Showing 1–2 of 2 results for author: Khan, I S
-
Gallium Oxide Heterojunction Diodes for Improved High-Temperature Performance
Authors:
Shahadat H. Sohel,
Ramchandra Kotecha,
Imran S Khan,
Karen N. Heinselman,
Sreekant Narumanchi,
M Brooks Tellekamp,
Andriy Zakutayev
Abstract:
$β$-Ga${_2}$O${_3}…
▽ More
$β$-Ga${_2}$O${_3}$ based semiconductor devices are expected to have significantly improved high-power and high-temperature performance due to its ultra-wide bandgap of close to 5 eV. However, the high-temperature operation of these ultra-wide-bandgap devices is usually limited by the relatively low 1-2 eV built-in potential at the Schottky barrier with most high-work-function metals. Here, we report heterojunction p-NiO/n-$β$-Ga${_2}$O${_3}$ diodes fabrication and optimization for high-temperature device applications, demonstrating a current rectification ratio of more than 10${^6}$ at 410°C. The NiO heterojunction diode can achieve higher turn-on voltage and lower reverse leakage current compared to the Ni-based Schottky diode fabricated on the same single crystal $β$-Ga${_2}$O${_3}$ substrate, despite charge transport dominated by interfacial recombination. Electrical characterization and device modeling show that these advantages are due to a higher built-in potential and additional band offset. These results suggest that heterojunction p-n diodes based on $β$-Ga${_2}$O${_3}$ can significantly improve high-temperature electronic device and sensor performance.
△ Less
Submitted 31 March, 2022;
originally announced April 2022.
-
$Mg_xZn_{1-x}O$ contact to $CuGa_3Se_5$ absorber for photovoltaic and photoelectrochemical devices
Authors:
Imran S. Khan,
Christopher P. Muzzillo,
Craig L. Perkins,
Andrew G. Norman,
James Young,
Nicolas Gaillard,
Andriy Zakutayev
Abstract:
$CuGa_3Se_5$ is a promising candidate material with wide band gap for top cells in tandem photovoltaic (PV) and photoelectrochemical (PEC) devices. However, traditional CdS contact layers used with other chalcopyrite absorbers are not suitable for $CuGa_3Se_5$ due to the higher position of its conduction band minimum. $Mg_xZn_{1-x}O…
▽ More
$CuGa_3Se_5$ is a promising candidate material with wide band gap for top cells in tandem photovoltaic (PV) and photoelectrochemical (PEC) devices. However, traditional CdS contact layers used with other chalcopyrite absorbers are not suitable for $CuGa_3Se_5$ due to the higher position of its conduction band minimum. $Mg_xZn_{1-x}O$ is a transparent oxide with adjustable band gap and conduction band position as a function of magnesium composition, but its direct application is hindered by $CuGa_3Se_5$ surface oxidation. Here, $Mg_xZn_{1-x}O$ is investigated as a contact (n-type buffer or window) material to $CuGa_3Se_5$ absorbers pretreated in $Cd^{2+}$ solution, and an onset potential close to 1 V vs RHE in 10 mM hexaammineruthenium (III) chloride electrolyte is demonstrated. The $Cd^{2+}$ surface treatment changes the chemical composition and electronic structure of the $CuGa_3Se_5$ surface, as demonstrated by photoelectron spectroscopy measurements. The performance of $CuGa_3Se_5$ absorber with $Cd^{2+}$ treated surface in the solid-state test structure depends on the Zn/Mg ratio in the $Mg_xZn_{1-x}O$ layer. The measured open circuit voltage close to 1 V is promising for tandem PEC water splitting with $CuGa_3Se_5$/$Mg_xZn_{1-x}O$ top cells.
△ Less
Submitted 4 October, 2020;
originally announced October 2020.
