-
Role of particles size on the cohesive strength of non-sintered (green) ceramics
Authors:
M. Hristova,
I. Lesov,
L. Mihaylov,
N. Denkov,
S. Tcholakova
Abstract:
Preparation of particle-loaded foams, followed by drying, sintering and/or cross-linking are widely explored routes for developing lightweight ceramics with high mechanical strength. The non-sintered dry ceramic foams are less studied due to their intricate production and the assumed poor mechanical strength of the obtained "green" materials. Here we produce lightweight ceramics from foamed partic…
▽ More
Preparation of particle-loaded foams, followed by drying, sintering and/or cross-linking are widely explored routes for developing lightweight ceramics with high mechanical strength. The non-sintered dry ceramic foams are less studied due to their intricate production and the assumed poor mechanical strength of the obtained "green" materials. Here we produce lightweight ceramics from foamed particle suspensions containing spherical silica particles with radii varied between 4.5 nm and 7 μm. The wet foams were prepared in the presence of cationic surfactant and were dried at ambient conditions to obtain porous materials with mass densities between 100 and 700 kg/m3. The materials containing smaller particles exhibited much higher strength (up to 2000 times), approaching that of the sintered materials. A new theoretical expression for predicting the mechanical strength of such materials was derived and was used to explain the measured strengths of the produced materials through the van der Waals attractions between the particles in the final dry materials.
△ Less
Submitted 12 September, 2022;
originally announced September 2022.
-
Flow reactor for preparation of lipid nanoparticles via temperature variations
Authors:
I. Lesov,
D. Glushkova,
D. Cholakova,
M. T. Georgiev,
S. Tcholakova,
S. K. Smoukov,
N. Denkov
Abstract:
Lipid nanoemulsions and nanosuspensions are used as flavor carriers and bubble stabilizers in soft drinks and foods, as well as delivery vehicles for lipophilic drugs in pharmaceutics. Common techniques for their formation are the high-pressure and ultrasonic homogenizers. These techniques dissipate most of the input energy, which results in excessive heating and generation of free radicals that m…
▽ More
Lipid nanoemulsions and nanosuspensions are used as flavor carriers and bubble stabilizers in soft drinks and foods, as well as delivery vehicles for lipophilic drugs in pharmaceutics. Common techniques for their formation are the high-pressure and ultrasonic homogenizers. These techniques dissipate most of the input energy, which results in excessive heating and generation of free radicals that might modify sensitive ingredients. Low energy methods are also used in some applications, but they have specific limitations restricting their universal use. In the current study, we propose an alternative approach - a flow reactor with a variable temperature, which utilizes the lipids' polymorphic transitions to induce spontaneous fragmentation of the lipid microparticles into nanoparticles. The reactor allows us to obtain emulsions or suspensions with particle diameters tunable between 20 and 800 nm when appropriate surfactants, temperature profiles, and flow rates are applied. The fragmentation is comparable to that in a high-pressure homogenizer at ca. 500 bars or higher, without creating emulsion overheating or cavitation typical for the conventional methods. The flow reactor can be scaled up to industrial applications using simple scaling rules.
△ Less
Submitted 22 June, 2022;
originally announced June 2022.
-
Food grade nanoemulsions preparation by rotor-stator homogenization
Authors:
Dilek Gazolu-Rusanova,
Ivan Lesov,
Slavka Tcholakova,
Nikolai Denkov,
Badreddine Ahtchi
Abstract:
High-pressure homogenizers, typically used for producing nanoemulsions at the industrial scale, are energy and maintenance intensive, and limited to produce only dilute, low viscosity nanoemulsions. We propose an alternative approach to produce dilute to concentrated food-grade nanoemulsions with droplet size ranging between 100 and 500 nm using rotor-stator homogenization. Gum Arabic (GA) or modi…
▽ More
High-pressure homogenizers, typically used for producing nanoemulsions at the industrial scale, are energy and maintenance intensive, and limited to produce only dilute, low viscosity nanoemulsions. We propose an alternative approach to produce dilute to concentrated food-grade nanoemulsions with droplet size ranging between 100 and 500 nm using rotor-stator homogenization. Gum Arabic (GA) or modified starch (MS) was used as both viscosity modifier and emulsion stabilizer. GA and MS have relatively low surface activity compared to the common low-molecular-mass surfactants used typically for nanoemulsion preparation. The main differences between GA and MS are the lower viscosity of the GA solutions, compared to MS solutions, and the faster adsorption of MS, as compared to GA. The obtained results show that stable nanoemulsions are formed by rotor-stator homogenization when the rapidly adsorbing MS is used as emulsifier. Much larger drops are formed during emulsification with GA, which is due to significant drop-drop coalescence in the respective emulsions. The experimental results for the nanoemulsions prepared with MS are well-described by the theoretical expression for emulsification in turbulent viscous regime, after proper account for the effects of temperature and drop-drop interactions in the sheared emulsions.
△ Less
Submitted 17 December, 2019;
originally announced December 2019.
