Showing 1–7 of 7 results for author: Kinge, S

Quantifying the contribution of material and junction resistances in nano-networks

Authors: Cian Gabbett, Adam G. Kelly, Emmet Coleman, Luke Doolan, Tian Carey, Kevin Synnatschke, Shixin Liu, Anthony Dawson, Domhnall OSuilleabhain, Jose Munuera, Eoin Caffrey, John B. Boland, Zdenek Sofer, Goutam Ghosh, Sachin Kinge, Laurens D. A. Siebbeles, Neelam Yadav, Jagdish K. Vij, Muhammad Awais Aslam, Aleksandar Matkovic, Jonathan N. Coleman

Abstract: Networks of nanowires and nanosheets are important for many applications in printed electronics. However, the network conductivity and mobility are usually limited by the inter-particle junction resistance, a property that is challenging to minimise because it is difficult to measure. Here, we develop a simple model for conduction in networks of 1D or 2D nanomaterials, which allows us to extract j… ▽ More Networks of nanowires and nanosheets are important for many applications in printed electronics. However, the network conductivity and mobility are usually limited by the inter-particle junction resistance, a property that is challenging to minimise because it is difficult to measure. Here, we develop a simple model for conduction in networks of 1D or 2D nanomaterials, which allows us to extract junction and nanoparticle resistances from particle-size-dependent D.C. resistivity data of conducting and semiconducting materials. We find junction resistances in porous networks to scale with nanoparticle resistivity and vary from 5 Ohm for silver nanosheets to 25 GOhm for WS2 nanosheets. Moreover, our model allows junction and nanoparticle resistances to be extracted from A.C. impedance spectra of semiconducting networks. Impedance data links the high mobility (~7 cm2/Vs) of aligned networks of electrochemically exfoliated MoS2 nanosheets to low junction resistances of ~670 kOhm. Temperature-dependent impedance measurements allow us to quantitatively differentiate intra-nanosheet phonon-limited band-like transport from inter-nanosheet hopping for the first time. △ Less

Submitted 28 November, 2023; originally announced November 2023.

Comments: 5 figures

Effects of structure and temperature on the nature of excitons in the Mo0.6W0.4S2 alloys

Authors: Deepika Poonia, Nisha Singh, Jeff J. P. M. Schulpen, Marco van der Laan, Sourav Maiti, Michele Failla, Sachin Kinge, Ageeth A. Bol, Peter Schall, Laurens D. A. Siebbeles

Abstract: We have studied the nature of excitons in the transition metal dichalcogenide alloy Mo0.6W0.4 S2, compared to pure MoS2 and WS2 grown by atomic layer deposition (ALD). For this, optical absorption/transmission spectroscopy and time-dependent density functional theory (TDDFT) were used. Effects of temperature on the A and B exciton peak energies and linewidths in the optical transmission spectra we… ▽ More We have studied the nature of excitons in the transition metal dichalcogenide alloy Mo0.6W0.4 S2, compared to pure MoS2 and WS2 grown by atomic layer deposition (ALD). For this, optical absorption/transmission spectroscopy and time-dependent density functional theory (TDDFT) were used. Effects of temperature on the A and B exciton peak energies and linewidths in the optical transmission spectra were compared between the alloy and pure MoS2 and WS2. On increasing the temperature from 25 K to 293 K the energy of the A and B exciton peaks decreases, while their linewidth increases due to exciton-phonon interactions. The exciton-phonon interactions in the alloy are closer to those for MoS2 than WS2. This suggests that the exciton wave functions in the alloy have a larger amplitude on Mo atoms than on W atoms. The experimental absorption spectra could be reproduced by TDDFT calculations. Interestingly, for the alloy the Mo and W atoms had to be distributed over all layers. Conversely, we could not reproduce the experimental alloy spectrum by calculations on a structure with alternating layers, in which every other layer contains only Mo atoms and the layers in between also W atoms. For the latter atomic arrangement, the TDDFT calculations yielded an additional optical absorption peak that could be due to excitons with some charge transfer character. From these results we conclude that ALD yields an alloy in which Mo and W atoms are distributed uniformly among all layers. △ Less

Submitted 24 November, 2021; originally announced November 2021.

Unraveling the Photophysics of Liquid-Phase Exfoliated Two-Dimensional ReS2 Nanoflakes

Authors: Pieter Schiettecatte, Deepika Poonia, Ivo Tanghe, Sourav Maiti, Michele Failla, Sachin Kinge, Zeger Hens, Laurens D. A. Siebbeles, Pieter Geiregat

Abstract: Few-layered transition metal dichalcogenides (TMDs) are increasingly popular materials for optoelectronics and catalysis. Amongst the various types of TMDs available today, rhenium-chalcogenides (ReX2) stand out due to their remarkable electronic structure, such as the occurrence of anisotropic excitons and potential direct bandgap behavior throughout multi-layered stacks. In this letter, we have… ▽ More Few-layered transition metal dichalcogenides (TMDs) are increasingly popular materials for optoelectronics and catalysis. Amongst the various types of TMDs available today, rhenium-chalcogenides (ReX2) stand out due to their remarkable electronic structure, such as the occurrence of anisotropic excitons and potential direct bandgap behavior throughout multi-layered stacks. In this letter, we have analyzed the nature and dynamics of charge carriers in highly crystalline liquid-phase exfoliated ReS2, using a unique combination of optical pump-THz probe and broadband transient absorption spectroscopy. Two distinct time regimes are identified, both of which are dominated by unbound charge carriers despite the high exciton binding energy. In the first time regime, the unbound charge carriers cause an increase and a broadening of the exciton absorption band. In the second time regime, a peculiar narrowing of the excitonic absorption profile is observed, which we assign to the presence of built-in fields and/or charged defects. Our results pave the way to analyze spectrally complex transient absorption measurements on layered TMD materials and indicate the potential for ReS2 to produce mobile free charge carriers, a feat relevant for photovoltaic applications. △ Less

Submitted 20 May, 2021; originally announced May 2021.

Emergence of New Materials for Exploiting Highly Efficient Carrier Multiplication in Photovoltaics

Authors: Sourav Maiti, Marco van der Laan, Deepika Poonia, Peter Schall, Sachin Kinge, Laurens D. A. Siebbeles

Abstract: In conventional solar cell semiconductor materials (predominantly Si) photons with energy higher than the band gap initially generate hot electrons and holes, which subsequently cool down to the band edge by phonon emission. Due to the latter process, the energy of the charge carriers in excess of the band gap is lost as heat and does not contribute to the conversion of solar to electrical power.… ▽ More In conventional solar cell semiconductor materials (predominantly Si) photons with energy higher than the band gap initially generate hot electrons and holes, which subsequently cool down to the band edge by phonon emission. Due to the latter process, the energy of the charge carriers in excess of the band gap is lost as heat and does not contribute to the conversion of solar to electrical power. If the excess energy is more than the band gap it can in principle be utilized through a process known as carrier multiplication (CM) in which a single absorbed photon generates two (or more) pairs of electrons and holes. Thus, through CM the photon energy above twice the band gap enhances the photocurrent of a solar cell. In this review, we discuss recent progress in CM research in terms of fundamental understanding, emergence of new materials for efficient CM, and CM based solar cell applications. Based on our current understanding, the CM threshold can get close to the minimal value of twice the band gap in materials where a photon induces an asymmetric electronic transition from a deeper valence band or to a higher conduction band. In addition, the material must have a low exciton binding energy and high charge carrier mobility, so that photoexcitation leads directly to the formation of free charges that can readily be extracted at external electrodes of a photovoltaic device. Percolative networks of coupled PbSe quantum dots, Sn/Pb based halide perovskites, and transition metal dichalcogenides such as MoTe2 fulfill these requirements to a large extent. These findings point towards promising prospects for further development of new materials for highly efficient photovoltaics. △ Less

Submitted 19 August, 2020; v1 submitted 18 August, 2020; originally announced August 2020.

Change in Tetracene Polymorphism Facilitates Triplet Transfer in Singlet Fission-Sensitized Silicon Solar Cells

Authors: Benjamin Daiber, Sourav Maiti, Silvia Ferro, Joris Bodin, Alyssa F. J. van den Boom, Stefan L. Luxembourg, Sachin Kinge, Sidharam Pujari, Han Zuilhof, Laurens D. A. Siebbeles, Bruno Ehrler

Abstract: Singlet fission in tetracene generates two triplet excitons per absorbed photon. If these triplet excitons can be effectively transferred into silicon (Si) then additional photocurrent can be generated from photons above the bandgap of Si. This could alleviate the thermalization loss and increase the efficiency of conventional Si solar cells. Here we show that a change in the polymorphism of tetra… ▽ More Singlet fission in tetracene generates two triplet excitons per absorbed photon. If these triplet excitons can be effectively transferred into silicon (Si) then additional photocurrent can be generated from photons above the bandgap of Si. This could alleviate the thermalization loss and increase the efficiency of conventional Si solar cells. Here we show that a change in the polymorphism of tetracene deposited on Si due to air exposure, facilitates triplet transfer from tetracene into Si. Magnetic field-dependent photocurrent measurements confirm that triplet excitons contribute to the photocurrent. The decay of tetracene delayed photoluminescence was used to determine a triplet transfer time of 215 ns and a maximum yield of triplet transfer into Si of ~50 %. Our study suggests that control over the morphology of tetracene during deposition will be of great importance to boost the triplet transfer yield further. △ Less

Submitted 14 July, 2020; originally announced July 2020.

Photoexcitation of PbS Nanosheets Leads to Highly Mobile Charge Carriers and Stable Excitons

Authors: Jannika Lauth, Michele Failla, Eugen Klein, Christian Klinke, Sachin Kinge, Laurens D. A. Siebbeles

Abstract: Solution-processable two-dimensional (2D) semiconductors with chemically tunable thickness and associated tunable band gaps are highly promising materials for ultrathin optoelectronics. Here, the properties of free charge carriers and excitons in 2D PbS nanosheets of different thickness are investigated by means of optical pump-terahertz probe spectroscopy. By analyzing the frequency-dependent THz… ▽ More Solution-processable two-dimensional (2D) semiconductors with chemically tunable thickness and associated tunable band gaps are highly promising materials for ultrathin optoelectronics. Here, the properties of free charge carriers and excitons in 2D PbS nanosheets of different thickness are investigated by means of optical pump-terahertz probe spectroscopy. By analyzing the frequency-dependent THz response, a large quantum yield of excitons is found. The scattering time of free charge carriers increases with nanosheet thickness, which is ascribed to reduced effects of surface defects and ligands in thicker nanosheets. The data discussed provide values for the DC mobility in the range 550 - 1000 cm2/Vs for PbS nanosheets with thicknesses ranging from 4 to 16 nm. Results underpin the suitability of colloidal 2D PbS nanosheets for optoelectronic applications. △ Less

Submitted 13 August, 2019; originally announced August 2019.

Ligand-Surface Interactions and Surface Oxidation of Colloidal PbSe Quantum Dots Revealed by Thin-film Positron Annihilation Methods

Authors: Wenqin Shi, Stephan W. H. Eijt, C. S. Suchand Sandeep, Laurens D. A. Siebbeles, Arjan J. Houtepen, Sachin Kinge, Ekkes Brück, Bernardo Barbiellini, Arun Bansil

Abstract: Positron Two Dimensional Angular Correlation of Annihilation Radiation (2D-ACAR) measurements reveal modifications of the electronic structure and composition at the surfaces of PbSe quantum dots (QDs), deposited as thin films, produced by various ligands containing either oxygen or nitrogen atoms. In particular, the 2D-ACAR measurements on thin films of colloidal PbSe QDs capped with oleic acid l… ▽ More Positron Two Dimensional Angular Correlation of Annihilation Radiation (2D-ACAR) measurements reveal modifications of the electronic structure and composition at the surfaces of PbSe quantum dots (QDs), deposited as thin films, produced by various ligands containing either oxygen or nitrogen atoms. In particular, the 2D-ACAR measurements on thin films of colloidal PbSe QDs capped with oleic acid ligands yield an increased intensity in the electron momentum density (EMD) at high momenta compared to PbSe quantum dots capped with oleylamine. Moreover, the EMD of PbSe QDs is strongly affected by the small ethylediamine ligands, since these molecules lead to small distances between QDs and favor neck formation between near neighbor QDs, inducing electronic coupling between neighboring QDs. The high sensitivity to the presence of oxygen atoms at the surface can be also exploited to monitor the surface oxidation of PbSe QDs upon exposure to air. Our study clearly demonstrates that positron annihilation spectroscopy applied to thin films can probe surface transformations of colloidal semiconductor QDs embedded in functional layers. △ Less

Submitted 8 March, 2016; originally announced March 2016.

Comments: 20 pages, 4 figures, Supplemental Material (5 pages)

Journal ref: Applied Physics Letters 108, 081602 (2016)