-
Frequencies of the Edge-Magnetoplasmon Excitations in Gated Quantum Hall Edges
Authors:
Akira Endo,
Keita Koike,
Shingo Katsumoto,
Yasuhiro Iye
Abstract:
We have investigated microwave transmission through the edge of quantum Hall systems by employing a coplanar waveguide (CPW) fabricated on the surface of a GaAs/AlGaAs two-dimensional electron gas (2DEG) wafer. An edge is introduced to the slot region of the CPW by applying a negative bias $V_\mathrm{g}$ to the central electrode (CE) and depleting the 2DEG below the CE. We observe peaks attributab…
▽ More
We have investigated microwave transmission through the edge of quantum Hall systems by employing a coplanar waveguide (CPW) fabricated on the surface of a GaAs/AlGaAs two-dimensional electron gas (2DEG) wafer. An edge is introduced to the slot region of the CPW by applying a negative bias $V_\mathrm{g}$ to the central electrode (CE) and depleting the 2DEG below the CE. We observe peaks attributable to the excitation of edge magnetoplasmons (EMP) at a fundamental frequency $f_0$ and at its harmonics $i f_0$ ($i$ = 2, 3,...). The frequency $f_0$ increases with decreasing $V_\mathrm{g}$, indicating that EMP propagates with higher velocity for more negative $V_\mathrm{g}$. The dependence of $f_0$ on $V_\mathrm{g}$ is interpreted in terms of the variation in the distance between the edge state and the CE, which alters the velocity by varying the capacitive coupling between them. The peaks are observed to continue, albeit with less clarity, up to the regions of $V_\mathrm{g}$ where 2DEG still remains below the CE.
△ Less
Submitted 24 April, 2018;
originally announced April 2018.
-
Large difference between the magnetic properties of Ba and Ti co-doped BiFeO$_3$ bulk materials and their corresponding nanoparticles prepared by ultrasonication
Authors:
Bashir Ahmmad,
Kensaku Kanomata,
Kunihiro Koike,
Shigeru Kubota,
Hiroaki Kato,
Fumihiko Hirose,
Areef Billah,
M. A. Jalil,
M. A. Basith
Abstract:
The ceramic pellets of the nominal compositions Bi$_{0.7}$Ba$_{0.3}$Fe$_{1-x}$Ti$_x$O$_3$ (x = 0.00-0.20) were prepared initially by standard solid state reaction technique. The pellets were then ground into micrometer-sized powders and mixed with isopropanol in an ultrasonic bath to prepare nanoparticles. The X-ray diffraction patterns demonstrate the presence of a significant number of impurity…
▽ More
The ceramic pellets of the nominal compositions Bi$_{0.7}$Ba$_{0.3}$Fe$_{1-x}$Ti$_x$O$_3$ (x = 0.00-0.20) were prepared initially by standard solid state reaction technique. The pellets were then ground into micrometer-sized powders and mixed with isopropanol in an ultrasonic bath to prepare nanoparticles. The X-ray diffraction patterns demonstrate the presence of a significant number of impurity phases in bulk powder materials. Interestingly, these secondary phases were completely removed due to the sonication of these bulk powder materials for 60 minutes. The field and temperature dependent magnetization measurements exhibited significant difference between the magnetic properties of the bulk materials and their corresponding nanoparticles. We anticipate that the large difference in the magnetic behavior may be associated with the presence and absence of secondary impurity phases in the bulk materials and their corresponding nanoparticles, respectively. The leakage current density of the bulk materials was also found to suppress in the ultrasonically prepared nanoparticles compared to that of bulk counterparts.
△ Less
Submitted 28 April, 2016;
originally announced April 2016.
-
Centrosymmetric PbTe/CdTe quantum dots coherently embedded by epitaxial precipitation
Authors:
W. Heiss,
H. Groiss,
E. Kaufmann,
G. Hesser,
M. Boberl,
G. Springholz,
F. Schaffler,
K. Koike,
H. Harada,
M. Yano
Abstract:
A concept for the fabrication of highly symmetric quantum dots that are coherently embedded in a single crystalline matrix is demonstrated. In this approach, the formation of the quantum dots is induced by a transformation of an epitaxial 2D quantum well into an array of isolated precipitates with dimensions of about 25 nm. The formation process is driven by the immiscibility of the constituent…
▽ More
A concept for the fabrication of highly symmetric quantum dots that are coherently embedded in a single crystalline matrix is demonstrated. In this approach, the formation of the quantum dots is induced by a transformation of an epitaxial 2D quantum well into an array of isolated precipitates with dimensions of about 25 nm. The formation process is driven by the immiscibility of the constituent materials resulting from their different lattice structures. The investigated PbTe/CdTe heterosystem combines two different cubic lattices with almost identical lattice constants. Therefore, the precipitated quantum dots are almost strain free and near thermodynamic equilibrium they exhibit the shape of small-rhombo-cubo-octahedrons. The PbTe/CdTe quantum dots, grown on GaAs substrates, display intense room temperature luminescence at wavelength around 3.2 micrometer, which makes them auspicious for applications in mid-infrared photonic devices.
△ Less
Submitted 22 February, 2006;
originally announced February 2006.
