-
Engineering Three-Dimensional (3D) Out-of-Plane Graphene Edge Sites for Highly-Selective Two-Electron Oxygen Reduction Electrocatalysis
Authors:
Daniel San Roman,
Dilip Krishnamurthy,
Raghav Garg,
Hasnain Hafiz,
Noel Nuhfer,
Venkatasubramanian Viswanathan,
Tzahi Cohen-Karni
Abstract:
Selective two-electron oxygen reduction reaction (ORR) offers a promising route for hydrogen peroxide synthesis, and defective sp2 carbon-based materials are attractive, low-cost electrocatalysts for this process. However, due to a wide range of possible defect structures formed during material synthesis, identification and fabrication of precise active sites remain a challenge. Here, we report a…
▽ More
Selective two-electron oxygen reduction reaction (ORR) offers a promising route for hydrogen peroxide synthesis, and defective sp2 carbon-based materials are attractive, low-cost electrocatalysts for this process. However, due to a wide range of possible defect structures formed during material synthesis, identification and fabrication of precise active sites remain a challenge. Here, we report a graphene edgebased electrocatalyst for two-electron ORR - nanowire-templated three-dimensional fuzzy graphene (NT3DFG). NT-3DFG exhibits excellent efficiency (onset potential of 0.79 $\pm$ 0.01 V versus RHE), selectivity (93 $\pm$ 3 % H2O2), and tunable ORR activity as a function of graphene edge site density. Using spectroscopic surface characterization and density functional theory calculations, we find that NT-3DFG edge sites are readily functionalized by carbonyl (C=O) and hydroxyl (C-OH) groups under alkaline ORR conditions. Our calculations indicate that multiple site configurations at both armchair and zigzag edges may achieve a local coordination environment that allows selective, two-electron ORR. We derive a general geometric descriptor based on the local coordination environment that provides activity predictions of graphene surface sites within ~0.1 V of computed values. Herein we combine synthesis, spectroscopy, and simulations to improve active site characterization and accelerate carbon-based electrocatalyst discovery.
△ Less
Submitted 19 September, 2019; v1 submitted 9 April, 2019;
originally announced April 2019.
-
Quantifying Confidence in DFT Predicted Surface Pourbaix Diagrams and Associated Reaction Pathways for Chlorine Evolution
Authors:
Vaidish Sumaria,
Dilip Krishnamurthy,
Venkatasubramanian Viswanathan
Abstract:
Density functional theory calculations can be used to identify dominant reaction mechanisms. However, the dominant reaction mechanism is sensitive to choice of the exchange correlation functional. Here, we demonstrate using the example case of chlorine evolution reaction on rutile oxides, which can occur through at least three reaction mechanisms each mediated by different surface intermediates an…
▽ More
Density functional theory calculations can be used to identify dominant reaction mechanisms. However, the dominant reaction mechanism is sensitive to choice of the exchange correlation functional. Here, we demonstrate using the example case of chlorine evolution reaction on rutile oxides, which can occur through at least three reaction mechanisms each mediated by different surface intermediates and active sites. We utilize Bayesian error estimation capabilities within the BEEF-vdW exchange correlation (XC) functional to quantify the uncertainty associated with predictions of the operative reaction mechanism by systematically propagating the uncertainty originating from DFT-computed adsorption free energies. We construct surface Pourbaix diagrams based on the calculated adsorption free energies for rutile oxides of Ru, Ir, Ti, Pt, V, Sn and Rh. We utilize confidence-value (c-value) to determine the degree of confidence in the predicted surface phase diagrams. Using the scaling relations between the adsorption energies of intermediates we construct a generalized Pourbaix diagram showing the stable surface composition as a function of potential and the oxygen binding energy on the cus site. This is used to consistently determine activity volcano relationships. We incorporate the uncertainty in linear scaling relations to quantify the confidence in generalized Pourbaix diagram and the associated activity. This allows us to compute the expectation limiting potential as a function of $ΔE_{O^c}$, which provides a more appropriate activity measure incorporating DFT uncertainty. We show that the confidence in the classification problem of identifying the active reaction mechanism is much better than the prediction problem of determining catalytic activity.
△ Less
Submitted 8 April, 2018;
originally announced April 2018.
-
Quantifying Confidence in DFT Predicted Surface Pourbaix Diagrams of Transition Metal Electrode-Electrolyte Interfaces
Authors:
Olga Vinogradova,
Dilip Krishnamurthy,
Vikram Pande,
Venkatasubramanian Viswanathan
Abstract:
Density Functional Theory (DFT) calculations have been widely used to predict the activity of catalysts based on the free energies of reaction intermediates. The incorporation of the state of the catalyst surface under the electrochemical operating conditions while constructing the free energy diagram is crucial, without which even trends in activity predictions could be imprecisely captured. Surf…
▽ More
Density Functional Theory (DFT) calculations have been widely used to predict the activity of catalysts based on the free energies of reaction intermediates. The incorporation of the state of the catalyst surface under the electrochemical operating conditions while constructing the free energy diagram is crucial, without which even trends in activity predictions could be imprecisely captured. Surface Pourbaix diagrams indicate the surface state as a function of the pH and the potential. In this work, we utilize error-estimation capabilities within the BEEF-vdW exchange correlation functional as an ensemble approach to propagate the uncertainty associated with the adsorption energetics in the construction of Pourbaix diagrams. Within this approach, surface-transition phase boundaries are no longer sharp and are therefore associated with a finite width. We determine the surface phase diagram for several transition metals under reaction conditions and electrode potentials relevant for the Oxygen Reduction Reaction (ORR). We observe that our surface phase predictions for most predominant species are in good agreement with cyclic voltammetry experiments and prior DFT studies. We use the OH$^*$ intermediate for comparing adsorption characteristics on Pt(111), Pt(100), Pd(111), Ir(111), Rh(111), and Ru(0001) since it has been shown to have a higher prediction efficiency relative to O$^*$, and find the trend Ru>Rh>Ir>Pt>Pd for (111) metal facets, where Ru binds OH$^*$ the strongest. We robustly predict the likely surface phase as a function of reaction conditions by associating c-values to quantifying the confidence in predictions within the Pourbaix diagram. We define a confidence quantifying metric using which certain experimentally observed surface phases and peak assignments can be better rationalized.
△ Less
Submitted 5 July, 2018; v1 submitted 23 October, 2017;
originally announced October 2017.
-
Maximal predictability approach for identifying the right descriptors for electrocatalytic reactions
Authors:
Dilip Krishnamurthy,
Vaidish Sumaria,
Venkatasubramanian Viswanathan
Abstract:
Density Functional Theory (DFT) calculations are being routinely used to identify new material candidates that approach activity near fundamental limits imposed by thermodynamics or scaling relations. DFT calculations have finite uncertainty and this raises an issue related to the ability to delineate materials that possess high activity. With the development of error estimation capabilities in DF…
▽ More
Density Functional Theory (DFT) calculations are being routinely used to identify new material candidates that approach activity near fundamental limits imposed by thermodynamics or scaling relations. DFT calculations have finite uncertainty and this raises an issue related to the ability to delineate materials that possess high activity. With the development of error estimation capabilities in DFT, there is an urgent need to propagate uncertainty through activity prediction models. In this work, we demonstrate a rigorous approach to propagate uncertainty within thermodynamic activity models. This maps the calculated activity into a probability distribution, and can be used to calculate the expectation value of the distribution, termed as the expected activity. We prove that the ability to distinguish materials increases with reducing uncertainty. We define a quantity, prediction efficiency, which provides a precise measure of the ability to distinguish the activity of materials for a reaction scheme over an activity range. We demonstrate the framework for 4 important electrochemical reactions, hydrogen evolution, chlorine evolution, oxygen reduction and oxygen evolution. We argue that future studies should utilize the expected activity and prediction efficiency to improve the likelihood of identifying material candidates that can possess high activity.
△ Less
Submitted 22 September, 2017; v1 submitted 8 September, 2017;
originally announced September 2017.
-
Surface Restructuring of Nickel Sulfide Generates Optimally-Coordinated Active Sites for ORR Catalysis
Authors:
Bing Yan,
Dilip Krishnamurthy,
Christopher H. Hendon,
Siddharth Deshpande,
Yogesh Surendranath,
Venkatasubramanian Viswanathan
Abstract:
First-row transition metal oxides and chalcogenides have been found to rival the performance of precious metal-based catalysts for the interconversion of water and O$_2$. The high lability of the first-row transition metal ions leads to surface dynamics under the conditions of catalysis and results in active site structures distinct from those expected by surface termination of the bulk lattice. W…
▽ More
First-row transition metal oxides and chalcogenides have been found to rival the performance of precious metal-based catalysts for the interconversion of water and O$_2$. The high lability of the first-row transition metal ions leads to surface dynamics under the conditions of catalysis and results in active site structures distinct from those expected by surface termination of the bulk lattice. While these surface transformations have been well-characterized on many metal oxides, the surface dynamics of heavier chalcogenides under electrocatalytic conditions are largely unknown. We recently reported that the heazlewoodite Ni$_3$S$_2$ bulk phase supports efficient ORR catalysis under benign aqueous conditions and exhibits excellent tolerance to electrolyte anions such as phosphate which poison Pt. Herein, we combine electrochemistry, surface spectroscopy and high resolution microscopy to characterize the surface dynamics of Ni$_3$S$_2$ under ORR catalytic conditions. We show that Ni$_3$S$_2$ undergoes self-limiting oxidative surface restructuring to form an approximately 2 nm amorphous surface film conformally coating the Ni$_3$S$_2$ crystallites. The surface film has a nominal NiS stoichiometry and is highly active for ORR catalysis. Using DFT calculations we show that, to a first approximation, the catalytic activity of nickel sulfides is determined by the Ni-S coordination numbers at surface exposed sites through a simple geometric descriptor. In particular, we find that the surface sites formed dynamically on the surface of amorphous NiS during surface restructuring provide an optimal energetic landscape for ORR catalysis. This work provides a systematic framework for characterizing the rich surface chemistry of metal-chalcogenides and provides principles for developing a broader understanding of electrocatalysis mediated by amorphous materials.
△ Less
Submitted 13 June, 2017;
originally announced June 2017.
-
Correlation between Local Structure Distortions and Martensitic Transformation in Ni-Mn-In alloys
Authors:
D. N. Lobo,
K. R. Priolkar,
P. A. Bhobe,
D. Krishnamurthy,
S. Emura
Abstract:
The local structural distortions arising as a consequence of increasing Mn content in Ni_2Mn_1+xIn_1-x (x=0, 0.3, 0.4, 0.5 and 0.6) and its effect on martensitic transformation have been studied using Extended X-ray Absorption Fine Structure (EXAFS) spectroscopy. Using the room temperature EXAFS at the Ni and Mn K-edges in the above compositions, the changes associated with respect to the local st…
▽ More
The local structural distortions arising as a consequence of increasing Mn content in Ni_2Mn_1+xIn_1-x (x=0, 0.3, 0.4, 0.5 and 0.6) and its effect on martensitic transformation have been studied using Extended X-ray Absorption Fine Structure (EXAFS) spectroscopy. Using the room temperature EXAFS at the Ni and Mn K-edges in the above compositions, the changes associated with respect to the local structure of these absorbing atoms are compared. It is seen that in the alloys exhibiting martensitic transformation ($x \ge 0.4$) there is a significant difference between the Ni-In and Ni-Mn bond lengths even in the austenitic phase indicating atomic volume to be the main factor in inducing martensitic transformation in Ni-Mn-In Heusler alloys.
△ Less
Submitted 26 May, 2010;
originally announced May 2010.
