-
Machine Learning Reveals Composition Dependent Thermal Stability in Halide Perovskites
Authors:
Abigail R. Hering,
Mansha Dubey,
Elahe Hosseini,
Meghna Srivastava,
Yu An,
Juan-Pablo Correa-Baena,
Houman Homayoun,
Marina S. Leite
Abstract:
Halide perovskites exhibit unpredictable properties in response to environmental stressors, due to several composition-dependent degradation mechanisms. In this work, we apply data visualization and machine learning (ML) techniques to reveal unexpected correlations between composition, temperature, and material properties while using high throughput, in situ environmental photoluminescence (PL) ex…
▽ More
Halide perovskites exhibit unpredictable properties in response to environmental stressors, due to several composition-dependent degradation mechanisms. In this work, we apply data visualization and machine learning (ML) techniques to reveal unexpected correlations between composition, temperature, and material properties while using high throughput, in situ environmental photoluminescence (PL) experiments. Correlation heatmaps show the strong influence of Cs content on film degradation, and dimensionality reduction visualization methods uncover clear composition-based data clusters. An extreme gradient boosting algorithm (XGBoost) effectively forecasts PL features for ten perovskite films with both composition-agnostic (>85% accuracy) and composition-dependent (>75% accuracy) model approaches, while elucidating the relative feature importance of composition (up to 99%). This model validates a previously unseen anti-correlation between Cs content and material thermal stability. Our ML-based framework can be expanded to any perovskite family, significantly reducing the analysis time currently employed to identify stable options for photovoltaics.
△ Less
Submitted 23 April, 2025; v1 submitted 4 April, 2025;
originally announced April 2025.
-
Materials Screening Approach to Thermochemically Stable Thin Film Optical Emitters for Thermophotovoltaics
Authors:
Declan Kopper,
Marina S. Leite
Abstract:
Thermophotovoltaics (TPVs) have the potential to exhibit higher power conversion efficiencies than traditional photovoltaics (PVs), with a broad range of applicability from waste recovery systems to aerospace solutions. They operate by preferentially radiating above bandgap photons via a high temperature optical emitter, whose spectrum is tuned through choice of materials and geometry. For TPV to…
▽ More
Thermophotovoltaics (TPVs) have the potential to exhibit higher power conversion efficiencies than traditional photovoltaics (PVs), with a broad range of applicability from waste recovery systems to aerospace solutions. They operate by preferentially radiating above bandgap photons via a high temperature optical emitter, whose spectrum is tuned through choice of materials and geometry. For TPV to be practically implemented, the emitters must be designed with a simple optical structure while remaining thermally stable. Here, we demonstrate coating/substrate bilayer thin films as a solution to these design criteria. With the optical data of 53 high melting point materials, we simulate the bilayer emissivity as a function of coating thickness for each thermochemically stable emitter operating at 1,800 °C. Emitter-cell systems are characterized by the cell power density and TPV conversion efficiency, constituting a TPV performance metric space. For a given bilayer and bandgap these coating thickness parameterized figures of merit form a performance metric curve, with the best points defining a tradeoff zone. We screen the resulting performance metric curves, identifying trends based on optical properties of the system, finding a high degree of tunability through the material selection step. For GaSb cells, >49% efficiency is achieved using AlN/W, a 5.6% increase over bulk W. By calculating the figures of merit for all systems with varying bandgap, we find unique emitter choices per PV cell for achieving the highest potential efficiency. Our materials screening approach uses physical data to identify improvements to emitters for experimental TPV designs.
△ Less
Submitted 18 October, 2024;
originally announced October 2024.
-
Efficient hot carrier dynamics in near-infrared photocatalytic metals
Authors:
Cesar E. P. Villegas,
Marina S. Leite,
Andrea Marini,
A. R. Rocha
Abstract:
Photoexcited metals can produce highly-energetic hot carriers whose controlled generation and extraction is a promising avenue for technological applications. While hot carrier dynamics in Au-group metals have been widely investigated, a microscopic description of the dynamics of photoexcited carriers in the mid-infrared and near-infrared Pt-group metals range is still scarce. Since these material…
▽ More
Photoexcited metals can produce highly-energetic hot carriers whose controlled generation and extraction is a promising avenue for technological applications. While hot carrier dynamics in Au-group metals have been widely investigated, a microscopic description of the dynamics of photoexcited carriers in the mid-infrared and near-infrared Pt-group metals range is still scarce. Since these materials are widely used in catalysis and, more recently, in plasmonic catalysis, their microscopic carrier dynamics characterization is crucial. We employ \emph{ab initio} many-body perturbation theory to investigate the hot carrier generation, relaxation times, and mean free path in bulk Pd and Pt. We show that the direct optical transitions of photoexcited carriers in this metals are mainly generated in the near-infrared range. We also find that the electron-phonon mass enhancement parameter for Pt is 16 $\%$ higher than Pd, a result that help explains several experimental results showing diverse trends. Moreover, we predict that Pd (Pt) hot electrons possess total relaxation times of up to 35 fs (24 fs), taking place at approximately 0.5 eV (1.0 eV) above the Fermi energy. Finally, an efficient hot electron generation and extraction can be achieved in nanofilms of Pd (110) and Pd (100) when subject to excitation energies ranging from 0.4 to 1.6 eV.
△ Less
Submitted 29 March, 2022;
originally announced March 2022.
-
Quantitative predictions of photo-emission dynamics in metal halide perovskites via machine learning
Authors:
John M. Howard,
Qiong Wang,
Erica Lee,
Richa Lahoti,
Tao Gong,
Meghna Srivastava,
Antonio Abate,
Marina S. Leite
Abstract:
Metal halide perovskite (MHP) optoelectronics may become a viable alternative to standard Si-based technologies, but the current lack of long-term stability precludes their commercial adoption. Exposure to standard operational stressors (light, temperature, bias, oxygen, and water) often instigate optical and electronic dynamics, calling for a systematic investigation into MHP photophysical proces…
▽ More
Metal halide perovskite (MHP) optoelectronics may become a viable alternative to standard Si-based technologies, but the current lack of long-term stability precludes their commercial adoption. Exposure to standard operational stressors (light, temperature, bias, oxygen, and water) often instigate optical and electronic dynamics, calling for a systematic investigation into MHP photophysical processes and the development of quantitative models for their prediction. We resolve the moisture-driven light emission dynamics for both methylammonium lead tribromide and triiodide thin films as a function of relative humidity (rH). With the humidity and photoluminescence time series, we train recurrent neural networks and establish their ability to quantitatively predict the path of future light emission with <11% error over 12 hours. Together, our in situ rH-PL measurements and machine learning forecasting models provide a framework for the rational design of future stable perovskite devices and, thus, a faster transition towards commercial applications.
△ Less
Submitted 7 October, 2020;
originally announced October 2020.
-
Control of hot-carrier relaxation time in Au-Ag thin films through alloying
Authors:
Sarvenaz Memarzadeh,
Kevin J. Palm,
Thomas E. Murphy,
Marina S. Leite,
Jeremy N. Munday
Abstract:
The plasmon resonance of a structure is primarily dictated by its optical properties and geometry, which can be modified to enable hot-carrier photodetectors with superior performance. Recently, metal-alloys have played a prominent role in tuning the resonance of plasmonic structures through chemical composition engineering. However, it has been unclear how alloying modifies the time dynamics of g…
▽ More
The plasmon resonance of a structure is primarily dictated by its optical properties and geometry, which can be modified to enable hot-carrier photodetectors with superior performance. Recently, metal-alloys have played a prominent role in tuning the resonance of plasmonic structures through chemical composition engineering. However, it has been unclear how alloying modifies the time dynamics of generated hot-carriers. In this work, we elucidate the role of chemical composition on the relaxation time of hot-carriers for the archetypal Aux Ag1-x thin-film system. Through time-resolved optical spectroscopy measurements in the visible wavelength range, we measure composition-dependent relaxation times that vary up to 8x for constant pump fluency. Surprisingly, we find that the addition of 2% of Ag into Au films can increase the hot carrier lifetime by approximately 35% under fixed fluence, as a result of a decrease in optical loss. Further, the relaxation time is found to be inversely proportional to the imaginary part of the permittivity. Our results indicate that alloying is a promising approach to effectively control hot-carrier relaxation time in metals.
△ Less
Submitted 30 July, 2020;
originally announced July 2020.
-
Generic anisotropic Lifshitz scalar field theory: masslesslike massive minimal subtraction
Authors:
Marcelo M. Leite
Abstract:
We formulate the simplest minimal subtraction version for massive $λφ^4$ scalar fields with $O(N)$ symmetry for generic anisotropic Lifshitz space-times. An appropriate partial$-p$ operation is applied in the bare two-point vertex function diagrams, which separates the original diagram into a sum of two different integrals which are the coefficients of the corresponding polynomials in the mass and…
▽ More
We formulate the simplest minimal subtraction version for massive $λφ^4$ scalar fields with $O(N)$ symmetry for generic anisotropic Lifshitz space-times. An appropriate partial$-p$ operation is applied in the bare two-point vertex function diagrams, which separates the original diagram into a sum of two different integrals which are the coefficients of the corresponding polynomials in the mass and external momentum. Within the proposed method, the coefficient of the mass terms can be discarded and we obtain a minimal subtraction method almost identical to the same scheme in the massless theory in {\it every external momentum/mass subspace}. We restrict our demonstration of the method up to three-loop order in the two-point vertex part. We verify the consistency of our method by a diagrammatic computation of static critical exponents, which validates the universality hypothesis.
△ Less
Submitted 22 November, 2021; v1 submitted 22 May, 2020;
originally announced May 2020.
-
Masslesslike minimal subtraction for massive scalar field theory
Authors:
Marcelo M. Leite
Abstract:
We introduce the simplest minimal subtraction method for massive $λφ^{4}$ field theory with $O(N)$ internal symmetry, which resembles the same method applied to massless fields by using two steps. First, the utilization of the partial-$p$ operation in every diagram of the two-point vertex part in order to separate it into a sum of squared mass and external momentum, respectively, with different co…
▽ More
We introduce the simplest minimal subtraction method for massive $λφ^{4}$ field theory with $O(N)$ internal symmetry, which resembles the same method applied to massless fields by using two steps. First, the utilization of the partial-$p$ operation in every diagram of the two-point vertex part in order to separate it into a sum of squared mass and external momentum, respectively, with different coefficients. Then, the loop integral which is the coefficient of the quadratic mass can be solved entirely in terms of the mass, no longer depending upon the external momentum, using the {\it parametric dissociation transform}. It consists in the choice of a certain set of fixed values of Feynman parameters replaced inside the remaining loop integral after solving the internal subdiagrams. We check the results in the diagrammatic computation of critical exponents at least up to two-loop order using a flat metric with Euclidean signature.
△ Less
Submitted 5 November, 2021; v1 submitted 21 May, 2020;
originally announced May 2020.
-
New and fast route to black TiO2 based on hollow cathode H2 plasma
Authors:
A. Godoy Jr,
A. L. J. Pereira,
M. C. Gome,
R. S. Pessoa,
D. M. G. Leite,
G. Petraconi Filho,
W. Miyakawa,
A S. da Silva Sobrinho
Abstract:
In this work, we demonstrate a new method to produce black TiO2 from pristine anatase TiO2 films. It consists on the immersion of TiO2 films in a hollow cathode H2 RF plasma for a few minutes, resulting in an efficient blackening of TiO2. In this study, the pristine anatase TiO2 films were grown by magnetron sputtering onto cover glass and c-Si substrates and then annealed at 450 °C for 2 h. Befor…
▽ More
In this work, we demonstrate a new method to produce black TiO2 from pristine anatase TiO2 films. It consists on the immersion of TiO2 films in a hollow cathode H2 RF plasma for a few minutes, resulting in an efficient blackening of TiO2. In this study, the pristine anatase TiO2 films were grown by magnetron sputtering onto cover glass and c-Si substrates and then annealed at 450 °C for 2 h. Before and after the hollow cathode H2 plasma treatment, the samples were characterized by profilometry, UV-Vis spectrophotometry, X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, field emission scanning electron and atomic force microscopies, and four-point probe measurements. The results show that the obtained black TiO2 thin films have a significant light absorption on the whole solar spectrum, a very low sheet resistance, and also a relatively high surface area when compared to the pristine TiO2. All these characteristics lead to an important improvement on their photocatalytic activity, as measured by the degradation rate of methylene blue under UV irradiation.
△ Less
Submitted 10 September, 2019;
originally announced September 2019.
-
Melting of Spin Ice state through structural disorder in Dy2Zr2O7
Authors:
J. G. A. Ramon,
C. W. Wang,
L. Ishida,
P. L. Bernardo,
M. M. Leite,
F. M. Vichi,
J. S. Gardner,
R. S. Freitas
Abstract:
Neutron scattering, a.c. magnetic susceptibility and specific heat studies have been carried out on polycrystalline Dy2Zr2O7. Unlike the pyrochlore spin ice Dy2Ti2O7, Dy2Zr2O7 crystallizes into the fluorite structure and the magnetic Dy3+ moments randomly reside on the corner-sharing tetrahedral sublattice with non-magnetic Zr ions. Antiferromagnetic spin correlations develop below 10 K but remain…
▽ More
Neutron scattering, a.c. magnetic susceptibility and specific heat studies have been carried out on polycrystalline Dy2Zr2O7. Unlike the pyrochlore spin ice Dy2Ti2O7, Dy2Zr2O7 crystallizes into the fluorite structure and the magnetic Dy3+ moments randomly reside on the corner-sharing tetrahedral sublattice with non-magnetic Zr ions. Antiferromagnetic spin correlations develop below 10 K but remain dynamic down to 40 mK. These correlations extend over the length of two tetrahedra edges and grow to 6 nearest neighbors with the application of a 20 kOe magnetic field. No Pauling's residual entropy was observed and by 8 K the full entropy expected for a two level system is released. We propose that the disorder melts the spin ice state seen in the chemically ordered Dy2Ti2O7 compound, but the spins remain dynamic in a disordered, liquid-like state and do not freeze into a glass-like state that one might intuitively expect.
△ Less
Submitted 25 June, 2019;
originally announced June 2019.
-
Fractal and Multifractal Properties of Electrographic Recordings of Human Brain Activity: Toward Its Use as a Signal Feature for Machine Learning in Clinical Applications
Authors:
Lucas G. S. França,
José G. V. Miranda,
Marco Leite,
Niraj K. Sharma,
Matthew C. Walker,
Louis Lemieux,
Yujiang Wang
Abstract:
The brain is a system operating on multiple time scales, and characterisation of dynamics across time scales remains a challenge. One framework to study such dynamics is that of fractal geometry. However, currently there exists no established method for the study of brain dynamics using fractal geometry, due to the many challenges in the conceptual and technical understanding of the methods. We ai…
▽ More
The brain is a system operating on multiple time scales, and characterisation of dynamics across time scales remains a challenge. One framework to study such dynamics is that of fractal geometry. However, currently there exists no established method for the study of brain dynamics using fractal geometry, due to the many challenges in the conceptual and technical understanding of the methods. We aim to highlight some of the practical challenges of applying fractal geometry to brain dynamics and propose solutions to enable its wider use in neuroscience. Using intracranially recorded EEG and simulated data, we compared monofractal and multifractal methods with regards to their sensitivity to signal variance. We found that both correlate closely with signal variance, thus not offering new information about the signal. However, after applying an epoch-wise standardisation procedure to the signal, we found that multifractal measures could offer non-redundant information compared to signal variance, power and other established EEG signal measures. We also compared different multifractal estimation methods and found that the Chhabra-Jensen algorithm performed best. Finally, we investigated the impact of sampling frequency and epoch length on multifractal properties. Using epileptic seizures as an example event in the EEG, we show that there may be an optimal time scale for detecting temporal changes in multifractal properties around seizures. The practical issues we highlighted and our suggested solutions should help in developing a robust method for the application of fractal geometry in EEG signals. Our analyses and observations also aid the theoretical understanding of the multifractal properties of the brain and might provide grounds for new discoveries in the study of brain signals. These could be crucial for understanding of neurological function and for the developments of new treatments.
△ Less
Submitted 11 December, 2018; v1 submitted 11 June, 2018;
originally announced June 2018.
-
Neumann boundary conditions with null external quasi-momenta in finite-systems
Authors:
Messias V. S. Santos,
José B. da Silva Jr.,
Marcelo M. Leite
Abstract:
The order parameter of a critical system defined in a layered parallel plate geometry subject to Neumann boundary conditions at the limiting surfaces is studied. We utilize a one-particle irreducible vertex parts framework in order to study the critical behavior of such a system. The renormalized vertex parts are defined at zero external quasi-momenta, which makes the analysis particularly simple.…
▽ More
The order parameter of a critical system defined in a layered parallel plate geometry subject to Neumann boundary conditions at the limiting surfaces is studied. We utilize a one-particle irreducible vertex parts framework in order to study the critical behavior of such a system. The renormalized vertex parts are defined at zero external quasi-momenta, which makes the analysis particularly simple. The distance between the boundary plates $L$ characterizing the finite size system direction perpendicular to the hyperplanes plays a similar role here in comparison with our recent unified treatment for Neumann and Dirichlet boundary conditions. Critical exponents are computed using diagrammatic expansion at least up to two-loop order and are shown to be identical to those from the bulk theory (limit $L \rightarrow \infty$).
△ Less
Submitted 15 February, 2017; v1 submitted 5 January, 2017;
originally announced January 2017.
-
Unconventional minimal subtraction and Bogoliubov-Parasyuk-Hepp-Zimmermann: massive scalar theory and critical exponents
Authors:
Paulo R. S. Carvalho,
Marcelo M. Leite
Abstract:
We introduce a simpler although unconventional minimal subtraction renormalization procedure in the case of a massive scalar $λφ^{4}$ theory in Euclidean space using dimensional regularization. We show that this method is very similar to its counterpart in massless field theory. In particular, the choice of using the bare mass at higher perturbative order instead of employing its tree-level counte…
▽ More
We introduce a simpler although unconventional minimal subtraction renormalization procedure in the case of a massive scalar $λφ^{4}$ theory in Euclidean space using dimensional regularization. We show that this method is very similar to its counterpart in massless field theory. In particular, the choice of using the bare mass at higher perturbative order instead of employing its tree-level counterpart eliminates all tadpole insertions at that order. As an application, we compute diagrammatically the critical exponents $η$ and $ν$ at least up to two loops. We perform an explicit comparison with the Bogoliubov-Parasyuk-Hepp-Zimmermann ($BPHZ$) method at the same loop order, show that the proposed method requires fewer diagrams and establish a connection between the two approaches.
△ Less
Submitted 5 January, 2017; v1 submitted 5 January, 2017;
originally announced January 2017.
-
Modern finite-size criticality: Dirichlet and Neumann boundary conditions
Authors:
Messias V. S. Santos,
José B. da Silva Jr.,
Marcelo M. Leite
Abstract:
Finite-size critical systems defined on a parallel plate geometry of finite extent along one single ($z$) direction with Dirichlet and Neumann boundary conditions at $z=0,L$ are analyzed in momentum space. We introduce a modified representation for the discrete eigenfunctions in a renormalized one-particle irreducible vertex part ($1PI$) scalar field-theoretic framework using either massless or ma…
▽ More
Finite-size critical systems defined on a parallel plate geometry of finite extent along one single ($z$) direction with Dirichlet and Neumann boundary conditions at $z=0,L$ are analyzed in momentum space. We introduce a modified representation for the discrete eigenfunctions in a renormalized one-particle irreducible vertex part ($1PI$) scalar field-theoretic framework using either massless or massive fields. The appearance of multiplicities in the Feynman rules to construct diagrams due to this choice of representation of the basis functions is discussed along with the modified normalization conditions. For nonvanishing external quasi-momenta, Dirichlet and Neumann boundary conditions are shown to be unified within a single formalism. We examine the dimensional crossover regimes for these and show a correspondence with those from antiperiodic and periodic boundary conditions. It is demonstrated that finite-size effects for Dirichlet and Neumann boundary conditions do not require surface fields necessarily but are implemented nontrivially from the Feynman rules involving only bulk terms in the Lagrangian. As an application, the critical exponents $η$ and $ν$ are evaluated at least up to two-loop level through diagrammatic means. We show that the critical indices are the same as those from the bulk (infinite) system irrespective of the boundary conditions.
△ Less
Submitted 30 December, 2016; v1 submitted 18 September, 2015;
originally announced September 2015.
-
Massive minimal subtraction scheme and "partial-$p$" in anisotropic Lifshitz space(time)s
Authors:
Emanuel V. Souza,
Paulo R. S. Carvalho,
Marcelo M. Leite
Abstract:
We introduce the "partial-$p$" operation in a massive Euclidean $λφ^{4}$ scalar field theory describing anisotropic Lifshitz critical behavior. We then develop a minimal subtraction a la $Bogoliubov-Parasyuk-Hepp-Zimmermann$ renormalization scheme. As an application we compute critical exponents diagrammatically using the orthogonal approximation at least up to two-loop order and show their equiva…
▽ More
We introduce the "partial-$p$" operation in a massive Euclidean $λφ^{4}$ scalar field theory describing anisotropic Lifshitz critical behavior. We then develop a minimal subtraction a la $Bogoliubov-Parasyuk-Hepp-Zimmermann$ renormalization scheme. As an application we compute critical exponents diagrammatically using the orthogonal approximation at least up to two-loop order and show their equivalence with other renormalization techniques. We discuss possible applications of the method in other field-theoretic contexts.
△ Less
Submitted 27 February, 2014;
originally announced February 2014.
-
Functional Mn--Mg$_k$ cation complexes in GaN featured by Raman spectroscopy
Authors:
Thibaut Devillers,
Douglas Marcel Gonçalves Leite,
José Humberto Dias da Silva,
Alberta Bonanni
Abstract:
The evolution of the optical branch in the Raman spectra of (Ga,Mn)N:Mg epitaxial layers as a function of the Mn and Mg concentrations, reveals the interplay between the two dopants. We demonstrate that the various Mn-Mg-induced vibrational modes can be understood in the picture of functional Mn--Mg$_k$ complexes formed when substitutional Mn cations are bound to $k$ substitutional Mg through nitr…
▽ More
The evolution of the optical branch in the Raman spectra of (Ga,Mn)N:Mg epitaxial layers as a function of the Mn and Mg concentrations, reveals the interplay between the two dopants. We demonstrate that the various Mn-Mg-induced vibrational modes can be understood in the picture of functional Mn--Mg$_k$ complexes formed when substitutional Mn cations are bound to $k$ substitutional Mg through nitrogen atoms, the number of ligands $k$ being driven by the ratio between the Mg and the Mn concentrations.
△ Less
Submitted 13 November, 2013;
originally announced November 2013.
-
Electrically Detected Magnetic Resonance Modeling and Fitting: An Equivalent Circuit Approach
Authors:
Douglas M. G. Leite,
Augusto Batagin-Neto,
Oswaldo Nunes-Neto,
Jorge A. Gómez,
Carlos F. O. Graeff
Abstract:
Continuous-wave electrically detected magnetic resonance (cw-EDMR or just EDMR) and its variants are powerful tools to investigate spin-dependent processes in materials and devices. The use of quadrature detection improves the quality and selectivity of EDMR analysis by allowing, for example, the separation of individual resonant spin lines. Here we propose an equivalent circuit model in order to…
▽ More
Continuous-wave electrically detected magnetic resonance (cw-EDMR or just EDMR) and its variants are powerful tools to investigate spin-dependent processes in materials and devices. The use of quadrature detection improves the quality and selectivity of EDMR analysis by allowing, for example, the separation of individual resonant spin lines. Here we propose an equivalent circuit model in order to better understand the EDMR quadrature signal in a variety of different situations. The model considers not just the electrical response of the sample but of cables and measuring circuit and its influence on the resulting spectral lines. Recent EDMR spectra from Alq3 based OLEDs, as well as from a-Si:H reported in the literature, were successfully described by the model. Moreover, the model allows the implementation of a fitting routine that can be easily used to determine accurate values of crucial parameters such as g-factor and linewidth of the resonant lines.
△ Less
Submitted 3 July, 2013;
originally announced July 2013.
-
Susceptibility amplitude ratio for generic competing systems
Authors:
C. F. Farias,
Marcelo M. Leite
Abstract:
We calculate the susceptibility amplitude ratio near a generic higher character Lifshitz point up to one-loop order. We employ a renormalization group treatment with $L$ independent scaling transformations associated to the various inequivalent subspaces in the anisotropic case in order to compute the ratio above and below the critical temperature and demonstrate its universality. Furthermore, the…
▽ More
We calculate the susceptibility amplitude ratio near a generic higher character Lifshitz point up to one-loop order. We employ a renormalization group treatment with $L$ independent scaling transformations associated to the various inequivalent subspaces in the anisotropic case in order to compute the ratio above and below the critical temperature and demonstrate its universality. Furthermore, the isotropic results with only one type of competition axes have also been shown to be universal. We describe how the simpler situations of $m$-axial Lifshitz points as well as ordinary (noncompeting) systems can be retrieved from the present framework.
△ Less
Submitted 20 November, 2011;
originally announced November 2011.
-
Critical exponents from parallel plate geometries subject to periodic and antiperiodic boundary conditions
Authors:
José B. da Silva Jr.,
Marcelo M. Leite
Abstract:
We introduce a renormalized 1PI vertex part scalar field theory setting in momentum space to computing the critical exponents $ν$ and $η$, at least at two-loop order, for a layered parallel plate geometry separated by a distance L, with periodic as well as antiperiodic boundary conditions on the plates. We utilize massive and massless fields in order to extract the exponents in independent ultravi…
▽ More
We introduce a renormalized 1PI vertex part scalar field theory setting in momentum space to computing the critical exponents $ν$ and $η$, at least at two-loop order, for a layered parallel plate geometry separated by a distance L, with periodic as well as antiperiodic boundary conditions on the plates. We utilize massive and massless fields in order to extract the exponents in independent ultraviolet and infrared scaling analysis, respectively, which are required in a complete description of the scaling regions for finite size systems. We prove that fixed points and other critical amounts either in the ultraviolet or in the infrared regime dependent on the plates boundary condition are a general feature of normalization conditions. We introduce a new description of typical crossover regimes occurring in finite size systems. Avoiding these crossovers, the three regions of finite size scaling present for each of these boundary conditions are shown to be indistinguishable in the results of the exponents in periodic and antiperiodic conditions, which coincide with those from the (bulk) infinite system.
△ Less
Submitted 14 April, 2011; v1 submitted 8 March, 2011;
originally announced March 2011.
-
Callan-Symanzik-Lifshitz approach to generic competing systems
Authors:
Paulo R. S. Carvalho,
Marcelo M. Leite
Abstract:
We present the Callan-Symanzik-Lifshitz method to approaching the critical behaviors of systems with arbitrary competing interactions. Every distinct competition subspace in the anisotropic cases define an independent set of renormalized vertex parts via normalization conditions with nonvanishing distinct masses at zero external momenta. Otherwise, only one mass scale is required in the isotropi…
▽ More
We present the Callan-Symanzik-Lifshitz method to approaching the critical behaviors of systems with arbitrary competing interactions. Every distinct competition subspace in the anisotropic cases define an independent set of renormalized vertex parts via normalization conditions with nonvanishing distinct masses at zero external momenta. Otherwise, only one mass scale is required in the isotropic behaviors. At the critical dimension, we prove: i) the existence of the Callan-Symanzik-Lifshitz equations and ii) the multiplicative renormalizability of the vertex functions using the inductive method. Away from the critical dimension, we utilize the orthogonal approximation to compute higher loop Feynman integrals, anisotropic as well as isotropic, necessary to get the exponents $η_{n}$ and $ν_{n}$ at least up to two-loop level. Moreover, we calculate the latter exactly for isotropic behaviors at the same perturbative order. Similarly to the computation in the massless formalism, the orthogonal approximation is found to be exact at one-loop order. The outcome for all critical exponents matches exactly with those computed using the zero mass field-theoretic description renormalized at nonvanishing external momenta.
△ Less
Submitted 11 February, 2009;
originally announced February 2009.
-
Alloying mechanisms for epitaxial nanocrystals
Authors:
M. S. Leite,
G. Medeiros-Ribeiro,
T. I. Kamins,
R. Stanley Williams
Abstract:
The different mechanisms involved in the alloying of epitaxial nanocrystals are reported in this letter. Intermixing during growth, surface diffusion and intra-island diffusion were investigated by varying the growth conditions and annealing environments during chemical vapor deposition. The relative importance of each mechanism was evaluated in determining a particular composition profile for d…
▽ More
The different mechanisms involved in the alloying of epitaxial nanocrystals are reported in this letter. Intermixing during growth, surface diffusion and intra-island diffusion were investigated by varying the growth conditions and annealing environments during chemical vapor deposition. The relative importance of each mechanism was evaluated in determining a particular composition profile for dome-shaped Ge:Si (001) islands. For samples grown at a faster rate, intermixing during growth was reduced. Si surface diffusion dominates during H$_2$ annealing whereas Ge surface diffusion and intra-island diffusion prevail during annealing in a PH$_3$ environment.
△ Less
Submitted 30 January, 2007; v1 submitted 29 January, 2007;
originally announced January 2007.
-
Critical behavior of generic competing systems
Authors:
Marcelo M. Leite
Abstract:
Generic higher character Lifshitz critical behaviors are described using field theory and $ε_{L}$-expansion renormalization group methods. These critical behaviors describe systems with arbitrary competing interactions. We derive the scaling relations and the critical exponents at the two-loop level for anisotropic and isotropic points of arbitrary higher character. The framework is illustrated…
▽ More
Generic higher character Lifshitz critical behaviors are described using field theory and $ε_{L}$-expansion renormalization group methods. These critical behaviors describe systems with arbitrary competing interactions. We derive the scaling relations and the critical exponents at the two-loop level for anisotropic and isotropic points of arbitrary higher character. The framework is illustrated for the $N$-vector $φ^{4}$ model describing a $d$-dimensional system. The anisotropic behaviors are derived in terms of many independent renormalization group transformations, each one characterized by independent correlation lengths. The isotropic behaviors can be understood using only one renormalization group transformation. Feynman diagrams are solved for the anisotropic behaviors using a new dimensional regularization associated to a generalized orthogonal approximation. The isotropic diagrams are treated using this approximation as well as with a new exact technique to compute the integrals. The entire procedure leads to the analytical solution of generic loop order integrals with arbitrary external momenta. The property of universality class reduction is also satisfied when the competing interactions are turned off. We show how the results presented here reduce to the usual $m$-fold Lifshitz critical behaviors for both isotropic and anisotropic criticalities.
△ Less
Submitted 8 November, 2005; v1 submitted 4 February, 2005;
originally announced February 2005.
-
New universality classes for generic higher character Lifshitz points
Authors:
Marcelo M. Leite
Abstract:
We describe new universality classes associated to generic higher character Lifshitz critical behaviors for systems with arbitrary short range competing interactions. New renormalization-group arguments are proposed for anisotropic and isotropic systems. The usual $m$-axial Lifshitz universality classes are obtained as a simple limit of this arbitrary competing critical behavior.
We describe new universality classes associated to generic higher character Lifshitz critical behaviors for systems with arbitrary short range competing interactions. New renormalization-group arguments are proposed for anisotropic and isotropic systems. The usual $m$-axial Lifshitz universality classes are obtained as a simple limit of this arbitrary competing critical behavior.
△ Less
Submitted 22 March, 2004;
originally announced March 2004.
-
Reply to "Comment on Renormalization group picture of the Lifshitz critical behaviors"
Authors:
Marcelo M. Leite
Abstract:
We reply to a recent comment by Diehl and Shpot (cond-mat/0305131) criticizing a new approach to the Lifshitz critical behavior just presented (M. M. Leite Phys. Rev. B 67, 104415(2003)). We show that this approach is free of inconsistencies in the ultraviolet regime. We recall that the orthogonal approximation employed to solve arbitrary loop diagrams worked out at the criticized paper even at…
▽ More
We reply to a recent comment by Diehl and Shpot (cond-mat/0305131) criticizing a new approach to the Lifshitz critical behavior just presented (M. M. Leite Phys. Rev. B 67, 104415(2003)). We show that this approach is free of inconsistencies in the ultraviolet regime. We recall that the orthogonal approximation employed to solve arbitrary loop diagrams worked out at the criticized paper even at three-loop level is consistent with homogeneity for arbitrary loop momenta. We show that the criticism is incorrect.
△ Less
Submitted 10 June, 2003;
originally announced June 2003.
-
Specific heat amplitude ratios for anisotropic Lifshitz critical behaviors
Authors:
Marcelo M. Leite
Abstract:
We determine the specific heat amplitude ratio near a $m$-axial Lifshitz point and show its universal character. Using a recent renormalization group picture along with new field-theoretical $ε_{L}$-expansion techniques, we established this amplitude ratio at one-loop order. We estimate the numerical value of this amplitude ratio for $m=1$ and $d=3$. The result is in very good agreement with its…
▽ More
We determine the specific heat amplitude ratio near a $m$-axial Lifshitz point and show its universal character. Using a recent renormalization group picture along with new field-theoretical $ε_{L}$-expansion techniques, we established this amplitude ratio at one-loop order. We estimate the numerical value of this amplitude ratio for $m=1$ and $d=3$. The result is in very good agreement with its experimental measurement on the magnetic material $MnP$. It is shown that in the limit $m \to 0$ it trivially reduces to the Ising-like amplitude ratio.
△ Less
Submitted 3 April, 2003;
originally announced April 2003.
-
A new picture of the Lifshitz critical behavior
Authors:
Marcelo M. Leite
Abstract:
New field theoretic renormalization group methods are developed to describe in a unified fashion the critical exponents of an m-fold Lifshitz point at the two-loop order in the anisotropic (m not equal to d) and isotropic (m=d close to 8) situations. The general theory is illustrated for the N-vector phi^4 model describing a d-dimensional system. A new regularization and renormalization procedur…
▽ More
New field theoretic renormalization group methods are developed to describe in a unified fashion the critical exponents of an m-fold Lifshitz point at the two-loop order in the anisotropic (m not equal to d) and isotropic (m=d close to 8) situations. The general theory is illustrated for the N-vector phi^4 model describing a d-dimensional system. A new regularization and renormalization procedure is presented for both types of Lifshitz behavior. The anisotropic cases are formulated with two independent renormalization group transformations. The description of the isotropic behavior requires only one type of renormalization group transformation. We point out the conceptual advantages implicit in this picture and show how this framework is related to other previous renormalization group treatments for the Lifshitz problem. The Feynman diagrams of arbitrary loop-order can be performed analytically provided these integrals are considered to be homogeneous functions of the external momenta scales. The anisotropic universality class (N,d,m) reduces easily to the Ising-like (N,d) when m=0. We show that the isotropic universality class (N,m) when m is close to 8 cannot be obtained from the anisotropic one in the limit d --> m near 8. The exponents for the uniaxial case d=3, N=m=1 are in good agreement with recent Monte Carlo simulations for the ANNNI model.
△ Less
Submitted 2 September, 2002; v1 submitted 26 August, 2002;
originally announced August 2002.
-
Reply on "Lifshitz-point critical behaviour to $O(ε_L^2)$"
Authors:
Luiz C. de Albuquerque,
Marcelo M. Leite
Abstract:
We reply to a recent comment by H. W. Diehl and M. Shpot (cond-mat/0106502) criticizing our paper J. Phys. A: Math. Gen. 34 (2001) L327-332. We show that the approximation we use for evaluating higher-loop integrals is consistent with homogeneity. A new renormalization group approach is presented in order to compare the two methods with high-precision numerical data concerning the uniaxial case.…
▽ More
We reply to a recent comment by H. W. Diehl and M. Shpot (cond-mat/0106502) criticizing our paper J. Phys. A: Math. Gen. 34 (2001) L327-332. We show that the approximation we use for evaluating higher-loop integrals is consistent with homogeneity. A new renormalization group approach is presented in order to compare the two methods with high-precision numerical data concerning the uniaxial case. We stress that the isotropic behaviour cannot be obtained from the anisotropic one.
△ Less
Submitted 19 November, 2001; v1 submitted 15 August, 2001;
originally announced August 2001.
-
Anisotropic Lifshitz Point at $O(ε_L^2)$
Authors:
Luiz C. de Albuquerque,
Marcelo M. Leite
Abstract:
We present the critical exponents $ν_{L2}$, $η_{L2}$ and $γ_{L}$ for an $m$-axial Lifshitz point at second order in an $ε_{L}$ expansion. We introduced a constraint involving the loop momenta along the $m$-dimensional subspace in order to perform two- and three-loop integrals. The results are valid in the range $0 \leq m < d$. The case $m=0$ corresponds to the usual Ising-like critical behavior.
We present the critical exponents $ν_{L2}$, $η_{L2}$ and $γ_{L}$ for an $m$-axial Lifshitz point at second order in an $ε_{L}$ expansion. We introduced a constraint involving the loop momenta along the $m$-dimensional subspace in order to perform two- and three-loop integrals. The results are valid in the range $0 \leq m < d$. The case $m=0$ corresponds to the usual Ising-like critical behavior.
△ Less
Submitted 15 August, 2001;
originally announced August 2001.
-
Uniaxial Lifshitz Point at $O(ε_L^2)$
Authors:
Luiz C. de Albuquerque,
Marcelo M. Leite
Abstract:
The critical exponents $ν_{L2}, η_{L2}$ and $γ_{L2}$ of a uniaxial Lifshitz point are calculated at two-loop level using renormalization group and $ε_{L}$-expansion techniques. We found a new constraint involving the loop momenta along the competition axis, which allows to solve the two-loop integrals. The exponent $γ_{L2}$ obtained using our method is in good agreement with numerical estimates…
▽ More
The critical exponents $ν_{L2}, η_{L2}$ and $γ_{L2}$ of a uniaxial Lifshitz point are calculated at two-loop level using renormalization group and $ε_{L}$-expansion techniques. We found a new constraint involving the loop momenta along the competition axis, which allows to solve the two-loop integrals. The exponent $γ_{L2}$ obtained using our method is in good agreement with numerical estimates based on Monte Carlo simulations.
△ Less
Submitted 13 December, 2001; v1 submitted 29 June, 2000;
originally announced June 2000.
-
Susceptibility Amplitude Ratios Near a Lifshitz Point
Authors:
Marcelo M. Leite
Abstract:
The susceptibility amplitude ratio in the neighborhood of a uniaxial Lifshitz point is calculated at one-loop level using field-theoretic and $ε_{L}$-expansion methods. We use the Schwinger parametrization of the propagator in order to split the quadratic and quartic part of the momenta, as well as a new special symmetry point suitable for renormalization purposes. For a cubic lattice (d = 3), w…
▽ More
The susceptibility amplitude ratio in the neighborhood of a uniaxial Lifshitz point is calculated at one-loop level using field-theoretic and $ε_{L}$-expansion methods. We use the Schwinger parametrization of the propagator in order to split the quadratic and quartic part of the momenta, as well as a new special symmetry point suitable for renormalization purposes. For a cubic lattice (d = 3), we find the result $\frac{C_{+}}{C_{-}} = 3.85$.
△ Less
Submitted 13 October, 1999;
originally announced October 1999.
-
Amplitude Ratios and the Approach to Bulk Criticality in Parallel Plate Geometries
Authors:
M. M. Leite,
M. Sardelich,
M. D. Coutinho-Filho
Abstract:
We present analytical and numerical results for the specific heat and susceptibility amplitude ratios in parallel plate geometries. The results are derived using field-theoretic techniques suitable to describe the system in the bulk limit. Advantages and drawbacks of our method are discussed on the light of other approaches previously reported in the literature.
We present analytical and numerical results for the specific heat and susceptibility amplitude ratios in parallel plate geometries. The results are derived using field-theoretic techniques suitable to describe the system in the bulk limit. Advantages and drawbacks of our method are discussed on the light of other approaches previously reported in the literature.
△ Less
Submitted 2 September, 1998;
originally announced September 1998.
