Defect-based characterization of the fatigue behavior of additively manufactured titanium aluminides
Authors:
M. Teschke,
J. Moritz,
J. Tenkamp,
A. Marquardt,
C. Leyens,
F. Walther
Abstract:
The additively manufactured titanium aluminide alloy TNM-B1 was characterized microstructurally and mechanically in the as-built and hot isostatically pressed (HIP) condition. Tensile and constant amplitude tests were performed at room temperature and 800 °C. Using fractographic SEM images, the fracture-inducing defect was identified. With the HIP, defect number and size could be reduced, increasi…
▽ More
The additively manufactured titanium aluminide alloy TNM-B1 was characterized microstructurally and mechanically in the as-built and hot isostatically pressed (HIP) condition. Tensile and constant amplitude tests were performed at room temperature and 800 °C. Using fractographic SEM images, the fracture-inducing defect was identified. With the HIP, defect number and size could be reduced, increasing fatigue strength by 43% to 500 MPa. Using the model approaches of Murakami and Shiozawa, the fatigue life was correlated with the local stress intensity factor and could be described as function of the stress amplitude as well as the size and location of fracture-inducing defects.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
Magneto-structural correlations in a systematically disordered B2 lattice
Authors:
Jonathan Ehrler,
Biplab Sanyal,
Jörg Grenzer,
Shengqiang Zhou,
Roman Böttger,
Benedikt Eggert,
Heiko Wende,
Jürgen Lindner,
Jürgen Fassbender,
Christoph Leyens,
Kay Potzger,
Rantej Bali
Abstract:
Ferromagnetism in certain B2 ordered alloys such as Fe$_{60}$Al$_{40}$ can be switched on, and tuned, via antisite disordering of the atomic arrangement. The disordering is accompanied by a $\sim$1 % increase in the lattice parameter. Here we performed a systematic disordering of B2 Fe$_{60}$Al$_{40}$ thin films, and obtained correlations between the order parameter ($S$), lattice parameter (…
▽ More
Ferromagnetism in certain B2 ordered alloys such as Fe$_{60}$Al$_{40}$ can be switched on, and tuned, via antisite disordering of the atomic arrangement. The disordering is accompanied by a $\sim$1 % increase in the lattice parameter. Here we performed a systematic disordering of B2 Fe$_{60}$Al$_{40}$ thin films, and obtained correlations between the order parameter ($S$), lattice parameter ($a_0$), and the induced saturation magnetization ($M_{s}$). As the lattice is gradually disordered, a critical point occurs at 1-$S$=0.6 and $a_0$=291 pm, where a sharp increase of the $M_{s}$ is observed. DFT calculations suggest that below the critical point the system magnetically behaves as it would still be fully ordered, whereas above, it is largely the increase of $a_0$ in the disordered state that determines the $M_{s}$. The insights obtained here can be useful for achieving tailored magnetic properties in alloys through disordering.
△ Less
Submitted 19 November, 2019;
originally announced November 2019.
