-
Analytical model for balling defects in laser melting using rivulet theory and solidification
Authors:
Zane Taylor,
Tharun Reddy,
Maureen Fitzpatrick,
Kwan Kim,
Wei Li,
Chu Lun Alex Leung,
Peter D. Lee,
Kaila M. Bertsch,
Leora Dresselhaus-Marais
Abstract:
In the laser welding and additive manufacturing (AM) communities, the balling defect is primarily attributed to the action of fluid instabilities with a few authors suggesting other mechanisms. Without commenting on the validity of the fluid instability driven \textit{mechanism} of balling in AM, this work intends to present the most realistic analytical discussion of the balling defect driven pur…
▽ More
In the laser welding and additive manufacturing (AM) communities, the balling defect is primarily attributed to the action of fluid instabilities with a few authors suggesting other mechanisms. Without commenting on the validity of the fluid instability driven \textit{mechanism} of balling in AM, this work intends to present the most realistic analytical discussion of the balling defect driven purely by fluid instabilities. Synchrotron-based X-ray radiography of thin samples indicate that fluid instability growth rates and solidification can be comparable in magnitude and thus compete. Neglecting the action of fluid flows and heat transport, this work presents an analytical formalism which accounts for fluid instabilities and solidification competition, giving a continuous transition from balling to non-balling which is lacking in current literature. We adapt a Rivulet instability model from the fluid physics community to account for the stabilizing effects of the substrate which the Plateau-Rayleigh instability model does not account for, and estimate the instability growth rate. Our model predicts instability growth at higher wavelengths and shallower melt pool depths relative to width, as well as strong sensitivity to the solidification front curvature. Deviations between model predictions and our experimental results demonstrate the importance of fluid flows and heat transport in the balling process. Our experiments further demonstrate at least one mechanism by which the melt pool length and balling wavelength are not equivalent, as commonly claimed.
△ Less
Submitted 21 April, 2025; v1 submitted 18 February, 2025;
originally announced February 2025.
-
High Resolution 3D Strain and Orientation Mapping within a Grain of a Directed Energy Deposition Laser Additively Manufactured Superalloy
Authors:
Y. Chen,
Y. T. Tang,
D. M. Collins,
S. J. Clark,
W. Ludwig,
R. Rodriguez-Lamas,
C. Detlefs,
R. C. Reed,
P. D. Lee,
P. J. Withers,
C. Yildirim
Abstract:
The industrialization of Laser Additive Manufacturing (LAM) is challenged by the undesirable microstructures and high residual stresses originating from the fast and complex solidification process. Non-destructive assessment of the mechanical performance controlling deformation patterning is therefore critical. Here, we use Dark Field X-ray Microscopy (DFXM) to non-destructively map the 3D intragr…
▽ More
The industrialization of Laser Additive Manufacturing (LAM) is challenged by the undesirable microstructures and high residual stresses originating from the fast and complex solidification process. Non-destructive assessment of the mechanical performance controlling deformation patterning is therefore critical. Here, we use Dark Field X-ray Microscopy (DFXM) to non-destructively map the 3D intragranular orientation and strain variations throughout a surface breaking grain within a directed energy deposition nickel superalloy. DFXM results reveal a highly heterogenous 3D microstructure in terms of the local orientation and lattice strain. The grain comprises $\approx$ 5$μ$m-sized cells with alternating strain states, as high as 5 $\times 10^{-3}$, and orientation differences <0.5° . The DFXM results are compared to Electron Backscatter Diffraction measurements of the same grain from its cut-off surface. We discuss the microstructure developments during LAM, rationalising the development of the deformation patterning from the extreme thermal gradients during processing and the susceptibility for solute segregation.
△ Less
Submitted 8 March, 2023;
originally announced March 2023.
-
Solid-liquid interface free energy through metadynamics simulations
Authors:
Stefano Angioletti-Uberti,
Michele Ceriotti,
Mike W. Finnis,
Peter D. Lee
Abstract:
The solid-liquid interface free energy γsl is a key parameter controlling nucleation and growth during solidification and other phenomena. There are intrinsic difficulties in obtaining accurate experimental values, and the previous approaches to compute γsl with atomistic simulations are computationally demanding. We propose a new approach, which is to obtain γsl from a free energy map of the phas…
▽ More
The solid-liquid interface free energy γsl is a key parameter controlling nucleation and growth during solidification and other phenomena. There are intrinsic difficulties in obtaining accurate experimental values, and the previous approaches to compute γsl with atomistic simulations are computationally demanding. We propose a new approach, which is to obtain γsl from a free energy map of the phase transition reconstructed by metadynamics. We apply this to the benchmark case of a Lennard-Jones potential and the results confirm the most reliable data obtained previously. We demonstrate several advantages of our new approach: it is simple to implement, robust and free of hysteresis problems, it allows a rigorous and unbiased estimate of the statistical uncertainty and it returns a good estimate of of the thermodynamic limit with system sizes of a just a few hundred atoms. It is therefore attractive for using with more realistic and specific models of interatomic forces.
△ Less
Submitted 19 May, 2010; v1 submitted 13 November, 2009;
originally announced November 2009.
