Showing 1–36 of 36 results for author: Kramer, M J

Correlating Superconducting Qubit Performance Losses to Sidewall Near-Field Scattering via Terahertz Nanophotonics

Authors: Richard H. J. Kim, Samuel J. Haeuser, Joong-Mok Park, Randall K. Chan, Jin-Su Oh, Thomas Koschny, Lin Zhou, Matthew J. Kramer, Akshay A. Murthy, Mustafa Bal, Francesco Crisa, Sabrina Garattoni, Shaojiang Zhu, Andrei Lunin, David Olaya, Peter Hopkins, Alex Romanenko, Anna Grassellino, Jigang Wang

Abstract: Elucidating dielectric losses, structural heterogeneity, and interface imperfections is critical for improving coherence in superconducting qubits. However, most diagnostics rely on destructive electron microscopy or low-throughput millikelvin quantum measurements. Here, we demonstrate noninvasive terahertz (THz) nano-imaging/-spectroscopy of encapsulated niobium transmon qubits, revealing sidewal… ▽ More Elucidating dielectric losses, structural heterogeneity, and interface imperfections is critical for improving coherence in superconducting qubits. However, most diagnostics rely on destructive electron microscopy or low-throughput millikelvin quantum measurements. Here, we demonstrate noninvasive terahertz (THz) nano-imaging/-spectroscopy of encapsulated niobium transmon qubits, revealing sidewall near-field scattering that correlates with qubit coherence. We further employ a THz hyperspectral line scan to probe dielectric responses and field participation at Al junction interfaces. These findings highlight the promise of THz near-field methods as a high-throughput proxy characterization tool for guiding material selection and optimizing processing protocols to improve qubit and quantum circuit performance. △ Less

Submitted 5 June, 2025; originally announced June 2025.

Identifying Materials-Level Sources of Performance Variation in Superconducting Transmon Qubits

Authors: Akshay A. Murthy, Mustafa Bal, Michael J. Bedzyk, Hilal Cansizoglu, Randall K. Chan, Venkat Chandrasekhar, Francesco Crisa, Amlan Datta, Yanpei Deng, Celeo D. Matute Diaz, Vinayak P. Dravid, David A. Garcia-Wetten, Sabrina Garattoni, Sunil Ghimire, Dominic P. Goronzy, Sebastian de Graaf, Sam Haeuser, Mark C. Hersam, Peter Hopkins, Dieter Isheim, Kamal Joshi, Richard Kim, Saagar Kolachina, Cameron J. Kopas, Matthew J. Kramer , et al. (24 additional authors not shown)

Abstract: The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying… ▽ More The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying base superconducting metals and substrates have been examined with various nondestructive and invasive material characterization techniques at Northwestern University, Ames National Laboratory, and Fermilab as part of a blind study. We find trends in variations of the depth of the etched substrate trench, the thickness of the surface oxide, and the geometry of the sidewall, which when combined, lead to correlations with the T$_1$ lifetime across different devices. In addition, we provide a list of features that varied from device to device, for which the impact on performance requires further studies. Finally, we identify two low-temperature characterization techniques that may potentially serve as proxy tools for qubit measurements. These insights provide materials-oriented solutions to not only reduce performance variations across neighboring devices, but also to engineer and fabricate devices with optimal geometries to achieve performance metrics beyond the state-of-the-art values. △ Less

Submitted 2 June, 2025; v1 submitted 18 March, 2025; originally announced March 2025.

Enhanced Superconducting Qubit Performance Through Ammonium Fluoride Etch

Authors: Cameron J. Kopas, Dominic P. Goronzy, Thang Pham, Carlos G. Torres Castanedo, Matthew Cheng, Rory Cochrane, Patrick Nast, Ella Lachman, Nikolay Z. Zhelev, Andre Vallieres, Akshay A. Murthy, Jin-su Oh, Lin Zhou, Matthew J. Kramer, Hilal Cansizoglu, Michael J. Bedzyk, Vinayak P. Dravid, Alexander Romanenko, Anna Grassellino, Josh Y. Mutus, Mark C. Hersam, Kameshwar Yadavalli

Abstract: The performance of superconducting qubits is often limited by dissipation and two-level systems (TLS) losses. The dominant sources of these losses are believed to originate from amorphous materials and defects at interfaces and surfaces, likely as a result of fabrication processes or ambient exposure. Here, we explore a novel wet chemical surface treatment at the Josephson junction-substrate and t… ▽ More The performance of superconducting qubits is often limited by dissipation and two-level systems (TLS) losses. The dominant sources of these losses are believed to originate from amorphous materials and defects at interfaces and surfaces, likely as a result of fabrication processes or ambient exposure. Here, we explore a novel wet chemical surface treatment at the Josephson junction-substrate and the substrate-air interfaces by replacing a buffered oxide etch (BOE) cleaning process with one that uses hydrofluoric acid followed by aqueous ammonium fluoride. We show that the ammonium fluoride etch process results in a statistically significant improvement in median $\text{T}_1$ by $\sim22\%$ ($p=0.002$), and a reduction in the number of strongly-coupled TLS in the tunable frequency range. Microwave resonator measurements on samples treated with the ammonium fluoride etch prior to niobium deposition also show $\sim33\%$ lower TLS-induced loss tangent compared to the BOE treated samples. As the chemical treatment primarily modifies the Josephson junction-substrate interface and substrate-air interface, we perform targeted chemical and structural characterizations to examine materials' differences at these interfaces and identify multiple microscopic changes that could contribute to decreased TLS. △ Less

Submitted 5 August, 2024; originally announced August 2024.

Alternating Bias Assisted Annealing of Amorphous Oxide Tunnel Junctions

Authors: David P. Pappas, Mark Field, Cameron Kopas, Joel A. Howard, Xiqiao Wang, Ella Lachman, Lin Zhou, Jinsu Oh, Kameshwar Yadavalli, Eyob A. Sete, Andrew Bestwick, Matthew J. Kramer, Joshua Y. Mutus

Abstract: We demonstrate a transformational technique for controllably tuning the electrical properties of fabricated thermally oxidized amorphous aluminum-oxide tunnel junctions. Using conventional test equipment to apply an alternating bias to a heated tunnel barrier, giant increases in the room temperature resistance, greater than 70%, can be achieved. The rate of resistance change is shown to be strongl… ▽ More We demonstrate a transformational technique for controllably tuning the electrical properties of fabricated thermally oxidized amorphous aluminum-oxide tunnel junctions. Using conventional test equipment to apply an alternating bias to a heated tunnel barrier, giant increases in the room temperature resistance, greater than 70%, can be achieved. The rate of resistance change is shown to be strongly temperature-dependent, and is independent of junction size in the sub-micron regime. In order to measure their tunneling properties at mK temperatures, we characterized transmon qubit junctions treated with this alternating-bias assisted annealing (ABAA) technique. The measured frequencies follow the Ambegaokar-Baratoff relation between the shifted resistance and critical current. Further, these studies show a reduction of junction-contributed loss on the order of $\approx 2 \times10^{-6}$, along with a significant reduction in resonant- and off-resonant-two level system defects when compared to untreated samples. Imaging with high-resolution TEM shows that the barrier is still predominantly amorphous with a more uniform distribution of aluminum coordination across the barrier relative to untreated junctions. This new approach is expected to be widely applicable to a broad range of devices that rely on amorphous aluminum oxide, as well as the many other metal-insulator-metal structures used in modern electronics. △ Less

Submitted 16 August, 2024; v1 submitted 14 January, 2024; originally announced January 2024.

Journal ref: Communications Materials volume 5, Article number: 150 (2024)

Bulk synthesis of Zn$_3$WN$_4$ via solid-state metathesis

Authors: Christopher L. Rom, Shaun O'Donnell, Kayla Huang, Ryan A. Klein, Morgan J. Kramer, Rebecca W. Smaha, Andriy Zakutayev

Abstract: Ternary nitrides are of growing technological importance, with applications as semiconductors, catalysts, and magnetic materials; however, new synthetic tools are needed to advance materials discovery efforts. Here, we show that Zn$_3$WN$_4$ can be synthesized via metathesis reactions between Li$_6$WN$_4$ and Zn$X_2$ ($X$ = Br, Cl, F). In situ synchrotron powder X-ray diffraction and differential… ▽ More Ternary nitrides are of growing technological importance, with applications as semiconductors, catalysts, and magnetic materials; however, new synthetic tools are needed to advance materials discovery efforts. Here, we show that Zn$_3$WN$_4$ can be synthesized via metathesis reactions between Li$_6$WN$_4$ and Zn$X_2$ ($X$ = Br, Cl, F). In situ synchrotron powder X-ray diffraction and differential scanning calorimetry show that the reaction onset is correlated with the Zn$X_2$ melting point and that product purity is inversely correlated with the reaction's exothermicity. High resolution synchrotron powder X-ray diffraction measurements show that this bulk synthesis produces a structure with substantial cation ordering, as opposed to the disordered structure initially discovered via thin film sputtering. Diffuse reflectance spectroscopy reveals that Zn$_3$WN$_4$ powders exhibit two optical absorption onsets at 2.5 eV and 4.0 eV, indicating wide-bandgap semiconducting behavior and suggesting a small amount of structural disorder. We hypothesize that this synthesis strategy is generalizable because many potential Li-$M$-N precursors (where $M$ is a metal) are available for synthesizing new ternary nitride materials. This work introduces a promising synthesis strategy that will accelerate the discovery of novel functional ternary nitrides and other currently inaccessible materials. △ Less

Submitted 5 January, 2024; v1 submitted 3 January, 2024; originally announced January 2024.

Journal ref: Chem. Sci. 2024

Quasiparticle spectroscopy in technologically-relevant niobium using London penetration depth measurements

Authors: Sunil Ghimire, Kamal R. Joshi, Amlan Datta, Aidan Goerdt, Makariy A. Tanatar, Deborah Schlagel, Matthew J. Kramer, Jayss Marshall, Cameron J. Copas, Joshua Y. Mutus, Alexander Romanenko, Anna Grassellino, Ruslan Prozorov

Abstract: London penetration depth was measured in niobium foils, thin films, single crystals, and superconducting radio-frequency (SRF) cavity pieces cut out from different places. The low-temperature (T<Tc/3) variation, sensitive to the low-energy quasiparticles with states inside the superconducting gap, differs dramatically between different types of samples. With the help of phenomenological modeling,… ▽ More London penetration depth was measured in niobium foils, thin films, single crystals, and superconducting radio-frequency (SRF) cavity pieces cut out from different places. The low-temperature (T<Tc/3) variation, sensitive to the low-energy quasiparticles with states inside the superconducting gap, differs dramatically between different types of samples. With the help of phenomenological modeling, we correlate these different behaviors with known pair-breaking mechanisms and show that such measurements may help distinguish between different pair-breaking mechanisms, such as niobium hydrides and two-level systems (TLS). The conclusions also apply to SRF cavities when tracking the temperature-dependent quality factor and the resonant frequency. △ Less

Submitted 23 June, 2023; originally announced June 2023.

Journal ref: Materials for Quantum Technology 4, 45201 (2024)

Systematic Improvements in Transmon Qubit Coherence Enabled by Niobium Surface Encapsulation

Authors: Mustafa Bal, Akshay A. Murthy, Shaojiang Zhu, Francesco Crisa, Xinyuan You, Ziwen Huang, Tanay Roy, Jaeyel Lee, David van Zanten, Roman Pilipenko, Ivan Nekrashevich, Andrei Lunin, Daniel Bafia, Yulia Krasnikova, Cameron J. Kopas, Ella O. Lachman, Duncan Miller, Josh Y. Mutus, Matthew J. Reagor, Hilal Cansizoglu, Jayss Marshall, David P. Pappas, Kim Vu, Kameshwar Yadavalli, Jin-Su Oh , et al. (15 additional authors not shown)

Abstract: We present a novel transmon qubit fabrication technique that yields systematic improvements in T$_1$ relaxation times. We fabricate devices using an encapsulation strategy that involves passivating the surface of niobium and thereby preventing the formation of its lossy surface oxide. By maintaining the same superconducting metal and only varying the surface structure, this comparative investigati… ▽ More We present a novel transmon qubit fabrication technique that yields systematic improvements in T$_1$ relaxation times. We fabricate devices using an encapsulation strategy that involves passivating the surface of niobium and thereby preventing the formation of its lossy surface oxide. By maintaining the same superconducting metal and only varying the surface structure, this comparative investigation examining different capping materials, such as tantalum, aluminum, titanium nitride, and gold, and film substrates across different qubit foundries definitively demonstrates the detrimental impact that niobium oxides have on the coherence times of superconducting qubits, compared to native oxides of tantalum, aluminum or titanium nitride. Our surface-encapsulated niobium qubit devices exhibit T$_1$ relaxation times 2 to 5 times longer than baseline niobium qubit devices with native niobium oxides. When capping niobium with tantalum, we obtain median qubit lifetimes above 300 microseconds, with maximum values up to 600 microseconds, that represent the highest lifetimes to date for superconducting qubits prepared on both sapphire and silicon. Our comparative structural and chemical analysis suggests why amorphous niobium oxides may induce higher losses compared to other amorphous oxides. These results are in line with high-accuracy measurements of the niobium oxide loss tangent obtained with ultra-high Q superconducting radiofrequency (SRF) cavities. This new surface encapsulation strategy enables even further reduction of dielectric losses via passivation with ambient-stable materials, while preserving fabrication and scalable manufacturability thanks to the compatibility with silicon processes. △ Less

Submitted 24 January, 2024; v1 submitted 25 April, 2023; originally announced April 2023.

Journal ref: npj Quantum Inf 10, 43 (2024)

Quasiparticle spectroscopy, transport, and magnetic properties of Nb films used in superconducting transmon qubits

Authors: Kamal R. Joshi, Sunil Ghimire, Makariy A. Tanatar, Amlan Datta, Jin-Su Oh, Lin Zhou, Cameron J. Kopas, Jayss Marshall, Josh Y. Mutus, Julie Slaughter, Matthew J. Kramer, James A. Sauls, Ruslan Prozorov

Abstract: Niobium thin films on silicon substrate used in the fabrication of superconducting qubits have been characterized using scanning and transmission electron microscopy, electrical transport, magnetization, quasiparticle spectroscopy, and real-space real-time magneto-optical imaging. We study niobium films to provide an example of a comprehensive analytical set that may benefit superconducting circui… ▽ More Niobium thin films on silicon substrate used in the fabrication of superconducting qubits have been characterized using scanning and transmission electron microscopy, electrical transport, magnetization, quasiparticle spectroscopy, and real-space real-time magneto-optical imaging. We study niobium films to provide an example of a comprehensive analytical set that may benefit superconducting circuits such as those used in quantum computers. The films show outstanding superconducting transition temperature of $T_{c}=9.35$ K and a fairly clean superconducting gap, along with superfluid density enhanced at intermediate temperatures. These observations are consistent with the recent theory of anisotropic strong-coupling superconductivity in Nb. However, the response to the magnetic field is complicated, exhibiting significantly irreversible behavior and insufficient heat conductance leading to thermo-magnetic instabilities. These may present an issue for further improvement of transmon quantum coherence. Possible mitigation strategies are discussed. △ Less

Submitted 23 July, 2022; originally announced July 2022.

Journal ref: Phys. Rev. Applied 20, 024031 (2023)

Developing a Chemical and Structural Understanding of the Surface Oxide in a Niobium Superconducting Qubit

Authors: Akshay A. Murthy, Paul Masih Das, Stephanie M. Ribet, Cameron Kopas, Jaeyel Lee, Matthew J. Reagor, Lin Zhou, Matthew J. Kramer, Mark C. Hersam, Mattia Checchin, Anna Grassellino, Roberto dos Reis, Vinayak P. Dravid, Alexander Romanenko

Abstract: Superconducting thin films of niobium have been extensively employed in transmon qubit architectures. Although these architectures have demonstrated remarkable improvements in recent years, further improvements in performance through materials engineering will aid in large-scale deployment. Here, we use information retrieved from secondary ion mass spectrometry and electron microscopy to conduct a… ▽ More Superconducting thin films of niobium have been extensively employed in transmon qubit architectures. Although these architectures have demonstrated remarkable improvements in recent years, further improvements in performance through materials engineering will aid in large-scale deployment. Here, we use information retrieved from secondary ion mass spectrometry and electron microscopy to conduct a detailed assessment of the surface oxide that forms in ambient conditions for transmon test qubit devices patterned from a niobium film. We observe that this oxide exhibits a varying stoichiometry with NbO and NbO$_2$ found closer to the niobium film and Nb$_2$O$_5$ found closer to the surface. In terms of structural analysis, we find that the Nb$_2$O$_5$ region is semicrystalline in nature and exhibits randomly oriented grains on the order of 1-2 nm corresponding to monoclinic N-Nb$_2$O$_5$ that are dispersed throughout an amorphous matrix. Using fluctuation electron microscopy, we are able to map the relative crystallinity in the Nb$_2$O$_5$ region with nanometer spatial resolution. Through this correlative method, we observe that amorphous regions are more likely to contain oxygen vacancies and exhibit weaker bonds between the niobium and oxygen atoms. Based on these findings, we expect that oxygen vacancies likely serve as a decoherence mechanism in quantum systems. △ Less

Submitted 28 July, 2022; v1 submitted 16 March, 2022; originally announced March 2022.

Comments: 13 pages, 4 figures

Short- and medium-range orders in Al90Tb10 glass and their relation to the structures of competing crystalline phases

Authors: L. Tang, Z. J. Yang, T. Q. Wen, K. M. Ho, M. J. Kramer, C. Z. Wang

Abstract: Molecular dynamics simulations using an interatomic potential developed by artificial neural network deep machine learning are performed to study the local structural order in Al90Tb10 metallic glass. We show that more than 80% of the Tb-centered clusters in Al90Tb10 glass have short-range order (SRO) with their 17 first coordination shell atoms stacked in a '3661' or '15551' sequence. Medium-rang… ▽ More Molecular dynamics simulations using an interatomic potential developed by artificial neural network deep machine learning are performed to study the local structural order in Al90Tb10 metallic glass. We show that more than 80% of the Tb-centered clusters in Al90Tb10 glass have short-range order (SRO) with their 17 first coordination shell atoms stacked in a '3661' or '15551' sequence. Medium-range order (MRO) in Bergman-type packing extended out to the second and third coordination shells is also clearly observed. Analysis of the network formed by the '3661' and '15551' clusters show that ~82% of such SRO units share their faces or vertexes, while only ~6% of neighboring SRO pairs are interpenetrating. Such a network topology is consistent with the Bergman-type MRO around the Tb-centers. Moreover, crystal structure searches using genetic algorithm and the neural network interatomic potential reveal several low-energy metastable crystalline structures in the composition range close to Al90Tb10. Some of these crystalline structures have the '3661' SRO while others have the '15551' SRO. While the crystalline structures with the '3661' SRO also exhibit the MRO very similar to that observed in the glass, the ones with the '15551' SRO have very different atomic packing in the second and third shells around the Tb centers from that of the Bergman-type MRO observed in the glassy phase. △ Less

Submitted 27 August, 2020; originally announced August 2020.

Reinvestigation of the intrinsic magnetic properties of (Fe$_{1-x}$Co$_x$)$_2$B alloys and crystallization behavior of ribbons

Authors: Tej Nath Lamichhane, Olena Palasyuk, Vladimir P. Antropov, Ivan A. Zhuravlev, Kirill D. Belashchenko, Ikenna C. Nlebedim, Kevin W. Dennis, Anton Jesche, Matthew J. Kramer, Sergey L. Bud'ko, R. William McCallum, Paul C. Canfield, Valentin Taufour

Abstract: New determination of the magnetic anisotropy from single crystals of (Fe$_{1-x}$Co$_x$)$_2$B alloys are presented. The anomalous temperature dependence of the anisotropy constant is discussed using the standard Callen-Callen theory, which is shown to be insufficient to explain the experimental results. A more material specific study using first-principles calculations with disordered moments appro… ▽ More New determination of the magnetic anisotropy from single crystals of (Fe$_{1-x}$Co$_x$)$_2$B alloys are presented. The anomalous temperature dependence of the anisotropy constant is discussed using the standard Callen-Callen theory, which is shown to be insufficient to explain the experimental results. A more material specific study using first-principles calculations with disordered moments approach gives a much more consistent interpretation of the experimental data. Since the intrinsic properties of the alloys with $x=0.3-0.35$ are promising for permanent magnets applications, initial investigation of the extrinsic properties are described, in particular the crystallization of melt spun ribbons with Cu, Al, and Ti additions. Previous attempts at developing a significant hysteresis have been unsuccessful in this system. Our melt-spinning experiment indicates that this system shows rapid crystallization. △ Less

Submitted 29 July, 2020; originally announced July 2020.

Journal ref: Journal of Magnetism and Magnetic Materials, 2020, 513, 167214

Development of Interatomic Potential for Al-Tb Alloy by Deep Neural Network Learning Method

Authors: L. Tang, Z. J. Yang, T. Q. Wen, K. M. Ho, M. J. Kramer, C. Z. Wang

Abstract: An interatomic potential for Al-Tb alloy around the composition of Al90Tb10 was developed using the deep neural network (DNN) learning method. The atomic configurations and the corresponding total potential energies and forces on each atom obtained from ab initio molecular dynamics (AIMD) simulations are collected to train a DNN model to construct the interatomic potential for Al-Tb alloy. We show… ▽ More An interatomic potential for Al-Tb alloy around the composition of Al90Tb10 was developed using the deep neural network (DNN) learning method. The atomic configurations and the corresponding total potential energies and forces on each atom obtained from ab initio molecular dynamics (AIMD) simulations are collected to train a DNN model to construct the interatomic potential for Al-Tb alloy. We show the obtained DNN model can well reproduce the energies and forces calculated by AIMD. Molecular dynamics (MD) simulations using the DNN interatomic potential also accurately describe the structural properties of Al90Tb10 liquid, such as the partial pair correlation functions (PPCFs) and the bond angle distributions, in comparison with the results from AIMD. Furthermore, the developed DNN interatomic potential predicts the formation energies of crystalline phases of Al-Tb system with the accuracy comparable to ab initio calculations. The structure factor of Al90Tb10 metallic glass obtained by MD simulation using the developed DNN interatomic potential is also in good agreement with the experimental X-ray diffraction data. △ Less

Submitted 28 March, 2020; v1 submitted 18 January, 2020; originally announced January 2020.

Vacancy-mediated complex phase selection in high entropy alloys

Authors: Prashant Singh, Srinivasa Thimmaiah, Bryce Thoeny, Pratik K. Ray, A. V. Smirnov, Duane D. Johnson, Matthew J. Kramer

Abstract: Phase selection in Ti-Zr-Hf-Al high-entropy alloys was investigated by in-situ high-energy X$-$ray diffraction, single-crystal X$-$ray diffraction, and density-functional theory based electronic-structure methods that address disorder and vacancies, predicting formation enthalpy and chemical short-range order (SRO). Samples with varying Al content were synthesized, characterized, and computational… ▽ More Phase selection in Ti-Zr-Hf-Al high-entropy alloys was investigated by in-situ high-energy X$-$ray diffraction, single-crystal X$-$ray diffraction, and density-functional theory based electronic-structure methods that address disorder and vacancies, predicting formation enthalpy and chemical short-range order (SRO). Samples with varying Al content were synthesized, characterized, and computationally assessed to ascertain the composition-dependent phase selection, as increased Al content often acts as a stabilizer of a body-centered-cubic structure. Equiatomic TiZrHfAl was especially interesting due to its observed bcc superstructure - a variant of $γ-$brass with 4 vacancies per cell (not 2 as in $γ-$brass). We highlight how vacancy ordering mediates selection of this variant of $γ-$brass, which is driven by vacancy-atom SRO that dramatically suppress all atomic SRO. As vacancies are inherent in processing refractory systems, we expect that similar discoveries await in other high entropy alloys or in revisiting older experimental data. △ Less

Submitted 30 April, 2020; v1 submitted 23 December, 2019; originally announced December 2019.

Comments: 19 Pages, 7 Figures, 3 Table

Mechanisms of skyrmion and skyrmion crystal formation from the conical phase

Authors: Taehoon Kim, Haijun Zhao, Ben Xu, Brandt A Jensen, Alexander H King, Matthew J Kramer, Cewen Nan, Liqin Ke, Lin Zhou

Abstract: Real-space topological magnetic structures such as skyrmions and merons are promising candidates for information storage and transport. However, the microscopic mechanisms that control their formation and evolution are still not clear. Here, using in-situ Lorentz transmission electron microscopy, we demonstrate that skyrmion crystals (SkXs) can nucleate, grow, and evolve from the conical phase in… ▽ More Real-space topological magnetic structures such as skyrmions and merons are promising candidates for information storage and transport. However, the microscopic mechanisms that control their formation and evolution are still not clear. Here, using in-situ Lorentz transmission electron microscopy, we demonstrate that skyrmion crystals (SkXs) can nucleate, grow, and evolve from the conical phase in the same ways that real nanocrystals form from vapors or solutions. More intriguingly, individual skyrmions can also "reproduce" by division in a mitosis-like process that allows them to annihilate SkX lattice imperfections, which is not available to crystals made of mass-conserving particles. Combined string method and micromagnetic calculations show that competition between repulsive and attractive interactions between skyrmions governs particle-like SkX growth, but non-conservative SkX growth appears to be defect-mediated. Our results provide insights towards manipulating magnetic topological states by applying established crystal growth theory, adapted to account for the new process of skyrmion mitosis. △ Less

Submitted 6 December, 2019; originally announced December 2019.

Comments: Results of this paper was presented on Aug. 6, 2019, at Microscopy & Microanalysis 2019 (Portland, OR)

Journal ref: Nano Lett. 2020, 20, 7, 4731-4738

Uncompensated Polarization in Incommensurate Modulations of Perovskite Antiferroelectrics

Authors: Tao Ma, Zhongming Fan, Bin Xu, Tae-Hoon Kim, Ping Lu, Laurent Bellaiche, Matthew J. Kramer, Xiaoli Tan, Lin Zhou

Abstract: Complex polar structures of incommensurate modulations (ICMs) are revealed in chemically modified PbZrO$_3$ perovskite antiferroelectrics using advanced transmission electron microscopy techniques. The Pb-cation displacements, previously assumed to arrange in a fully-compensated antiparallel fashion, are found to be either antiparallel but with different magnitudes, or in a nearly orthogonal arran… ▽ More Complex polar structures of incommensurate modulations (ICMs) are revealed in chemically modified PbZrO$_3$ perovskite antiferroelectrics using advanced transmission electron microscopy techniques. The Pb-cation displacements, previously assumed to arrange in a fully-compensated antiparallel fashion, are found to be either antiparallel but with different magnitudes, or in a nearly orthogonal arrangement in adjacent stripes in the ICMs. Ab initio calculations corroborate the low-energy state of these arrangements. Our discovery corrects the atomic understanding of ICMs in PbZrO$_3$-based perovskite antiferroelectrics. △ Less

Submitted 18 October, 2019; v1 submitted 5 September, 2019; originally announced September 2019.

Journal ref: Phys. Rev. Lett. 123, 217602 (2019)

Fatigue-resistant high-performance elastocaloric materials via additive manufacturing

Authors: Huilong Hou, Emrah Simsek, Tao Ma, Nathan S. Johnson, Suxin Qian, Cheikh Cisse, Drew Stasak, Naila Al Hasan, Lin Zhou, Yunho Hwang, Reinhard Radermacher, Valery I. Levitas, Matthew J. Kramer, Mohsen Asle Zaeem, Aaron P. Stebner, Ryan T. Ott, Jun Cui, Ichiro Takeuchi

Abstract: Elastocaloric cooling, which exploits the latent heat released and absorbed as stress-induced phase transformations are reversibly cycled in shape memory alloys, has recently emerged as a frontrunner in non-vapor-compression cooling technologies. The intrinsically high thermodynamic efficiency of elastocaloric materials is limited only by work hysteresis. Here, we report on creating high-performan… ▽ More Elastocaloric cooling, which exploits the latent heat released and absorbed as stress-induced phase transformations are reversibly cycled in shape memory alloys, has recently emerged as a frontrunner in non-vapor-compression cooling technologies. The intrinsically high thermodynamic efficiency of elastocaloric materials is limited only by work hysteresis. Here, we report on creating high-performance low-hysteresis elastocaloric cooling materials via additive manufacturing of Titanium-Nickel (Ti-Ni) alloys. Contrary to established knowledge of the physical metallurgy of Ti-Ni alloys, intermetallic phases are found to be beneficial to elastocaloric performances when they are combined with the binary Ti-Ni compound in nanocomposite configurations. The resulting microstructure gives rise to quasi-linear stress-strain behaviors with extremely small hysteresis, leading to enhancement in the materials efficiency by a factor of five. Furthermore, despite being composed of more than 50% intermetallic phases, the reversible, repeatable elastocaloric performance of this material is shown to be stable over one million cycles. This result opens the door for direct implementation of additive manufacturing to elastocaloric cooling systems where versatile design strategy enables both topology optimization of heat exchangers as well as unique microstructural control of metallic refrigerants. △ Less

Submitted 21 August, 2019; originally announced August 2019.

Comments: 38 pages, 3 figures, 8 supplementary figures, 1 supplementary table

Report number: Vol. 366, Issue 6469, pp. 1116-1121

Journal ref: Science 29 Nov 2019:

On spinodal decomposition in alnico---a transmission electron microscopy and atom probe tomography study

Authors: Lin Zhou, Wei Guo, Jonathan D. Poplawsky, Liqin Ke, Wei Tang, Iver E. Anderson, Matthew J. Kramer

Abstract: Alnico is a prime example of a finely tuned nanostructure whose magnetic properties are intimately connected to magnetic annealing (MA) during spinodal transformation and subsequent lower temperature annealing (draw) cycles. Using a combination of transmission electron microscopy and atom probe tomography, we show how these critical processing steps affect the local composition and nanostructure e… ▽ More Alnico is a prime example of a finely tuned nanostructure whose magnetic properties are intimately connected to magnetic annealing (MA) during spinodal transformation and subsequent lower temperature annealing (draw) cycles. Using a combination of transmission electron microscopy and atom probe tomography, we show how these critical processing steps affect the local composition and nanostructure evolution with impact on magnetic properties. The nearly 2-fold increase of intrinsic coercivity ($H_\text{ci}$) during the draw cycle is not adequately explained by chemical refinement of the spinodal phases. Instead, increased Fe-Co phase ($α_1$) isolation, development of Cu-rich spheres/rods/blades and additional $α_1$ rod precipitation that occurs during the MA and draw, likely play a key role in $H_\text{ci}$ enhancement. Chemical ordering of the Al-Ni-phase ($α_2$) and formation of Ni-rich ($α_3$) may also contribute. Unraveling of the subtle effect of these nano-scaled features is crucial to understanding on how to improve shape anisotropy in alnico magnets. △ Less

Submitted 30 October, 2018; originally announced October 2018.

Journal ref: Acta Materialia, 153:15 (2018)

Single Crystal Permanent Magnet: Extraordinary Magnetic Behavior in the ta, Cu and Fe Substituted CeCo5 System

Authors: Tej N. Lamichhane, Michael T. Onyszczak, Olena Palasyuk, Saba Sharikadze, Tae-Hoon Kim, Matthew J. Kramer, R. W. MacCallum, Aleksander L. Wysocki, Manh Cuong Nguyen, Vladimir P. Antropov, Tribhuvan Pandey, David Parker, Sergey L. Bud'ko, Paul C. Canfield, Andriy Palasyuk

Abstract: To reduce material and processing costs of commercial permanent magnets and to attempt to fill the empty niche of energy products, 10 - 20 MGOe, between low-flux (ferrites, alnico) and high-flux (Nd2Fe14B- and SmCo5-type) magnets, we report synthesis, structure, magnetic properties and modeling of Ta, Cu and Fe substituted CeCo5. Using a self-flux technique, we grew single crystals of I - Ce15.1Ta… ▽ More To reduce material and processing costs of commercial permanent magnets and to attempt to fill the empty niche of energy products, 10 - 20 MGOe, between low-flux (ferrites, alnico) and high-flux (Nd2Fe14B- and SmCo5-type) magnets, we report synthesis, structure, magnetic properties and modeling of Ta, Cu and Fe substituted CeCo5. Using a self-flux technique, we grew single crystals of I - Ce15.1Ta1.0Co74.4Cu9.5, II - Ce16.3Ta0.6Co68.9Cu14.2, III - Ce15.7Ta0.6Co67.8Cu15.9, IV - Ce16.3Ta0.3Co61.7Cu21.7 and V - Ce14.3Ta1.0Co62.0Fe12.3Cu10.4. X-ray diffraction analysis (XRD) showed that these materials retain a CaCu5 substructure and incorporate small amounts of Ta in the form of \dumb-bells", filling the 2e crystallographic sites within the 1D hexagonal channel with the 1a Ce site, whereas Co, Cu and Fe are statistically distributed among the 2c and 3g crystallographic sites. Scanning electron microscopy, energy dispersive X-ray spectroscopy (SEM-EDS) and scanning transmission electron microscopy (STEM) examinations provided strong evidence of the single-phase nature of the as-grown crystals, even though they readily exhibited significant magnetic coercivitie of ~1.6 - ~1.8 kOe caused by Co-enriched, nano-sized, structural defects and faults that can serve as pinning sites. Formation of the "composite crystal" during the heat treatment creates a 3D array of extended defects within a primarily single grain single crystal, which greatly improves its magnetic characteristics. Possible causes of the formation of the "composite crystal" may be associated with Ta atoms leaving matrix interstices at lower temperatures and/or matrix degradation induced by decreased miscibility at lower temperatures. Fe strongly improves both the Curie temperature and magnetization of the system resulting in (BH)max:~13 MGOe at room temperature. △ Less

Submitted 16 May, 2018; originally announced May 2018.

Comments: 17 pages, 18 figures

Report number: 2264281

Journal ref: Phys. Rev. Applied 11, 014052 (2019)

Magnetic properties of single crystalline itinerant ferromagnet AlFe2B2

Authors: Tej N. Lamichhane, Li Xiang, Qisheng Lin, Tribhuwan Pandey, David S. Parker, Tae-Hoon Kim, Lin Zhou, Matthew J. Kramer, Sergey L. Bud'ko, Paul C. Canfield

Abstract: Single crystals of AlFe$_{2}$B$_{2}$ have been grown using the self flux growth method and then measured the structural properties, temperature and field dependent magnetization, and temperature dependent electrical resistivity at ambient as well as high pressure. The Curie temperature of AlFe$_{2}$B$_{2}$ is determined to be $274$~K. The measured saturation magnetization and the effective moment… ▽ More Single crystals of AlFe$_{2}$B$_{2}$ have been grown using the self flux growth method and then measured the structural properties, temperature and field dependent magnetization, and temperature dependent electrical resistivity at ambient as well as high pressure. The Curie temperature of AlFe$_{2}$B$_{2}$ is determined to be $274$~K. The measured saturation magnetization and the effective moment for paramagnetic Fe-ion indicate the itinerant nature of the magnetism with a Rhode-Wohlfarth ratio $ \frac{M_{C}}{M_{sat}}\approx 1.14$. Temperature dependent resistivity measurements under hydrostatic pressure shows that transition temperature \textit{T$_C$} is suppressed down to 255 K for $p = 2.24$~GPa pressure with a suppression rate of $\sim -8.9$~K/GPa. The anisotropy fields and magnetocrystalline anisotropy constants are in reasonable agreement with density functional theory calculations. △ Less

Submitted 16 May, 2018; originally announced May 2018.

Comments: 12 pages, 12 figures

Journal ref: Phys. Rev. Materials 2, 084408 (2018)

Spatially-correlated Site Occupancy in the Nonstoichiometric Meta-stable ε-Al60Sm11 Phase during Devitrification of Al-10.2 at.% Sm Glasses

Authors: Lin Yang, Feng Zhang, Fan-Qiang Meng, Lin Zhou, Yang Sun, Xin Zhao, Zhuo Ye, Matthew J. Kramer, Cai-Zhuang Wang, Kai-Ming Ho

Abstract: A metastable ε-Al60Sm11 phase appears during the initial devitrification of as-quenched Al-10.2 at.% Sm glasses. The ε phase is nonstoichiometric in nature since Al occupation is observed on the 16f Sm lattice sites. Scanning transmission electron microscopic images reveal profound spatial correlation of Sm content on these sites, which cannot be explained by the "average crystal" description from… ▽ More A metastable ε-Al60Sm11 phase appears during the initial devitrification of as-quenched Al-10.2 at.% Sm glasses. The ε phase is nonstoichiometric in nature since Al occupation is observed on the 16f Sm lattice sites. Scanning transmission electron microscopic images reveal profound spatial correlation of Sm content on these sites, which cannot be explained by the "average crystal" description from Rietveld analysis of diffraction data. Thermodynamically favorable configurations, established by Monte Carlo (MC) simulations based on a cluster-expansion model, also give qualitatively different correlation functions from experimental observations. On the other hand, molecular dynamics simulations of the growth of ε-Al60Sm11 in undercooled liquid show that when the diffusion range of Sm is limited to ~ 4 Å, the correlation function of the as-grown crystal structure agrees well with that of the STEM images. Our results show that kinetic effects, especially the limited diffusivity of Sm atoms plays the fundamental role in determining the nonstoichiometric site occupancies of the ε-Al60Sm11 phase during the crystallization process. △ Less

Submitted 28 February, 2018; originally announced February 2018.

Comments: 13 pages, 10 figures, submitted

Observation of Al41Sm5: new evidence for structural hierarchy in Al-Sm alloys

Authors: Z. Ye, F. Meng, F. Zhang, Y. Sun, L. Yang, S. H. Zhou, R. E. Napolitano, M. I. Mendelev, R. T. Ott, M. J. Kramer, C. Z. Wang, K. M. Ho

Abstract: Using an effective genetic algorithm, we uncover the structure of a metastable Al41Sm5 phase that supplements its family sharing similar short-range orders. The phase evolves upon heating an amorphous Al-9.7at.%Sm ribbon, produced by melt-spinning. The dynamical phase selection is discussed with respect to the structural connections between the short-range packing motifs in the amorphous precursor… ▽ More Using an effective genetic algorithm, we uncover the structure of a metastable Al41Sm5 phase that supplements its family sharing similar short-range orders. The phase evolves upon heating an amorphous Al-9.7at.%Sm ribbon, produced by melt-spinning. The dynamical phase selection is discussed with respect to the structural connections between the short-range packing motifs in the amorphous precursor and those observed in the selected phases. The phase elucidated here is one of several newly discovered large-unit-cell phases found to form during devitrification from the glass in this binary system, further illustrating the power and efficiency of our approach, the important role of structural hierarchy in phase selection, and the richness of the metastable phase landscape accessible from the glassy structure. △ Less

Submitted 27 December, 2017; originally announced December 2017.

Simulation of alnico coercivity

Authors: Liqin Ke, Ralph Skomski, Todd D. Hoffmann, Lin Zhou, Wei Tang, Duane D. Johnson, Matthew J. Kramer, Iver E. Anderson, C. -Z. Wang

Abstract: Micromagnetic simulations of alnico show substantial deviations from Stoner-Wohlfarth behavior due to the unique size and spatial distribution of the rod-like Fe-Co phase formed during spinodal decomposition in an external magnetic field. The maximum coercivity is limited by single-rod effects, especially deviations from ellipsoidal shape, and by interactions between the rods. Both the exchange in… ▽ More Micromagnetic simulations of alnico show substantial deviations from Stoner-Wohlfarth behavior due to the unique size and spatial distribution of the rod-like Fe-Co phase formed during spinodal decomposition in an external magnetic field. The maximum coercivity is limited by single-rod effects, especially deviations from ellipsoidal shape, and by interactions between the rods. Both the exchange interaction between connected rods and magnetostatic interaction between rods are considered, and the results of our calculations show good agreement with recent experiments. Unlike systems dominated by magnetocrystalline anisotropy, coercivity in alnico is highly dependent on size, shape, and geometric distribution of the Fe-Co phase, all factors that can be tuned with appropriate chemistry and thermal-magnetic annealing. △ Less

Submitted 13 July, 2017; originally announced July 2017.

Journal ref: Applied Physics Letters, 111(2):022403 (2017)

Microstructural and magnetic property evolution with different heat-treatment conditions in an alnico alloy

Authors: Lin Zhou, Wei Tang, Liqin Ke, Jonathan D. Poplawsky, Iver E. Anderson, Matthew J. Kramer

Abstract: Further property enhancement of alnico, an attractive near-term, non-rare-earth permanent magnet alloy system, primarily composed of Al, Ni, Co, and Fe, relies on improved morphology control and size refinement of its complex spinodally decomposed nanostructure that forms during heat-treatment. Using a combination of transmission electron microscopy and atom probe tomography techniques, this study… ▽ More Further property enhancement of alnico, an attractive near-term, non-rare-earth permanent magnet alloy system, primarily composed of Al, Ni, Co, and Fe, relies on improved morphology control and size refinement of its complex spinodally decomposed nanostructure that forms during heat-treatment. Using a combination of transmission electron microscopy and atom probe tomography techniques, this study evaluates the magnetic properties and microstructures of an isotropic 32.4Fe-38.1Co-12.9Ni-7.3Al-6.4Ti-3.0Cu (wt.$\%$) alloy in terms of processing parameters such as annealing temperature, annealing time, application of an external magnetic field, as well as low-temperature "draw" annealing. Optimal spinodal morphology and spacing is formed within a narrow temperature and time range ($\sim 840 \unicode{x2103}$ and 10 min during thermal-magnetic annealing (MA). The ideal morphology is a mosaic structure consisting of periodically arrayed $\sim 40$ nm diameter (Fe-Co)-rich rods ($α_1$ phase) embedded in an (Al-Ni)-rich ($α_2$ phase) matrix. A Cu-enriched phase with a size of $\sim$ 3-5 nm is located at the corners of two adjacent $\{110\}$ facets of the $α_1$ phase. The MA process significantly increased remanence ($B_\text{r}$) ($\sim$ 40-70 $\%$) of the alloy due to biased elongation of the $α_1$ phase along the $\langle100\rangle$ crystallographic direction, which is closest in orientation to the applied magnetic field. The optimum magnetic properties of the alloy with an intrinsic coercivity ($H_\text{cj}$) of 1845 Oe and a maximum energy product ($BH_\text{max}$) of 5.9 MGOe were attributed to the uniformity of the mosaic structure. △ Less

Submitted 13 July, 2017; originally announced July 2017.

Journal ref: Acta Materialia, 133:73 (2017)

Electronic structure and magnetic properties in $T_2\text{AlB}_2$ ($T$ = Fe, Mn, Cr, Co, and Ni) and their alloys

Authors: Liqin Ke, Bruce N. Harmon, Matthew J. Kramer

Abstract: The electronic structure and intrinsic magnetic properties of $\text{Fe}_2\text{AlB}_2$-related compounds and their alloys have been investigated using density functional theory. For $\text{Fe}_2\text{AlB}_2$, the crystallographic $a$ axis is the easiest axis, which agrees with experiments. The magnetic ground state of $\text{Mn}_2\text{AlB}_2$ is found to be ferromagnetic in the basal $ab$ plane,… ▽ More The electronic structure and intrinsic magnetic properties of $\text{Fe}_2\text{AlB}_2$-related compounds and their alloys have been investigated using density functional theory. For $\text{Fe}_2\text{AlB}_2$, the crystallographic $a$ axis is the easiest axis, which agrees with experiments. The magnetic ground state of $\text{Mn}_2\text{AlB}_2$ is found to be ferromagnetic in the basal $ab$ plane, but antiferromagnetic along the $c$ axis. All $3d$ dopings considered decrease the magnetization and Curie temperature in $\text{Fe}_2\text{AlB}_2$. Electron doping with Co or Ni has a stronger effect on the decreasing of Curie temperature in $\text{Fe}_2\text{AlB}_2$ than hole doping with Mn or Cr. However, a larger amount of Mn doping on $\text{Fe}_2\text{AlB}_2$ promotes the ferromagnetic to antiferromagnetic transition. A very anisotropic magnetoelastic effect is found in $\text{Fe}_2\text{AlB}_2$: the magnetization has a much stronger dependence on the lattice parameter $c$ than on $a$ or $b$, which is explained by electronic-structure features near the Fermi level. Dopings of other elements on B and Al sites are also discussed. △ Less

Submitted 14 March, 2017; originally announced March 2017.

Comments: 10 pages, 9 figures, accepted by Phys. Rev. B

Journal ref: Phys. Rev. B, 95:104427 (2017)

Highly responsive ground state of PbTaSe$_2$: structural phase transition and evolution of superconductivity under pressure

Authors: Udhara Kaluarachchi, Yuhang Deng, Matthew F. Besser, Kewei Sun, Lin Zhou, Manh Cuong Nguyen, Zhujun Yuan, Chenglong Zhang, James S. Schilling, Matthew J. Kramer, Shuang Jia, Cai-Zhuang Wang, Kai-Ming Ho, Paul C. Canfield, Sergey L. Bud'ko

Abstract: Transport and magnetic studies of PbTaSe$_2$ under pressure suggest existence of two superconducting phases with the low temperature phase boundary at $\sim 0.25$ GPa that is defined by a very sharp, first order, phase transition. The first order phase transition line can be followed via pressure dependent resistivity measurements, and is found to be near 0.12 GPa near room temperature. Transmissi… ▽ More Transport and magnetic studies of PbTaSe$_2$ under pressure suggest existence of two superconducting phases with the low temperature phase boundary at $\sim 0.25$ GPa that is defined by a very sharp, first order, phase transition. The first order phase transition line can be followed via pressure dependent resistivity measurements, and is found to be near 0.12 GPa near room temperature. Transmission electron microscopy and x-ray diffraction at elevated temperatures confirm that this first order phase transition is structural and occurs at ambient pressure near $\sim 425$ K. The new, high temperature / high pressure phase has a similar crystal structure and slightly lower unit cell volume relative to the ambient pressure, room temperature structure. Based on first-principles calculations this structure is suggested to be obtained by shifting the Pb atoms from the $1a$ to $1e$ Wyckoff position without changing the positions of Ta and Se atoms. PbTaSe$_2$ has an exceptionally pressure sensitive, structural phase transition with $ΔT_s/ΔP \approx - 1700$ K/GPa near 4 K, this first order transition causes an $\sim 1$ K ($\sim 25 \%$) step - like decrease in $T_c$ as pressure is increased through 0.25 GPa. △ Less

Submitted 1 February, 2017; originally announced February 2017.

Journal ref: Phys. Rev. B 95, 224508 (2017)

Structural and ferromagnetic properties of an orthorhombic phase of MnBi stabilized with Rh additions

Authors: Valentin Taufour, Srinivasa Thimmaiah, Stephen March, Scott Saunders, Kewei Sun, Tej Nath Lamichhane, Matthew J. Kramer, Sergey L. Budko, Paul C. Canfield

Abstract: The article addresses the possibility of alloy elements in MnBi which may modify the thermodynamic stability of the NiAs-type structure without significantly degrading the magnetic properties. The addition of small amounts of Rh and Mn provides an improvement in the thermal stability with some degradation of the magnetic properties. The small amounts of Rh and Mn additions in MnBi stabilize an ort… ▽ More The article addresses the possibility of alloy elements in MnBi which may modify the thermodynamic stability of the NiAs-type structure without significantly degrading the magnetic properties. The addition of small amounts of Rh and Mn provides an improvement in the thermal stability with some degradation of the magnetic properties. The small amounts of Rh and Mn additions in MnBi stabilize an orthorhombic phase whose structural and magnetic properties are closely related to the ones of the previously reported high-temperature phase of MnBi (HT~MnBi). To date, the properties of the HT~MnBi, which is stable between $613$ and $719$~K, have not been studied in detail because of its transformation to the stable low-temperature MnBi (LT~MnBi), making measurements near and below its Curie temperature difficult. The Rh-stabilized MnBi with chemical formula Mn$_{1.0625-x}$Rh$_{x}$Bi [$x=0.02(1)$] adopts a new superstructure of the NiAs/Ni$_2$In structure family. It is ferromagnetic below a Curie temperature of $416$~K. The critical exponents of the ferromagnetic transition are not of the mean-field type but are closer to those associated with the Ising model in three dimensions. The magnetic anisotropy is uniaxial; the anisotropy energy is rather large, and it does not increase when raising the temperature, contrary to what happens in LT~MnBi. The saturation magnetization is approximately $3$~$μ_B$/f.u. at low temperatures. While this exact composition may not be application ready, it does show that alloying is a viable route to modifying the stability of this class of rare-earth-free magnet alloys. △ Less

Submitted 3 August, 2015; originally announced August 2015.

Comments: 9 pages, 10 figures

Journal ref: Phys. Rev. Applied 4, 014021 (2015)

Unconventional phase selection in high-driven systems: A complex metastable structure prevails over simple stable phases

Authors: Zhuo Ye, Feng Zhang, Yang Sun, Manh Cuong Nguyen, Mikhail I. Mendelev, Ryan T. Ott, Eun Soo Park, Matthew Besser, Matthew J. Kramer, Ze-Jun Ding, Cai-Zhuang Wang, Kai-Ming Ho

Abstract: Phase selection in deeply undercooled liquids and devitrified glasses during heating involves complex interplay between the barriers to nucleation and the ability for these nuclei to grow. During the devitrification of glassy alloys, complicated metastable structures often precipitate instead of simpler, more stable compounds. Here, we access this unconventional type of phase selections by investi… ▽ More Phase selection in deeply undercooled liquids and devitrified glasses during heating involves complex interplay between the barriers to nucleation and the ability for these nuclei to grow. During the devitrification of glassy alloys, complicated metastable structures often precipitate instead of simpler, more stable compounds. Here, we access this unconventional type of phase selections by investigating an Al-10%Sm system, where a complicated cubic structure first precipitates with a large lattice parameter of 1.4 nm. We not only solve the structure of this "big cubic" phase containing ~140 atoms but establish an explicit interconnection between the structural orderings of the amorphous alloy and the cubic phase, which provides a low-barrier nucleation pathway at low temperatures. The surprising rapid growth of the crystal is attributed to its high tolerance to point defects, which minimize the short-scale atomic rearrangements to form the crystal. Our study suggests a new scenario of devitrification, where phase transformation proceeds initially without partitioning through a complex intermediate crystal phase. △ Less

Submitted 30 January, 2015; originally announced February 2015.

Comments: 22 pages, 4 figures

Journal ref: Phys. Rev. Materials 1, 055601 (2017)

Crystalline 'Genes' in Metallic Liquids

Authors: Yang Sun, Feng Zhang, Zhuo Ye, Xiaowei Fang, Zejun Ding, Cai-Zhuang Wang, Mikhail I. Mendelev, Ryan T. Ott, M. J. Kramer, Kai-Ming Ho

Abstract: The underlying structural order that transcends the liquid, glass and crystalline states is identified using an efficient genetic algorithm (GA). GA identifies the most common energetically favorable packing motif in crystalline structures close to the alloy's Al-10 at.% Sm composition. These motifs are in turn compared to the observed packing motifs in the actual liquid structures using a cluster… ▽ More The underlying structural order that transcends the liquid, glass and crystalline states is identified using an efficient genetic algorithm (GA). GA identifies the most common energetically favorable packing motif in crystalline structures close to the alloy's Al-10 at.% Sm composition. These motifs are in turn compared to the observed packing motifs in the actual liquid structures using a cluster-alignment method which reveals the average topology. Conventional descriptions of the short-range order, such as Voronoi tessellation, are too rigid in their analysis of the configurational poly-types when describing the chemical and topological ordering during transition from undercooled metallic liquids to crystalline phases or glass. Our approach here brings new insight into describing mesoscopic order-disorder transitions in condensed matter physics. △ Less

Submitted 7 August, 2014; originally announced August 2014.

Journal ref: Scientific Reports, 6, 23734 (2016)

Stripe-like nanoscale structural phase separation and optimal inhomogeneity in superconducting BaPb$_{1-x}$Bi$_x$O$_3$

Authors: P. Giraldo-Gallo, Y. Zhang, C. Parra, H. C. Manoharan, M. R. Beasley, T. H. Geballe, M. J. Kramer, I. R. Fisher

Abstract: Structural phase separation in the form of partially disordered stripes, with characteristic length scales in the nanometer range, is observed for superconducting BaPb$_{1-x}$Bi$_x$O$_3$. The evolution of the superconducting coherence length with composition relative to the size of these stripes suggests an important role of the nanostructure in determining the shape of the superconducting dome. I… ▽ More Structural phase separation in the form of partially disordered stripes, with characteristic length scales in the nanometer range, is observed for superconducting BaPb$_{1-x}$Bi$_x$O$_3$. The evolution of the superconducting coherence length with composition relative to the size of these stripes suggests an important role of the nanostructure in determining the shape of the superconducting dome. It is proposed that the maximum $T_c$ is determined by a kind of "optimal inhomogeneity", characterized by a crossover from an inhomogeneous macroscopic superconductor to a granular superconductor for which phase fluctuations suppress $T_c$. △ Less

Submitted 28 July, 2014; originally announced July 2014.

Journal ref: Nature Communications 6, 8231 (2015)

Field-Tuned Superconductor-Insulator Transition in BaPb1-xBixO3

Authors: P. Giraldo-Gallo, H. Lee, Y. Zhang, M. J. Kramer, M. R. Beasley, T. H. Geballe, I. R. Fisher

Abstract: BaPb$_{1-x}$Bi$_x$O$_3$ is found to exhibit a field-tuned superconductor to insulator transition for Bi compositions 0.24 $\leq x \leq$ 0.29. The magnetoresistance of optimally doped samples manifests a temperature-independent crossing point and scaling of the form $ρ(T,H)=ρ_c F(|H-H_{c}|T^{-1/zν})$, where $H_c$ is the field determined by the temperature-independent crossing point, and $zν$ = 0.69… ▽ More BaPb$_{1-x}$Bi$_x$O$_3$ is found to exhibit a field-tuned superconductor to insulator transition for Bi compositions 0.24 $\leq x \leq$ 0.29. The magnetoresistance of optimally doped samples manifests a temperature-independent crossing point and scaling of the form $ρ(T,H)=ρ_c F(|H-H_{c}|T^{-1/zν})$, where $H_c$ is the field determined by the temperature-independent crossing point, and $zν$ = 0.69 $\pm$ 0.03. High resolution transmission electron microscopy measurements reveal a complex intergrown nanostructure comprising tetragonal and orthorhombic polymorphs. Data are analyzed in terms of both a classical effective medium theory and a field-tuned quantum phase transition, neither of which provides a completely satisfactory explanation for this remarkable phenomenology. △ Less

Submitted 8 May, 2012; v1 submitted 12 December, 2011; originally announced December 2011.

Journal ref: Phys. Rev. B 85, 174503 (2012)

Stabilization of an ambient pressure, collapsed tetragonal phase in CaFe2As2 and tuning of the orthorhombic / antiferromagnetic transition temperature by over 70 K by control of nano-precipitates

Authors: S. Ran, S. L. Bud'ko, D. K. Pratt, A. Kreyssig, M. G. Kim, M. J. Kramer, D. H. Ryan, W. N. Rowan-Weetaluktuk, Y. Furukawa, B. Roy, A. I. Goldman, P. C. Canfield

Abstract: We have found a remarkably large response of the transition temperature of CaFe2As2 single crystals grown out of excess FeAs to annealing / quenching temperature. Whereas crystals that are annealed at 400 C exhibit a first order phase transition from a high temperature tetragonal to a low temperature orthorhombic and antiferromagnetic state near 170 K, crystals that have been quenched from 960 C e… ▽ More We have found a remarkably large response of the transition temperature of CaFe2As2 single crystals grown out of excess FeAs to annealing / quenching temperature. Whereas crystals that are annealed at 400 C exhibit a first order phase transition from a high temperature tetragonal to a low temperature orthorhombic and antiferromagnetic state near 170 K, crystals that have been quenched from 960 C exhibit a transition from a high temperature tetragonal phase to a low temperature, non-magnetic, collapsed tetragonal phase below 100 K. By use of temperature dependent electrical resistivity, magnetic susceptibility, X-ray diffraction, Mossbauer spectroscopy and nuclear magnetic resonance measurements we have been able to demonstrate that the transition temperature can be reduced in a monotonic fashion by varying the annealing / quenching temperature from 400 to 850 C with the low temperature state remaining antiferromagnetic for transition temperatures larger than 100 K and becoming collapsed tetragonal / non-magnetic for transition temperatures below 90 K. This suppression of the orthorhombic / antiferromagnetic phase transition and its ultimate replacement with the collapsed tetragonal / non-magnetic phase is similar to what has been observed for CaFe2As2 under hydrostatic pressure. Transmission electron microscopy studies indicate that there is a temperature dependent, width of formation of CaFe2As2 with a decreasing amount of excess Fe and As being soluble in the single crystal at lower annealing temperatures. For samples quenched from 960 C there is a fine (of order 10 nm), semi-uniform distribution of precipitate that can be associated with an average strain field whereas for samples annealed at 400 C the excess Fe and As form mesoscopic grains that induce little strain throughout the CaFe2As2 lattice. △ Less

Submitted 24 January, 2011; originally announced January 2011.

Anomalous scattering in superconducting indium-doped tin telluride

Authors: A. S. Erickson, T. H. Geballe, I. R. Fisher, Y. Q. Wu, M. J. Kramer

Abstract: Results of resistivity, Hall effect, magnetoresistance, susceptibility and heat capacity measurements are presented for single crystals of indium-doped tin telluride with compositions Sn$_{.988-x}$In$_x$Te where $0 \leq x \leq 8.4 %$, along with microstructural analysis based on transmission electron microscopy. For small indium concentrations, $x \leq 0.9 %$ the material does not superconduct abo… ▽ More Results of resistivity, Hall effect, magnetoresistance, susceptibility and heat capacity measurements are presented for single crystals of indium-doped tin telluride with compositions Sn$_{.988-x}$In$_x$Te where $0 \leq x \leq 8.4 %$, along with microstructural analysis based on transmission electron microscopy. For small indium concentrations, $x \leq 0.9 %$ the material does not superconduct above 0.3 K, and the transport properties are consistent with simple metallic behavior. For $x \geq 2.7 %$ the material exhibits anomalous low temperature scattering and for $x \geq 6.1 %$ bulk superconductivity is observed with critical temperatures close to 2 K. Intermediate indium concentrations $2.7% \leq x \leq 3.8%$ do not exhibit bulk superconductivity above 0.7 K. Susceptibility data indicate the absence of magnetic impurities, while magnetoresistance data are inconsistent with localization effects, leading to the conclusion that indium-doped SnTe is a candidate charge Kondo system, similar to thallium-doped PbTe. △ Less

Submitted 1 September, 2010; originally announced September 2010.

Comments: 12 pages, 11 figures

Multiple charge density wave transitions in Gd$_2$Te$_5$

Authors: K. Y. Shin, N. Ru, C. L. Condron, Y. Q. Wu, M. J. Kramer, M. F. Toney, I. R. Fisher

Abstract: Diffraction measurements performed via transmission electron microscopy and high resolution X-ray scattering reveal two distinct charge density wave transitions in Gd$_2$Te$_5$ at $T_{c1}$ = 410(3) and $T_{c2}$ = 532(3) K, associated with the \textit{on}-axis incommensurate lattice modulation and \textit{off}-axis commensurate lattice modulation respectively. Analysis of the temperature dependen… ▽ More Diffraction measurements performed via transmission electron microscopy and high resolution X-ray scattering reveal two distinct charge density wave transitions in Gd$_2$Te$_5$ at $T_{c1}$ = 410(3) and $T_{c2}$ = 532(3) K, associated with the \textit{on}-axis incommensurate lattice modulation and \textit{off}-axis commensurate lattice modulation respectively. Analysis of the temperature dependence of the order parameters indicates a non-vanishing coupling between these two distinct CDW states. △ Less

Submitted 15 August, 2008; originally announced August 2008.

Comments: 4 pages, 4 figures

Charge density wave formation in $R_{2}$Te$_{5}$ ($R$=Nd, Sm and Gd)

Authors: K. Y. Shin, J. Laverock, Y. Q. Wu, C. L. Condron, M. F. Toney, S. B. Dugdale, M. J. Kramer, I. R. Fisher

Abstract: The rare earth ($R$) tellurides $R_2$Te$_5$ have a crystal structure intermediate between that of $R$Te$_2$ and $R$Te$_3$, consisting of alternating single and double Te planes sandwiched between $R$Te block layers. We have successfully grown single crystals of Nd$_2$Te$_5$, Sm$_2$Te$_5$ and Gd$_2$Te$_5$ from a self flux, and describe here the first evidence for charge density wave formation in… ▽ More The rare earth ($R$) tellurides $R_2$Te$_5$ have a crystal structure intermediate between that of $R$Te$_2$ and $R$Te$_3$, consisting of alternating single and double Te planes sandwiched between $R$Te block layers. We have successfully grown single crystals of Nd$_2$Te$_5$, Sm$_2$Te$_5$ and Gd$_2$Te$_5$ from a self flux, and describe here the first evidence for charge density wave formation in these materials. The superlattice patterns for all three compounds are relatively complex, consisting at room temperature of at least two independent wavevectors. Consideration of the electronic structure indicates that to a large extent these wave vectors are separately associated with sheets of the Fermi surface which are principally derived from the single and double Te layers. △ Less

Submitted 12 December, 2007; originally announced December 2007.

Comments: 10 pages, 6 figures

Superconductivity in MgB_2 doped with Ti and C

Authors: R. H. T. Wilke, S. L. Bud'ko, P. C. Canfield, M. J. Kramer, Y. Q. Wu, D. K. Finnemore, R. J. Suplinskas, J. V. Marzik, S. T. Hannahs

Abstract: Measurements of the superconducting upper critical field, H_{c2}, and critical current density, J_c, have been carried out for MgB_2 doped with Ti and/or C in order to explore the problems encountered if these dopants are used to enhance the superconducting performance. Carbon replaces boron in the MgB_2 lattice and apparently shortens the electronic mean free path thereby raising H_c2. Titanium… ▽ More Measurements of the superconducting upper critical field, H_{c2}, and critical current density, J_c, have been carried out for MgB_2 doped with Ti and/or C in order to explore the problems encountered if these dopants are used to enhance the superconducting performance. Carbon replaces boron in the MgB_2 lattice and apparently shortens the electronic mean free path thereby raising H_c2. Titanium forms precipitates of either TiB or TiB_2 that enhance the flux pinning and raise J_c. Most of these precipitates are intra-granular in the MgB_2 phase. If approximately 0.5% Ti and approximately 2% C are co-deposited with B to form doped boron fibers and these fibers are in turn reacted in Mg vapor to form MgB_2, the resulting superconductor has H_{c2}(T=0) ~ 25 T and J_c ~ 10,000 A/cm**2 at 5 K and 2.2 T. △ Less

Submitted 22 November, 2004; originally announced November 2004.

Comments: 11 pages, 10 figures

Intra-granular Ti precipitates in MgB2

Authors: M. J. Kramer, S. L. Bud'ko, P. C. Canfield, R. H. T. Wilke, D. K. Finnemore, R. J. Suplinskas

Abstract: Superconducting magnesium diboride has been prepared with intra-granular TiB precipitates that have appropriate size and spacing for the pinning of superconducting vortices. The TiB particles have a size ranging from 1 nm to 20 nm and a spacing about 5 times as large. By co-depositing Ti and B on a commercial carbon coated silicon carbide substrate with chemical vapor deposition methods, it was… ▽ More Superconducting magnesium diboride has been prepared with intra-granular TiB precipitates that have appropriate size and spacing for the pinning of superconducting vortices. The TiB particles have a size ranging from 1 nm to 20 nm and a spacing about 5 times as large. By co-depositing Ti and B on a commercial carbon coated silicon carbide substrate with chemical vapor deposition methods, it was possible to obtain a starting fiber with Ti well dispersed in the B. Reacting these fibers in a Mg vapor then transformed the fiber into a superconductor capable of carrying 10,000 A/cm^2 at 25K and 1 T. The Ti-B bonds are strong enough that there is relatively little migration of the Ti as the MgB2 grains form around the TiB precipitates. TiB2 precipitates, if they are present, can not be seen in the selected area diffraction pictures that show the TiB precipitates. △ Less

Submitted 21 February, 2003; originally announced February 2003.

Comments: 6 pages, 4 figures. Applied Physics Letters (ssubmitted)