Showing 1–14 of 14 results for author: Kitenbergs, G

Physical model of serum supplemented medium flow in organ-on-a-chip systems

Authors: Viesturs Šints, Jānis Cīmurs, Mihails Birjukovs, Ivars Driķis, Karīna Goluba, Kaspars Jēkabsons, Vadims Parfejevs, Una Riekstiņa, Gatis Mozoļevskis, Roberts Rimša, Guntars Kitenbergs

Abstract: Creating a physiologically relevant shear stress in organ-on-a-chip (OOC) devices requires careful tailoring of microfluidic flow parameters. It is currently fairly common to use a simple approximation assuming a constant viscosity, even for serum-based media. Here, we show that a popular nutrient solution (Dulbecco's Modified Eagle Medium supplemented with Fetal Bovine Serum) requires a more comp… ▽ More Creating a physiologically relevant shear stress in organ-on-a-chip (OOC) devices requires careful tailoring of microfluidic flow parameters. It is currently fairly common to use a simple approximation assuming a constant viscosity, even for serum-based media. Here, we show that a popular nutrient solution (Dulbecco's Modified Eagle Medium supplemented with Fetal Bovine Serum) requires a more complex treatment (i.e., is a non-Newtonian fluid), with observed shear stress values significantly greater than reported in literature. We measure the rheology of the solutions and combine it with a 3-dimensional flow field measurement to derive shear stress at the channel surface. We verify the experiments with numerical simulations, finding good agreement and deriving flow properties. Finally, we provide relevant expressions for shear stress approximation, suitable for development of OOC devices with various geometries. △ Less

Submitted 20 September, 2024; originally announced September 2024.

Tuning properties of phase-separated magnetic fluid with temperature

Authors: Laura Nelsone, Guntars Kitenbergs

Abstract: Phase-separated magnetic fluids provide a very strong magnetic response ($μ>25$) in a liquid state material. Even small fields can cause a notable material response, but this depends on its properties, which are often difficult to control. Here, we investigate how temperature affects the properties of the system, where phase separation is induced by an increase in ionic strength. Following the def… ▽ More Phase-separated magnetic fluids provide a very strong magnetic response ($μ>25$) in a liquid state material. Even small fields can cause a notable material response, but this depends on its properties, which are often difficult to control. Here, we investigate how temperature affects the properties of the system, where phase separation is induced by an increase in ionic strength. Following the deformations of individual microscopic droplets, we can extract surface tension, magnetic permeability, and viscosity. We find that the temperature increase does not affect the surface tension, while the magnetic permeability and viscosity increase. Applying this knowledge to induce a shape instability for a drop only using temperature shows the potential of applicability of our findings. △ Less

Submitted 16 February, 2024; originally announced February 2024.

Comments: Submitted to JMMM special issue of the 16th International Conference on Magnetic Fluids

Macroscopic emulation of microscopic magnetic particle systems

Authors: Viesturs Spūlis, Daniels Gorovojs, Jānis Pudāns, Rolands Lopatko, Andris P. Stikuts, Mārtiņš Brics, Guntars Kitenbergs, Jānis Cīmurs

Abstract: In this work we show that macroscopic experiments can be used to investigate microscopic systems. Such macroscopic experiments enable testing the assumptions and results obtained by theoretical considerations or simulations that can not be obtained under microscope (e.g., the orientation of a spherical particle). To emulate the dynamics of a single hematite cube immersed in water and subjected to… ▽ More In this work we show that macroscopic experiments can be used to investigate microscopic systems. Such macroscopic experiments enable testing the assumptions and results obtained by theoretical considerations or simulations that can not be obtained under microscope (e.g., the orientation of a spherical particle). To emulate the dynamics of a single hematite cube immersed in water and subjected to a rotating magnetic field, a cubic magnet is firmly positioned in a 3D printed superball shell. The dimensionless parameters of the microscopic and macroscopic systems can be equalized by using a glycerol-water mixture instead of water as well as by the material and infill of the 3D printed shell. The pose of the superball is tracked using ArUco stickers which act as fiducial markers. It was found that there is a qualitative agreement between the macroscopic experiments and theoretical predictions. However, the reduced thermal effects in the macroscopic experiments lead to an increase in friction between the superball and the surface, thus shifting the critical frequency of the system. Since the shell is 3D printed, the given method can be extended to any shape and magnetization orientation. △ Less

Submitted 18 December, 2023; v1 submitted 28 October, 2023; originally announced October 2023.

Comments: 21 page, 6 figures, 1 table. Submitted to JMMM special issue ICMF 2023. Presented as poster in ICMF 2023

Local flow measurements around flexible filaments under rotating magnetic field

Authors: Andris P. Stikuts, Abdelqader Zaben, Ivars Driķis, Māra Šmite, Rūdolfs Livanovičs, Andrejs Cēbers, Guntars Kitenbergs

Abstract: Effective mixing of fluids at the microfluidic scale is important for future applications in biology, medicine, and chemistry. A promising type of micromixers are magnetic filaments, which can be activated by an external magnetic field. However, there is a lack of research that combines experiments and numerical modelling of hydrodynamics around such filaments. Here we use micro-particle image vel… ▽ More Effective mixing of fluids at the microfluidic scale is important for future applications in biology, medicine, and chemistry. A promising type of micromixers are magnetic filaments, which can be activated by an external magnetic field. However, there is a lack of research that combines experiments and numerical modelling of hydrodynamics around such filaments. Here we use micro-particle image velocimetry to measure flow fields around rotating flexible ferromagnetic filaments and compare them to numerical data from elastic rod model. We measure that rotating filaments hover above the surface, whereas the resulting fluid velocities are highly dependent on the hovering distance. We also find that the rotating filament causes a 3D flow coming from the rotational plane and being extracted along the axis of rotation. These findings will help develop better micromixers. △ Less

Submitted 5 July, 2023; originally announced July 2023.

Ferromagnetic filament shapes in a rotating field reveal their magnetoelastic properties

Authors: Andris P. Stikuts, Andrejs Cēbers, Guntars Kitenbergs

Abstract: Flexible ferromagnetic filaments can be used to control the flow on the micro-scale with external magnetic field. To accurately model them, it is crucial to know their parameters such as their magnetization and bending modulus, the latter of which is hard to determine precisely. We present a method how the ferromagnetic filament's shape in a rotating field can be used to determine the magnetoelast… ▽ More Flexible ferromagnetic filaments can be used to control the flow on the micro-scale with external magnetic field. To accurately model them, it is crucial to know their parameters such as their magnetization and bending modulus, the latter of which is hard to determine precisely. We present a method how the ferromagnetic filament's shape in a rotating field can be used to determine the magnetoelastic number $Cm$ - the ratio of magnetic to elastic forces. Then once the magnetization of the filament is known, it is possible to determine its bending modulus. The main idea of the method is that $Cm$ is the only parameter that determines whether the filament is straight or whether its tips are bent towards the magnetic field direction. Comparing with numerical solutions, we show that the method results in an error of $15...20\%$ for the determined $Cm$, what is more precise than estimations from other methods. This method will allow to improve the comparability between theoretical filament models and experimental measurements. △ Less

Submitted 2 July, 2023; originally announced July 2023.

Rotating hematite cube chains

Authors: Mārtiņš Brics, Viesturs Šints, Guntars Kitenbergs, Andrejs Cēbers

Abstract: Recently a two-dimensional chiral fluid was experimentally demonstrated. It was obtained from cubic-shaped hematite colloidal particles placed in a rotating magnetic field. Here we look at building blocks of that fluid, by analyzing short hematite chain behavior in a rotating magnetic field. We find equilibrium structures of chains in static magnetic fields and observe chain dynamics in rotating m… ▽ More Recently a two-dimensional chiral fluid was experimentally demonstrated. It was obtained from cubic-shaped hematite colloidal particles placed in a rotating magnetic field. Here we look at building blocks of that fluid, by analyzing short hematite chain behavior in a rotating magnetic field. We find equilibrium structures of chains in static magnetic fields and observe chain dynamics in rotating magnetic fields. We find and experimentally verify that there are three planar motion regimes and one where the cube chain goes out of the plane of the rotating magnetic field. In this regime we observe interesting dynamics -- the chain rotates slower than the rotating magnetic field. In order to catch up with the magnetic field, it rolls on an edge and through rotation in the third dimension catches up with the magnetic field. The same dynamics is also observable for a single cube when gravitational effects are explicitly taken into account. △ Less

Submitted 6 June, 2023; v1 submitted 27 February, 2023; originally announced February 2023.

Comments: 8 videos in supplementary material

The most energetically favorable configurations of hematite cube chains

Authors: Mārtiņš Brics, Viesturs Šints, Guntars Kitenbergs, Andrejs Cēbers

Abstract: Hematite at room temperature is a weak ferromagnetic material. Its permanent magnetization is three orders smaller than for magnetite. Thus, hematite colloids allow us to explore a different physical range of particle interaction parameters compared to ordinary ferromagnetic particle colloids. In this paper we investigate a colloid consisting of hematite particles with cubic shape. We search for e… ▽ More Hematite at room temperature is a weak ferromagnetic material. Its permanent magnetization is three orders smaller than for magnetite. Thus, hematite colloids allow us to explore a different physical range of particle interaction parameters compared to ordinary ferromagnetic particle colloids. In this paper we investigate a colloid consisting of hematite particles with cubic shape. We search for energetically favorable structures in an external magnetic field with analytical and numerical methods and molecular dynamics simulations and analyze whether it is possible to observe them in experiments. We find that energetically favorable configurations are observable only for short chains. Longer chains usually contain kinks which are formed in the process of chain formation due to the interplay of energy and thermal fluctuations as an individual cube can be in one of two alignments with an equal probability. △ Less

Submitted 23 May, 2022; v1 submitted 19 October, 2021; originally announced October 2021.

Comments: 14 pages, 22 figures

Journal ref: PRE 105, 024605:1--14, (2022)

3D motion of flexible ferromagnetic filaments under rotating magnetic field

Authors: Abdelqader Zaben, Guntars Kitenbergs, Andrejs Cēbers

Abstract: Ferromagnetic filaments in a rotating magnetic field are studied both numerically and experimentally. The filaments are made from micron-sized ferromagnetic particles linked with DNA strands. It is found that at low frequencies of the rotating field a filament rotates synchronously with the field and beyond a critical frequency it undergoes a transition to a three dimensional regime. In this regim… ▽ More Ferromagnetic filaments in a rotating magnetic field are studied both numerically and experimentally. The filaments are made from micron-sized ferromagnetic particles linked with DNA strands. It is found that at low frequencies of the rotating field a filament rotates synchronously with the field and beyond a critical frequency it undergoes a transition to a three dimensional regime. In this regime the tips of the filament rotate synchronously with the field on circular trajectories in the plane parallel to the plane of the rotating field. The characteristics of this motion found numerically match the experimental data and allow us to obtain the physical properties of such filaments. We also discuss the differences in behaviour between magnetic rods and filaments and the applicability of filaments in mixing. △ Less

Submitted 8 March, 2020; originally announced March 2020.

Comments: Submitted to RSC Soft Matter Journal , uses rsc template

Swarming of micron-sized hematite cubes in a rotating magnetic field -- Experiments

Authors: Oksana Petrichenko, Guntars Kitenbergs, Martins Brics, Emmanuelle Dubois, Régine Perzynski, Andrejs Cēbers

Abstract: Energy input by under-field rotation of particles drives the systems to emergent non-equilibrium states. Here we investigate the suspension of rotating magnetic cubes. Micron-sized hematite cubes are synthesized and observed microscopically. When exposed to a rotating magnetic field, they form rotating swarms that interact with each other like liquid droplets. We describe the swarming behaviour an… ▽ More Energy input by under-field rotation of particles drives the systems to emergent non-equilibrium states. Here we investigate the suspension of rotating magnetic cubes. Micron-sized hematite cubes are synthesized and observed microscopically. When exposed to a rotating magnetic field, they form rotating swarms that interact with each other like liquid droplets. We describe the swarming behaviour and its limits and characterize swarm size and angular velocity dependence on magnetic field strength and frequency. A quantitative agreement with a theoretical model is found for the angular velocity of swarms as a function of field frequency. It is interesting to note that hematite particles with peanut or ellipsoidal shapes do not form swarms. △ Less

Submitted 18 August, 2019; originally announced August 2019.

Comments: submitted to JMMM for ICMF2019 special issue. Uses Elsevier template

Rivalry of diffusion, external field and gravity in micro-convection of magnetic colloids

Authors: Guntars Kitenbergs, Andrejs Cēbers

Abstract: Magnetic fields and magnetic materials have promising microfluidic applications. For example, magnetic micro-convection can enhance mixing considerably. However, previous studies have not explained increased effective diffusion during this phenomenon. Here we show that enhanced interface smearing comes from a gravity induced convective motion within a thin microfluidic channel, caused by a small d… ▽ More Magnetic fields and magnetic materials have promising microfluidic applications. For example, magnetic micro-convection can enhance mixing considerably. However, previous studies have not explained increased effective diffusion during this phenomenon. Here we show that enhanced interface smearing comes from a gravity induced convective motion within a thin microfluidic channel, caused by a small density difference between miscible magnetic and non-magnetic fluids. This motion resembles diffusive behavior and can be described with an effective diffusion coefficient. We explain this with a theoretical model, based on a dimensionless gravitational Rayleigh number, and verify it by numerical simulations and experiments with different cell thicknesses. Results indicate the applicability and limitations for microfluidic applications of other colloidal systems. Residual magnetic micro-convection follows earlier predictions. △ Less

Submitted 9 December, 2019; v1 submitted 14 August, 2019; originally announced August 2019.

Comments: Published in JMMM, in ICMF2019 special issue. Uses Elsevier template

Journal ref: Journal of Magnetism and Magnetic Materials 498 (2020) 166247

Deformation of flexible ferromagnetic filaments under a rotating magnetic field

Authors: Abdelqader Zaben, Guntars Kitenbergs, Andrejs Cēbers

Abstract: Research on magnetic particles dispersed in a fluid medium, actuated by a rotating magnetic field, is becoming increasingly active for both lab-on-chip and bio-sensing applications. In this study, we experimentally investigate the behaviour of ferromagnetic filaments in a rotating field. Filaments are synthesized by linking micron-sized ferromagnetic particles with DNA strands. The experiments wer… ▽ More Research on magnetic particles dispersed in a fluid medium, actuated by a rotating magnetic field, is becoming increasingly active for both lab-on-chip and bio-sensing applications. In this study, we experimentally investigate the behaviour of ferromagnetic filaments in a rotating field. Filaments are synthesized by linking micron-sized ferromagnetic particles with DNA strands. The experiments were conducted under different magnetic field strengths, frequencies and filament sizes, and deformation of the filaments was registered via microscope and camera. The results obtained showed that the body deformation is larger for longer filaments and higher frequencies and lower for larger magnetic field. The angle between the filament tangent at the centre and the magnetic field direction increases linearly with frequency at low-frequency regime. A further increase in the frequency will result in filament movement out of plane when the angle approaches 90 degrees. The experimental results were used to estimate magnetic moment and the bending elasticity of the filament. △ Less

Submitted 23 February, 2020; v1 submitted 7 August, 2019; originally announced August 2019.

Comments: JMMM for ICMF2019 special issue, 5 pages, 7 figures

Journal ref: Journal of Magnetism and Magnetic Materials, 499, 166233 (2020)

Gravity effects on mixing with magnetic micro-convection in microfluidics

Authors: Guntars Kitenbergs, Andrejs Tatuļčenkovs, Lāsma Puķina, Andrejs Cēbers

Abstract: Mixing remains an important problem for development of successful microfluidic and lab-on-a-chip devices, where simple and predictable systems are particularly interesting. One is magnetic micro-convection, an instability happening on the interface of miscible magnetic and non-magnetic fluids in a Hele-Shaw cell under applied field. Previous work proved that Brinkman model quantitatively explains… ▽ More Mixing remains an important problem for development of successful microfluidic and lab-on-a-chip devices, where simple and predictable systems are particularly interesting. One is magnetic micro-convection, an instability happening on the interface of miscible magnetic and non-magnetic fluids in a Hele-Shaw cell under applied field. Previous work proved that Brinkman model quantitatively explains the experiments. However, a gravity caused convective motion complicated the tests. Here we first improve the experimental system to exclude the gravitational convective motion. Afterwards, we observe and quantify how gravity and laminar flow play an important role in stabilizing the perturbations that create the instability. Accordingly, we improve our theoretical model and perform linear analysis. Two dimensionless quantities explain the experimental observations of change in critical field needed for instability and characteristic size of the emerging pattern. Finally, we discuss the conditions at which gravity plays an important role in microfluidic systems. △ Less

Submitted 6 November, 2018; v1 submitted 30 April, 2018; originally announced May 2018.

Comments: Submitted to EPJE for Topical Issue (Flowing Matter, Problems and Applications),(COST Action MP1305)

Journal ref: Eur. Phys. J. E (2018) 41: 138

Motion of magnetotactic bacteria swarms in an external field

Authors: K. Bente, G. Kitenbergs, D. Kriman, K. Erglis, M. Belovs, D. Faivre, A. Cebers

Abstract: Magnetotactic bacteria moving on circular orbits form hydrodynamically bound states. When close to a surface and with the tilting of the field in a direction close to the perpendicular to this surface these swarms move perpendicularly to the tilting angle. We describe quantitatively this motion by a continuum model with couple stress arising from the torques produced by the rotary motors of the am… ▽ More Magnetotactic bacteria moving on circular orbits form hydrodynamically bound states. When close to a surface and with the tilting of the field in a direction close to the perpendicular to this surface these swarms move perpendicularly to the tilting angle. We describe quantitatively this motion by a continuum model with couple stress arising from the torques produced by the rotary motors of the amphitrichous magnetotactic bacteria. The model not only correctly describes the change of direction of swarm motion while inverting the tangential field but also predicts reasonable value of the torque produced by the rotary motors. △ Less

Submitted 10 July, 2017; originally announced July 2017.

Magnetic micro-droplet in rotating field: numerical simulation and comparison with experiment

Authors: Janis Erdmanis, Guntars Kitenbergs, Regine Perzynski, Andrejs Cebers

Abstract: Magnetic droplets obtained by induced phase separation in a magnetic colloid show a large variety of shapes when exposed to an external field. However, the description of shapes is often limited. Here we formulate an algorithm based on three dimensional boundary-integral equations for strongly magnetic droplets in a high-frequency rotating magnetic field, allowing us to find their figures of equil… ▽ More Magnetic droplets obtained by induced phase separation in a magnetic colloid show a large variety of shapes when exposed to an external field. However, the description of shapes is often limited. Here we formulate an algorithm based on three dimensional boundary-integral equations for strongly magnetic droplets in a high-frequency rotating magnetic field, allowing us to find their figures of equilibrium in three dimensions. The algorithm is justified by a series of comparisons with known analytical results. We compare the calculated equilibrium shapes with experimental observations and find a good agreement. The main features of these observations are the oblate-prolate transition, the flattening of prolate shapes with the increase of magnetic field strength and the formation of star-fish like equilibrium shapes. We show both numerically and in experiments that the magnetic droplet behaviour may be described with a tri-axial ellipsoid approximation. Directions for further research are mentioned, including the dipolar interaction contribution to the surface tension of the magnetic droplets, account for the large viscosity contrast between the magnetic droplet and the surrounding fluid. △ Less

Submitted 10 March, 2017; originally announced March 2017.

Comments: This is a first revision of the article, submitted to the Journal of Fluid Mechanics (cambridge.org/core/journals/journal-of-fluid-mechanics)