposed to tackle and better understand this issue. △ Less

Submitted 14 December, 2009; originally announced December 2009.

Comments: 10 pages, 12 figures

Universality of shear-banding instability and crystallization in sheared granular fluid

Authors: Meheboob Alam, Priyanka Shukla, Stefan Luding

Abstract: The linear stability analysis of an uniform shear flow of granular materials is revisited using several cases of a Navier-Stokes'-level constitutive model in which we incorporate the global equation of states for pressure and thermal conductivity (which are accurate up-to the maximum packing density $ν_{m}$) and the shear viscosity is allowed to diverge at a density $ν_μ$ ($< ν_{m}$), with all o… ▽ More The linear stability analysis of an uniform shear flow of granular materials is revisited using several cases of a Navier-Stokes'-level constitutive model in which we incorporate the global equation of states for pressure and thermal conductivity (which are accurate up-to the maximum packing density $ν_{m}$) and the shear viscosity is allowed to diverge at a density $ν_μ$ ($< ν_{m}$), with all other transport coefficients diverging at $ν_{m}$. It is shown that the emergence of shear-banding instabilities (for perturbations having no variation along the streamwise direction), that lead to shear-band formation along the gradient direction, depends crucially on the choice of the constitutive model. In the framework of a dense constitutive model that incorporates only collisional transport mechanism, it is shown that an accurate global equation of state for pressure or a viscosity divergence at a lower density or a stronger viscosity divergence (with other transport coefficients being given by respective Enskog values that diverge at $ν_m$) can induce shear-banding instabilities, even though the original dense Enskog model is stable to such shear-banding instabilities. For any constitutive model, the onset of this shear-banding instability is tied to a {\it universal} criterion in terms of constitutive relations for viscosity and pressure, and the sheared granular flow evolves toward a state of lower "dynamic" friction, leading to the shear-induced band formation, as it cannot sustain increasing dynamic friction with increasing density to stay in the homogeneous state. A similar criterion of a lower viscosity or a lower viscous-dissipation is responsible for the shear-banding state in many complex fluids. △ Less

Submitted 15 November, 2008; originally announced November 2008.

Comments: 26 pages

Journal ref: Journal of Fluid Mechanics (2008), vol. 615, pp. 293-321

The Jamming Transition in Granular Systems

Authors: T. S. Majmudar, M. Sperl, S. Luding, R. P. Behringer

Abstract: Recent simulations have predicted that near jamming for collections of spherical particles, there will be a discontinuous increase in the mean contact number, Z, at a critical volume fraction, phi_c. Above phi_c, Z and the pressure, P are predicted to increase as power laws in phi-phi_c. In experiments using photoelastic disks we corroborate a rapid increase in Z at phi_c and power-law behavior… ▽ More Recent simulations have predicted that near jamming for collections of spherical particles, there will be a discontinuous increase in the mean contact number, Z, at a critical volume fraction, phi_c. Above phi_c, Z and the pressure, P are predicted to increase as power laws in phi-phi_c. In experiments using photoelastic disks we corroborate a rapid increase in Z at phi_c and power-law behavior above phi_c for Z and P. Specifically we find power-law increase as a function of phi-phi_c for Z-Z_c with an exponent beta around 0.5, and for P with an exponent psi around 1.1. These exponents are in good agreement with simulations. We also find reasonable agreement with a recent mean-field theory for frictionless particles. △ Less

Submitted 18 December, 2006; v1 submitted 23 October, 2006; originally announced October 2006.

Comments: 4 pages, 4 figures, 2 pages supplement; minor changes and clarifications, 2 addtl. refs., accepted for publication in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 98, 058001 (2007).

Transport coefficients for dense hard-disk systems

Authors: Ramón García-Rojo, Stefan Luding, J. Javier Brey

Abstract: A study of the transport coefficients of a system of elastic hard disks, based on the use of Helfand-Einstein expressions is reported. The self-diffusion, the viscosity, and the heat conductivity are examined with averaging techniques especially appropriate for the use in event-driven molecular dynamics algorithms with periodic boundary conditions. The density and size dependence of the results… ▽ More A study of the transport coefficients of a system of elastic hard disks, based on the use of Helfand-Einstein expressions is reported. The self-diffusion, the viscosity, and the heat conductivity are examined with averaging techniques especially appropriate for the use in event-driven molecular dynamics algorithms with periodic boundary conditions. The density and size dependence of the results is analyzed, and comparison with the predictions from Enskog's theory is carried out. In particular, the behavior of the transport coefficients in the vicinity of the fluid-solid transition is investigated and a striking power law divergence of the viscosity in this region is obtained, while all other examined transport coefficients show a drop in that density range. △ Less

Submitted 3 January, 2006; v1 submitted 28 November, 2005; originally announced November 2005.

Comments: submitted to PRE

A driven two-dimensional granular gas with Coulomb friction

Authors: Olaf Herbst, Raffaele Cafiero, Annette Zippelius, Hans Jürgen Herrmann, Stefan Luding

Abstract: We study a homogeneously driven granular gas of inelastic hard particles with rough surfaces subject to Coulomb friction. The stationary state as well as the full dynamic evolution of the translational and rotational granular temperatures are investigated as a function of the three parameters of the friction model. Four levels of approximation to the (velocity-dependent) tangential restitution a… ▽ More We study a homogeneously driven granular gas of inelastic hard particles with rough surfaces subject to Coulomb friction. The stationary state as well as the full dynamic evolution of the translational and rotational granular temperatures are investigated as a function of the three parameters of the friction model. Four levels of approximation to the (velocity-dependent) tangential restitution are introduced and used to calculate translational and rotational temperatures in a mean field theory. When comparing these theoretical results to numerical simulations of a randomly driven mono-layer of particles subject to Coulomb friction, we find that already the simplest model leads to qualitative agreement, but only the full Coulomb friction model is able to reproduce/predict the simulation results quantitatively for all magnitudes of friction. In addition, the theory predicts two relaxation times for the decay to the stationary state. One of them corresponds to the equilibration between the translational and rotational degrees of freedom. The other one, which is slower in most cases, is the inverse of the common relaxation rate of translational and rotational temperatures. △ Less

Submitted 10 January, 2005; originally announced January 2005.

Comments: 23 pages, 17 figures

Rheology of granular mixtures under uniform shear flow: Enskog kinetic theory versus molecular dynamics simulations

Authors: J. M. Montanero, V. Garzo, M. Alam, S. Luding

Abstract: The rheological properties for dilute and moderately dense granular binary mixtures of smooth, inelastic hard disks/spheres under uniform shear flow in steady state conditions are reported. The results are based on the Enskog kinetic theory, numerically solved by a dense gas extension of the Direct Simulation Monte Carlo method for dilute gases. These results are confronted to the ones also obta… ▽ More The rheological properties for dilute and moderately dense granular binary mixtures of smooth, inelastic hard disks/spheres under uniform shear flow in steady state conditions are reported. The results are based on the Enskog kinetic theory, numerically solved by a dense gas extension of the Direct Simulation Monte Carlo method for dilute gases. These results are confronted to the ones also obtained by performing molecular dynamics simulations with very good agreement for the lower densities and higher coefficients of restitution. It appears that the range of densities for which the Enskog equation applies decreases with increasing dissipation. △ Less

Submitted 22 November, 2004; originally announced November 2004.

Comments: 6 Figures

Journal ref: Granular Matter 8, 103 (2006)

Molecular dynamics and theory for the contact values of the radial distribution functions of hard-disk fluid mixtures

Authors: Stefan Luding, Andres Santos

Abstract: We report molecular dynamics results for the contact values of the radial distribution functions of binary additive mixtures of hard disks. The simulation data are compared with theoretical predictions from expressions proposed by Jenkins and Mancini [J. Appl. Mech. \textbf{54}, 27 (1987)] and Santos et al. [J. Chem. Phys. \textbf{117}, 5785 (2002)]. Both theories agree quantitatively within a v… ▽ More We report molecular dynamics results for the contact values of the radial distribution functions of binary additive mixtures of hard disks. The simulation data are compared with theoretical predictions from expressions proposed by Jenkins and Mancini [J. Appl. Mech. \textbf{54}, 27 (1987)] and Santos et al. [J. Chem. Phys. \textbf{117}, 5785 (2002)]. Both theories agree quantitatively within a very small margin, which renders the former still a very useful and simple tool to work with. The latter (higher-order and self-consistent) theory provides a small qualitative correction for low densities and is superior especially in the high-density domain. △ Less

Submitted 1 July, 2004; originally announced July 2004.

Comments: 9 pages, 6 figures

Journal ref: J. Chem. Phys. 121, 8458-8465 (2004)

The anisotropy of granular materials

Authors: F. Alonso-Marroquin, S. Luding, H. J. Herrmann

Abstract: The effect of the anisotropy on the elastoplastic response of two dimensional packed samples of polygons is investigated here, using molecular dynamics simulation. We show a correlation between fabric coefficients, characterizing the anisotropy of the granular skeleton, and the anisotropy of the elastic response. We also study the anisotropy induced by shearing on the subnetwork of the sliding c… ▽ More The effect of the anisotropy on the elastoplastic response of two dimensional packed samples of polygons is investigated here, using molecular dynamics simulation. We show a correlation between fabric coefficients, characterizing the anisotropy of the granular skeleton, and the anisotropy of the elastic response. We also study the anisotropy induced by shearing on the subnetwork of the sliding contacts. This anisotropy provides an explanation to some features of the plastic deformation of granular media. △ Less

Submitted 1 March, 2004; originally announced March 2004.

Comments: Submitted to PRE

Journal ref: Phys. Rev. E 71, 051304 (2005)

First normal stress difference and crystallization in a dense sheared granular fluid

Authors: Meheboob Alam, Stefan Luding

Abstract: The first normal stress difference (${\mathcal N}_1$) and the microstructure in a dense sheared granular fluid of smooth inelastic hard-disks are probed using event-driven simulations. While the anisotropy in the second moment of fluctuation velocity, which is a Burnett-order effect, is known to be the progenitor of normal stress differences in {\it dilute} granular fluids, we show here that the… ▽ More The first normal stress difference (${\mathcal N}_1$) and the microstructure in a dense sheared granular fluid of smooth inelastic hard-disks are probed using event-driven simulations. While the anisotropy in the second moment of fluctuation velocity, which is a Burnett-order effect, is known to be the progenitor of normal stress differences in {\it dilute} granular fluids, we show here that the collisional anisotropies are responsible for the normal stress behaviour in the {\it dense} limit. As in the elastic hard-sphere fluids, ${\mathcal N}_1$ remains {\it positive} (if the stress is defined in the {\it compressive} sense) for dilute and moderately dense flows, but becomes {\it negative} above a critical density, depending on the restitution coefficient. This sign-reversal of ${\mathcal N}_1$ occurs due to the {\it microstructural} reorganization of the particles, which can be correlated with a preferred value of the {\it average} collision angle $θ_{av}=π/4 \pm π/2$ in the direction opposing the shear. We also report on the shear-induced {\it crystal}-formation, signalling the onset of fluid-solid coexistence in dense granular fluids. Different approaches to take into account the normal stress differences are discussed in the framework of the relaxation-type rheological models. △ Less

Submitted 27 June, 2003; originally announced June 2003.

Comments: 21 pages, 13 figures

Journal ref: Physics of Fluids, vol. 15, No. 8, 2003