-
Probing trade-off between critical size and velocity in cold-spray: An atomistic simulation
Authors:
Mahyar Ghasemi,
Alireza Seifi,
Movaffaq Kateb,
Jon Tomas Gudmundsson,
Pascal Brault,
Pirooz Marashi
Abstract:
The detailed mechanism of bonding in the cold spray process has remained elusive for both experimental and theoretical parties. Adiabatic shear instability and hydrodynamic plasticity models have been so far the most popular explanations. Here, using molecular dynamics simulation, we investigate their validity at the nanoscale. The present study has potential application for the fabrication of ult…
▽ More
The detailed mechanism of bonding in the cold spray process has remained elusive for both experimental and theoretical parties. Adiabatic shear instability and hydrodynamic plasticity models have been so far the most popular explanations. Here, using molecular dynamics simulation, we investigate their validity at the nanoscale. The present study has potential application for the fabrication of ultra-thin layers for the electronics industry. For this aim, we considered Ti nanoparticles of different diameters and Si substrates of different orientations. It is shown that very high spray velocities are required for a jet to be observed at the nanoscale. We propose a method for thermostating the substrate that enables utilizing high spray velocities. For the first time, we demonstrate an oscillatory behavior in both the normal and radial stress components within the substrate that can propagate into the particle. We have shown that neither the adiabatic shear instability model nor the hydrodynamic plasticity model can be ignored at the nanoscale. Besides, the formation of a low-resistance titanium silicide proper for electronic application is illustrated.
△ Less
Submitted 2 November, 2024;
originally announced November 2024.
-
OH$^-$ ions can reduce the iodide migration in MAPI
Authors:
R. E. Brophy,
M. Kateb,
I. Ghitiu,
N. Filipoiu,
K. Torfason,
H. G. Svavarsson,
G. A. Nemnes,
I. Pintilie,
A. Manolescu
Abstract:
One of the main degradation mechanisms of methylammonium lead iodine (MAPI), which is an important material for perovskite based solar cells, is the migration of iodide ions. It is believed that this phenomenon is in fact dominated by the diffusion of iodide vacancies. In this paper, we suggest that the addition of a small amount of OH$^-$ ions can help suppress the migration of iodide and increas…
▽ More
One of the main degradation mechanisms of methylammonium lead iodine (MAPI), which is an important material for perovskite based solar cells, is the migration of iodide ions. It is believed that this phenomenon is in fact dominated by the diffusion of iodide vacancies. In this paper, we suggest that the addition of a small amount of OH$^-$ ions can help suppress the migration of iodide and increase the overall stability of the material. Through the use of molecular dynamics simulations, we show that the OH$^-$ ions can bind to the positively charged iodide vacancies and can block the access of the negative iodide ions into those vacancies.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Epitaxial growth and characterization of (001) [NiFe/M]$_{20}$ (M = Cu, CuPt and Pt) superlattices
Authors:
Movaffaq Kateb,
Jon Tomas Gudmundsson,
Snorri Ingvarsson
Abstract:
We present optimization of [(15 $\unicode{x212B}$) Ni$_{80}$Fe$_{20}$/(5 $\unicode{xC5}$) M]$_{20}$ single crystal multilayers on (001) MgO, with M being Cu, Cu$_{50}$Pt$_{50}$ and Pt. These superlattices were characterized by high-resolution X-ray reflectivity (XRR) and diffraction (XRD) as well as polar mapping of important crystal planes. It is shown that cube on cube epitaxial relationship can…
▽ More
We present optimization of [(15 $\unicode{x212B}$) Ni$_{80}$Fe$_{20}$/(5 $\unicode{xC5}$) M]$_{20}$ single crystal multilayers on (001) MgO, with M being Cu, Cu$_{50}$Pt$_{50}$ and Pt. These superlattices were characterized by high-resolution X-ray reflectivity (XRR) and diffraction (XRD) as well as polar mapping of important crystal planes. It is shown that cube on cube epitaxial relationship can be obtained when depositing at the substrate temperature of 100 $^\circ$C regardless of the lattice mismatch (5% and 14% for Cu and Pt, respectively). At lower substrate temperatures poly-crystalline multilayers were obtained while at higher substrate temperatures {111} planes appear at $\sim$10$^\circ$ off normal to the film plane. It is also shown that as the epitaxial strain increases, the easy magnetization axis rotates towards the direction that previously was assumed to be harder, i.e. from [110] to [100], and eventually further increase in the strain makes the magnetic hysteresis loops isotropic in the film plane. Higher epitaxial strain is also accompanied with increased coercivity values. Thus, the effect of epitaxial strain on the magnetocrystalline anisotropy is much larger than what was observed previously in similar, but polycrystalline samples with uniaxial anisotropy (Kateb et al. 2021).
△ Less
Submitted 28 February, 2023;
originally announced February 2023.
-
Effect of pressure on the dynamics of iodine defects in MAPI: An atomistic simulation
Authors:
Rachel Elizabeth Brophy,
Movaffaq Kateb,
Kristinn Torfason,
George Alexandru Nemnes,
Halldor Gudfinnur Svavarsson,
Ioana Pintilie,
Andrei Manolescu
Abstract:
The diffusion of iodine defects has been considered the most important degradation mechanism of methylammonium lead iodine (MAPI) in solar cells. The present study demonstrates the importance of the pressure inside this material on the dynamics of iodine defects, using molecular dynamics simulations. It is known that the diffusion coefficient of an iodine vacancy is an order of magnitude higher th…
▽ More
The diffusion of iodine defects has been considered the most important degradation mechanism of methylammonium lead iodine (MAPI) in solar cells. The present study demonstrates the importance of the pressure inside this material on the dynamics of iodine defects, using molecular dynamics simulations. It is known that the diffusion coefficient of an iodine vacancy is an order of magnitude higher than that of interstitial iodine. We show that this difference systematically increases with increased tensile strain and that both diffusion coefficients tend to zero when a compressive strain is applied. This result suggests that compression of the MAPI can be a good solution to reduce its degradation rate. %Also, different methods of determining the diffusion coefficient, including mean squared displacement (MSD) and velocity auto-correlation function, are discussed and applied to the case of ${\rm V}_{\rm I}$. Besides, the statistical aspect of deriving the diffusion coefficient from the mean squared displacement (MSD) is discussed in terms of the initial conditions (positions and velocities) of the atoms and the simulation time, considering different seeds of the pseudo-random number generator used in the simulations performed with the LAMMPS software.
△ Less
Submitted 11 February, 2023;
originally announced February 2023.
-
Distinct melting behaviour of partially oxidized Cu nanoparticles and nanowires
Authors:
Movaffaq Kateb,
Andrei Manolescu
Abstract:
While most of the experimental studies are dealing with partially oxidized metallic nanosolids, their behaviour is not well understood theoretically. To this end we utilized molecular dynamics simulation and charge-optimized many-body potential to probe melting of Cu nanoparticles and nanowires with and without a monolayer of Cu$_2$O as a shell. It is shown that partially oxidized nanosolids prese…
▽ More
While most of the experimental studies are dealing with partially oxidized metallic nanosolids, their behaviour is not well understood theoretically. To this end we utilized molecular dynamics simulation and charge-optimized many-body potential to probe melting of Cu nanoparticles and nanowires with and without a monolayer of Cu$_2$O as a shell. It is shown that partially oxidized nanosolids present a different melting behaviour than the widely accepted picture of melting, and especially different than surface melting. (i) For both types of nanosolids we observed inward diffusion of $\sim$40\% of atomic oxygen into the metallic core at room temperature. (ii) For the nanowire with oxide shell we observed a solid state phase transition in the Cu core that is not present for the case without the oxide. (iii) Prior to melting, the oxide shell shrinks, and this process continues after melting, to form a particulate oxide, for both types of nanosolids.
△ Less
Submitted 4 February, 2023;
originally announced February 2023.
-
Capacitive and inductive effects in perovskite solar cells: the different roles of ionic current and ionic charge accumulation
Authors:
Nicolae Filipoiu,
Amanda Teodora Preda,
Dragos Victor Anghel,
Roxana Patru,
Rachel Elizabeth Brophy,
Movaffaq Kateb,
Cristina Besleaga,
Andrei Gabriel Tomulescu,
Ioana Pintilie,
Andrei Manolescu,
George Alexandru Nemnes
Abstract:
Dynamic hysteresis effects have been long known to occur in the J-V characteristics of perovskite solar cells (PSCs), with the ionic migration being identified as the primary factor. The hysteretic effects impacted early studies by the uncertainty in the evaluation of the power conversion efficiency, while currently, potential links to degradation mechanisms are in the focus. Therefore, understand…
▽ More
Dynamic hysteresis effects have been long known to occur in the J-V characteristics of perovskite solar cells (PSCs), with the ionic migration being identified as the primary factor. The hysteretic effects impacted early studies by the uncertainty in the evaluation of the power conversion efficiency, while currently, potential links to degradation mechanisms are in the focus. Therefore, understanding ion migration is a central goal, typically addressed by performing a combined large- and small signal analysis. The reported large capacitive and inductive effects created controversies with respect to the underlying mechanisms, yielding essentially two classes of models, one based on large accumulation capacitances and the other based on ionic modulation of the collected current. We introduce here an equivalent circuit model and interpret these phenomena in terms of recombination current modulation, identifying the distinct contributions from ion current and ionic charge accumulations. These contributions to the recombination current are associated with capacitive and inductive effects, respectively, and we corroborate the numerical simulations with electrochemical impedance spectroscopy (EIS) measurements. These show the role of the recombination currents of photogenerated carriers in producing both capacitive and inductive effects as the illumination is varied. Moreover, we provide a bridging point between the two classes of models and suggest a framework of investigation of defect states based on the observed inductive behavior, which would further aid the mitigation of the degradation effects.
△ Less
Submitted 30 November, 2022; v1 submitted 22 August, 2022;
originally announced August 2022.
-
Effects of transverse geometry on the thermal conductivity of Si and Ge nanowires
Authors:
Hadi Rezaie Heris,
Movaffaq Kateb,
Sigurdur I. Erlingsson,
Andrei Manolescu
Abstract:
We explore the effects of geometry on the thermal conductivity (kappa) of silicon and germanium nanowires, with lengths between 10-120 nm and diameters up to 5-6 nm. To this end we perform molecular dynamics simulations with the LAMMPS software, using Tersoff interatomic potentials. We consider nanowires with polygonal cross section and we discuss the effect of the transverse geometry on the therm…
▽ More
We explore the effects of geometry on the thermal conductivity (kappa) of silicon and germanium nanowires, with lengths between 10-120 nm and diameters up to 5-6 nm. To this end we perform molecular dynamics simulations with the LAMMPS software, using Tersoff interatomic potentials. We consider nanowires with polygonal cross section and we discuss the effect of the transverse geometry on the thermal conductivity. We also consider tubular (hollow) nanowires and core/shell combinations of Si/Ge and Ge/Si, and we compare the heat transport of the core/shell structure with that of the separated core and shell components.
△ Less
Submitted 29 March, 2022;
originally announced March 2022.
-
On the role of ion potential energy in low energy HiPIMS deposition: An atomistic simulation
Authors:
Movaffaq Kateb,
Jon Tomas Gudmundsson,
Pascal Brault,
Andrei Manolescu,
Snorri Ingvarsson
Abstract:
We study the effect of the so-called ion potential or non-kinetic energies of bombarding ions during ionized physical vapor deposition of Cu using molecular dynamics simulations. In particular we focus on low energy HiPIMS deposition, in which the potential energy of ions can be comparable to their kinetic energy. The ion potential, as a short-ranged repulsive force between the ions of the film-fo…
▽ More
We study the effect of the so-called ion potential or non-kinetic energies of bombarding ions during ionized physical vapor deposition of Cu using molecular dynamics simulations. In particular we focus on low energy HiPIMS deposition, in which the potential energy of ions can be comparable to their kinetic energy. The ion potential, as a short-ranged repulsive force between the ions of the film-forming material and the surface atoms (substrate and later deposited film), is defined by the Ziegler-Biersack-Littmark potential. Analyzing the final structure indicates that, including the ion potential leads to a slightly lower interface mixing and fewer point defects (such as vacancies and interstitials), but resputtering and twinning have increased slightly. However, by including the ion potential the collision pattern changes. We also observed temporary formation of a ripple/pore with 5~nm height when the ion potential is included. The latter effect can explain the pores in HiPIMS deposited Cu thin films observed experimentally by atomic force microscopy.
△ Less
Submitted 15 September, 2021; v1 submitted 14 January, 2021;
originally announced January 2021.
-
Tailoring interface mixing and magnetic properties in (111) Permalloy/Pt multilayers
Authors:
Movaffaq Kateb,
Jon Tomas Gudmundsson,
Snorri Ingvarsson
Abstract:
We present deposition and characterization of multilayers consisting of 20 repetitions of 15 $Å$ thick permalloy Ni$_{80}$Fe$_{20}$ at. \% (Py) and 5 $Å$ Pt. The samples were prepared by two different sputter deposition methods, namely dc magnetron sputtering (dcMS) and high power impulse magnetron sputtering (HiPIMS), that represent low and moderate ionized flux fraction of the film forming mater…
▽ More
We present deposition and characterization of multilayers consisting of 20 repetitions of 15 $Å$ thick permalloy Ni$_{80}$Fe$_{20}$ at. \% (Py) and 5 $Å$ Pt. The samples were prepared by two different sputter deposition methods, namely dc magnetron sputtering (dcMS) and high power impulse magnetron sputtering (HiPIMS), that represent low and moderate ionized flux fraction of the film forming material, respectively, for deposition of the Py layers. The effect of substrate roughness, working gas pressure and sputter power on the in-plane uniaxial magnetic anisotropy of the films are studied. The multilayers were characterized by X-ray reflectivity and diffraction, and by magneto-optical Kerr effect (MOKE). It is shown that HiPIMS deposition produces multilayers with unique surface roughness regardless of the substrate surface roughness. Multilayers prepared by both dcMS and HiPIMS deposition present a strong (111) texture normal to the film plane. The results show that utilizing HiPIMS for deposition of the Py layer leads to a minimum interface mixing between individual layers compared to dcMS deposition performed at sputter power. This is associated with the smooth surface of Py deposited by HiPIMS. However, this sharp interface results in higher coercivity and an opening in the hard axis hysteresis loops while multilayers with intermixing present well defined in-plane uniaxial anisotropy i.e. a linear hard axis. Comparison with Py/Cu and Py/CuPt multilayers, prepared under identical conditions using HiPIMS, suggests that poor in-plane uniaxial anisotropy is obtained in the Py/Pt case, caused by the inverse magnetostriction arising from the large lattice mismatch between Py and Pt. The Py/Pt multilayers that exhibit interface mixing have a more relaxed interface and thus presents negligible inverse magnetostriction and have better defined anisotropy.
△ Less
Submitted 18 July, 2021; v1 submitted 12 October, 2020;
originally announced October 2020.
-
Stencil growth of metallic nanorod: An atomistic simulation
Authors:
Movaffaq Kateb
Abstract:
We demonstrate the stencil growth of nanoscale patterns using molecular dynamic simulation. A comparison has been made to a film grown by identical conditions without a stencil. It is shown that in the case of nanoscale proximity between mask and substrate, patterns of the same dimension as the mask can be obtained. The results also indicate that the obtained nanorod presents a higher surface area…
▽ More
We demonstrate the stencil growth of nanoscale patterns using molecular dynamic simulation. A comparison has been made to a film grown by identical conditions without a stencil. It is shown that in the case of nanoscale proximity between mask and substrate, patterns of the same dimension as the mask can be obtained. The results also indicate that the obtained nanorod presents a higher surface area than the corresponding thin film. It is demonstrated that nanorod surface roughness decreases by merging adjacent surface irregularity during the deposition.
△ Less
Submitted 4 December, 2020; v1 submitted 10 October, 2020;
originally announced October 2020.
-
Correlation of uniaxial magnetic anisotropy axes and principal resistivities in polycrystalline ferromagnetic films
Authors:
Movaffaq Kateb,
Snorri Ingvarsson
Abstract:
In the present study, we demonstrate the measurement of resistivity tensor ($ρ$) along the magnetic axes of a polycrystalline film of ferromagnetic permalloy (Py). To this end, conventional Hall-bar and a more recent extended van der Pauw methods were utilized for determining 2D $ρ$ in the film plane. The samples were prepared by normal incidence sputter deposition within an in-situ magnetic field…
▽ More
In the present study, we demonstrate the measurement of resistivity tensor ($ρ$) along the magnetic axes of a polycrystalline film of ferromagnetic permalloy (Py). To this end, conventional Hall-bar and a more recent extended van der Pauw methods were utilized for determining 2D $ρ$ in the film plane. The samples were prepared by normal incidence sputter deposition within an in-situ magnetic field to induce in-plane uniaxial magnetic anisotropy in the film. Since $ρ$ might be affected by the internal magnetization of the film, we performed measurements by rotation of a saturating magnetic field in the film plane. Both methods indicate that the average resistivity is lower along the easy axis of the film compared to the hard axis. Since X-ray diffraction results indicated no dominating texture in the film, we concluded that there is a correlation between uniaxial magnetic axes and principal resistivity axes. This is an important finding that allows determining the direction of magnetic anisotropy axes without magnetometry. The results also verify atomic or pair ordering to be the origin of uniaxial magnetic anisotropy in the Py since resistivity is sensitive to the level of order in solids. The extended van der Pauw utilized here can be easily performed on the as-received samples which is of practical interest.
△ Less
Submitted 28 March, 2021; v1 submitted 7 October, 2020;
originally announced October 2020.
-
Thermoelectric properties of tubular nanowires in the presence of a transverse magnetic field
Authors:
Hadi Rezaie Heris,
Movaffaq Kateb,
Sigurdur I. Erlingsson,
Andrei Manolescu
Abstract:
We calculate the charge and heat current associate with electrons, generated by a temperature gradient and chemical potential difference between two ends of a tubular nanowire of 30 nm radius in the presence of an external magnetic field perpendicular to its axis. We consider a nanowire based on a semiconductor material, and use the Landauer-Bttiker approach to calculate the transport quantities.…
▽ More
We calculate the charge and heat current associate with electrons, generated by a temperature gradient and chemical potential difference between two ends of a tubular nanowire of 30 nm radius in the presence of an external magnetic field perpendicular to its axis. We consider a nanowire based on a semiconductor material, and use the Landauer-Bttiker approach to calculate the transport quantities. We obtain the variation of the Seebeck coefficient ($S$), thermal conductivity kappa, and the figure of merit ($ZT$), with respect to the temperature up to 20\,K, and with the magnetic field up to 3 T. In particular we show that the Seebeck coefficient can change sign in this domain of parameters. In addition $κ$ and $ZT$ have oscillations when the magnetic field increases. These oscillations are determined by the energy spectrum of the electrons.
△ Less
Submitted 23 June, 2020;
originally announced June 2020.
-
Effect of substrate bias on microstructure of epitaxial film grown by HiPIMS: An atomistic simulation
Authors:
Movaffaq Kateb,
Jon Tomas Gudmundsson,
Snorri Ingvarsson
Abstract:
We explore combination of high power impulse magnetron sputtering (HiPIMS) and substrate bias for the epitaxial growth of Cu film on Cu (111) substrate by molecular dynamics simulation. A fully ionized deposition flux was used to represent the high ionization fraction in the HiPIMS process. To mimic different substrate bias, we assumed the deposition flux with a flat energy distribution in the low…
▽ More
We explore combination of high power impulse magnetron sputtering (HiPIMS) and substrate bias for the epitaxial growth of Cu film on Cu (111) substrate by molecular dynamics simulation. A fully ionized deposition flux was used to represent the high ionization fraction in the HiPIMS process. To mimic different substrate bias, we assumed the deposition flux with a flat energy distribution in the low, moderate and high energy ranges. We also compared the results of fully ionized flux with results assuming a completely neutral flux, in analogy with thermal evaporation. It is confirmed that in the low energy regime, HiPIMS presents a slightly smoother surface and more interface mixing compared to that of thermal evaporation. In the moderate energy HiPIMS, however, an atomically smooth surface was obtained with a slight increase in the interface mixing compared to low energy HiPIMS. In the high energy regime, HiPIMS presents severe interface mixing with a smooth surface but limited growth due to resputtering from the surface. The results also indicate that fewer crystal defects appear in the film for moderate energy HiPIMS. We attribute this behavior to the repetition frequency of collision events. In particular high energy HiPIMS suffers from high repetition of collision events which does not allow reconstruction of the film. While in the low energy HiPIMS there are not enough events to overcome island growth. At moderate energy, collision events repeat in a manner that provides enough time for reconstruction which results in a smooth surface, fewer defects and limited intermixing.
△ Less
Submitted 4 June, 2020;
originally announced June 2020.
-
Size and shape-dependent melting mechanism of Pd nanoparticles
Authors:
Movaffaq Kateb,
Maryam Azadeh,
Pirooz Marashi,
Snorri Ingvarsson
Abstract:
Molecular dynamics simulation is employed to understand the thermodynamic behavior of cuboctahedron (cub) and icosahedron (ico) nanoparticles with 2-20 number of full shells. The original embedded atom method (EAM) was compared to the more recent highly optimized version as inter-atomic potential. The thermal stability of clusters were probed using potential energy and specific heat capacity as we…
▽ More
Molecular dynamics simulation is employed to understand the thermodynamic behavior of cuboctahedron (cub) and icosahedron (ico) nanoparticles with 2-20 number of full shells. The original embedded atom method (EAM) was compared to the more recent highly optimized version as inter-atomic potential. The thermal stability of clusters were probed using potential energy and specific heat capacity as well as structure analysis by radial distribution function, G(r), and common neighbor analysis (CNA), simultaneously, to make a comprehensive picture of the solid state and melting transitions. The result shows ico is the only stable shape of small clusters (Pd55-Pd309 using original EAM and Pd55 using optimized version) those are melting uniformly due to their small diameter. An exception is cub Pd309 modeled via optimized EAM that transforms to ico at elevated temperatures. A similar cub to ico transition was predicted by original EAM for Pd923-Pd2075 clusters while for the larger clusters both cub and ico are stable up to the melting point. As detected by G(r) and CNA, moderate and large cub clusters were showing surface melting by nucleation of the liquid phase at (100) planes and growth of liquid phase at the surface before inward growth. While diagonal (one corner to another) melting was dominating over ico clusters owing to their partitioned structure which retarded the growth of the liquid phase. The large ico cluster, using optimized EAM, presented a combination of surface and diagonal melting due to the simultaneous diagonal melting started from different corners. Finally, the melting temperature as well as latent heat of fusion were calculated and compared with available models and previous studies which showed, unlike the present result, the models failed to predict size-dependent motif crossover.
△ Less
Submitted 20 February, 2020;
originally announced February 2020.
-
Determining phase transition using potential energy distribution and surface energy of Pd nanoparticles
Authors:
Maryam Azadeh,
Movaffaq Kateb,
Pirooz Marashi
Abstract:
Molecular dynamics simulation is employed to understand the thermodynamic behavior of cuboctahedron (cub) and icosahedron (ico) nanoparticles with 2-20 number of shells (55-28741 atoms). The embedded atom method was used to describe the interatomic potential. Conventional melting criteria such as potential energy and specific heat capacity (C_p) caloric curves as well as structure analysis by radi…
▽ More
Molecular dynamics simulation is employed to understand the thermodynamic behavior of cuboctahedron (cub) and icosahedron (ico) nanoparticles with 2-20 number of shells (55-28741 atoms). The embedded atom method was used to describe the interatomic potential. Conventional melting criteria such as potential energy and specific heat capacity (C_p) caloric curves as well as structure analysis by radial distribution function (G(r)) and common neighbor analysis (CNA) were utilized simultaneously to provide a comprehensive picture of the melting process. It is shown that the potential energy distribution and surface energy (gamma_p) proposed here are holding several advantages over previous criteria. In particular, potential energy distribution can distinguish between interior and surface atoms and even corner, edge and plane atoms at the surface. While G(r) and CNA are not surface sensitive methods and cannot distinguish between surface melting and an allotropic transition. It is also shown that allotropic change appears more clearly in C_p and gamma_p rather than potential energy. However, determining accurate C_p requires enough sampling to be averaged. Finally, a few issues in the current methods for determining gamma_p were discussed and a simple method based on available models was proposed which, independent of estimation of the surface area, predicts the correct temperature and size-dependent trend in agreement with Guggenheim-Katayama and Tolman's models, respectively.
△ Less
Submitted 11 August, 2019;
originally announced August 2019.
-
The role of ionization fraction on the surface roughness, density and interface mixing of the films deposited by thermal evaporation, dc magnetron sputtering and HiPIMS: An atomistic simulation
Authors:
Movaffaq Kateb,
Hamidreza Hajihoseini,
Jon Tomas Gudmundsson,
Snorri Ingvarsson
Abstract:
We explore the effect of ionization fraction on the epitaxial growth of Cu film on Cu (111) substrate at room temperature. We compare thermal evaporation, dc magnetron sputtering (dcMS) and high power impulse magnetron sputtering (HiPIMS). Three deposition conditions i.e. fully neutral, 50% ionized and 100% ionized flux were considered as thermal evaporation, dcMS and HiPIMS, respectively, for ~20…
▽ More
We explore the effect of ionization fraction on the epitaxial growth of Cu film on Cu (111) substrate at room temperature. We compare thermal evaporation, dc magnetron sputtering (dcMS) and high power impulse magnetron sputtering (HiPIMS). Three deposition conditions i.e. fully neutral, 50% ionized and 100% ionized flux were considered as thermal evaporation, dcMS and HiPIMS, respectively, for ~20000 adatoms. It is shown that higher ionization fraction of the deposition flux leads to smoother surfaces by two major mechanisms i.e. decreasing clustering in the vapor phase and bi-collision of high energy ions at the film surface. The bi-collision event consists of local amorphization which fills the gaps between islands followed by crystallization due to secondary collisions. We found bi-collision events to be very important to prevent island growth to become dominant and increase the surface roughness. Regardless of the deposition method, epitaxial Cu thin films suffer from stacking fault areas (twin boundaries) in agreement with recent experimental results. In addition, HiPIMS deposition presents considerable interface mixing while it is negligible in thermal evaporation and dcMS deposition, those present less adhesion accordingly.
△ Less
Submitted 11 April, 2019;
originally announced April 2019.
-
Effect of atomic ordering on the magnetic anisotropy of single crystal Ni80Fe20
Authors:
Movaffaq Kateb,
Jon Tomas Gudmundsson,
Snorri Ingvarsson
Abstract:
We investigate the effect of atomic ordering on the magnetic anisotropy of Ni80Fe20 at.% (Py). To this end, Py films were grown epitaxially on MgO (001) using dc magnetron sputtering (dcMS) and high power impulse magnetron sputtering (HiPIMS). Aside from twin boundaries observed in the latter case, both methods present high quality single crystals with cube-on-cube epitaxial relationship as verifi…
▽ More
We investigate the effect of atomic ordering on the magnetic anisotropy of Ni80Fe20 at.% (Py). To this end, Py films were grown epitaxially on MgO (001) using dc magnetron sputtering (dcMS) and high power impulse magnetron sputtering (HiPIMS). Aside from twin boundaries observed in the latter case, both methods present high quality single crystals with cube-on-cube epitaxial relationship as verified by the polar mapping of important crystal planes. However, X-ray diffraction results indicate higher order for the dcMS deposited film towards L12 Ni3Fe superlattice. This difference can be understood by the very high deposition rate of HiPIMS during each pulse which suppresses adatom mobility and ordering. We show that the dcMS deposited film presents biaxial anisotropy while HiPIMS deposition gives well defined uniaxial anisotropy. Thus, higher order achieved in the dcMS deposition behaves as predicted by magnetocrystalline anisotropy i.e. easy axis along the [111] direction that forced in the plane along the [110] direction due to shape anisotropy. The uniaxial behaviour in HiPIMS deposited film then can be explained by pair ordering or more recent localized composition non-uniformity theories. Further, we studied magnetoresistance of the films along the [100] directions using an extended van der Pauw method. We find that the electrical resistivities of the dcMS deposited film are lower than in their HiPIMS counterparts verifying the higher order in the dcMS case.
△ Less
Submitted 28 February, 2019;
originally announced March 2019.
-
Application of an extended van der Pauw method to anisotropic magnetoresistance measurements of ferromagnetic films
Authors:
Movaffaq Kateb,
Egill Jacobsen,
Snorri Ingvarsson
Abstract:
We demonstrate anisotropic resistivity measurements using the extended van der Pauw (vdP) method in ferromagnetic Ni80Fe20 (Py) films. We apply it to measure anisotropic magnetoresistance (AMR) and compare the results of the vdP method with the more conventional Hall-bar method along the hard and easy axis of the film and show that the vdP method gives more reliable AMR result. For instance, the A…
▽ More
We demonstrate anisotropic resistivity measurements using the extended van der Pauw (vdP) method in ferromagnetic Ni80Fe20 (Py) films. We apply it to measure anisotropic magnetoresistance (AMR) and compare the results of the vdP method with the more conventional Hall-bar method along the hard and easy axis of the film and show that the vdP method gives more reliable AMR result. For instance, the AMR result along the hard and easy axis of the film are in close agreement. Further, we applied the vdP method to study AMR in a series of Py films with thicknesses ranging between 10-250 nm. The films were grown by sputtering deposition at an angle with respect to the substrate normal and with an in-situ magnetic field, both conditions assisting in the definition of in-plane uniaxial anisotropy. The microstructure of Py films was characterized using X-ray reflectivity, diffraction and polar mapping of (111) planes. We detected no off-normal texture and negligible surface roughness, which indicates that self-shadowing is not dominating in our growth. Yet the films have well defined uniaxial anisotropy. Abrupt changes in the average resistivity vs. film thickness were observed, which cannot be explained by the models accounting for the thickness and grain size but strongly correlate with the changes in (111) texture in the films. We compared our results with the literature and show that independent of growth method, substrate and deposition temperature, the AMR value presents a saturation behavior with thickness at about 100 nm.
△ Less
Submitted 29 November, 2018;
originally announced November 2018.
-
Comparison of magnetic and structural properties of permalloy Ni80Fe20 grown by dc and high power impulse magnetron sputtering
Authors:
Movaffaq Kateb,
Hamidreza Hajihoseini,
Jon Tomas Gudmundsson,
Snorri Ingvarsson
Abstract:
We study the microstructure and magnetic properties of Ni80Fe20 thin films grown by high power impulse magnetron sputtering (HiPIMS), and compare with films grown by dc magnetron sputtering (dcMS). The films were grown under a tilt angle of 35° to identical thickness of 37 nm using both techniques, at different pressure (0.13-0.73 Pa) and substrate temperature (room temperature and 100 °C). All of…
▽ More
We study the microstructure and magnetic properties of Ni80Fe20 thin films grown by high power impulse magnetron sputtering (HiPIMS), and compare with films grown by dc magnetron sputtering (dcMS). The films were grown under a tilt angle of 35° to identical thickness of 37 nm using both techniques, at different pressure (0.13-0.73 Pa) and substrate temperature (room temperature and 100 °C). All of our films display effective in-plane uniaxial anisotropy with square easy axis and linear hard axis magnetization traces. X-ray diffraction reveals that there is very little change in grain size within the pressure and temperature ranges explored. However, variations in film density, obtained by X-ray reflectivity measurements, with pressure have a significant effect on magnetic properties such as anisotropy field (Hk) and coercivity (Hc). Depositions where adatom energy is high produce dense films, while low adatom energy results in void-rich films with higher Hk and Hc. The latter applies to our dcMS deposited films at room temperature and high pressure. However, the HiPIMS deposition method gives higher adatom energy than the dcMS and results in dense films with low Hk and Hc. The surface roughness is found to increase with increased pressure, in all cases, however it showed negligible contribution to the increase in Hk and Hc.
△ Less
Submitted 7 March, 2019; v1 submitted 31 May, 2018;
originally announced May 2018.
