-
Vibrational modes as the origin of dielectric loss at 0.27$\unicode{x2013}$100 THz in a-SiC:H
Authors:
B. T. Buijtendorp,
A. Endo,
W. Jellema,
K. Karatsu,
K. Kouwenhoven,
D. Lamers,
A. J. van der Linden,
K. Rostem,
M. Veen,
E. J. Wollack,
J. J. A. Baselmans,
S. Vollebregt
Abstract:
Low-loss deposited dielectrics are beneficial for the advancement of superconducting integrated circuits for astronomy. In the microwave band ($\mathrm{\sim}$1$\unicode{x2013}$10 GHz) the cryogenic and low-power dielectric loss is dominated by two-level systems. However, the origin of the loss in the millimeter-submillimeter band ($\mathrm{\sim}$0.1$\unicode{x2013}$1 THz) is not understood. We mea…
▽ More
Low-loss deposited dielectrics are beneficial for the advancement of superconducting integrated circuits for astronomy. In the microwave band ($\mathrm{\sim}$1$\unicode{x2013}$10 GHz) the cryogenic and low-power dielectric loss is dominated by two-level systems. However, the origin of the loss in the millimeter-submillimeter band ($\mathrm{\sim}$0.1$\unicode{x2013}$1 THz) is not understood. We measured the loss of hydrogenated amorphous SiC (a-SiC:H) films in the 0.27$\unicode{x2013}$100 THz range using superconducting microstrip resonators and Fourier-transform spectroscopy. The agreement between the loss data and a Maxwell-Helmholtz-Drude dispersion model suggests that vibrational modes above 10 THz dominate the loss in the a-SiC:H above 200 GHz.
△ Less
Submitted 18 May, 2025; v1 submitted 22 May, 2024;
originally announced May 2024.
-
Fe3Se4: A Possible Ferrimagnetic Half-Metal?
Authors:
Girish C. Tewari,
Divya Srivastava,
Reijo Pohjonen,
Otto Mustonen,
Antti J. Karttunen,
Johan Lindén,
Maarit Karppinen
Abstract:
Half-metallic ferromagnets show 100% spin-polarization at the Fermi level and are ideal candidates for spintronic applications. Despite the extensive research in the field, very few materials have been discovered so far. Here we present results of electronic band structure calculations based on density functional theory and extensive physical-property measurements for Fe3Se4 revealing signatures o…
▽ More
Half-metallic ferromagnets show 100% spin-polarization at the Fermi level and are ideal candidates for spintronic applications. Despite the extensive research in the field, very few materials have been discovered so far. Here we present results of electronic band structure calculations based on density functional theory and extensive physical-property measurements for Fe3Se4 revealing signatures of half-metallicity. The spin-polarized electronic band structure calculations predict half-metallic ferrimagnetism for Fe3Se4. The electrical resistivity follows exponentially suppressed electron-magnon scattering mechanism in the low-temperature regime and show a magnetoresistance effect that changes the sign from negative to positive with decreasing temperature around 100 K. Other intriguing observations include the anomalous behavior of Hall resistance below 100 K and an anomalous Hall coefficient that roughly follows the \r{ho}2 behavior.
△ Less
Submitted 9 July, 2020;
originally announced July 2020.
-
Development of TES-based detectors array for the X-ray Integral Field Unit (X-IFU) on the future x-ray observatory ATHENA
Authors:
Luciano Gottardi,
Hiroki Akamatsu,
Didier Barret,
Marcel P. Bruijn,
Roland H. den Hartog,
Jan-Willem den Herder,
Henk F. C. Hoevers,
Mikko Kiviranta,
Jan van der Kuur,
Anton J. van der Linden,
Brian D. Jackson,
Madu Jambunathan,
Marcel L. Ridder
Abstract:
We are developing transition-edge sensor (TES)-based microcalorimeters for the X-ray Integral Field Unit (XIFU) of the future European X-Ray Observatory Athena. The microcalorimeters are based on TiAu TESs coupled to 250μm squared, AuBi absorbers. We designed and fabricated devices with different contact geometries between the absorber and the TES to optimise the detector performance and with diff…
▽ More
We are developing transition-edge sensor (TES)-based microcalorimeters for the X-ray Integral Field Unit (XIFU) of the future European X-Ray Observatory Athena. The microcalorimeters are based on TiAu TESs coupled to 250μm squared, AuBi absorbers. We designed and fabricated devices with different contact geometries between the absorber and the TES to optimise the detector performance and with different wiring topology to mitigate the self-magnetic field. The design is tailored to optimise the performance under Frequency Domain Multiplexing. In this paper we review the main design feature of the pixels array and we report on the performance of the 18 channels, 2-5MHz frequency domain multiplexer that will be used to characterised the detector array.
△ Less
Submitted 2 April, 2016;
originally announced April 2016.
-
Josephson effects in an alternating current biased transition edge sensor
Authors:
Luciano Gottardi,
Alex Kozorezov,
Hiroki Akamatsu,
Jan van der Kuur,
Marcel P. Bruijn,
Roland H. den Hartog,
Richard Hijmering,
Pourya Khosropanah,
Colin Lambert,
Anton. J. van der Linden,
Marcel L. Ridder,
Toyo Suzuki,
Jan R. Gao
Abstract:
We report the experimental evidence of the ac Josephson effect in a transition edge sensor (TES) operating in a frequency domain multiplexer and biased by ac voltage at MHz frequencies. The effect is observed by measuring the non-linear impedance of the sensor. The TES is treated as a weakly linked superconducting system and within the resistively shunted junction model framework. We provide a ful…
▽ More
We report the experimental evidence of the ac Josephson effect in a transition edge sensor (TES) operating in a frequency domain multiplexer and biased by ac voltage at MHz frequencies. The effect is observed by measuring the non-linear impedance of the sensor. The TES is treated as a weakly linked superconducting system and within the resistively shunted junction model framework. We provide a full theoretical explanation of the results by finding the analytic solution of the non-inertial Langevian equation of the system and calculating the non-linear response of the detector to a large ac bias current in the presence of noise.
△ Less
Submitted 2 April, 2016;
originally announced April 2016.
-
Observation of lattice softening at $T_{\rm c}$ in the FeSe$_{0.5}$Te$_{0.5}$ superconductor
Authors:
J. Lindén,
J. -P. Libäck,
M. Karppinen,
E. -L. Rautama,
H. Yamauchi
Abstract:
Polycrystalline samples of FeSe$_{0.5}$Te$_{0.5}$ were synthesized using a conventional solid-state reaction method. The onset of bulk superconductivity transition was confirmed by SQUID magnetometry at 12.5~K. $^{57}$Fe Mössbauer spectra in transmission geometry were recorded at temperatures between 6.0 and 320 K. Both the isomer shift and the total absorption started to drop about $T_c$, indicat…
▽ More
Polycrystalline samples of FeSe$_{0.5}$Te$_{0.5}$ were synthesized using a conventional solid-state reaction method. The onset of bulk superconductivity transition was confirmed by SQUID magnetometry at 12.5~K. $^{57}$Fe Mössbauer spectra in transmission geometry were recorded at temperatures between 6.0 and 320 K. Both the isomer shift and the total absorption started to drop about $T_c$, indicating a softening of the lattice. The drop is estimated to correspond to at least 60~K from the original Debye temperature $θ_{\rm D}\approx 460$~K. Seebeck measurements indicate that the samples are $n$-type conductors at low temperatures with a cross-over to $p$-type conductivity around 135 K. The zero Seebeck coefficient is seen below $10.6$~K.
△ Less
Submitted 10 August, 2010;
originally announced August 2010.
-
Structural and magnetic properties of MSr2Y1.5Ce0.5Cu2Oz (M-1222) compounds with M = Fe and Co
Authors:
V. P. S. Awana,
Anurag Gupta,
H. Kishan,
S. K. Malik,
W. B. Yelon,
J. Linden,
M. Karppinen,
H. Yamauchi
Abstract:
MSr2Y1.5Ce0.5Cu2Oz (M-1222) compounds, with M = Fe and Co, have been synthesized through a solid-state reaction route. Both compounds crystallize in a tetragonal structure (space group I4/mmm). A Rietveld structural refinement of room-temperature neutron diffraction data for Fe-1222 reveals that nearly half the Fe remains at the M site, while the other half goes to the Cu site in the CuO2 planes…
▽ More
MSr2Y1.5Ce0.5Cu2Oz (M-1222) compounds, with M = Fe and Co, have been synthesized through a solid-state reaction route. Both compounds crystallize in a tetragonal structure (space group I4/mmm). A Rietveld structural refinement of room-temperature neutron diffraction data for Fe-1222 reveals that nearly half the Fe remains at the M site, while the other half goes to the Cu site in the CuO2 planes. Existence of Fe at two different lattice sites, is also confirmed by 57Fe Mossbauer spectroscopy from which it is inferred that nearly 50% of the total Fe occupies the Cu site in the CuO2 planes as Fe3+, whereas the other 50 % is located at the M site with nearly 40 % as Fe4+ and around 10% as Fe3+. For the M = Co compound, nearly 84 % of Co remains at its designated M site, while the rest occupies the Cu site in the CuO2 planes. The oxygen content, z, based on oxygen occupancies refined from the neutron diffraction data, comes close to 9.0 for both the samples The ZFC and FC magnetization curves as a function of temperature show a complex behavior for both Fe-1222 and Co-1222 compounds.
△ Less
Submitted 14 October, 2003;
originally announced October 2003.
-
Iron and molybdenum valences in double-perovskite (Sr,Nd)2FeMoO6: electron-doping effect
Authors:
J. Linden,
T. Shimada,
T. Motohashi,
H. Yamauchi,
M. Karppinen
Abstract:
Double perovskite, (Sr1-xNdx)2FeMoO6, was doped with electrons through partial substitution of divalent Sr by trivalent Nd (0 < x < 0.2). The Fe valence and the degree of B-site order were probed by 57Fe Mossbauer spectroscopy. Replacing Sr by Nd increased the fraction of Fe and Mo atoms occupying wrong sites, i.e. antisite disorder. It had very little effect on the Fe valence: a small but visib…
▽ More
Double perovskite, (Sr1-xNdx)2FeMoO6, was doped with electrons through partial substitution of divalent Sr by trivalent Nd (0 < x < 0.2). The Fe valence and the degree of B-site order were probed by 57Fe Mossbauer spectroscopy. Replacing Sr by Nd increased the fraction of Fe and Mo atoms occupying wrong sites, i.e. antisite disorder. It had very little effect on the Fe valence: a small but visible increase in the isomer shift was seen for the mixed-valent FeII/III atoms occupying the right site indicating a slight movement towards divalency of these atoms, which was more than counterbalanced by the increase in the fraction of antisite Fe atoms with III valence state. It is therefore argued that the bulk of the electron doping is received by antisite Mo atoms, which - being surrounded by six MoV/VI atoms - prefer the lower IV/V valence state. Thus under Nd substitution, the charge-neutrality requirement inflicts a lattice disorder such that low-valent MoIV/V can exist.
△ Less
Submitted 16 September, 2003;
originally announced September 2003.
-
Measuring thermal conductivity in extreme conditions: sub-Kelvin temperatures and high (27 T) magnetic fields
Authors:
P. J. E. M. van der Linden,
K. Behnia
Abstract:
We present a one-heater-two-thermometer set-up for measuring thermal conductivity and electric resistivity of a bulk sample at low temperatures down to 0.1 K and in magnetic fields up to 27 Tesla. The design overcomes the difficulties emerging in the context of large water-cooled resistive magnets.
We present a one-heater-two-thermometer set-up for measuring thermal conductivity and electric resistivity of a bulk sample at low temperatures down to 0.1 K and in magnetic fields up to 27 Tesla. The design overcomes the difficulties emerging in the context of large water-cooled resistive magnets.
△ Less
Submitted 6 August, 2003;
originally announced August 2003.
-
The valence state of iron in the Sr2Fe(Mo,W,Ta)O6.0 double-perovskite system: An Fe K-edge and L2,3-edge XANES study
Authors:
M. Karppinen,
H. Yamauchi,
Y. Yasukawa,
J. Linden,
T. S. Chan,
R. S. Liu,
J. M. Chen
Abstract:
Here we employ both Fe K and L2,3 edge x-ray absorption near-edge structure (XANES) spectroscopy techniques to clarify that iron in the B-site ordered double-perovskite halfmetal, Sr2FeMoO6.0, possesses a mixed-valence state, FeII/III, and accordingly molybdenum a mixed MoV/VI valence state. A reliable interpretation of the spectral features has been made possible by using a series of samples of…
▽ More
Here we employ both Fe K and L2,3 edge x-ray absorption near-edge structure (XANES) spectroscopy techniques to clarify that iron in the B-site ordered double-perovskite halfmetal, Sr2FeMoO6.0, possesses a mixed-valence state, FeII/III, and accordingly molybdenum a mixed MoV/VI valence state. A reliable interpretation of the spectral features has been made possible by using a series of samples of the Sr2Fe(Mo,W/Ta)O6.0 system. Replacing MoV/VI gradually with WVI causes increasing amount of Fe to adopt the FeII state, whereas TaV substitution shifts the valence of iron towards FeIII. As the valence of Fe increases from II to III in the Sr2Fe(Mo,W/Ta)O6.0 system, the absorption energy at the Fe K-edge gradually shifts towards the higher energy side. Similarly, in the L2,3-edge XANES spectra intermediate spectral features are revealed for the Sr2FeMoO6.0 sample in comparison with those for samples heavily substituted with either W or Ta.
△ Less
Submitted 31 July, 2003;
originally announced July 2003.
-
Iron valence in double-perovskite (Ba,Sr,Ca)2FeMoO6: Isovalent substitution effect
Authors:
Y. Yasukawa,
M. Karppinen,
J. Linden,
T. S. Chan,
R. S. Liu,
H. Yamauchi
Abstract:
In the Fe-Mo based B-site ordered double-perovskite, A2FeMoO6.0, with iron in the mixed-valence II/III state, the valence value of Fe is not precisely fixed at 2.5 but may be fine-tuned by means of applying chemical pressure at the A-cation site. This is shown through a systematic 57Fe Mossbauer spectroscopy study using a series of A2FeMoO6.0 [A = (Ba,Sr) or (Sr,Ca)] samples with high degree of…
▽ More
In the Fe-Mo based B-site ordered double-perovskite, A2FeMoO6.0, with iron in the mixed-valence II/III state, the valence value of Fe is not precisely fixed at 2.5 but may be fine-tuned by means of applying chemical pressure at the A-cation site. This is shown through a systematic 57Fe Mossbauer spectroscopy study using a series of A2FeMoO6.0 [A = (Ba,Sr) or (Sr,Ca)] samples with high degree of Fe/Mo order, the same stoichiometric oxygen content and also almost the same grain size. The isomer shift values and other hyperfine parameters obtained from the Mossbauer spectra confirm that Fe remains in the mixed-valence state within the whole range of A constituents. However, upon increasing the average cation size at the A site the precise valence of Fe is found to decrease such that within the A = (Ba,Sr) regime the valence of Fe is closer to II, while within the A = (Sr,Ca) regime it is closer to the actual mixed-valence II/III state. As the valence of Fe approaches II, the difference in charges between Fe and Mo increases, and parallel with this the degree of Fe/Mo order increases. Additionally, for the less-ordered samples an increased tendency of clustering of the anti-site Fe atoms is deduced from the Mossbauer data.
△ Less
Submitted 29 May, 2003;
originally announced May 2003.
