Showing 1–2 of 2 results for author: Khushaim, M
-
Laser-induced reversion of $δ^{'}$ precipitates in an Al-Li alloy: Study on temperature rise in pulsed laser atom probe
Authors:
Muna Khushaim,
Ryota Gemma,
Talaat Al-Kassab
Abstract:
The influence of tuning the laser energy during the analyses on the resulting microstructure in a specimen utilizing an ultra-fast laser assisted atom probe was demonstrated by a case study of a binary Al-Li alloy. The decomposition parameters, such as the size, number density, volume fraction and composition of $δ^{'}$ precipitates, were carefully monitored after each analysis. A simple model was…
▽ More
The influence of tuning the laser energy during the analyses on the resulting microstructure in a specimen utilizing an ultra-fast laser assisted atom probe was demonstrated by a case study of a binary Al-Li alloy. The decomposition parameters, such as the size, number density, volume fraction and composition of $δ^{'}$ precipitates, were carefully monitored after each analysis. A simple model was employed to estimate the corresponding specimen temperature for each value of the laser energy. The results indicated that the corresponding temperatures for the laser energy in the range of 10 to 80 pJ are located inside the miscibility gap of the binary Al-Li phase diagram and fall into the metastable equilibrium field. In addition, the corresponding temperature for a laser energy of 100 pJ was in fairly good agreement with reported range of $δ^{'}$ solvus temperature, suggesting a result of reversion upon heating due to laser pulsing.
△ Less
Submitted 29 September, 2015;
originally announced September 2015.
-
Characterization of precipitation in Al-Li alloy AA2195 by means of atom probe tomography and transmission electron microscopy
Authors:
Muna Khushaim,
Torben Boll,
Judith Seibert,
Fredinand Haider,
Talaat Al-Kassab
Abstract:
The microstructure of the commercial alloy AA2195 was investigated on the nano-scale after conducting a T8 tempering. This particular thermo-mechanical treatment of the specimen resulted in the formation of platelet-shaped $T_{1}$ ($Al_{2}CuLi$)/ $θ^{'}$($Al_{2}Cu$) within the Al-matrix. The electrochemically prepared samples were analyzed by scanning transmission electron microscopy and atom prob…
▽ More
The microstructure of the commercial alloy AA2195 was investigated on the nano-scale after conducting a T8 tempering. This particular thermo-mechanical treatment of the specimen resulted in the formation of platelet-shaped $T_{1}$ ($Al_{2}CuLi$)/ $θ^{'}$($Al_{2}Cu$) within the Al-matrix. The electrochemically prepared samples were analyzed by scanning transmission electron microscopy and atom probe tomography for chemical mapping. The $θ^{'}$ platelets, which are less than 2 nm thick, have the stoichiometric composition consistent with the expected ($Al_{2}Cu$) equilibrium composition. Additionally, the Li distribution inside the $θ^{'}$ platelets was found to equal the same value as in the matrix. The equally thin $T_{1}$ platelet deviates from the formula ($Al_{2}Li Cu$) in its stoichiometry and shows Mg enrichment inside the platelet without any indication of a higher segregation level at the precipitate/matrix interface. The deviation from the ($Al_{2}Li Cu$) stoichiometry cannot be simply interpreted as a consequence of artifacts when measuring the Cu and Li concentrations inside the $T_{1}$ platelet. The results show rather a strong hint for a true lower Li and Cu contents and hence, supporting reasonably the hypothesis that the real chemical composition for the thin $T_{1}$ platelet in the T8 tempering condition differs from the equilibrium composition of the thermodynamic stable bulk phase.
△ Less
Submitted 11 December, 2014;
originally announced December 2014.
