-
Influence of particle size on ice nucleation and growth during the freeze-casting process
Authors:
Sylvain Deville,
Eric Maire,
Audrey Lasalle,
Agnès Bogner,
Catherine Gauthier,
Jérôme Leloup,
Christian Guizard
Abstract:
The solidification behaviour of suspensions of alumina particles during directional solidification is investigated here by in situ observations using X-ray radiography and tomography. The objective of this study is to assess the influence of particle size on the solidification behaviour of the suspensions during the early stages of solidification. Four powders with particle size in the range 0.2-3…
▽ More
The solidification behaviour of suspensions of alumina particles during directional solidification is investigated here by in situ observations using X-ray radiography and tomography. The objective of this study is to assess the influence of particle size on the solidification behaviour of the suspensions during the early stages of solidification. Four powders with particle size in the range 0.2-3.4μm (median size) were investigated. Solidification is obtained by cooling at a constant rate, starting from room temperature. Attention is specifically paid to the nucleation and growth behaviour of the ice crystals in these suspensions. We propose that the nucleation of ice crystals is controlled by the particle size, the surface of the particles acting as nucleation sites. Smaller particle size leads to a lower degree of supercooling since nucleation and growth can proceed at higher temperature than with larger particles. The initial interface velocity is dependent on the degree of supercooling, and controls the extent of the initial structural gradient in the resulting porous materials.
△ Less
Submitted 29 March, 2018;
originally announced May 2018.
-
Investigating the dispersion state of alumina suspensions: contribution of Cryo-FEGSEM characterizations
Authors:
Audrey Lasalle,
Christian Guizard,
Sylvain Deville,
Fabrice Rossignol,
Pierre Carles
Abstract:
We illustrate in this paper the interest of cryo scanning electron microscopy (cryo-FEGSEM) to investigate the stability of alumina suspensions. The stability is investigated through viscosity, zeta potential, total organic carbon measurements and cryo-FEGSEM observations. We focus on two examples: the effect of the quantity of ammonium polyacrylate as dispersant and the effect of its chain length…
▽ More
We illustrate in this paper the interest of cryo scanning electron microscopy (cryo-FEGSEM) to investigate the stability of alumina suspensions. The stability is investigated through viscosity, zeta potential, total organic carbon measurements and cryo-FEGSEM observations. We focus on two examples: the effect of the quantity of ammonium polyacrylate as dispersant and the effect of its chain length on alumina particles dispersion with a solid content of 32vol%. In the first example for some suspensions we measure values of viscosity or zeta potential too similar to discriminate the best state of dispersion. To overcome this problem we directly observe the suspensions with Cryo-FEGSEM. We take advantage of the recent developments of the technique, which provide now extremely high cooling rates and ensure that the freezing step does not induce observations artifacts related to the formation of ice. This technique provides an accurate vision of particles dispersion, agglomeration in ceramic suspensions and it is possible to visualize the excess of dispersant. In the second example the longer dispersant appears to be the more effective to obtain the best state of dispersion. Through both examples, we demonstrate that to have the best interpretation of results it is useful to combine direct observations by Cryo-FEGSEM and the usual properties measurements.
△ Less
Submitted 29 March, 2018;
originally announced April 2018.
-
Metastable and Unstable Cellular Solidification of Colloidal Suspensions
Authors:
Sylvain Deville,
Eric Maire,
Guillaume Bernard-Granger,
Audrey Lasalle,
Agnès Bogner,
Catherine Gauthier,
Jérôme Leloup,
Christian Guizard
Abstract:
Colloidal particles are often seen as big atoms that can be directly observed in real space. They are therefore playing an increasingly important role as model systems to study processes of interest in condensed matter physics such as melting, freezing and glass transitions. The solidification of colloidal suspensions has long been a puzzling phenomenon with many unexplained features. Here we demo…
▽ More
Colloidal particles are often seen as big atoms that can be directly observed in real space. They are therefore playing an increasingly important role as model systems to study processes of interest in condensed matter physics such as melting, freezing and glass transitions. The solidification of colloidal suspensions has long been a puzzling phenomenon with many unexplained features. Here we demonstrate and rationalize the existence of instability and metastability domains in cellular solidification of colloidal suspensions, by direct in situ high-resolution X-ray radiography and tomography observations. We explain such interface instabilities by a partial Brownian diffusion of the particles leading to constitutional supercooling situations. Processing under unstable conditions leads to localized and global kinetic instabilities of the solid/liquid interface, affecting the crystals morphology and particle redistribution behaviour.
△ Less
Submitted 29 March, 2018;
originally announced April 2018.
-
Dynamics of the freezing front during the solidification of a colloidal alumina aqueous suspension: in situ X-ray radiography, tomography and modeling
Authors:
Andrea Bareggi,
Eric Maire,
Audrey Lasalle,
Sylvain Deville
Abstract:
Ice templating of colloidal suspension is gaining interest in material science because it offers the possibility to shape advanced materials, and in particular porous ceramics. Recent investigations on this peculiar process show that a correlation between the morphology of the frozen suspension and the velocity of the freezing front do exist. The dynamics of the freezing front of a colloidal suspe…
▽ More
Ice templating of colloidal suspension is gaining interest in material science because it offers the possibility to shape advanced materials, and in particular porous ceramics. Recent investigations on this peculiar process show that a correlation between the morphology of the frozen suspension and the velocity of the freezing front do exist. The dynamics of the freezing front of a colloidal suspension of alumina is investigated in the present study by experimental tests, finite element numerical analysis and theoretical analytical calculations. The experimental tests are carried out by in situ X-ray radiography (investigation of the dynamics of the freezing front) and tomography (investigation of the resulting morphology of the frozen suspension). The finite element model is a continuous properties model; it is used for investigating the dynamics and the shape of the freezing front. The analytical model is based on the two-phase Stefan problem. We propose a solution for the dynamics of the solidification front based on the calculation of the diffusivity as a function of the particle fraction and local temperature.
△ Less
Submitted 29 March, 2018;
originally announced April 2018.
-
In Situ X-Ray Radiography and Tomography Observations of the Solidification of Alumina Particles Suspensions. Part I: Initial Instants
Authors:
Sylvain Deville,
Eric Maire,
Audrey Lasalle,
Agnès Bogner,
Catherine Gauthier,
Jérôme Leloup,
Christian Guizard
Abstract:
This paper investigates by in situ high-resolution X-ray radiography and tomography the behaviour of colloidal suspensions of alumina particles during directional solidification by freezing. The combination of these techniques provided both qualitative and quantitative information about the propagation kinetic of the solid/liquid interface, the particles redistribution between the crystals and a p…
▽ More
This paper investigates by in situ high-resolution X-ray radiography and tomography the behaviour of colloidal suspensions of alumina particles during directional solidification by freezing. The combination of these techniques provided both qualitative and quantitative information about the propagation kinetic of the solid/liquid interface, the particles redistribution between the crystals and a particle enriched phase and the 3D organisation of the ice crystals. In this first part of two companion papers, the precursor phenomena leading to directional crystallisation during the first instants of solidification is studied. Mullins-Sekerka instabilities are not necessary to explain the dynamic evolution of the interface pattern. Particle redistribution during these first instants is dependent on the type of crystals growing into the suspension. The insights gained into the mechanisms of solidification of colloidal suspensions may be valuable for the materials processing routes derived for this type of directional solidification (freeze-casting), and of general interest for those interested in the interactions between solidification fronts and inert particles.
△ Less
Submitted 13 October, 2017;
originally announced October 2017.
-
In Situ X-Ray Radiography and Tomography Observations of the Solidification of Alumina Particles Suspensions. Part II: Steady State
Authors:
Sylvain Deville,
Eric Maire,
Audrey Lasalle,
Agnès Bogner,
Catherine Gauthier,
Jérôme Leloup,
C. Guizard
Abstract:
This paper investigates the behaviour of colloidal suspensions of alumina particles during directional solidification, by in situ high-resolution observations using X-ray radiography and tomography. This second part is focussed on the evolution of ice crystals during steady state growth (in terms of interface velocity) and on the particles redistribution taking place in this regime. In particular,…
▽ More
This paper investigates the behaviour of colloidal suspensions of alumina particles during directional solidification, by in situ high-resolution observations using X-ray radiography and tomography. This second part is focussed on the evolution of ice crystals during steady state growth (in terms of interface velocity) and on the particles redistribution taking place in this regime. In particular, it is shown that diffusion cannot determine the concentration profile and the particles redistribution in this regime of interface velocities (20-40 microns/s); constitutional supercooling arguments cannot be invoked to interpret particles redistribution. Particles are redistributed by a direct interaction with the moving solidification interface. Several parameters controlling the particles redistribution were identified, namely the interface velocity, the particle size, the shape of the ice crystals and the orientation relationships between the crystals and the temperature gradient.
△ Less
Submitted 13 October, 2017;
originally announced October 2017.
