Nanosecond Laser Annealing: impact on superconducting Silicon on Insulator epilayers
Authors:
Y. Baron,
J. L. Lábár,
S. Lequien,
B. Pécz,
R. Daubriac,
S. Kerdilés,
P. Acosta ALba,
C. Marcenat,
D. Débarre,
F. Lefloch,
F. Chiodi
Abstract:
We present superconducting monocrystalline Silicon On Insulator thin 33 nm epilayers. They are obtained by nanosecond laser annealing under ultra-high vacuum on 300 mm wafers heavily pre-implantated with boron ($2.5\times \,10^{16}\, at/cm^2$, 3 keV). Superconductivity is discussed in relation to the structural, electrical and material properties, a step towards the integration of ultra-doped supe…
▽ More
We present superconducting monocrystalline Silicon On Insulator thin 33 nm epilayers. They are obtained by nanosecond laser annealing under ultra-high vacuum on 300 mm wafers heavily pre-implantated with boron ($2.5\times \,10^{16}\, at/cm^2$, 3 keV). Superconductivity is discussed in relation to the structural, electrical and material properties, a step towards the integration of ultra-doped superconducting Si at large scale. In particular, we highlight the effect of the nanosecond laser annealing energy and the impact of multiple laser anneals. Increasing the energy leads to a linear increase of the layer thickness, and to the increase of the superconducting critical temperature $T_c$ from zero ($<35\, mK$) to $0.5\,K$. This value is comparable to superconducting Si layers realised by Gas Immersion Laser Doping where the dopants are incorporated without introducing the deep defects associated to implantation. Superconductivity only appears when the annealed depth is larger than the initial amorphous layer induced by the boron implantation. The number of subsequent anneals results in a more homogeneous doping with reduced amount of structural defects and increased conductivity. The quantitative analysis of $T_c$ concludes on a superconducting/ non superconducting bilayer, with an extremely low resistance interface. This highlights the possibility to couple efficiently superconducting Si to Si channels.
△ Less
Submitted 25 June, 2024;
originally announced June 2024.
Improvement of the critical temperature of NbTiN films on III-nitride substrates
Authors:
Houssaine Machhadani,
Julien Zichi,
Catherine Bougerol,
Stéphane Lequien,
Jean-Luc Thomassin,
Nicolas Mollard,
Anna Mukhtarova,
Val Zwiller,
Jean-Michel Gérard,
Eva Monroy
Abstract:
In this paper, we study the impact of using III-nitride semiconductors (GaN, AlN) as substrates for ultrathin (11 nm) superconducting films of NbTiN deposited by reactive magnetron sputtering. The resulting NbTiN layers are (111)-oriented, fully relaxed, and they keep an epitaxial relation with the substrate. The higher critical superconducting temperature (Tc = 11.8 K) was obtained on AlN-on-sapp…
▽ More
In this paper, we study the impact of using III-nitride semiconductors (GaN, AlN) as substrates for ultrathin (11 nm) superconducting films of NbTiN deposited by reactive magnetron sputtering. The resulting NbTiN layers are (111)-oriented, fully relaxed, and they keep an epitaxial relation with the substrate. The higher critical superconducting temperature (Tc = 11.8 K) was obtained on AlN-on-sapphire, which was the substrate with smaller lattice mismatch with NbTiN. We attribute this improvement to a reduction of the NbTiN roughness, which appears associated to the relaxation of the lattice misfit with the substrate. On AlN-on-sapphire, superconducting nanowire single photon detectors (SNSPDs) were fabricated and tested, obtaining external quantum efficiencies that are in excellent agreement with theoretical calculations.
△ Less
Submitted 5 December, 2018; v1 submitted 9 October, 2018;
originally announced October 2018.
