-
Synthesis of spherical mesoporous silica beads with tunable size, stiffness and porosity
Authors:
M. Milani,
K. Ahmad,
E. Cavalletti,
C. Ligoure,
L. Cipelletti,
M. Kongkaew,
P. Trens,
L. Ramos
Abstract:
We present an innovative template-free water-based sol-gel method to produce uniform mesoporous silica beads of millimeter size, which have tunable size, stiffness and porosity, and could be used for adsorption applications. Our protocol exploits an in-situ enzymatic reaction to produce spherical beads of hydrogel from a charge-stabilized suspension of silica nanoparticles confined in a millimetri…
▽ More
We present an innovative template-free water-based sol-gel method to produce uniform mesoporous silica beads of millimeter size, which have tunable size, stiffness and porosity, and could be used for adsorption applications. Our protocol exploits an in-situ enzymatic reaction to produce spherical beads of hydrogel from a charge-stabilized suspension of silica nanoparticles confined in a millimetric drop suspended in a non-miscible oil. Once the gelation step is complete, the spherical bead of gel is cleaned from oil and deposited onto a hydrophobic surface and let dry. Separating the gelation to the drying steps ensures a spatially uniform gel and allows us to perform a solvent exchange before drying. For all beads, we observe a crack-free drying process leading to the formation of stiff quasi-spherical beads with diameter in the range 1 to 5 mm and Young modulus in the range $(0.1-2)$ GPa and narrow pore size distribution, centered around $10$ to $25$ nm depending on the experimental conditions. Finally, to demonstrate the potentiality of these materials, we graft on the bead surface aminosilane molecules, and quantify their CO$_2$ adsorption efficiency. Overall, the production method we have developed is simple, readily adaptable, and offers promising materials for adsorption, storage, catalysis and chromatography.
△ Less
Submitted 31 January, 2025;
originally announced January 2025.
-
Instabilities in freely expanding sheets of associating viscoelastic fluids
Authors:
S. Arora,
A. Louhichi,
D. Vlassopoulos,
C. Ligoure,
L. Ramos
Abstract:
We use the impact of drops on a small solid target as a tool to investigate the behavior of viscoelastic fluids under extreme deformation rates. We study two classes of transient networks: semidilute solutions of supramolecular polymers and suspensions of spherical oil droplets reversibly linked by polymers. The two types of samples display very similar linear viscoelastic properties, which can be…
▽ More
We use the impact of drops on a small solid target as a tool to investigate the behavior of viscoelastic fluids under extreme deformation rates. We study two classes of transient networks: semidilute solutions of supramolecular polymers and suspensions of spherical oil droplets reversibly linked by polymers. The two types of samples display very similar linear viscoelastic properties, which can be described with a Maxwell fluid model, but contrasting nonlinear properties due to different network structure. Upon impact, weakly viscoelastic samples exhibit a behavior qualitatively similar to that of Newtonian fluids: A smooth and regular sheet forms, expands, and then retracts. By contrast, for highly viscoelastic fluids, the thickness of the sheet is found to be very irregular, leading to instabilities and eventually formation of holes. We find that material rheological properties rule the onset of instabilities. We first provide a simple image analysis of the expanding sheets to determine the onset of instabilities. We then demonstrate that a Deborah number related to the shortest relaxation time associated to the sample structure following a high shear is the relevant parameter that controls the heterogeneities in the thickness of the sheet, eventually leading to the formation of holes. When the sheet tears-up, data suggest by contrast that the opening dynamics depends also on the expansion rate of the sheet.
△ Less
Submitted 11 November, 2021;
originally announced November 2021.
-
Viscoelasticity and elastocapillarity effects in the impact of drops on a repellent surface
Authors:
Carole-Ann Charles,
Ameur Louhichi,
Laurence ramos,
Christian Ligoure
Abstract:
We investigate freely expanding viscoelastic sheets. The sheets are produced by the impact of drops on a quartz plate covered with a thin layer of liquid nitrogen that suppresses shear viscous dissipation as a result of the cold Leidenfrost effect. The time evolution of the sheet is simultaneously recorded from top and side views using high-speed cameras. The investigated viscoelastic fluids are M…
▽ More
We investigate freely expanding viscoelastic sheets. The sheets are produced by the impact of drops on a quartz plate covered with a thin layer of liquid nitrogen that suppresses shear viscous dissipation as a result of the cold Leidenfrost effect. The time evolution of the sheet is simultaneously recorded from top and side views using high-speed cameras. The investigated viscoelastic fluids are Maxwell fluids, which are characterized by low elastic moduli, and relaxation times that vary over almost two orders of magnitude, thus giving access to a large spectrum of viscoelastic and elastocapillary effects. For the purposes of comparison, Newtonian fluids, with viscosity varying over three orders of magnitude, are also investigated. In this study, $d_{\mathrm{max}}$, the maximal expansion of the sheets, and $t_{\mathrm{max}}$ the time to reach this maximal expansion from the time at impact, are measured as a function of the impact velocity. By using a generalized damped harmonic oscillator model, we rationalize the role of capillarity, bulk elasticity and viscous dissipation in the expansion dynamics of all investigated samples. In the model, the spring constant is a combination of the surface tension and the bulk dynamic elastic modulus. The time-varying damping coefficient is associated to biaxial extensional viscous dissipation and is proportional to the dynamic loss modulus. For all samples, we find that the model reproduces accurately the experimental data for $d_{\mathrm{max}}$ and $t_{\mathrm{max}}$.
△ Less
Submitted 19 May, 2021;
originally announced May 2021.
-
Spinning elastic beads: a route for simultaneous measurements of shear modulus and interfacial energy of soft materials
Authors:
Alessandro Carbonaro,
Kennedy-Nexon Chagua-Encarnacion,
Carole-Ann Charles,
Ty Phou,
Christian Ligoure,
Serge Mora,
Domenico Truzzolillo
Abstract:
Large deformations of soft elastic beads spinning at high angular velocity in a denser background fluid are investigated theoretically, numerically, and experimentally using millimeter-size polyacrylamide hydrogel particles introduced in a spinning drop tensiometer. We determine the equilibrium shapes of the beads from the competition between the centrifugal force and the restoring elastic and sur…
▽ More
Large deformations of soft elastic beads spinning at high angular velocity in a denser background fluid are investigated theoretically, numerically, and experimentally using millimeter-size polyacrylamide hydrogel particles introduced in a spinning drop tensiometer. We determine the equilibrium shapes of the beads from the competition between the centrifugal force and the restoring elastic and surface forces. Considering the beads as neo-Hookean up to large deformations, we show that their elastic modulus and surface energy constant can be simultaneously deduced from their equilibrium shape. Also, our results provide further support to the scenario in which surface energy and surface tension coincide for amorphous polymer gels.
△ Less
Submitted 2 June, 2020;
originally announced June 2020.
-
Biaxial extensional viscous dissipation in sheets expansion formed by impact of drops of Newtonian and non-Newtonian fluids
Authors:
Ameur Louhichi,
Carole-Ann Charles,
Ty Phou,
Dimitris Vlassopoulos,
Laurence Ramos,
Christian Ligoure
Abstract:
We investigate freely expanding liquid sheets made of either simple Newtonian fluids or solutions of high molecular water-soluble polymer chains. A sheet is produced by the impact of a drop on a quartz plate covered with a thin layer of liquid nitrogen that suppresses shear viscous dissipation thanks to an inverse Leidenfrost effect. The sheet expands radially until reaching a maximum diameter and…
▽ More
We investigate freely expanding liquid sheets made of either simple Newtonian fluids or solutions of high molecular water-soluble polymer chains. A sheet is produced by the impact of a drop on a quartz plate covered with a thin layer of liquid nitrogen that suppresses shear viscous dissipation thanks to an inverse Leidenfrost effect. The sheet expands radially until reaching a maximum diameter and subsequently recedes. Experiments indicate the presence of two expansion regimes: the capillary regime, where the maximum expansion is controlled by surface tension forces and does not depend on the viscosity, and the viscous regime, where the expansion is reduced with increasing viscosity. In the viscous regime, the sheet expansion for polymeric samples is strongly enhanced as compared to that of Newtonian samples with comparable zero-shear viscosity. We show that data for Newtonian and non-Newtonian fluids collapse on a unique master curve where the maximum expansion factor is plotted against the relevant effective biaxial extensional Ohnesorge number that depends on fluid density, surface tension and the biaxial extensional viscosity. For Newtonian fluids, this biaxial extensional viscosity is six times the shear viscosity. By contrast, for the non- Newtonian fluids, a characteristic Weissenberg number-dependent biaxial extensional viscosity is identified, which is in quantitative agreement with experimental and theoretical results reported in the literature for biaxial extensional flows of polymeric liquids.
△ Less
Submitted 23 April, 2020; v1 submitted 9 April, 2020;
originally announced April 2020.
-
Impact of beads and drops on a repellent solid surface: a unified description
Authors:
Sristhti Arora,
Jean-Marc Fromental,
Serge Mora,
Ty Phou,
Laurence Ramos,
Christian Ligoure
Abstract:
We investigate freely expanding sheets formed by ultrasoft gel beads, and liquid and viscoelastic drops, produced by the impact of the bead or drop on a silicon wafer covered with a thin layer of liquid nitrogen that suppresses viscous dissipation thanks to an inverse Leidenfrost effect. Our experiments show a unified behaviour for the impact dynamics that holds for solids, liquids, and viscoelast…
▽ More
We investigate freely expanding sheets formed by ultrasoft gel beads, and liquid and viscoelastic drops, produced by the impact of the bead or drop on a silicon wafer covered with a thin layer of liquid nitrogen that suppresses viscous dissipation thanks to an inverse Leidenfrost effect. Our experiments show a unified behaviour for the impact dynamics that holds for solids, liquids, and viscoelastic fluids and that we rationalize by properly taking into account elastocapillary effects. In this framework, the classical impact dynamics of solids and liquids as far as viscous dissipation is negligible, appears as the asymptotic limits of a universal theoretical description. A novel material-dependent characteristic velocity that includes both capillary and bulk elasticity emerges from this unified description of the physics of impact.
△ Less
Submitted 6 March, 2018;
originally announced March 2018.
-
Brittle fracture of polymer transient networks
Authors:
S. Arora,
A. Shabbir,
O. Hassager,
C. Ligoure,
L. Ramos
Abstract:
We study the fracture of reversible double transient networks, constituted of water suspensions of entangled surfactant wormlike micelles reversibly linked by various amounts of telechelic polymers. We provide a state diagram that delineates the regime of fracture without necking of the filament from the regime where no fracture or break-up has been observed. We show that filaments fracture when s…
▽ More
We study the fracture of reversible double transient networks, constituted of water suspensions of entangled surfactant wormlike micelles reversibly linked by various amounts of telechelic polymers. We provide a state diagram that delineates the regime of fracture without necking of the filament from the regime where no fracture or break-up has been observed. We show that filaments fracture when stretched at a rate larger than the inverse of the slowest relaxation time of the networks. We quantitatively demonstrate that dissipation processes are not relevant in our experimental conditions and that, depending on the density of nodes in the networks, fracture occurs in the linear viscoelastic regime or in a non-linear regime. In addition, analysis of the crack opening profiles indicates deviations from a parabolic shape close to the crack tip for weakly connected networks. We demonstrate a direct correlation between the amplitude of the deviation from the parabolic shape and the amount of non linear viscoelasticity.
△ Less
Submitted 15 November, 2017;
originally announced November 2017.
-
Rearrangement zone around a crack tip in a double self-assembled transient network
Authors:
Guillaume Foyart,
Christian Ligoure,
Serge Mora,
Laurence Ramos
Abstract:
We investigate the nucleation and propagation of cracks in self-assembled viscoelastic fluids, which are made of surfactant micelles reversibly linked by telechelic polymers. The morphology of the micelles can be continuously tuned, from spherical to rod-like to wormlike, thus producing transient double networks when the micelles are sufficiently long and entangled, and transient single networks o…
▽ More
We investigate the nucleation and propagation of cracks in self-assembled viscoelastic fluids, which are made of surfactant micelles reversibly linked by telechelic polymers. The morphology of the micelles can be continuously tuned, from spherical to rod-like to wormlike, thus producing transient double networks when the micelles are sufficiently long and entangled, and transient single networks otherwise. For a single network, we show that cracks nucleate when the sample deformation rate involved is comparable to the relaxation time scale of the network. For a double network, by contrast, significant rearrangements of the micelles occur as a crack nucleates and propagates. We show that birefringence develops at the crack tip over a finite length, $ξ$, which corresponds to the length scale over which micelles alignment occur. We find that $ξ$ is larger for slower cracks, suggesting an increase of ductility.
△ Less
Submitted 15 September, 2016; v1 submitted 8 July, 2016;
originally announced July 2016.
-
Interplay between viscosity and elasticity in freely expanding liquid sheets
Authors:
Srishti Arora,
Christian Ligoure,
Laurence Ramos
Abstract:
We investigate the dynamics of freely expanding liquid sheets prepared with fluids with different rheological properties, (i) viscous fluids with a zero-shear viscosity $η_0$ in the range $(1-1000) \, \mathrm{mPa.s}$ and (ii) viscoelastic Maxwell fluids whose elastic modulus, $G_0$, characteristic relaxation time, $τ$, and zero-shear viscosity, $η_0=G_0 τ$, can be tuned over several orders of magn…
▽ More
We investigate the dynamics of freely expanding liquid sheets prepared with fluids with different rheological properties, (i) viscous fluids with a zero-shear viscosity $η_0$ in the range $(1-1000) \, \mathrm{mPa.s}$ and (ii) viscoelastic Maxwell fluids whose elastic modulus, $G_0$, characteristic relaxation time, $τ$, and zero-shear viscosity, $η_0=G_0 τ$, can be tuned over several orders of magnitude. The sheets are produced by impacting a drop of fluid on a small cylindrical solid target. For viscoelastic fluids, we show that, when $τ$ is shorter than the typical lifetime of the sheet ($\sim 10$ ms), the dynamics of the sheet is similar to that of Newtonian viscous liquids with equal zero-shear viscosity. In that case, for little viscous samples ($η_0 <\sim 30$ mPa.s), the maximal expansion of the sheet, $d_{\rm{max}}$, is independent of $η_0$, whereas for more viscous samples, $d_{\rm{max}}$ decreases as $η_0$ increases. We provide a simple model to account for the dependence of the maximal expansion of the sheet with the viscosity that is based on an energy balance between inertia, surface tension and viscous shear dissipation on the solid target, and which accounts well for our experimental data. By contrast, when $τ$ is longer than the typical lifetime of the sheet, the behavior drastically differs. The sheet expansion is strongly enhanced as compared to that of viscous samples with comparable zero-shear viscosity, but is heterogeneous with the occurrence of cracks, revealing the elastic nature of the viscoelastic fluid.
△ Less
Submitted 4 January, 2017; v1 submitted 8 April, 2016;
originally announced April 2016.
-
Bursting of Dilute Emulsion-Based Liquid Sheets Driven by a Marangoni Effect
Authors:
Clara Vernay,
Laurence Ramos,
Christian Ligoure
Abstract:
We study the destabilization mechanism of thin liquid sheets expanding in air and show that dilute oil-in-water emulsion-based sheets disintegrate through the nucleation and growth of holes that perforate the sheet. The velocity and thickness fields of the sheet outside the holes are not perturbed by holes and hole opening follows a Taylor-Culick law. We find that a pre-hole, which widens and thin…
▽ More
We study the destabilization mechanism of thin liquid sheets expanding in air and show that dilute oil-in-water emulsion-based sheets disintegrate through the nucleation and growth of holes that perforate the sheet. The velocity and thickness fields of the sheet outside the holes are not perturbed by holes and hole opening follows a Taylor-Culick law. We find that a pre-hole, which widens and thins out the sheet with time, systematically precedes the hole nucleation. The growth dynamics of the pre-hole follows the law theoretically predicted for a liquid spreading on another liquid of higher surface tension due to Marangoni stresses. Classical Marangoni spreading experiments quantitatively corroborate our findings.
△ Less
Submitted 2 November, 2015;
originally announced November 2015.
-
Free radially expanding liquid sheet in air: time- and space-resolved measurement of the thickness field
Authors:
Clara Vernay,
Laurence Ramos,
Christian Ligoure
Abstract:
The collision of a liquid drop against a small target results in the formation of a thin liquid sheet that extends radially until it reaches a maximum diameter. The subsequent retraction is due to the air-liquid surface tension. We have used a time- and space-resolved technique to measure the thickness field of this class of liquid sheet, based on the grey level measurement of the image of a dyed…
▽ More
The collision of a liquid drop against a small target results in the formation of a thin liquid sheet that extends radially until it reaches a maximum diameter. The subsequent retraction is due to the air-liquid surface tension. We have used a time- and space-resolved technique to measure the thickness field of this class of liquid sheet, based on the grey level measurement of the image of a dyed liquid sheet recorded using a fast camera. This method enables a precise measurement of the thickness in the range $(10-450) \, \mathrm{μm}$, with a temporal resolution equal to that of the camera. We have measured the evolution with time since impact, $t$, and radial position, $r$, of the thickness, $h(r,t)$, for various drop volumes and impact velocities. Two asymptotic regimes for the expansion of the sheet are evidenced. The scalings of the thickness with $t$ and $r$ measured in the two regimes are those that were predicted in \citet{Rozhkov2004} fort the short-time regime and \citet{Villermaux2011} for the long time regime, but never experimentally measured before. Interestingly, our experimental data also evidence the existence of a maximum of the film thickness $h_{\rm{max}}(r)$ at a radial position $r_{\rm{h_{max}}}(t)$ corresponding to the crossover of these two asymptotic regimes. The maximum moves with a constant velocity of the order of the drop impact velocity, as expected theoretically. Thanks to our visualization technique, we also evidence an azimuthal thickness modulation of the liquid sheets.
△ Less
Submitted 12 December, 2014;
originally announced December 2014.
-
Fingering to fracturing transition in a transient gel
Authors:
Guillaume Foyart,
Laurence Ramos,
Serge Mora,
Christian Ligoure
Abstract:
Fracture processes are ubiquitous in soft materials, even in complex fluids, subjected to stresses. To investigate these processes in a simple geometry, we use a model self-assembled transient gel and study the instability patterns obtained in a radial Hele-Shaw cell when a low viscosity oil pushes the more viscous transient gel. Thanks to an analysis of the morphology of the patterns, we find a d…
▽ More
Fracture processes are ubiquitous in soft materials, even in complex fluids, subjected to stresses. To investigate these processes in a simple geometry, we use a model self-assembled transient gel and study the instability patterns obtained in a radial Hele-Shaw cell when a low viscosity oil pushes the more viscous transient gel. Thanks to an analysis of the morphology of the patterns, we find a discontinuous transition between the standard Saffman-Taylor fingering instability and a fracturing instability as the oil injection rate increases. Our data suggest that the flow properties of the gel ahead of the finger tip controls the transition towards fracturing. By analyzing the displacement field of the gel in the vicinity of the fingers and cracks, we show that in the fingering regime, the oil gently pushes the gel, whereas in the fracturing regime, the crack tears apart the gel, resulting in a strong drop of the gel velocity ahead of the crack tip as compared to the tip velocity. We find a unique behavior for the whole displacement field of a gel around a crack, which is drastically different from that around a finger, and reveals the solid-like behavior of the gel at short time. Our experiments and analysis provide quantitative yet simple tools to unambiguously discriminate a finger from a crack in a visco-elastic material.
△ Less
Submitted 21 June, 2013;
originally announced June 2013.
-
Fractures in complex fluids: the case of transient networks
Authors:
Christian Ligoure,
Serge Mora
Abstract:
We present a comprehensive review of the current state of fracture phenomena in transient networks, a wide class of viscoelastic fluids. We will first define what is a fracture in a complex fluid, and recall the main structural and rheological properties of transient networks. Secondly, we review experimental reports on fractures of transient networks in several configurations: shear-induced fract…
▽ More
We present a comprehensive review of the current state of fracture phenomena in transient networks, a wide class of viscoelastic fluids. We will first define what is a fracture in a complex fluid, and recall the main structural and rheological properties of transient networks. Secondly, we review experimental reports on fractures of transient networks in several configurations: shear-induced fractures, fractures in Hele-Shaw cells and fracture in extensional geometries (filament stretching rheometry and pendant drop experiments), including fracture propagation. The tentative extension of the concepts of brittleness and ductility to the fracture mechanisms in transient networks is also discussed. Finally, the different and apparently contradictory theoretical approaches developed to interpret fracture nucleation will be addressed and confronted to experimental results. Rationalized criteria to discriminate the relevance of these different models will be proposed.
△ Less
Submitted 15 January, 2013;
originally announced January 2013.
-
Structural Signature of a Brittle-to-Ductile Transition in Self-Assembled Networks
Authors:
Laurence Ramos,
Arnaud Laperrousaz,
Philippe Dieudonne,
Christian Ligoure
Abstract:
We study the nonlinear rheology of a novel class of transient networks, made of surfactant micelles of tunable morphology reversibly linked by block copolymers. We couple rheology and time-resolved structural measurements, using synchrotron radiation, to characterize the highly nonlinear viscoelastic regime. We propose the fluctuations of the degree of alignment of the micelles under shear as a pr…
▽ More
We study the nonlinear rheology of a novel class of transient networks, made of surfactant micelles of tunable morphology reversibly linked by block copolymers. We couple rheology and time-resolved structural measurements, using synchrotron radiation, to characterize the highly nonlinear viscoelastic regime. We propose the fluctuations of the degree of alignment of the micelles under shear as a probe to identify a fracture process. We show a clear signature of a brittle-to-ductile transition in transient gels, as the morphology of the micelles varies, and provide a parallel between the fracture of solids and the fracture under shear of viscoelastic fluids.
△ Less
Submitted 5 March, 2012;
originally announced March 2012.
-
Copolymer-induced stabilizing effect of highly swollen hexagonal mesophases
Authors:
Laurence Ramos,
Christian Ligoure
Abstract:
We show quantitatively that tiny amounts of copolymer that decorate a oil/water interfaces can greatly enhance the stability of swollen surfactant hexagonal phases, comprising oil tubes regularly arranged in a water matrix. Such soft composite materials, whose both radius of the tubes and water channel between the tubes can be controlled independently over large ranges, offer a potential interes…
▽ More
We show quantitatively that tiny amounts of copolymer that decorate a oil/water interfaces can greatly enhance the stability of swollen surfactant hexagonal phases, comprising oil tubes regularly arranged in a water matrix. Such soft composite materials, whose both radius of the tubes and water channel between the tubes can be controlled independently over large ranges, offer a potential interest for the synthesis of mesoporous materials.
△ Less
Submitted 23 September, 2008;
originally announced September 2008.
-
Structure and rheological properties of model microemulsion networks filled with nanoparticles
Authors:
Nicolas Puech,
Serge Mora,
Vincent Testard,
Grégoire Porte,
Christian Ligoure,
Isabelle Grillo,
Ty Phou,
Julian Oberdisse
Abstract:
Model microemulsion networks of oil droplets stabilized by non ionic surfactant and telechelic polymer C18-PEO(10k)-C18 have been studied for two droplet-to-polymer size ratios. The rheological properties of the networks have been measured as a function of network connectivity and can be described in terms of simple percolation laws. The network structure has been characterised by Small Angle Ne…
▽ More
Model microemulsion networks of oil droplets stabilized by non ionic surfactant and telechelic polymer C18-PEO(10k)-C18 have been studied for two droplet-to-polymer size ratios. The rheological properties of the networks have been measured as a function of network connectivity and can be described in terms of simple percolation laws. The network structure has been characterised by Small Angle Neutron Scattering. A Reverse Monte Carlo approach is used to demonstrate the interplay of attraction and repulsion induced by the copolymer. These model networks are then used as matrix for the incorporation of silica nanoparticles (R=10nm), individual dispersion being checked by scattering. A strong impact on the rheological properties is found for silica volume fractions up to 9%.
△ Less
Submitted 25 June, 2008;
originally announced June 2008.
-
Linear viscoelasticity of entangled wormlike micelles bridged by telechelic polymers : an experimental model for a double transient network
Authors:
Kaori Nakaya,
Laurence Ramos,
Herve Tabuteau,
Christian Ligoure
Abstract:
We survey the linear viscoelasticity of a new type of transient network: bridged wormlike micelles, whose structure has been characterized recently [Ramos and Ligoure, (2007)]. This composite material is obtained by adding telechelic copolymers (water-soluble chains with hydrophobic stickers at each extremity) to a solution of entangled wormlike micelles (WM). For comparison, naked WM and WM dec…
▽ More
We survey the linear viscoelasticity of a new type of transient network: bridged wormlike micelles, whose structure has been characterized recently [Ramos and Ligoure, (2007)]. This composite material is obtained by adding telechelic copolymers (water-soluble chains with hydrophobic stickers at each extremity) to a solution of entangled wormlike micelles (WM). For comparison, naked WM and WM decorated by amphiphilic copolymers are also investigated. While these latter systems exhibit almost a same single ideal Maxwell behavior, solutions of bridged WM can be described as two Maxwell fluids components blends, characterized by two markedly different characteristic times, t_fast and t_slow, and two elastic moduli, G_fast and G_slow, with G_fast >> G_slow. We show that the slow mode is related to the viscoelasticity of the transient network of entangled WM, and the fast mode to the network of telechelic active chains (i.e. chains that do not form loops but bridge two micelles). The dependence of the viscoelasticity with the surfactant concentration, phi, and the sticker-to-surfactant molar ratio, beta, is discussed. In particular, we show that G_fast is proportional to the number of active chains in the material, phi beta. Simple theoretical expectations allow then to evaluate the bridges/loops ratio for the telechelic polymers.
△ Less
Submitted 5 February, 2007;
originally announced February 2007.
-
The Role of Solid Friction in the Sedimentation of Strongly Attractive Colloidal Gels
Authors:
Jean-Michel Condre,
Christian Ligoure,
Luca Cipelletti
Abstract:
We study experimentally and theoretically the sedimentation of gels made of strongly aggregated colloidal particles, focussing on the long time behavior, when mechanical equilibrium is asymptotically reached. The asymptotic gel height is found to vary linearly with the initial height, a finding in stark contrast with a recent study on similar gels [Manley \textit{et al.} 2005 \textit{Phys. Rev.…
▽ More
We study experimentally and theoretically the sedimentation of gels made of strongly aggregated colloidal particles, focussing on the long time behavior, when mechanical equilibrium is asymptotically reached. The asymptotic gel height is found to vary linearly with the initial height, a finding in stark contrast with a recent study on similar gels [Manley \textit{et al.} 2005 \textit{Phys. Rev. Lett.} \textbf{94} 218302]. We show that the asymptotic compaction results from the balance between gravity pull, network elasticity, and solid friction between the gel and the container walls. Based on these ingredients, we propose a simple model to account for the dependence of the height loss on the initial height and volume fraction. As a result of our analysis, we show that the static friction coefficient between the gel and the container walls strongly depends on volume fraction: the higher the volume fraction, the weaker the solid friction. This nonintuitive behavior is explained using simple scaling arguments.
△ Less
Submitted 5 October, 2006;
originally announced October 2006.
-
Bending elasticity of a curved amphiphilic film decorated anchored copolymers: a small angle neutron scattering study
Authors:
Jacqueline Appell,
Christian Ligoure,
Gregoire Porte
Abstract:
Microemulsion droplets (oil in water stabilized by a surfactant film) are progressively decorated with increasing amounts of poly ethylene- oxide (PEO) chains anchored in the film by the short aliphatic chain grafted at one end of the PEO chain . The evolution of the bending elasticity of the surfactant film with increasing decoration is deduced from the evolution in size and polydispersity of t…
▽ More
Microemulsion droplets (oil in water stabilized by a surfactant film) are progressively decorated with increasing amounts of poly ethylene- oxide (PEO) chains anchored in the film by the short aliphatic chain grafted at one end of the PEO chain . The evolution of the bending elasticity of the surfactant film with increasing decoration is deduced from the evolution in size and polydispersity of the droplets as reflected by small angle neutron scattering. The optimum curvature radius decreases while the bending rigidity modulus remains practically constant. The experimental results compare well with the predictions of a model developed for the bending properties of a curved film decorated by non-adsorbing polymer chains, which takes into account, the finite curvature of the film and the free diffusion of the chains on the film.
△ Less
Submitted 30 June, 2004;
originally announced June 2004.
-
Structure factor of polymers interacting via a short range repulsive potential: application to hairy wormlike micelles
Authors:
G. Massiera,
E. Pitard,
L. Ramos,
C. Ligoure
Abstract:
We use the Random Phase Approximation (RPA) to compute the structure factor, S(q), of a solution of chains interacting through a soft and short range repulsive potential V. Above a threshold polymer concentration, whose magnitude is essentially controlled by the range of the potential, S(q) exhibits a peak whose position depends on the concentration. We take advantage of the close analogy betwee…
▽ More
We use the Random Phase Approximation (RPA) to compute the structure factor, S(q), of a solution of chains interacting through a soft and short range repulsive potential V. Above a threshold polymer concentration, whose magnitude is essentially controlled by the range of the potential, S(q) exhibits a peak whose position depends on the concentration. We take advantage of the close analogy between polymers and wormlike micelles and apply our model, using a Gaussian function for V, to quantitatively analyze experimental small angle neutron scattering profiles of semi-dilute solutions of hairy wormlike micelles. These samples, which consist in surfactant self-assembled flexible cylinders decorated by amphiphilic copolymer, provide indeed an appropriate experimental model system to study the structure of sterically interacting polymer solutions.
△ Less
Submitted 9 January, 2003;
originally announced January 2003.
-
Inwardly curved polymer brushes : Concave is not like Convex
Authors:
Manoel Manghi,
Miguel Aubouy,
Cyprien Gay,
Christian Ligoure
Abstract:
Inwardly curved polymer brushes are present in cylindrical and spherical micelles or in membranes tubes and vesicles decorated with anchored polymers, and influence their stability. We consider such polymer brushes in good solvent and show that previous works, based on a self-similar concentric structure of the brush, are physically inconsistent. We use scaling laws to derive very simply the lea…
▽ More
Inwardly curved polymer brushes are present in cylindrical and spherical micelles or in membranes tubes and vesicles decorated with anchored polymers, and influence their stability. We consider such polymer brushes in good solvent and show that previous works, based on a self-similar concentric structure of the brush, are physically inconsistent. We use scaling laws to derive very simply the leading term of the free energy in the high curvature limit, where the osmotic pressure is the relevant physical ingredient. We also derive the complete conformation at all curvatures using a self-consistent field approach. The free energy is computed therefrom using a local scaling description.
△ Less
Submitted 25 June, 2001; v1 submitted 5 February, 2001;
originally announced February 2001.
