-
Trap-Integrated Superconducting Nanowire Single-Photon Detectors with Improved RF Tolerance for Trapped-Ion Qubit State Readout
Authors:
Benedikt Hampel,
Daniel H. Slichter,
Dietrich Leibfried,
Richard P. Mirin,
Sae Woo Nam,
Varun B. Verma
Abstract:
State readout of trapped-ion qubits with trap-integrated detectors can address important challenges for scalable quantum computing, but the strong rf electric fields used for trapping can impact detector performance. Here, we report on NbTiN superconducting nanowire single-photon detectors (SNSPDs) employing grounded aluminum mirrors as electrical shielding that are integrated into linear surface-…
▽ More
State readout of trapped-ion qubits with trap-integrated detectors can address important challenges for scalable quantum computing, but the strong rf electric fields used for trapping can impact detector performance. Here, we report on NbTiN superconducting nanowire single-photon detectors (SNSPDs) employing grounded aluminum mirrors as electrical shielding that are integrated into linear surface-electrode rf ion traps. The shielded SNSPDs can be successfully operated at applied rf trapping potentials of up to $\mathrm{54\,V_{peak}}$ at $\mathrm{70\,MHz}$ and temperatures of up to $\mathrm{6\,K}$, with a maximum system detection efficiency of $\mathrm{68\,\%}$. This performance should be sufficient to enable parallel high-fidelity state readout of a wide range of trapped ion species in typical cryogenic apparatus.
△ Less
Submitted 2 February, 2023;
originally announced February 2023.
-
State Readout of a Trapped Ion Qubit Using a Trap-Integrated Superconducting Photon Detector
Authors:
S. L. Todaro,
V. B. Verma,
K. C. McCormick,
D. T. C. Allcock,
R. P. Mirin,
D. J. Wineland,
S. W. Nam,
A. C. Wilson,
D. Leibfried,
D. H. Slichter
Abstract:
We report high-fidelity state readout of a trapped ion qubit using a trap-integrated photon detector. We determine the hyperfine qubit state of a single $^9$Be$^+$ ion held in a surface-electrode rf ion trap by counting state-dependent ion fluorescence photons with a superconducting nanowire single-photon detector (SNSPD) fabricated into the trap structure. The average readout fidelity is 0.9991(1…
▽ More
We report high-fidelity state readout of a trapped ion qubit using a trap-integrated photon detector. We determine the hyperfine qubit state of a single $^9$Be$^+$ ion held in a surface-electrode rf ion trap by counting state-dependent ion fluorescence photons with a superconducting nanowire single-photon detector (SNSPD) fabricated into the trap structure. The average readout fidelity is 0.9991(1), with a mean readout duration of 46 $μ$s, and is limited by the polarization impurity of the readout laser beam and by off-resonant optical pumping. Because there are no intervening optical elements between the ion and the detector, we can use the ion fluorescence as a self-calibrated photon source to determine the detector quantum efficiency and its dependence on photon incidence angle and polarization.
△ Less
Submitted 31 July, 2020;
originally announced August 2020.
-
Measurements of trapped-ion heating rates with exchangeable surfaces in close proximity
Authors:
D. A. Hite,
K. S. McKay,
S. Kotler,
D. Leibfried,
D. J. Wineland,
D. P. Pappas
Abstract:
Electric-field noise from the surfaces of ion-trap electrodes couples to the ion's charge causing heating of the ion's motional modes. This heating limits the fidelity of quantum gates implemented in quantum information processing experiments. The exact mechanism that gives rise to electric-field noise from surfaces is not well-understood and remains an active area of research. In this work, we de…
▽ More
Electric-field noise from the surfaces of ion-trap electrodes couples to the ion's charge causing heating of the ion's motional modes. This heating limits the fidelity of quantum gates implemented in quantum information processing experiments. The exact mechanism that gives rise to electric-field noise from surfaces is not well-understood and remains an active area of research. In this work, we detail experiments intended to measure ion motional heating rates with exchangeable surfaces positioned in close proximity to the ion, as a sensor to electric-field noise. We have prepared samples with various surface conditions, characterized in situ with scanned probe microscopy and electron spectroscopy, ranging in degrees of cleanliness and structural order. The heating-rate data, however, show no significant differences between the disparate surfaces that were probed. These results suggest that the driving mechanism for electric-field noise from surfaces is due to more than just thermal excitations alone.
△ Less
Submitted 17 January, 2017;
originally announced January 2017.
-
UV-sensitive superconducting nanowire single photon detectors for integration in an ion trap
Authors:
D. H. Slichter,
V. B. Verma,
D. Leibfried,
R. P. Mirin,
S. W. Nam,
D. J. Wineland
Abstract:
We demonstrate superconducting nanowire single photon detectors with 76 +/- 4 % system detection efficiency at a wavelength of 315 nm and an operating temperature of 3.2 K, with a background count rate below 1 count per second at saturated detection efficiency. We propose integrating these detectors into planar surface electrode radio-frequency Paul traps for use in trapped ion quantum information…
▽ More
We demonstrate superconducting nanowire single photon detectors with 76 +/- 4 % system detection efficiency at a wavelength of 315 nm and an operating temperature of 3.2 K, with a background count rate below 1 count per second at saturated detection efficiency. We propose integrating these detectors into planar surface electrode radio-frequency Paul traps for use in trapped ion quantum information processing. We operate detectors integrated into test ion trap structures at 3.8 K both with and without typical radio-frequency trapping electric fields. The trapping fields reduce system detection efficiency by 9 %, but do not increase background count rates.
△ Less
Submitted 10 April, 2017; v1 submitted 29 November, 2016;
originally announced November 2016.
-
Optimized magnetic lattices for ultracold atomic ensembles
Authors:
Roman Schmied,
Dietrich Leibfried,
Robert J. C. Spreeuw,
Shannon Whitlock
Abstract:
We introduce a general method for designing tailored lattices of magnetic microtraps for ultracold atoms, on the basis of patterned permanently magnetized films. A fast numerical algorithm is used to automatically generate patterns which provide optimal atom confinement while respecting desired lattice symmetries and trap parameters. The algorithm can produce finite and infinite lattices of any pl…
▽ More
We introduce a general method for designing tailored lattices of magnetic microtraps for ultracold atoms, on the basis of patterned permanently magnetized films. A fast numerical algorithm is used to automatically generate patterns which provide optimal atom confinement while respecting desired lattice symmetries and trap parameters. The algorithm can produce finite and infinite lattices of any plane symmetry; we focus specifically on square and triangular lattices which are of interest to future experiments. Typical trap parameters are discussed as well as the impact of realistic imperfections such as finite lithographic resolution and magnetic inhomogeneity. The presented designer lattices open new avenues for quantum simulation and quantum information processing with ultracold atoms on atom chips.
△ Less
Submitted 23 June, 2010;
originally announced June 2010.
-
Passive Cooling of a Micromechanical Oscillator with a Resonant Electric Circuit
Authors:
K. R. Brown,
J. Britton,
R. J. Epstein,
J. Chiaverini,
D. Leibfried,
D. J. Wineland
Abstract:
We cool the fundamental mode of a miniature cantilever by capacitively coupling it to a driven rf resonant circuit. Cooling results from the rf capacitive force, which is phase shifted relative to the cantilever motion. We demonstrate the technique by cooling a 7 kHz cantilever from room temperature to 45 K, obtaining reasonable agreement with a model for the cooling, damping, and frequency shif…
▽ More
We cool the fundamental mode of a miniature cantilever by capacitively coupling it to a driven rf resonant circuit. Cooling results from the rf capacitive force, which is phase shifted relative to the cantilever motion. We demonstrate the technique by cooling a 7 kHz cantilever from room temperature to 45 K, obtaining reasonable agreement with a model for the cooling, damping, and frequency shift. Extending the method to higher frequencies in a cryogenic system could enable ground state cooling and may prove simpler than related optical experiments in a low temperature apparatus.
△ Less
Submitted 26 September, 2007; v1 submitted 8 May, 2007;
originally announced May 2007.
-
Cantilever cooling with radio frequency circuits
Authors:
D. J. Wineland,
J. Britton,
R. J. Epstein,
D. Leibfried,
R. B. Blakestad,
K. Brown,
J. D. Jost,
C. Langer,
R. Ozeri,
S. Seidelin,
J. Wesenberg
Abstract:
We consider a method to reduce the kinetic energy in a low-order mode of a miniature cantilever. If the cantilever contributes to the capacitance of a driven RF circuit, a force on the cantilever exists due to the electric field energy stored in the capacitance. If this force acts with an appropriate phase shift relative to the motion of the cantilever, it can oppose the velocity of the cantilev…
▽ More
We consider a method to reduce the kinetic energy in a low-order mode of a miniature cantilever. If the cantilever contributes to the capacitance of a driven RF circuit, a force on the cantilever exists due to the electric field energy stored in the capacitance. If this force acts with an appropriate phase shift relative to the motion of the cantilever, it can oppose the velocity of the cantilever, leading to cooling. Such cooling may enable reaching the quantum regime of cantilever motion.
△ Less
Submitted 21 June, 2006;
originally announced June 2006.
