Showing 1–50 of 55 results for author: Kuzmin, A

Pressure-Induced Decomposition of beta-SnWO4

Authors: Sergio Ferrari, Daniel Diaz-Anichtchenko, Pablo Botella, Jordi Ibáñez, Robert Oliva, Alexei Kuzmin, Alfonso Muñoz, Frederico Alabarse, Daniel Errandonea

Abstract: This study reports the decomposition of beta-SnWO4 into Sn, SnO2, and WO3 induced by static compression. We performed high-pressure synchrotron powder angle-dispersive X-ray diffraction measurements and found that decomposition occurs at a pressure of 13.97(5) GPa and is irreversible. This result contradicts a previous study that, based on density-functional theory calculations and crystal-chemist… ▽ More This study reports the decomposition of beta-SnWO4 into Sn, SnO2, and WO3 induced by static compression. We performed high-pressure synchrotron powder angle-dispersive X-ray diffraction measurements and found that decomposition occurs at a pressure of 13.97(5) GPa and is irreversible. This result contradicts a previous study that, based on density-functional theory calculations and crystal-chemistry arguments, predicted a pressure-driven transition from beta-SnWO4 to alpha-SnWO4. Our analysis indicates that the observed decomposition is unrelated to mechanical or dynamic instabilities. Instead, it likely stems from frustration of the beta-alpha transition, as this transformation requires a change in Sn coordination from octahedral to tetrahedral. The assessment of how pressure influences the volume of the unit cell provided an accurate determination of the room-temperature pressure-volume equation of state for beta-SnWO4. Furthermore, the elastic constants and moduli, as well as the pressure dependence of Raman and infrared modes of beta-SnWO4, were derived from density-functional theory calculations. Several phonon modes exhibited softening, and three cases of phonon anti-crossing were observed. △ Less

Submitted 5 June, 2025; originally announced June 2025.

Comments: 26 pages, 9 figures, 4 tables

Journal ref: Results in Physics 74, 108304 (2025)

Identification of the high-pressure phases of alpha-SnWO4 combining x-ray diffraction and crystal structure prediction

Authors: Daniel Diaz-Anichtchenko, Jordi Ibáñez, Pablo Botella, Robert Oliva, Alexei Kuzmin, Li Wang, Yuwei Li, Alfonso Muñoz, Frederico Alabarse, Daniel Errandonea

Abstract: We have characterized the high-pressure behavior of alpha-SnWO4. The compound has been studied up to 30 GPa using a diamond-anvil cell and synchrotron powder X-ray diffraction. We report evidence of two structural phase transitions in the pressure range covered in our study, and we propose a crystal structure for the two high-pressure phases. The first one, observed around 12.9 GPa, has been obtai… ▽ More We have characterized the high-pressure behavior of alpha-SnWO4. The compound has been studied up to 30 GPa using a diamond-anvil cell and synchrotron powder X-ray diffraction. We report evidence of two structural phase transitions in the pressure range covered in our study, and we propose a crystal structure for the two high-pressure phases. The first one, observed around 12.9 GPa, has been obtained combining indexation using DICVOL and density-functional theory calculations. The second high-pressure phase, observed around 17.5 GPa, has been determined by using the CALYPSO code, the prediction of which was supported by a Le Bail fit to the experimental X-ray diffraction patterns. The proposed structural sequence involves two successive collapses of the unit-cell volume and an increase in the coordination number of Sn and W atoms. The room-temperature equations of state, the principal axes of compression and their compressibility, the elastic constants, and the elastic moduli are reported for α-SnWO4 and for the two high-pressure phases. △ Less

Submitted 5 June, 2025; originally announced June 2025.

Comments: 20 pages, 8 figures, 7 tables

Journal ref: Physica B 696, 416666 (2025)

Phase stabilization and phase tuning of an optical lattice with a variable period

Authors: P. A. Aksentsev, V. A. Khlebnikov, I. S. Cojocaru, A. E. Rudnev, I. A. Pyrkh, D. A. Kumpilov, P. V. Trofimova, A. M. Ibrahimov, O. I. Blokhin, K. O. Frolov, S. A. Kuzmin, A. K. Zykova, D. A. Pershin, V. V. Tsyganok, A. V. Akimov

Abstract: Optical lattices play a significant role in the field of cold atom physics, particularly in quantum simulations. Varying the lattice period is often a useful feature, but it presents the challenge of maintaining lattice phase stability in both stationary and varying-period regimes. Here, we report the realization of a feedback loop for a tunable optical lattice. Our scheme employs a CCD camera, a… ▽ More Optical lattices play a significant role in the field of cold atom physics, particularly in quantum simulations. Varying the lattice period is often a useful feature, but it presents the challenge of maintaining lattice phase stability in both stationary and varying-period regimes. Here, we report the realization of a feedback loop for a tunable optical lattice. Our scheme employs a CCD camera, a computer, and a piezoelectric actuator mounted on a mirror. Using this setup, we significantly improved the long-term stability of an optical lattice over durations exceeding 10 seconds. More importantly, we demonstrated a rapid change in the optical lattice period without any loss of phase. △ Less

Submitted 4 June, 2025; originally announced June 2025.

Factor of 1000 suppression of the depolarization rate in ultracold thulium collisions

Authors: I. A. Pyrkh, A. E. Rudnev, D. A. Kumpilov, I. S. Cojocaru, V. A. Khlebnikov, P. A. Aksentsev, A. M. Ibrahimov, K. O. Frolov, S. A. Kuzmin, A. K. Zykova, D. A. Pershin, V. V. Tsyganok, A. V. Akimov

Abstract: Lanthanides are nowadays extensively used to investigate the properties of strongly correlated matter. Nevertheless, exploiting the Zeeman manifold of a lanthanide atom ground state is challenging due to the unavoidable presence of depolarization collisions. Here we demonstrate that in the case of the thulium atom, it is possible to suppress this depolarization by a factor of 1000 with a carefully… ▽ More Lanthanides are nowadays extensively used to investigate the properties of strongly correlated matter. Nevertheless, exploiting the Zeeman manifold of a lanthanide atom ground state is challenging due to the unavoidable presence of depolarization collisions. Here we demonstrate that in the case of the thulium atom, it is possible to suppress this depolarization by a factor of 1000 with a carefully tuned magnetic field thus opening the way for the efficient use of the Zeeman manifold in quantum simulations. △ Less

Submitted 27 May, 2025; originally announced May 2025.

Scalable solution chemical synthesis and comprehensive analysis of Bi2Te3 and Sb2Te3

Authors: Bejan Hamawandi, Parva Parsa, Inga Pudza, Kaspars Pudzs, Alexei Kuzmin, Sedat Ballikaya, Edmund Welter, Rafal Szukiewicz, Maciej Kuchowicz, Muhammet S. Toprak

Abstract: Thermoelectric (TE) materials can directly convert heat into electrical energy. However, they sustain costly production procedures and batch-to-batch performance variations. Therefore, developing scalable synthetic techniques for large-scale and reproducible quality TE materials is critical for advancing TE technology. This study developed a facile, high throughput, solution-chemical synthetic tec… ▽ More Thermoelectric (TE) materials can directly convert heat into electrical energy. However, they sustain costly production procedures and batch-to-batch performance variations. Therefore, developing scalable synthetic techniques for large-scale and reproducible quality TE materials is critical for advancing TE technology. This study developed a facile, high throughput, solution-chemical synthetic technique. Microwave-assisted thermolysis process, providing energy-efficient volumetric heating, was used for the synthesis of bismuth and antimony telluride (Bi2Te3, Sb2Te3). As-made materials were characterized using various techniques, including XRPD, SEM, TEM, XAS, and XPS. Detailed investigation of the local atomic structure of the synthesized Bi2Te3 and Sb2Te3 powder samples was conducted through synchrotron radiation XAS experiments. The sintered TE materials exhibited low thermal conductivity, achieving the highest TE figure-of-merit values of 0.7 (573 K) and 0.9 (523 K) for n-type Bi2Te3 and p-type Sb2Te3, respectively, shifted significantly to the high-temperature region when compared to earlier reports, highlighting their potential for power generation applications. The scalable, energyand time-efficient synthetic method developed, along with the demonstration of its potential for TE materials, opens the door for a wider application of these materials with minimal environmental impact. △ Less

Submitted 12 March, 2025; originally announced March 2025.

Mangnon-Phonon-Photon Interactions in Cubic Ferromagnets in the Vicinity of Orientational Phase Transition: Retrospective and Phenomenological Study

Authors: I. V. Bychkov, D. A. Kuzmin, V. A. Tolkachev, V. D. Buchelnikov, V. G. Shavrov

Abstract: This work presents a comprehensive theoretical investigation of magnon-phonon-photon interactions in cubic ferromagnets near orientational phase transitions (OPT). The study focuses on the interplay of magnetoelastic (ME), electromagnetic-spin (EMS), and acousticelectromagnetic (AEM) interactions in ferromagnetic dielectrics and metals. By deriving dispersion equations for coupled waves, the resea… ▽ More This work presents a comprehensive theoretical investigation of magnon-phonon-photon interactions in cubic ferromagnets near orientational phase transitions (OPT). The study focuses on the interplay of magnetoelastic (ME), electromagnetic-spin (EMS), and acousticelectromagnetic (AEM) interactions in ferromagnetic dielectrics and metals. By deriving dispersion equations for coupled waves, the research reveals how the dynamic properties of magnetically ordered crystals evolve in response to these interactions under varying external magnetic fields and near OPT points. The ME interaction prominently influences spin and elastic wave dynamics, giving rise to coupled modes such as quasimagnon and quasi-acoustic waves. Near the OPT, these interactions become dominant, leading to phenomena like the magnetoelastic gap and softening of vibrational modes. The EMS interaction significantly alters the activation energy and dispersion of quasi-spin and quasi-electromagnetic waves. In ferromagnetic metals, helicons (weakly damped electromagnetic waves) exhibit strong coupling with spin and elastic waves, particularly in the OPT region. The study identifies conditions for triple resonance among spin, elastic, and electromagnetic waves. Additionally, it explores the frequency-dependent rotation of polarization planes in electromagnetic and magnetoelastic waves, which sharpens near OPT points. These results provide a deeper understanding of the coupled dynamics in ferromagnetic materials, paving the way for new technological applications in spintronics, signal processing, and advanced magneto-optical devices. The theoretical framework developed here emphasizes the critical role of ME, EMS, and AEM interactions in tailoring wave properties for specific applications, particularly in designing next-generation magnetic and electronic systems. △ Less

Submitted 10 January, 2025; originally announced January 2025.

Comments: 34 pages, 6 figures, submitted to Journal of Applied Physics

A New Bite Into Dark Matter with the SNSPD-Based QROCODILE Experiment

Authors: Laura Baudis, Alexander Bismark, Noah Brugger, Chiara Capelli, Ilya Charaev, Jose Cuenca García, Guy Daniel Hadas, Yonit Hochberg, Judith K. Hohmann, Alexander Kavner, Christian Koos, Artem Kuzmin, Benjamin V. Lehmann, Severin Nägeli, Titus Neupert, Bjoern Penning, Diego Ramírez García, Andreas Schilling

Abstract: We present the first results from the Quantum Resolution-Optimized Cryogenic Observatory for Dark matter Incident at Low Energy (QROCODILE). The QROCODILE experiment uses a microwire-based superconducting nanowire single-photon detector (SNSPD) as a target and sensor for dark matter scattering and absorption, and is sensitive to energy deposits as low as 0.11 eV. We introduce the experimental conf… ▽ More We present the first results from the Quantum Resolution-Optimized Cryogenic Observatory for Dark matter Incident at Low Energy (QROCODILE). The QROCODILE experiment uses a microwire-based superconducting nanowire single-photon detector (SNSPD) as a target and sensor for dark matter scattering and absorption, and is sensitive to energy deposits as low as 0.11 eV. We introduce the experimental configuration and report new world-leading constraints on the interactions of sub-MeV dark matter particles with masses as low as 30 keV. The thin-layer geometry of the system provides anisotropy in the interaction rate, enabling directional sensitivity. In addition, we leverage the coupling between phonons and quasiparticles in the detector to simultaneously constrain interactions with both electrons and nucleons. We discuss the potential for improvements to both the energy threshold and effective volume of the experiment in the coming years. △ Less

Submitted 6 February, 2025; v1 submitted 20 December, 2024; originally announced December 2024.

Comments: 5+3 pages, 2+2 figures. v2: minor update to fig. 2

Report number: MIT-CTP/5744

6 -- X-ray absorption spectroscopy in high-entropy material research

Authors: Alexei Kuzmin

Abstract: This chapter introduces the use of X-ray absorption spectroscopy (XAS) in studying the local electronic and atomic structure of high-entropy materials. The element selectivity of XAS makes it particularly suitable to address the challenges posed by the study of multicomponent compounds. By analysing different parts of the X-ray absorption spectra for each element, one can obtain information on its… ▽ More This chapter introduces the use of X-ray absorption spectroscopy (XAS) in studying the local electronic and atomic structure of high-entropy materials. The element selectivity of XAS makes it particularly suitable to address the challenges posed by the study of multicomponent compounds. By analysing different parts of the X-ray absorption spectra for each element, one can obtain information on its chemical state from the X-ray absorption near-edge structure (XANES) and its local environment, distortions, and lattice dynamics from the extended X-ray absorption fine structure (EXAFS). The theoretical background underlying X-ray absorption spectra and existing data analysis procedures are briefly described, with particular emphasis on advanced atomistic modelling techniques that enable more reliable extraction of structural information. Finally, an overview of the applications of the XAS technique in studying high-entropy materials is presented. △ Less

Submitted 8 November, 2024; originally announced November 2024.

Comments: Chpt 6 of "High-Entropy Alloys: Design, Manufacturing, and Emerging Applications"

Journal ref: in High-Entropy Alloys: Design, Manufacturing, and Emerging Applications, G. Yasin, M. Abubaker Khan, M. Afifi, T. Anh Nguyen, Y. Zhang (Eds.), pp. 121-155 (Elsevier, 2024)

The use of the correlated Debye model for EXAFS-based thermometry in bcc and fcc metals

Authors: Alexei Kuzmin, Vitalijs Dimitrijevs, Inga Pudza, Aleksandr Kalinko

Abstract: Extended X-ray absorption fine structure (EXAFS) spectra are sensitive to thermal disorder and are often used to probe local lattice dynamics. Variations in interatomic distances induced by atomic vibrations are described by the temperature-dependent mean-square relative displacement (MSRD), also known as the Debye-Waller factor. In this study, we evaluated the feasibility of addressing the invers… ▽ More Extended X-ray absorption fine structure (EXAFS) spectra are sensitive to thermal disorder and are often used to probe local lattice dynamics. Variations in interatomic distances induced by atomic vibrations are described by the temperature-dependent mean-square relative displacement (MSRD), also known as the Debye-Waller factor. In this study, we evaluated the feasibility of addressing the inverse problem, i.e., determining the sample temperature from the analysis of its EXAFS spectrum using the multiple-scattering formalism, considering contributions up to the 4th-7th coordination shell. The method was tested on several monatomic metals (bcc Cr, Mo, and W; fcc Cu and Ag), where the correlated Debye model of lattice dynamics provides a fairly accurate description of thermal disorder effects up to distant coordination shells. We found that the accuracy of the method strongly depends on the temperature range. The method fails at low temperatures, where quantum effects dominate and MSRD values change only slightly. However, it becomes more accurate at higher temperatures, where the MSRD shows a near-linear dependence on temperature. △ Less

Submitted 25 October, 2024; originally announced October 2024.

Temperature-dependent local structure and lattice dynamics of 1T-TiSe$_2$ and 1T-VSe$_2$ probed by X-ray absorption spectroscopy

Authors: Inga Pudza, Boris Polyakov, Kaspars Pudzs, Edmund Welter, Alexei Kuzmin

Abstract: The local atomic structure and lattice dynamics of two isostructural layered transition metal dichalcogenides (TMDs), 1T-TiSe$_2$ and 1T-VSe$_2$, were studied using temperature-dependent X-ray absorption spectroscopy at the Ti, V, and Se K-edges. Analysis of the extended X-ray absorption fine structure (EXAFS) spectra, employing reverse Monte Carlo (RMC) simulations, enabled tracking the temperatu… ▽ More The local atomic structure and lattice dynamics of two isostructural layered transition metal dichalcogenides (TMDs), 1T-TiSe$_2$ and 1T-VSe$_2$, were studied using temperature-dependent X-ray absorption spectroscopy at the Ti, V, and Se K-edges. Analysis of the extended X-ray absorption fine structure (EXAFS) spectra, employing reverse Monte Carlo (RMC) simulations, enabled tracking the temperature evolution of the local environment in the range of 10-300 K. The atomic coordinates derived from the final atomic configurations were used to calculate the partial radial distribution functions (RDFs) and the mean-square relative displacement (MSRD) factors for the first ten coordination shells around the absorbing atoms. Characteristic Einstein frequencies and effective force constants were determined for Ti-Se, Ti-Ti, V-Se, V-V, and Se-Se atom pairs from the temperature dependencies of MSRDs. The obtained results reveal differences in the temperature evolution of lattice dynamics and the strengths of intralayer and interlayer interactions in TiSe$_2$ and VSe$_2$. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Unraveling the interlayer and intralayer coupling in two-dimensional layered MoS$_2$ by X-ray absorption spectroscopy and ab initio molecular dynamics simulations

Authors: Inga Pudza, Dmitry Bocharov, Andris Anspoks, Matthias Krack, Aleksandr Kalinko, Edmund Welter, Alexei Kuzmin

Abstract: Understanding interlayer and intralayer coupling in two-dimensional layered materials (2DLMs) has fundamental and technological importance for their large-scale production, engineering heterostructures, and development of flexible and transparent electronics. At the same time, the quantification of weak interlayer interactions in 2DMLs is a challenging task, especially, from the experimental point… ▽ More Understanding interlayer and intralayer coupling in two-dimensional layered materials (2DLMs) has fundamental and technological importance for their large-scale production, engineering heterostructures, and development of flexible and transparent electronics. At the same time, the quantification of weak interlayer interactions in 2DMLs is a challenging task, especially, from the experimental point of view. Herein, we demonstrate that the use of X-ray absorption spectroscopy in combination with reverse Monte Carlo (RMC) and ab initio molecular dynamics (AIMD) simulations can provide useful information on both interlayer and intralayer coupling in 2DLM 2H$_c$-MoS$_2$. The analysis of the low-temperature (10-300 K) Mo K-edge extended X-ray absorption fine structure (EXAFS) using RMC simulations allows for obtaining information on the means-squared relative displacements $σ^2$ for nearest and distant Mo-S and Mo-Mo atom pairs. This information allowed us further to determine the strength of the interlayer and intralayer interactions in terms of the characteristic Einstein frequencies $ω_E$ and the effective force constants $κ$ for the nearest ten coordination shells around molybdenum. The studied temperature range was extended up to 1200 K employing AIMD simulations which were validated at 300 K using the EXAFS data. Both RMC and AIMD results provide evidence of the reduction of correlation in thermal motion between distant atoms and suggest strong anisotropy of atom thermal vibrations within the plane of the layers and in the orthogonal direction. △ Less

Submitted 2 June, 2023; originally announced June 2023.

Journal ref: Mater. Today Commun. 35 (2023) 106359

Nanocrystalline CaWO$_4$ and ZnWO$_4$ Tungstates for Hybrid Organic-Inorganic X-ray Detectors

Authors: Inga Pudza, Kaspars Pudzs, Andrejs Tokmakovs, Normunds Ralfs Strautnieks, Aleksandr Kalinko, Alexei Kuzmin

Abstract: Hybrid materials combining an organic matrix and high-Z nanomaterials show potential for applications in radiation detection, allowing unprecedented device architectures and functionality. Herein, novel hybrid organic-inorganic systems were produced using a mixture of tungstate (CaWO$_4$ or ZnWO$_4$) nanoparticles with a P3HT:PCBM blend. The nano-tungstates with a crystallite size of 43 nm for CaW… ▽ More Hybrid materials combining an organic matrix and high-Z nanomaterials show potential for applications in radiation detection, allowing unprecedented device architectures and functionality. Herein, novel hybrid organic-inorganic systems were produced using a mixture of tungstate (CaWO$_4$ or ZnWO$_4$) nanoparticles with a P3HT:PCBM blend. The nano-tungstates with a crystallite size of 43 nm for CaWO$_4$ and 30 nm for ZnWO$_4$ were synthesized by the hydrothermal method. Their structure and morphology were characterized by X-ray diffraction and scanning electron microscopy. The hybrid systems were used to fabricate direct conversion X-ray detectors able to operate with zero bias voltage. The detector performance was tested in a wide energy range using monochromatic synchrotron radiation. The addition of nanoparticles with high-Z elements improved the detector response to X-ray radiation compared with that of a pure organic P3HT:PCBM bulk heterojunction cell. The high dynamic range of our detector allows for recording X-ray absorption spectra, including the fine X-ray absorption structure located beyond the absorption edge. The obtained results suggest that nanocrystalline tungstates are promising candidates for application in direct organic-inorganic X-ray detectors. △ Less

Submitted 10 February, 2023; originally announced February 2023.

Journal ref: Materials 16 (2023) 667

Peculiarities of the local structure in new medium- and high-entropy, low-symmetry tungstates

Authors: Georgijs Bakradze, Edmund Welter, Alexei Kuzmin

Abstract: New monoclinic ($P2$/$c$) tungstates - a medium-entropy tungstate, (Mn,Ni,Cu,Zn)WO$_4$, and a high-entropy tungstate, (Mn,Co,Ni,Cu,Zn)WO$_4$ - were synthesized and characterized. Their phase purity and solid solution nature were confirmed by powder X-ray diffraction and Raman spectroscopy. X-ray absorption spectroscopy was used to probe the local structure around metal cations. The atomic structur… ▽ More New monoclinic ($P2$/$c$) tungstates - a medium-entropy tungstate, (Mn,Ni,Cu,Zn)WO$_4$, and a high-entropy tungstate, (Mn,Co,Ni,Cu,Zn)WO$_4$ - were synthesized and characterized. Their phase purity and solid solution nature were confirmed by powder X-ray diffraction and Raman spectroscopy. X-ray absorption spectroscopy was used to probe the local structure around metal cations. The atomic structures based on the ideal solid solution model were optimized by a simultaneous analysis of the extended X-ray absorption fine structure spectra at multiple metal absorption edges - five for (Mn,Ni,Cu,Zn)WO$_4$ and six for (Mn,Co,Ni,Cu,Zn)WO$_4$ - by means of reverse Monte Carlo simulations. In both compounds, Ni$^{2+}$ ions have the strongest tendency to organize their local environment and form slightly distorted [NiO$_6$] octahedra, whereas Mn$^{2+}$, Co$^{2+}$, and Zn$^{2+}$ ions have a strongly distorted octahedral coordination. The most intriguing result is that the shape of [CuO$_6$] octahedra in (Mn,Ni,Cu,Zn)WO$_4$ and (Mn,Co,Ni,Cu,Zn)WO$_4$ differs from that found in pure CuWO$_4$, where a strong Jahn-Teller distortion is present: [CuO$_6$] octahedra become more regular with increasing degree of dilution. △ Less

Submitted 29 October, 2022; originally announced October 2022.

Journal ref: Journal of Physics and Chemistry of Solids 172 (2023) 111052

Microwave-assisted synthesis and characterization of undoped and manganese doped zinc sulfide nanoparticles

Authors: Alexei Kuzmin, Milena Dile, Katrina Laganovska, Aleksejs Zolotarjovs

Abstract: Undoped and Mn-doped ZnS nanocrystals were produced by the microwave-assisted solvothermal method and characterized by X-ray diffraction, photoluminescence spectroscopy and scanning electron microscopy with energy-dispersive X-ray spectroscopy. All samples have the cubic zinc blende structure with the lattice parameter in the range of $a$ = 5.406-5.411 Å, and the average size of crystallites is in… ▽ More Undoped and Mn-doped ZnS nanocrystals were produced by the microwave-assisted solvothermal method and characterized by X-ray diffraction, photoluminescence spectroscopy and scanning electron microscopy with energy-dispersive X-ray spectroscopy. All samples have the cubic zinc blende structure with the lattice parameter in the range of $a$ = 5.406-5.411 Å, and the average size of crystallites is in the range of 6-9 nm. These nanoparticles agglomerate and form large grains with an average size of up to 180 nm. The photoluminescence of the undoped ZnS sample shows a broad emission band located at 530 nm, attributed to the defects at the surface of nanoparticles. In all Mn-doped samples, the emission peak at 598 nm was observed assigned to the characteristic forbidden transition between excited ($^4$T$_1$) and ground ($^6$A$_1$) levels of Mn$^{2+}$. Synchrotron radiation X-ray absorption spectroscopy at the Zn and Mn K-edges combined with reverse Monte Carlo (RMC) simulations based on the evolutionary algorithm confirms that manganese ions substitute zinc ions. However, the difference in the ion sizes ($R$(Mn$^{2+}$(IV)) = 0.66 Å and $R$(Zn$^{2+}$(IV)) = 0.60 Å) is responsible for the larger interatomic distances Mn-S (2.40(2) Å) compared to Zn-S (2.33(2) Å). The static structural relaxations in ZnS:Mn nanoparticles are responsible for the large values of the mean-square displacements factors for Zn, S and Mn atoms obtained by RMC simulations. △ Less

Submitted 4 August, 2022; originally announced August 2022.

Journal ref: Mater. Chem. Phys. 290 (2022) 126583

Inner relaxations in equiatomic single-phase high-entropy cantor alloy

Authors: Alevtina Smekhova, Alexei Kuzmin, Konrad Siemensmeyer, Radu Abrudan, Uwe Reinholz, Ana Guilherme Buzanich, Mike Schneider, Guillaume Laplanche, Kirill V. Yusenko

Abstract: The superior properties of high-entropy multi-functional materials are strongly connected with their atomic heterogeneity through many different local atomic interactions. The detailed element-specific studies on a local scale can provide insight into the primary arrangements of atoms in multicomponent systems and benefit to unravel the role of individual components in certain macroscopic properti… ▽ More The superior properties of high-entropy multi-functional materials are strongly connected with their atomic heterogeneity through many different local atomic interactions. The detailed element-specific studies on a local scale can provide insight into the primary arrangements of atoms in multicomponent systems and benefit to unravel the role of individual components in certain macroscopic properties of complex compounds. Herein, multi-edge X-ray absorption spectroscopy combined with reverse Monte Carlo simulations was used to explore a homogeneity of the local crystallographic ordering and specific structure relaxations of each constituent in the equiatomic single-phase face-centered cubic CrMnFeCoNi high-entropy alloy at room temperature. Within the considered fitting approach, all five elements of the alloy were found to be distributed at the nodes of the fcc lattice without any signatures of the additional phases at the atomic scale and exhibit very close statistically averaged interatomic distances (2.54-2.55 Å) with their nearest-neighbors. Enlarged structural displacements were found solely for Cr atoms. The macroscopic magnetic properties probed by conventional magnetometry demonstrate no opening of the hysteresis loops at 5 K and illustrate a complex character of the long-range magnetic order after field-assisted cooling in $\pm$5 T. The observed magnetic behavior is assigned to effects related to structural relaxations of Cr. Besides, the advantages and limitations of the reverse Monte Carlo approach to studies of multicomponent systems like high-entropy alloys are highlighted. △ Less

Submitted 28 July, 2022; originally announced July 2022.

Journal ref: Journal of Alloys and Compounds 920 (2022) 165999

Tailoring of rhenium oxidation state in ReOx thin films during reactive HiPIMS deposition process and following annealing

Authors: M. Zubkins, A. Sarakovskis, E. Strods, L. Bikse, B. Polyakov, A. Kuzmin, V. Vibornijs, J. Purans

Abstract: Bulk rhenium trioxide (ReO3) has an unusually high electrical conductivity and, being nanosized, has promising catalytic properties. However, the production of pure ReO3 thin films is challenging due to the difficulty to stabilize rhenium in a 6+ oxidation state. Here we present a novel approach for the deposition of ReOx (x = 1.6-2.9) thin films using reactive high power impulse magnetron sputter… ▽ More Bulk rhenium trioxide (ReO3) has an unusually high electrical conductivity and, being nanosized, has promising catalytic properties. However, the production of pure ReO3 thin films is challenging due to the difficulty to stabilize rhenium in a 6+ oxidation state. Here we present a novel approach for the deposition of ReOx (x = 1.6-2.9) thin films using reactive high power impulse magnetron sputtering (r-HiPIMS) from a metallic rhenium target in a mixed Ar/O2 atmosphere. The thin films were deposited in the gas-sustained self-sputtering regime, observed during r-HiPIMS process according to current waveforms. The influence of the substrate temperature, the oxygen-to-argon flow ratio and post-annealing at 250 °C in the air for 3 h on the properties of the films were studied. The as-deposited films have an X-ray amorphous structure (a-ReOx) when deposited at room temperature while a nano-crystalline \b{eta}-ReO2 phase when deposited at elevated temperatures (150 or 250 °C). The amorphous a-ReOx can be converted into the crystalline ReO3 with a lattice parameter of 3.75 Å upon annealing in the air. The surface morphology of the films is dense without detectable voids when elevated substrate temperatures are used. Various Re oxidation states are observed on the surface of the films in different ratios depending on the deposition parameters. All samples exhibit electrical resistivity on the order of 10-3 Ohmxcm and optical properties typical for thin metallic films. △ Less

Submitted 29 June, 2022; originally announced June 2022.

Comments: 38 pages, 12 figures

Journal ref: Materials Chemistry and Physics 289 (2022) 126399

The role of Al2O3 interlayer in the synthesis of ZnS/Al2O3/MoS2 core-shell nanowires

Authors: Edgars Butanovs, Alexei Kuzmin, Aleksejs Zolotarjovs, Sergei Vlassov, Boris Polyakov

Abstract: During the synthesis of heterostructured nanomaterials, unwanted structural and morphological changes in nanostructures may occur, especially when multiple sequential growth steps are involved. In this study, we describe a synthesis strategy of heterostructured ZnS/Al2O3/MoS2 core-shell nanowires (NWs), and explore the role of the Al2O3 interlayer during synthesis. Core-shell NWs were produced via… ▽ More During the synthesis of heterostructured nanomaterials, unwanted structural and morphological changes in nanostructures may occur, especially when multiple sequential growth steps are involved. In this study, we describe a synthesis strategy of heterostructured ZnS/Al2O3/MoS2 core-shell nanowires (NWs), and explore the role of the Al2O3 interlayer during synthesis. Core-shell NWs were produced via a four-step route: 1) synthesis of ZnO NWs on a silicon wafer, 2) deposition of thin Al2O3 layer by ALD, 3) magnetron deposition of MoO3 layer, and 4) annealing of the sample in the sulphur atmosphere. During sulphurization, ZnO is converted into ZnS, and MoO3 into MoS2, while the Al2O3 interlayer preserves the smooth surface of an NW required for the growth of a continuous MoS2 shell. The resulting ZnS/Al2O3/MoS2 core-shell NWs were characterized by transmission electron microscopy, X-ray diffraction and photoelectron spectroscopy, Raman spectroscopy, and optical photoluminescence spectroscopy. A reported strategy can be used for the synthesis of other core-shell NWs with a transition metal dichalcogenides (TMDs) shell to protect the NW core material that may otherwise be altered or damaged by the reactive chalcogenides at high temperatures. △ Less

Submitted 30 May, 2022; originally announced May 2022.

Revealing the local structure of CuMo$_{1-x}$W$_x$O$_4$ solid solutions by multi-edge X-ray absorption spectroscopy

Authors: Inga Pudza, Andris Anspoks, Giuliana Aquilanti, Alexei Kuzmin

Abstract: The effect of tungsten substitution with molybdenum on the structure of CuMo$_{1-x}$W$_x$O$_4$ ($x$ = 0.20, 0.30, 0.50, 0.75) solid solutions was studied by multi-edge X-ray absorption spectroscopy. The simultaneous analysis of EXAFS spectra measured at several (Cu K-edge, Mo K-edge and W L$_3$-edge) absorption edges was performed by the reverse Monte Carlo method taking into account multiple-scat… ▽ More The effect of tungsten substitution with molybdenum on the structure of CuMo$_{1-x}$W$_x$O$_4$ ($x$ = 0.20, 0.30, 0.50, 0.75) solid solutions was studied by multi-edge X-ray absorption spectroscopy. The simultaneous analysis of EXAFS spectra measured at several (Cu K-edge, Mo K-edge and W L$_3$-edge) absorption edges was performed by the reverse Monte Carlo method taking into account multiple-scattering effects. The degree of distortion of the coordination shells and its dependence on the composition were estimated from partial radial distribution functions (RDFs) $g(r)$ and bond angle distribution functions (BADFs) $f(\varphi)$. The analysis of partial RDFs suggests that the structure of solid solutions is mainly determined by the tungsten-related sublattice, while molybdenum atoms adapt to a locally distorted environment. As a result, the coordination of both tungsten and molybdenum atoms remains octahedral as in CuWO$_4$ for all the studied compositions. △ Less

Submitted 27 May, 2022; originally announced May 2022.

Journal ref: Mater. Res. Bull. 153 (2022) 111910

Resonant phonon-magnon interactions in free-standing metal-ferromagnet multilayer structures

Authors: Urban Vernik, Alexey M. Lomonosov, Vladimir S. Vlasov, Leonid N. Kotov, Dmitry A. Kuzmin, Igor V. Bychkov, Paolo Vavassori, Vasily V. Temnov

Abstract: We analyze resonant magneto-elastic interactions between standing perpendicular spin wave modes (exchange magnons) and longitudinal acoustic phonon modes in free-standing hybrid metal-ferromagnet bilayer and trilayer structures. Whereas the ferromagnetic layer acts as a magnetic cavity, all metal layers control the frequencies and eigenmodes of acoustic vibrations. The here proposed design allows… ▽ More We analyze resonant magneto-elastic interactions between standing perpendicular spin wave modes (exchange magnons) and longitudinal acoustic phonon modes in free-standing hybrid metal-ferromagnet bilayer and trilayer structures. Whereas the ferromagnetic layer acts as a magnetic cavity, all metal layers control the frequencies and eigenmodes of acoustic vibrations. The here proposed design allows for achieving and tuning the spectral and spatial modes overlap between phonons and magnons that results in their strong resonant interaction. Realistic simulations for gold-nickel multilayers show that sweeping the external magnetic field should allow for observing resonantly enhanced interactions between individual magnon and phonon modes in a broad range of frequencies spanning from tens of GHz up to several hundreds of GHz, which can be finely tuned through the multilayer design. Our results would enable the systematic study and the deep understanding of resonantly enhanced magneto-elastic coupling between individual phonon and magnon modes up to frequencies of great contemporary fundamental and applied interest. △ Less

Submitted 19 May, 2022; originally announced May 2022.

Comments: 9 pages, 6 figures

Journal ref: Phys. Rev B 106, 144420 (2022)

In situ study of zinc peroxide decomposition to zinc oxide by X-ray absorption spectroscopy and reverse Monte-Carlo simulations

Authors: Alexei Kuzmin, Inga Pudza, Konstantin Klementiev

Abstract: The Zn K-edge X-ray absorption spectroscopy has been used to investigate in situ the decomposition of zinc peroxide (ZnO$_2$) to zinc oxide (ZnO). Principal component and linear combination analyses of the EXAFS spectra have been employed to identify the phase composition of the oxide upon heating to 900$^\circ$C. Only the ZnO$_2$ phase has been found up to 180$^\circ$C, whereas only the nanocryst… ▽ More The Zn K-edge X-ray absorption spectroscopy has been used to investigate in situ the decomposition of zinc peroxide (ZnO$_2$) to zinc oxide (ZnO). Principal component and linear combination analyses of the EXAFS spectra have been employed to identify the phase composition of the oxide upon heating to 900$^\circ$C. Only the ZnO$_2$ phase has been found up to 180$^\circ$C, whereas only the nanocrystalline ZnO phase has occurred above 250$^\circ$C. Detailed structural information on the temperature dependence of the local environment of zinc atoms has been obtained using the reverse Monte Carlo simulations. A strong increase of disorder has been found upon approaching the decomposition temperature, evidenced by the broadening of Zn-O and Zn-Zn pair distribution functions and related mean-square relative displacements. △ Less

Submitted 28 March, 2022; v1 submitted 14 March, 2022; originally announced March 2022.

Journal ref: Physica Status Solidi (b) 259 (2022) 2200001

Chemical-state analyses of Ni, Zn, and W ions in NiWO$_4$-ZnWO$_4$ solid solutions by X-ray photoelectron spectroscopy

Authors: G. Bakradze, A. Kalinko, A. Kuzmin

Abstract: The chemical states of Ni, Zn, and W in microcrystalline NiWO$_4$-ZnWO$_4$ solid solutions were studied by X-ray photoelectron spectroscopy. The recorded spectra of the Ni 2p, Zn 2p, and W 4f photoelectron lines and Ni L$_2$M$_{23}$M$_{45}$, Zn L$_3$M$_{45}$M$_{45}$, and W N$_4$N$_{67}$N$_{7}$ Auger-transition lines show pronounced changes with increasing Zn concentration. The positions of the res… ▽ More The chemical states of Ni, Zn, and W in microcrystalline NiWO$_4$-ZnWO$_4$ solid solutions were studied by X-ray photoelectron spectroscopy. The recorded spectra of the Ni 2p, Zn 2p, and W 4f photoelectron lines and Ni L$_2$M$_{23}$M$_{45}$, Zn L$_3$M$_{45}$M$_{45}$, and W N$_4$N$_{67}$N$_{7}$ Auger-transition lines show pronounced changes with increasing Zn concentration. The positions of the resolved photoelectron and Auger-transition lines were combined to construct so-called chemical-state plots (Wagner or Auger-parameter plots) for metal ions in solid solutions. With increasing Zn concentration, the Auger parameter increases for Ni and decreases for W, thus evidencing a lowering and an increase of the electronic polarizability around core-ionized Ni and W ions, respectively. At the same time, the character of Zn-O bonds and the local structure around Zn ions do not change. It is concluded that the dilution of NiWO$_4$ with Zn ions is accompanied by an increase of the Ni-O bond ionicity and an increase of the W-O bond covalency. These changes are attributed to the charge redistribution among [NiO$_6$] and [WO$_6$] structural units. We show that a careful in-depth analysis of XPS data obtained with a laboratory-based X-ray photoelectron spectroscopy system can give chemically sensitive, qualitative information on the changes in the first coordination spheres of each metal ion. This information is otherwise accessible only by synchrotron-based techniques (such as X-ray absorption spectroscopy). △ Less

Submitted 7 November, 2021; originally announced November 2021.

Journal ref: J. Phys. Chem. Solids 161 (2022) 110425

EDA: EXAFS Data Analysis software package

Authors: Alexei Kuzmin

Abstract: The EXAFS data analysis software package EDA consists of a suite of programs running under Windows operating system environment and designed to perform all steps of conventional EXAFS data analysis such as the extraction of the XANES/EXAFS parts of the x-ray absorption coefficient, the Fourier filtering, the EXAFS fitting using the Gaussian and cumulant models. Besides, the package includes two ad… ▽ More The EXAFS data analysis software package EDA consists of a suite of programs running under Windows operating system environment and designed to perform all steps of conventional EXAFS data analysis such as the extraction of the XANES/EXAFS parts of the x-ray absorption coefficient, the Fourier filtering, the EXAFS fitting using the Gaussian and cumulant models. Besides, the package includes two advanced approaches, which allow one to reconstruct the radial distribution function (RDF) from EXAFS based on the regularization-like method and to calculate configurationalaveraged EXAFS using a set of atomic configurations obtained from molecular dynamics or Monte Carlo simulations. △ Less

Submitted 12 August, 2021; originally announced August 2021.

Journal ref: International Tables for Crystallography, Vol. I (2021)

Validation of moment tensor potentials for fcc and bcc metals using EXAFS spectra

Authors: Alexander V. Shapeev, Dmitry Bocharov, Alexei Kuzmin

Abstract: Machine-learning potentials for materials, namely the moment tensor potentials (MTPs), were validated using experimental EXAFS spectra for the first time. The MTPs for four metals (bcc W and Mo, fcc Cu and Ni) were obtained by the active learning algorithm of fitting to the results of the calculations using density functional theory (DFT). The MTP accuracy was assessed by comparing metal K-edge EX… ▽ More Machine-learning potentials for materials, namely the moment tensor potentials (MTPs), were validated using experimental EXAFS spectra for the first time. The MTPs for four metals (bcc W and Mo, fcc Cu and Ni) were obtained by the active learning algorithm of fitting to the results of the calculations using density functional theory (DFT). The MTP accuracy was assessed by comparing metal K-edge EXAFS spectra obtained experimentally and computed from the results of molecular dynamics (MD) simulations. The sensitivity of the method to various aspects of the MD and DFT models was demonstrated using Ni as an example. Good agreement was found for W, Mo and Cu using the recommended PAW pseudopotentials, whereas a more accurate pseudopotential with 18 valence electrons was required for Ni to achieve a similar agreement. The use of EXAFS spectra allows one to estimate the MTP ability in reproducing both average and dynamic atomic structures. △ Less

Submitted 11 August, 2021; originally announced August 2021.

Journal ref: Computational Materials Science 210 (2022) 111028

Evidence of nickel ions dimerization in NiWO$_4$ and NiWO$_4$-ZnWO$_4$ solid solutions probed by EXAFS spectroscopy and reverse Monte Carlo simulations

Authors: G. Bakradze, A. Kalinko, A. Kuzmin

Abstract: The existence of exchange-coupled Ni$^{2+}$ ions -- the so-called magnetic dimers -- in wolframite-type NiWO$_4$ and Zn$_c$Ni$_{1-c}$WO$_4$ solid solutions with high nickel content was discovered by X-ray absorption spectroscopy combined with reverse Monte Carlo (RMC) simulations. Temperature- (10--300 K) and composition-dependent x-ray absorption spectra were measured at the Ni K-edge, Zn K-edge,… ▽ More The existence of exchange-coupled Ni$^{2+}$ ions -- the so-called magnetic dimers -- in wolframite-type NiWO$_4$ and Zn$_c$Ni$_{1-c}$WO$_4$ solid solutions with high nickel content was discovered by X-ray absorption spectroscopy combined with reverse Monte Carlo (RMC) simulations. Temperature- (10--300 K) and composition-dependent x-ray absorption spectra were measured at the Ni K-edge, Zn K-edge, and W L$_3$-edge of microcrystalline NiWO$_4$, Zn$_c$Ni$_{1-c}$WO$_4$ and ZnWO$_4$. Structural models were obtained from simultaneous analysis of the extended x-ray absorption fine structure (EXAFS) spectra at three metal absorption edges using RMC simulations. The obtained radial distribution functions for different atomic pairs made it possible to trace in detail the changes in the local environment of metal ions and the effect of thermal disorder. Dimerization of Ni$^{2+}$ ions within quasi-one-dimensional zigzag chains of [NiO$_6$] octahedra was evidenced in NiWO$_4$ in the whole studied temperature range. It manifests itself as the splitting of the Ni-Ni radial distribution function into two separate peaks. The effect is further preserved in solid solutions Zn$_c$Ni$_{1-c}$WO$_4$ for $c \leq 0.6$, which is related to the probability to find two Ni$^{2+}$ ions in neighboring positions. △ Less

Submitted 16 July, 2021; originally announced July 2021.

Journal ref: Acta Materialia 217 (2021) 117171

The influence of Zn$^{2+}$ ions on the local structure and thermochromic properties of Cu$_{1-x}$Zn$_x$MoO$_4$ solid solutions

Authors: Inga Pudza, Andris Anspoks, Arturs Cintins, Aleksandr Kalinko, Edmund Welter, Alexei Kuzmin

Abstract: The influence of zinc ions on the thermochromic properties of polycrystalline Cu$_{1-x}$Zn$_x$MoO$_4$ ($x$=0.10, 0.50, 0.90) solid solutions was studied by X-ray absorption spectroscopy at the Cu, Zn and Mo K-edges. Detailed structural information on the local environment of metal ions was obtained from the simultaneous analysis of EXAFS spectra measured at three metal absorption edges using the r… ▽ More The influence of zinc ions on the thermochromic properties of polycrystalline Cu$_{1-x}$Zn$_x$MoO$_4$ ($x$=0.10, 0.50, 0.90) solid solutions was studied by X-ray absorption spectroscopy at the Cu, Zn and Mo K-edges. Detailed structural information on the local environment of metal ions was obtained from the simultaneous analysis of EXAFS spectra measured at three metal absorption edges using the reverse Monte Carlo method. Thermochromic phase transition with the hysteretic behaviour between $α$ and $γ$ phases was observed in Cu$_{0.90}$Zn$_{0.10}$MoO$_4$ solid solution. It was found that the local environment of molybdenum ions is most susceptible to the substitution of copper for zinc and, upon cooling, transforms from tetrahedral MoO$_4$ to distorted octahedral MoO$_6$. △ Less

Submitted 5 July, 2021; originally announced July 2021.

Journal ref: Materials Today Communications 28 (2021) 102607

Study of the thermochromic phase transition in CuMo$_{1-x}$W$_x$O$_4$ solid solutions at the W L$_3$-edge by resonant X-ray emission spectroscopy

Authors: I. Pudza, A. Kalinko, A. Cintins, A. Kuzmin

Abstract: Polycrystalline CuMo$_{1-x}$W$_x$O$_4$ solid solutions were studied by resonant X-ray emission spectroscopy (RXES) at the W L$_3$-edge to follow a variation of the tungsten local atomic and electronic structures across thermochromic phase transition as a function of sample composition and temperature. The experimental results were interpreted using ab initio calculations. The crystal-field splitti… ▽ More Polycrystalline CuMo$_{1-x}$W$_x$O$_4$ solid solutions were studied by resonant X-ray emission spectroscopy (RXES) at the W L$_3$-edge to follow a variation of the tungsten local atomic and electronic structures across thermochromic phase transition as a function of sample composition and temperature. The experimental results were interpreted using ab initio calculations. The crystal-field splitting parameter for the 5d(W)-states was obtained from the analysis of the RXES plane and was used to evaluate the coordination of tungsten atoms. Temperature-dependent RXES measurements were successfully employed to determine the hysteretic behaviour of the structural phase transition between the $α$ and $γ$ phases in CuMo$_{1-x}$W$_x$O$_4$ solid solutions on cooling and heating, even at low ($x$<0.10) tungsten content. It was found that tungsten ions have octahedral coordination for in the whole studied temperature range (90-420 K), whereas their coordination changes from tetrahedral to octahedral upon cooling for smaller ($x$ <= 0.15) tungsten content. Nevertheless, some amount of tungsten ions was found to co-exists in the octahedral environment at room temperature for $x$<0.15. The obtained results correlate well with the color change in these solid solutions. △ Less

Submitted 30 December, 2020; originally announced December 2020.

Journal ref: Acta Materialia 205 (2021) 116581

Topological analysis of chemical bonding in the layered FePSe3 upon pressure-induced phase transitions

Authors: Robert A. Evarestov, Alexei Kuzmin

Abstract: Two pressure-induced phase transitions have been theoretically studied in the layered iron phosphorus triselenide (FePSe3). Topological analysis of chemical bonding in FePSe3 has been performed based on the results of first-principles calculations within the periodic linear combination of atomic orbitals (LCAO) method with hybrid Hartree-Fock-DFT B3LYP functional. The first transition at about 6 G… ▽ More Two pressure-induced phase transitions have been theoretically studied in the layered iron phosphorus triselenide (FePSe3). Topological analysis of chemical bonding in FePSe3 has been performed based on the results of first-principles calculations within the periodic linear combination of atomic orbitals (LCAO) method with hybrid Hartree-Fock-DFT B3LYP functional. The first transition at about 6 GPa is accompanied by the symmetry change from R-3 to C2/m, whereas the semiconductor-to-metal transition (SMT) occurs at about 13 GPa leading to the symmetry change from C2/m to P-31m. We found that the collapse of the band gap at about 13 GPa occurs due to changes in the electronic structure of FePSe3 induced by relative displacements of phosphorus or selenium atoms along the c-axis direction under pressure. The results of the topological analysis of the electron density and its Laplacian demonstrate that the pressure changes not only the interatomic distances but also the bond nature between the intralayer and interlayer phosphorus atoms. The interlayer P-P interactions are absent in two non-metallic FePSe3 phases while after SMT the intralayer P-P interactions weaken and the interlayer P-P interactions appear. △ Less

Submitted 3 November, 2020; originally announced November 2020.

Comments: arXiv admin note: text overlap with arXiv:2002.10419

Journal ref: J. Comput. Chem. 41 (2020) 2610-2623

First-principles LCAO study of the low and room temperature phases of CdPS$_3$

Authors: A. Kuzmin

Abstract: The electronic and atomic structure of a bulk 2D layered van-der-Waals compound CdPS3 was studied in the low (R3) and room (C2/m) temperature phases using first-principles calculations within the periodic linear combination of atomic orbitals method with hybrid meta exchange-correlation M06 functional. The calculation results reproduce well the experimental crystallographic parameters. The value o… ▽ More The electronic and atomic structure of a bulk 2D layered van-der-Waals compound CdPS3 was studied in the low (R3) and room (C2/m) temperature phases using first-principles calculations within the periodic linear combination of atomic orbitals method with hybrid meta exchange-correlation M06 functional. The calculation results reproduce well the experimental crystallographic parameters. The value of the indirect band gap Eg=3.4 eV for the room-temperature monoclinic C2/m phase is close to the experimental one, while the indirect band gap Eg=3.3 eV was predicted for the low-temperature trigonal R3 phase. The effect of hydrostatic pressure on the band gap in both phases was studied in the pressure range from 0 to 40 GPa. In both cases, the pressure dependence of the band gap passes through a maximum, but at different pressures. In the R3 phase, the band gap reaches its maximum value of ~4 eV at ~30 GPa, whereas in the C2/m phase, the maximum value of ~3.6 eV is reached already at ~8 GPa. △ Less

Submitted 21 October, 2020; originally announced October 2020.

Journal ref: Low Temperature Physics 46, 1217 (2020)

X-ray absorption and Raman spectroscopy studies of tungstates solid solutions ZncNi1-cWO4 (c=0.0-1.0)

Authors: G. Bakradze, A. Kalinko, A. Kuzmin

Abstract: The influence of thermal disorder and static distortions on the local structure in microcrystalline solid solutions of tungstates ZncNi1-cWO4 with c=0.0-1.0 was investigated using temperature-dependent (10-300 K) x-ray absorption spectroscopy (XAS) at the W L3-edge. In addition, the vibrational properties of the solid solutions were studied by Raman spectroscopy. Our results indicate that the form… ▽ More The influence of thermal disorder and static distortions on the local structure in microcrystalline solid solutions of tungstates ZncNi1-cWO4 with c=0.0-1.0 was investigated using temperature-dependent (10-300 K) x-ray absorption spectroscopy (XAS) at the W L3-edge. In addition, the vibrational properties of the solid solutions were studied by Raman spectroscopy. Our results indicate that the formation of solid solutions is accompanied by strong structural relaxations leading to the changes in the [WO6] octahedra distortions, which, in turn, affect the vibrational properties of tungstates. In particular, the frequency and band width of the highest W-O stretching mode at about 900 cm-1 show distinct composition dependence, following the local structure modifications as revealed by XAS. △ Less

Submitted 21 October, 2020; originally announced October 2020.

Journal ref: Low Temperature Physics 46, 1201 (2020)

Origin of pressure-induced insulator-to-metal transition in the van der Waals compound FePS3 from first-principles calculations

Authors: R. A. Evarestov, A. Kuzmin

Abstract: Pressure-induced insulator-to-metal transition (IMT) has been studied in the van der Waals compound iron thiophosphate (FePS3) using first-principles calculations within the periodic linear combination of atomic orbitals method with hybrid Hartree-Fock-DFT B3LYP functional. Our calculations reproduce correctly the IMT at ~15 GPa, which is accompanied by a reduction of the unit cell volume and of t… ▽ More Pressure-induced insulator-to-metal transition (IMT) has been studied in the van der Waals compound iron thiophosphate (FePS3) using first-principles calculations within the periodic linear combination of atomic orbitals method with hybrid Hartree-Fock-DFT B3LYP functional. Our calculations reproduce correctly the IMT at ~15 GPa, which is accompanied by a reduction of the unit cell volume and of the vdW gap. We found from the detailed analysis of the projected density of states that the 3p states of phosphorus atoms contribute significantly at the bottom of the conduction band. As a result, the collapse of the band gap occurs due to changes in the electronic structure of FePS3 induced by relative displacements of phosphorus or sulfur atoms along the c-axis direction under pressure. △ Less

Submitted 24 February, 2020; originally announced February 2020.

Journal ref: J. Comput. Chem. 41 (2020) 1337-1344

Ab initio molecular dynamics simulations of negative thermal expansion in ScF3: the effect of the supercell size

Authors: D. Bocharov, M. Krack, Yu. Rafalskij, A. Kuzmin, J. Purans

Abstract: Scandium fluoride (ScF3) belongs to a class of negative thermal expansion (NTE) materials. It shows a strong lattice contraction up to about 1000 K switching to expansion at higher temperatures. Here the NTE effect in ScF3 is studied in the temperature range from 300 K to 1600 K using ab initio molecular dynamics (AIMD) simulations in the isothermal-isobaric (NpT) ensemble. The temperature depende… ▽ More Scandium fluoride (ScF3) belongs to a class of negative thermal expansion (NTE) materials. It shows a strong lattice contraction up to about 1000 K switching to expansion at higher temperatures. Here the NTE effect in ScF3 is studied in the temperature range from 300 K to 1600 K using ab initio molecular dynamics (AIMD) simulations in the isothermal-isobaric (NpT) ensemble. The temperature dependence of the lattice constant, inter-atomic Sc-F-Sc bond angle distributions and the Sc-F and Sc-Sc radial distribution functions is obtained as a function of supercell size from 2a x 2a x 2a to 5a x 5a x 5a where a is the lattice parameter of ScF3. A comparison with the experimental Sc K-edge EXAFS data at 600 K is used to validate the accuracy of the AIMD simulations. Our results suggest that the AIMD calculations are able to reproduce qualitatively the NTE effect in ScF3, however a supercell size larger than 2a x 2a x 2a should be used to account accurately for dynamic disorder. The origin of the NTE in ScF3 is explained by the interplay between expansion and rotation of ScF6 octahedra. △ Less

Submitted 24 February, 2020; originally announced February 2020.

Journal ref: Comp. Mater. Sci. 171 (2020) 109198

Recent progress in high pressure X-ray absorption spectroscopy studies at the ODE beamline

Authors: L. Nataf, F. Baudelet, A. Polian, I. Jonane, A. Anspoks, A. Kuzmin, T. Irifune

Abstract: High pressure energy-dispersive X-ray absorption spectroscopy is a valuable structural technique, especially, when combined with a nano-polycrystalline diamond anvil cell. Here we present recent results obtained using the dispersive setup of the ODE beamline at SOLEIL synchrotron. The effect of pressure and temperature on the X-ray induced photoreduction is discussed on the example of nanocrystall… ▽ More High pressure energy-dispersive X-ray absorption spectroscopy is a valuable structural technique, especially, when combined with a nano-polycrystalline diamond anvil cell. Here we present recent results obtained using the dispersive setup of the ODE beamline at SOLEIL synchrotron. The effect of pressure and temperature on the X-ray induced photoreduction is discussed on the example of nanocrystalline CuO. The possibility to follow local environment changes during pressure-induced phase transitions is demonstrated for alpha-MoO3 based on the reverse Monte Carlo simulations. △ Less

Submitted 24 February, 2020; originally announced February 2020.

Journal ref: High Pressure Research 40 (2020) 82-87

Treatment of disorder effects in X-ray absorption spectra beyond the conventional approach

Authors: A. Kuzmin, J. Timoshenko, A. Kalinko, I. Jonane, A. Anspoks

Abstract: The contribution of static and thermal disorder is one of the largest challenges for the accurate determination of the atomic structure from the extended X-ray absorption fine structure (EXAFS). Although there are a number of generally accepted approaches to solve this problem, which are widely used in the EXAFS data analysis, they often provide less accurate results when applied to outer coordina… ▽ More The contribution of static and thermal disorder is one of the largest challenges for the accurate determination of the atomic structure from the extended X-ray absorption fine structure (EXAFS). Although there are a number of generally accepted approaches to solve this problem, which are widely used in the EXAFS data analysis, they often provide less accurate results when applied to outer coordination shells around the absorbing atom. In this case, the advanced techniques based on the molecular dynamics and reverse Monte Carlo simulations are known to be more appropriate: their strengths and weaknesses are reviewed here. △ Less

Submitted 24 February, 2020; originally announced February 2020.

Journal ref: Radiation Physics and Chemistry 175 (2020) 108112

Local thermal fluctuations in current-carrying superconducting nanowires

Authors: Alexej D. Semenov, Mariia Sidorova, Mikhail A. Skvortsov, Artem Kuzmin, Konstantin Ilin, Michael Siegel

Abstract: We analyze the effect of different types of fluctuations in internal electron energy on the rates of dark and photon counts in straight current-carrying superconducting nanowires. Dark counts appear due to thermal fluctuations in statistically independent cells with the effective size of the order of the coherence length; each count corresponds to an escape from the equilibrium state through an ap… ▽ More We analyze the effect of different types of fluctuations in internal electron energy on the rates of dark and photon counts in straight current-carrying superconducting nanowires. Dark counts appear due to thermal fluctuations in statistically independent cells with the effective size of the order of the coherence length; each count corresponds to an escape from the equilibrium state through an appropriate saddle point. For photon counts, spectral broadening of the deterministic cut off in the spectra of the detection efficiency can be phenomenologically explained by local thermal fluctuations in the electron energy within cells with the same effective volume as for dark counts. △ Less

Submitted 20 October, 2020; v1 submitted 11 October, 2019; originally announced October 2019.

Journal ref: Phys. Rev. B 102, 184508 (2020)

Nanowire single-photon detectors made of atomic layer-deposited niobium nitride

Authors: Emanuel Knehr, Artem Kuzmin, Mario Ziegler, Steffen Doerner, Konstantin Ilin, Michael Siegel, Ronny Stolz, Heidemarie Schmidt

Abstract: We demonstrate and characterize first superconducting nanowire single-photon detectors (SNSPDs) made from atomic layer-deposited (ALD) NbN layers. To assess the suitability of these films as a detector material, transport properties of bare films and bridges of different dimensions and thicknesses are investigated. Similar ratios of the measured critical current to the depairing current are obtain… ▽ More We demonstrate and characterize first superconducting nanowire single-photon detectors (SNSPDs) made from atomic layer-deposited (ALD) NbN layers. To assess the suitability of these films as a detector material, transport properties of bare films and bridges of different dimensions and thicknesses are investigated. Similar ratios of the measured critical current to the depairing current are obtained for micro-bridges made from ALD and sputtered NbN films. Furthermore, we characterized the single-photon response for 5 and 10 nm-thick nanowire detectors. A 100 nm-wide straight nanowire with a length of 5 $μ$m exhibits saturated count-rate dependencies on bias current and a cut-off wavelength in the near-infrared range. The ALD technique could open up the possibility to fabricate NbN-based detectors on the wafer scale and to conformally cover also non-planar surfaces for novel device concepts. △ Less

Submitted 12 June, 2019; originally announced June 2019.

Comments: 9 pages, 6 figures

Journal ref: Supercond. Sci. Technol. 32, 125007 (2019)

Surface plasmon-polaritons in deformed graphene excited by attenuated total internal reflection

Authors: Maksim O. Usik, Igor V. Bychkov, Vladimir G. Shavrov, Dmitry A. Kuzmin

Abstract: In the present work we theoretically investigated the excitation of surface plasmon-polaritons (SPPs) in deformed graphene by attenuated total reflection method. We considered the Otto geometry for SPPs excitation in graphene. Efficiency of SPPs excitation strongly depends on the SPPs propagation direction. The frequency and the incident angle of the most effective excitation of SPPs strongly depe… ▽ More In the present work we theoretically investigated the excitation of surface plasmon-polaritons (SPPs) in deformed graphene by attenuated total reflection method. We considered the Otto geometry for SPPs excitation in graphene. Efficiency of SPPs excitation strongly depends on the SPPs propagation direction. The frequency and the incident angle of the most effective excitation of SPPs strongly depend on the polarization of the incident light. Our results may open up the new possibilities for strain-induced molding flow of light at nanoscales. △ Less

Submitted 18 March, 2019; originally announced March 2019.

Comments: 11 pages, 4 figures, in print in Open Material Sciences

Advanced approach to the local structure reconstruction and theory validation on the example of the W L$_3$-edge extended X-ray absorption fine structure of tungsten

Authors: Inga Jonane, Andris Anspoks, Alexei Kuzmin

Abstract: Atomistic simulations of the experimental W L$_3$-edge extended X-ray absorption fine structure (EXAFS) of bcc tungsten at T = 300 K were performed using classical molecular dynamics (MD) and reverse Monte Carlo (RMC) methods. The MD-EXAFS method based on the results of MD simulations allowed us to access the structural information, encoded in EXAFS, beyond the first coordination shell and to vali… ▽ More Atomistic simulations of the experimental W L$_3$-edge extended X-ray absorption fine structure (EXAFS) of bcc tungsten at T = 300 K were performed using classical molecular dynamics (MD) and reverse Monte Carlo (RMC) methods. The MD-EXAFS method based on the results of MD simulations allowed us to access the structural information, encoded in EXAFS, beyond the first coordination shell and to validate the accuracy of two interaction potential models - the embedded atom model potential and the second nearest-neighbor modified embedded atom method potential. The RMC-EXAFS method was used for more elaborate analysis of the EXAFS data giving access to thermal disorder effects. The results of both methods suggest that the correlation in atomic motion in bcc tungsten becomes negligible above 8 Å. This fact allowed us to use the EXAFS data to determine not only mean-square relative displacements of atomic W-W pair motion but also mean-square displacements of individual tungsten atoms, which are usually accessible from diffraction data only. △ Less

Submitted 26 February, 2018; originally announced February 2018.

Comments: 12 pages, 5 figures

Journal ref: Modelling Simul. Mater. Sci. Eng. 26 (2018) 025004 (11 pp)

Plasmonics of magnetic and topological graphene-based nanostructures

Authors: Dmitry A. Kuzmin, Igor V. Bychkov, Vladimir G. Shavrov, Vasily V. Temnov

Abstract: Graphene is a unique material to study fundamental limits of plasmonics. Apart from the ultimate single-layer thickness, its carrier concentration can be tuned by chemical doping or applying an electric field. In this manner the electrodynamic properties of graphene can be varied from highly conductive to dielectric. Graphene supports strongly confined, propagating surface plasmon-polaritons (SPPs… ▽ More Graphene is a unique material to study fundamental limits of plasmonics. Apart from the ultimate single-layer thickness, its carrier concentration can be tuned by chemical doping or applying an electric field. In this manner the electrodynamic properties of graphene can be varied from highly conductive to dielectric. Graphene supports strongly confined, propagating surface plasmon-polaritons (SPPs) in a broad spectral range from terahertz to mid-infrared frequencies. It also possesses a strong magneto-optical response and thus provides complimentary architectures to conventional magneto-plasmonics based on magneto-optically active metals or dielectrics. Despite of a large number of review articles devoted to plasmonic properties and applications of graphene, little is known about graphene magneto-plasmonics and topological effects in graphene-based nanostructures, which represent the main subject of this review. We discuss several strategies to enhance plasmonic effects in topologically distinct closed surface landscapes, i.e. graphene nanotubes, cylindric nanocavities and toroidal nanostructures. A novel phenomenon of the strongly asymmetric SPP propagation on chiral meta-structures and fundamental relations between structural and plasmonic topological indices are reviewed. △ Less

Submitted 29 November, 2017; originally announced November 2017.

Compact microwave kinetic inductance nanowire galvanometer for cryogenic detectors at 4.2 K

Authors: S. Doerner, A. Kuzmin, K. Graf, S. Wuensch, I. Charaev, M. Siegel

Abstract: We present a compact current sensor based on a superconducting microwave lumped-element resonator with a nanowire kinetic inductor, operating at 4.2 K. The sensor is suitable for multiplexed readout in GHz range of large-format arrays of cryogenic detectors. The device consists of a lumped-element resonant circuit, fabricated from a single 4-nm-thick superconducting layer of niobium nitride. Thus,… ▽ More We present a compact current sensor based on a superconducting microwave lumped-element resonator with a nanowire kinetic inductor, operating at 4.2 K. The sensor is suitable for multiplexed readout in GHz range of large-format arrays of cryogenic detectors. The device consists of a lumped-element resonant circuit, fabricated from a single 4-nm-thick superconducting layer of niobium nitride. Thus, the fabrication and operation is significantly simplified in comparison to state-of-the-art approaches. Because the resonant circuit is inductively coupled to the feed line the current to be measured can directly be injected without having the need of an impedance matching circuit, reducing the system complexity. With the proof-of-concept device we measured a current noise floor δImin of 10 pA/Hz1/2 at 10 kHz. Furthermore, we demonstrate the ability of our sensor to amplify a pulsed response of a superconducting nanowire single-photon detector using a GHz-range carrier for effective frequency-division multiplexing. △ Less

Submitted 8 September, 2017; originally announced September 2017.

Physical mechanisms of timing jitter in photon detection by current carrying superconducting nanowires

Authors: Mariia Sidorova, Alexej Semenov, Heinz-Wilhelm Hubers, Ilya Charaev, Artem Kuzmin, Steffen Doerner, Michael Siegel

Abstract: We studied timing jitter in the appearance of photon counts in meandering nanowires with different fractional amount of bends. Timing jitter, which is the probability density of the random time delay between photon absorption in current-carrying superconducting nanowire and appearance of the normal domain, reveals two different underlying physical scenarios. In the deterministic regime, which is r… ▽ More We studied timing jitter in the appearance of photon counts in meandering nanowires with different fractional amount of bends. Timing jitter, which is the probability density of the random time delay between photon absorption in current-carrying superconducting nanowire and appearance of the normal domain, reveals two different underlying physical scenarios. In the deterministic regime, which is realized at large currents and photon energies, jitter is controlled by position dependent detection threshold in straight parts of meanders and decreases with the current. At small photon energies, jitter increases and its current dependence disappears. In this probabilistic regime jitter is controlled by Poisson process in that magnetic vortices jump randomly across the wire in areas adjacent to the bends. △ Less

Submitted 6 September, 2017; v1 submitted 18 July, 2017; originally announced July 2017.

Comments: 10 pages, 2 tables, 6 figures

Journal ref: Phys. Rev. B 96, 184504 (2017)

Frequency-Multiplexed bias and readout of a 16-pixel Superconducting Nanowire Single-Photon Detector Array

Authors: Steffen Doerner, Artem Kuzmin, Stefan Wuensch, Ilya Charaev, Florian Boes, Thomas Zwick, Michael Siegel

Abstract: We demonstrate a 16-pixel array of radio-frequency superconducting nanowire single-photon detectors with an integrated and scalable frequency-division multiplexing architecture, reducing the required bias and readout lines to a single microwave feed line. The electrical behavior of the photon-sensitive nanowires, embedded in a resonant circuit, as well as the optical performance and timing jitter… ▽ More We demonstrate a 16-pixel array of radio-frequency superconducting nanowire single-photon detectors with an integrated and scalable frequency-division multiplexing architecture, reducing the required bias and readout lines to a single microwave feed line. The electrical behavior of the photon-sensitive nanowires, embedded in a resonant circuit, as well as the optical performance and timing jitter of the single detectors is discussed. Besides the single pixel measurements we also demonstrate the operation of the 16-pixel array with a temporal, spatial and photon-number resolution. △ Less

Submitted 28 April, 2017; originally announced May 2017.

Topologically Induced Optical Activity in Graphene-Based Meta-Structures

Authors: Dmitry A. Kuzmin, Igor V. Bychkov, Vladimir G. Shavrov, Vasily V. Temnov

Abstract: Non-reciprocity and asymmetric transmission in optical and plasmonic systems is a key element for engineering the one-way propagation structures for light manipulation. Here we investigate topological nanostructures covered with graphene-based meta-surfaces, which consist of a periodic pattern of sub-wavelength stripes of graphene winding around the (meta-) tube or (meta-)torus. We establish the r… ▽ More Non-reciprocity and asymmetric transmission in optical and plasmonic systems is a key element for engineering the one-way propagation structures for light manipulation. Here we investigate topological nanostructures covered with graphene-based meta-surfaces, which consist of a periodic pattern of sub-wavelength stripes of graphene winding around the (meta-) tube or (meta-)torus. We establish the relation between the topological and plasmonic properties in these structures, as justified by simple theoretical expressions. Our results demonstrate how to use strong asymmetric and chiral plasmonic responses to tailor the electrodynamic properties in topological meta-structures. Cavity resonances formed by elliptical and hyperbolic plasmons in meta-structures are sensitive to the one-way propagation regime in a finite length (Fabry-Perot-like) meta-tube and display the giant mode splitting in a (Mach-Zehnder-like) meta-torus. △ Less

Submitted 14 June, 2017; v1 submitted 26 April, 2017; originally announced April 2017.

Comments: 20 pages, 5 figures + TOC figure, accepted by ACS Photonics

Operation of Multi-Pixel Radio-Frequency Superconducting Nanowire Single-Photon Detector Arrays

Authors: Steffen Doerner, Artem Kuzmin, Stefan Wuensch, Ilya Charaev, Michael Siegel

Abstract: The concept of the radio-frequency superconducting nanowire single-photon detector (RF-SNSPD) allows frequency-division multiplexing (FDM) of the bias and readout lines of several SNSPDs. Using this method, a multi-pixel array can be operated by only one feed line. Consequently, the system complexity as well as the heat load is significantly reduced. To allocate many pixels into a small bandwidth… ▽ More The concept of the radio-frequency superconducting nanowire single-photon detector (RF-SNSPD) allows frequency-division multiplexing (FDM) of the bias and readout lines of several SNSPDs. Using this method, a multi-pixel array can be operated by only one feed line. Consequently, the system complexity as well as the heat load is significantly reduced. To allocate many pixels into a small bandwidth the quality factor of each device is crucial. In this paper, we present an improved RF-SNSPD design. This new design enables a simple tuning of the quality factor as well as the resonant frequency. With a two-pixel device we have demonstrated the operation without crosstalk between the detectors and showed the time, spatial and photon number resolution. Thereby a single pixel requires only a bandwidth of 14 MHz. △ Less

Submitted 7 December, 2016; originally announced December 2016.

Giant Faraday rotation of high-order plasmonic modes in graphene-covered nanowires

Authors: Dmitry A. Kuzmin, Igor V. Bychkov, Vladimir G. Shavrov, Vasily V. Temnov

Abstract: Plasmonic Faraday rotation in nanowires manifests itself in the rotation of the spatial intensity distribution of high-order surface plasmon polariton (SPP) modes around the nanowire axis. Here we predict theoretically the giant Faraday rotation for SPP propagating on graphene-coated magneto-optically active nanowires. Upon the reversal of the external magnetic field pointing along the nanowire ax… ▽ More Plasmonic Faraday rotation in nanowires manifests itself in the rotation of the spatial intensity distribution of high-order surface plasmon polariton (SPP) modes around the nanowire axis. Here we predict theoretically the giant Faraday rotation for SPP propagating on graphene-coated magneto-optically active nanowires. Upon the reversal of the external magnetic field pointing along the nanowire axis some high-order plasmonic modes may be rotated by up to ~ 100 degrees on scale of about 500 nm at mid-infrared frequencies. Tuning carrier concentration in graphene by chemical doping or gate voltage allows for controlling SPP-properties and notably the rotation angle of high-order azimuthal modes. Our results open the door to novel plasmonic applications ranging from nanowire-based Faraday isolators to the magnetic control in quantum-optical applications. △ Less

Submitted 1 June, 2016; originally announced June 2016.

Comments: 15 pages, 3 figures, submitted to Nano Letters

Including atomic vibrations in XANES calculations: polarization-dependent damping of the fine structure at the Cu K edge of (creat)$_{2}$CuCl$_{4}$

Authors: Ondrej Sipr, Jiri Vackar, Alexei Kuzmin

Abstract: Atomic vibrations are usually not taken into account when analyzing x-ray absorption near edge structure (XANES) spectra. One of the reasons is that including the vibrations in a formally exact way is quite complicated while the effect of vibrations is supposed to be small in the XANES region. By analyzing polarized Cu K edge x-ray absorption spectra of creatinium tetrachlorocuprate [(creat)… ▽ More Atomic vibrations are usually not taken into account when analyzing x-ray absorption near edge structure (XANES) spectra. One of the reasons is that including the vibrations in a formally exact way is quite complicated while the effect of vibrations is supposed to be small in the XANES region. By analyzing polarized Cu K edge x-ray absorption spectra of creatinium tetrachlorocuprate [(creat)$_{2}$CuCl$_{4}$], we demonstrate that a technically simple method, consisting in calculating the XANES via the same formula as for static systems but with a modified free-electron propagator which accounts for fluctuations of interatomic distances, may substantially help in understanding XANES of some layered systems. In particular we show that the difference in the damping of the x-ray absorption fine structure oscillations for different polarisations of the incoming x-rays cannot be reproduced by calculations which rely on a static lattice but it can be described if atomic vibrations are accounted for in such a way that individual creatinium and CuCl$_{4}$ molecular blocks are treated as semi-rigid entities while the mutual positions of these blocks are subject to large mean relative displacements. △ Less

Submitted 3 May, 2016; originally announced May 2016.

Journal ref: Journal of Synchrotron Radiation 23, 1433-1439 (2016)

Electromagnetic waves reflection, transmission and absorption by graphene - magnetic semiconductor - graphene sandwich-structure in magnetic field: Faraday geometry

Authors: Dmitry A. Kuzmin, Igor V. Bychkov, Vladimir G. Shavrov

Abstract: Electrodynamic properties of the graphene - magnetic semiconductor - graphene sandwich-structure have been investigated theoretically with taking into account the dissipation processes. Influence of graphene layers on electromagnetic waves propagation in graphene - semi-infinte magnetic semiconductor and graphene - magnetic semiconductor - graphene sandwich-structure has been analyzed. Frequency a… ▽ More Electrodynamic properties of the graphene - magnetic semiconductor - graphene sandwich-structure have been investigated theoretically with taking into account the dissipation processes. Influence of graphene layers on electromagnetic waves propagation in graphene - semi-infinte magnetic semiconductor and graphene - magnetic semiconductor - graphene sandwich-structure has been analyzed. Frequency and field dependences of the reflectance, transmittance and absorbtance of electromagnetic waves by such structure have been calculated. The size effects associated with the thickness of the structure have been analyzed. The possibility of efficient control of electrodynamic properties of graphene - magnetic semiconductor - graphene sandwich structure by an external magnetic field has been shown. △ Less

Submitted 10 July, 2014; originally announced July 2014.

Comments: 8 pages, 7 figures, In Press in Photonics and Nanostructures - Fundamentals and Applications. arXiv admin note: text overlap with arXiv:1405.3585

Journal ref: Photonics and Nanostructures - Fundamentals and Applications, V. 12, I. 5, pp. 473-481, 2014

Electromagnetic Waves Reflectance of Graphene -- Magnetic Semiconductor Superlattice in Magnetic Field

Authors: Dmitry A. Kuzmin, Igor V. Bychkov, Vladimir G. Shavrov

Abstract: Electrodynamic properties of the graphene - magnetic semiconductor - graphene superlattice placed in magnetic field have been investigated theoretically in Faraday geometry with taking into account dissipation processes. Frequency and field dependences of the reflectance, transmittance and absorbtance of electromagnetic waves by such superlattice have been calculated for different numbers of perio… ▽ More Electrodynamic properties of the graphene - magnetic semiconductor - graphene superlattice placed in magnetic field have been investigated theoretically in Faraday geometry with taking into account dissipation processes. Frequency and field dependences of the reflectance, transmittance and absorbtance of electromagnetic waves by such superlattice have been calculated for different numbers of periods of the structure and different sizes of the periods with using a transfer matrix method. The possibility of efficient control of electrodynamic properties of graphene - magnetic semiconductor - graphene superlattice has been shown. △ Less

Submitted 11 May, 2014; originally announced May 2014.

Comments: 4 pages, 3 figures, in press in IEEE Transactions on Magnetics

Journal ref: IEEE Transaction on Magnetics, V. 50, I. 11, Article # 2505004, 2014

Spectrum of Coupled Waves in Orthorhombic Multiferroics With Cycloidal Antiferromagnetic Structure in External Electric and Magnetic Fields

Authors: Igor V. Bychkov, Dmitry A. Kuzmin, Vladimir G. Shavrov

Abstract: Spectrum of coupled spin, acoustic, electro-dipole and electromagnetic waves in orthorhombic perovskite multiferroics placed in external electric and magnetic field has been calculated. Frequency and field dependencies of electric, magnetic, and magnetoelectric susceptibilities of multiferroics with cycloidal antiferromagnetic structure in external electric and magnetic fields have been investigat… ▽ More Spectrum of coupled spin, acoustic, electro-dipole and electromagnetic waves in orthorhombic perovskite multiferroics placed in external electric and magnetic field has been calculated. Frequency and field dependencies of electric, magnetic, and magnetoelectric susceptibilities of multiferroics with cycloidal antiferromagnetic structure in external electric and magnetic fields have been investigated as well. The spectrum of coupled waves has a band structure. Width and frequency ranges of bands depend on external fields. The possibility of control of electrodynamic properties of orthorhombic perovskite multiferroics with cycloidal antiferromagnetic structure by external electric and magnetic fields has been shown. △ Less

Submitted 17 July, 2013; originally announced July 2013.

Comments: 4 pages, 2 figures, at print in IEEE Transactions on Magnetics

Journal ref: IEEE Transactions on Magnetics, vol.49, no.8, pp.4695-4698, Aug. 2013

Magnetoelectric susceptibility tensor of multiferroic TbMnO3 with cycloidal antiferromagnetic structure in external field

Authors: Igor V. Bychkov, Dmitry A. Kuzmin, Sergey J. Lamekhov, Vladimir G. Shavrov

Abstract: Magnetoelectric, dielectric and magnetic susceptibility tensors of multiferroic TbMnO3 with cycloidal antiferromagnetic structure in external electric and magnetic fields have been investigated with taking into account dynamics of spin, electro-dipole and acoustic subsystems. All components of tensors depend on values of external electric and magnetic fields. The possibility of control of electrod… ▽ More Magnetoelectric, dielectric and magnetic susceptibility tensors of multiferroic TbMnO3 with cycloidal antiferromagnetic structure in external electric and magnetic fields have been investigated with taking into account dynamics of spin, electro-dipole and acoustic subsystems. All components of tensors depend on values of external electric and magnetic fields. The possibility of control of electrodynamic properties of multiferroic TbMnO3 with cycloidal antiferromagnetic structure by external electric and magnetic fields has been shown. The resonant interaction of spin, electro-dipole, electromagnetic and acoustic waves in such material is observed. △ Less

Submitted 18 February, 2013; originally announced February 2013.

Comments: 9 pages, 1 figure, accepted in Journal of Applied Physics

Journal ref: J. Appl. Phys. 113, 17C726 (2013)

Electronic structure of cubic ScF$_3$ from first-principles calculations

Authors: P. Zhgun, D. Bocharov, S. Piskunov, A. Kuzmin, J. Purans

Abstract: The first-principles calculations have been performed to investigate the ground state properties of cubic scandium trifluoride (ScF$_3$) perovskite. Using modified hybrid exchange-correlation functionals within the density functional theory (DFT) we have comprehensively compared the electronic properties of ScF$_3$ obtained by means of the linear combination of atomic orbitals (LCAO) and projector… ▽ More The first-principles calculations have been performed to investigate the ground state properties of cubic scandium trifluoride (ScF$_3$) perovskite. Using modified hybrid exchange-correlation functionals within the density functional theory (DFT) we have comprehensively compared the electronic properties of ScF$_3$ obtained by means of the linear combination of atomic orbitals (LCAO) and projector augmented-waves (PAW) methods. Both methods allowed us to reproduce the lattice constant experimentally observed in cubic ScF$_3$ at low temperatures and predict its electronic structure in good agreement with known experimental valence-band photoelectron and F 1$s$ X-ray absorption spectra. △ Less

Submitted 24 November, 2012; originally announced November 2012.