-
Probing Elastic Isotropy in Entropy Stabilized Transition Metal Oxides: Experimental Estimation of Single Crystal Elastic Constants from Polycrystalline Materials
Authors:
Lalith Kumar Bhaskar,
Niraja Moharana,
Hendrik Holz,
Rajaprakash Ramachandramoorthy,
K. C. Hari Kumar,
Ravi Kumar
Abstract:
Single Crystal Elastic Constants (SECs) are pivotal for understanding material deformation, validating interatomic potentials, and enabling crucial material simulations. The entropy stabilized oxide showcases intriguing properties, underscoring the necessity for the determination of precise SECs to establish reliable interatomic potential and unlock its full potential using simulations. This study…
▽ More
Single Crystal Elastic Constants (SECs) are pivotal for understanding material deformation, validating interatomic potentials, and enabling crucial material simulations. The entropy stabilized oxide showcases intriguing properties, underscoring the necessity for the determination of precise SECs to establish reliable interatomic potential and unlock its full potential using simulations. This study presents an innovative methodology for estimating SECs from polycrystalline materials, requiring only two diffraction elastic constants and isotropic elastic constants for crystals with cubic symmetry. Validation using phase-pure nickel demonstrated good agreement with existing literature values, with a maximum 11.5% deviation for $C_{12}$ values. Extending the methodology to [(MgNiCoCuZn)O], SECs were calculated: 219 GPa for $C_{11}$, 116 GPa for $C_{12}$, and 51 GPa for $C_{44}$. Comparison with literature-reported values from DFT calculations revealed a significant divergence, ranging from 25% to 59% in the bulk and shear modulus calculated using the Voigt-Reuss-Hill average. To comprehend this disparity, we conducted DFT calculations and thoroughly examined the factors influencing these values. This study not only introduces a straightforward and dependable SEC estimation methodology but also provides precise experimental SEC values for [(MgNiCoCuZn)O] entropy stabilized oxides at ambient conditions, crucial for developing accurate interatomic potentials in future research.
△ Less
Submitted 20 September, 2024;
originally announced September 2024.
-
Diffusion Monte Carlo Study on Relative Stabilities of Boron Nitride Polymorphs
Authors:
Yutaka Nikaido,
Tom Ichibha,
Kenta Hongo,
Fernando A. Reboredo,
K. C. Hari Kumar,
Priya Mahadevan,
Ryo Maezono,
Kousuke Nakano
Abstract:
Although Boron nitride (BN) is a well-known compound widely used for engineering and scientific purposes, the phase stability of its polymorphs, one of its most fundamental properties, is still under debate. The ab initio determination of the ground state of the BN polymorphs, such as hexagonal and zinc-blende, is difficult because of the elusive Van der Waals interaction, which plays a decisive r…
▽ More
Although Boron nitride (BN) is a well-known compound widely used for engineering and scientific purposes, the phase stability of its polymorphs, one of its most fundamental properties, is still under debate. The ab initio determination of the ground state of the BN polymorphs, such as hexagonal and zinc-blende, is difficult because of the elusive Van der Waals interaction, which plays a decisive role in some of the polymorphs, making quantitative prediction highly challenging. Hence, despite multiple theoretical studies, there has been no consensus on the ground state yet, primarily due to contradicting reports. In this study, we apply a state-of-the-art ab initio framework - fixed-node diffusion Monte Carlo (FNDMC), to four well known BN polymorphs, namely hexagonal, rhombohedral, wurtzite, and zinc-blende BNs. Our FNDMC calculations show that hBN is thermodynamically the most stable among the four polymorphs at 0 K as well as at 300K. This result agrees with the experimental data of Corrigan~{\it et al.} and Fukunaga. The conclusions are consistent with those obtained using other high-level methods, such as coupled cluster. We demonstrate that the FNDMC is a powerful method to address polymorphs that exhibit bonds of various forms. It also provides valuable information, like reliable reference energies, when reliable experimental data are missing or difficult to access. Our findings should promote the application of FNDMC for other van der Waals materials.
△ Less
Submitted 24 November, 2021;
originally announced November 2021.
-
A novel experimental method of estimating tracer and intrinsic diffusion coefficients from multicomponent diffusion profiles
Authors:
Neelamegan Esakkiraja,
Anuj Dash,
Avik Mondal,
K. C. Hari Kumar,
Aloke Paul
Abstract:
A few decades earlier, Kirkaldy and Lane proposed an indirect method of estimating the tracer and intrinsic diffusion coefficients in a ternary system (without showing experimental verification), which is otherwise impossible following the Kirkendall marker experiments. Subsequently, Manning proposed the relations between the tracer and intrinsic diffusion coefficients in the multicomponent system…
▽ More
A few decades earlier, Kirkaldy and Lane proposed an indirect method of estimating the tracer and intrinsic diffusion coefficients in a ternary system (without showing experimental verification), which is otherwise impossible following the Kirkendall marker experiments. Subsequently, Manning proposed the relations between the tracer and intrinsic diffusion coefficients in the multicomponent system by extending the Onsager formalism (although could not be estimated by intersecting the diffusion couples). By solving these issues in this article, we have now proposed the equations and method for estimating these parameters in pseudo-ternary diffusion couples in which diffusion paths can be intersected in multicomponent space. We have chosen NiCoFeCr system for verification of this method because of the availability of good quality diffusion couple experiments and estimated tracer diffusion coefficients of all the components measured by the radiotracer method. An excellent match is found when the tracer diffusion coefficients estimated following the newly proposed method are compared with the data estimated following the radiotracer method. Following, the intrinsic diffusion coefficients are estimated experimentally in a multicomponent system for the first time highlighting diffusional interactions between the components. We have further shown that the intrinsic diffusion coefficients are the same (if the vacancy wind effect is negligible/neglected) when estimated from other types of diffusion couples (pseudo-binary and body diagonal) in the same multi-component system. This method can be now extended to the Al, Ga, Si containing systems in which the estimation of tracer diffusion coefficients following the radiotracer method is difficult/impossible because of various reasons.
△ Less
Submitted 10 September, 2020;
originally announced September 2020.
-
Composition dependence of tracer diffusion coefficients in Fe-Ga alloys: a case study by a tracer-interdiffusion couple method
Authors:
G. M. Muralikrishna,
B. Tas,
N. Esakkiraja,
V. Esin,
K. C. Hari Kumar,
I. S. Golovin,
I. V. Belova,
G. E. Murch,
A. Paul,
S. V. Divinski
Abstract:
The problem of estimation of the tracer diffusion coefficients is solved by utilizing a novel tracer-interdiffusion couple technique even in the absence suitable radioisotope of one of the components and absence of reliable thermodynamic parameters. This is demonstrated by generating reliable and reproducible mobility data in the alloys of the Fe-Ga system with a strong composition dependence of t…
▽ More
The problem of estimation of the tracer diffusion coefficients is solved by utilizing a novel tracer-interdiffusion couple technique even in the absence suitable radioisotope of one of the components and absence of reliable thermodynamic parameters. This is demonstrated by generating reliable and reproducible mobility data in the alloys of the Fe-Ga system with a strong composition dependence of the diffusion coefficients. Tracer- (59Fe) and inter-diffusion are simultaneously measured in three couples Fe/Fe-16Ga, Fe/Fe-24Ga and Fe-16Ga/Fe-24Ga at 1143 K. The results obtained for the couples with different end-members are in an excellent agreement with each other for the overlapping composition intervals. The influence of the molar volume on the measured tracer- (59Fe) and inter-diffusion coefficients is evaluated. Using thermodynamic calculations, the Ga tracer diffusion coefficient and the vacancy wind factor are determined via the Darken-Manning relation for the composition range of 0-24 at.% Ga. The results confirm the reliability of the tracer-interdiffusion couple technique for producing highly accurate diffusion data, in the present case for optimizing the mobility description of the bcc phase of the Fe-Ga system. The Ga tracer diffusion coefficients are further estimated via experimental determination of the ratio of the Fe and Ga tracer diffusivities at the Kirkendall marker planes and utilizing the Fe tracer diffusion coefficients measured directly by the radiotracer method.
△ Less
Submitted 28 August, 2020;
originally announced August 2020.
-
Grain boundary diffusion and grain boundary structures of a Ni-Cr-Fe-alloy: Evidences for grain boundary phase transformations
Authors:
Sai Rajeshwari K,
S. Sankaran,
K. C. Hari Kumar,
Harald Rösner,
Vladimir A. Esin,
Sergiy Divinski,
Gerhard Wilde
Abstract:
Grain boundary tracer diffusion of Ni, Fe and Cr was studied in a Ni-base 602CA coarse-grained alloy. A co-existence of several short-circuit contributions was distinguished at higher temperatures in Harrison's B-type regime (773-873 K), which were related to different families of high-angle grain boundaries with distinct coverages by precipitates and segregation levels as revealed by HAADF-STEM c…
▽ More
Grain boundary tracer diffusion of Ni, Fe and Cr was studied in a Ni-base 602CA coarse-grained alloy. A co-existence of several short-circuit contributions was distinguished at higher temperatures in Harrison's B-type regime (773-873 K), which were related to different families of high-angle grain boundaries with distinct coverages by precipitates and segregation levels as revealed by HAADF-STEM combined with EDX measurements. Annealing at 873 K for 18 hours resulted in Cr23C6-type carbides coexisting with an α-Cr-Mn-enriched phase in addition to sequential segregation layers of Al, Fe and Ni around them. Curved and hackly grain boundaries showed a high density of plate-like carbides, whereas straight grain boundaries were composed of globular carbides with similar chemical composition variations and additionally with alternating layers of Cr and Ni in between the carbides, similar to microstructures after a spinodal decomposition. At lower temperatures, discontinuous interfaces with Cr and Cr-carbide enrichment dominated and the alloy annealed at 403 K for 72 hours contained plate-like Cr23C6-type carbides surrounded by a Ni-rich layer around them. The Ni grain boundary diffusion rates at these relatively low temperatures (formally belonging to C-type kinetics) showed an anomalous character being almost temperature independent. This specific diffusion behaviour was explained by a concomitant relaxation of transformation-induced elastic strains occurring on a longer time scale with respect to grain boundary diffusion. Thermodynamic insights into the probable mechanism of decomposition at grain boundaries are provided.
△ Less
Submitted 19 December, 2019;
originally announced December 2019.
-
${\it Ab\ initio}$ thermodynamic properties of certain compounds in Nd-Fe-B system
Authors:
Adie Tri Hanindriyo,
Soumya Sridar,
K. C. Hari Kumar,
Kenta Hongo,
Ryo Maezono
Abstract:
In this work, we report the results of \emph{ab initio} calculations of thermochemical properties of several compounds in the Fe-Nd, B-Nd and B-Fe-Nd systems. We have performed DFT+U calculations to compute the enthalpy of formation of the compounds NdB$_6$, NdB$_4$, Nd$_2$B$_5$, Nd$_2$Fe$_{17}$ and Nd$_5$Fe$_2$B$_6$. It was found that the values obtained with an effective Hubbard $U$ correction h…
▽ More
In this work, we report the results of \emph{ab initio} calculations of thermochemical properties of several compounds in the Fe-Nd, B-Nd and B-Fe-Nd systems. We have performed DFT+U calculations to compute the enthalpy of formation of the compounds NdB$_6$, NdB$_4$, Nd$_2$B$_5$, Nd$_2$Fe$_{17}$ and Nd$_5$Fe$_2$B$_6$. It was found that the values obtained with an effective Hubbard $U$ correction have better agreement with the experimental data. We have also computed the vibrational contribution to the heat capacity ($C_p$) of the compounds as a function of temperature was computed using the quasharmonic approximation. For most of the compounds these properties have not been experimentally determined until now. Hence, the computed \emph{ab initio} thermodynamic properties will serve as useful input for the Gibbs energy model parameter assessment using the CALPHAD method.
△ Less
Submitted 20 August, 2020; v1 submitted 16 November, 2018;
originally announced November 2018.
