-
Defect engineering over anisotropic brookite towards substrate-specific photo-oxidation of alcohols
Authors:
S. M. Hossein Hejazi,
Mahdi Shahrezaei,
Piotr Błoński,
Mattia Allieta,
Polina M. Sheverdyaeva,
Paolo Moras,
Zdeněk Baďura,
Sergii Kalytchuk,
Elmira Mohammadi,
Radek Zbořil,
Štěpán Kment,
Michal Otyepka,
Alberto Naldoni,
Paolo Fornasiero
Abstract:
Generally adopted design strategies for enhancing the photocatalytic activity are aimed at tuning properties such as the visible light response, the exposed crystal facets, and the nanocrystal shape. Here, we present a different approach for designing efficient photocatalysts displaying a substrate-specific reactivity upon defect engineering. The defective anisotropic brookite TiO2 photocatalyst f…
▽ More
Generally adopted design strategies for enhancing the photocatalytic activity are aimed at tuning properties such as the visible light response, the exposed crystal facets, and the nanocrystal shape. Here, we present a different approach for designing efficient photocatalysts displaying a substrate-specific reactivity upon defect engineering. The defective anisotropic brookite TiO2 photocatalyst functionalized with Pt nanocrystals are tested for alcohol photoreforming showing up to an 11-fold increase in methanol oxidation rate, compared to the unreduced one, whilst presenting much lower ethanol or isopropanol specific oxidation rates. We demonstrate that the alcohol oxidation and hydrogen evolution reactions are tightly related, and when the substrate-specific alcohol oxidation ability is increased, the hydrogen evolution is significantly boosted. The reduced anisotropic brookite shows up to twenty-six-fold higher specific photoactivity with respect to anatase and brookite with isotropic nanocrystals, reflecting the different type of defective catalytic sites formed depending on the TiO2 polymorph and its crystal shape. Advanced in-situ characterizations and theoretical investigations reveal that controlled engineering over oxygen vacancies and lattice strain produces large electron polarons hosting the substrate-specific active sites for alcohol photo-oxidation.
△ Less
Submitted 11 January, 2023;
originally announced January 2023.
-
Colloidal Titanium Nitride Nanobars for Broadband Inexpensive Plasmonics and Photochemistry from Visible to Mid-IR Wavelengths
Authors:
Sourav Rej,
Eva Yazmin Santiago,
Olga Baturina,
Yu Zhang,
Sven Burger,
Stepan Kment,
Alexander O. Govorov,
Alberto Naldoni
Abstract:
Developing colloidal plasmonic nanomaterials with high carrier density that show optical resonances and photochemical activity extending from the visible to the mid-infrared (MIR) ranges remains a challenging pursuit. Here, we report the fabrication of titanium nitride (TiN) nanobars obtained using a two step procedure based on a wet chemical route synthesis of TiO2 nanowires and their subsequent…
▽ More
Developing colloidal plasmonic nanomaterials with high carrier density that show optical resonances and photochemical activity extending from the visible to the mid-infrared (MIR) ranges remains a challenging pursuit. Here, we report the fabrication of titanium nitride (TiN) nanobars obtained using a two step procedure based on a wet chemical route synthesis of TiO2 nanowires and their subsequent high temperature annealing in ammonia flow. Electromagnetic simulations of the resulting TiN nanobars reveal a rich set of optical resonances featuring transverse, longitudinal and mixed transverse longitudinal plasmonic modes that cover energies from the visible to MIR region. TiN nanobars decorated with Pt co catalyst nanocrystals show enhanced photocatalytic hydrogen evolution activity in comparison to both isotropic TiN nanospheres of similar size and TiN nanocubes under near infrared excitation at 940 nm due to the enhanced hot electron generation. We also demonstrate that plasmonic TiN nanobars can be used for the detection of furfural molecular vibrations by providing a strong surface enhanced infrared absorption (SEIRA) effect in the MIR region.
△ Less
Submitted 10 September, 2022;
originally announced September 2022.
-
Effect of Low Oxygen Annealing on Photoelectrochemical Water Splitting Properties of $α$-Fe$_2$O$_3$
Authors:
Yoichi Makimizu,
Nhat Truong Nguyen,
Hyo-Jin Ahn,
JeongEun Yoo,
Imgon Hwang,
Stepan Kment,
Patrik Schmuki
Abstract:
Photoelectrochemical (PEC) water splitting is a promising method for conversing solar energy into chemical energy stored in the form of hydrogen. Nanostructured hematite ($α$-Fe$_2$O$_3$) is one of the most attractive materials for highly efficient charge carrier generation and collection due to its large specific surface area and shortening minority carrier diffusion length required to reach the…
▽ More
Photoelectrochemical (PEC) water splitting is a promising method for conversing solar energy into chemical energy stored in the form of hydrogen. Nanostructured hematite ($α$-Fe$_2$O$_3$) is one of the most attractive materials for highly efficient charge carrier generation and collection due to its large specific surface area and shortening minority carrier diffusion length required to reach the surface. In the present work, PEC water splitting performance of $α$-Fe$_2$O$_3$ prepared by anodization of thin iron layers on an FTO glass and subsequent annealing in low O$_2$-Ar ambient with only 0.03% O$_2$ was investigated. The key finding is that annealing the anodic nanostructures with low oxygen concentration provides a strongly enhanced PEC performance compared with classic air annealing. The photocurrent of the former at 1.5 V vs. RHE results in 1.1 mA/cm2, being 11 times higher than that of the latter. The enhancement of the PEC performance for $α$-Fe$_2$O$_3$ annealed in low oxygen atmosphere can be attributed to controlled morphology, Sn doping, and introduction of oxygen vacancies, which contribute to the enhancement of the hole flux from the photogenerated site to the reactive surface and additionally lead to an enhanced hole transfer at the interface between the $α$-Fe$_2$O$_3$ and the electrolyte. From the obtained results, it is evident that low oxygen annealing is a surprisingly effective method of defect engineering and optimizing $α$-Fe$_2$O$_3$ electrodes for a maximized PEC water splitting performance.
△ Less
Submitted 14 April, 2020;
originally announced May 2020.
-
Amorphous Mo-Ta oxide nanotubes for long-term stable Mo oxide based supercapacitors
Authors:
Bowen Jin,
Seyedsina Hejazi,
Florian Pyczak,
Michael Oehring,
Shiva Mohajernia,
Stepan Kment,
Ondrej Tomanec,
Radek Zboril,
Nhat Truong Nguyen,
Min Yang,
Patrik Schmuki
Abstract:
With a large-scale usage of portable electric appliances, a high demand for increasingly high density energy storage devices has emerged. MoO3 has, in principle, a large potential as negative electrode material in supercapacitive devices, due to high charge densities that can be obtained from its reversible redox reactions. Nevertheless, the extremely poor electrochemical stability of MoO3 in aque…
▽ More
With a large-scale usage of portable electric appliances, a high demand for increasingly high density energy storage devices has emerged. MoO3 has, in principle, a large potential as negative electrode material in supercapacitive devices, due to high charge densities that can be obtained from its reversible redox reactions. Nevertheless, the extremely poor electrochemical stability of MoO3 in aqueous electrolytes prevents a practical use in high capacitance devices. In this work, we describe how to overcome this severe stability issue by forming amorphous molybdenum oxide/tantalum oxide nanotubes by anodic oxidation of a Mo-Ta alloy. The presence of a critical amount of Ta-oxide (> 20 at-%) prevents the electrochemical decay of the MoO3 phase and thus yields an extremely high stability. Due to the protection provided by tantalum oxide, no capacitance losses are measureable after 10000 charg-ing/discharging cycles.
△ Less
Submitted 14 April, 2020;
originally announced May 2020.
-
Photoanodes Based on TiO$_2$ and $α$-Fe$_2$O$_3$ for Solar Water Splitting Superior Role of 1D Nanoarchitectures and of Combined Heterostructures
Authors:
Stepan Kment,
Francesca Riboni,
Sarka Pausova,
Lei Wang,
Lingyun Wang,
Hyungkyu Han,
Zdenek Hubicka,
Josef Krysa,
Patrik Schmuki,
Radek Zboril
Abstract:
Solar driven photoelectrochemical water splitting (PEC-WS) using semiconductor photoelectrodes represents a promising approach for a sustainable and environmentally friendly production of renewable energy vectors and fuel sources, such as dihydrogen (H2). In this context, titanium dioxide (TiO$_2$) and iron oxide (hematite, $α$-Fe$_2$O$_3$) are among the most investigated candidates as photoanode…
▽ More
Solar driven photoelectrochemical water splitting (PEC-WS) using semiconductor photoelectrodes represents a promising approach for a sustainable and environmentally friendly production of renewable energy vectors and fuel sources, such as dihydrogen (H2). In this context, titanium dioxide (TiO$_2$) and iron oxide (hematite, $α$-Fe$_2$O$_3$) are among the most investigated candidates as photoanode materials, mainly owing to their resistance to photocorrosion, non-toxicity, natural abundance, and low production cost. Major drawbacks are, however, an inherently low electrical conductivity and a limited hole diffusion length that significantly affect the performance of TiO$_2$ and $α$-Fe$_2$O$_3$ in PEC devices. To this regard, one-dimensional (1D) nanostructuring is typically applied as it provides several superior features such as a significant enlargement of the material surface area, extended contact between the semiconductor and the electrolyte and, most remarkably, preferential electrical transport that overall suppress charge carrier recombination and improve TiO$_2$ and $α$-Fe$_2$O$_3$ photo-electrocatalytic properties. The present review describes various synthetic methods, properties and PEC applications of 1D-photoanodes (nanotubes, nanorods, nanofibers, nanowires) based on titania, hematite, and on $α$-Fe$_2$O$_3$/TiO$_2$ heterostructures. Various routes towards modification and enhancement of PEC activity of 1D photoanodes are also discussed including doping, decoration with co-catalysts and heterojunction engineering. Finally, the challenges related to the optimization of charge transfer kinetics in both oxides are highlighted.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Influence of Ti$_3^+$ Defect-type on Heterogeneous Photocatalytic H$_2$ Evolution Activity of TiO$_2$
Authors:
Shiva Mohajernia,
Pavlina Andryskova,
Giorgio Zoppellaro,
Seyedsina Hejazi,
Stepan Kment,
Radek Zboril,
Patrik Schmuki
Abstract:
Reduced titanium dioxide has recently attracted large attention, particularly for its unique co-catalyst-free H$_2$ heterogeneous photocatalytic application. The enhanced photocatalytic activity of the reduced TiO$_2$ was previously ascribed to the introduction of point crystal defects (mainly Ti$_3^+$ centers), which result in the formation of intrinsic co-catalytic centers and enhanced visible l…
▽ More
Reduced titanium dioxide has recently attracted large attention, particularly for its unique co-catalyst-free H$_2$ heterogeneous photocatalytic application. The enhanced photocatalytic activity of the reduced TiO$_2$ was previously ascribed to the introduction of point crystal defects (mainly Ti$_3^+$ centers), which result in the formation of intrinsic co-catalytic centers and enhanced visible light absorption. In this work, we systematically investigate the effect of different defects in the TiO$_{2-x}$ lattice on photocatalytic H$_2$ evolution. To introduce different types of defects, thermal annealing in air (oxidative), Ar (inert), Ar/H$_2$ (reducing), and H$_2$ (reducing) atmospheres were performed on commercially available anatase nanopowder. Then, the powders were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HR-TEM) to clarify the effect of treatment on material properties. Furthermore, the defect types were characterized by electron paramagnetic resonance (EPR) spectroscopy. We show that thermal annealing in different atmospheres can form different amounts of different defect types in the TiO$_2$ structure. The highest photocatalytic activation is achieved by annealing the anatase powder in a reducing atmosphere for an appropriate temperature/annealing time. By combining the results from H$_2$ generation and EPR analysis we show that the simultaneous presence of two types of defects, i.e. surface exposed Ti$_3^+$ and lattice embedded Ti$_3^+$ centers, in an optimum low concentration, is the determining factor for an optimized photocatalytic H$_2$ evolution rate. In fact, annealing anatase powder under the so-reported optimized conditions in reducing atmosphere leads to the generation of a considerable amount of H$_2$, with rates as high as 338 $μ$molh-1g-1.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Templated Dewetting-Alloying of NiCu Bilayers on TiO$_2$ Nanotubes Enables Efficient Noble Metal-Free Photocatalytic $H_2$ Evolution
Authors:
Davide Spanu,
Sandro Recchia,
Shiva Mohajernia,
Ondrei Tomanec,
Stepan Kment,
Radek Zboril,
Patrik Schmukia,
Marco Altomare
Abstract:
Photocatalytic $H_2$ evolution reactions on pristine TiO$_2$ is characterized by low efficiencies due to trapping and recombination of charge carriers, and due to a sluggish kinetics of electron transfer. Noble metal (mainly Pt, Pd, Au) nanoparticles are typically decorated as cocatalyst on the TiO$_2$ surface to reach reasonable photocatalytic yields. However, owing to the high cost of noble meta…
▽ More
Photocatalytic $H_2$ evolution reactions on pristine TiO$_2$ is characterized by low efficiencies due to trapping and recombination of charge carriers, and due to a sluggish kinetics of electron transfer. Noble metal (mainly Pt, Pd, Au) nanoparticles are typically decorated as cocatalyst on the TiO$_2$ surface to reach reasonable photocatalytic yields. However, owing to the high cost of noble metals, alternative metal cocatalysts are being developed. Here we introduce an approach to fabricate an efficient noble metal free photocatalytic platform for $H_2$ evolution based on alloyed NiCu cocatalytic nanoparticles at the surface of anodic TiO$_2$ nanotube arrays. NiCu bilayers are deposited onto the TiO$_2$ nanotubes by plasma sputtering. A subsequent thermal treatment is carried out that leads to dewetting, that is, owing to surface diffusion the Ni and Cu sputtered layers simultaneously mix with each other and split into NiCu nanoparticles at the nanotube surface. The approach allows for a full control over key features of the alloyed nanoparticles such as their composition, work function and cocatalytic ability towards $H_2$ generation. Dewetted-alloyed cocatalytic nanoparticles composed of equal Ni and Cu amounts not only are significantly more reactive than pure Ni or Cu nanoparticles, but also lead to $H_2$ generation rates that can be comparable to those obtained by conventional noble metal (Pt) decoration of TiO$_2$ nanotube arrays.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.