-
A generalized calculation of the rate independent single crystal yield surface
Authors:
Matthew Kasemer,
Paul R. Dawson
Abstract:
In this paper, we discuss a method to calculate the topology of the rate independent single crystal yield surface for materials with arbitrary slip systems and arbitrary slip strengths. We describe the general problem, as motivated by Schmid's law, and detail the calculation of hyperplanes in deviatoric stress space, $\mathbb{D}^5$, which describe the criteria for slip on individual slip systems.…
▽ More
In this paper, we discuss a method to calculate the topology of the rate independent single crystal yield surface for materials with arbitrary slip systems and arbitrary slip strengths. We describe the general problem, as motivated by Schmid's law, and detail the calculation of hyperplanes in deviatoric stress space, $\mathbb{D}^5$, which describe the criteria for slip on individual slip systems. We focus on finding the intersection of five linearly independent hyperplanes which represent stresses necessary to satisfy the criteria for general plastic deformation. Finally, we describe a method for calculating the inner convex hull of these intersection points, which describe the vertices of the five dimensional polytope that represents the single crystal yield surface. Our method applies to arbitrary crystal structure, allowing for an arbitrary number and type of slip systems and families, considers plastic anisotropy via inter- and intra-family strength anisotropy, and further considers strength anisotropy between slip in the positive and negative direction. We discuss the calculation and possible applications, and share a computational implementation of the calculation of the single crystal yield surface.
△ Less
Submitted 2 March, 2025; v1 submitted 26 February, 2025;
originally announced February 2025.
-
Orientation reconstruction of transformation $α$ titanium alloys via polarized light microscopy: methodology and assessment
Authors:
Amit Singh,
Mark Obstalecki,
Darren C. Pagan,
Michael Glavicic,
Matthew Kasemer
Abstract:
Emerging microstructural characterization methods have received increased attention owing to their promise of relatively inexpensive and rapid measurement of polycrystalline surface morphology and crystallographic orientations. Among these nascent methods, polarized light microscopy (PLM) is attractive for characterizing alloys comprised of hexagonal crystals, but is hindered by its inability to m…
▽ More
Emerging microstructural characterization methods have received increased attention owing to their promise of relatively inexpensive and rapid measurement of polycrystalline surface morphology and crystallographic orientations. Among these nascent methods, polarized light microscopy (PLM) is attractive for characterizing alloys comprised of hexagonal crystals, but is hindered by its inability to measure complete crystal orientations. In this study, we explore the potential to reconstruct quasi-deterministic orientations for titanium microstructures characterized via PLM by considering the Burgers orientation relationship between the room temperature $α$ (HCP) phase fibers measured via PLM, and the $β$ (BCC) phase orientations of the parent grains present above the transus temperature. We describe this method -- which is capable of narrowing down the orientations to one of four possibilities -- and demonstrate its abilities on idealized computational samples in which the parent $β$ microstructure is fully, unambiguously known. We further utilize this method to inform the instantiation of samples for crystal plasticity simulations, and demonstrate the significant improvement in deformation field predictions when utilizing this reconstruction method compared to using results from traditional PLM.
△ Less
Submitted 20 January, 2025; v1 submitted 28 June, 2024;
originally announced June 2024.
-
Establishing the relationship between generalized crystallographic texture and macroscopic yield surfaces using partial input convex neural networks
Authors:
Lloyd van Wees,
Karthik Shankar,
Jan N. Fuhg,
Nikolaos Bouklas,
Paul Shade,
Mark Obstalecki,
Matthew Kasemer
Abstract:
In this study, we present a methodology to predict the macroscopic yield surface of metals and metallic alloys with general crystallographic textures. In previous work, we have established the use of partially input convex neural networks (pICNN) as macroscopic yield functions of crystal plasticity simulations. However, this work was performed with an over-abundance of data, and on limited crystal…
▽ More
In this study, we present a methodology to predict the macroscopic yield surface of metals and metallic alloys with general crystallographic textures. In previous work, we have established the use of partially input convex neural networks (pICNN) as macroscopic yield functions of crystal plasticity simulations. However, this work was performed with an over-abundance of data, and on limited crystallographic textures. Here, we extend this study to approach more realistic material states (i.e., complex crystallographic textures), and consider data-availability as a major driver for our approach. We present our modified framework capable of handling generalized material states and demonstrate its effectiveness on samples with multi-modal textures deformed under plane stress conditions. We further describe an adaptive algorithm for the generation of training data as informed by the shape of yield surfaces to reduce the time for both the generation of training data as well as pICNN training. Finally, we will discuss errors in both training and test datasets, limitations, and future extensibility.
△ Less
Submitted 27 June, 2024; v1 submitted 4 April, 2024;
originally announced April 2024.
-
The influence of substantial intragranular orientation gradients on the micromechanical response of heavily-worked material
Authors:
Karthik Shankar,
Meddelin Setiawan,
Katherine S. Shanks,
Matthew E. Krug,
Matthew P. Kasemer,
Darren C. Pagan
Abstract:
In this study, we employ high-energy X-ray characterization to examine the role of relatively large amounts of intragranular lattice misorientation -- present after many thermomechanical processes -- on the micromechanical response of Al-7085 with a modified T7452 temper. We utilize near-field high energy X-ray diffraction microscopy (HEDM) to measure three-dimensional (3D) spatial orientation fie…
▽ More
In this study, we employ high-energy X-ray characterization to examine the role of relatively large amounts of intragranular lattice misorientation -- present after many thermomechanical processes -- on the micromechanical response of Al-7085 with a modified T7452 temper. We utilize near-field high energy X-ray diffraction microscopy (HEDM) to measure three-dimensional (3D) spatial orientation fields, facilitated by a novel method that utilizes grain orientation envelopes measured using far-field HEDM to enable reconstruction of grains with intragranular orientation spreads greater than 20°. We then assess the consequences of consideration of intragranular orientation fields on the predicted deformation response of the sample through 3D micromechanical simulations of the forged Al-7085. We construct two virtual polycrystalline specimens for use in simulations: the first a faithful representation of the HEDM reconstruction, the second a microstructure with no intragranular misorientation (i.e., grain-averaged orientations). We find significant differences in the predicted deformation mechanism activation, distribution of stress, and distribution of plastic strain between simulations containing intragranular misorientation and those with grain-averaged orientations, indicating the necessity for consideration of intragranular orientation fields for accurate predictions. Further, the influence of elastic anisotropy is discussed, along with the effects of intragranular misorientation on fatigue life through the calculation and analysis of fatigue indicator parameters.
△ Less
Submitted 30 May, 2024; v1 submitted 4 April, 2024;
originally announced April 2024.
-
Graph Neural Network Modeling of Grain-scale Anisotropic Elastic Behavior using Simulated and Measured Microscale Data
Authors:
Darren C. Pagan,
Calvin R. Pash,
Austin R. Benson,
Matthew P. Kasemer
Abstract:
Here we assess the applicability of graph neural networks (GNNs) for predicting the grain-scale elastic response of polycrystalline metallic alloys. Using GNN surrogate models, grain-averaged stresses during uniaxial elastic tension in Low Solvus High Refractory (LSHR) Ni Superalloy and Ti 7wt%Al (Ti-7Al), as example face centered cubic and hexagonal closed packed alloys, are predicted. A transfer…
▽ More
Here we assess the applicability of graph neural networks (GNNs) for predicting the grain-scale elastic response of polycrystalline metallic alloys. Using GNN surrogate models, grain-averaged stresses during uniaxial elastic tension in Low Solvus High Refractory (LSHR) Ni Superalloy and Ti 7wt%Al (Ti-7Al), as example face centered cubic and hexagonal closed packed alloys, are predicted. A transfer learning approach is taken in which GNN surrogate models are trained using crystal elasticity finite element method (CEFEM) simulations and then the trained surrogate models are used to predict the mechanical response of microstructures measured using high-energy X-ray diffraction microscopy (HEDM). The performance of using various microstructural and micromechanical descriptors for input nodal features to the GNNs is explored through comparisons to traditional mean-field theory predictions, reserved full-field CEFEM data, and measured far-field HEDM data. The effects of elastic anisotropy on GNN model performance and outlooks for extension of the framework are discussed.
△ Less
Submitted 30 August, 2022; v1 submitted 12 May, 2022;
originally announced May 2022.
-
Machine-learning convex and texture-dependent macroscopic yield from crystal plasticity simulations
Authors:
Jan N. Fuhg,
Lloyd van Wees,
Mark Obstalecki,
Paul Shade,
Nikolaos Bouklas,
Matthew Kasemer
Abstract:
The influence of the microstructure of a polycrystalline material on its macroscopic deformation response is still one of the major problems in materials engineering. For materials characterized by elastic-plastic deformation responses, predictive computational models to characterize crystal-plasticity (CP) have been developed. However, due to their large demand of computational resources, CP simu…
▽ More
The influence of the microstructure of a polycrystalline material on its macroscopic deformation response is still one of the major problems in materials engineering. For materials characterized by elastic-plastic deformation responses, predictive computational models to characterize crystal-plasticity (CP) have been developed. However, due to their large demand of computational resources, CP simulations cannot be straightforwardly implemented in hierarchical computational models such as FE$^{2}$. This bottleneck intensifies the need for the development of macroscopic simulation tools that can be directly informed by microstructural quantities. Using a 3D Finite-Element solver for CP, we generate a macroscopic yield function database based on general loading conditions and crystallographic texture. We furthermore assume an independence of the yield function to hydrostatic pressure of the yield function. Leveraging the advancement in statistical modeling we describe and apply a machine learning framework for predicting macroscopic yield as a function of crystallographic texture. The convexity of the data-driven yield function is guaranteed by using partially input convex neural networks as the predictive tool. Furthermore, in order to allow for the predicted yield function to be directly incorporated in time-integration schemes, as needed for the Finite Element method, the yield surfaces are interpreted as the boundaries of signed distance function level sets.
△ Less
Submitted 28 January, 2022;
originally announced February 2022.
-
On Open and Strong-Scaling Tools for Atom Probe Crystallography: High-Throughput Methods for Indexing Crystal Structure and Orientation
Authors:
Markus Kühbach,
Matthew Kasemer,
Baptiste Gault,
Andrew Breen
Abstract:
Volumetric crystal structure indexing and orientation mapping are key data processing steps for virtually any quantitative study of spatial correlations between the local chemistry and the microstructure of a material. For electron and X-ray diffraction methods it is possible to develop indexing tools which compare measured and analytically computed patterns to decode the structure and relative or…
▽ More
Volumetric crystal structure indexing and orientation mapping are key data processing steps for virtually any quantitative study of spatial correlations between the local chemistry and the microstructure of a material. For electron and X-ray diffraction methods it is possible to develop indexing tools which compare measured and analytically computed patterns to decode the structure and relative orientation within local regions of interest. Consequently, a number of numerically efficient and automated software tools exist to solve the above characterisation tasks.
For atom probe tomography (APT) experiments, however, the strategy of making comparisons between measured and analytically computed patterns is less robust because many APT datasets may contain substantial noise. Given that general enough predictive models for such noise remain elusive, crystallography tools for APT face several limitations: Their robustness to noise, and therefore, their capability to identify and distinguish different crystal structures and orientation is limited. In addition, the tools are sequential and demand substantial manual interaction. In combination, this makes robust uncertainty quantifying with automated high-throughput studies of the latent crystallographic information a difficult task with APT data.
To improve the situation, we review the existent methods and discuss how they link to those in the diffraction communities. With this we modify some of the APT methods to yield more robust descriptors of the atomic arrangement. We report how this enables the development of an open-source software tool for strong-scaling and automated identifying of crystal structure and mapping crystal orientation in nanocrystalline APT datasets with multiple phases.
△ Less
Submitted 1 September, 2020;
originally announced September 2020.
