-
Detection of cyclotron resonance using photo-induced thermionic emission at graphene/MoS2 van der Waals interface
Authors:
Yusai Wakafuji,
Rai Moriya,
Sabin Park,
Kei Kinoshita,
Satoru Masubuchi,
Kenji Watanabe,
Takashi Taniguchi,
Tomoki Machida
Abstract:
We demonstrate the detection of cyclotron resonance in graphene by using a photo-induced thermionic emission mechanism at the graphene/MoS2 van der Waals (vdW) Schottky junction. At cyclotron resonance in Landau-quantized graphene, the infrared light is absorbed and an electron-hole pair is generated. When the energy of a photoexcited electron exceeds the band offset energy at the graphene/MoS2 in…
▽ More
We demonstrate the detection of cyclotron resonance in graphene by using a photo-induced thermionic emission mechanism at the graphene/MoS2 van der Waals (vdW) Schottky junction. At cyclotron resonance in Landau-quantized graphene, the infrared light is absorbed and an electron-hole pair is generated. When the energy of a photoexcited electron exceeds the band offset energy at the graphene/MoS2 interface, the electron transfer occurs from graphene to the conduction band of MoS2, and the hole remains in graphene. This creates an electron-hole separation at the graphene/MoS2 interface at cyclotron resonance and a photovoltage is generated. The proposed method is an infrared photodetection technique through out-of-plane transport at the vdW junction, which is distinct from the previously reported methods that use in-plane transport in graphene for electronic detection of the cyclotron resonance. Despite the simple structure of our device with a single-vdW junction, our method exhibits a very high sensitivity of about 10^6 V/W, which shows an improvement of three orders of magnitude over the previously reported values. Therefore, the proposed method displays a high potential for cyclotron resonance-based infrared photodetector applications.
△ Less
Submitted 31 October, 2019; v1 submitted 18 September, 2019;
originally announced September 2019.
-
Photo-Nernst detection of cyclotron resonance in partially irradiated graphene
Authors:
Kei Kinoshita,
Rai Moriya,
Satoru Masubuchi,
Kenji Watanabe,
Takashi Taniguchi,
Tomoki Machida
Abstract:
Cyclotron resonance of a Landau-quantized graphene can absorb significant amount of infrared light. However, application of this phenomenon to the photodetector had been limited due to the lack of efficient photon to charge conversion scheme. Here, we demonstrate the detection of cyclotron resonance in a partially metal-masked monolayer graphene two-terminal device using photo-Nernst effect. Due t…
▽ More
Cyclotron resonance of a Landau-quantized graphene can absorb significant amount of infrared light. However, application of this phenomenon to the photodetector had been limited due to the lack of efficient photon to charge conversion scheme. Here, we demonstrate the detection of cyclotron resonance in a partially metal-masked monolayer graphene two-terminal device using photo-Nernst effect. Due to the presence of the mask, incident infrared light is irradiated on only one-half of the graphene channel. This partial irradiation creates a temperature gradient perpendicular to the graphene channel. In the presence of an external magnetic field, thermopower is generated perpendicular to the temperature gradient due to the Nernst effect. Consequently, photo-Nernst voltage is generated along the graphene channel, which can be detected from the contacts on both ends of the channel. We demonstrate selective detection of the photo-Nernst effect while minimizing the other photovoltaic contributions, such as the photo-Seebeck effect. We investigate the dependence of the photo-Nernst effect on magnetic field and excitation wavelength, which reveals a significant enhancement of photo-Nernst signal at the cyclotron resonance conditions in graphene. Our finding could facilitate the realization of far-infrared light detector using cyclotron resonance of graphene.
△ Less
Submitted 31 October, 2019; v1 submitted 8 September, 2019;
originally announced September 2019.
-
Dry release transfer of graphene and few-layer h-BN by utilizing thermoplasticity of polypropylene carbonate for fabricating edge-contact-free van der Waals heterostructures
Authors:
Kei Kinoshita,
Rai Moriya,
Momoko Onodera,
Yusai Wakafuji,
Satoru Masubuchi,
Kenji Watanabe,
Takashi Taniguchi,
Tomoki Machida
Abstract:
The dry release transfer of two-dimensional (2D) materials such as graphene, h-BN, and TMDs is a versatile method for fabricating high-quality van der Waals heterostructures. Up until now, polydimethylpolysiloxane (PDMS) sheets have been widely used for the dry release transfer of TMD materials. However, this method has been known to have limitations that make it difficult to transfer few-layer-th…
▽ More
The dry release transfer of two-dimensional (2D) materials such as graphene, h-BN, and TMDs is a versatile method for fabricating high-quality van der Waals heterostructures. Up until now, polydimethylpolysiloxane (PDMS) sheets have been widely used for the dry release transfer of TMD materials. However, this method has been known to have limitations that make it difficult to transfer few-layer-thick graphene and h-BN because of the difficulty to fabricate these materials on PDMS. As an alternative method, we demonstrate the dry release transfer of single- and bi-layer graphene and few-layer h-BN in this study by utilizing poly(propylene) carbonate (PPC) films. Because of the strong adhesion between PPC and 2D materials around room temperature, we demonstrate that single- to few-layer graphene, as well as few-layer h-BN, can be fabricated on a spin-coated PPC film/290-nm-thick SiO2/Si substrate via the mechanical exfoliation method. In addition, we show that these few-layer crystals are clearly distinguishable using an optical microscope with the help of optical interference. Because of the thermoplastic properties of PPC film, the adhesion force between the 2D materials and PPC significantly decreases at about 70 °C. Therefore, we demonstrate that single- to few-layer graphene, as well as few-layer h-BN flakes, on PPC can be easily dry-transferred onto another h-BN substrate. This method enables a multilayer van der Waals heterostructure to be constructed with a minimum amount of polymer contamination. We demonstrate the fabrication of encapsulated h-BN/graphene/h-BN devices and graphene/few-layer h-BN/graphene vertical-tunnel-junction devices using this method. Since devices fabricated by this method do not require an edge-contact scheme, our finding provide a simples method for constructing high-quality graphene and h-BN-based van der Waals heterostructures.
△ Less
Submitted 27 April, 2019;
originally announced April 2019.
-
Photo-thermoelectric detection of cyclotron resonance in asymmetrically carrier-doped graphene two-terminal device
Authors:
Kei Kinoshita,
Rai Moriya,
Miho Arai,
Satoru Masubuchi,
Kenji Watanabe,
Takashi Taniguchi,
Tomoki Machida
Abstract:
Graphene is known to show a significant photo-thermoelectric effect that can exceed its photovoltaic contribution. Here, by utilizing this effect, we demonstrate a photovoltage measurement of cyclotron resonance in a double-back-gated h-BN/graphene/h-BN two-terminal device. A graphite local bottom gate was fabricated in addition to a p-doped Si global back gate. By tuning the two gate voltages, an…
▽ More
Graphene is known to show a significant photo-thermoelectric effect that can exceed its photovoltaic contribution. Here, by utilizing this effect, we demonstrate a photovoltage measurement of cyclotron resonance in a double-back-gated h-BN/graphene/h-BN two-terminal device. A graphite local bottom gate was fabricated in addition to a p-doped Si global back gate. By tuning the two gate voltages, an in-plane graphene junction having an asymmetric carrier-doping profile was created. With the help of this asymmetric structure, the photo-thermoelectric voltage generated in the vicinity of the metal-electrode/graphene junction was detected. At a low temperature and in the presence of a magnetic field, a photo-induced voltage was measured under the irradiation of an infrared laser (Wavelength= 9.28 to 10.61 micron). We observed a strong enhancement of the photovoltage signal under the cyclotron resonance condition, at which the energy of excitation coincides with a transition between Landau levels. These results highlight the possibility of using the photo-thermoelectric effect in graphene for THz photo-detection.
△ Less
Submitted 6 September, 2018;
originally announced September 2018.
-
Dynamics vs electronic states of vortex core of high-T_c superconductors investigated by high-frequency impedance measurement
Authors:
A. Maeda,
Y. Tsuchiya,
K. Iwaya,
K. Kinoshita,
T. Hanaguri,
H. Kitano,
T. Nishizaki,
K. Shibata,
N. Kobayashi,
J. Takeya,
K. Nakamura,
Y. Ando
Abstract:
Dynamics of vortices reflects the electronic states of quasiparticles in the core. To understand this, we investigated the following three issues. (1) We investigated the complex surface impedance, Zs, of YBa2Cu3Oy as a function of magnetic field, H. The total features were well expressed by the Coffey-Clem model. From the data, we estimated the viscosity and pinning frequency, which were found…
▽ More
Dynamics of vortices reflects the electronic states of quasiparticles in the core. To understand this, we investigated the following three issues. (1) We investigated the complex surface impedance, Zs, of YBa2Cu3Oy as a function of magnetic field, H. The total features were well expressed by the Coffey-Clem model. From the data, we estimated the viscosity and pinning frequency, which were found to be independent of frequency. In particular, the obtained viscosity definitely shows that the core of vortex of YBa2Cu3Oy is moderately clean. This result suggests that new physics will show up, for the physics of quantum moderately clean vortex core is unknown at all. (2) An anomaly found in the surface reactance at the first order transition (FOT) of vortex lattice was investigated in Bi2Sr2CaCu2Oy with various doping levels. As a result, the anomaly was found only in the samples exhibiting the FOT. On the other hand, we did not observe the anomaly in YBa2Cu3Oy. These suggest that the anomaly is due to the change in the electronic states of the vortices characteristic of materials with very strong anisotropy. (3) We measured H dependence of both the thermal conductivity κ(H) and Zs(H) in exactly the same pieces of crystal. We could not find any anomaly in Zs(H) even at the onset of the plateau. This result suggests that the origin of the plateau in κ(H) is not a drastic phase transition but is rather gradual crossover.
△ Less
Submitted 1 February, 2001;
originally announced February 2001.
-
The electronic state of vortices in YBa2Cu3Oy investigated by complex surface impedance measurement
Authors:
Yoshishige Tsuchiya,
Katsuya Iwaya,
Kentarou Kinoshita,
Tetsuo Hanaguri,
Haruhisa Kitano,
Atsutaka Maeda,
Kenji Shibata,
Terukazu Nishizaki,
Norio Kobayashi
Abstract:
The electromagnetic response to microwaves in the mixed state of YBa2Cu3Oy(YBCO) was measured in order to investigate the electronic state inside and outside the vortex core. The magnetic-field dependence of the complex surface impedance at low temperatures was in good agreement with a general vortex dynamics description assuming that the field-independent viscous damping force and the linear re…
▽ More
The electromagnetic response to microwaves in the mixed state of YBa2Cu3Oy(YBCO) was measured in order to investigate the electronic state inside and outside the vortex core. The magnetic-field dependence of the complex surface impedance at low temperatures was in good agreement with a general vortex dynamics description assuming that the field-independent viscous damping force and the linear restoring force were acting on the vortices. In other words, both real and imaginary parts of the complex resistivity, ρ_1, and ρ_2, were linear in B. This is explained by theories for d-wave superconductors. Using analysis based on the Coffey-Clem description of the complex penetration depth, we estimated that the vortex viscosity ηat 10 K was (4 \sim 5) \times 10^{-7} Ns/m^2. This value corresponds to ω_0 τ\sim 0.3 - 0.5, where ω_0 and τare the minimal gap frequency and the quasiparticle lifetime in the vortex core, respectively. These results suggest that the vortex core in YBCO is in the moderately clean regime. Investigation of the moderately clean vortex core in high-temperature superconductors is significant because physically new effects may be expected due to d-wave characteristics and to the quantum nature of cuprate superconductors. The behavior of Z_s as a function of B across the first order transition (FOT) of the vortex lattice was also investigated. Unlike Bi2Sr2CaCu2Oy (BSCCO), no distinct anomaly was observed around the FOT in YBCO. Our results suggest that the rapid increase of X_s due to the change of superfluid density at the FOT would be observed only in highly anisotropic two-dimensional vortex systems like BSCCO. We discuss these results in terms of the difference of the interlayer coupling and the energy scale between the two materials.
△ Less
Submitted 8 March, 2001; v1 submitted 1 February, 2001;
originally announced February 2001.
