Showing 1–38 of 38 results for author: Kutnjak, Z

Strain-Gradient and Curvature-Induced Changes in Domain Morphology of BaTiO3 Nanorods: Experimental and Theoretical Studies

Authors: Olha A. Kovalenko, Eugene A. Eliseev, Yuriy O. Zagorodniy, Srečo Davor Škapin, Marjeta Maček Kržmanc, Lesya Demchenko, Valentyn V. Laguta, Zdravko Kutnjak, Dean R. Evans, Anna N. Morozovska

Abstract: We investigate the impact of OH- ions incorporation on the lattice strain and spontaneous polarization of BaTiO3 nanorods synthesized under different conditions. It was confirmed that the lattice strain depends directly on Ba supersaturation, with higher supersaturation leading to an increase in the lattice strain. However, it was shown that crystal growth and observed lattice distortion are not p… ▽ More We investigate the impact of OH- ions incorporation on the lattice strain and spontaneous polarization of BaTiO3 nanorods synthesized under different conditions. It was confirmed that the lattice strain depends directly on Ba supersaturation, with higher supersaturation leading to an increase in the lattice strain. However, it was shown that crystal growth and observed lattice distortion are not primarily influenced by external strain; rather, OH- ions incorporation plays a key role in generating internal chemical strains and driving these processes. By using the less reactive TiO2 precursor instead of TiOCl2 and controlling Ba supersaturation, the slower nucleation rate enables more effective regulation of OH- ions incorporation and crystal growth. This in turn effects both particle size and lattice distortion, leading to c/a ratio of 1.013 - 1.014. The incorporation of OH- ions induces lattice elongation along the c-axis, contributing to anisotropic growth, increasing of the rod diameter and their growth-induced bending. However, the possibility of the curvature-induced changes in domain morphology of BaTiO3 nanorods remains almost unexplored. To study the possibility, we perform analytical calculations and finite element modeling, which provide insights into the curvature-induced changes in the strain-gradient, polarization distribution, and domain morphology in BaTiO3 nanorods. Theoretical results reveal the appearance of the domain stripes in BaTiO3 nanorod when the curvature exceeds a critical angle. The physical origin of the domain stripes emergence is the tendency to minimize its elastic energy of the nanorod by the domain splitting. These findings suggest that BaTiO3 nanorods, with curvature-controllable amount of domain stripes, could serve as flexible race-track memory elements for flexo-tronics and domain-wall electronics. △ Less

Submitted 14 May, 2025; originally announced May 2025.

Comments: 37 pages, including 11 figures and 3 Appendices

Interfacial Effects and Negative Capacitance State in P(VDF-TrFE) Films with BaTiO3 Nanoparticles

Authors: Oleksii V. Bereznykov, Oleksandr S. Pylypchuk, Victor I. Styopkin, Serhii E. Ivanchenko, Denis O. Stetsenko, Eugene A. Eliseev, Zdravko Kutnjak, Vladimir N. Poroshin, Anna N. Morozovska, Nicholas V. Morozovsky

Abstract: We analyze the temperature dependences of the effective dielectric permittivity of P(VDF-TrFE) films with BaTiO3 nanoparticles (with the average size 24 nm). Transition from a weak to a strong nonlinear temperature dependence of the dielectric permittivity is observed near the freezing temperature (near -50 °C) of P(VDF-TrFE). The transition is followed by a diffuse step-like change in the tempera… ▽ More We analyze the temperature dependences of the effective dielectric permittivity of P(VDF-TrFE) films with BaTiO3 nanoparticles (with the average size 24 nm). Transition from a weak to a strong nonlinear temperature dependence of the dielectric permittivity is observed near the freezing temperature (near -50 °C) of P(VDF-TrFE). The transition is followed by a diffuse step-like change in the temperature range (0 - 40)°C, and a subsequent maximum of the dielectric permittivity in the P(VDF-TrFE) films with a lower content (~20-40 vol.%) of BaTiO3 nanoparticles; or by a quasi-plateau of the dielectric permittivity in the P(VDF-TrFE) films with a higher content (~ 50-70 vol.%) of BaTiO3 nanoparticles. The frequency dispersion of the dielectric permittivity is significant in the vicinity of its maxima. The temperature-frequency shift of the permittivity region with a strong temperature dependence is positive. The temperature-frequency shift of the maxima is insignificant (or negative) for the P(VDF-TrFE) films with lower content of BaTiO3 nanoparticles. Increasing the content of BaTiO3 nanoparticles leads to a significant increase in the relative dielectric permittivity of the P(VDF-TrFE)-BaTiO3 films compared to pure P(VDF-TrFE) films (from 8 to 50 at 25 °C). At the same time, the voltage response of the studied P(VDF-TrFE)/BaTiO3 films to the frequency-modulated IR radiation flux has rather photoelectric than pyroelectric nature. A phenomenological model, which considers the screening charges at the interfaces, as well as dipole-dipole cross-interaction effects between the ferroelectric nanoparticles, is proposed to describe the temperature and frequency behavior of the effective dielectric permittivity. The negative capacitance state, which originates due to the interfacial effects, is predicted in the P(VDF-TrFE) films with a high content of BaTiO3 nanoparticles. △ Less

Submitted 18 April, 2025; originally announced April 2025.

Comments: 42 pages, 10 figures, 1 appenndix

Lithium doping's effects on the microstructural,dielectric,energy storage,optical and electrical properties of BaTi0.89Sn0.11O3 ceramics

Authors: S. Ayadh, S. Touili, Y. Hadouch, S. Elmouloua, M. Amjoud, D. Mezzane, L. Essaleh, K. Pushkarova, Z. Kutnjak, I. Luk'Yanchuk, M. El Marssi

Abstract: This research study the sol/gel synthesis of lithium-doped barium stannate titanate BaTi0.89Sn0.11O3 (BTS11) and investigates how varying composition with lithium affect its structural, morphological, ferroelectric, optical, and electrical properties. The phase of the sol/gel prepared samples with different compositions BaLixTi0.89Sn0.11O3 (BLxTS11), where x = 0%, 2%, 4%, 6%, 8, and 10%, was exami… ▽ More This research study the sol/gel synthesis of lithium-doped barium stannate titanate BaTi0.89Sn0.11O3 (BTS11) and investigates how varying composition with lithium affect its structural, morphological, ferroelectric, optical, and electrical properties. The phase of the sol/gel prepared samples with different compositions BaLixTi0.89Sn0.11O3 (BLxTS11), where x = 0%, 2%, 4%, 6%, 8, and 10%, was examined using X-ray diffraction (XRD), which showed the development of a pure perovskite structure. Furthermore, structural characterization was performed with Raman spectroscopy to identify changes in structure and chemical environment resulting from Li incorporation. The doping caused changes in the morphology and grain size of BLxTS11 pellets, as examined through SEM micrographs. These micrographs showed clear alterations in grain size that were inversely related to the lattice strain of BLxTS11. The samples were subsequently examined for their ferroelectric properties. All samples exhibited their maximum dielectric constant at approximately 45-50 °C. Furthermore, relationships between the chemical, structural, and morphological characteristics of the BLxTS11 ceramics and their energy storage capabilities were identified. Based on the P-E hysteresis behavior, the BL6TS11 ceramic (x=6%) ferroelectric exhibited superior energy-storage capabilities, featuring a recoverable energy-storage density of 225 mJ/cm3 and an energy-storage efficiency of 60%. An examination of the material's optical and electrical properties revealed that Li doping led to a reduction in the band gap values and a considerable increase in resistivity. △ Less

Submitted 20 March, 2025; originally announced March 2025.

Current Advances in Magnetoelectric Composites with Various Interphase Connectivity Types

Authors: Youness Hadouch, Daoud Mezzane, M barek Amjoud, Hana Ursic, Abdelilah Lahmar, Brigita Rozic, Igor Lukyanchuk, Zdravko Kutnjak, Mimoun El Marssi

Abstract: Magnetoelectric composites integrate the coupling between magnetic and piezoelectric materials to create new functionalities for potential technological applications. This coupling is typically achieved through the exchange of magnetic, electric, or elastic energy across the interfaces between the different constituent materials. Tailoring the strength of the magnetoelectric effect is primarily ac… ▽ More Magnetoelectric composites integrate the coupling between magnetic and piezoelectric materials to create new functionalities for potential technological applications. This coupling is typically achieved through the exchange of magnetic, electric, or elastic energy across the interfaces between the different constituent materials. Tailoring the strength of the magnetoelectric effect is primarily accomplished by selecting suitable materials for each constituent and by optimizing geometrical and microstructural designs. Various composite architectures, such as (0-3), (2-2), (1-3) and core-shell connectivities, have been studied to enhance magnetoelectric coupling and other required physical properties in composites. This review examines the latest advancements in magnetoelectric materials, focusing on the impact of different interphase connectivity types on their properties and performance. Before exploring magnetic-electric coupling, a brief overview of the historical background of multiferroic magnetoelectric composites is provided. Fundamental concepts underlying the magnetoelectric effect, piezoelectricity, and the magnetostrictive effect are explained, including their origins and examples of these materials' properties. So far, three types of magnetoelectric composite connectivities have been investigated experimentally: particulate composites (0-3), laminated and thin films (2-2), sticks embedded in matrix, core-shell particles, and coaxial fibers. An outlook on the prospects and scientific challenges in the field of multiferroic magnetoelectric composites is given at the end of this review. △ Less

Submitted 17 March, 2025; originally announced March 2025.

BCZT/LSMO/BCZT multilayer films for high temperature energy storage capacitors

Authors: Afaak Lakouader, Abdelilah Lahmar, Spela Kunej, Daoud Mezzane, Jamal Belhadi, El Hassan Choukri, Lahoucine Hajji, Mbarek Amjoud, Zdravko Kutnjak, Igor A. Lukyanchuk, Mimoun El Marssi

Abstract: Ba0.85Ca0.15Zr0.1Ti0.9O3/La0.8Sr0.2MnO3/Ba0.85Ca0.15Zr0.1Ti0.9O3 (BCZT/LSMO/BCZT) sandwich films were elaborated using the sol-gel spin coating process. The dielectric properties displayed excellent thermal stability with the temperature coefficient of capacitance, TCC, remaining within 10% between -50 C and 300 C. The high energy storage density, Wrec, of 11.8 J/cm3 observed in this sandwich film… ▽ More Ba0.85Ca0.15Zr0.1Ti0.9O3/La0.8Sr0.2MnO3/Ba0.85Ca0.15Zr0.1Ti0.9O3 (BCZT/LSMO/BCZT) sandwich films were elaborated using the sol-gel spin coating process. The dielectric properties displayed excellent thermal stability with the temperature coefficient of capacitance, TCC, remaining within 10% between -50 C and 300 C. The high energy storage density, Wrec, of 11.8 J/cm3 observed in this sandwich films, is nearly twice as high as that of the BCZT films, with an efficiency, n, of 77% under a weak electric field of 800 kV/cm. Furthermore, the stability of Wrec and n was observed along the studied temperature interval making them promising candidates for high-temperature energy storage capacitors. △ Less

Submitted 11 March, 2025; originally announced March 2025.

Improved thermal stability of dielectric properties and energy storage properties of lead-free relaxor Ba(1-x)LaxTi0.89Sn0.11O3 ceramics

Authors: S. Khardazi, D. Mezzane, M. Amjoud, N. Novak, E. Choukri, S. Lyubchyk, Z. Kutnjak, B. Rožič, S. Terenchuk, I. Lukyanchuk

Abstract: Lead-free perovskite ceramics Ba(1-x)LaxTi0.89Sn0.11O3 with x= 0, 0.015, 0.025, and 0.035 (BLTSnx) were synthesized by solid-state reaction method. The enhanced energy storage properties were studied across the ferroelectric relaxor conversion. The pure perovskite structure of all prepared samples was confirmed by X-ray diffraction (XRD) analysis and the Raman spectroscopy technique. Scanning elec… ▽ More Lead-free perovskite ceramics Ba(1-x)LaxTi0.89Sn0.11O3 with x= 0, 0.015, 0.025, and 0.035 (BLTSnx) were synthesized by solid-state reaction method. The enhanced energy storage properties were studied across the ferroelectric relaxor conversion. The pure perovskite structure of all prepared samples was confirmed by X-ray diffraction (XRD) analysis and the Raman spectroscopy technique. Scanning electron microscopy micrographs show a drastic decrease in the grain size in La-doped ceramics. Furthermore, the doped samples exhibit smeared phase transition and frequency dispersion in dielectric permittivity, typical for relaxors. The P-E hysteresis loops become thin with the increase of the La-doping, demonstrating the ferroelectric-relaxor phase conversion. The enhanced recovered energy density and the energy storage efficiency of 158.8 mJ/cm3 and 82.73 % were observed in the BLTSn2.5 sample at room temperature, respectively. These properties indicate that environmentally friendly BLTSn2.5 is a viable candidate for energy-storage capacitor applications near room temperature. △ Less

Submitted 11 March, 2025; originally announced March 2025.

Comments: 27 pages, 9 figures

Impact of Polymeric precursor and Auto-combustion on the Structural, Microstructural, Magnetic, and Magnetocaloric Properties of La0.8Sr0.2MnO3

Authors: Afaak Lakouader, Youness Hadouch, Daoud Mezzane, Valentin Laguta, Mbarek Amjoud, Voicu Octavian Dolocan, Nikola Novak, Lahoucine Hajji, El Hassan Choukri, Anna Razumnaya, Abdelhadi Alimoussa, Zdravko Kutnjak, Igor A. Lukyanchuk, Mimoun El Marssi

Abstract: In this work, La0.8Sr0.2MnO3 (LSMO) nanopowders are synthesized using two different methods: Pechini (LSMO-PC) and auto-combustion (LSMO-AC). Nanoparticle sizes, structural, magnetic, and magnetocaloric properties were determined and compared. The X-ray diffraction confirms the coexistence of two phases; rhombohedral symmetry with space group R-3c and orthorhombic symmetry with space group Pbnm, w… ▽ More In this work, La0.8Sr0.2MnO3 (LSMO) nanopowders are synthesized using two different methods: Pechini (LSMO-PC) and auto-combustion (LSMO-AC). Nanoparticle sizes, structural, magnetic, and magnetocaloric properties were determined and compared. The X-ray diffraction confirms the coexistence of two phases; rhombohedral symmetry with space group R-3c and orthorhombic symmetry with space group Pbnm, with the rhombohedral phase dominating. The scanning electron microscope images show that LSMO-PC has larger nanoparticle sizes (~495 nm) than LSMO-AC (~195 nm). The samples exhibit ferromagnetic properties with distinct hysteresis loops and Curie temperatures 340 K and 290 K for LSMO-PC and LSMO-AC respectively. The variation of the magnetic entropy was measured indirectly using the Maxwell approach with increasing magnetic field. For LSMO-PC it reaches a maximum -dSM=1.69 J/kg.K at 340 K and dH= 5 T. The associated adiabatic temperature change dTM is 1.04 K. While LSMO-PC demonstrates superior magnetic and magnetocaloric properties, LSMO-AC displays significant magnetocaloric thermal stability. The obtained values make LSMO-PC and LSMO-AC promising candidates for eco-friendly room-temperature magnetocaloric applications. △ Less

Submitted 18 May, 2024; originally announced May 2024.

Size-Induced High Electrocaloric Response of Dense Ferroelectric Nanocomposites

Authors: Anna N. Morozovska, Oleksandr S. Pylypchuk, Serhii Ivanchenko, Eugene A. Eliseev, Hanna V. Shevliakova, Lubomir Korolevich, Lesya P. Yurchenko, Oleksandr V. Shyrokov, Nicholas V. Morozovsky, Vladimir N. Poroshin, Zdravko Kutnjak, Victor V. Vainberg

Abstract: Analytical results obtained within Landau-Ginzburg-Devonshire approach and effective media models, predict that the synergy of size effects and Vegard stresses can significantly enhance the electrocaloric cooling (up to 7 times) of the BaTiO3 nanoparticles in comparison with a bulk BaTiO3. To compare with the considered effective media models, we measured the capacitance-voltage and current-voltag… ▽ More Analytical results obtained within Landau-Ginzburg-Devonshire approach and effective media models, predict that the synergy of size effects and Vegard stresses can significantly enhance the electrocaloric cooling (up to 7 times) of the BaTiO3 nanoparticles in comparison with a bulk BaTiO3. To compare with the considered effective media models, we measured the capacitance-voltage and current-voltage characteristics of the dense nanocomposites consisting of (28-35) vol.% BaTiO3 nanoparticles incorporated in organic polymers and determined experimentally the effective dielectric permittivity and losses of the composites. Generalizing obtained analytical results, various ferroelectric nanoparticles spontaneously stressed by elastic defects, such as oxygen vacancies or any other elastic dipoles, which create a strong chemical pressure, can cause the giant electrocaloric response of dense ferroelectric nanocomposites. We have shown that the advantages of the studied lead-free dense nanocomposites are the good tunability of electrocaloric cooling temperature due to the size effects in ferroelectric nanoparticles and the easy control of the high electrocaloric cooling by electric fields. This makes the dense ferroelectric nanocomposites promising for cooling of conventional and innovative electronic elements, such as FETs with high-temperature superconductor channels. △ Less

Submitted 18 September, 2023; v1 submitted 6 September, 2023; originally announced September 2023.

Comments: 42 pages, including 7 figures and 3 appendices

Journal ref: Ceramics International 50 (7b), 11743 (2024)

Magnetoelectric coupling in multiferroic CFO/BCTSn core shell nanofibers elaborated by co-axial electrospinning method

Authors: Youness Hadouch, Daoud Mezzane, M'barek Amjoud, Valentin Laguta, Khalid Hoummada, Voicu Octavian Dolocan, Mustapha Jouiad, Mohammed Lahcini, Hana Ursic, Nikola Novak, Zdravko Kutnjak, Yaovi Gagou, Igor Lukyanchuk, Mimoun El Marssi

Abstract: Multiferroic CoFe2O4-Ba0.95Ca0.05Ti0.89Sn0.11O3 core-shell nanofibers (CFO@BCTSn NFs) were synthesized by a sol-gel co-axial electrospinning technique. The scanning electron microscope and transmission electron microscope were used to check nanofibers' core-shell structure/configuration. X-ray diffraction and a high-resolution transmission electron microscope were used to confirm the spinel struct… ▽ More Multiferroic CoFe2O4-Ba0.95Ca0.05Ti0.89Sn0.11O3 core-shell nanofibers (CFO@BCTSn NFs) were synthesized by a sol-gel co-axial electrospinning technique. The scanning electron microscope and transmission electron microscope were used to check nanofibers' core-shell structure/configuration. X-ray diffraction and a high-resolution transmission electron microscope were used to confirm the spinel structure of CFO and the perovskite structure of BCTSn. The magnetic character of the resultant CFO@BCTSn NFs was determined by SQUID magnetometry. The piezoelectricity was verified using piezo-response force microscopy, which revealed an entirely covered ferroelectric shell outline, in accordance with SEM and TEM observations. The magnetoelectric (ME) coefficient was measured as a function of the applied external DC magnetic field. The maximum ME coefficient obtained for the CFO@BCTSn NFs was 346 mV cm-1 Oe-1. The high magnetoelectric coupling suggests that CFO@BCTSn NFs could be a promising candidate for magnetic field sensor and magnetoelectric device applications. △ Less

Submitted 23 July, 2023; originally announced July 2023.

Enhanced thermal stability of dielectric and energy storage properties in 0.4BCZT-0.6BTSn lead-free ceramics elaborated by sol-gel method

Authors: S. Khardazi, H. Zaitouni, A. Neqali, S. Lyubchyk, D. Mezzane, M. Amjoud, E. Choukri, S. Lyubchyk, Z. Kutnjak

Abstract: Polycrystalline lead-free Ba$_{0.85}$Ca$_{0.15}$Zr$_{0.10}$Ti$_{0.90}$O$_3$ (BCZT), BaTi$_{0.89}$Sn$_{0.11}$O$_3$ (BTSn) and 0.4Ba$_{0.85}$Ca$_{0.15}$Zr$_{0.10}$Ti$_{0.90}$O$_3$-0.6BaTi$_{0.89}$Sn$_{0.11}$O$_3$ (0.4BCZT-0.6BTSn) ferroelectric ceramics were prepared via sol gel process and their structural, dielectric and energy storage properties were studied. Pure perovskite structure was confirm… ▽ More Polycrystalline lead-free Ba$_{0.85}$Ca$_{0.15}$Zr$_{0.10}$Ti$_{0.90}$O$_3$ (BCZT), BaTi$_{0.89}$Sn$_{0.11}$O$_3$ (BTSn) and 0.4Ba$_{0.85}$Ca$_{0.15}$Zr$_{0.10}$Ti$_{0.90}$O$_3$-0.6BaTi$_{0.89}$Sn$_{0.11}$O$_3$ (0.4BCZT-0.6BTSn) ferroelectric ceramics were prepared via sol gel process and their structural, dielectric and energy storage properties were studied. Pure perovskite structure was confirmed by X ray diffraction analysis. The evolution of energy storage performances with temperature was studied. A Significant recoverable energy storage density of 137.86 mJ/cm$^3$ and high energy-storage efficiency of 86.19% under a moderate electric field of 30 kV/cm were achieved in the composite 0.4BCZT 0.6BTSn ceramic at 353 $^\circ$K. Moreover, excellent temperature stability (70-130 $^\circ$C) of the energy storage efficiency (less than 3%) was achieved. △ Less

Submitted 11 June, 2023; originally announced June 2023.

Room-temperature magnetoelectric effect in lead-free multiferroic $(1-x)$ Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$-$(x)$CoFe$_2$O$_4$ particulate composites

Authors: Youness Hadouch, Daoud Mezzane, M barek Amjoud, Nouredine Oueldna, Yaovi Gagou, Zdravko Kutnjak, Valentin Laguta, Yakov Kopelevich, Khalid Hoummada, Mimoun El Marssi

Abstract: Multiferroic particulate composites $(1-x)$ Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$-$(x)$CoFe$_2$O$_4$ with ($x$ = 0.1, 0.2, 0.3, 0.4 and 0.5) have been prepared by mechanical mixing of the calcined and milled individual ferroic phases. X-ray diffraction and Raman spectroscopy analysis confirmed the formation of both perovskite Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$ (BCTSn) an… ▽ More Multiferroic particulate composites $(1-x)$ Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$-$(x)$CoFe$_2$O$_4$ with ($x$ = 0.1, 0.2, 0.3, 0.4 and 0.5) have been prepared by mechanical mixing of the calcined and milled individual ferroic phases. X-ray diffraction and Raman spectroscopy analysis confirmed the formation of both perovskite Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$ (BCTSn) and spinel CoFe$_2$O$_4$ (CFO) phases without the presence of additional phases. The morphological properties of the composites were provided by using Field Emission Scanning Electron Microscopy. The BCTSn-CFO composites exhibit multiferroic behavior at room temperature, as evidenced by ferroelectric and ferromagnetic hysteresis loops. The magnetoelectric (ME) coupling was measured under a magnetic field up to 10 kOe and the maximum ME response found to be 0.1 mV /cm/ Oe for the composition 0.7 BCTSn-0.3 CFO exhibiting a high degree of pseudo-cubicity and large density. △ Less

Submitted 8 June, 2023; originally announced June 2023.

Enhanced electrocaloric and energy-storage properties of environment-friendly ferroelectric Ba0.9Sr0.1Ti1-xSnxO3 ceramics

Authors: Hajar Zaitouni, Lahoucine Hajji, Daoud Mezzane, El Hassan Choukri, Anna Razumnaya, Yaovi Gagou, Khalid Hoummada, Abdelhadi Alimoussa, Brigita Rozic, Dejvid Cresnar, Mimoun El Marssi, Zdravko Kutnjak

Abstract: The electrocaloric (EC) effect and energy storage properties of eco-friendly ferroelectric Ba0.9Sr0.1Ti1-xSnxO3 (BSTS-x) ceramics prepared by the conventional solid-state reaction method were studied. Significant energy efficiency exceeding 80% was found in our samples. In particular, BSTS-5 and BSTS-10 samples exhibit 92% and 88% efficiency, respectively, over a wide temperature range around room… ▽ More The electrocaloric (EC) effect and energy storage properties of eco-friendly ferroelectric Ba0.9Sr0.1Ti1-xSnxO3 (BSTS-x) ceramics prepared by the conventional solid-state reaction method were studied. Significant energy efficiency exceeding 80% was found in our samples. In particular, BSTS-5 and BSTS-10 samples exhibit 92% and 88% efficiency, respectively, over a wide temperature range around room temperature (RT). Direct EC measurement and an indirect method based on the thermodynamic approach were used to characterize the EC effect, and both yielded consistent results. The largest electrocaloric responsivity of 0.73 K mm/kV was obtained for BSTS-0 at 368 K with an adiabatic temperature change DT(EC) of 0.55 K at a low applied electric field of only 7.4 kV/cm. With increasing Sn-content, the EC response of BSTS-x ceramics decreases, while their diffuseness increases over an extensive temperature range, centered at RT. A significant coefficient of performance (COP > 26) was found for our samples. The obtained results demonstrate the possibility of designing eco-friendly materials with higher EC effect and energy efficiency for potential solid-state refrigeration and energy storage devices. △ Less

Submitted 28 September, 2022; originally announced September 2022.

Improved energy storage and electrocaloric properties of lead-free Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramic

Authors: Afaak Lakouader, Hanane Mezzourh, Daoud Mezzane, M'barek Amjoud, Lahoucine Hajji, El Hassan Choukri, Igor A. Luk'yanchuk, Zdravko Kutnjak, Mimoun El Marssi

Abstract: Lead-free ba0.85ca0.15zr0.1ti0.9o3 (bczt) ceramic powders were synthesized using the sol-gel method. to achieve high-energy storage and large electrocaloric effect in bulk ceramics the ceramics thickness was reduced. dielectric, ferroelectric, energy storage, and electrocaloric properties were investigated for bczt ceramic with 400 μm. here, pure crystalline structure and homogenous microstructure… ▽ More Lead-free ba0.85ca0.15zr0.1ti0.9o3 (bczt) ceramic powders were synthesized using the sol-gel method. to achieve high-energy storage and large electrocaloric effect in bulk ceramics the ceramics thickness was reduced. dielectric, ferroelectric, energy storage, and electrocaloric properties were investigated for bczt ceramic with 400 μm. here, pure crystalline structure and homogenous microstructure were identified by xrd analysis and sem measurements, respectively. the dielectric measurements revealed a maximum dielectric constant associated with ferroelectric-paraelectric phase transition. the maximum of ε was 7841 around 352 k. furthermore, the bczt ceramic showed improved energy storage and electrocaloric properties. a high recoverable energy density wrec of 0.24 j/cm3 and a total energy density wtotal of 0.27 j/cm3 with an efficiency coefficient of ~ 88% at 423 k under an electric field of 55 kv/cm was obtained. besides, the maximum value of δt = 2.32 k, the electrocaloric responsivity ζ = 0.42 k mm/kv, the refrigeration capacity rc= 4.59 j/kg and the coefficient of performance cop = 12.38 were achieved around 384 k under 55 kv/cm. the total energy density wtotal and the temperature change δt were also calculated by exploiting the landau-ginzburg-devonshire (lgd) theory. the theoretical results matched the experimental findings. these results suggest that the synthesized bczt ceramic with the reduced thickness could be a promising candidate for energy storage and electrocaloric applications. △ Less

Submitted 27 September, 2022; originally announced September 2022.

Enhanced RCP and large inverse magnetocaloric effect of CoFe$_2$O$_4$ nanoparticles synthesized by auto-combustion method

Authors: Youness Hadouch, Daoud Mezzane, M'Barek Amjoud, Lahoucine Hajji, Yaovi Gagou, Zdravko Kutnjak, Valentin Laguta, Yakov Kopelevich, Mimoun El Marssi

Abstract: This work focuses on the microstructure, magnetic properties and magnetocaloric effect of CoFe$_2$O$_4$ (CFO) nanoparticles elaborated by sol-gel auto combustion method. The XRD investigation indicates that CFO is crystallized in a cubic spinel structure and the SEM micrograph shows a fine quasi-spherical with an average grain sizes of 160 nm. The temperature dependence of the Raman spectra reveal… ▽ More This work focuses on the microstructure, magnetic properties and magnetocaloric effect of CoFe$_2$O$_4$ (CFO) nanoparticles elaborated by sol-gel auto combustion method. The XRD investigation indicates that CFO is crystallized in a cubic spinel structure and the SEM micrograph shows a fine quasi-spherical with an average grain sizes of 160 nm. The temperature dependence of the Raman spectra reveals the ferromagnetic to paramagnetic (FM-PM) transition started from 723 K and the magnetization versus temperature measurements shows the Curie temperature located at T$_{\rm C}$ = 785 K. Large value of magnetocaloric temperature change of $Δ$T =11.2 K with a high RCP of 687.56 J Kg$^{-1}$ are achieved indirectly via the Maxwell approach making our CFO nanopowder suitable candidate for both environmentally friendly magnetic refrigeration and medical applications at ambient temperature. △ Less

Submitted 11 August, 2023; v1 submitted 21 September, 2022; originally announced September 2022.

Electrocaloric effect and high energy storage efficiency in lead-free Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$ ceramic elaborated by sol-gel method

Authors: Youness Hadouch, Said Ben Moumen, Hanane Mezzourh, Daoud Mezzane, M'barek Amjoud, Bouchra Asbani, Anna G. Razumnaya, Yaovi Gagou, Brigita Rožič, Zdravko Kutnjak, Mimoun El Marssi

Abstract: Structural, dielectric, ferroelectric, energy storage properties, and electrocaloric effect were studied in lead-free ceramic Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$ (BCTSn) elaborated by sol-gel method. Phase purity structure was confirmed from X-ray data using Rietveld refinement analysis which revealed the coexistence of tetragonal (P4mm) and orthorhombic (Amm2) symmetries at room tem… ▽ More Structural, dielectric, ferroelectric, energy storage properties, and electrocaloric effect were studied in lead-free ceramic Ba$_{0.95}$Ca$_{0.05}$Ti$_{0.89}$Sn$_{0.11}$O$_3$ (BCTSn) elaborated by sol-gel method. Phase purity structure was confirmed from X-ray data using Rietveld refinement analysis which revealed the coexistence of tetragonal (P4mm) and orthorhombic (Amm2) symmetries at room temperature. Phase transitions were detected by dielectric and differential scanning calorimetry results. Energy storage properties were determined from P-E hysteresis, and the electrocaloric properties were calculated indirectly via the Maxwell approach. The large value of electrocaloric temperature change of $Δ$T=0.807 K obtained at a relatively small field of 30 kV cm$^{-1}$ and high energy storage efficiency can make BCTSn ceramic a promising candidate for environmentally friendly refrigeration and energy storage applications. △ Less

Submitted 21 September, 2022; originally announced September 2022.

Enhancing the dielectric, electrocaloric and energy storage properties of lead-free Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramics prepared via sol-gel process

Authors: H. Mezzourh, S. Belkhadir, D. Mezzane, M. Amjoud, E. Choukri, A. Lahmar, Y. Gagou, Z. Kutnjak, M. El Marssi

Abstract: The Ba0.85Ca0.15Zr0.1Ti0.9O3 (BCZT) ceramics were successfully prepared by sol-gel process, and sintered at 1420 degree. The effect of sintering times (2, 4 and 6 h) on structural, microstructural, electric properties, energy storage, and electrocaloric effect was systematically examined. X-ray diffraction (XRD) results show that all the samples crystallize in the pure perovskite structure. The mo… ▽ More The Ba0.85Ca0.15Zr0.1Ti0.9O3 (BCZT) ceramics were successfully prepared by sol-gel process, and sintered at 1420 degree. The effect of sintering times (2, 4 and 6 h) on structural, microstructural, electric properties, energy storage, and electrocaloric effect was systematically examined. X-ray diffraction (XRD) results show that all the samples crystallize in the pure perovskite structure. The morphotropic phase transition from the tetragonal to the orthorhombic phase (T-O) was identified and confirmed by Rietveld refinement. The BCZT ceramic sintered at 1420 degree for 4h possesses a good relative density of 98%, and exhibits optimal properties with a high dielectric permittivity ~16310, a large electrocaloric effect coefficient ~ 0.244Kmm/kV and an energy density storage of ~ 10.61 mJ/cm3. △ Less

Submitted 23 December, 2020; originally announced December 2020.

The electrocaloric response in Lanthanum-modified lead zirconate titanate ceramic

Authors: B. Asbani, J. -L. Dellis, A. Lahmar, M. Amjoud, Y. Gagou, D. Mezzane, Z. Kutnjak, R. Pirc, M. El Marssi, B. Rožič

Abstract: Over the past decades, there has been significant interest in new cooling technology based on the electrocaloric effect. The large electrocaloric effect observed in polymeric and inorganic ferroelectric materials made possible development of dielectric cooling devices of a new generation. We report a significant impact of annealing on the electrocaloric effect observed in 12/65/35 PLZT bulk cerami… ▽ More Over the past decades, there has been significant interest in new cooling technology based on the electrocaloric effect. The large electrocaloric effect observed in polymeric and inorganic ferroelectric materials made possible development of dielectric cooling devices of a new generation. We report a significant impact of annealing on the electrocaloric effect observed in 12/65/35 PLZT bulk ceramics. The electrocaloric data were obtained by direct measurements. Electrocaloric results confirm the existence of the significant electrocaloric response in this relaxor ferroelectric PLZT composition exceeding previously obtained electrocaloric values in perovskite relaxor ferroelectrics such as PMN-PT and x/65/35 PLZT ceramics. △ Less

Submitted 11 December, 2020; originally announced December 2020.

Comments: arXiv admin note: text overlap with arXiv:2006.05079

Tunability of the elastocaloric response in main-chain liquid crystalline elastomers

Authors: M. Lavrič, N. Derets, D. Črešnar, V. Cresta, V. Domenici, A. Rešetič, G. Skačej, M. Sluban, P. Umek, B. Zalar, Z. Kutnjak, B. Rožič

Abstract: Materials exhibiting a large caloric effect could lead to the development of new generation of heat-management technologies that will have better energy efficiency and be potentially more environmentally friendly. The focus of caloric materials investigations has shifted recently from solid-state materials toward soft materials, such as liquid crystals and liquid crystalline elastomers. It has bee… ▽ More Materials exhibiting a large caloric effect could lead to the development of new generation of heat-management technologies that will have better energy efficiency and be potentially more environmentally friendly. The focus of caloric materials investigations has shifted recently from solid-state materials toward soft materials, such as liquid crystals and liquid crystalline elastomers. It has been shown recently that a large electrocaloric effect exceeding 7 K can be observed in smectic liquid crystals. Here, we report on a significant elastocaloric response observed by direct elastocaloric measurements in main-chain liquid crystal elastomers. It is demonstrated that the character of the nematic to paranematic/isotropic transition can be tuned from the supercritical regime towards the first-order regime, by decreasing the density of crosslinkers. In the latter case, the latent heat additionally enhances the elastocaloric response. Our results indicate that a significant elastocaloric response is present in main-chain liquid crystalline elastomers, driven by stress fields much smaller than in solid elastocaloric materials. Therefore, elastocaloric soft materials can potentially play a significant role as active cooling/heating elements in the development of new heat-management devices. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Journal ref: Liquid Crystals, Published online: 09 Jul 2020

Mean field theory and Monte Carlo simulation of Phase transitions and Magnetic Properties of a tridimensional Fe7S8 Compound

Authors: S. Benyoussef, Y. EL Amraoui, H. Ez-Zahraouy, D. Mezzane, Z. Kutnjak, I. A. Luk'yanchuk, M. EL Marssi

Abstract: The structural, electronic and magnetic properties of Fe7S8 material have been studied within the framework of the ab-initio calculations, the mean field approximation (MFA) and Monte Carlo simulation (MCS). Our study shows that two forms of the iron atoms, Fe2+ with spin S=2, and Fe3+ with spin σ=5/2 are the most probable configurations. A mixed Ising model with ferromagnetic spin coupling betwee… ▽ More The structural, electronic and magnetic properties of Fe7S8 material have been studied within the framework of the ab-initio calculations, the mean field approximation (MFA) and Monte Carlo simulation (MCS). Our study shows that two forms of the iron atoms, Fe2+ with spin S=2, and Fe3+ with spin σ=5/2 are the most probable configurations. A mixed Ising model with ferromagnetic spin coupling between Fe2+ and Fe3+ ions and between Fe3+ and Fe3+ ions, and with antiferromagnetic spin coupling between Fe2+ ions of adjacent layers has been used to study the magnetic properties of this compound. We demonstrated that the magnetic phase transition can be either of the first or of the second order, depending on the value of the exchange interaction and crystal field. The presence of vacancies in every second iron layer leads to incomplete cancellation of magnetic moments, hence to the emergence of the ferrimagnetism. Anomalies in the magnetization behavior have been found and compared with the experimental results. △ Less

Submitted 8 December, 2020; originally announced December 2020.

Comments: 18 pages, 14 Figures, 4 Tables

Journal ref: Phys. Scr. 95 (2020) 045803

Structural, dielectric and magnetic studies of (0-3) type multiferroic (1-x) BaTi0.8Sn0.2O3-(x) La0.5Ca0.5MnO3 (0 <x< 1) composite ceramics

Authors: S. Ben Moumen, Y. Hadouch, Y. Gagou, D. Mezzane, M. Amjoud, E. Choukri, Z. Kutnjak, B. Rožič, N. Abdelmoula, H. Khemakhem, Y. El Amraoui, V. Laguta, M. El Marssi

Abstract: Multiferroic composites with the composition (1-x) BaTi0.8Sn0.2O3 - (x) La0.5Ca0.5MnO3 (x =0, 0.3, 0.5, 0.7, 0.9 and 1) were prepared by sol-gel techniques. Rietveld refinements of the composites with 0-3 and 3-0 type connectivities exhibit the formation of pure phases and confirm the fraction of the composite samples. It was found that the composites grain size decreases slightly with increasing… ▽ More Multiferroic composites with the composition (1-x) BaTi0.8Sn0.2O3 - (x) La0.5Ca0.5MnO3 (x =0, 0.3, 0.5, 0.7, 0.9 and 1) were prepared by sol-gel techniques. Rietveld refinements of the composites with 0-3 and 3-0 type connectivities exhibit the formation of pure phases and confirm the fraction of the composite samples. It was found that the composites grain size decreases slightly with increasing the La0.5Ca0.5MnO3 content. Magnetic measurements of the composite ceramics exhibit a gradual increase in saturation and remanent magnetization with increasing La0.5Ca0.5MnO3 content. Dielectric data demonstrate that the composite materials show high values of the dielectric constant in comparison with the parent compound BaTi0.8Sn0.2O3 (BTSO). In addition, an attempt is made to measure the magnetoelectric coupling coefficient and to explain the negative permittivity and losses occurring in these materials at a certain frequency and temperature conditions. △ Less

Submitted 24 November, 2020; originally announced November 2020.

High Energy Storage Efficiency and Large Electrocaloric Effect in Lead-Free BaTi0.89Sn0.11O3 Ceramic

Authors: Soukaina Merselmiz, Zouhair Hanani, Daoud Mezzane, Matjaz Spreitzer, Andraz Bradesko, David Fabijan, Damjan Vengust, Lahoucine Hajji, Zahra Abkhar, Anna Razumnaya, Brigita Rozic, Igor A. Lukyanchuk, Zdravko Kutnjak

Abstract: Lead-free BaTi0.89Sn0.11O3 (BTSn) ceramic was elaborated via a solid-state reaction method and its dielectric, ferroelectric, energy storage, electromechanical as well as electrocaloric properties were investigated at 25 kV/cm. Pure perovskite structure was confirmed by X-ray diffraction analysis. The maximum of the dielectric constant was found to be 17390 at 41 °C. The enhanced total energy dens… ▽ More Lead-free BaTi0.89Sn0.11O3 (BTSn) ceramic was elaborated via a solid-state reaction method and its dielectric, ferroelectric, energy storage, electromechanical as well as electrocaloric properties were investigated at 25 kV/cm. Pure perovskite structure was confirmed by X-ray diffraction analysis. The maximum of the dielectric constant was found to be 17390 at 41 °C. The enhanced total energy density, the recovered energy density, and the energy storage efficiency of 92.7 mJ/cm3, 84.4 mJ/cm3, and 91.04%, respectively, were observed at 60 °C, whereas the highest storage efficiency of 95.87 % was obtained at 100 °C. At room temperature, the electromechanical strain and the large-signal piezoelectric coefficient reached a maximum of 0.07 % and 280 pm/V. The large electrocaloric effect of 0.71 K and the electrocaloric responsivity of 0.28. 10-6 K.mm/kV at 49 °C under 25 kV/cm were indirectly calculated via Maxwell relation from the ferroelectric polarization P (T, E) that was determined from the P-E hysteresis loops. By exploiting the Landau-Ginzburg-Devonshire (LGD) phenomenological theory, the electrocaloric response was estimated to be of 0.61 K at 50 °C under 25 kV/cm. We conclude that BTSn lead-free ceramic is a promising candidate for potential applications in high-efficiency energy storage devices and solid-state refrigeration technology. △ Less

Submitted 16 November, 2020; originally announced November 2020.

Enhanced electrical and electrocaloric properties in lead-free Ba0.8Ca0.2ZrxTi1-xO3 (x = 0 and 0.02) ceramics

Authors: Soukaina Merselmiz, Zouhair Hanani, Said Ben Moumen, Aleksander Matavz, Daoud Mezzane, Nikola Novak, Zahra Abkhar, Lahoucine Hajji, Mbarek Amjoud, Yaovi Gagou, Khalid Hoummada, Dejvid Cresnar, Zdravko Kutnjak, Brigita Rozic

Abstract: The effects of 2% Zr introduction in Ba0.8Ca0.2TiO3 (BCT) system on its electrical and the electrocaloric properties was investigated. The effects of 2% Zr introduction in Ba0.8Ca0.2TiO3 (BCT) system on its electrical and the electrocaloric properties was investigated. △ Less

Submitted 16 November, 2020; originally announced November 2020.

Structural, Dielectric and Ferroelectric Properties of Lead-free BCZT Ceramics Elaborated by Low-temperature Hydrothermal Processing

Authors: Zouhair Hanani, Daoud Mezzane, Mbarek Amjoud, Yaovi Gagou, Khalid Hoummada, Carine Perrin, Anna G. Razumnaya, Zdravko Kutnjak, Adnane Bouzina, Mimoun El Marssi, Mohamed Goune, Brigita Rozic

Abstract: Lead-free Ba0.85Ca0.15Zr0.10Ti0.90O3 (BCZT) ceramics have demonstrated excellent dielectric, ferroelectric and piezoelectric properties in comparison to lead-based materials. The synthesis of pure and crystalline BCZT nanopowders at low temperatures of 25, 80 and 160 C was reported previously by using a sol-gel method followed by a hydrothermal route. In this study, the structural, dielectric and… ▽ More Lead-free Ba0.85Ca0.15Zr0.10Ti0.90O3 (BCZT) ceramics have demonstrated excellent dielectric, ferroelectric and piezoelectric properties in comparison to lead-based materials. The synthesis of pure and crystalline BCZT nanopowders at low temperatures of 25, 80 and 160 C was reported previously by using a sol-gel method followed by a hydrothermal route. In this study, the structural, dielectric and ferroelectric properties of sintered BCZT ceramics at 1250 °C for 10h were investigated. XRD measurements revealed the presence of a single perovskite phase at room temperature with the coexistence of the orthorhombic and tetragonal symmetries. The increase of grain size and the ceramic density in BCZT ceramics result in an enhancement of the dielectric and ferroelectric properties of BCZT ceramics. More interestingly, the synthesis temperature of BCZT powders with high dielectric and ferroelectric properties could be decreased to a low temperature of 160 °C, which is about 1200 °C lower when compared with solid-state reaction and 840 °C lower when compared with sol-gel methods. The BCZT ceramics elaborated at 160 °C revealed excellent electrical properties. Hence, the use of low-temperature hydrothermal processing can be encouraging for the synthesis of lead-free ceramics with high dielectric and ferroelectric properties. △ Less

Submitted 16 November, 2020; originally announced November 2020.

Structural, dielectric, ferroelectric and tuning properties of Pb-free ferroelectric Ba0.9Sr0.1Ti1-xSnxO3

Authors: H. Zaitouni, L. Hajji, D. Mezzane, E. Choukri, Y. Gagou, K. Hoummada, A. Charai, A. Alimoussa, B. Rožič, M. El Marssi, Z. Kutnjak

Abstract: A series of Pb-free ferroelectric materials Ba0.9Sr0.1Ti1-xSnxO3 (BSTS-x) with 0 < x < 0.15 was successfully prepared via solid-state reaction method. The effect of Sn substitution on the crystal structure, microstructure, dielectric behavior, ferroelectric and tunable features of BSTS-x ceramics were systematically investigated. Room temperature (RT) x-ray diffraction (XRD) analysis using the Rie… ▽ More A series of Pb-free ferroelectric materials Ba0.9Sr0.1Ti1-xSnxO3 (BSTS-x) with 0 < x < 0.15 was successfully prepared via solid-state reaction method. The effect of Sn substitution on the crystal structure, microstructure, dielectric behavior, ferroelectric and tunable features of BSTS-x ceramics were systematically investigated. Room temperature (RT) x-ray diffraction (XRD) analysis using the Rietveld refinement method reveals that all the synthesized BSTS-x ceramics were well crystallized into single perovskite structure. The results show a tetragonal phase for 0.00 < x < 0.02, which evolves to orthorhombic and tetragonal coexisting phases for 0.05 < x < 0.07. The composition x = 0.10 showed a mixture of tetragonal, orthorhombic and rhombohedral phases at RT, while a single cubic phase is observed for x = 0.15. The crystal phases determined by XRD were confirmed by Raman spectroscopy. Enhanced dielectric permittivity with a maximum value of ε'~ 35000 is observed for x = 0.10 at RT. The ferroelectric behavior of BSTS-x ceramics was investigated through polarization hysteresis loops and tunability measurements. High tunability of 63% at RT and under the low DC-applied electric field of 1.40 kV/cm is achieved for x = 0.10. △ Less

Submitted 13 November, 2020; originally announced November 2020.

Electrocaloric response in Lanthanum-modified lead zirconate titanate ceramics

Authors: B. Asbani, M. El Marssi, J. -L. Dellis, A. Lahmar, Y. Gagou, D. Mezzane, M. Amjoud, A. Alimoussa, Z. Kutnjak, R. Pirc, B. Rožič

Abstract: Recent findings of a large electrocaloric (EC) effect in polymeric and inorganic ferroelectric materials open a potential possibility of development of solid-state cooling or heating devices of new generation with better energy efficiency that may be less harmful for the environment. We investigate by using direct measurements, the temperature and electric field dependence of the electrocaloric re… ▽ More Recent findings of a large electrocaloric (EC) effect in polymeric and inorganic ferroelectric materials open a potential possibility of development of solid-state cooling or heating devices of new generation with better energy efficiency that may be less harmful for the environment. We investigate by using direct measurements, the temperature and electric field dependence of the electrocaloric response in Pb1-xLax(ZryTi1-y)1-x/4O3 bulk ceramics (PLZT) with x=0.06 and 0.12. Here, the properties of the EC response were probed in a part of the PLZT composition phase diagram with low y=0.40 composition, in which the EC effect was not previously studied. Measurement results show the existence of the sizeable EC response in 12/40/60 PLZT sample with the EC temperature change (ΔTEC) of 2.92 K at 430 K and 80 kV/cm. This value exceeds previously obtained ΔTEC values in relaxor ferroelectric x/65/35 PLZT compositions and rivaling the best EC response in lead magnesium niobate-lead titanate ceramics. The electrocaloric responsivity (ΔT/ΔE) value of 0.41x10-6 Km/V determined at a lower electric field of 20 kV/cm and 410 K is comparable to those observed in other perovskite ferroelectrics. △ Less

Submitted 9 June, 2020; originally announced June 2020.

Journal ref: J. Appl. Phys. 127, 224101 (2020)

Pretransitional effects of the isotropic liquid-plastic crystal transition

Authors: A. Drozd-Rzoska, S. Starzonek, S. J. Rzoska, J. Łoś, Z. Kutnjak, S. Kralj

Abstract: We report on strong pretransitional effects across the isotropic liquid-plastic crystal melting temperature in linear and nonlinear dielectric response. Studies were carried out for cyclooctanol (C8H16O) in the unprecedented range of temperatures 120 K < T < 345 K. Such pretransitional effects have not yet been reported in any plastic crystals. Results include the discovery of the experimental man… ▽ More We report on strong pretransitional effects across the isotropic liquid-plastic crystal melting temperature in linear and nonlinear dielectric response. Studies were carried out for cyclooctanol (C8H16O) in the unprecedented range of temperatures 120 K < T < 345 K. Such pretransitional effects have not yet been reported in any plastic crystals. Results include the discovery of the experimental manifestation of the Mossotti Catastrophe behavior, so far considered only as a hypothetical paradox. The model interpretations of experimental findings are proposed. We parallel the observed pretransitional behavior with the one observed in octyloxycyanobiphenyl (8OCB), typical liquid crystal (LC), displaying a reversed sequence of phase transitions in orientational and translational degrees of order on varying temperature. Furthermore, in its nematic phase, we demonstrate first-ever observed temperature-driven crossover between regions dominated by isotropic liquid and smectic A pretransitional fluctuations. We propose a pioneering minimal model describing plastic crystal phase behavior where we mimic derivation of classical Landau-de Gennes-Ginzburg modelling of Isotropic - Nematic - Smectic A LC phase behavior. △ Less

Submitted 9 December, 2019; originally announced December 2019.

Synthesis of La0.5Ca0.5-x xMnO3 nanocrystalline manganites by sucrose assisted auto combustion route and study of their structural, magnetic and magnetocaloric properties

Authors: S. Ben Moumen, Y. Gagou, M. Chettab, D. Mezzane, M. Amjoud, S. Fourcade, L. Hajji, Z. Kutnjak, M. El Marssi, Y. El Amraoui, Y. Kopelevich, Igor A. Lukyanchuk

Abstract: Perovskite manganite La0.5Ca0.5-x xMnO3 (LCMO) nanomaterials were elaborated using the sucrose modified auto combustion method. Rietveld refinements of the X-ray diffraction patterns of the crystalline structure confirm a single-phase orthorhombic state with Pbnm space group (No. 62). The Ca-vacancies were voluntarily created in the LCMO structure in order to study their influence on the magnetic… ▽ More Perovskite manganite La0.5Ca0.5-x xMnO3 (LCMO) nanomaterials were elaborated using the sucrose modified auto combustion method. Rietveld refinements of the X-ray diffraction patterns of the crystalline structure confirm a single-phase orthorhombic state with Pbnm space group (No. 62). The Ca-vacancies were voluntarily created in the LCMO structure in order to study their influence on the magnetic behaviour in the system. The magnetic susceptibility was found to be highly enhanced in the sample with Ca-vacancies. Paramagnetic-to-ferromagnetic phase transition was evidenced in both samples around 254 K. This transition is, characterized by a drastic jump of the susceptibility in the sample with Ca-vacancies. The maximum of entropy change, observed for both compounds at magnetic field of 6T was 2.30 J kg-1K-1 and 2.70 J kg-1K-1 for the parent compound and the lacunar one respectively. The magnetocaloric adiabatic temperature change value calculated by indirect method was 5.6 K and 5.2 K for the non-lacunar and Ca-vacancy compound, respectively. The Ca-lacunar La0.5Ca0.5-x xMnO3 (x=0.05) reported in this work demonstrated overall enhancement of the magnetocaloric effect over the LCMO. The technique used to elaborate LCMO materials was beneficial to enhance the magnetocaloric effect and magnetic behaviour. Therefore, we conclude that this less costly environmentally friendly system can be considered as more advantageous candidate for magnetic refrigeration applications then the commonly Gd-based compounds. △ Less

Submitted 27 October, 2019; originally announced October 2019.

Comments: 12 pages,11 figures, Article

Structural, dielectric and electrocaloric properties of (Ba0.85Ca0.15)(Ti0.9Zr0.1-xSnx)O3 ceramics elaborated by sol-gel method

Authors: Saad Belkhadir, Aziz Neqali, Mbarek Amjoud, Daoud Mezzane, Abdelhadi Alimoussa, Elhassan Choukri, Yaovi Gagou, Igor Raevski, Mimoun ElMarssi, Igor Lukyanchuk, Brigita Rozic, Zdravko Kutnjak

Abstract: Ferroelectric ceramics (Ba0.85Ca0.15)(Ti0.9Zr0.1-xSnx)O3 (x=0.00, 0.02, 0.04, 0.06) were prepared by a sol-gel method. Structural investigation revealed the co-existence of tetragonal (P4mm) and orthorhombic (Pmm2) symmetries at room temperature for the undoped ceramic, while only a tetragonal structure (P4mm) was observed for the doped ceramics. Dielectric measurements indicate a dielectric relax… ▽ More Ferroelectric ceramics (Ba0.85Ca0.15)(Ti0.9Zr0.1-xSnx)O3 (x=0.00, 0.02, 0.04, 0.06) were prepared by a sol-gel method. Structural investigation revealed the co-existence of tetragonal (P4mm) and orthorhombic (Pmm2) symmetries at room temperature for the undoped ceramic, while only a tetragonal structure (P4mm) was observed for the doped ceramics. Dielectric measurements indicate a dielectric relaxation process at high temperatures which is essentially related to the hopping of oxygen vacancies. Furthermore, a down shifting of the Curie temperature (TC) with increasing Sn4+ doping rate has been revealed. The temperature profiles of the Raman spectra unveiled the existence of polar nanoregions (PNRs) above the Curie temperature in all ceramics. The ferroelectric properties were found to be related to the microstructure. Electrocaloric effect was investigated in this system that revealed an electrocaloric responsivity of 0.225 10-6 K m/V for the composition with x = 0.04 Sn doping, where other remarkable physical properties were also observed. △ Less

Submitted 7 October, 2019; originally announced October 2019.

Journal ref: J Mater Sci: Mater Electron (2019) 30: 14099. https://doi.org/10.1007/s10854-019-01776-1

Structural, dielectric and magnetic properties of multiferroic (1-x) La0.5Ca0.5MnO3-(x) BaTi0.8Sn0.2O3 laminated composites

Authors: S. Ben Moumen, Y. Gagou, S. Belkhadir, D. Mezzane, M. Amjoud, B. Rozic, L. Hajji, Z. Kutnjak, Z. Jaglicic, M. Jagodic, M. El Marssi, Y. Kopelevich, Igor A. Luk yanchuk

Abstract: High performance lead-free multiferroic composites are desired to replace the lead-based ceramics in multifunctional devices applications. Laminated compounds were prepared from ferroelectric and ferromagnetic materials. In this work, we present laminated ceramics compound by considering the ferromagnetic La0.5Ca0.5MnO3 (LCMO) and the ferroelectric BaTi0.8Sn0.2O3 (BTSO) in two different proportion… ▽ More High performance lead-free multiferroic composites are desired to replace the lead-based ceramics in multifunctional devices applications. Laminated compounds were prepared from ferroelectric and ferromagnetic materials. In this work, we present laminated ceramics compound by considering the ferromagnetic La0.5Ca0.5MnO3 (LCMO) and the ferroelectric BaTi0.8Sn0.2O3 (BTSO) in two different proportions. Compounds (1-x) LCMO-(x) BTSO with x=1 and 0 (pure materials) were synthesized by the sol gel method and x=0.7 and 0.5 (laminated) compounds were elaborated by welding appropriate mass ratios of each pure material by using the silver paste technique. Structural, dielectric, ferroelectric, microstructure and magnetic characterization were conducted on these samples. X-ray scattering results showed pure perovskite phases confirming the successful formation of both LCMO and BTSO. SEM images evidenced the laminated structure and good quality of the interfaces. The laminated composite materials have demonstrated a multiferroic behavior characterized by the ferroelectric and the ferromagnetic hysteresis loops. Furthermore, the enhancement of the dielectric constant in the laminated composite samples is mainly attributed to the Maxwell-Wagner polarization. △ Less

Submitted 3 October, 2019; originally announced October 2019.

Direct electrocaloric, structural, dielectric, and electric properties of lead-free ferroelectric material Ba0.9Sr0.1Ti1-xSnxO3 synthesized by semi-wet method

Authors: Hajar Zaitouni, Lahoucine Hajji, Daoud Mezzane, Elhassan Choukri, Abdelhadi Alimoussa, Said Ben Moumen, Brigita Rožič, Mimoun El Marssi, Zdravko Kutnjak

Abstract: By using the semi-wet synthesis method, lead-free ferroelectric materials Ba0.9Sr0.1Ti1-xSnxO3 with x = 0, 0.02, 0.05, and 0.10 (abbreviated as BSTS) were prepared and their structural, electric and electrocaloric properties were investigated. The X-ray diffraction (XRD) patterns show that the samples calcined at 950°C have well crystallized into perovskite structure suggesting the substitution of… ▽ More By using the semi-wet synthesis method, lead-free ferroelectric materials Ba0.9Sr0.1Ti1-xSnxO3 with x = 0, 0.02, 0.05, and 0.10 (abbreviated as BSTS) were prepared and their structural, electric and electrocaloric properties were investigated. The X-ray diffraction (XRD) patterns show that the samples calcined at 950°C have well crystallized into perovskite structure suggesting the substitution of Ti4+ by Sn4+ in BST lattice. With increasing content of Sn, the enhancement of the dielectric permittivity was observed for (0<x<0.05) and the ferroelectric transition temperature (TC) was found to shift towards the room temperature (TC = 20°C for x = 0.10). Direct measurements of the electrocaloric effect (ECE) were performed on all samples by using the highresolution calorimeter. It is found that Ba0.9Sr0.1Ti0.95Sn0.05O3 exhibits a high ECE temperature change of DTEC = 0.188 K at an applied electric field of only 7 kV/cm. Impedance spectrum analysis of all the samples performed in the temperature range of 300-360°C reveals the existence of two relaxation contributions related to the grain and grain boundaries that are well separated in frequency. Activation energies of conduction and relaxation processes were deduced for both contributions in order to determine the conduction mechanism of the studied compositions. △ Less

Submitted 20 May, 2019; originally announced May 2019.

A multicaloric material as a link between electrocaloric and magnetocaloric refrigeration

Authors: Hana Ursic, Vid Bobnar, Barbara Malic, Cene Filipic, Marko Vrabelj, Silvo Drnovsek, Younghun Jo, Magdalena Wencka, Zdravko Kutnjak

Abstract: The existence and feasibility of the multicaloric, polycrystalline material 0.8Pb(Fe1/2Nb1/2)O3-0.2Pb(Mg1/2W1/2)O3, exhibiting magnetocaloric and electrocaloric properties, are demonstrated. Both the electrocaloric and magnetocaloric effects are observed over a broad temperature range below room temperature. The maximum magnetocaloric temperature change of ~0.26 K is obtained with a magnetic-field… ▽ More The existence and feasibility of the multicaloric, polycrystalline material 0.8Pb(Fe1/2Nb1/2)O3-0.2Pb(Mg1/2W1/2)O3, exhibiting magnetocaloric and electrocaloric properties, are demonstrated. Both the electrocaloric and magnetocaloric effects are observed over a broad temperature range below room temperature. The maximum magnetocaloric temperature change of ~0.26 K is obtained with a magnetic-field amplitude of 70 kOe at a temperature of 5 K, while the maximum electrocaloric temperature change of ~0.25 K is obtained with an electric-field amplitude of 60 kV/cm at a temperature of 180 K. The material allows a multicaloric cooling mode or a separate caloric-modes operation depending on the origin of the external field and the temperature at which the field is applied. △ Less

Submitted 25 May, 2016; originally announced May 2016.

Electrocaloric effect in Ba(0.2)Ca(0.8)Ti(0.95)Ge(0.05)O(3) determined by a new pyroelectric method

Authors: B. Asbani, J. -L. Dellis, Y. Gagou, H. Kaddoussi, A. Lahmar, M. Amjoud, D. Mezzane, Z. Kutnjak, M. El Marssi

Abstract: The present letter explores the electrocaloric effect (ECE) in the lead free oxide Ba0.8Ca0.2Ti0.95Ge0.05O3 ceramics (BCTG). The electrocaloric responsivity (dT/dE) was determined by two different methods using the Maxwell relationship (dT/dE)~(dP/dT)_E. In a first well-known indirect method, P-E hysteresis loops were measured in a wide temperature range from which the pyroelectric coefficient p_E… ▽ More The present letter explores the electrocaloric effect (ECE) in the lead free oxide Ba0.8Ca0.2Ti0.95Ge0.05O3 ceramics (BCTG). The electrocaloric responsivity (dT/dE) was determined by two different methods using the Maxwell relationship (dT/dE)~(dP/dT)_E. In a first well-known indirect method, P-E hysteresis loops were measured in a wide temperature range from which the pyroelectric coefficient p_E=(dP/dT)_E and thus (dT/dE) were determined by derivation of P(T,E) data. In the second novel method the pyroelectric coefficient p_E and consequently the electrocaloric responsivity was determined by direct measurements of the pyroelectric currents under different applied electric fields. Within the experimental error good agreement was obtained between two methods with an electrocaloric responsivity equal to 0.18 +/- 0.05 10-6 K.m.V-1 was obtained at about 410 K △ Less

Submitted 28 July, 2015; originally announced July 2015.

Comments: 5 pages, 4 figures

Multiferroicity in the geometrically frustrated FeTe2O5Cl

Authors: M. Pregelj, A. Zorko, O. Zaharko, P. Jeglič, Z. Kutnjak, Z. Jagličić, S. Jazbec, H. Luetkens, A. D. Hillier, H. Berger, D. Arčon

Abstract: The layered FeTe2O5Cl compound was studied by specific-heat, muon spin relaxation, nuclear magnetic resonance, dielectric, as well as neutron and synchrotron x-ray diffraction measurements, and the results were compared to isostructural FeTe2O5Br. We find that the low-temperature ordered state, similarly as in FeTe2O5Br, is multiferroic - the elliptical amplitude-modulated magnetic cycloid and the… ▽ More The layered FeTe2O5Cl compound was studied by specific-heat, muon spin relaxation, nuclear magnetic resonance, dielectric, as well as neutron and synchrotron x-ray diffraction measurements, and the results were compared to isostructural FeTe2O5Br. We find that the low-temperature ordered state, similarly as in FeTe2O5Br, is multiferroic - the elliptical amplitude-modulated magnetic cycloid and the electric polarization simultaneously develop below 11 K. However, compared to FeTe2O5Br, the magnetic elliptical envelop rotates by 75(4) deg and the orientation of the electric polarization is much more sensitive to the applied electric field. We propose that the observed differences between the two isostructural compounds arise from geometric frustration, which enhances the effects of otherwise subtle Fe3+ (S = 5/2) magnetic anisotropies. Finally, x-ray diffraction results imply that, on the microscopic scale, the magnetoelectric coupling is driven by shifts of the O1 atoms, as a response to the polarization of the Te4+ lone-pair electrons involved in the Fe-O-Te-O-Fe exchange bridges. △ Less

Submitted 30 December, 2013; v1 submitted 9 October, 2013; originally announced October 2013.

Comments: 10 pages, 10 figures. (http://link.aps.org/doi/10.1103/PhysRevB.88.224421)

Journal ref: Physical Review B 88, 224421 (2013)

Compressible spherical dipolar glass model of relaxor ferroelectrics

Authors: R. Pirc, Z. Kutnjak, N. Novak

Abstract: The interactions between the dielectric polarization and the fluctuations of the strain (stress) tensor in relaxor ferroelectrics are shown to give rise to the anisotropy of the anharmonic P4-term in the Landau-type free energy, however, the harmonic P2-term is still properly described by the rigid spherical random bond--random field model. These are the essential features of the compressible sphe… ▽ More The interactions between the dielectric polarization and the fluctuations of the strain (stress) tensor in relaxor ferroelectrics are shown to give rise to the anisotropy of the anharmonic P4-term in the Landau-type free energy, however, the harmonic P2-term is still properly described by the rigid spherical random bond--random field model. These are the essential features of the compressible spherical dipolar glass model, which is used to calculate the singularities of the specific heat near field-induced critical points. The results agree with recent high-resolution calorimetric experiments in PMN [110]. △ Less

Submitted 24 October, 2012; originally announced October 2012.

Comments: 5 pdf pages, 4 figures

Electrocaloric effect in relaxor ferroelectrics

Authors: R. Pirc, Z. Kutnjak, R. Blinc, Q. M. Zhang

Abstract: The electrocaloric effect (ECE) in normal and relaxor ferroelectrics is investigated in the framework of a thermodynamic approach based on the Maxwell relation and a Landau-type free energy model. The static dielectric response of relaxors is described by the spherical random bond--random field model, yielding the first Landau coefficient a=a(T), which differs from the usual expression for ferroel… ▽ More The electrocaloric effect (ECE) in normal and relaxor ferroelectrics is investigated in the framework of a thermodynamic approach based on the Maxwell relation and a Landau-type free energy model. The static dielectric response of relaxors is described by the spherical random bond--random field model, yielding the first Landau coefficient a=a(T), which differs from the usual expression for ferroelectrics. The fourth-order coefficient b is treated as a phenomenological parameter, which is either positive or negative due to the anisotropy of the stress-mediated coupling between the polar nanoregions. When b<0, the maximum ECE in a relaxor is predicted near the critical point in the temperature-field phase diagram, whereas in a ferroelectric it occurs at the first order phase transition. The theoretical upper bound on the ECE temperature change is estimated from the values of saturated polarization, effective Curie constant, and specific heat of the material. △ Less

Submitted 14 October, 2010; originally announced October 2010.

Comments: 20 pages, 4 figures

Magnetic phase diagram of the multiferroic FeTe$_2$O$_5$Br

Authors: M. Pregelj, A. Zorko, O. Zaharko, Z. Kutnjak, M. Jagodič, Z. Jagličić, H. Berger, M. de Souza, C. Balz, M. Lang, D. Arčon

Abstract: The low-temperature magnetic phase diagram of the multiferroic system FeTe$_2$O$_5$Br down to 300 mK and up to 9 T is presented. Short-range magnetic correlations within the crystal layers start to develop already at $\sim$50 K, i.e., far above $T_{N1} \sim$ 11.0 K, where the system undergoes a magnetic phase transition into the high-temperature incommensurate (HT-ICM) phase. Only 0.5 K lower, at… ▽ More The low-temperature magnetic phase diagram of the multiferroic system FeTe$_2$O$_5$Br down to 300 mK and up to 9 T is presented. Short-range magnetic correlations within the crystal layers start to develop already at $\sim$50 K, i.e., far above $T_{N1} \sim$ 11.0 K, where the system undergoes a magnetic phase transition into the high-temperature incommensurate (HT-ICM) phase. Only 0.5 K lower, at $T_{N2}$, the system undergoes a second phase transition into the low-temperature incommensurate amplitude-modulated (LT-ICM) phase accompanied by a spontaneous electric polarization. When the magnetic field is applied, the transition temperatures shift depending on the field orientation. In the case of $B||b$ and $B >$ 4.5 T, the HT-ICM phase disappears along with the electric polarization in the LT-ICM phase. The field dependence of the magnetic transition temperatures is explained in the context of the magnetic susceptibility behavior. Similarities and differences between the novel amplitude-modulated and well-established helicoidal magnetoelectrics are discussed. △ Less

Submitted 20 August, 2010; originally announced August 2010.

High-Temperature Dielectric Response of (1-x)Pb(Mg1/3Nb2/3)O3-xPbTiO3: Does Burns Temperature Exist in Ferroelectric Relaxors?

Authors: Vid Bobnar, Cene Filipic, Adrijan Levstik, Zdravko Kutnjak

Abstract: It has been considered that polar nanoregions in relaxors form at Burns temperature Td approx 600 K. High-temperature dielectric investigations of Pb(Mg1/3Nb2/3)O3 (PMN) and 0.7PMN-0.3PbTiO3 reveal, however, that the dielectric dispersion around 600 K appears due to the surface-layer contributions. The intrinsic response, analyzed in terms of the universal scaling, imply much higher Td or format… ▽ More It has been considered that polar nanoregions in relaxors form at Burns temperature Td approx 600 K. High-temperature dielectric investigations of Pb(Mg1/3Nb2/3)O3 (PMN) and 0.7PMN-0.3PbTiO3 reveal, however, that the dielectric dispersion around 600 K appears due to the surface-layer contributions. The intrinsic response, analyzed in terms of the universal scaling, imply much higher Td or formation of polar nanoregions in a broad temperature range, while high dielectric constants manifest that polar order exists already at the highest measured temperatures of 800 K. The obtained critical exponents indicate critical behavior associated with universality classes typically found in spin glasses. △ Less

Submitted 10 February, 2010; originally announced February 2010.

Spin amplitude modulation driven magnetoelectic coupling in the new multiferroic FeTe$_2$O$_5$Br

Authors: M. Pregelj, O. Zaharko, A. Zorko, Z. Kutnjak, P. Jeglic, P. J. Brown, M. Jagodic, Z. Jaglicic, H. Berger, D. Arcon

Abstract: Magnetic and ferroelectric properties of layered geometrically frustrated cluster compound FeTe$_2$O$_5$Br were investigated with single-crystal neutron diffraction and dielectric measurements. Incommensurate amplitude modulated magnetic order with the wave vector $\bf{q}$=($\half$, 0.463, 0) develops below $T_N=10.6(2) {\rm K}$. Simultaneously, a ferroelectric order with the spontaneous polariz… ▽ More Magnetic and ferroelectric properties of layered geometrically frustrated cluster compound FeTe$_2$O$_5$Br were investigated with single-crystal neutron diffraction and dielectric measurements. Incommensurate amplitude modulated magnetic order with the wave vector $\bf{q}$=($\half$, 0.463, 0) develops below $T_N=10.6(2) {\rm K}$. Simultaneously, a ferroelectric order with the spontaneous polarization perpendicular to ${\bf q}$ and to Fe$^{3+}$ magnetic moments emerges. The observed ferroelectricity and extraordinary linear scaling of the ferroelectric and magnetic order parameter are provoked by the striction of the intercluster Fe-O-Te-O-Fe bridges leading to the shift of Te$^{4+}$ ions and polarization of their lone-pair electrons. △ Less

Submitted 1 October, 2009; v1 submitted 12 June, 2009; originally announced June 2009.

Journal ref: Physical Review Letters 103, 147202 (2009)