-
A continuously-cooled 3He/4He phase separation refrigerator
Authors:
P. H. Kim,
M. Hirschel,
J. Suranyi,
J. P. Davis
Abstract:
We present a novel cooling method that uses the phase separation and evaporative cooling of 3He to reach and continuously maintain sub-kelvin temperatures. While less complex than a dilution refrigerator, the system performs similarly to a continuous 3He cryostat but with a simpler design, a more efficient cooldown process, and a significantly smaller 3He requirement. Our prototype demonstrated a…
▽ More
We present a novel cooling method that uses the phase separation and evaporative cooling of 3He to reach and continuously maintain sub-kelvin temperatures. While less complex than a dilution refrigerator, the system performs similarly to a continuous 3He cryostat but with a simpler design, a more efficient cooldown process, and a significantly smaller 3He requirement. Our prototype demonstrated a base temperature of 585 mK and 3 mW cooling power at 700 mK using just two gaseous liters of 3He. Lower temperatures could be expected in systems with improved heat exchangers and pumping efficiency.
△ Less
Submitted 13 March, 2025;
originally announced March 2025.
-
Observation of bistable turbulence in quasi-two-dimensional superflow
Authors:
E. Varga,
V. Vadakkumbatt,
A. J. Shook,
P. H. Kim,
J. P. Davis
Abstract:
Turbulent flow restricted to two dimensions can spontaneously develop order on large scales, defying entropy expectations and in sharp contrast with turbulence in three dimensions where nonlinear turbulent processes act to destroy large-scale order. In this work we report the observation of unusual turbulent behavior in steady-state flow of superfluid \4He---a liquid with vanishing viscosity and d…
▽ More
Turbulent flow restricted to two dimensions can spontaneously develop order on large scales, defying entropy expectations and in sharp contrast with turbulence in three dimensions where nonlinear turbulent processes act to destroy large-scale order. In this work we report the observation of unusual turbulent behavior in steady-state flow of superfluid \4He---a liquid with vanishing viscosity and discrete vorticity---in a nearly two-dimensional channel. Surprisingly, for a range of experimental parameters, turbulence is observed to exist in two bistable states. This bistability can be well explained by the appearance of large-scale regions of flow of opposite vorticity.
△ Less
Submitted 3 July, 2020; v1 submitted 2 March, 2020;
originally announced March 2020.
-
Stabilized Pair Density Wave via Nanoscale Confinement of Superfluid $^3$He
Authors:
A. J. Shook,
V. Vadakumbatt,
P. Senarath Yapa,
C. Doolin,
R. Boyack,
P. H. Kim,
G. G. Popowich,
F. Souris,
H. Christani,
J. Maciejko,
J. P. Davis
Abstract:
Superfluid $^3$He under nanoscale confinement has generated significant interest due to the rich spectrum of phases with complex order parameters that may be stabilized. Experiments have uncovered a variety of interesting phenomena, but a complete picture of superfluid $^3$He under confinement has remained elusive. Here, we present phase diagrams of superfluid $^3$He under varying degrees of uniax…
▽ More
Superfluid $^3$He under nanoscale confinement has generated significant interest due to the rich spectrum of phases with complex order parameters that may be stabilized. Experiments have uncovered a variety of interesting phenomena, but a complete picture of superfluid $^3$He under confinement has remained elusive. Here, we present phase diagrams of superfluid $^3$He under varying degrees of uniaxial confinement, over a wide range of pressures, which elucidate the progressive stability of both the $A$-phase, as well as a growing region of stable pair density wave (PDW) state.
△ Less
Submitted 12 December, 2019; v1 submitted 5 August, 2019;
originally announced August 2019.
-
Coherent Magneto-Optomechanical Signal Transduction and Long-Distance Phase-Shift Keying
Authors:
M. J. Rudd,
P. H. Kim,
C. A. Potts,
C. Doolin,
H. Ramp,
B. D. Hauer,
J. P. Davis
Abstract:
A transducer capable of converting quantum information stored as microwaves into telecom-wavelength signals is a critical piece of future quantum technology as it promises to enable the networking of quantum processors. Cavity optomechanical devices that are simultaneously coupled to microwave fields and optical resonances are being pursued in this regard. Yet even in the classical regime, develop…
▽ More
A transducer capable of converting quantum information stored as microwaves into telecom-wavelength signals is a critical piece of future quantum technology as it promises to enable the networking of quantum processors. Cavity optomechanical devices that are simultaneously coupled to microwave fields and optical resonances are being pursued in this regard. Yet even in the classical regime, developing optical modulators based on cavity optomechanics could provide lower power or higher bandwidth alternatives to current technology. Here we demonstrate a magnetically-mediated wavelength conversion technique, based on mixing high frequency tones with an optomechanical torsional resonator. This process can act either as an optical phase or amplitude modulator depending on the experimental configuration, and the carrier modulation is always coherent with the input tone. Such coherence allows classical information transduction and transmission via the technique of phase-shift keying. We demonstrate that we can encode up to eight bins of information, corresponding to three bits, simultaneously and demonstrate the transmission of an 52,500 pixel image over 6 km of optical fiber with just 0.67% error. Furthermore, we show that magneto-optomechanical transduction can be described in a fully quantum manner, implying that this is a viable approach to signal transduction at the single quantum level.
△ Less
Submitted 16 April, 2019;
originally announced April 2019.
-
Dueling Dynamical Backaction in a Cryogenic Optomechanical Cavity
Authors:
B. D. Hauer,
T. J. Clark,
P. H. Kim,
C. Doolin,
J. P. Davis
Abstract:
Dynamical backaction has proven to be a versatile tool in cavity optomechanics, allowing for precise manipulation of a mechanical resonator's motion using confined optical photons. In this work, we present measurements of a silicon whispering-gallery-mode optomechanical cavity where backaction originates from opposing radiation pressure and photothermal forces, with the former dictating the optome…
▽ More
Dynamical backaction has proven to be a versatile tool in cavity optomechanics, allowing for precise manipulation of a mechanical resonator's motion using confined optical photons. In this work, we present measurements of a silicon whispering-gallery-mode optomechanical cavity where backaction originates from opposing radiation pressure and photothermal forces, with the former dictating the optomechanical spring effect and the latter governing the optomechanical damping. At high enough optical input powers, we show that the photothermal force drives the mechanical resonator into self-oscillations for a pump beam detuned to the lower-frequency side of the optical resonance, contrary to what one would expect for a radiation-pressure-dominated optomechanical device. Using a fully nonlinear model, we fit the hysteretic response of the optomechanical cavity to extract its properties, demonstrating that this non-sideband-resolved device exists in a regime where photothermal damping could be used to cool its motion to the quantum ground state.
△ Less
Submitted 13 January, 2019;
originally announced January 2019.
-
Broadband optomechanical transduction of nanomagnetic spin modes
Authors:
P. H. Kim,
F. Fani Sani,
M. R. Freeman,
J. P. Davis
Abstract:
The stable vortex state that occurs in micron-scale magnetic disks is one of the most interesting and potentially useful phenomenon in nanomagnetism. A variety of tools have been applied to study the vortex state, and collective spin excitations corresponding to harmonic motion of the vortex, but to-date these tools have measured either strongly driven vortex resonances or have been unable to simu…
▽ More
The stable vortex state that occurs in micron-scale magnetic disks is one of the most interesting and potentially useful phenomenon in nanomagnetism. A variety of tools have been applied to study the vortex state, and collective spin excitations corresponding to harmonic motion of the vortex, but to-date these tools have measured either strongly driven vortex resonances or have been unable to simultaneously measure static properties such as the magnetization. Here we show that by combining the sensitivity of cavity optomechanics with the technique of torque mixing resonance spectroscopy, we are able to measure the magnetization, in-plane susceptibility, and spin resonances of individual vortices in the low-drive limit. These measurements elucidate the complex behavior of the vortex as it moves through the pinning landscape of the disk. Furthermore, we observe gyrotropic resonances as high as 1.1 GHz, suggesting the use of engineering defects for applications such as microwave-to-optical wavelength conversion.
△ Less
Submitted 10 May, 2018;
originally announced May 2018.
-
Two-Level System Damping in a Quasi-One-Dimensional Optomechanical Resonator
Authors:
B. D. Hauer,
P. H. Kim,
C. Doolin,
F. Souris,
J. Davis
Abstract:
Nanomechanical resonators have demonstrated great potential for use as versatile tools in a number of emerging quantum technologies. For such applications, the performance of these systems is restricted by the decoherence of their fragile quantum states, necessitating a thorough understanding of their dissipative coupling to the surrounding environment. In bulk amorphous solids, these dissipation…
▽ More
Nanomechanical resonators have demonstrated great potential for use as versatile tools in a number of emerging quantum technologies. For such applications, the performance of these systems is restricted by the decoherence of their fragile quantum states, necessitating a thorough understanding of their dissipative coupling to the surrounding environment. In bulk amorphous solids, these dissipation channels are dominated at low temperatures by parasitic coupling to intrinsic two-level system (TLS) defects, however, there remains a disconnect between theory and experiment on how this damping manifests in dimensionally-reduced nanomechanical resonators. Here, we present an optomechanically-mediated thermal ringdown technique, which we use to perform simultaneous measurements of the dissipation in four mechanical modes of a cryogenically-cooled silicon nanoresonator, with resonant frequencies ranging from 3 - 19 MHz. Analyzing the device's mechanical damping rate at fridge temperatures between 10 mK - 10 K, we demonstrate quantitative agreement with the standard tunneling model for TLS ensembles confined to one dimension. From these fits, we extract the defect density of states ($P_0 \sim$ 1 - 4 $\times$ 10$^{44}$ J$^{-1}$ m$^{-3}$) and deformation potentials ($γ\sim$ 1 - 2 eV), showing that each mechanical mode couples on average to less than a single thermally-active defect at 10 mK.
△ Less
Submitted 12 October, 2018; v1 submitted 25 October, 2017;
originally announced October 2017.
-
Magnetic Actuation and Feedback Cooling of a Cavity Optomechanical Torque Sensor
Authors:
P. H. Kim,
B. D. Hauer,
T. J. Clark,
F. Fani Sani,
M. R. Freeman,
J. P. Davis
Abstract:
We demonstrate the integration of a mesoscopic ferromagnetic needle with a cavity optomechanical torsional resonator, and its use for quantitative determination of the needle's magnetic properties, as well as amplification and cooling of the resonator motion. With this system we measure torques as small as 32 zNm, corresponding to sensing an external magnetic field of 0.12 A/m (150 nT). Furthermor…
▽ More
We demonstrate the integration of a mesoscopic ferromagnetic needle with a cavity optomechanical torsional resonator, and its use for quantitative determination of the needle's magnetic properties, as well as amplification and cooling of the resonator motion. With this system we measure torques as small as 32 zNm, corresponding to sensing an external magnetic field of 0.12 A/m (150 nT). Furthermore, we are able to extract the magnetization (1710 kA/m) of the magnetic sample, not known a priori, demonstrating this system's potential for studies of nanomagnetism. Finally, we show that we can magnetically drive the torsional resonator into regenerative oscillations, and dampen its mechanical mode temperature from room temperature to 11.6 K, without sacrificing torque sensitivity.
△ Less
Submitted 29 July, 2017;
originally announced July 2017.
-
Ultra-Low Dissipation Superfluid Micromechanical Resonator
Authors:
Fabien Souris,
Xavier Rojas,
Paul H. Kim,
John P. Davis
Abstract:
Micro and nanomechanical resonators with ultra-low dissipation have great potential as useful quantum resources. The superfluid micromechanical resonators presented here possess several advantageous characteristics: straightforward thermalization, dissipationless flow, and in situ tunability. We identify and quantitatively model the various dissipation mechanisms in two resonators, one fabricated…
▽ More
Micro and nanomechanical resonators with ultra-low dissipation have great potential as useful quantum resources. The superfluid micromechanical resonators presented here possess several advantageous characteristics: straightforward thermalization, dissipationless flow, and in situ tunability. We identify and quantitatively model the various dissipation mechanisms in two resonators, one fabricated from borosilicate glass and one from single crystal quartz. As the resonators are cryogenically cooled into the superfluid state, the damping from thermal effects and from the normal fluid component are strongly suppressed. At our lowest temperatures, damping is limited solely by internal dissipation in the substrate materials, and reach quality factors up to 913,000 at 13 mK. By lifting this limitation through substrate material choice and resonator design, modelling suggests that the resonators should reach quality factors as high as 10$^8$ at 100 mK, putting this architecture in an ideal position to harness mechanical quantum effects.
△ Less
Submitted 3 August, 2016;
originally announced August 2016.
-
Approaching the Standard Quantum Limit of Mechanical Torque Sensing
Authors:
P. H. Kim,
B. D. Hauer,
C. Doolin,
F. Souris,
J. P. Davis
Abstract:
Mechanical transduction of torque has been key to probing a number of physical phenomena, such as gravity, the angular momentum of light, the Casimir effect, magnetism, and quantum oscillations. Following similar trends as mass and force sensing, mechanical torque sensitivity can be dramatically improved by scaling down the physical dimensions, and therefore moment of inertia, of a torsional sprin…
▽ More
Mechanical transduction of torque has been key to probing a number of physical phenomena, such as gravity, the angular momentum of light, the Casimir effect, magnetism, and quantum oscillations. Following similar trends as mass and force sensing, mechanical torque sensitivity can be dramatically improved by scaling down the physical dimensions, and therefore moment of inertia, of a torsional spring. Yet now, through precision nanofabrication and sub-wavelength cavity optomechanics, we have reached a point where geometric optimization can only provide marginal improvements to torque sensitivity. Instead, nanoscale optomechanical measurements of torque are overwhelmingly hindered by thermal noise. Here we present cryogenic measurements of a cavity-optomechanical torsional resonator cooled in a dilution refrigerator to a temperature of 25 mK, corresponding to an average phonon occupation of <n> = 35, that demonstrate a record-breaking torque sensitivity of 2.9 yNm/Hz^{1/2}. This a 270-fold improvement over previous optomechanical torque sensors and just over an order of magnitude from its standard quantum limit. Furthermore, we demonstrate that mesoscopic test samples, such as micron-scale superconducting disks, can be integrated with our cryogenic optomechanical torque sensing platform, in contrast to other cryogenic optomechanical devices, opening the door for mechanical torque spectroscopy of intrinsically quantum systems.
△ Less
Submitted 30 June, 2016;
originally announced July 2016.
-
Optomechanics and thermometry of cryogenic silica microresonators
Authors:
A. J. R. MacDonald,
B. D. Hauer,
X. Rojas,
P. H. Kim,
G. G. Popowich,
J. P. Davis
Abstract:
We present measurements of silica optomechanical resonators, known as bottle resonators, passively cooled in a cryogenic environment. These devices possess a suite of properties that make them advantageous for preparation and measurement in the mechanical ground state, including high mechanical frequency, high optical and mechanical quality factors, and optomechanical sideband resolution. Performi…
▽ More
We present measurements of silica optomechanical resonators, known as bottle resonators, passively cooled in a cryogenic environment. These devices possess a suite of properties that make them advantageous for preparation and measurement in the mechanical ground state, including high mechanical frequency, high optical and mechanical quality factors, and optomechanical sideband resolution. Performing thermometry of the mechanical motion, we find that the optical and mechanical modes demonstrate quantitatively similar laser-induced heating, limiting the lowest average phonon occupation observed to just ~1500. Thermalization to the 9 mK thermal bath would facilitate quantum measurements on these promising nanogram-scale mechanical resonators.
△ Less
Submitted 5 September, 2015;
originally announced September 2015.
-
Optical microscope and tapered fiber coupling apparatus for a dilution refrigerator
Authors:
A. J. R. MacDonald,
G. G. Popowich,
B. D. Hauer,
P. H. Kim,
A. Fredrick,
X. Rojas,
P. Doolin,
J. P. Davis
Abstract:
We have developed a system for tapered fiber measurements of optomechanical resonators inside a dilution refrigerator, which is compatible with both on- and off-chip devices. Our apparatus features full three-dimensional control of the taper-resonator coupling conditions enabling critical coupling, with an overall fiber transmission efficiency of up to 70%. Notably, our design incorporates an opti…
▽ More
We have developed a system for tapered fiber measurements of optomechanical resonators inside a dilution refrigerator, which is compatible with both on- and off-chip devices. Our apparatus features full three-dimensional control of the taper-resonator coupling conditions enabling critical coupling, with an overall fiber transmission efficiency of up to 70%. Notably, our design incorporates an optical microscope system consisting of a coherent bundle of 37,000 optical fibers for real-time imaging of the experiment at a resolution of $\sim$1 $μ$m. We present cryogenic optical and optomechanical measurements of resonators coupled to tapered fibers at temperatures as low as 9 mK.
△ Less
Submitted 27 November, 2014;
originally announced November 2014.
-
Nonlinear optomechanics in the stationary regime
Authors:
C. Doolin,
B. D. Hauer,
P. H. Kim,
A. J. R. MacDonald,
H. Ramp,
J. P. Davis
Abstract:
We have observed nonlinear transduction of the thermomechanical motion of a nanomechanical resonator when detected as laser transmission through a sideband unresolved optomechanical cavity. Nonlinear detection mechanisms are of considerable interest as special cases allow for quantum nondemolition measurements of the mechanical resonator's energy. We investigate the origin of the nonlinearity in t…
▽ More
We have observed nonlinear transduction of the thermomechanical motion of a nanomechanical resonator when detected as laser transmission through a sideband unresolved optomechanical cavity. Nonlinear detection mechanisms are of considerable interest as special cases allow for quantum nondemolition measurements of the mechanical resonator's energy. We investigate the origin of the nonlinearity in the optomechanical detection apparatus and derive a theoretical framework for the nonlinear signal transduction, and the optical spring effect, from both nonlinearities in the optical transfer function and second order optomechanical coupling. By measuring the dependence of the linear and nonlinear signal transduction -- as well as the mechanical frequency shift -- on laser detuning from optical resonance, we provide estimates of the contributions from the linear and quadratic optomechanical couplings.
△ Less
Submitted 14 February, 2014;
originally announced February 2014.
-
On-Chip Cavity Optomechanical Coupling
Authors:
Bradley D Hauer,
Paul H Kim,
Callum Doolin,
Allison JR MacDonald,
Hugh Ramp,
John P Davis
Abstract:
On-chip cavity optomechanics, in which strong co-localization of light and mechanical motion is engineered, relies on efficient coupling of light both into and out of the on-chip optical resonator. Here we detail our particular style of tapered and dimpled optical fibers, pioneered by the Painter group at Caltech, which are a versatile and reliable solution to efficient on-chip coupling. First, a…
▽ More
On-chip cavity optomechanics, in which strong co-localization of light and mechanical motion is engineered, relies on efficient coupling of light both into and out of the on-chip optical resonator. Here we detail our particular style of tapered and dimpled optical fibers, pioneered by the Painter group at Caltech, which are a versatile and reliable solution to efficient on-chip coupling. First, a brief overview of tapered, single mode fibers is presented, in which the single mode cutoff diameter is highlighted. The apparatus used to create a dimpled tapered fiber is then described, followed by a comprehensive account of the procedure by which a dimpled tapered fiber is produced and mounted in our system. The custom-built optical access vacuum chambers in which our on-chip optomechanical measurements are performed are then discussed. Finally, the process by which our optomechanical devices are fabricated and the method by which we explore their optical and mechanical properties is explained. It is our expectation that this manuscript will enable the novice to develop advanced optomechanical experiments.
△ Less
Submitted 21 January, 2014;
originally announced January 2014.
-
Multidimensional optomechanical cantilevers for high frequency atomic force microscopy
Authors:
C. Doolin,
P. H. Kim,
B. D. Hauer,
A. J. R MacDonald,
J. P Davis
Abstract:
High-frequency atomic force microscopy has enabled extraordinary new science through large bandwidth, high speed measurements of atomic and molecular structures. However, traditional optical detection schemes restrict the dimensions, and therefore the frequency, of the cantilever - ultimately setting a limit to the time resolution of experiments. Here we demonstrate optomechanical detection of low…
▽ More
High-frequency atomic force microscopy has enabled extraordinary new science through large bandwidth, high speed measurements of atomic and molecular structures. However, traditional optical detection schemes restrict the dimensions, and therefore the frequency, of the cantilever - ultimately setting a limit to the time resolution of experiments. Here we demonstrate optomechanical detection of low-mass, high-frequency nanomechanical cantilevers (up to 20 MHz) that surpass these limits, anticipating their use for single-molecule force measurements. These cantilevers achieve 2 fm / sqrt(Hz) displacement noise floors, and force sensitivity down to 132 aN / sqrt(Hz). Furthermore, the ability to resolve both in-plane and out-of-plane motion of our cantilevers opens the door for ultrasensitive multidimensional force spectroscopy, and optomechanical interactions, such as tuning of the cantilever frequency in situ, provide new opportunities in high-speed, high-resolution experiments.
△ Less
Submitted 16 August, 2013;
originally announced August 2013.
-
Nanoscale Torsional Optomechanics
Authors:
P. H. Kim,
C. Doolin,
B. D. Hauer,
A. J. R. MacDonald,
M. R. Freeman,
P. E. Barclay,
J. P. Davis
Abstract:
Optomechanical transduction is demonstrated for nanoscale torsional resonators evanescently coupled to optical microdisk whispering gallery mode resonators. The on-chip, integrated devices are measured using a fully fiber-based system, including a tapered and dimpled optical fiber probe. With a thermomechanically calibrated optomechanical noise floor down to 7 fm/sqrt(Hz), these devices open the d…
▽ More
Optomechanical transduction is demonstrated for nanoscale torsional resonators evanescently coupled to optical microdisk whispering gallery mode resonators. The on-chip, integrated devices are measured using a fully fiber-based system, including a tapered and dimpled optical fiber probe. With a thermomechanically calibrated optomechanical noise floor down to 7 fm/sqrt(Hz), these devices open the door for a wide range of physical measurements involving extremely small torques, as little as 4x10^-20 N*m.
△ Less
Submitted 17 November, 2012; v1 submitted 5 October, 2012;
originally announced October 2012.
-
Microfluidic and Nanofluidic Cavities for Quantum Fluids Experiments
Authors:
A. Duh,
A. Suhel,
B. D. Hauer,
R. Saeedi,
P. H. Kim,
T. S. Biswas,
J. P. Davis
Abstract:
The union of quantum fluids research with nanoscience is rich with opportunities for new physics. The relevant length scales in quantum fluids, 3He in particular, are comparable to those possible using microfluidic and nanofluidic devices. In this article, we will briefly review how the physics of quantum fluids depends strongly on confinement on the microscale and nanoscale. Then we present devic…
▽ More
The union of quantum fluids research with nanoscience is rich with opportunities for new physics. The relevant length scales in quantum fluids, 3He in particular, are comparable to those possible using microfluidic and nanofluidic devices. In this article, we will briefly review how the physics of quantum fluids depends strongly on confinement on the microscale and nanoscale. Then we present devices fabricated specifically for quantum fluids research, with cavity sizes ranging from 30 nm to 11 microns deep, and the characterization of these devices for low temperature quantum fluids experiments.
△ Less
Submitted 5 March, 2012; v1 submitted 21 December, 2011;
originally announced December 2011.
