Showing 1–48 of 48 results for author: Kondic, L

Phase-field modeling of colloid-polymer mixtures in microgravity

Authors: Lauren Barnes, Boris Khusid, Lou Kondic, William V. Meyer, Anand U. Oza

Abstract: Colloid-polymer mixtures are an archetype for modeling phase transition processes, as they a exhibit low-density gas phase, high-density crystalline phase and an intervening liquid phase. While their equilibrium behavior has been studied extensively, the role of hydrodynamics in driving their phase separation is not yet understood. We present a theoretical model that describes hydrodynamic interac… ▽ More Colloid-polymer mixtures are an archetype for modeling phase transition processes, as they a exhibit low-density gas phase, high-density crystalline phase and an intervening liquid phase. While their equilibrium behavior has been studied extensively, the role of hydrodynamics in driving their phase separation is not yet understood. We present a theoretical model that describes hydrodynamic interactions in colloid-polymer mixtures in a microgravity environment. Our phase-field model consists of the Cahn-Hilliard equation, which describes phase separation processes in multicomponent mixtures, coupled with the Stokes equation for viscous fluid flow. We account for the dependence of the suspension viscosity on the colloid concentration, and the so-called Korteweg stresses that arise at the interfaces of colloidal phases. We process video microscopy images from NASA's Binary Colloid Alloy Test (BCAT) experiments, which were performed on the International Space Station. While terrestrial experiments would be dominated by gravitational forces and buoyancy-driven flows, the microgravity environment of the BCAT experiments allows for the visualization of phase separation by low interfacial tension, and thus enables a quantitative comparison between experiment and our model predictions. △ Less

Submitted 17 December, 2024; originally announced December 2024.

On the origins of reverse Janssen effect

Authors: Srujal Shah, Ana Maria Mosquera Gomez, Payman Jalali, Lou Kondic

Abstract: We consider experimentally and computationally the phenomenon of the reverse Janssen effect, involving the counterintuitive finding that the force on the base of a column containing granular particles may be larger than the weight of the granular material itself. This finding is in contrast to the common Janssen effect, for which the force on the base is smaller than the particle weight, illustrat… ▽ More We consider experimentally and computationally the phenomenon of the reverse Janssen effect, involving the counterintuitive finding that the force on the base of a column containing granular particles may be larger than the weight of the granular material itself. This finding is in contrast to the common Janssen effect, for which the force on the base is smaller than the particle weight, illustrating one of the best-known differences between granular and liquid systems. We find that the reverse Janssen effect is strongly influenced by the pouring protocol: under Earth's gravitational field, we find that the reverse Janssen effect is strongly and consistently influenced by the pouring height, as well as by (to somewhat lesser degree) pouring flux. Pouring grains from the height measured in tens of particle diameters leads to a reverse Janssen effect that is an order of magnitude stronger than the one found for small pouring heights of few particle diameters. This influence of the particles' delivery protocol allows for the development of a better understanding of the general features of the reverse Janssen effect and of the comparison between experiments and simulations reported in this and previous works. △ Less

Submitted 6 November, 2024; v1 submitted 19 August, 2024; originally announced August 2024.

On the fractal dimension of non-Newtonian Hele-Shaw flow subject to Saffman-Taylor instability

Authors: J. Adriazola, B. Gu, L. Cummings, L. Kondic

Abstract: We introduce a discrete numerical method based on the diffusion-limited aggregation (DLA) approach to simulate two-fluid Hele-Shaw flow subject to the Saffman-Taylor interfacial instability, in the case where the displaced fluid is non-Newtonian. Focusing on fluids for which the most relevant non-Newtonian aspect of the thin-gap flow is shear-thinning, we introduce a history-dependent aspect into… ▽ More We introduce a discrete numerical method based on the diffusion-limited aggregation (DLA) approach to simulate two-fluid Hele-Shaw flow subject to the Saffman-Taylor interfacial instability, in the case where the displaced fluid is non-Newtonian. Focusing on fluids for which the most relevant non-Newtonian aspect of the thin-gap flow is shear-thinning, we introduce a history-dependent aspect into the algorithm, modeling shear-rate-dependent fluid viscosity. The main finding is that the morphology of the emerging patterns, characterized by the fractal dimension, is modified in a nontrivial manner by the shear-thinning nature of the displaced fluid. In particular, we consistently find that shear-thinning leads to the formation of patterns characterized by a smaller fractal dimension, compared to the corresponding Newtonian fluid. △ Less

Submitted 12 November, 2024; v1 submitted 8 July, 2024; originally announced July 2024.

Using Thermal Crowding to Direct Pattern Formation on the Nanoscale

Authors: Ryan H. Allaire, Linda J. Cummings, Lou Kondic

Abstract: Metal films and other geometries of nanoscale thickness, when exposed to laser irradiation, melt and evolve as fluids as long as their temperature is sufficiently high. This evolution often leads to pattern formation, which may be influenced strongly by material parameters that are temperature dependent. In addition, the laser heat absorption itself depends on the time-dependent metal thickness. S… ▽ More Metal films and other geometries of nanoscale thickness, when exposed to laser irradiation, melt and evolve as fluids as long as their temperature is sufficiently high. This evolution often leads to pattern formation, which may be influenced strongly by material parameters that are temperature dependent. In addition, the laser heat absorption itself depends on the time-dependent metal thickness. Self-consistent modeling of evolving metal films shows that, by controlling the amount and geometry of deposited metal, one could control the instability development. In particular, depositing additional metal leads to elevated temperatures through the `thermal crowding' effect, which strongly influences the metal film evolution. This influence may proceed via disjoint metal geometries, by heat diffusion through the underlying substrate. Fully self-consistent modeling focusing on the dominant effects, as well as accurate time-dependent simulations, allow us to describe the main features of thermal crowding and provide a route to control fluid instabilities and pattern formation on the nanoscale. △ Less

Submitted 23 May, 2024; originally announced May 2024.

Large FCC colloidal crystals under microgravity

Authors: Qian Lei, Boris Khusid, Lou Kondic, Paul M. Chaikin, Andrew D. Hollingsworth, Alton J. Reich, William V. Meyer

Abstract: Here we report the results of microgravity experiments performed on the International Space Station (ISS) to study crystallized, metastable colloidal liquids in the region of the hard sphere phase diagram that has been found to be glassy on Earth. Using confocal microscopy, we observed the self-assembly of high density, three-dimensional colloidal crystals from micron-size hard spheres suspended w… ▽ More Here we report the results of microgravity experiments performed on the International Space Station (ISS) to study crystallized, metastable colloidal liquids in the region of the hard sphere phase diagram that has been found to be glassy on Earth. Using confocal microscopy, we observed the self-assembly of high density, three-dimensional colloidal crystals from micron-size hard spheres suspended within a fluid medium. The largest face-centered cubic (FCC) phase measured 27 x 1.5 x 0.15 mm. From a practical aspect, the fact that a single, topological defect-free FCC colloidal crystal can be grown in microgravity and the crystal returned from orbit suggests new routes for manufacturing colloidal devices, particularly optical elements in space. △ Less

Submitted 11 July, 2024; v1 submitted 10 April, 2024; originally announced April 2024.

Comments: 16 pages, 6 figures

Intruder in a two-dimensional granular system: statics and dynamics of force networks in an experimental system experiencing stick-slip dynamics

Authors: R. Basak, R. Kozlowski, L. A. Pugnaloni, M. Kramar, E. S. Socolar, C. M. Carlevaro, L. Kondic

Abstract: In quasi-two-dimensional experiments with photoelastic particles confined to an annular region, an intruder constrained to move in a circular path halfway between the annular walls experiences stick-slip dynamics. We discuss the response of the granular medium to the driven intruder, focusing on the evolution of the force network during sticking periods. Because the available experimental data doe… ▽ More In quasi-two-dimensional experiments with photoelastic particles confined to an annular region, an intruder constrained to move in a circular path halfway between the annular walls experiences stick-slip dynamics. We discuss the response of the granular medium to the driven intruder, focusing on the evolution of the force network during sticking periods. Because the available experimental data does not include precise information about individual contact forces, we use an approach developed in our previous work (Basak et al, J. Eng. Mechanics (2021)) based on networks constructed from measurements of the integrated strain magnitude on each particle. These networks are analyzed using topological measures based on persistence diagrams, revealing that force networks evolve smoothly but in a nontrivial manner throughout each sticking period, even though the intruder and granular particles are stationary. Characteristic features of persistence diagrams show identifiable changes as a slip is approaching, indicating the existence of slip precursors. Key features of the dynamics are similar for granular materials composed of disks or pentagons, but some details are consistently different. In particular, we find significantly larger fluctuations of the measures computed based on persistence diagrams, and therefore of the underlying networks, for systems of pentagonal particles. △ Less

Submitted 24 July, 2023; originally announced July 2023.

Active coating of a water drop by an oil film using a MHz-frequency surface acoustic wave

Authors: Avital Reizman, Amihai Horesh, Lou Kondic, Ofer Manor

Abstract: We employ a millimeter-scale piezoelectric acoustic actuator, which generates MHz-frequency surface acoustic waves (SAWs) in a solid substrate, to actively coat a drop of water by a macroscopic film of silicon oil as a paradigm for a small scale and low power coating system. We build upon previous studies on SAW induced dynamic wetting of a solid substrate, also known as the acoustowetting phenome… ▽ More We employ a millimeter-scale piezoelectric acoustic actuator, which generates MHz-frequency surface acoustic waves (SAWs) in a solid substrate, to actively coat a drop of water by a macroscopic film of silicon oil as a paradigm for a small scale and low power coating system. We build upon previous studies on SAW induced dynamic wetting of a solid substrate, also known as the acoustowetting phenomena, to actively drive a model low surface-energy liquid -- silicon oil -- coat a model liquid object -- a sessile drop of water. The oil film spreads along the path of the propagating SAW and comes in contact with the drop, which is placed in its path. The intensity of the SAW determines the rate and the extent to which a macroscopically thick film of oil will climb over the drop to partially or fully cover its surface. The dynamic wetting of the drop by the oil film is governed by a balance between acoustic, capillary, and gravitational contributions. Introducing a water drop as an object to be coated indicates the opportunity to coat liquid phase objects by employing SAWs and demonstrates that oil films which are actuated by SAWs may traverse curved objects and liquid surfaces. △ Less

Submitted 22 January, 2023; originally announced January 2023.

Stochastic methods for slip prediction in a sheared granular system

Authors: Philip Bretz, Lou Kondic, Miro Kramar

Abstract: We consider a sheared granular system experiencing intermittent dynamics of stick-slip type via discrete element simulations. The considered setup consists of a two-dimensional system of soft frictional particles sandwiched between solid walls, one of which is exposed to a shearing force. The slip events are detected using stochastic state space models applied to various measures describing the sy… ▽ More We consider a sheared granular system experiencing intermittent dynamics of stick-slip type via discrete element simulations. The considered setup consists of a two-dimensional system of soft frictional particles sandwiched between solid walls, one of which is exposed to a shearing force. The slip events are detected using stochastic state space models applied to various measures describing the system. We show that the measures describing the forces between the particles provide earlier detection of an upcoming slip event than the measures based solely on the wall movement. By comparing the detection times obtained from the considered measures, we observe that a typical slip event starts with a local change in the force network. However, some local changes do not spread globally over the force network. For the changes that become global, we find a sharp critical value for their size. If the size of a global change exceeds the critical value, then it triggers a slip event; if it does not, then a much weaker micro-slip follows. Quantification of the changes in the force network is made possible by formulating clear and precise measures describing their static and dynamic properties. △ Less

Submitted 20 October, 2022; originally announced October 2022.

Comments: 14 pages, 13 figures

On intermittency in sheared granular systems

Authors: Miroslav Kramar, Chao Cheng, Rituparna Basak, Lou Kondic

Abstract: We consider a system of granular particles, modeled by two dimensional frictional elastic disks, that is exposed to externally applied time-dependent shear stress in a planar Couette geometry. We concentrate on the external forcing that produces intermittent dynamics of stick-slip type. In this regime, the top wall remains almost at rest until the applied stress becomes sufficiently large, and the… ▽ More We consider a system of granular particles, modeled by two dimensional frictional elastic disks, that is exposed to externally applied time-dependent shear stress in a planar Couette geometry. We concentrate on the external forcing that produces intermittent dynamics of stick-slip type. In this regime, the top wall remains almost at rest until the applied stress becomes sufficiently large, and then it slips. We focus on the evolution of the system as it approaches a slip event. Our main finding is that there are two distinct groups of measures describing system behavior before a slip event. The first group consists of global measures defined as system-wide averages at a fixed time. Typical examples of measures in this group are averages of the normal or tangent forces acting between the particles, system size and number of contacts between the particles. These measures do not seem to be sensitive to an approaching slip event. On average, they tend to increase linearly with the force pulling the spring. The second group consists of the time-dependent measures that quantify the evolution of the system on a micro (particle) or mesoscale. Measures in this group first quantify the temporal differences between two states and only then aggregate them to a single number. For example, Wasserstein distance quantitatively measures the changes of the force network as it evolves in time while the number of broken contacts quantifies the evolution of the contact network. The behavior of the measures in the second group changes dramatically before a slip event starts. They increase rapidly as a slip event approaches, indicating a significant increase in fluctuations of the system before a slip event is triggered. △ Less

Submitted 20 April, 2022; v1 submitted 21 December, 2021; originally announced December 2021.

Network-based membrane filters: Influence of network and pore size variability on filtration performance

Authors: Binan Gu, Lou Kondic, Linda J. Cummings

Abstract: We model porous membrane filters as networks of connected cylindrical pores via a random network generation protocol, and their initial pore radii via a uniform distribution of widths that vary about some mean value. We investigate the influence of network and pore size (radius) variations on the performance of membrane filters that undergo adsorptive fouling. We find that membrane porosity variat… ▽ More We model porous membrane filters as networks of connected cylindrical pores via a random network generation protocol, and their initial pore radii via a uniform distribution of widths that vary about some mean value. We investigate the influence of network and pore size (radius) variations on the performance of membrane filters that undergo adsorptive fouling. We find that membrane porosity variations, independently of whether induced by variations of the pore radii or of the random pore network, are an important factor determining membrane filter performance. Network and pore size variations still play a role, in particular if pore radii variations are significant. To quantify the influence of these variations, we compare the performance metrics of networks built from pores of variable radii to their (equal porosity) counterparts built from pores of uniform radius. We show that the effect of pore radii variations is to increase throughput, but also to reduce foulant control. △ Less

Submitted 24 February, 2022; v1 submitted 28 October, 2021; originally announced November 2021.

MSC Class: 34B45; 76S05; 00A69

Two approaches to quantification of force networks in particulate systems

Authors: Rituparna Basak, C. Manuel Carlevaro, Ryan Kozlowski, Chao Cheng, Luis A. Pugnaloni, Miroslav Kramar, Hu Zheng, Joshua E. S. Socolar, Lou Kondic

Abstract: The interactions between particles in particulate systems are organized in `force networks', mesoscale features that bridge between the particle scale and the scale of the system as a whole. While such networks are known to be crucial in determining the system wide response, extracting their properties, particularly from experimental systems, is difficult due to the need to measure the interpartic… ▽ More The interactions between particles in particulate systems are organized in `force networks', mesoscale features that bridge between the particle scale and the scale of the system as a whole. While such networks are known to be crucial in determining the system wide response, extracting their properties, particularly from experimental systems, is difficult due to the need to measure the interparticle forces. In this work, we show by analysis of the data extracted from simulations that such detailed information about interparticle forces may not be necessary, as long as the focus is on extracting the most dominant features of these networks. The main finding is that a reasonable understanding of the time evolution of force networks can be obtained from incomplete information such as total force on the particles. To compare the evolution of the networks based on the completely known particle interactions and the networks based on incomplete information (total force each grain) we use tools of algebraic topology. In particular we will compare simple measures defined on persistence diagrams that provide useful summaries of the force network features. △ Less

Submitted 24 February, 2021; originally announced February 2021.

Correlating the force network evolution and dynamics in slider experiments

Authors: Chao Cheng, Aghil Abed Zadeh, Lou Kondic

Abstract: The experiments involving a slider moving on top of granular media consisting of photoelastic particles in two dimensions have uncovered elaborate dynamics that may vary from continuous motion to crackling, periodic motion, and stick-slip type of behavior. We establish that there is a clear correlation between the slider dynamics and the response of the force network that spontaneously develop in… ▽ More The experiments involving a slider moving on top of granular media consisting of photoelastic particles in two dimensions have uncovered elaborate dynamics that may vary from continuous motion to crackling, periodic motion, and stick-slip type of behavior. We establish that there is a clear correlation between the slider dynamics and the response of the force network that spontaneously develop in the granular system. This correlation is established by application of the persistence homology that allows for formulation of objective measures for quantification of time-dependent force networks. We find that correlation between the slider dynamics and the force network properties is particularly strong in the dynamical regime characterized by well-defined stick-slip type of dynamics. △ Less

Submitted 13 January, 2021; originally announced January 2021.

Dielectrowetting of a thin nematic liquid crystal layer

Authors: Ensela Mema, Lou Kondic, Linda J. Cummings

Abstract: We consider a mathematical model that describes the flow of a Nematic Liquid Crystal (NLC) film placed on a flat substrate, across which a spatially-varying electric potential is applied. Due to their polar nature, NLC molecules interact with the (nonuniform) electric field generated, leading to instability of a flat film. Implementation of the long wave scaling leads to a partial differential equ… ▽ More We consider a mathematical model that describes the flow of a Nematic Liquid Crystal (NLC) film placed on a flat substrate, across which a spatially-varying electric potential is applied. Due to their polar nature, NLC molecules interact with the (nonuniform) electric field generated, leading to instability of a flat film. Implementation of the long wave scaling leads to a partial differential equation that predicts the subsequent time evolution of the thin film. This equation is coupled to a boundary value problem that describes the interaction between the local molecular orientation of the NLC (the director field) and the electric potential. We investigate numerically the behavior of an initially flat film for a range of film heights and surface anchoring conditions. △ Less

Submitted 17 November, 2020; originally announced November 2020.

Journal ref: Phys. Rev. E 103, 032702 (2021)

Effects of spatially-varying substrate anchoring on instabilities and dewetting of thin Nematic Liquid Crystal films

Authors: M. Lam, L. Kondic, L. Cummings

Abstract: Partially wetting nematic liquid crystal (NLC) films on substrates are unstable to dewetting-type instabilities due to destablizing solid/NLC interaction forces. These instabilities are modified by the nematic nature of the films, which influences the effective solid/NLC interaction. In this work, we focus on the influence of imposed substrate anchoring on the instability development. The analysis… ▽ More Partially wetting nematic liquid crystal (NLC) films on substrates are unstable to dewetting-type instabilities due to destablizing solid/NLC interaction forces. These instabilities are modified by the nematic nature of the films, which influences the effective solid/NLC interaction. In this work, we focus on the influence of imposed substrate anchoring on the instability development. The analysis is carried out within a long-wave formulation based on the Leslie-Ericksen description of NLC films. Linear stability analysis of the resulting equations shows that some features of the instability, such as emerging wavelengths, may not be influenced by the imposed substrate anchoring. Going further into the nonlinear regime, considered via large-scale GPU-based simulations, shows however that nonlinear effects may play an important role, in particular in the case of strong substrate anchoring anisotropy. Our simulations show that instability of the film develops in two stages: the first stage involves formation of ridges that are perpendicular to the local anchoring direction; and the second involves breakup of these ridges and formation of drops, whose final distribution is influenced by the anisotropy imposed by the substrate. Finally, we show that imposing more complex substrate anisotropy patterns allows us to reach basic understanding of the influence of substrate-imposed defects in director orientation on the instability evolution. △ Less

Submitted 27 September, 2020; originally announced September 2020.

Journal ref: Soft Matter, Vol. 16, 10187 (2020)

Failure of confined granular media due to pullout of an intruder: From force networks to a system wide response

Authors: Srujal Shah, Chao Cheng, Payman Jalali, Lou Kondic

Abstract: We investigate computationally the pullout of a spherical intruder initially buried at the bottom of a granular column. The intruder starts to move out of the granular bed once the pulling force reaches a critical value, leading to material failure. The failure point is found to depend on the diameter of the granular column, pointing out the importance of particle-wall interaction in determining t… ▽ More We investigate computationally the pullout of a spherical intruder initially buried at the bottom of a granular column. The intruder starts to move out of the granular bed once the pulling force reaches a critical value, leading to material failure. The failure point is found to depend on the diameter of the granular column, pointing out the importance of particle-wall interaction in determining the material response. Discrete element simulations show that prior to failure, the contact network is essentially static, with only minor rearrangements of the particles. However, the force network, which includes not only the contact information, but also the information about the interaction strength, undergoes a nontrivial evolution. An initial insight is reached by considering the relative magnitudes of normal and tangential forces between the particles, and in particular the proportion of contacts that reach Coulomb threshold. More detailed understanding of the processes leading to failure is reached by the analysis of both spatial and temporal properties of the force network using the tools of persistent homology. We find that the forces between the particles undergo intermittent temporal variations ahead of the failure. In addition to this temporal intermittency, the response of the force network is found to be spatially dependent and influenced by proximity to the intruder. Furthermore, the response is modified significantly by the interaction strength, with the relevant measures describing the response showing differing behavior for the contacts characterized by large interaction forces. △ Less

Submitted 17 May, 2020; originally announced May 2020.

Journal ref: Soft Matter, Vol. 16, 7685 (2020)

Intruder in a two-dimensional granular system: Effects of dynamic and static basal friction on stick-slip and clogging dynamics

Authors: C. Manuel Carlevaro, Ryan Kozlowski, Luis A. Pugnaloni, Hu Zheng, Joshua E. S. Socolar, Lou Kondic

Abstract: We discuss the results of simulations of an intruder pulled through a two-dimensional granular system by a spring, using a model designed to lend insight into the experimental findings described by Kozlowski et al. [Phys. Rev. E, 100, 032905 (2019)]. In that previous study the presence of basal friction between the grains and the base was observed to change the intruder dynamics from clogging to s… ▽ More We discuss the results of simulations of an intruder pulled through a two-dimensional granular system by a spring, using a model designed to lend insight into the experimental findings described by Kozlowski et al. [Phys. Rev. E, 100, 032905 (2019)]. In that previous study the presence of basal friction between the grains and the base was observed to change the intruder dynamics from clogging to stick-slip. Here we first show that our simulation results are in excellent agreement with the experimental data for a variety of experimentally accessible friction coefficients governing interactions of particles with each other and with boundaries. Then, we use simulations to explore a broader range of parameter space, focusing on the friction between the particles and the base. We consider a range of both static and dynamic basal friction coefficients, which are difficult to vary smoothly in experiments. The simulations show that dynamic friction strongly affects the stick-slip behaviour when the coefficient is decreased below 0.1, while static friction plays only a marginal role in the intruder dynamics. △ Less

Submitted 15 October, 2019; originally announced October 2019.

Comments: 19 pages, 10 figures, 2 tables

Journal ref: Phys. Rev. E 101, 012909 (2020)

Dynamics of a grain-scale intruder in a two-dimensional granular medium with and without basal friction

Authors: Ryan Kozlowski, C. Manuel Carlevaro, Karen E. Daniels, Lou Kondic, Luis A. Pugnaloni, Joshua E. S. Socolar, Hu Zheng, Robert P. Behringer

Abstract: We report on a series of experiments in which a grain-sized intruder is pushed by a spring through a 2D granular material comprised of photoelastic disks in a Couette geometry. We study the intruder dynamics as a function of packing fraction for two types of supporting substrates: a frictional glass plate and a layer of water for which basal friction forces are negligible. We observe two dynamical… ▽ More We report on a series of experiments in which a grain-sized intruder is pushed by a spring through a 2D granular material comprised of photoelastic disks in a Couette geometry. We study the intruder dynamics as a function of packing fraction for two types of supporting substrates: a frictional glass plate and a layer of water for which basal friction forces are negligible. We observe two dynamical regimes: intermittent flow, in which the intruder moves freely most of the time but occasionally gets stuck, and stick-slip dynamics, in which the intruder advances via a sequence of distinct, rapid events. When basal friction is present, we observe a smooth crossover between the two regimes as a function of packing fraction, and we find that reducing the interparticle friction coefficient causes the stick-slip regime to shift to higher packing fractions. When basal friction is eliminated, we observe intermittent flow at all accessible packing fractions. For all cases, we present results for the statistics of stick events, the intruder velocity, and the force exerted on the intruder by the grains. Our results indicate the qualitative importance of basal friction at high packing fractions and suggest a possible connection between intruder dynamics in a static material and clogging dynamics in granular flows. △ Less

Submitted 8 October, 2019; v1 submitted 30 May, 2019; originally announced May 2019.

Comments: 10 pages, 11 figures, 1 table. V2: What is now Fig. 5 was added to clarify the raw data measured. References [27] and [37] were updated since they were published only recently

Journal ref: Phys. Rev. E 100, 032905 (2019)

Interaction network analysis in shear thickening suspensions

Authors: Marcio Gameiro, Abhinendra Singh, Lou Kondic, Konstantin Mischaikow, Jeffrey F. Morris

Abstract: Dense, stabilized, frictional particulate suspensions in a viscous liquid undergo increasingly strong continuous shear thickening (CST) as the solid packing fraction, $φ$, increases above a critical volume fraction, and discontinuous shear thickening (DST) is observed for even higher packing fractions. Recent studies have related shear thickening to a transition from mostly lubricated to predomina… ▽ More Dense, stabilized, frictional particulate suspensions in a viscous liquid undergo increasingly strong continuous shear thickening (CST) as the solid packing fraction, $φ$, increases above a critical volume fraction, and discontinuous shear thickening (DST) is observed for even higher packing fractions. Recent studies have related shear thickening to a transition from mostly lubricated to predominantly frictional contacts with the increase in stress. The rheology and networks of frictional forces from two and three-dimensional simulations of shear-thickening suspensions are studied. These are analyzed using measures of the topology of the network, including tools of persistent homology. We observe that at low stress the frictional interaction networks are predominantly quasi-linear along the compression axis. With an increase in stress, the force networks become more isotropic, forming loops in addition to chain-like structures. The topological measures of Betti numbers and total persistence provide a compact means of describing the mean properties of the frictional force networks and provide a key link between macroscopic rheology and the microscopic interactions. A total persistence measure describing the significance of loops in the force network structure, as a function of stress and packing fraction, shows behavior similar to that of relative viscosity and displays a scaling law near the jamming fraction for both dimensionalities simulated. △ Less

Submitted 20 March, 2019; originally announced March 2019.

Comments: 15 pages

Journal ref: Phys. Rev. Fluids 5, 034307 (2020)

Quantitative Measure of Memory Loss in Complex Spatio-Temporal Systems

Authors: Miroslav Kramar, Lenka Kovalcinova, Konstantin Mischaikow, Lou Kondic

Abstract: To make progress in understanding the issue of memory loss and history dependence in evolving complex systems, we consider the mixing rate that specifies how fast the future states become independent of the initial condition. We propose a simple measure for assessing the mixing rate that can be directly applied to experimental data observed in any metric space $X$. For a compact phase space… ▽ More To make progress in understanding the issue of memory loss and history dependence in evolving complex systems, we consider the mixing rate that specifies how fast the future states become independent of the initial condition. We propose a simple measure for assessing the mixing rate that can be directly applied to experimental data observed in any metric space $X$. For a compact phase space $X \subset R^M$, we prove the following statement. If the underlying dynamical system has a unique physical measure and its dynamics is strongly mixing with respect to this measure, then our method provides an upper bound of the mixing rate. We employ our method to analyze memory loss for the system of slowly sheared granular particles with a small inertial number $I$. The shear is induced by the moving walls as well as by the linear motion of the support surface that ensures approximately linear shear throughout the sample. We show that even if $I$ is kept fixed, the rate of memory loss (considered at the time scale given by the inverse shear rate) depends erratically on the shear rate. Our study suggests a presence of bifurcations at which the rate of memory loss increases with the shear rate while it decreases away from these points. We also find that the memory loss is not a smooth process. Its rate is closely related to frequency of the sudden transitions of the force network. The loss of memory, quantified by observing evolution of force networks, is found to be correlated with the loss of correlation of shear stress measured on the system scale. Thus, we have established a direct link between the evolution of force networks and macroscopic properties of the considered system. △ Less

Submitted 6 March, 2019; originally announced March 2019.

Properties of Interaction Networks in Compressed Two and Three Dimensional Particulate Systems

Authors: L. Kovalcinova, A. Taranto, L. Kondic

Abstract: We consider two (2D) and three (3D) dimensional granular systems exposed to compression, and ask what is the influence of the number of physical dimensions on the properties of the interaction networks that spontaneously form as these systems evolve. The study is carried out based on discrete element simulations of frictional disks in 2D and spheres in 3D. The main finding is that both the number… ▽ More We consider two (2D) and three (3D) dimensional granular systems exposed to compression, and ask what is the influence of the number of physical dimensions on the properties of the interaction networks that spontaneously form as these systems evolve. The study is carried out based on discrete element simulations of frictional disks in 2D and spheres in 3D. The main finding is that both the number of physical dimensions and the type of particle-particle interaction influence significantly the properties of interaction networks. These networks play an important role in bridging the microscale (particle size) and macroscale (system size), thus both aspects (the interaction model and dimensionality) are carefully considered. Our work uses a combination of tools and techniques, including percolation study, statistical analysis, as well as algebraic topology-based techniques. In many instances we find that different techniques and measures provide complementary information that, when combined, allow for gaining better insight into the properties of interaction networks. △ Less

Submitted 19 March, 2022; v1 submitted 24 January, 2019; originally announced January 2019.

Comments: 15 pages

Self-assembly of a drop pattern from a two-dimensional grid of nanometric metallic filaments

Authors: Ingrith Cuellar, Pablo D. Ravazzoli, Javier A. Diez, Alejandro G. González, Nicholas A. Roberts, Jason D. Fowlkes, Philip D. Rack, Lou Kondic

Abstract: We report experiments, modeling and numerical simulations of the self--assembly of particle patterns obtained from a nanometric metallic square grid. Initially, nickel filaments of rectangular cross section are patterned on a SiO$_2$ flat surface, and then they are melted by laser irradiation with $\sim 20$ ns pulses. During this time, the liquefied metal dewets the substrate, leading to a linear… ▽ More We report experiments, modeling and numerical simulations of the self--assembly of particle patterns obtained from a nanometric metallic square grid. Initially, nickel filaments of rectangular cross section are patterned on a SiO$_2$ flat surface, and then they are melted by laser irradiation with $\sim 20$ ns pulses. During this time, the liquefied metal dewets the substrate, leading to a linear array of drops along each side of the squares. The experimental data provides a series of SEM images of the resultant morphology as a function of the number of laser pulses or cumulative liquid lifetime. These data are analyzed in terms of fluid mechanical models that account for mass conservation and consider flow evolution with the aim to predict the final number of drops resulting from each side of the square. The aspect ratio, $δ$, between the square sides' lengths and their widths is an essential parameter of the problem. Our models allow us to predict the $δ$-intervals within which a certain final number of drops are expected. The comparison with experimental data shows a good agreement with the model that explicitly considers the Stokes flow developed in the filaments neck region that lead to breakup points. Also, numerical simulations, that solve the Navier-Stokes equations along with slip boundary condition at the contact lines, are implemented to describe the dynamics of the problem. △ Less

Submitted 28 May, 2018; v1 submitted 18 May, 2018; originally announced May 2018.

Journal ref: Phys. Rev. E 98, 043101 (2018)

Characterizing Granular Networks Using Topological Metrics

Authors: Joshua A. Dijksman, Lenka Kovalcinova, Jie Ren, Robert P. Behringer, Miroslav Kramar, Konstantin Mischaikow, Lou Kondic

Abstract: We carry out a direct comparison of experimental and numerical realizations of the exact same granular system as it undergoes shear jamming. We adjust the numerical methods used to optimally represent the experimental settings and outcomes up to microscopic contact force dynamics. Measures presented here range form microscopic, through mesoscopic to system-wide characteristics of the system. Topol… ▽ More We carry out a direct comparison of experimental and numerical realizations of the exact same granular system as it undergoes shear jamming. We adjust the numerical methods used to optimally represent the experimental settings and outcomes up to microscopic contact force dynamics. Measures presented here range form microscopic, through mesoscopic to system-wide characteristics of the system. Topological properties of the mesoscopic force networks provide a key link between micro and macro scales. We report two main findings: the number of particles in the packing that have at least two contacts is a good predictor for the mechanical state of the system, regardless of strain history and packing density. All measures explored in both experiments and numerics, including stress tensor derived measures and contact numbers depend in a universal manner on the fraction of non-rattler particles, $f_{NR}$. The force network topology also tends to show this universality, yet the shape of the master curve depends much more on the details of the numerical simulations. In particular we show that adding force noise to the numerical data set can significantly alter the topological features in the data. We conclude that both $f_{NR}$ and topological metrics are useful measures to consider when quantifying the state of a granular system. △ Less

Submitted 9 January, 2018; originally announced January 2018.

Comments: 8 pages, 8 figures

Journal ref: Phys. Rev. E 97, 042903 (2018)

Influence of thermal effects on stability of nanoscale films and filaments on thermally conductive substrates

Authors: Ivana Seric, Shahriar Afkhami, Lou Kondic

Abstract: We consider films and filaments of nanoscale thickness on thermally conductive substrates exposed to external heating. Particular focus is on metal films exposed to laser irradiation. Due to short length scales involved, the absorption of heat in the metal is directly coupled to the film evolution, since the absorption length and the film thickness are comparable. Such a setup requires self-consis… ▽ More We consider films and filaments of nanoscale thickness on thermally conductive substrates exposed to external heating. Particular focus is on metal films exposed to laser irradiation. Due to short length scales involved, the absorption of heat in the metal is directly coupled to the film evolution, since the absorption length and the film thickness are comparable. Such a setup requires self-consistent consideration of fluid mechanical and thermal effects. We approach the problem via Volume-of-Fluid based simulations that include destabilizing liquid metal-solid substrate interaction potentials. These simulations couple fluid dynamics directly with the spatio-temporal evolution of the temperature field both in the fluid and in the substrate. We focus on the influence of the temperature variation of material parameters, in particular of surface tension and viscosity. Regarding variation of surface tension with temperature, the main finding is that while Marangoni effect may not play a significant role in the considered setting, the temporal variation of surface tension (modifying normal stress balance) is significant and could lead to complex evolution including oscillatory evolution of the liquid metal-air interface. Temperature variation of film viscosity is also found to be relevant. Therefore, the variations of surface tensions and viscosity could both influence the emerging wavelengths in experiments. In contrast, the filament geometry is found to be much less sensitive to a variation of material parameters with temperature. △ Less

Submitted 11 October, 2017; originally announced October 2017.

Granular Response to Impact: Topology of the Force Networks

Authors: T. Tadanaga, Abram H. Clark, T. Majmudar, L. Kondic

Abstract: Impact of an intruder on granular matter leads to formation of mesoscopic force networks seen particularly clearly in the recent experiments carried out with photoelastic particles, e.g., Clark et al., Phys. Rev. Lett., 114 144502 (2015). These force networks are characterized by complex structure and evolve on fast time scales. While it is known that total photoelastic activity in the granular sy… ▽ More Impact of an intruder on granular matter leads to formation of mesoscopic force networks seen particularly clearly in the recent experiments carried out with photoelastic particles, e.g., Clark et al., Phys. Rev. Lett., 114 144502 (2015). These force networks are characterized by complex structure and evolve on fast time scales. While it is known that total photoelastic activity in the granular system is correlated with the acceleration of the intruder, it is not known how the structure of the force network evolves during impact, and if there is a dominant features in the networks that can be used to describe intruder's dynamics. Here, we use topological tools, in particular persistent homology, to describe these features. Persistent homology allows quantification of both structure and time evolution of the resulting force networks. We find that there is a clear correlation of the intruder's dynamics and some of the topological measures implemented. This finding allows us to discuss which properties of the force networks are most important when attempting to describe intruder's dynamics. Regarding temporal evolution of the networks, we are able to define the upper bound on the relevant time scale on which the networks evolve. △ Less

Submitted 20 September, 2017; originally announced September 2017.

Journal ref: Phys. Rev. E 97, 012906 (2018)

Stability of thin fluid films characterised by a complex form of structural/effective disjoining pressure

Authors: Michael-Angelo Y. -H. Lam, Linda J. Cummings, Lou Kondic

Abstract: We discuss instabilities of fluid films of nanoscale thickness, with a particular focus on films where the destabilising mechanism allows for linear instability, metastability, and absolute stability. Our study is motivated by nematic liquid crystal films; however we note that similar instability mechanisms, and forms of the effective disjoining pressure, appear in other contexts, such as the well… ▽ More We discuss instabilities of fluid films of nanoscale thickness, with a particular focus on films where the destabilising mechanism allows for linear instability, metastability, and absolute stability. Our study is motivated by nematic liquid crystal films; however we note that similar instability mechanisms, and forms of the effective disjoining pressure, appear in other contexts, such as the well-studied problem of polymeric films on two-layered substrates. The analysis is carried out within the framework of the long-wave approximation, which leads to a fourth order nonlinear partial different equation for the film thickness. Within the considered formulation, the nematic character of the film leads to an additional contribution to the disjoining pressure, changing its functional form. This effective disjoining pressure is characterised by the presence of a local maximum for non-vanishing film thickness. Such a form leads to complicated instability evolution that we study by analytical means, including application of marginal stability criteria, and by extensive numerical simulations that help us develop a better understanding of instability evolution in the nonlinear regime. This combination of analytical and computational techniques allows us to reach novel understanding of relevant instability mechanisms, and of their influence on transient and fully developed fluid film morphologies. △ Less

Submitted 12 April, 2017; originally announced April 2017.

Comments: 4 supplementary animations included

Evolution of force networks in dense granular matter close to jamming

Authors: Lou Kondic, Miroslav Kramar, Lenka Kovalcinova, Konstantin Mischaikow

Abstract: When dense granular systems are exposed to external forcing, they evolve on the time scale that is typically related to the externally imposed one (shear or compression rate, for example). This evolution could be characterized by observing temporal evolution of contact networks. However, it is not immediately clear whether the force networks, defined on contact networks by considering force intera… ▽ More When dense granular systems are exposed to external forcing, they evolve on the time scale that is typically related to the externally imposed one (shear or compression rate, for example). This evolution could be characterized by observing temporal evolution of contact networks. However, it is not immediately clear whether the force networks, defined on contact networks by considering force interactions between the particles, evolve on a similar time scale. To analyze the evolution of these networks, we carry out discrete element simulations of a system of soft frictional disks exposed to compression that leads to jamming. By using the tools of computational topology, we show that close to jamming transition, the force networks evolve on the time scale which is much faster than the externally imposed one. The presentation will discuss the factors that determine this fast time scale. △ Less

Submitted 7 April, 2017; originally announced April 2017.

Comments: to appear in Powders and Grains, 2017

Energy dissipation in sheared wet granular assemblies

Authors: L. Kovalcinova, S. Karmakar, M. Schaber, A. -L. Schuhmacher, M. Scheel, M. DiMichiel, M. Brinkmann, R. Seemann, L. Kondic

Abstract: Energy dissipation in sheared dry and wet granulates is considered in the presence of an externally applied confining pressure. Discrete element simulations reveal that for sufficiently small confining pressures, the energy dissipation is dominated by the effects related to the presence of cohesive forces between the particles. The residual resistance against shear can be quantitatively explained… ▽ More Energy dissipation in sheared dry and wet granulates is considered in the presence of an externally applied confining pressure. Discrete element simulations reveal that for sufficiently small confining pressures, the energy dissipation is dominated by the effects related to the presence of cohesive forces between the particles. The residual resistance against shear can be quantitatively explained by a combination of two effects arising in a wet granulate: i) enhanced friction at particle contacts in the presence of attractive capillary forces, and ii) energy dissipation due to the rupture and reformation of liquid bridges. Coulomb friction at grain contacts gives rise to an energy dissipation which grows linearly with increasing confining pressure, for both dry and wet granulates. Because of a lower Coulomb friction coefficient in the case of wet grains, as the confining pressure increases the energy dissipation for dry systems is faster than for wet ones. △ Less

Submitted 28 June, 2018; v1 submitted 24 March, 2017; originally announced March 2017.

Journal ref: Phys. Rev. E 98, 032905 (2018)

Granular Impact: A Grain-scale Approach

Authors: Abram H. Clark, Alec Petersen, Lou Kondic, Corey O'Hern, Robert P. Behringer

Abstract: This work summarizes a series of studies on two-dimensional granular impact, where an intruding object strikes a granular material at high speed. Many previous studies on granular impact have used a macroscopic force law, which is dominated by an inertial drag term proportional to the intruder velocity squared. The primary focus here is on the microscopic force response of the granular material, a… ▽ More This work summarizes a series of studies on two-dimensional granular impact, where an intruding object strikes a granular material at high speed. Many previous studies on granular impact have used a macroscopic force law, which is dominated by an inertial drag term proportional to the intruder velocity squared. The primary focus here is on the microscopic force response of the granular material, and how the grain-scale effects give rise to this inertial drag term. We show that the inertial drag arises from intermittent collisions with force-chain-like structures. We construct a simple collisional model to explain the inertial drag, as well as off-axis instability and rotations. Finally, we show how the granular response changes when the intruder speed approaches $d/t_c$, leading to a failure of the inertial drag description in this regime. Here, $d$ is the mean particle diameter and $t_c$ the characteristic momentum-transfer time between two grains. △ Less

Submitted 2 November, 2016; originally announced November 2016.

Comments: This is draft version of a book chapter appearing in "Rapid Penetration into Granular Media" (eds. Iskander et al.)

Journal ref: Chapter 10 - Granular Impact: A Grain-scale Approach, In Rapid Penetration into Granular Media, Elsevier, Oxford, 2015, Pages 319-351, ISBN 9780128008683

Instability of nanometric fluid films on a thermally conductive substrate

Authors: Nanyi Dong, Lou Kondic

Abstract: We consider thin fluid films placed on thermally conductive substrates and exposed to time-dependent spatially uniform heat source. The evolution of the films is considered within the long-wave framework in the regime such that both fluid/substrate interaction, modeled via disjoining pressure, and Marangoni forces, are relevant. We analyze the problem by the means of linear stability analysis as w… ▽ More We consider thin fluid films placed on thermally conductive substrates and exposed to time-dependent spatially uniform heat source. The evolution of the films is considered within the long-wave framework in the regime such that both fluid/substrate interaction, modeled via disjoining pressure, and Marangoni forces, are relevant. We analyze the problem by the means of linear stability analysis as well as by time-dependent nonlinear simulations. The main finding is that when self-consistent computation of the temperature field is performed, a complex interplay of different instability mechanisms results. This includes either monotonous or oscillatory dynamics of the free surface. In particular, we find that the oscillatory behavior is absent if the film temperature is assumed to be slaved to the current value of the film thickness. The results are discussed within the context of liquid metal films, but are of relevance to dynamics of any thin film involving variable temperature of the free surface, such that the temperature and the film interface itself evolve on comparable time scales. △ Less

Submitted 15 June, 2016; v1 submitted 1 February, 2016; originally announced February 2016.

Scaling Properties of Force Networks for Compressed Particulate Systems

Authors: Lenka Kovalcinova, Arnaud Goullet, Lou Kondic

Abstract: We consider, computationally and experimentally, the scaling properties of force networks in the systems of circular particles exposed to compression in two spatial dimensions. The simulations consider polydisperse and monodisperse particles, both frictional and frictionless, and in experiments we use monodisperse and bidisperse particles. While for some of the considered systems we observe consis… ▽ More We consider, computationally and experimentally, the scaling properties of force networks in the systems of circular particles exposed to compression in two spatial dimensions. The simulations consider polydisperse and monodisperse particles, both frictional and frictionless, and in experiments we use monodisperse and bidisperse particles. While for some of the considered systems we observe consistent scaling exponents describing the behavior of the force networks, we find that this behavior is it not universal. In particular, monodisperse frictionless systems that partially crystallize under compression, show scaling properties that are significantly different compared to the other considered systems. The findings of non-universality are confirmed by explicitly computing fractal dimension for the considered systems. The results of physical experiments are consistent with the results obtained in simulations of frictional particles. △ Less

Submitted 17 November, 2015; originally announced November 2015.

Journal ref: Phys. Rev. E 93, 042903 (2016)

Structure of force networks in tapped particulate systems of disks and pentagons (Part 1): Clusters and Loops

Authors: L. A. Pugnaloni, C. M. Carlevaro, M. Kramar, K. Mischaikow, L. Kondic

Abstract: The force network of a granular assembly, defined by the contact network and the corresponding contact forces, carries valuable information about the state of the packing. Simple analysis of these networks based on the distribution of force strengths is rather insensitive to the changes in preparation protocols or to the types of particles. In this paper we consider two dimensional simulations of… ▽ More The force network of a granular assembly, defined by the contact network and the corresponding contact forces, carries valuable information about the state of the packing. Simple analysis of these networks based on the distribution of force strengths is rather insensitive to the changes in preparation protocols or to the types of particles. In this paper we consider two dimensional simulations of tapped systems built from frictional disks and pentagons, and study the structure of the force networks of granular packings by considering network's topology as force thresholds are varied. We show that the number of clusters and loops observed in the force networks as a function of the force threshold are markedly different for disks and pentagons if the tangential contact forces are considered, whereas they are surprisingly similar for the network defined by the normal forces. In particular, the results indicate that, overall, the force network is more heterogeneous for disks than for pentagons. Additionally, we show that the states obtained by tapping with different intensities that display similar packing fraction are difficult to distinguish based on simple topological invariants. △ Less

Submitted 11 October, 2015; originally announced October 2015.

Journal ref: Phys. Rev. E 93, 062902 (2016)

Steady Flow Dynamics during Granular Impact

Authors: Abram H. Clark, Lou Kondic, Robert P. Behringer

Abstract: We study experimentally and computationally the dynamics of granular flow during impacts, where intruders strike a collection of disks from above. In the regime where granular force dynamics are much more rapid than the intruder motion, we find that the particle flow near the intruder is proportional to the instantaneous intruder speed; it is essentially constant when normalized by that speed. The… ▽ More We study experimentally and computationally the dynamics of granular flow during impacts, where intruders strike a collection of disks from above. In the regime where granular force dynamics are much more rapid than the intruder motion, we find that the particle flow near the intruder is proportional to the instantaneous intruder speed; it is essentially constant when normalized by that speed. The granular flow is nearly divergence-free and remains in balance with the intruder, despite the latter's rapid deceleration. Simulations indicate that this observation is insensitive to grain properties, which can be explained by the separation of time scales between intergrain force dynamics and intruder dynamics. Assuming there is a comparable separation of time scales, we expect our results are applicable to a broad class of dynamic or transient granular flows. Our results suggest that descriptions of static-in-time granular flows might be extended or modified to describe these dynamic flows. Additionally, we find that accurate grain-grain interactions are not necessary to correctly capture the granular flow in this regime. △ Less

Submitted 28 April, 2016; v1 submitted 6 October, 2015; originally announced October 2015.

Comments: 6 pages, 5 figures

Journal ref: Phys. Rev. E 93, 050901 (2016)

Role of Thermal Fluctuations in Nonlinear Thin Film Dewetting

Authors: S. Nesic, R. Cuerno, E. Moro, L. Kondic

Abstract: The spontaneous formation of droplets via dewetting of a thin fluid film from a solid substrate allows for materials nanostructuring, under appropriate experimental control. While thermal fluctuations are expected to play a role in this process, their relevance has remained poorly understood, particularly during the nonlinear stages of evolution. Within a stochastic lubrication framework, we show… ▽ More The spontaneous formation of droplets via dewetting of a thin fluid film from a solid substrate allows for materials nanostructuring, under appropriate experimental control. While thermal fluctuations are expected to play a role in this process, their relevance has remained poorly understood, particularly during the nonlinear stages of evolution. Within a stochastic lubrication framework, we show that thermal noise speeds up and substantially influences the formation and evolution of the droplet arrangement. As compared with their deterministic counterparts, for a fixed spatial domain, stochastic systems feature a smaller number of droplets, with a larger variability in sizes and space distribution. Finally, we discuss the influence of stochasticity on droplet coarsening for very long times. △ Less

Submitted 20 May, 2015; originally announced May 2015.

Comments: 6 pages, 5 figures, 2 movies available upon request

Percolation and jamming transitions in particulate systems with and without cohesion

Authors: L. Kovalcinova, A. Goullet, L. Kondic

Abstract: We consider percolation and jamming transitions for particulate systems exposed to compression. For the systems built of particles interacting by purely repulsive forces in addition to friction and viscous damping, it is found that these transitions are influenced by a number of effects, and in particular by the compression rate. In a quasi-static limit, we find that for the considered type of int… ▽ More We consider percolation and jamming transitions for particulate systems exposed to compression. For the systems built of particles interacting by purely repulsive forces in addition to friction and viscous damping, it is found that these transitions are influenced by a number of effects, and in particular by the compression rate. In a quasi-static limit, we find that for the considered type of interaction between the particles, percolation and jamming transitions coincide. For cohesive systems, however, or for any system exposed to even slow dynamics, the differences between the considered transitions are found and quantified. △ Less

Submitted 16 September, 2015; v1 submitted 15 February, 2015; originally announced February 2015.

Nonlinear Force Propagation during Granular Impact

Authors: Abram H. Clark, Alec J. Petersen, Lou Kondic, R. P. Behringer

Abstract: We experimentally study nonlinear force propagation into granular material during impact from an intruder, and we explain our observations in terms of the nonlinear grain-scale force relation. Using high-speed video and photoelastic particles, we determine the speed and spatial structure of the force response just after impact. We show that these quantities depend on a dimensionless parameter,… ▽ More We experimentally study nonlinear force propagation into granular material during impact from an intruder, and we explain our observations in terms of the nonlinear grain-scale force relation. Using high-speed video and photoelastic particles, we determine the speed and spatial structure of the force response just after impact. We show that these quantities depend on a dimensionless parameter, $M'=t_c v_0/d$, where $v_0$ is the intruder speed at impact, $d$ is the particle diameter, and $t_c$ is the collision time for a pair of grains impacting at relative speed $v_0$. The experiments access a large range of $M'$ by using particles of three different materials. When $M' \ll 1$, force propagation is chain-like with a speed, $v_f$, satisfying $v_f \propto d/t_c$. For larger $M'$, the force response becomes spatially dense and the force propagation speed departs from $v_f\propto d/t_c$, corresponding to collective stiffening of a strongly compressed packing of grains. △ Less

Submitted 28 March, 2015; v1 submitted 8 August, 2014; originally announced August 2014.

Comments: 3 figures, 5 pages

Evolution of Force Networks in Dense Particulate Media

Authors: Miroslav Kramar, Arnaud Goullet, Lou Kondic, Konstantin Mischaikow

Abstract: We introduce novel sets of measures with the goal of describing dynamical properties of force networks in dense particulate systems. The presented approach is based on persistent homology and allows for extracting precise, quantitative measures that describe the evolution of geometric features of the interparticle forces, without necessarily considering the details related to individual contacts b… ▽ More We introduce novel sets of measures with the goal of describing dynamical properties of force networks in dense particulate systems. The presented approach is based on persistent homology and allows for extracting precise, quantitative measures that describe the evolution of geometric features of the interparticle forces, without necessarily considering the details related to individual contacts between particles. The networks considered emerge from discrete element simulations of two dimensional particulate systems consisting of compressible frictional circular disks. We quantify the evolution of the networks for slowly compressed systems undergoing jamming transition. The main findings include uncovering significant but localized changes of force networks for unjammed systems, global (system-wide) changes as the systems evolve through jamming, to be followed by significantly less dramatic evolution for the jammed states. We consider both connected components, related in loose sense to force chains, and loops, and find that both measures provide a significant insight into the evolution of force networks. In addition to normal, we consider also tangential forces between the particles and find that they evolve in the consistent manner. Consideration of both frictional and frictionless systems leads us to the conclusion that friction plays a significant role in determining the dynamical properties of the considered networks. We find that the proposed approach describes the considered networks in a precise yet tractable manner, allowing to identify novel features which could be difficult or impossible to describe using other approaches. △ Less

Submitted 24 April, 2014; originally announced April 2014.

Quantifying force networks in particulate systems

Authors: M. Kramar, A. Goullet, L. Kondic, K. Mischaikow

Abstract: We present mathematical models based on persistent homology for analyzing force distributions in particulate systems. We define three distinct chain complexes: digital, position, and interaction, motivated by different capabilities of collecting experimental or numerical data, e.g. digital images, location of the particles, and normal forces between particles, respectively. We describe how algebra… ▽ More We present mathematical models based on persistent homology for analyzing force distributions in particulate systems. We define three distinct chain complexes: digital, position, and interaction, motivated by different capabilities of collecting experimental or numerical data, e.g. digital images, location of the particles, and normal forces between particles, respectively. We describe how algebraic topology, in particular, homology allows one to obtain algebraic representations of the geometry captured by these complexes. To each complexes we define an associated force network from which persistent homology is computed. Using numerical data obtained from molecular dynamics simulations of a system of particles being slowly compressed we demonstrate how persistent homology can be used to compare the geometries of the force distributions in different granular systems. We also discuss the properties of force networks as a function of the underlying complexes, and hence, as a function of the type of experimental or numerical data provided. △ Less

Submitted 18 March, 2014; v1 submitted 2 November, 2013; originally announced November 2013.

Journal ref: Physica D, Vol. 283 (2014), 37-55

Modelling spreading dynamics of liquid crystals in three spatial dimensions

Authors: Te-Sheng Lin, Lou Kondic, Uwe Thiele, Linda J. Cummings

Abstract: We study spreading dynamics of nematic liquid crystal droplets within the framework of the long-wave approximation. A fourth order nonlinear parabolic partial differential equation governing the free surface evolution is derived. The influence of elastic distortion energy and of imposed anchoring variations at the substrate are explored through linear stability analysis and scaling arguments, whic… ▽ More We study spreading dynamics of nematic liquid crystal droplets within the framework of the long-wave approximation. A fourth order nonlinear parabolic partial differential equation governing the free surface evolution is derived. The influence of elastic distortion energy and of imposed anchoring variations at the substrate are explored through linear stability analysis and scaling arguments, which yield useful insight and predictions for the behaviour of spreading droplets. This behaviour is captured by fully nonlinear time-dependent simulations of three dimensional droplets spreading in the presence of anchoring variations that model simple defects in the nematic orientation at the substrate. △ Less

Submitted 21 March, 2013; originally announced March 2013.

Journal ref: J. Fluids, Mech., 729, 214 (2013)

Numerical simulation of ejected molten metal-nanoparticles liquefied by laser irradiation: Interplay of geometry and dewetting

Authors: S. Afkhami, L. Kondic

Abstract: Metallic nanoparticles, liquefied by fast laser irradiation, go through a rapid change of shape attempting to minimize their surface energy. The resulting nanodrops may be ejected from the substrate when the mechanisms leading to dewetting are sufficiently strong, as in the experiments involving gold nanoparticles [Habenicht et al., Science 309, 2043 (2005)]. We use a direct continuum-level approa… ▽ More Metallic nanoparticles, liquefied by fast laser irradiation, go through a rapid change of shape attempting to minimize their surface energy. The resulting nanodrops may be ejected from the substrate when the mechanisms leading to dewetting are sufficiently strong, as in the experiments involving gold nanoparticles [Habenicht et al., Science 309, 2043 (2005)]. We use a direct continuum-level approach to accurately model the process of liquid nanodrop formation and the subsequent ejection from the substrate. Our computations show a significant role of inertial effects and an elaborate interplay of initial geometry and wetting properties: e.g., we can control the direction of ejection by prescribing appropriate initial shape and/or wetting properties. The basic insight regarding ejection itself can be reached by considering a simple effective model based on an energy balance. We validate our computations by comparing directly with the experiments specified above involving the length scales measured in hundreds of nanometers, and with molecular dynamics simulations on much shorter scales measured in tens of atomic diameters, as in [M. Fuentes-Cabrera et al., Phys. Rev. E 83, 041603 (2011)]. The quantitative agreement, in addition to illustrating how to controlling particle ejection, shows utility of continuum-based simulation in describing dynamics on nanoscale quantitatively, even in a complex setting as considered here. △ Less

Submitted 28 June, 2013; v1 submitted 6 March, 2013; originally announced March 2013.

Journal ref: Phys. Rev. Lett. 111, 034501 (2013)

Note on the hydrodynamic description of thin nematic films: strong anchoring model

Authors: Te-Sheng Lin, Linda J. Cummings, Andrew J. Archer, Lou Kondic, Uwe Thiele

Abstract: We discuss the long-wave hydrodynamic model for a thin film of nematic liquid crystal in the limit of strong anchoring at the free surface and at the substrate. We rigorously clarify how the elastic energy enters the evolution equation for the film thickness in order to provide a solid basis for further investigation: several conflicting models exist in the literature that predict qualitatively di… ▽ More We discuss the long-wave hydrodynamic model for a thin film of nematic liquid crystal in the limit of strong anchoring at the free surface and at the substrate. We rigorously clarify how the elastic energy enters the evolution equation for the film thickness in order to provide a solid basis for further investigation: several conflicting models exist in the literature that predict qualitatively different behaviour. We consolidate the various approaches and show that the long-wave model derived through an asymptotic expansion of the full nemato-hydrodynamic equations with consistent boundary conditions agrees with the model one obtains by employing a thermodynamically motivated gradient dynamics formulation based on an underlying free energy functional. As a result, we find that in the case of strong anchoring the elastic distortion energy is always stabilising. To support the discussion in the main part of the paper, an appendix gives the full derivation of the evolution equation for the film thickness via asymptotic expansion. △ Less

Submitted 22 July, 2013; v1 submitted 17 January, 2013; originally announced January 2013.

Journal ref: Phys. Fluids, 25, 082102 (2013)

Particle Scale Dynamics in Granular Impact

Authors: Abram. H. Clark, Lou Kondic, Robert P. Behringer

Abstract: We perform an experimental study of granular impact, where intruders strike 2D beds of photoelastic disks from above. High-speed video captures the intruder dynamics and the local granular force response, allowing investigation of grain-scale mechanisms in this process. We observe rich acoustic behavior at the leading edge of the intruder, strongly fluctuating in space and time, and we show that t… ▽ More We perform an experimental study of granular impact, where intruders strike 2D beds of photoelastic disks from above. High-speed video captures the intruder dynamics and the local granular force response, allowing investigation of grain-scale mechanisms in this process. We observe rich acoustic behavior at the leading edge of the intruder, strongly fluctuating in space and time, and we show that this acoustic activity controls the intruder deceleration, including large force fluctuations at short time scales. The average intruder dynamics match previous studies using empirical force laws, suggesting a new microscopic picture, where acoustic energy is carried away and dissipated. △ Less

Submitted 5 December, 2012; v1 submitted 28 August, 2012; originally announced August 2012.

Journal ref: Phys. Rev. Lett. 109, 238302 (2012)

Monte Carlo and MD Modeling of Density Relaxation by Tapping

Authors: O. Dybenko, A. D. Rosato, D. J. Horntrop, V. Ratnaswamy, L. Kondic

Abstract: The density relaxation phenomenon is modeled using both Monte Carlo and dissipative MD simulations to investigate the effects of regular taps applied to a vessel having a planar floor filled with monodisperse spheres. Results suggest the existence of a critical tap intensity that depends on the mass overburden, which produces a maximum bulk solids fraction. We find that the mechanism responsible… ▽ More The density relaxation phenomenon is modeled using both Monte Carlo and dissipative MD simulations to investigate the effects of regular taps applied to a vessel having a planar floor filled with monodisperse spheres. Results suggest the existence of a critical tap intensity that depends on the mass overburden, which produces a maximum bulk solids fraction. We find that the mechanism responsible for the relaxation phenomenon is evolving quasi-ordered packing structure propagating upwards from the plane floor. △ Less

Submitted 1 January, 2009; originally announced January 2009.

Comments: 4 pages, 6 figures

Signal propagation through dense granular systems

Authors: L. Kondic, O. M. Dybenko, R. P. Behringer

Abstract: The manner in which signals propagate through dense granular systems in both space and time is not well understood. In order to learn more about this process, we carry out discrete element simulations of the system response to excitations where we control the driving frequency and wavelength independently. Fourier analysis shows that properties of the signal depend strongly on the spatial and te… ▽ More The manner in which signals propagate through dense granular systems in both space and time is not well understood. In order to learn more about this process, we carry out discrete element simulations of the system response to excitations where we control the driving frequency and wavelength independently. Fourier analysis shows that properties of the signal depend strongly on the spatial and temporal scales introduced by the perturbation. The features of the response provide a test-bed for any continuum theory attempting to predict signal properties. We illustrate this connection between micro-scale physics and macro-scale behavior by comparing the system response to a simple elastic model with damping. △ Less

Submitted 14 May, 2008; originally announced May 2008.

Comments: 10 pages, 4 figures

Stabilization of nonlinear velocity profiles in athermal systems undergoing planar shear flow

Authors: Ning Xu, Corey S. O'Hern, Lou Kondic

Abstract: We perform molecular dynamics simulations of model granular systems undergoing boundary-driven planar shear flow in two spatial dimensions with the goal of developing a more complete understanding of how dense particulate systems respond to applied shear. In particular, we are interested in determining when these systems will possess linear velocity profiles and when they will develop highly loc… ▽ More We perform molecular dynamics simulations of model granular systems undergoing boundary-driven planar shear flow in two spatial dimensions with the goal of developing a more complete understanding of how dense particulate systems respond to applied shear. In particular, we are interested in determining when these systems will possess linear velocity profiles and when they will develop highly localized velocity profiles in response to shear. In previous work on similar systems we showed that nonlinear velocity profiles form when the speed of the shearing boundary exceeds the speed of shear waves in the material. However, we find that nonlinear velocity profiles in these systems are unstable at very long times. The degree of nonlinearity slowly decreases in time; the velocity profiles become linear when the granular temperature and density profiles are uniform across the system at long times. We measure the time $t_l$ required for the velocity profiles to become linear and find that $t_l$ increases as a power-law with the speed of the shearing boundary and increases rapidly as the packing fraction approaches random close packing. We also performed simulations in which differences in the granular temperature across the system were maintained by vertically vibrating one of the boundaries during shear flow. We find that nonlinear velocity profiles form and are stable at long times if the difference in the granular temperature across the system exceeds a threshold value that is comparable to the glass transition temperature in an equilibrium system at the same average density. Finally, the sheared and vibrated systems form stable shear bands, or highly localized velocity profiles, when the applied shear stress is lowered below the yield stress of the static part of the system. △ Less

Submitted 20 June, 2005; originally announced June 2005.

Comments: 11 pages, 14 figures

Journal ref: Phys. Rev. E 72, 041504 (2005)

On velocity profiles, stresses and Bagnold scaling of sheared granular system in zero gravity

Authors: Oleh Baran, Lou Kondic

Abstract: We report the results of three-dimensional molecular dynamics simulations of sheared granular system in a Couette geometry.\cite{movies} The simulations use realistic boundary conditions that may be expected in physical experiments. For a range of boundary properties we report velocity and density profiles, as well as forces on the boundaries. In particular, we find that the results for the velo… ▽ More We report the results of three-dimensional molecular dynamics simulations of sheared granular system in a Couette geometry.\cite{movies} The simulations use realistic boundary conditions that may be expected in physical experiments. For a range of boundary properties we report velocity and density profiles, as well as forces on the boundaries. In particular, we find that the results for the velocity profiles throughout the shearing cell depend strongly on the interaction of the system particles with the physical boundaries. Even frictional boundaries can allow for significant slippage of the particles, therefore, reducing the shear in the system. Next, we present shear rate dependence of stress, including mean force and force fluctuations, both for controlled volume, and for controlled stress configurations. We discuss the dependence of solid volume fraction on shear rate under the constant pressure condition, and Bagnold scaling in volume controlled experiments. In addition, we study the influence of oscillatory driving on the system properties. △ Less

Submitted 17 November, 2004; originally announced November 2004.

Journal ref: Physics of Fluids, Vol. 17, Issue 7, 073304 (2005)

Velocity Profiles in Repulsive Athermal Systems under Shear

Authors: Ning Xu, Corey S. O'Hern, Lou Kondic

Abstract: We conduct molecular dynamics simulations of athermal systems undergoing boundary-driven planar shear flow in two and three spatial dimensions. We find that these systems possess nonlinear mean velocity profiles when the velocity $u$ of the shearing wall exceeds a critical value $u_c$. Above $u_c$, we also show that the packing fraction and mean-square velocity profiles become spatially-dependen… ▽ More We conduct molecular dynamics simulations of athermal systems undergoing boundary-driven planar shear flow in two and three spatial dimensions. We find that these systems possess nonlinear mean velocity profiles when the velocity $u$ of the shearing wall exceeds a critical value $u_c$. Above $u_c$, we also show that the packing fraction and mean-square velocity profiles become spatially-dependent with dilation and enhanced velocity fluctuations near the moving boundary. In systems with overdamped dynamics, $u_c$ is only weakly dependent on packing fraction $φ$. However, in systems with underdamped dynamics, $u_c$ is set by the speed of shear waves in the material and tends to zero as $φ$ approaches $φ_c$. In the small damping limit, $φ_c$ approaches values for random close-packing obtained in systems at zero temperature. For underdamped systems with $φ<φ_c$, $u_c$ is zero and thus they possess nonlinear velocity profiles at any nonzero boundary velocity. △ Less

Submitted 30 June, 2004; v1 submitted 1 March, 2004; originally announced March 2004.

Comments: 4 pages, 4 figures

Journal ref: Phys. Rev. Lett. 94, 016001 (2005)

Elastic Energy, Fluctuations and Temperature for Granular Materials

Authors: Lou Kondic, R. P. Behringer

Abstract: We probe, using a model system, elastic and kinetic energies for sheared granular materials. For large enough $P/E_y$ (pressure/Young's modulus) and $P/ρv^2$ ($P/$kinetic energy density) elastic dominates kinetic energy, and energy fluctuations become primarily elastic in nature. This regime has likely been reached in recent experiments. We consider a generalization of the granular temperature,… ▽ More We probe, using a model system, elastic and kinetic energies for sheared granular materials. For large enough $P/E_y$ (pressure/Young's modulus) and $P/ρv^2$ ($P/$kinetic energy density) elastic dominates kinetic energy, and energy fluctuations become primarily elastic in nature. This regime has likely been reached in recent experiments. We consider a generalization of the granular temperature, $T_g$, with both kinetic and elastic terms and that changes smoothly from one regime to the other. This $T_g$ is roughly consistent with a temperature adapted from equilibrium statistical mechanics. △ Less

Submitted 22 July, 2003; originally announced July 2003.

Comments: 4 pages, 4 figures

Journal ref: Europhysics Letters, 67(2), pp. 205-211 (2004)

Segregation by friction

Authors: L. Kondic, R. R. Hartley, S. G. K. Tennakoon, B. Painter, R. P. Behringer

Abstract: Granular materials are known to separate by size under a variety of circumstances. Experiments presented here and elucidated by modeling and MD simulation document a new segregation mechanism, namely segregation by friction. The experiments are carried out by placing steel spheres on a horizontal plane enclosed by rectangular sidewalls, and subjecting them to horizontal shaking. Half the spheres… ▽ More Granular materials are known to separate by size under a variety of circumstances. Experiments presented here and elucidated by modeling and MD simulation document a new segregation mechanism, namely segregation by friction. The experiments are carried out by placing steel spheres on a horizontal plane enclosed by rectangular sidewalls, and subjecting them to horizontal shaking. Half the spheres are highly smooth; the remainder are identical to the first half, except that their surfaces have been roughened by chemical etching, giving them higher coefficients of friction. Segregation due to this difference in friction occurs, particularly when the grains have a relatively long mean free path. In the presence of an appropriately chosen small ``hill'' in the middle of the container, the grains can be made to completely segregate by friction type. △ Less

Submitted 30 October, 2002; originally announced October 2002.

Comments: 7 pages, 5 figures (one photo), epl.cls req'd