-
A hydrodynamic bifurcation in electroosmotically-driven periodic flows
Authors:
Alexander Morozov,
Davide Marenduzzo,
Ronald G. Larson
Abstract:
In this paper we report a novel inertial instability that occurs in electro-osmotically driven channel flows. We assume that the charge motion under the influence of an externally applied electric field is confined to a small vicinity of the channel walls that, effectively, drives a bulk flow through a prescribed slip velocity at the boundaries. Here, we study spatially-periodic wall velocity modu…
▽ More
In this paper we report a novel inertial instability that occurs in electro-osmotically driven channel flows. We assume that the charge motion under the influence of an externally applied electric field is confined to a small vicinity of the channel walls that, effectively, drives a bulk flow through a prescribed slip velocity at the boundaries. Here, we study spatially-periodic wall velocity modulations in a two-dimensional straight channel numerically. At low slip velocities, the bulk flow consists of a set of vortices along each wall that are left-right symmetric, while at sufficiently high slip velocities, this flow loses its stability though a supercritical bifurcation. Surprisingly, the new flow state that bifurcates from a left-right symmetric base flow has a rather strong mean component along the channel, which is similar to pressure-driven velocity profiles. The instability sets in at rather small Reynolds numbers of about 20-30, and we discuss its potential applications in microfluidic devices.
△ Less
Submitted 24 August, 2017;
originally announced August 2017.
-
A rheological state diagram for rough colloids in shear flow
Authors:
Lilian C. Hsiao,
Safa Jamali,
Daniel J. Beltran-Villegas,
Emmanouil Glynos,
Peter F. Green,
Ronald G. Larson,
Michael J. Solomon
Abstract:
The flow of dense suspensions, glasses, and granular materials is heavily influenced by frictional interactions between constituent particles. However, neither hydrodynamics nor friction has successfully explained the full range of flow phenomena in concentrated suspensions. Particles with asperities represent a case in point. Lubrication hydrodynamics fail to completely capture two key rheologica…
▽ More
The flow of dense suspensions, glasses, and granular materials is heavily influenced by frictional interactions between constituent particles. However, neither hydrodynamics nor friction has successfully explained the full range of flow phenomena in concentrated suspensions. Particles with asperities represent a case in point. Lubrication hydrodynamics fail to completely capture two key rheological properties - namely, that the viscosity increases drastically and the first normal stress difference can switch signs as volume fraction increases. Yet, simulations that account for interparticle friction are also unable to fully predict these properties. Furthermore, experiments show that rheological behavior can vary depending on particle roughness and deformability. We seek to resolve these apparent contradictions by systematically tuning the roughness of model colloids, investigating their viscosity and first normal stress differences under steady shear, and finally generating a rheological state diagram that demonstrates how surface roughness influences the transition between shear thickening and dilatancy. Our simulations, which are in good agreement with the experiments, suggest that friction between rough particles is significant. In addition, we find that roughness progressively lowers the critical conditions required for the onset of shear thickening and dilatancy. Our results thus provides a major contribution in the field of suspension rheology with broad relevance to granular and particulate materials. For instance, particle geometry can be tuned to increase the efficacy of materials that turn solid-like on the application of stimuli. On the other hand, engineers who work with concentrated slurries can now use images of the constituent particles to estimate optimal flow processing conditions.
△ Less
Submitted 28 October, 2016;
originally announced October 2016.
-
Modeling the Relaxation of Polymer Glasses under Shear and Elongational Loads
Authors:
S. M. Fielding,
R. L. Moorcroft,
R. G. Larson,
M. E. Cates
Abstract:
Glassy polymers show strain hardening: at constant extensional load, their flow first accelerates, then arrests. Recent experiments under such loading have found this to be accompanied by a striking dip in the segmental relaxation time. This can be explained by a minimal nonfactorable model combining flow-induced melting of a glass with the buildup of stress carried by strained polymers. Within th…
▽ More
Glassy polymers show strain hardening: at constant extensional load, their flow first accelerates, then arrests. Recent experiments under such loading have found this to be accompanied by a striking dip in the segmental relaxation time. This can be explained by a minimal nonfactorable model combining flow-induced melting of a glass with the buildup of stress carried by strained polymers. Within this model, liquefaction of segmental motion permits strong flow that creates polymer-borne stress, slowing the deformation enough for the segmental (or solvent) modes to then re-vitrify. Here we present new results for the corresponding behavior under step-stress shear loading, to which very similar physics applies. To explain the unloading behavior in the extensional case requires introduction of a crinkle factor describing a rapid loss of segmental ordering. We discuss in more detail here the physics of this, which we argue involves non-entropic contributions to the polymer stress, and which might lead to some important differences between shear and elongation. We also discuss some fundamental and possibly testable issues concerning the physical meaning of entropic elasticity in vitrified polymers. Finally we present new results for the startup of steady shear flow, addressing the possible role of transient shear banding.
△ Less
Submitted 5 September, 2012;
originally announced September 2012.
-
A Simple Model for the Deformation-Induced Relaxation of Glassy Polymers
Authors:
S. M. Fielding,
R. G. Larson,
M. E. Cates
Abstract:
Glassy polymers show strain hardening: at constant extensional load, their flow first accelerates, then arrests. Recent experiments have found this to be accompanied by a striking and unexplained dip in the segmental relaxation time. Here we explain such behavior by combining a minimal model of flow-induced liquefaction of a glass, with a description of the stress carried by strained polymers, cre…
▽ More
Glassy polymers show strain hardening: at constant extensional load, their flow first accelerates, then arrests. Recent experiments have found this to be accompanied by a striking and unexplained dip in the segmental relaxation time. Here we explain such behavior by combining a minimal model of flow-induced liquefaction of a glass, with a description of the stress carried by strained polymers, creating a non-factorable interplay between aging and strain-induced rejuvenation. Under constant load, liquefaction of segmental motion permits strong flow that creates polymer-borne stress. This slows the deformation enough for the segmental modes to re-vitrify, causing strain hardening.
△ Less
Submitted 18 October, 2011;
originally announced October 2011.
-
Efficient models for micro-swimmers
Authors:
Nobuhiko Watari,
Ronald G. Larson
Abstract:
We propose minimal models of one-, two- and three-dimensional micro-swimmers at low Reynolds number with a periodic non-reciprocal motion. These swimmers are either "pushers" or "pullers" of fluid along the swimming axis, or combination of the two, depending on the history of the swimming motion. We show this with a linear three-bead swimmer by analytically evaluating the migration speed and the s…
▽ More
We propose minimal models of one-, two- and three-dimensional micro-swimmers at low Reynolds number with a periodic non-reciprocal motion. These swimmers are either "pushers" or "pullers" of fluid along the swimming axis, or combination of the two, depending on the history of the swimming motion. We show this with a linear three-bead swimmer by analytically evaluating the migration speed and the strength of the dipolar flow induced by its swimming motion. It is found that the distance traveled per cycle and the dipolar flow can be obtained from an integral over the area enclosed by the trajectory of the cycle projected onto a cross-plot of the two distances between beads. Two- and three-dimensional model swimmers can tumble by breaking symmetry of the swimming motion with respect to the swimming axis, as occurs in the tumbling motion of Escherichia coli or Chlamydomonas, which desynchronize the motions of their flagella to reorient the swimming direction. We also propose a five-bead model of a "corkscrew swimmer", i.e. with a helical flagellum and a rotary motor attached to the cell body. Our five-bead swimmer is attracted to a nearby wall, where it swims clockwise as observed in experiments with bacteria with helical flagella.
△ Less
Submitted 29 April, 2010;
originally announced April 2010.
-
Glass Rheology: From mode-coupling theory to a dynamical yield criterion
Authors:
J. M. Brader,
Th. Voigtmann,
M. Fuchs,
R. G. Larson,
M. E. Cates
Abstract:
The mode coupling theory (MCT) of glasses, while offering an incomplete description of glass transition physics, represents the only established route to first-principles prediction of rheological behavior in nonergodic materials such as colloidal glasses. However, the constitutive equations derivable from MCT are somewhat intractable, hindering their practical use and also their interpretation.…
▽ More
The mode coupling theory (MCT) of glasses, while offering an incomplete description of glass transition physics, represents the only established route to first-principles prediction of rheological behavior in nonergodic materials such as colloidal glasses. However, the constitutive equations derivable from MCT are somewhat intractable, hindering their practical use and also their interpretation. Here, we present a schematic (single-mode) MCT model which incorporates the tensorial structure of the full theory. Using it, we calculate the dynamic yield surface for a large class of flows.
△ Less
Submitted 28 September, 2009;
originally announced September 2009.
