-
Precipitation in lean Mg-Zn-Ca alloys
Authors:
R. E. Schaublin,
M. Becker,
M. Cihova,
S. S. A. Gerstl,
D. Deiana,
C. Hebert,
S. Pogatscher,
P. J. Uggowitzer,
J. F. Loffler
Abstract:
While lean Mg-Zn-Ca alloys are promising materials for temporary implants, questions remain on the impact of Zn and Ca. In this context, the precipitation in Mg-1.5Zn-0.25Ca (ZX20, in wt.%) was investigated upon linear heating from about room temperature to 400 C, with a particular focus on the debated ternary precipitate phase. Three exothermic differential scanning calorimetry (DSC) peaks were o…
▽ More
While lean Mg-Zn-Ca alloys are promising materials for temporary implants, questions remain on the impact of Zn and Ca. In this context, the precipitation in Mg-1.5Zn-0.25Ca (ZX20, in wt.%) was investigated upon linear heating from about room temperature to 400 C, with a particular focus on the debated ternary precipitate phase. Three exothermic differential scanning calorimetry (DSC) peaks were observed at 125, 250 and 320 C. The microstructure at the end of these peaks (205, 260 and 350 C) was probed in a multiscale correlative approach using atom probe tomography (APT) and transmission electron microscopy (TEM). At 205 C, APT analysis revealed Ca-rich, Zn-rich and Zn-Ca-rich clusters of about 3 nm in size and with a number density of 5.7 x 10^23 m^-3. At 260 C, APT and TEM showed mono-layered Zn-Ca-rich Guinier-Preston (GP) zones of about 8 nm in size and with a number density of 1.3 x 10^23 m^-3. At 350 C, there are larger, highly coherent elongated precipitates of about 50 nm in size, in a lower number density, and of two types: either binary Mg2Ca precipitates or less numerous ternary Ca2Mg6Zn3 precipitates, as deduced from scanning TEM-based energy dispersive X-ray spectrometry (EDS) and nanodiffraction in TEM. The highest hardening, probed by Vickers testing, relates to the end of the 125 C DSC peak and thus to GP zones, which outperform the hardening induced by the nanoscale clusters and the larger intermetallic particles. Precipitation in ZX20 upon linear heating was compared to the one induced by hot extrusion at 330 C. Here, ternary precipitates outnumber the binary ones and are larger, incoherent, and in a much lower number density. They are unequivocally made of hexagonal Ca2Mg5Zn5, as deduced by atomically resolved EDS mapping and scanning TEM imaging, and supported by simulations. Precipitation complexity of in lean Mg-Zn-Ca alloys and its kinetic path are discussed.
△ Less
Submitted 10 October, 2021;
originally announced October 2021.
-
Quantifying Photoinduced Polaronic Distortions in Inorganic Lead Halide Perovskites Nanocrystals
Authors:
Oliviero Cannelli,
Nicola Colonna,
Michele Puppin,
Thomas Rossi,
Dominik Kinschel,
Ludmila Leroy,
Janina Loeffler,
Anne Marie March,
Gilles Doumy,
Andre Al Haddad,
Ming-Feng Tu,
Yoshiaki Kumagai,
Donald Walko,
Grigory Smolentsev,
Franziska Krieg,
Simon C. Boehme,
Maksym V. Kovalenko,
Majed Chergui,
Giulia F. Mancini
Abstract:
The development of next generation perovskite-based optoelectronic devices relies critically on the understanding of the interaction between charge carriers and the polar lattice in out-of-equilibrium conditions. While it has become increasingly evident for CsPbBr3 perovskites that the Pb-Br framework flexibility plays a key role in their light-activated functionality, the corresponding local stru…
▽ More
The development of next generation perovskite-based optoelectronic devices relies critically on the understanding of the interaction between charge carriers and the polar lattice in out-of-equilibrium conditions. While it has become increasingly evident for CsPbBr3 perovskites that the Pb-Br framework flexibility plays a key role in their light-activated functionality, the corresponding local structural rearrangement has not yet been unambiguously identified. In this work, we demonstrate that the photoinduced lattice changes in the system are due to a specific polaronic distortion, associated with the activation of a longitudinal optical phonon mode at 18 meV by electron-phonon coupling, and we quantify the associated structural changes with atomic-level precision. Key to this achievement is the combination of time-resolved and temperature-dependent studies at Br K-edge and Pb L3-edge X-ray absorption with refined ab-initio simulations, which fully account for the screened core-hole final state effects on the X-ray absorption spectra. From the temporal kinetics, we show that carrier recombination reversibly unlocks the structural deformation at both Br and Pb sites. The comparison with the temperature-dependent XAS results rules out thermal effects as the primary source of distortion of the Pb-Br bonding motif during photoexcitation. Our work provides a comprehensive description of the CsPbBr3 perovskites photophysics, offering novel insights on the light-induced response of the system and its exceptional optoelectronic properties.
△ Less
Submitted 3 March, 2021;
originally announced March 2021.
-
Temperature dependence of magnetization processes in Sm(Co,Fe,Cu,Zr)$_z$ magnets with different nanoscale microstructures
Authors:
Leonardo Pierobon,
Robin E. Schäublin,
András Kovács,
Stephan S. A. Gerstl,
Alexander Firlus,
Urs V. Wyss,
Rafal E. Dunin-Borkowski,
Michalis Charilaou,
Jörg F. Löffler
Abstract:
The characteristic microstructure of Sm(Co,Fe,Cu,Zr)$_z$ alloys with SmCo$_5$ cell walls in Sm$_2$Co$_{17}$ cells, all intersected by Zr-rich platelets, makes them some of the best performing high-temperature permanent magnets. Plentiful research has been performed to tailor the microstructure at the nanoscale, but due to its complexity many questions remain unanswered about the effect of the indi…
▽ More
The characteristic microstructure of Sm(Co,Fe,Cu,Zr)$_z$ alloys with SmCo$_5$ cell walls in Sm$_2$Co$_{17}$ cells, all intersected by Zr-rich platelets, makes them some of the best performing high-temperature permanent magnets. Plentiful research has been performed to tailor the microstructure at the nanoscale, but due to its complexity many questions remain unanswered about the effect of the individual phases on the magnetic performance at different temperatures. Here, we explore this mechanism effect for three different Sm(Co,Fe,Cu,Zr)$_z$ alloys by deploying high-resolution magnetic imaging via in-situ transmission electron microscopy and three-dimensional chemical analysis using atom probe tomography. We show that their microstructures differ in terms of SmCo$_5$ cell-wall and Z-phase size and density, as well as the Cu concentration in the cell walls, and demonstrate how these features influence the magnetic domain size and density and thus form different magnetic textures. Moreover, we illustrate that the dominant coercivity mechanism at room temperature is domain-wall pinning and show that magnets with a denser cell-wall network, a steeper Cu gradient across the cell-wall boundary, and thinner Z-phase platelets have a higher coercivity. We also show that the coercivity mechanism at high temperatures is domain-wall nucleation at the cell walls. Increasing the Cu concentration inside the cell walls decreases the transition temperature between pinning and nucleation, significantly decreasing the coercivity with increasing temperature. We therefore provide a detailed explanation of how the microstructure on the atomic to nanoscale directly affects the magnetic performance and provide detailed guidelines for an improved design of Sm(Co,Fe,Cu,Zr)$_z$ magnets.
△ Less
Submitted 28 January, 2021;
originally announced January 2021.
-
Tuneable terahertz oscillation arising from Bloch-point dynamics in chiral magnets
Authors:
Yu Li,
Leonardo Pierobon,
Michalis Charilaou,
Hans-Benjamin Braun,
Niels R. Walet,
Jörg F. Löffler,
James J. Miles,
Christoforos Moutafis
Abstract:
Skyrmionic textures are being extensively investigated due to the occurrence of novel topological magnetic phenomena and their promising applications in a new generation of spintronic devices that take advantage of the robust topological stability of their spin structures. The development of practical devices relies on a detailed understanding of how skyrmionic structures can be formed, transferre…
▽ More
Skyrmionic textures are being extensively investigated due to the occurrence of novel topological magnetic phenomena and their promising applications in a new generation of spintronic devices that take advantage of the robust topological stability of their spin structures. The development of practical devices relies on a detailed understanding of how skyrmionic structures can be formed, transferred, detected and annihilated. In this work, our considerations go beyond static skyrmions and theoretically show that the formation/annihilation of both skyrmions and antiskyrmions is enabled by the transient creation and propagation of topological singularities (magnetic monopole-like Bloch points). Critically, during the winding/unwinding of skyrmionic textures, our results predict that the Bloch-point propagation will give rise to an emergent electric field in a terahertz frequency range and with substantial amplitude. We also demonstrate ways for controlling Bloch-point dynamics, which directly enable the tuneability on both frequency and amplitude of this signal. Our studies provide a concept of directly exploiting topological singularities for terahertz skyrmion-based electronic devices.
△ Less
Submitted 28 November, 2019;
originally announced November 2019.
-
Unconventional magnetization textures and domain-wall pinning in Sm-Co magnets
Authors:
Leonardo Pierobon,
András Kovács,
Robin E. Schäublin,
S. S. A. Gerstl,
J. Caron,
Urs Wyss,
Rafal E. Dunin-Borkowski,
Jörg F. Löffler,
Michalis Charilaou
Abstract:
The most powerful magnets for high temperature applications are Sm-Co-based alloys with a microstructure that combines magnetically soft and hard regions. The microstructure consists of a dense domain-wall-pinning network that endows the material with remarkable magnetic hardness. A precise understanding of the coupling between magnetism and microstructure is essential for enhancing the performanc…
▽ More
The most powerful magnets for high temperature applications are Sm-Co-based alloys with a microstructure that combines magnetically soft and hard regions. The microstructure consists of a dense domain-wall-pinning network that endows the material with remarkable magnetic hardness. A precise understanding of the coupling between magnetism and microstructure is essential for enhancing the performance of Sm-Co magnets, but experiments and theory have not yet converged to a unified model. Here, we combine transmission electron microscopy, atom probe tomography, and nanometer-resolution off-axis electron holography with micromagnetic simulations to show that the magnetization processes in Sm-Co magnets result from an interplay between curling instabilities and pinning effects at the intersections between magnetically soft and hard regions. We also find that topologically non-trivial magnetic domains separated by a complex network of domain walls play a key role in the magnetic state. Our findings reveal a previously hidden aspect of magnetism and provide insight into the full potential of high-performance magnetic materials.
△ Less
Submitted 14 October, 2019; v1 submitted 7 January, 2019;
originally announced January 2019.
-
Pushing the limits of magnetic anisotropy in the Sm-Co system
Authors:
S. Y. Jekal,
J. F. Loeffler,
M. Charilaou
Abstract:
Materials based on the Sm-Co system exhibit remarkable magnetic performance due to their high Curie temperature, large saturation magnetization, and strong magnetic anisotropy, which are the result of the electronic structure in Co and Sm and their arrangement in the hexagonal lattice. In this paper we show, using first-principles calculations, mean-field theory, and atomistic Monte Carlo simulati…
▽ More
Materials based on the Sm-Co system exhibit remarkable magnetic performance due to their high Curie temperature, large saturation magnetization, and strong magnetic anisotropy, which are the result of the electronic structure in Co and Sm and their arrangement in the hexagonal lattice. In this paper we show, using first-principles calculations, mean-field theory, and atomistic Monte Carlo simulations that slight modifications of the SmCo5 crystal structure, induced by strain or partial substitution of Sm by Ce, change the exchange interaction energy and increase the magnetocrystalline anisotropy energy drastically. This finding shows how small changes in local-structure environments lead to substantial changes in macroscopic properties and enables the optimization of high-performance materials at the atomic level.
△ Less
Submitted 24 July, 2018;
originally announced July 2018.
-
Skyrmion Lattice Collapse and Defect-Induced Melting in Chiral Magnetic Films
Authors:
Leonardo Pierobon,
Christoforos Moutafis,
Yu Li,
Jörg F. Löffler,
Michalis Charilaou
Abstract:
Magnetic phase transitions are a test bed for exploring the physics of non-equilibrium phenomena in condensed matter, which become even more complex when topological constraints are involved. In particular, the investigation of skyrmions and skyrmion lattices offers insight into fundamental processes of topological-charge creation and annihilation upon changing the magnetic state. Nonetheless, the…
▽ More
Magnetic phase transitions are a test bed for exploring the physics of non-equilibrium phenomena in condensed matter, which become even more complex when topological constraints are involved. In particular, the investigation of skyrmions and skyrmion lattices offers insight into fundamental processes of topological-charge creation and annihilation upon changing the magnetic state. Nonetheless, the exact physical mechanisms behind these phase transitions remain unresolved. Here, we have systematically compared ultra-thin films with isotropic and anisotropic Dzyaloshinskii-Moriya interactions (DMI), demonstrating a nearly identical behavior in technologically relevant materials such as interfacial systems. We numerically show that in perfect systems skyrmion lattices can be inverted in a field-induced first-order phase transition. The existence of even a single defect, however, replaces the inversion with a second-order phase transition of defect-induced lattice melting. This radical change in the system's behavior from a first-order to a second-order phase transition signifies the importance of such an analysis for all realistic systems in order to correctly interpret experimental data. Our results shed light on complex topological charge annihilation mechanisms that mediate transitions between magnetic states and pave the way for an experimental realization of these phenomena.
△ Less
Submitted 25 May, 2018;
originally announced May 2018.
-
Emergent electromagnetism induced by topological defects created during magnetization reversal in nanowires
Authors:
M. Charilaou,
H. -B. Braun,
J. F. Loeffler
Abstract:
We report that the irreversible magnetization switching process in ferromagnetic nanoparticles is governed by the formation and dynamics of topological point-defects in the form of hedgehog-antihedgehog pairs. After nucleation, these pairs rapidly separate with speeds exceeding domain wall velocities, and they generate an emergent electric field of solenoidal character and substantial magnitude.
We report that the irreversible magnetization switching process in ferromagnetic nanoparticles is governed by the formation and dynamics of topological point-defects in the form of hedgehog-antihedgehog pairs. After nucleation, these pairs rapidly separate with speeds exceeding domain wall velocities, and they generate an emergent electric field of solenoidal character and substantial magnitude.
△ Less
Submitted 9 November, 2017;
originally announced November 2017.
-
Spontaneous skyrmion chains in nanorods with chiral interactions
Authors:
Michalis Charilaou,
Jörg F. Löffler
Abstract:
We report that in cylindrical nanorods skyrmion chains, i.e., three-dimensional spin textures, emerge dynamically, as revealed by micromagnetic simulations. The skyrmion-chain state occurs when the diameter of the rod is larger than the helical pitch length of the material, and the number of skyrmions on the chain is proportional to the length of the nanorod. This finding provides a deeper underst…
▽ More
We report that in cylindrical nanorods skyrmion chains, i.e., three-dimensional spin textures, emerge dynamically, as revealed by micromagnetic simulations. The skyrmion-chain state occurs when the diameter of the rod is larger than the helical pitch length of the material, and the number of skyrmions on the chain is proportional to the length of the nanorod. This finding provides a deeper understanding of the interplay between geometry and skyrmionic symmetry, and shows how spatial confinement can stabilize spontaneous topological spin textures.
△ Less
Submitted 6 April, 2016;
originally announced April 2016.
-
Local structural excitations in model glasses
Authors:
S. Swayamjyoti,
P. M. Derlet,
J. F. Löffler
Abstract:
Structural excitations of model Lennard-Jones glass systems are investigated using the Activation-Relaxation-Technique (ART), which explores the potential energy landscape of a local minimum energy configuration by converging to a nearby saddle-point configuration. Performing ART results in a distribution of barrier energies that is single-peaked for well relaxed samples. The present work characte…
▽ More
Structural excitations of model Lennard-Jones glass systems are investigated using the Activation-Relaxation-Technique (ART), which explores the potential energy landscape of a local minimum energy configuration by converging to a nearby saddle-point configuration. Performing ART results in a distribution of barrier energies that is single-peaked for well relaxed samples. The present work characterises such atomic scale excitations in terms of their local structure and environment. It is found that, at zero applied stress, many of the identified events consist of chain-like excitations that can either be extended or ring-like in their geometry. The location and activation energy of these saddle-point structures are found to correlate with the type of atom involved, and with spatial regions that have low shear moduli and are close to the excess free volume within the configuration. Such correlations are however weak and more generally the identified local structural excitations are seen to exist throughout the model glass sample. The work concludes with a discussion within the framework of $α$ and $β$ relaxation processes that are known to occur in the under-cooled liquid regime.
△ Less
Submitted 26 November, 2013;
originally announced November 2013.
-
Magnetoelastic coupling in triangular lattice antiferromagnet CuCrS2
Authors:
Julia C. E. Rasch,
Martin Boehm,
Clemens Ritter,
Hannu Mutka,
Jürg Schefer,
Lukas Keller,
Galina M. Abramova,
Antonio Cervellino,
Jörg F. Löffler
Abstract:
CuCrS2 is a triangular lattice Heisenberg antiferromagnet with a rhombohedral crystal structure. We report on neutron and synchrotron powder diffraction results which reveal a monoclinic lattice distortion at the magnetic transition and verify a magnetoelastic coupling. CuCrS2 is therefore an interesting material to study the influence of magnetism on the relief of geometrical frustration.
CuCrS2 is a triangular lattice Heisenberg antiferromagnet with a rhombohedral crystal structure. We report on neutron and synchrotron powder diffraction results which reveal a monoclinic lattice distortion at the magnetic transition and verify a magnetoelastic coupling. CuCrS2 is therefore an interesting material to study the influence of magnetism on the relief of geometrical frustration.
△ Less
Submitted 28 July, 2009;
originally announced July 2009.
-
Structural properties of Pb3Mn7O15 determined from high-resolution synchrotron powder diffraction
Authors:
J. C. E. Rasch,
D. V. Sheptyakov,
J. Schefer,
L. Keller,
M. Böhm,
F. Gozzo,
N. V. Volkov,
K. A. Sablina,
G. A. Petrakovskii,
H. Grimmer,
K. Conder,
J. F. Löffler
Abstract:
We report on the crystallographic structure of the layered compound Pb3Mn7O15. Previous analysis based on laboratory X-ray data at room temperature gave contradictory results in terms of the description of the unit cell. Motivated by recent magnetic bulk measurements of this system, we re-investigated the chemical structure with high-resolution synchrotron powder diffraction at temperatures betw…
▽ More
We report on the crystallographic structure of the layered compound Pb3Mn7O15. Previous analysis based on laboratory X-ray data at room temperature gave contradictory results in terms of the description of the unit cell. Motivated by recent magnetic bulk measurements of this system, we re-investigated the chemical structure with high-resolution synchrotron powder diffraction at temperatures between 15 K and 295 K. Our results show that the crystal structure of stoichiometric Pb3Mn7O15 has a pronounced 2-dimensional character and can be described in the orthorhombic space group Pnma.
△ Less
Submitted 29 October, 2008;
originally announced October 2008.
