-
Polarized Neutron Measurements of the Internal Magnetization of a Ferrimagnet Across its Compensation Temperature
Authors:
C. D. Hughes,
K. N. Lopez,
T. Mulkey,
B. Hill,
J. C. Long,
M. Sarsour,
M. Van Meter,
S. Samiei,
D. V. Baxter,
W. M. Snow,
L. M. Lommel,
M. Luxnat,
Y. Zhang,
C. Jiang,
E. Stringfellow,
P. Zolnierczuk,
M. Frost,
M. Odom
Abstract:
We present the first polarized neutron transmission image of a model Neel ferrimagnetic material, polycrystalline terbium iron garnet (Tb3Fe5O12, TbIG for short), as it is taken through its compensation temperature Tcomp where the macroscopic magnetization vanishes. Our polarized neutron imaging data and the additional supporting measurements using neutron spin echo spectroscopy and SQUID magnetom…
▽ More
We present the first polarized neutron transmission image of a model Neel ferrimagnetic material, polycrystalline terbium iron garnet (Tb3Fe5O12, TbIG for short), as it is taken through its compensation temperature Tcomp where the macroscopic magnetization vanishes. Our polarized neutron imaging data and the additional supporting measurements using neutron spin echo spectroscopy and SQUID magnetometry are all consistent with a vanishing internal magnetization at Tcomp.
△ Less
Submitted 11 April, 2025; v1 submitted 27 August, 2024;
originally announced August 2024.
-
All-optical seeding of a light-induced phase transition with correlated disorder
Authors:
Allan S. Johnson,
Ernest Pastor,
Sergi Batlle-Porro,
Hind Benzidi,
Tetsuo Katayama,
Gilberto A. de la Peña Muñoz,
Viktor Krapivin,
Sunam Kim,
Núria López,
Mariano Trigo,
Simon E. Wall
Abstract:
Ultrafast manipulation of vibrational coherence is an emergent route to control the structure of solids. However, this strategy can only induce long-range correlations and cannot modify atomic structure locally, which is required in many technologically-relevant phase transitions. Here, we demonstrate that ultrafast lasers can generate incoherent structural fluctuations which are more efficient fo…
▽ More
Ultrafast manipulation of vibrational coherence is an emergent route to control the structure of solids. However, this strategy can only induce long-range correlations and cannot modify atomic structure locally, which is required in many technologically-relevant phase transitions. Here, we demonstrate that ultrafast lasers can generate incoherent structural fluctuations which are more efficient for material control than coherent vibrations, extending optical control to a wider range of materials. We observe that local, non-equilibrium lattice distortions generated by a weak laser pulse reduce the energy barrier to switch between insulating and metallic states in vanadium dioxide by 6%. Seeding inhomogeneous structural-fluctuations presents an alternative, more energy efficient, route for controlling materials that may be applicable to all solids, including those used in data and energy storage devices.
△ Less
Submitted 23 September, 2023;
originally announced September 2023.
-
Mixed excitonic nature in water-oxidized BiVO$_4$ surfaces with defects
Authors:
Rachel Steinitz-Eliyahu,
Daniel Hernangómez-Pérez,
Franziska S. Hegner,
Pavle Nikačević,
Núria López,
Sivan Refaely-Abramson
Abstract:
BiVO$_4$ is a promising photocatalyst for efficient water oxidation, with surface reactivity determined by the structure of active catalytic sites. Surface oxidation in the presence of oxygen vacancies induces electron localization, suggesting an atomistic route to improve the charge transfer efficiency within the catalytic cycle. In this work, we study the effect of oxygen vacancies on the electr…
▽ More
BiVO$_4$ is a promising photocatalyst for efficient water oxidation, with surface reactivity determined by the structure of active catalytic sites. Surface oxidation in the presence of oxygen vacancies induces electron localization, suggesting an atomistic route to improve the charge transfer efficiency within the catalytic cycle. In this work, we study the effect of oxygen vacancies on the electronic and optical properties at BiVO$_4$ surfaces upon water oxidation. We use density functional theory and many-body perturbation theory to explore the change in the electronic and quasiparticle energy levels and to evaluate the electron-hole coupling as a function of the underlying structure. We show that while the presence of defects alters the atomic structure and largely modifies the wavefunction nature, leading to defect-localized states at the quasipatricle gap region, the optical excitations remain largely unchanged due to substantial hybridization of defect and non-defect electron-hole transitions. Our findings suggest that defect-induced surface oxidation supports improved electron transport, both through bound and tunable electronic states and via a mixed nature of the optical transitions, expected to reduce electron-hole defect trapping.
△ Less
Submitted 13 March, 2022;
originally announced March 2022.
-
Cerium Oxides without $U$: The Role of Many-Electron Correlation
Authors:
Tobias Schäfer,
Nathan Daelman,
Núria López
Abstract:
Electron transfer with changing occupation in the 4f subshell poses a considerable challenge for quantitative predictions in quantum chemistry. Using the example of cerium oxide, we identify the main deficiencies of common parameter-dependent one-electron approaches, such as density functional theory (DFT) with a Hubbard correction, or hybrid functionals. As a response, we present the first benchm…
▽ More
Electron transfer with changing occupation in the 4f subshell poses a considerable challenge for quantitative predictions in quantum chemistry. Using the example of cerium oxide, we identify the main deficiencies of common parameter-dependent one-electron approaches, such as density functional theory (DFT) with a Hubbard correction, or hybrid functionals. As a response, we present the first benchmark of ab initio many-electron theory for electron transfer energies and lattice parameters under periodic boundary conditions. We show that the direct random phase approximation clearly outperforms all DFT variations. From this foundation, we, then, systematically improve even further. Periodic second-order Møller-Plesset perturbation theory meanwhile manages to recover standard hybrid functional values. Using these approaches to eliminate parameter bias allows for highly accurate benchmarks of strongly correlated materials, the reliable assessment of various density functionals, and functional fitting via machine-learning.
△ Less
Submitted 6 December, 2021;
originally announced December 2021.
-
H$_{2}$-diluted precursors for GaAs doping in chemical beam epitaxy
Authors:
K. Ben Saddik,
A. F. Braña,
N. López,
B. J. García,
S. Fernández-Garrido
Abstract:
A wide range of n- and p-type doping levels in GaAs layers grown by chemical beam epitaxy is achieved using H$_{2}$-diluted DTBSi and CBr$_{4}$ as gas precursors for Si and C. We show that the doping level can be varied by modifying either the concentration or the flux of the diluted precursor. Specifically, we demonstrate carrier concentrations of 6$\times$10$^{17}$-1.2$\times$10$^{19}$ cm…
▽ More
A wide range of n- and p-type doping levels in GaAs layers grown by chemical beam epitaxy is achieved using H$_{2}$-diluted DTBSi and CBr$_{4}$ as gas precursors for Si and C. We show that the doping level can be varied by modifying either the concentration or the flux of the diluted precursor. Specifically, we demonstrate carrier concentrations of 6$\times$10$^{17}$-1.2$\times$10$^{19}$ cm$^{-3}$ for Si, and 9$\times$10$^{16}$-3.7$\times$10$^{20}$ cm$^{-3}$ for C, as determined by Hall effect measurements. The incorporation of Si and C as a function of the flux of the corresponding diluted precursor is found to follow, respectively, a first and a fourth order power law. The dependence of the electron and hole mobility values on the carrier concentration as well as the analysis of the layers by low-temperature (12 K) photoluminescence spectroscopy indicate that the use of H$_{2}$ for diluting DTBSi or CBr$_{4}$ has no effect on the electrical and optical properties of GaAs.
△ Less
Submitted 25 February, 2021;
originally announced February 2021.
-
The strange metal Hall effect connects quantum criticality and superconductivity in an iron-based superconductor
Authors:
Ian M. Hayes,
Nikola Maksimovic,
Mun K. Chan,
Gilbert N. Lopez,
B. J. Ramshaw,
Ross D. McDonald,
James G. Analytis
Abstract:
Many unconventional superconductors exhibit a common set of anomalous charge transport properties that characterize them as `strange metals', which provides hope that there is single theory that describes them. However, model-independent connections between the strange metal and superconductivity have remained elusive. In this letter, we show that the Hall effect of the unconventional superconduct…
▽ More
Many unconventional superconductors exhibit a common set of anomalous charge transport properties that characterize them as `strange metals', which provides hope that there is single theory that describes them. However, model-independent connections between the strange metal and superconductivity have remained elusive. In this letter, we show that the Hall effect of the unconventional superconductor BaFe$_2$(As$_{1-x}$P$_x$)$_2$ contains an anomalous contribution arising from the correlations within the strange metal. This term has a distinctive dependence on magnetic field, which allows us to track its behavior across the doping-temperature phase diagram, even under the superconducting dome. These measurements demonstrate that the strange metal Hall component emanates from a quantum critical point and, in the zero temperature limit, decays in proportion to the superconducting critical temperature. This creates a clear and novel connection between quantum criticality and superconductivity, and suggests that similar connections exist in other strange metal superconductors.
△ Less
Submitted 12 December, 2019;
originally announced December 2019.
-
Lattice mismatch as the descriptor of segregation, stability and reactivity of supported thin catalyst films
Authors:
Edvin Fako,
Ana S. Dobrota,
Igor A. Pašti,
Núria López,
Slavko V. Mentus,
Natalia V. Skorodumova
Abstract:
Increasing demand and high prices of advanced catalysts motivate a constant search for novel active materials with reduced content of noble metals. The development of thin films and core-shell catalysts seem to be a promising strategy along this path. Using Density Functional Theory we have analyzed a number of surface properties of supported bimetallic thin films with composition A3B (where A = P…
▽ More
Increasing demand and high prices of advanced catalysts motivate a constant search for novel active materials with reduced content of noble metals. The development of thin films and core-shell catalysts seem to be a promising strategy along this path. Using Density Functional Theory we have analyzed a number of surface properties of supported bimetallic thin films with composition A3B (where A = Pt, Pd, B = Cu, Ag, Au). We focus on surface segregation, dissolution stability and surface electronic structure. We also address the chemisorption properties of Pd3Au thin films supported by different substrates, by probing the surface reactivity with CO. We find a strong influence of the support in the case of mono- and bilayers, while the surface strain seems to be the predominant factor in determining the surface properties of supported trilayers and thicker films. In particular, we show that the studied properties of the supported trilayers can be predicted from the lattice mismatch between the overlayer and the support. Namely, if the strain dependence of the corresponding quantities for pure strained surfaces is known, the properties of strained supported trilayers can be reliably estimated. The obtained results can be used in the design of novel catalysts and predictions of the surface properties of supported ultrathin catalyst layers.
△ Less
Submitted 30 November, 2017; v1 submitted 27 October, 2017;
originally announced October 2017.
-
Low temperature synthesis of heterostructures of transition metal dichalcogenide alloys (WxMo1-xS2) and graphene with superior catalytic performance for hydrogen evolution
Authors:
Yu Lei,
Srimanta Pakhira,
Kazunori Fujisawa,
Xuyang Wang,
Oluwagbenga Oare Iyiola,
Nestor Perea Lopez,
Ana Laura Elias,
Lakshmy Pulickal Rajukumar,
Chanjing Zhou,
Bernd Kabius,
Nasim Alem,
Morinobu Endo,
Ruitao Lv,
Jose L. Mendoza-Cortes,
Mauricio Terrones
Abstract:
Large-area ($\sim$cm$^2$) films of vertical heterostructures formed by alternating graphene and transition-metal dichalcogenide(TMD) alloys are obtained by wet chemical routes followed by a thermal treatment at low temperature (300 $^\circ$C). In particular, we synthesized stacked graphene and W$_x$Mo$_{1-x}$S$_2$ alloy phases that were used as hydrogen evolution catalysts. We observed a Tafel slo…
▽ More
Large-area ($\sim$cm$^2$) films of vertical heterostructures formed by alternating graphene and transition-metal dichalcogenide(TMD) alloys are obtained by wet chemical routes followed by a thermal treatment at low temperature (300 $^\circ$C). In particular, we synthesized stacked graphene and W$_x$Mo$_{1-x}$S$_2$ alloy phases that were used as hydrogen evolution catalysts. We observed a Tafel slope of 38.7 mV dec$^{-1}$ and 96 mV onset potential (at current density of 10 mA cm$^{-2}$) when the heterostructure alloy is annealed at 300 $^o$C. These results indicate that heterostructure formed by graphene and W$_{0.4}$Mo$_{0.6}$S$_2$ alloys are far more efficient than WS$_2$ and MoS$_2$ by at least a factor of two, and it is superior than any other reported TMD system. This strategy offers a cheap and low temperature synthesis alternative able to replace Pt in the hydrogen evolution reaction (HER). Furthermore, the catalytic activity of the alloy is stable over time, i.e. the catalytic activity does not experience a significant change even after 1000 cycles. Using density functional theory calculations, we found that this enhanced hydrogen evolution in the W$_x$Mo$_{1-x}$S$_2$ alloys is mainly due to the lower energy barrier created by a favorable overlap of the d-orbitals from the transition metals and the s-orbitals of H$_2$, with the lowest energy barrier occurring for W$_{0.4}$Mo$_{0.6}$S$_2$ alloy. Thus, it is now possible to further improve the performance of the "inert" TMD basal plane via metal alloying, in addition to the previously reported strategies of creation of point defects, vacancies and edges. The synthesis of graphene/W$_{0.4}$Mo$_{0.6}$S$_2$ produced at relatively low temperatures is scalable and could be used as an effective low cost Pt-free catalyst.
△ Less
Submitted 5 May, 2017; v1 submitted 24 March, 2017;
originally announced March 2017.
-
Imaging surface plasmon polaritons using proximal self-assembled InGaAs quantum dots
Authors:
Gregor Bracher,
Konrad Schraml,
Mäx Blauth,
Jakob Wierzbowski,
Nicolas Coca Lopez,
Max Bichler,
Kai Müller,
Jonathan J. Finley,
Michael Kaniber
Abstract:
We present optical investigations of hybrid plasmonic nanosystems consisting of lithographically defined plasmonic Au-waveguides or beamsplitters on GaAs substrates coupled to proximal self-assembled InGaAs quantum dots. We designed a sample structure that enabled us to precisely tune the distance between quantum dots and the sample surface during nano-fabrication and demonstrated that non-radiati…
▽ More
We present optical investigations of hybrid plasmonic nanosystems consisting of lithographically defined plasmonic Au-waveguides or beamsplitters on GaAs substrates coupled to proximal self-assembled InGaAs quantum dots. We designed a sample structure that enabled us to precisely tune the distance between quantum dots and the sample surface during nano-fabrication and demonstrated that non-radiative processes do not play a major role for separations down to $\sim 10 nm$. A polarized laser beam focused on one end of the plasmonic nanostructure generates propagating surface plasmon polaritons that, in turn, create electron-hole pairs in the GaAs substrate during propagation. These free carriers are subsequently captured by the quantum dots $\sim 25 nm$ below the surface, giving rise to luminescence. The intensity of the spectrally integrated quantum dot luminescence is used to image the propagating plasmon modes. As the waveguide width reduces from $5 μm$ to $1 μm$, we clearly observe different plasmonic modes at the remote waveguide end, enabling their direct imaging in real space. This imaging technique is applied to a plasmonic beamsplitter facilitating the determination of the splitting ratio between the two beamsplitter output ports as the interaction length $L_i$ is varied. A splitting ratio of $50:50$ is observed for $L_i\sim 9\pm1 μm$ and $1 μm$ wide waveguides for excitation energies close to the GaAs band edge. Our experimental findings are in good agreement with mode profile and finite difference time domain simulations for both waveguides and beamsplitters.
△ Less
Submitted 26 May, 2014;
originally announced May 2014.