-
REBCO delamination characterization by 90 degree peel test
Authors:
Jun Lu,
Jeremy Levitan,
Aliya Hutley,
Hongyu Bai
Abstract:
REBCO tape has successfully used in ultra-high field magnets. Mechanically, it is very strong in its length direction but is prone to delamination in the thickness direction. In an epoxy impregnated REBCO magnet, thermal strain alone could delaminate the conductor. Even for dry wound REBCO coil, a conductor with very low delamination strength is still a concern. Therefore, it is important to chara…
▽ More
REBCO tape has successfully used in ultra-high field magnets. Mechanically, it is very strong in its length direction but is prone to delamination in the thickness direction. In an epoxy impregnated REBCO magnet, thermal strain alone could delaminate the conductor. Even for dry wound REBCO coil, a conductor with very low delamination strength is still a concern. Therefore, it is important to characterize the delamination strength of the conductor. In the past decade, significant progresses have been made in the characterization of REBCO delamination strength. Among several developed characterization methods, the 90 degree peel test is simple to setup and seems to offer reproducible results. Therefore, this test could be used as a reliable method to characterize the relative delamination strength of REBCO tapes for quality control purposes. This paper presents our development of 90 degree peel test method for quality assurance test of the 40 T all-superconducting magnet project at the National High Magnetic Field Laboratory. We investigated the factors that influence the test results, such as thickness and RRR of the copper layer. We found that peel strength increases with decreasing Cu thickness. We also found that peel strength is positively correlated with RRR of the copper. Despite these effects, 90 degree peel test is still a valuable quality assurance tool to evaluate delamination strength for large volume of tapes with the same copper thickness.
△ Less
Submitted 13 October, 2024;
originally announced October 2024.
-
Residual resistance ratio of Cu stabilizer in commercial REBCO tapes
Authors:
Jun Lu,
Yan Xin,
Vince Toplosky,
Jeremy Levitan,
Ke Han,
Jane Wadhams,
Munir Humayun,
Dmytro Abraimov,
Hongyu Bai
Abstract:
Residual resistance ratio (RRR) of Cu stabilizer in REBCO coated conductor is an important design parameter for REBCO magnets. In this work, we measured RRR of electroplated Cu stabilizer in commercial REBCO tapes. Over 130 samples were measured for the quality assurance programs of REBCO magnet projects at the National High Magnetic Field Laboratory, USA (NHMFL). The average RRR value was above 5…
▽ More
Residual resistance ratio (RRR) of Cu stabilizer in REBCO coated conductor is an important design parameter for REBCO magnets. In this work, we measured RRR of electroplated Cu stabilizer in commercial REBCO tapes. Over 130 samples were measured for the quality assurance programs of REBCO magnet projects at the National High Magnetic Field Laboratory, USA (NHMFL). The average RRR value was above 50. In order to investigate the factors that influence RRR, several samples were analyzed by using scanning electron microscopy, secondary ion mass spectroscopy, and inductively coupled plasma mass spectroscopy. We found that, in our samples, RRR was strongly correlated with the grain size. We demonstrated that RRR was primarily determined by grain boundary resistivity. Lower RRR was also strongly correlated with higher concentration of chlorine impurity. This is explained by that higher chlorine impurity hindered the grain growth in the room temperature self annealing process resulting smaller grain. Smaller grain resulted in lower RRR. In addition, thermal annealing significantly enhanced RRR. An activation energy of 0.4 eV was obtained from the annealing experiment which corresponds to the activation of Cu grain growth.
△ Less
Submitted 13 October, 2024;
originally announced October 2024.
-
Calibration of a superconducting transformer by measuring critical current of a NbTi Rutherford cable
Authors:
Hui Yu,
Jeremy Levitan,
Jun Lu
Abstract:
Large high field superconducting magnets often requires high current superconducting cables. In order to develop these cables, a facility capable of providing high magnetic field with large sampling area as well as electrical current of tens of kA is essential. A superconducting transformer is an energy-efficient and low-cost way to provide large current to superconducting cables. Previously, we c…
▽ More
Large high field superconducting magnets often requires high current superconducting cables. In order to develop these cables, a facility capable of providing high magnetic field with large sampling area as well as electrical current of tens of kA is essential. A superconducting transformer is an energy-efficient and low-cost way to provide large current to superconducting cables. Previously, we co-developed a superconducting transformer and successfully tested it to a maximum output current of 45 kA in zero magnetic field. In this work, this superconducting transformer is installed to the 12 T split solenoid magnet at the National High Magnetic Field Laboratory (NHMFL). We calibrated it by using this facility to measure critical current of a NbTi Rutherford cable as a function of magnetic field up to 10 T, and compare the results with those available in the literature. In addition, a strand extracted from the NbTi cable is tested for critical current. The critical current of the extracted strand is scaled and compared with critical current of the cable. The accuracy of the critical current measurement using this superconducting transformer is discussed in detail. This work concludes the commissioning of this superconducting transformer which combined with the 12 T split magnet will provide unique cable testing capability for future cable development for the NHMFL and its users.
△ Less
Submitted 13 February, 2023;
originally announced February 2023.
-
Verification Testing of MQXFA Nb3Sn Wires Procured Under LARP
Authors:
Jeremy Levitan,
Jun Lu,
Vito Lombardo,
Lance Cooley
Abstract:
The High-Luminosity LHC Accelerator Upgrade Project (AUP) in the U.S. will construct quadrupole magnets to be delivered to CERN. An initial 3 tons, over 600 km total length of conductor was procured under the LHC Accelerator R&D Program (LARP) for this project. Programs for quality control(QC) at the supplier and quality verification (QV) at the laboratories were solidified into components of the…
▽ More
The High-Luminosity LHC Accelerator Upgrade Project (AUP) in the U.S. will construct quadrupole magnets to be delivered to CERN. An initial 3 tons, over 600 km total length of conductor was procured under the LHC Accelerator R&D Program (LARP) for this project. Programs for quality control(QC) at the supplier and quality verification (QV) at the laboratories were solidified into components of the overall quality plan for strand procurement under AUP. Measurements of the critical current (Ic) and residual resistance ratio (RRR), and related probes and techniques, are central to the quality plan. Described below is the verification testing that has taken place at the National High Magnetic Field Laboratory (NHMFL). Testing challenges are presented by the high sensitivity of these wires. In addition, new RRR test software was developed to accommodate challenges presented by meeting international standards with existing configurations of test strands.
△ Less
Submitted 13 February, 2023;
originally announced February 2023.
-
Effects of Wax Impregnation on Contact Resistivity Between REBCO Tapes
Authors:
Jeremy W. Levitan,
Jun Lu,
Brent Jarvis,
Hongyu Bai
Abstract:
Advances on no-insulation REBCO coil technology has made understanding and controlling contact resistivity increasingly im-portant. Praffin (wax) impregnation is a process that has been used for improving mechanical stability of insulated and no-insulation REBCO coils. Wax impregnation is beneficial in both no-insulation coils and insulated coils with additional copper sta-bilizer or multiple cond…
▽ More
Advances on no-insulation REBCO coil technology has made understanding and controlling contact resistivity increasingly im-portant. Praffin (wax) impregnation is a process that has been used for improving mechanical stability of insulated and no-insulation REBCO coils. Wax impregnation is beneficial in both no-insulation coils and insulated coils with additional copper sta-bilizer or multiple conductors. In the latter scenario, contact re-sistance between conductor and additional stabilizer is also im-portant. It is crucial to understand the effects of wax impregna-tion on contact resistivity (Rct). We designed and built an appa-ratus to use short REBCO samples which simulates the behavior of Rct in a pancake coil during the wax impregnation process. Rct was measured at 77 K before and after the wax impregnation. In addition, a single pancake coil was wound to test the effect of wax impregnation. This coil simulates the NHMFL 32 T magnet Coil A in winding stresses. Rct was measured at 77 K and 4.2 K before and after wax impregnation. We found that wax impregnation does not significantly change contact resistivity. This means that wax impregnation can be used in coils without compromising the current sharing ability between turns. The experimental process and results are discussed.
△ Less
Submitted 13 February, 2023;
originally announced February 2023.
-
Contact resistivity due to oxide layers between two REBCO tapes
Authors:
Jun Lu,
Yan Xin,
Eric Lochner,
Kyle Radcliff,
Jeremy Levitan
Abstract:
In a no-insulation (NI) REBCO magnet, the turn-to-turn contact resistivity (Rc) determines its quench self-protection capability, charging delay time and the energy loss during field ramps. Therefore it is critically important to be able to control a range of Rc values suitable for various NI magnet coils. We used a commercial oxidizing agent Ebonol C to treat the copper surface of REBCO tapes. Th…
▽ More
In a no-insulation (NI) REBCO magnet, the turn-to-turn contact resistivity (Rc) determines its quench self-protection capability, charging delay time and the energy loss during field ramps. Therefore it is critically important to be able to control a range of Rc values suitable for various NI magnet coils. We used a commercial oxidizing agent Ebonol C to treat the copper surface of REBCO tapes. The copper oxide layer was characterized by cross-sectional transmission electron microscopy (TEM) and x-ray photoelectron spectroscopy (XPS). The oxide layer formed in Ebonol C at 98 °C for 1 min is Cu2O of about 0.5 um. The Rc between two oxidized REBCO is in the order of 35 mOhm-cm2 at 4.2 K which decreases slowly with contact pressure cycles. The Rc increases but only slightly at 77 K. We also investigated the effect of oxidation of stainless steel co-wind tape on Rc. The native oxides on 316 stainless steel tape as well as those heated in air at 200 - 600 °C were examined by TEM and XPS. The native oxides layer is about 3 nm thick. After heating at 300 °C for 8 min and 600 °C for 1 min, its thickness increases to about 10 and 30 nm respectively. For the stainless steel tapes with about 10 nm surface oxides, pressure cycling for 30,000 cycles decreases Rc by almost 4 orders of magnitude. Whereas at 77 K, it only changes slightly. For a surface with 30 nm oxide, the Rc decreases moderately with load cycles. The results suggest that for an oxidized stainless steel to achieve stable Rc over large number of load cycles a relatively thick oxide film is needed.
△ Less
Submitted 3 December, 2019;
originally announced December 2019.
-
Chaotic enhancement of decay. The effect of classical phase space structure
Authors:
Yosef Ashkenazy,
Luca Bonci,
Jacob Levitan,
Roberto Roncaglia
Abstract:
We investigate the decay process from a time dependent potential well in the semiclassical regime. The classical dynamics is chaotic and the decay rate shows an irregular behavior as a function of the system parameters. By studying the weak-chaos regime we are able to connect the decay irregularities to the presence of nonlinear resonances in the classical phase space. A quantitative analytical…
▽ More
We investigate the decay process from a time dependent potential well in the semiclassical regime. The classical dynamics is chaotic and the decay rate shows an irregular behavior as a function of the system parameters. By studying the weak-chaos regime we are able to connect the decay irregularities to the presence of nonlinear resonances in the classical phase space. A quantitative analytical prediction which accounts for the numerical results is obtained.
△ Less
Submitted 21 October, 1999;
originally announced October 1999.
-
Complexity, Tunneling and Geometrical Symmetry
Authors:
L. P. Horwitz,
J. Levitan,
Y. Ashkenazy
Abstract:
It is demonstrated in the context of the simple one-dimensional example of a barrier in an infinite well, that highly complex behavior of the time evolution of a wave function is associated with the almost degeneracy of levels in the process of tunneling. Degenerate conditions are obtained by shifting the position of the barrier. The complexity strength depends on the number of almost degenerate…
▽ More
It is demonstrated in the context of the simple one-dimensional example of a barrier in an infinite well, that highly complex behavior of the time evolution of a wave function is associated with the almost degeneracy of levels in the process of tunneling. Degenerate conditions are obtained by shifting the position of the barrier. The complexity strength depends on the number of almost degenerate levels which depend on geometrical symmetry. The presence of complex behavior is studied to establish correlation with spectral degeneracy.
△ Less
Submitted 21 April, 1996;
originally announced April 1996.
-
Chaotic Signatures in the Spectrum of a Quantum Double Well
Authors:
R. Berkovits,
Y. Ashkenazy,
L. P. Horwitz,
J. Levitan
Abstract:
The spectrum of a double well constructed of a square barrier embedded in an infinite well is analyzed. Level statistics for levels slightly above the barrier show signs of Wigner statistics usually associated with quantum chaos. The correspondence with Wigner statistics improves when an ensemble of systems with slightly different barrier heights is taken, possibly reflecting an adiabatic time-d…
▽ More
The spectrum of a double well constructed of a square barrier embedded in an infinite well is analyzed. Level statistics for levels slightly above the barrier show signs of Wigner statistics usually associated with quantum chaos. The correspondence with Wigner statistics improves when an ensemble of systems with slightly different barrier heights is taken, possibly reflecting an adiabatic time-dependent modulation of the barrier.
△ Less
Submitted 2 February, 1996;
originally announced February 1996.
