Showing 1–50 of 68 results for author: Karttunen, M

Learning glass transition temperatures via dimensionality reduction with data from computer simulations: Polymers as the pilot case

Authors: Artem Glova, Mikko Karttunen

Abstract: Machine learning (ML) methods provide advanced means for understanding inherent patterns within large and complex datasets. Here, we employ the principal component analysis (PCA) and the diffusion map (DM) techniques to evaluate the glass transition temperature ($T_\mathrm{g}$) from low-dimensional representations of all-atom molecular dynamic (MD) simulations of polylactide (PLA) and poly(3-hydro… ▽ More Machine learning (ML) methods provide advanced means for understanding inherent patterns within large and complex datasets. Here, we employ the principal component analysis (PCA) and the diffusion map (DM) techniques to evaluate the glass transition temperature ($T_\mathrm{g}$) from low-dimensional representations of all-atom molecular dynamic (MD) simulations of polylactide (PLA) and poly(3-hydroxybutyrate) (PHB). Four molecular descriptors were considered: radial distribution functions (RDFs), mean square displacements (MSDs), relative square displacements (RSDs), and dihedral angles (DAs). By applying a Gaussian Mixture Model (GMM) to analyze the PCA and DM projections, and by quantifying their log-likelihoods as a density-based metric, a distinct separation into two populations corresponding to melt and glass states was revealed. This separation enabled the $T_\mathrm{g}$ evaluation from a cooling-induced sharp increase in the overlap between log-likelihood distributions at different temperatures. $T_\mathrm{g}$ values derived from the RDF and MSD descriptors using DM closely matched the standard computer simulation-based dilatometric and dynamic $T_\mathrm{g}$ values for both PLA and PHB models. This was not the case for PCA. The DM-transformed DA and RSD data resulted in $T_\mathrm{g}$ values in agreement with experimental ones. Overall, the fusion of atomistic simulations and diffusion maps complemented with the Gaussian Mixture Models presents a promising framework for computing $T_\mathrm{g}$ and studying the glass transition in a unified way across various molecular descriptors for glass-forming materials. △ Less

Submitted 28 June, 2024; originally announced June 2024.

Jamming Crossovers in a Confined Driven Polymer in Solution

Authors: Setarehalsadat Changizrezaei, Mikko Karttunen, Colin Denniston

Abstract: We use lattice-Boltzmann molecular dynamics (LBMD) simulations to study the compression of a confined polymer immersed in a fluid and pushed by a large spherical colloid with a diameter comparable to the channel width. We examined the chain's deformation with both purely repulsive and weakly attractive Lennard-Jones (LJ) potentials applied between the monomers. The sphere's velocity was varied ove… ▽ More We use lattice-Boltzmann molecular dynamics (LBMD) simulations to study the compression of a confined polymer immersed in a fluid and pushed by a large spherical colloid with a diameter comparable to the channel width. We examined the chain's deformation with both purely repulsive and weakly attractive Lennard-Jones (LJ) potentials applied between the monomers. The sphere's velocity was varied over 3 orders of magnitude. The chain is in a non-dense state at low pushing velocities for both repulsive and attractive monomer interactions. When the velocity of the spherical colloid exceeds a threshold $v^*$, the back end of the chain transitions to a high density state with low mean square monomer displacement (MSD) values. The front end, however, remains in a non-dense state with high MSD indicating a pseudo two-state coexistence. This crossover is also revealed through volume per monomer and MSD as a function of the sphere's velocity. We also studied polymer dynamics by investigating folding events at different times. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Comments: 17 pages, 11 figures

Non-Stokesian dynamics of magnetic helical nanoswimmers under confinement

Authors: Alireza Fazeli, Vaibhav Thakore, Tapio Ala-Nissila, Mikko Karttunen

Abstract: Electromagnetically propelled helical nanoswimmers offer great potential for nanorobotic applications. Here, the effect of confinement on their propulsion is characterized using lattice-Boltzmann simulations. Two principal mechanisms give rise to their forward motion under confinement: 1) pure swimming, and 2) the thrust created by the differential pressure due to confinement. Under strong confine… ▽ More Electromagnetically propelled helical nanoswimmers offer great potential for nanorobotic applications. Here, the effect of confinement on their propulsion is characterized using lattice-Boltzmann simulations. Two principal mechanisms give rise to their forward motion under confinement: 1) pure swimming, and 2) the thrust created by the differential pressure due to confinement. Under strong confinement, they face greater rotational drag, but display a faster propulsion for fixed driving frequency in agreement with experimental findings. This is due to the increased differential pressure created by the boundary walls when they are sufficiently close to each other and the particle. Two new analytical relations are presented: 1) for predicting the swimming speed of an unconfined particle as a function of its angular speed and geometrical properties, and 2) an empirical expression to accurately predict the propulsion speed of a confined swimmer as a function of the degree of confinement and its unconfined swimming speed. At low driving frequencies and degrees of confinement, the systems retain the expected linear behavior consistent with the predictions of the Stokes equation. However, as the driving frequency and/or the degree of confinement increase, their impact on propulsion leads to increasing deviations from the Stokesian regime and emergence of nonlinear behavior. △ Less

Submitted 1 November, 2023; originally announced November 2023.

A Framework Based on Symbolic Regression Coupled with eXtended Physics-Informed Neural Networks for Gray-Box Learning of Equations of Motion from Data

Authors: Elham Kiyani, Khemraj Shukla, George Em Karniadakis, Mikko Karttunen

Abstract: We propose a framework and an algorithm to uncover the unknown parts of nonlinear equations directly from data. The framework is based on eXtended Physics-Informed Neural Networks (X-PINNs), domain decomposition in space-time, but we augment the original X-PINN method by imposing flux continuity across the domain interfaces. The well-known Allen-Cahn equation is used to demonstrate the approach. T… ▽ More We propose a framework and an algorithm to uncover the unknown parts of nonlinear equations directly from data. The framework is based on eXtended Physics-Informed Neural Networks (X-PINNs), domain decomposition in space-time, but we augment the original X-PINN method by imposing flux continuity across the domain interfaces. The well-known Allen-Cahn equation is used to demonstrate the approach. The Frobenius matrix norm is used to evaluate the accuracy of the X-PINN predictions and the results show excellent performance. In addition, symbolic regression is employed to determine the closed form of the unknown part of the equation from the data, and the results confirm the accuracy of the X-PINNs based approach. To test the framework in a situation resembling real-world data, random noise is added to the datasets to mimic scenarios such as the presence of thermal noise or instrument errors. The results show that the framework is stable against significant amount of noise. As the final part, we determine the minimal amount of data required for training the neural network. The framework is able to predict the correct form and coefficients of the underlying dynamical equation when at least 50\% data is used for training. △ Less

Submitted 18 May, 2023; originally announced May 2023.

Effect of substrate heterogeneity and topology on epithelial tissue growth dynamics

Authors: Mahmood Mazarei, Jan Astrom, Jan Westerlund, Mikko Karttunen

Abstract: Tissue growth kinetics and interface dynamics depend on the properties of the tissue environment and cell-cell interactions. In cellular environments, substrate heterogeneity and geometry arise from a variety factors, such as the structure of the extracellular matrix and nutrient concentration. We used the CellSim3D model, a kinetic division simulator, to investigate the growth kinetics and interf… ▽ More Tissue growth kinetics and interface dynamics depend on the properties of the tissue environment and cell-cell interactions. In cellular environments, substrate heterogeneity and geometry arise from a variety factors, such as the structure of the extracellular matrix and nutrient concentration. We used the CellSim3D model, a kinetic division simulator, to investigate the growth kinetics and interface roughness dynamics of epithelial tissue growth on heterogeneous substrates with varying topologies. The results show that the presence of quenched disorder has a clear effect on the colony morphology and the roughness scaling of the interface in the moving interface regime. In a medium with quenched disorder, the tissue interface has a smaller interface roughness exponent, $α$, and a larger growth exponent, $β$. The scaling exponents also depend on the topology of the substrate and cannot be categorized by well-known universality classes. △ Less

Submitted 20 March, 2023; originally announced March 2023.

Epithelial Tissue Growth Dynamics: Universal or Not?

Authors: Mahmood Mazarei, Jan Åström, Jan Westerholm, Mikko Karttunen

Abstract: Universality of interfacial roughness in growing epithelial tissue has remained a controversial issue. Kardar-Parisi-Zhang (KPZ) and Molecular Beam Epitaxy (MBE) universality classes have been reported among other behaviors including total lack of universality. Here, we utilize a kinetic division model for deformable cells to investigate cell-colony scaling. With seemingly minor model changes, it… ▽ More Universality of interfacial roughness in growing epithelial tissue has remained a controversial issue. Kardar-Parisi-Zhang (KPZ) and Molecular Beam Epitaxy (MBE) universality classes have been reported among other behaviors including total lack of universality. Here, we utilize a kinetic division model for deformable cells to investigate cell-colony scaling. With seemingly minor model changes, it can reproduce both KPZ- and MBE-like scaling in configurations that mimic the respective experiments. This result neutralizes the apparent scaling controversy. It can be speculated that this diversity in growth behavior is beneficial for efficient evolution and versatile growth dynamics. △ Less

Submitted 29 March, 2022; originally announced March 2022.

Temperature-resilient anapole modes associated with TE polarization in semiconductor nanowire

Authors: Vaibhav Thakore, Tapio Ala-Nissila, Mikko Karttunen

Abstract: Polarization-dependent scattering anisotropy of cylindrical nanowires has numerous potential applications in, for example, nanoantennas, photothermal therapy, thermophotovoltaics, catalysis, sensing, optical filters and switches. In all these applications, temperature-dependent material properties play an important role and often adversely impact performance depending on the dominance of either ra… ▽ More Polarization-dependent scattering anisotropy of cylindrical nanowires has numerous potential applications in, for example, nanoantennas, photothermal therapy, thermophotovoltaics, catalysis, sensing, optical filters and switches. In all these applications, temperature-dependent material properties play an important role and often adversely impact performance depending on the dominance of either radiative or dissipative damping. Here, we employ numerical modeling based on Mie scattering theory to investigate and compare the temperature and polarization-dependent optical anisotropy of metallic (gold, Au) nanowires with indirect (silicon, Si) and direct (gallium arsenide, GaAs) bandgap semiconducting nanowires. Results indicate that plasmonic scattering resonances in semiconductors, within the absorption band, deteriorate with an increase in temperature whereas those occurring away from the absorption band strengthen as a result of the increase in phononic contribution. Indirect-bandgap thin ($20 \,\mathrm{nm}$) Si nanowires present low absorption efficiencies for both the transverse electric (TE, $E_{\perp}$) and magnetic (TM, $E_{\parallel}$) modes, and high scattering efficiencies for the TM mode at shorter wavelengths making them suitable as highly efficient scatterers. Temperature-resilient higher-order anapole modes with their characteristic high absorption and low scattering efficiencies are also observed in the semiconductor nanowires ($r \! = \! 125 \! - \! 130$ nm) for the TE polarization. Herein, the GaAs nanowires present $3 \! - \! 7$ times greater absorption efficiencies compared to the Si nanowires making them especially suitable for temperature-resilient applications such as scanning near-field optical microscopy (SNOM), localized heating, non-invasive sensing or detection that require strong localization of energy in the near field. △ Less

Submitted 27 March, 2022; originally announced March 2022.

Comments: 42 pages(37 article pages + 5 pages Supplementary Information); 13 Figures (9 article figures + 4 Supplementary Information figures)

Fine-Tuning the Polarizable CL&Pol Force Field for the Deep Eutectic Solvent Ethaline

Authors: Rafael Maglia de Souza, Mikko Karttunen, Mauro Carlos Costa Ribeiro

Abstract: Polarizable force fields are gradually becoming a common choice for ionic soft matter, in particular for molecular dynamics (MD) simulations of ionic liquids (ILs) and deep eutectic solvents (DESs). The CL&Pol force field introduced in 2019 is the first general, transferable and polarizable force field for MD simulations of different types of DESs. The original formulation contains, however, some… ▽ More Polarizable force fields are gradually becoming a common choice for ionic soft matter, in particular for molecular dynamics (MD) simulations of ionic liquids (ILs) and deep eutectic solvents (DESs). The CL&Pol force field introduced in 2019 is the first general, transferable and polarizable force field for MD simulations of different types of DESs. The original formulation contains, however, some problems that appear in simulations of ethaline and may also have a broader impact. First, the originally proposed atomic diameter parameters are unbalanced, resulting in too weak interactions between the chlorides and the hydroxyl groups of the ethylene glycol molecules. This, in turn, causes an artificial phase separation in long simulations. Second, there is an overpolarization of chlorides due to strong induced dipoles that give rise to the presence of peaks and antipeaks at very low $q$-vector values (\SI{2.4}{\per\nano\meter}) in the partial components of the structure factors. In physical terms, this is equivalent to overestimated spatial nano-scale heterogeneity. To correct these problems, we adjusted the chloride-hydroxyl radial distribution functions against \textit{ab initio} data and then extended the use of the Tang-Toennis damping function for the chlorides' induced dipoles. These adjustments correct the problems without losing the robustness of the CL\&Pol force field. The results were also compared with the non-polarizable version, the CL&P force field. We expect that the corrections will facilitate reliable use of the CL&Pol force field for other types of DESs. △ Less

Submitted 28 September, 2021; originally announced September 2021.

SymPhas --General purpose software for phase-field, phase-field crystal and reaction-diffusion simulations

Authors: Steven A. Silber, Mikko Karttunen

Abstract: This work develops a new open source API and software package called \textit{SymPhas} for simulations of phase-field, phase-field crystal and reaction-diffusion models, supporting up to three dimensions and an arbitrary number of fields. \textit{SymPhas} delivers two novel program capabilities: 1) User specification of models from the associated dynamical equations in an unconstrained form and 2)… ▽ More This work develops a new open source API and software package called \textit{SymPhas} for simulations of phase-field, phase-field crystal and reaction-diffusion models, supporting up to three dimensions and an arbitrary number of fields. \textit{SymPhas} delivers two novel program capabilities: 1) User specification of models from the associated dynamical equations in an unconstrained form and 2) extensive support for integrating user-developed discrete-grid-based numerical solvers into the API. The capability to specify general phase-field models is primarily achieved by developing a novel symbolic algebra functionality that can formulate mathematical expressions at compile time, is able to apply rules of symbolic algebra such as distribution, factoring and automatic simplification, and support user-driven expression tree manipulation. A modular design based on the CC++ template meta-programming paradigm is applied to the symbolic algebra library and general API implementation to minimize application runtime and increase the accessibility of the API for third party development. \textit{SymPhas} is written in C/CC++ and emphasizes high-performance capabilities via parallelization with OpenMP and the CC++ standard library. \textit{SymPhas} is equipped with a forward Euler solver and a semi-implicit Fourier spectral solver. Sample implementations and simulations of several phase-field models are presented, generated using the semi-implicit Fourier spectral solver. △ Less

Submitted 6 September, 2021; originally announced September 2021.

Directing Near-Infrared Photon Transport with Core@Shell Particles

Authors: Kevin M. Conley, Vaibhav Thakore, Fahime Seyedheydari, Mikko Karttunen, Tapio Ala-Nissila

Abstract: Directing the propagation of near-infrared radiation is a major concern in improving the efficiency of solar cells and thermal insulators. A facile approach to scatter light in the near-infrared region without excessive heating is to embed compact layers with semiconductor particles. The directional scattering by semiconductor@oxide (core@shell) spherical particles (containing Si, InP, TiO$_2$, Si… ▽ More Directing the propagation of near-infrared radiation is a major concern in improving the efficiency of solar cells and thermal insulators. A facile approach to scatter light in the near-infrared region without excessive heating is to embed compact layers with semiconductor particles. The directional scattering by semiconductor@oxide (core@shell) spherical particles (containing Si, InP, TiO$_2$, SiO$_2$, or ZrO$_2$) with a total radius varying from 0.1 to 4.0 μm and in an insulating medium at low volume fraction is investigated using Lorenz-Mie theory and multiscale modelling. The optical response of each layers is calculated under irradiation by the sun or a blackbody emitter at 1180 K. Reflectance efficiency factors of up to 83.7% and 63.9% are achieved for near-infrared solar and blackbody radiation in 200 μm thick compact layers with only 1% volume fraction of bare Si particles with a radius of 0.23 μm and 0.50 μm, respectively. The maximum solar and blackbody efficiency factors of layers containing InP particles was slightly less (80.2% and 60.7% for bare particles with a radius of 0.25 μm and 0.60 μm, respectively). The addition of an oxide coating modifies the surrounding dielectric environment, which improves the solar reflectance efficiency factor to over 90% provided it matches the scattering mode energies with the incident spectral density. The layers are spectrally-sensitive and can be applied as a back or front reflector for solar devices, high temperature thermal insulators, and optical filters in Gradient Heat Flux Sensors for fire safety applications. △ Less

Submitted 2 July, 2020; originally announced July 2020.

Comments: 10 pages, 7 figures

Jamming and force distribution in growing epithelial tissue

Authors: Pranav Madhikar, Jan Åström, Björn Baumeier, Mikko Karttunen

Abstract: We investigate morphologies of proliferating cellular tissues using a newly developed numerical simulation model for mechanical cell division and migration in 2D. The model is applied to a bimodal mixture consisting of stiff cells with a low growth potential and soft cells with a high growth potential; cancer cells are typically considered to be softer than healthy cells. In an even mixture, the s… ▽ More We investigate morphologies of proliferating cellular tissues using a newly developed numerical simulation model for mechanical cell division and migration in 2D. The model is applied to a bimodal mixture consisting of stiff cells with a low growth potential and soft cells with a high growth potential; cancer cells are typically considered to be softer than healthy cells. In an even mixture, the soft cells develop into a tissue matrix and the stiff cells into a dendrite-like network structure. When soft cells are placed inside a tissue consisting of stiff cells (to model cancer growth), the soft cells develop to a fast growing tumor-like structure that gradually evacuates the stiff cell matrix. The model also demonstrates 1) how soft cells orient themselves in the direction of the largest effective stiffness as predicted by the theory of Bischofs and Schwarz (Proc. Natl. Acad. Sci U.S.A., 100, 9274--9279 (2003) and 2) that the orientation and force generation continue a few cell rows behind the soft-stiff interface. With increasing inter-cell friction, tumor growth slows down and cell death occurs. The contact force distribution between cells is demonstrated to be highly sensitive to cell type mixtures and cell-cell interactions, which indicates that local mechanical forces can be useful as a regulator of tissue formation. The results shed new light on established experimental data. △ Less

Submitted 4 May, 2020; originally announced May 2020.

Comments: arXiv admin note: text overlap with arXiv:1811.07573

Journal ref: Phys. Rev. Research 3, 023129 (2021)

Morphology of Proliferating Epithelial Cellular Tissue

Authors: Pranav Madhikar, Jan Åström, Björn Baumeier, Mikko Karttunen

Abstract: We investigate morphologies of proliferating cellular tissue using a newly developed numerical simulation model for mechanical cell division. The model reproduces structures of simple multi-cellular organisms via simple rules for selective division and division plane orientation. The model is applied to a bimodal mixture of stiff cells with a low growth potential and soft cells with a high growth… ▽ More We investigate morphologies of proliferating cellular tissue using a newly developed numerical simulation model for mechanical cell division. The model reproduces structures of simple multi-cellular organisms via simple rules for selective division and division plane orientation. The model is applied to a bimodal mixture of stiff cells with a low growth potential and soft cells with a high growth potential. In an even mixture, the soft cells develop into a tissue matrix and the stiff cells into a dendrite-like network structure. For soft cell inclusion in a stiff cellular matrix, the soft cells develop to a fast growing tumour like structure that gradually evacuates the stiff cell matrix. With increasing inter-cell friction, the tumour growth slows down and parts of it is driven to self-inflicted cell death. △ Less

Submitted 19 November, 2018; originally announced November 2018.

Improved general-purpose five-point model for water: TIP5P/2018

Authors: Yuriy Khalak, Bjoern Baumeier, Mikko Karttunen

Abstract: A new five point potential for liquid water, TIP5P/2018, is presented along with the techniques used to derive its charges from ab initio per-molecule electrostatic potentials in the liquid phase using the split charge equilibration (SQE) of Nistor et al. [J. Chem. Phys. 125, 094108 (2006)]. By taking the density and diffusion dependence on temperature as target properties, significant improvement… ▽ More A new five point potential for liquid water, TIP5P/2018, is presented along with the techniques used to derive its charges from ab initio per-molecule electrostatic potentials in the liquid phase using the split charge equilibration (SQE) of Nistor et al. [J. Chem. Phys. 125, 094108 (2006)]. By taking the density and diffusion dependence on temperature as target properties, significant improvements to the behavior of isothermal compressibility were achieved along with improvements to other thermodynamic and rotational properties. While exhibiting a dipole moment close to ab initio values, TIP5P/2018 suffers from a too small quadrupole moment due to the charge assignment procedure and results in an overestimation of the dielectric constant. △ Less

Submitted 18 October, 2018; originally announced October 2018.

Thermoplasmonic behavior of semiconductor nanoparticles: A comparison with metals

Authors: Vaibhav Thakore, Janika Tang, Kevin Conley, Tapio Ala-Nissila, Mikko Karttunen

Abstract: A number of applications in nanoplasmonics utilize noble metals, gold (Au) and silver (Ag), as the materials of choice. However, these materials suffer from problems of poor thermal and chemical stability accompanied by significant dissipative losses under high-temperature conditions. In this regard, semiconductor nanoparticles have attracted attention with their promising characteristics of highl… ▽ More A number of applications in nanoplasmonics utilize noble metals, gold (Au) and silver (Ag), as the materials of choice. However, these materials suffer from problems of poor thermal and chemical stability accompanied by significant dissipative losses under high-temperature conditions. In this regard, semiconductor nanoparticles have attracted attention with their promising characteristics of highly tunable plasmonic resonances, low ohmic losses and greater thermochemical stability. Here, we investigate the size-dependent thermoplasmonic properties of semiconducting silicon and gallium arsenide nanoparticles to compare them with metallic Au nanoparticles using Mie theory. To this end, we employ experimentally estimated models of dielectric permittivity in our computations. Among the various permittivity models for Au, we further compare the Drude-Lorentz (DL) and the Drude and critical points (DCP) models. Results show a redshift in the scattering and absorption resonances for the DL model while the DCP model presents a blueshift. The dissipative damping in the semiconductor nanoparticles is strongest for the sharp electric octupole resonances followed by the quadrupole and dipole modes. However, a reverse order with strongest values for the broad dipole resonance is observed for the Au nanoparticles. A massive Drude broadening contributes strongly to the damping of resonances in Au nanoparticles at elevated temperatures. In contrast, the semiconductor nanoparticles do not exhibit any significant deterioration in their scattering and absorption resonances at high temperatures. In combination with low dissipative damping, this makes the semiconductor nanoparticles better suited for high-temperature applications in nanoplasmonics wherein the noble metals suffer from excessive heating. △ Less

Submitted 2 July, 2018; originally announced July 2018.

Comments: 31 pages (20 Main Article + 11 Supplementary Information); 21 Figures (8 Main Article + 13 Supplementary Information)

Molecular Dynamics Study of Conformations of Beta-Cyclodextrin and its Eight Derivatives in Four Different Solvents

Authors: Wasinee Khuntawee, Mikko Karttunen, Jirasak Wong-ekkabut

Abstract: Understanding the atomic level interactions and the resulting structural characteristics is required for developing beta-cyclodextrin ($β$CD) derivatives for pharmaceutical and other applications. The effect of four different solvents on the structures of the native $β$CD and its hydrophilic (methylated $β$CD; ME$β$CD and hydroxypropyl $β$CD; HP$β$CD) and hydrophobic derivatives (ethylated $β$CD;… ▽ More Understanding the atomic level interactions and the resulting structural characteristics is required for developing beta-cyclodextrin ($β$CD) derivatives for pharmaceutical and other applications. The effect of four different solvents on the structures of the native $β$CD and its hydrophilic (methylated $β$CD; ME$β$CD and hydroxypropyl $β$CD; HP$β$CD) and hydrophobic derivatives (ethylated $β$CD; ET$β$CD) were explored using molecular dynamics (MD) simulations and solvation free energy calculations. The native $β$CD, 2-ME$β$CD, 6-ME$β$CD, 2,6-DM$β$CD, 2,3,6-TM$β$CD, 6-HP$β$CD, 2,6-HP$β$CD and 2,6-ET$β$CD in non-polar solvents (cyclohexane; CHX and octane; OCT) were stably formed in symmetric cyclic cavity shape through their intramolecular hydrogen bonds. In contrast, $β$CDs in polar solvents (methanol; MeOH and water; WAT) exhibited large structural changes and fluctuations leading to significant deformations of their cavities. Hydrogen bonding with polar solvents was found to be one of the major contributors to this behavior: solvent-\b{eta}CD hydrogen bonding strongly competes with intramolecular bonding leading to significant changes in structural stability of $β$CDs. The exception to this is the hydrophobic 2,6-ET$β$CD which retained its spherical cavity in all solvents. Based on this, it is proposed that 2,6-ET$β$CD can act as a sustained release drug carrier. △ Less

Submitted 2 August, 2017; originally announced August 2017.

Non-conformal coarse-grained potentials for water

Authors: Tonalli Rodríguez-López, Yuriy Khalak, Mikko Karttunen

Abstract: Water is a notoriously difficult substance to model both accurately and efficiently. Here, we focus on descriptions with a single coarse-grained particle per molecule using the so-called Approximate Non-Conformal (ANC) and generalized Stockmayer potentials as the starting points. They are fitted using the radial density function and the density of the atomistic SPC/E model by downhill simplex opti… ▽ More Water is a notoriously difficult substance to model both accurately and efficiently. Here, we focus on descriptions with a single coarse-grained particle per molecule using the so-called Approximate Non-Conformal (ANC) and generalized Stockmayer potentials as the starting points. They are fitted using the radial density function and the density of the atomistic SPC/E model by downhill simplex optimization. We compare the results with monatomic water (mW), ELBA, as well as with direct Iterative Boltzmann Inversion (IBI) of SPC/E. The results show that symmetrical potentials result in non-transferable models, that is, they need to be reparametrized for new state-points. This indicates that transferability may require more complex models. Furthermore, the results also show that the addition of a point dipole is not sufficient to make the potentials accurate and transferable to different temperatures (300 K-500 K) and pressures without an appropriate choice of properties as targets during model optimization. △ Less

Submitted 2 August, 2017; v1 submitted 1 June, 2017; originally announced June 2017.

Propulsion and controlled steering of magnetic nanohelices

Authors: Maria Michiko Alcanzare, Mikko Karttunen, Tapio Ala-Nissila

Abstract: Externally controlled motion of micro and nanomotors in a fluid environment constitutes a promising tool in biosensing, targeted delivery and environmental remediation. In particular, recent experiments have demonstrated that fuel-free propulsion can be achieved through the application of external magnetic fields on magnetic helically shaped structures. The magnetic interaction between helices and… ▽ More Externally controlled motion of micro and nanomotors in a fluid environment constitutes a promising tool in biosensing, targeted delivery and environmental remediation. In particular, recent experiments have demonstrated that fuel-free propulsion can be achieved through the application of external magnetic fields on magnetic helically shaped structures. The magnetic interaction between helices and the rotating field induces a torque that rotates and propels them via the coupled rotational-translational motion. Recent works have shown that there exist certain optimal geometries of helical shapes for propulsion. However, experiments show that controlled motion remains a challenge at the nanoscale due to Brownian motion that interferes with the deterministic motion and makes it difficult to achieve controlled steering. In the present work we employ quantitatively accurate simulation methodology to design a setup for which magnetic nanohelices of 30 nm in radius, with and without cargo, can be accurately propelled and steered in the presence of thermal fluctuations. In particular, we demonstrate fast transport of such nanomotors and devise protocols in manipulating external fields to achieve directionally controlled steering at biologically relevant temperatures. △ Less

Submitted 7 February, 2017; originally announced February 2017.

Alpha-tocopherol inhibits pore formation in the oxidized bilayers

Authors: Phansiri Boonnoy, Mikko Karttunen, Jirasak Wong-ekkabut

Abstract: In biological membranes, alpha-tocopherols (α-toc; vitamin E) protect polyunsaturated lipids from free radicals. Although the interactions of α-toc with non-oxidized lipid bilayers have been studied, their on oxidized bilayers remain unknown. In this study, atomistic molecular dynamics (MD) simulations of oxidized lipid bilayers were performed with varying concentrations of α-toc. Bilayers with 1-… ▽ More In biological membranes, alpha-tocopherols (α-toc; vitamin E) protect polyunsaturated lipids from free radicals. Although the interactions of α-toc with non-oxidized lipid bilayers have been studied, their on oxidized bilayers remain unknown. In this study, atomistic molecular dynamics (MD) simulations of oxidized lipid bilayers were performed with varying concentrations of α-toc. Bilayers with 1-palmitoyl-2-lauroyl-sn-glycero-3-phosphocholine (PLPC) lipids and its aldehyde derivatives at 1:1 ratio were studied. Our simulations show that oxidized lipids self-assemble into aggregates with a water pore rapidly developing across the lipid bilayer. The free energy of transporting an α-toc molecule in a lipid bilayer suggests that α-tocs can passively adsorb into the bilayer. When α-toc molecules were present at low concentrations in bilayers containing oxidized lipids, the formation of water pores was slowed down. At high α-toc concentra-tions, no pores were observed. Based on the simulations, we propose that the mechanism of how α-toc inhibits pore formation in bilayers with oxidized lipids is the follow-ing: α-tocs trap the polar groups of the oxidized lipids at the membrane-water interface resulting in a decreased probability for the oxidized lipids to reach contact with the two leaflets and initiate pore formation. This demon-strates that α-toc molecules not only protect the bilayer from oxidation but also help to stabilize the bilayer after lipid peroxidation occurs. These results will help in de-signing more efficient molecules to protect membranes from oxidative stress. △ Less

Submitted 22 November, 2016; originally announced November 2016.

Molecular Dynamics simulations and Kelvin Probe Force microscopy to study of cholesterol-induced electrostatic nanodomains in complex lipid mixtures

Authors: Elizabeth Drolle, W. F. D. Bennett, K. Hammond, Edward Lyman, Mikko Karttunen, Zoya Leonenko

Abstract: The molecular arrangement of lipids and proteins within biomembranes and monolayers gives rise to complex film morphologies as well as regions of distinct electrical surface potential, topographical and electrostatic nanoscale domains. To probe these nanodomains in soft matter is a challenging task both experimentally and theoretically. This work addresses the effects of cholesterol, lipid composi… ▽ More The molecular arrangement of lipids and proteins within biomembranes and monolayers gives rise to complex film morphologies as well as regions of distinct electrical surface potential, topographical and electrostatic nanoscale domains. To probe these nanodomains in soft matter is a challenging task both experimentally and theoretically. This work addresses the effects of cholesterol, lipid composition, lipid charge, and lipid phase on the monolayer structure and the electrical surface potential distribution. Atomic Force Microscopy (AFM) was used to resolve topographical nanodomains and Kelvin Probe Force Microscopy (KPFM) to resolve electrical surface potential of these nanodomains in lipid monolayers. Model monolayers composed of dipalmitoylphosphatidylcholine (DPPC), 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), 1,2-dioleoyl-sn-glycero-3-[phospho-rac-(3-lysyl(1-glycerol))] (DOPG), sphingomyelin, and cholesterol were studied. It is shown that cholesterol changes nanoscale domain formation, affecting both topography and electrical surface potential. The molecular basis for differences in electrical surface potential was addressed with atomistic molecular dynamics (MD). MD simulations qualitatively match the experimental results, with 100s of mV difference in electrostatic potential between liquid-disordered bilayer (Ld, less cholesterol and lower chain order) and a liquid-ordered bilayer (Lo, more cholesterol and higher chain order). Importantly, the difference in electrostatic properties between Lo and Ld phases suggests a new mechanism by which membrane composition couples to membrane function. △ Less

Submitted 24 November, 2016; v1 submitted 30 June, 2016; originally announced July 2016.

Getting excited: Challenges in quantum-classical studies of excitons in polymeric systems

Authors: Behnaz Bagheri, Björn Baumeier, Mikko Karttunen

Abstract: A combination of classical molecular dynamics (MM/MD) and quantum chemical calculations based on the density functional theory (DFT) was performed to describe conformational properties of diphenylethyne (DPE), methylated-DPE and poly para phenylene ethynylene (PPE). DFT calculations were employed to improve and develop force field parameters for MM/MD simulations. Many-body Green's functions theor… ▽ More A combination of classical molecular dynamics (MM/MD) and quantum chemical calculations based on the density functional theory (DFT) was performed to describe conformational properties of diphenylethyne (DPE), methylated-DPE and poly para phenylene ethynylene (PPE). DFT calculations were employed to improve and develop force field parameters for MM/MD simulations. Many-body Green's functions theory within the GW approximation and the Bethe-Salpeter equation were utilized to describe excited states of the systems. Reliability of the excitation energies based on the MM/MD conformations was examined and compared to the excitation energies from DFT conformations. The results show an overall agreement between the optical excitations based on MM/MD conformations and DFT conformations. This allows for calculation of excitation energies based on MM/MD conformations. △ Less

Submitted 9 May, 2016; originally announced May 2016.

Controlled propulsion and separation of helical particles at the nanoscale

Authors: Maria Michiko T. Alcanzare, Vaibhav Thakore, Santtu T. T. Ollila, Mikko Karttunen, Tapio Ala-Nissila

Abstract: Controlling the motion of nano and microscale objects in a fluid environment is a key factor in designing optimized tiny machines that perform mechanical tasks such as transport of drugs or genetic material in cells, fluid mixing to accelerate chemical reactions, and cargo transport in microfluidic chips. Directed motion is made possible by the coupled translational and rotational motion of asymme… ▽ More Controlling the motion of nano and microscale objects in a fluid environment is a key factor in designing optimized tiny machines that perform mechanical tasks such as transport of drugs or genetic material in cells, fluid mixing to accelerate chemical reactions, and cargo transport in microfluidic chips. Directed motion is made possible by the coupled translational and rotational motion of asymmetric particles. A current challenge in achieving directed and controlled motion at the nanoscale lies in overcoming random Brownian motion due to thermal fluctuations in the fluid. We use a hybrid lattice-Boltzmann Molecular Dynamics method with full hydrodynamic interactions and thermal fluctuations to demonstrate that controlled propulsion of individual nanohelices in an aqueous environment is possible. We optimize the propulsion velocity and the efficiency of externally driven nanohelices. We quantify the importance of the thermal effects on the directed motion by calculating the Péclet number for various shapes, number of turns and pitch lengths of the helices. Consistent with the experimental microscale separation of chiral objects, our results indicate that in the presence of thermal fluctuations at Péclet numbers $>10$, chiral particles follow the direction of propagation according to its handedness and the direction of the applied torque making separation of chiral particles possible at the nanoscale. Our results provide criteria for the design and control of helical machines at the nanoscale. △ Less

Submitted 30 January, 2017; v1 submitted 3 May, 2016; originally announced May 2016.

Solvent effects on optical excitations of poly para phenylene ethynylene studied by QM/MM simulations based on Many-Body Green's Functions Theory

Authors: Behnaz Bagheri, Mikko Karttunen, Björn Baumeier

Abstract: Electronic excitations in dilute solutions of poly para phenylene ethynylene (poly-PPE) are studied using a QM/MM approach combining many-body Green's functions theory within the $GW$ approximation and the Bethe-Salpeter equation with polarizable force field models. Oligomers up to a length of 7.5\,nm (10 repeat units) functionalized with nonyl side chains are solvated in toluene and water, respec… ▽ More Electronic excitations in dilute solutions of poly para phenylene ethynylene (poly-PPE) are studied using a QM/MM approach combining many-body Green's functions theory within the $GW$ approximation and the Bethe-Salpeter equation with polarizable force field models. Oligomers up to a length of 7.5\,nm (10 repeat units) functionalized with nonyl side chains are solvated in toluene and water, respectively. After equilibration using atomistic molecular dynamics (MD), the system is partitioned into a quantum region (backbone) embedded into a classical (side chains and solvent) environment. Optical absorption properties are calculated solving the coupled QM/MM system self-consistently and special attention is paid to the effects of solvents. The model allows to differentiate the influence of oligomer conformation induced by the solvation from electronic effects related to local electric fields and polarization. It is found that the electronic environment contributions are negligible compared to the conformational dynamics of the conjugated PPE. An analysis of the electron-hole wave function reveals a sensitivity of energy and localization characteristics of the excited states to bends in the global conformation of the oligomer rather than to the relative of phenyl rings along the backbone. △ Less

Submitted 2 May, 2016; originally announced May 2016.

The good, the bad and the user in soft matter simulations

Authors: Jirasak Wong-ekkabut, Mikko Karttunen

Abstract: Molecular dynamics (MD) simulations have become popular in materials science, biochemistry, biophysics and several other fields. Improvements in computational resources, in quality of force field parameters and algorithms have yielded significant improvements in performance and reliability. On the other hand, no method of research is error free. In this review, we discuss a few examples of errors… ▽ More Molecular dynamics (MD) simulations have become popular in materials science, biochemistry, biophysics and several other fields. Improvements in computational resources, in quality of force field parameters and algorithms have yielded significant improvements in performance and reliability. On the other hand, no method of research is error free. In this review, we discuss a few examples of errors and artifacts due to various sources and discuss how to avoid them. Besides bringing attention to artifacts and proper practices in simulations, we also aim to provide the reader with a starting point to explore these issues further. In particular, we hope that the discussion encourages researchers to check software, parameters, protocols and, most importantly, their own practices in order to minimize the possibility of errors. The focus here is on practical issues. △ Less

Submitted 1 February, 2016; originally announced February 2016.

Journal ref: BBA Biomembranes 1858, 2529-2538 (2016)

Ab initio calculations of optical properties of silver clusters: Cross-over from molecular to nanoscale behavior

Authors: John T. Titantah, Mikko Karttunen

Abstract: Electronic and optical properties of silver clusters were calculated using two different \textit{ab initio} approaches: 1) based on all-electron full-potential linearized-augmented plane-wave method and 2) local basis function pseudopotential approach. Agreement is found between the two methods for small and intermediate sized clusters for which the former method is limited due to its all-electron… ▽ More Electronic and optical properties of silver clusters were calculated using two different \textit{ab initio} approaches: 1) based on all-electron full-potential linearized-augmented plane-wave method and 2) local basis function pseudopotential approach. Agreement is found between the two methods for small and intermediate sized clusters for which the former method is limited due to its all-electron formulation. The latter, due to non-periodic boundary conditions, is the more natural approach to simulate small clusters. The effect of cluster size is then explored using the local basis function approach. We find that as the cluster size increases, the electronic structure undergoes a transition from molecular behavior to nanoparticle behavior at a cluster size of 140 atoms (diameter $\sim 1.7$\,nm). Above this cluster size the step-like electronic structure, evident as several features in the imaginary part of the polarizability of all clusters smaller than Ag$_\mathrm{147}$, gives way to a dominant plasmon peak localized at wavelengths 350\,nm$\leλ\le$ 600\,nm. It is, thus, at this length-scale that the conduction electrons' collective oscillations that are responsible for plasmonic resonances begin to dominate the opto-electronic properties of silver nanoclusters. △ Less

Submitted 31 January, 2016; originally announced February 2016.

Journal ref: Eur. Phys. J. B 89 125 (2016)

Micelle fragmentation and wetting in confined flow

Authors: Mona Habibi, Colin Denniston, Mikko Karttunen

Abstract: We use coarse-grained molecular-dynamics (MD) simulations to investigate the structural and dynamical properties of micelles under non-equilibrium Poiseuille flow in a nano-confined geometry. The effects of flow, confinement, and the wetting properties of die-channel walls on spherical sodium dodecyl sulfate (SDS) micelles are explored when the micelle is forced through a die-channel slightly smal… ▽ More We use coarse-grained molecular-dynamics (MD) simulations to investigate the structural and dynamical properties of micelles under non-equilibrium Poiseuille flow in a nano-confined geometry. The effects of flow, confinement, and the wetting properties of die-channel walls on spherical sodium dodecyl sulfate (SDS) micelles are explored when the micelle is forced through a die-channel slightly smaller than its equilibrium size. Inside the channel, the micelle may fragment into smaller micelles. In addition to the flow rate, the wettability of the channel surfaces dictates whether the micelle fragments and determines the size of the daughter micelles: The overall behavior is determined by the subtle balance between hydrodynamic forces, micelle-wall interactions and self-assembly forces. △ Less

Submitted 30 September, 2014; originally announced September 2014.

Modeling the Behavior of Confined Colloidal Particles Under Shear Flow

Authors: Frances E. Mackay, Kyle Pastor, Mikko Karttunen, Colin Denniston

Abstract: We investigate the behavior of colloidal suspensions with different volume fractions confined between parallel walls under a range of steady shears. We model the particles using molecular dynamics (MD) with full hydrodynamic interactions implemented through the use of a lattice-Boltzmann (LB) fluid. A quasi-2d ordering occurs in systems characterized by a coexistence of coupled layers with differe… ▽ More We investigate the behavior of colloidal suspensions with different volume fractions confined between parallel walls under a range of steady shears. We model the particles using molecular dynamics (MD) with full hydrodynamic interactions implemented through the use of a lattice-Boltzmann (LB) fluid. A quasi-2d ordering occurs in systems characterized by a coexistence of coupled layers with different densities, order, and granular temperature. We present a phase diagram in terms of shear and volume fraction for each layer, and demonstrate that particle exchange between layers is required for entering the disordered phase. △ Less

Submitted 17 September, 2014; originally announced September 2014.

Crossovers in supercooled solvation water: Effects of hydrophilic & hydrophobic interactions

Authors: John T. Titantah, Mikko Karttunen

Abstract: We use systematic 8 ns ab initio molecular dynamics (AIMD) to study the structure and dynamics of water in bulk, and close to both hydrophobic and hydrophilic (carbonyl) groups of tetramethylurea (TMU). We observe crossovers in the dynamical behavior around the hydrophobic group at $T_X = 256 \pm 4$K and another one at $265 \pm 5$K related to the relative strength of water-water and water-carbonyl… ▽ More We use systematic 8 ns ab initio molecular dynamics (AIMD) to study the structure and dynamics of water in bulk, and close to both hydrophobic and hydrophilic (carbonyl) groups of tetramethylurea (TMU). We observe crossovers in the dynamical behavior around the hydrophobic group at $T_X = 256 \pm 4$K and another one at $265 \pm 5$K related to the relative strength of water-water and water-carbonyl hydrogen bonds (HBs). For bulk water, the temperature of the apparent divergence in relaxation times is located at $T_c = 210 \pm 10$K. To better identify the effects arising from the hydrophilic carbonyl group, systems of water with a methane molecule were used as references. These findings are related to the structural and thermodynamic transitions reported for proteins in solution and may also play a role in the mechanism of cold denaturation of proteins. △ Less

Submitted 7 May, 2015; v1 submitted 9 June, 2014; originally announced June 2014.

Biopolymer filtration in corrugated nanochannels

Authors: Santtu T. T. Ollila, Colin Denniston, Mikko Karttunen, Tapio Ala-Nissila

Abstract: We examine pressure-driven non-equilibrium transport of linear, circular and star polymers through a nanochannel containing a rectangular pit with full hydrodynamic interactions and thermal fluctuations. We demonstrate that with sufficiently small pressure differences, there is contour length-dependent entropic trapping of the polymer in the pit when the pit and the polymer sizes are compatible. T… ▽ More We examine pressure-driven non-equilibrium transport of linear, circular and star polymers through a nanochannel containing a rectangular pit with full hydrodynamic interactions and thermal fluctuations. We demonstrate that with sufficiently small pressure differences, there is contour length-dependent entropic trapping of the polymer in the pit when the pit and the polymer sizes are compatible. This is due to competition between flow and chain relaxation in the pit, which leads to a non-monotonic dependence of the polymer mobility on its size and should aid in the design of nanofiltration devices based on the polymer size and shape. △ Less

Submitted 24 February, 2014; originally announced February 2014.

Phase Field Crystal Model for Magneto-Elasticity in Isotropic Ferromagnetic Solids

Authors: Niloufar Faghihi, Nikolas Provatas, K. R. Elder, Martin Grant, Mikko Karttunen

Abstract: A new isotropic magneto-elastic phase field crystal (PFC) model to study the relation between morphological structure and magnetic properties of pure ferromagnetic solids is introduced. Analytic calculations were used to determine the phase diagram and obtain the relationship between elastic strains and magnetization. Time dependent numerical simulations were used to demonstrate the effect of grai… ▽ More A new isotropic magneto-elastic phase field crystal (PFC) model to study the relation between morphological structure and magnetic properties of pure ferromagnetic solids is introduced. Analytic calculations were used to determine the phase diagram and obtain the relationship between elastic strains and magnetization. Time dependent numerical simulations were used to demonstrate the effect of grain boundaries on the formation of magnetic domains. It was shown that the grain boundaries act as nucleating sites for domains of reverse magnetization. Finally, we derive a relation for coercivity versus grain mis-orientation in the isotropic limit. △ Less

Submitted 2 July, 2013; originally announced July 2013.

Water dynamics: Relation between hydrogen bond bifurcations, molecular jumps, local density & hydrophobicity

Authors: John Tatini Titantah, Mikko Karttunen

Abstract: Structure and dynamics of water remain a challenge. Resolving the properties of hydrogen bonding lies at the heart of this puzzle. Here we employ ab initio Molecular Dynamics (AIMD) simulations over a wide temperature range. The total simulation time was approx 2 ns. Both bulk water and water in the presence of a small hydrophobic molecule were simulated. We show that large-angle jumps and bond bi… ▽ More Structure and dynamics of water remain a challenge. Resolving the properties of hydrogen bonding lies at the heart of this puzzle. Here we employ ab initio Molecular Dynamics (AIMD) simulations over a wide temperature range. The total simulation time was approx 2 ns. Both bulk water and water in the presence of a small hydrophobic molecule were simulated. We show that large-angle jumps and bond bifurcations are fundamental properties of water dynamics and that they are intimately coupled to both local density and hydrogen bond stretch oscillations in scales from about 60 to a few hundred femtoseconds: Local density differences are the driving force for bond bifurcations and the consequent large-angle jumps. The jumps are intimately connected to the recently predicted energy asymmetry. Our analysis also appears to confirm the existence of the so-called negativity track provided by the lone pairs of electrons on the oxygen atom to enable water rotation. △ Less

Submitted 29 March, 2013; originally announced March 2013.

Multiphase density functional theory parameterization of the Gupta potential for silver and gold

Authors: John T. Titantah, Mikko Karttunen

Abstract: The ground state energies of Ag and Au in the face-centered cubic (FCC), body-centered cubic (BCC), simple cubic (SC) and the hypothetical diamond-like phase, and dimer were calculated as a function of bond length using density functional theory (DFT). These energies were then used to parameterize the many-body Gupta potential for Ag and Au. This parameterization over several phases of Ag and Au w… ▽ More The ground state energies of Ag and Au in the face-centered cubic (FCC), body-centered cubic (BCC), simple cubic (SC) and the hypothetical diamond-like phase, and dimer were calculated as a function of bond length using density functional theory (DFT). These energies were then used to parameterize the many-body Gupta potential for Ag and Au. This parameterization over several phases of Ag and Au was performed to guarantee transferability of the potentials and to make them appropriate for studies of related nanostructures. Depending on the structure, the energetics of the surface atoms play a crucial role in determining the details of the nanostructure. The accuracy of the parameters was tested by performing a 2 ns MD simulation of a cluster of 55 Ag atoms -- a well studied cluster of Ag, the most stable structure being the icosahedral one. Within this time scale, the initial FCC lattice was found to transform to the icosahedral structure at room temperature. The new set of parameters for Ag was then used in a temperature dependent atom-by-atom deposition of Ag nanoclusters of up to 1000 atoms. We find a deposition temperature of 500 $\pm$50 K where low energy clusters are generated, suggesting an optimal annealing temperature of 500 K for Ag cluster synthesis. △ Less

Submitted 15 November, 2012; originally announced November 2012.

Hydrodynamic Effects on Confined Polymers

Authors: Santtu T. T. Ollila, Colin Denniston, Mikko Karttunen, Tapio Ala-Nissila

Abstract: We consider the statics and dynamics of a flexible polymer confined between parallel plates both in the presence and absence of hydrodynamic interactions. The hydrodynamic interactions are described at the level of the fluctuating, compressible Navier-Stokes equation. We consider two cases: (i) confinement for both the solvent and the polymer, and (ii) confinement for the polymer only (in a 3D sol… ▽ More We consider the statics and dynamics of a flexible polymer confined between parallel plates both in the presence and absence of hydrodynamic interactions. The hydrodynamic interactions are described at the level of the fluctuating, compressible Navier-Stokes equation. We consider two cases: (i) confinement for both the solvent and the polymer, and (ii) confinement for the polymer only (in a 3D solvent), which is experimentally feasible, for instance, by (optical) trapping. We find a continuous transition from 2D to 3D dynamic scaling as a function of decreasing degree of confinement within the de Gennes and the weak-confinement regimes. We demonstrate that, in the presence of hydrodynamics, the polymer's center-of-mass diffusion coefficient in the direction parallel to the walls scales differently as a function of the level of confinement in cases (i) and (ii). We also find that in the commonly used Langevin dynamics description, the polymer swells more parallel to the walls than in the presence of hydrodynamics, and the planar diffusion coefficient shows scaling behavior similar to case (ii) rather than case (i). In addition, we quantify the differences in the static structure factor of the polymer between cases (i) and (ii), and between case (i) and Langevin dynamics. △ Less

Submitted 31 October, 2012; originally announced October 2012.

Comments: 11 pages, 10 figures

Three-dimensional "Mercedes-Benz" model for water

Authors: Cristiano L. Dias, Tapio Ala-Nissila, Martin Grant, Mikko Karttunen

Abstract: In this paper we introduce a three-dimensional version of the Mercedes-Benz model to describe water molecules. In this model van der Waals interactions and hydrogen bonds are given explicitly through a Lennard-Jones potential and a Gaussian orientation-dependent terms, respectively. At low temperature the model freezes forming Ice-I and it reproduces the main peaks of the experimental radial dis… ▽ More In this paper we introduce a three-dimensional version of the Mercedes-Benz model to describe water molecules. In this model van der Waals interactions and hydrogen bonds are given explicitly through a Lennard-Jones potential and a Gaussian orientation-dependent terms, respectively. At low temperature the model freezes forming Ice-I and it reproduces the main peaks of the experimental radial distribution function of water. In addition to these structural properties, the model also captures the thermodynamical anomalies of water: the anomalous density profile, the negative thermal expansivity, the large heat capacity and the minimum in the isothermal compressibility. △ Less

Submitted 13 February, 2009; originally announced February 2009.

Nonlinear Driven Response of a Phase-Field Crystal in a Periodic Pinning Potential

Authors: C. V. Achim, J. A. P. Ramos, M. Karttunen, K. R. Elder, E. Granato, T. Ala-Nissila, S. C. Ying

Abstract: We study numerically the phase diagram and the response under a driving force of the phase field crystal model for pinned lattice systems introduced recently for both one and two dimensional systems. The model describes the lattice system as a continuous density field in the presence of a periodic pinning potential, allowing for both elastic and plastic deformations of the lattice. We first pres… ▽ More We study numerically the phase diagram and the response under a driving force of the phase field crystal model for pinned lattice systems introduced recently for both one and two dimensional systems. The model describes the lattice system as a continuous density field in the presence of a periodic pinning potential, allowing for both elastic and plastic deformations of the lattice. We first present results for phase diagrams of the model in the absence of a driving force. The nonlinear response to a driving force on an initially pinned commensurate phase is then studied via overdamped dynamic equations of motion for different values of mismatch and pinning strengths. For large pinning strength the driven depinning transitions are continuous, and the sliding velocity varies with the force from the threshold with power-law exponents in agreement with analytical predictions. Transverse depinning transitions in the moving state are also found in two dimensions. Surprisingly, for sufficiently weak pinning potential we find a discontinuous depinning transition with hysteresis even in one dimension under overdamped dynamics. We also characterize structural changes of the system in some detail close to the depinning transition. △ Less

Submitted 12 February, 2009; originally announced February 2009.

Journal ref: Phys. Rev. E 79, 011606 (2009)

Dynamical Scaling Exponents for Polymer Translocation through a Nanopore

Authors: Kaifu Luo, Santtu T. T. Ollila, Ilkka Huopaniemi, Tapio Ala-Nissila, Pawel Pomorski, Mikko Karttunen, See-Chen Ying, Aniket Bhattacharya

Abstract: We determine the scaling exponents of polymer translocation (PT) through a nanopore by extensive computer simulations of various microscopic models for chain lengths extending up to N=800 in some cases. We focus on the scaling of the average PT time $τ\sim N^α$ and the mean-square change of the PT coordinate $<s^2(t)> \sim t^β$. We find $α=1+2ν$ and $β=2/α$ for unbiased PT in 2D and 3D. The rela… ▽ More We determine the scaling exponents of polymer translocation (PT) through a nanopore by extensive computer simulations of various microscopic models for chain lengths extending up to N=800 in some cases. We focus on the scaling of the average PT time $τ\sim N^α$ and the mean-square change of the PT coordinate $<s^2(t)> \sim t^β$. We find $α=1+2ν$ and $β=2/α$ for unbiased PT in 2D and 3D. The relation $αβ=2$ holds for driven PT in 2D, with crossover from $α\approx 2ν$ for short chains to $α\approx 1+ν$ for long chains. This crossover is, however, absent in 3D where $α= 1.42 \pm 0.01$ and $αβ\approx 2.2$ for $N \approx 40-800$. △ Less

Submitted 16 October, 2008; v1 submitted 28 May, 2008; originally announced May 2008.

Comments: 4 pages, 4 figures, minor changes in the text, To be published in: Phys. Rev. E 78, xxxxxx(R) (2008)

Journal ref: Phys. Rev. E 78, 050901(R) (2008)

Comment on ``Passage Times for Unbiased Polymer Translocation through a Narrow Pore''

Authors: Kaifu Luo, Tapio Ala-Nissila, See-Chen Ying, Pawel Pomorski, Mikko Karttunen

Abstract: One of the most fundamental quantities associated with polymer translocation through a nanopore is the translocation time $τ$ and its dependence on the chain length $N$. Our simulation results based on both the bond fluctuation Monte Carlo and Molecular Dynamics methods confirm the original prediction $τ\sim N^{2ν+1}$, which scales in the same manner as the Rouse relaxation time of the chain exc… ▽ More One of the most fundamental quantities associated with polymer translocation through a nanopore is the translocation time $τ$ and its dependence on the chain length $N$. Our simulation results based on both the bond fluctuation Monte Carlo and Molecular Dynamics methods confirm the original prediction $τ\sim N^{2ν+1}$, which scales in the same manner as the Rouse relaxation time of the chain except for a larger prefactor, and invalidates other scaling claims. △ Less

Submitted 27 November, 2007; v1 submitted 28 September, 2007; originally announced September 2007.

Comments: 1+pages, 1 Figure, Minor changes

Journal ref: see details in Phys. Rev. E 78, 050901(R) (2008)

Enhanced dielectrophoresis of nanocolloids by dimer formation

Authors: Emppu Salonen, Emma Terama, Ilpo Vattulainen, Mikko Karttunen

Abstract: We investigate the dielectrophoretic motion of charge-neutral, polarizable nanocolloids through molecular dynamics simulations. Comparison to analytical results derived for continuum systems shows that the discrete charge distributions on the nanocolloids have a significant impact on their coupling to the external field. Aggregation of nanocolloids leads to enhanced dielectrophoretic transport,… ▽ More We investigate the dielectrophoretic motion of charge-neutral, polarizable nanocolloids through molecular dynamics simulations. Comparison to analytical results derived for continuum systems shows that the discrete charge distributions on the nanocolloids have a significant impact on their coupling to the external field. Aggregation of nanocolloids leads to enhanced dielectrophoretic transport, provided that increase in the dipole moment upon aggregation can overcome the related increase in friction. The dimer orientation and the exact structure of the nanocolloid charge distribution are shown to be important in the enhanced transport. △ Less

Submitted 23 April, 2007; originally announced April 2007.

Microscopic mechanism for cold denaturation

Authors: Cristiano L. Dias, Tapio Ala-Nissila, Mikko Karttunen, Ilpo Vattulainen, Martin Grant

Abstract: We elucidate the mechanism of cold denaturation through constant-pressure simulations for a model of hydrophobic molecules in an explicit solvent. We find that the temperature dependence of the hydrophobic effect is the driving force/induces/facilitates cold denaturation. The physical mechanism underlying this phenomenon is identified as the destabilization of hydrophobic contact in favor of sol… ▽ More We elucidate the mechanism of cold denaturation through constant-pressure simulations for a model of hydrophobic molecules in an explicit solvent. We find that the temperature dependence of the hydrophobic effect is the driving force/induces/facilitates cold denaturation. The physical mechanism underlying this phenomenon is identified as the destabilization of hydrophobic contact in favor of solvent separated configurations, the same mechanism seen in pressure induced denaturation. A phenomenological explanation proposed for the mechanism is suggested as being responsible for cold denaturation in real proteins. △ Less

Submitted 20 April, 2007; originally announced April 2007.

Phase Diagram and Commensurate-Incommensurate Transitions in the Phase Field Crystal Model with an External Pinning Potential

Authors: C. V. Achim, M. Karttunen, K. R. Elder, E. Granato, T. Ala-Nissila, S. C. Ying

Abstract: We study the phase diagram and the commensurate-incommensurate transitions in a phase field model of a two-dimensional crystal lattice in the presence of an external pinning potential. The model allows for both elastic and plastic deformations and provides a continuum description of lattice systems, such as for adsorbed atomic layers or two-dimensional vortex lattices. Analytically, a mode expan… ▽ More We study the phase diagram and the commensurate-incommensurate transitions in a phase field model of a two-dimensional crystal lattice in the presence of an external pinning potential. The model allows for both elastic and plastic deformations and provides a continuum description of lattice systems, such as for adsorbed atomic layers or two-dimensional vortex lattices. Analytically, a mode expansion analysis is used to determine the ground states and the commensurate-incommensurate transitions in the model as a function of the strength of the pinning potential and the lattice mismatch parameter. Numerical minimization of the corresponding free energy shows good agreement with the analytical predictions and provides details on the topological defects in the transition region. We find that for small mismatch the transition is of first-order, and it remains so for the largest values of mismatch studied here. Our results are consistent with results of simulations for atomistic models of adsorbed overlayers. △ Less

Submitted 8 August, 2006; originally announced August 2006.

Journal ref: PHYSICAL REVIEW E 74, 021104 (2006)

Reptational dynamics in dissipative particle dynamics simulations of polymer melts

Authors: P. Nikunen, I. Vattulainen, M. Karttunen

Abstract: Understanding the complex viscoelastic properties of polymeric liquids remains a challenge in materials science and soft matter physics. Here, we present a simple and computationally efficient criterion for the topological constraints in polymeric liquids using the Dissipative Particle Dynamics (DPD). The same approach is also applicable in other soft potential models. For short chains the model… ▽ More Understanding the complex viscoelastic properties of polymeric liquids remains a challenge in materials science and soft matter physics. Here, we present a simple and computationally efficient criterion for the topological constraints in polymeric liquids using the Dissipative Particle Dynamics (DPD). The same approach is also applicable in other soft potential models. For short chains the model correctly reproduces Rouse-like dynamics whereas for longer chains the dynamics becomes reptational as the chain length is increased - something that is not attainable using standard DPD or other coarse-grained soft potential methods. Importantly, no new length scales or forces need to be added. △ Less

Submitted 12 December, 2005; originally announced December 2005.

Dielectrophoresis of nanocolloids: a molecular dynamics study

Authors: E. Salonen, E. Terama, I. Vattulainen, M. Karttunen

Abstract: Dielectrophoresis (DEP), the motion of polarizable particles in non-uniform electric fields, has become an important tool for the transport, separation, and characterization of microparticles in biomedical and nanoelectronics research. In this article we present, to our knowledge, the first molecular dynamics simulations of DEP of nanometer-sized colloidal particles. We introduce a simplified mo… ▽ More Dielectrophoresis (DEP), the motion of polarizable particles in non-uniform electric fields, has become an important tool for the transport, separation, and characterization of microparticles in biomedical and nanoelectronics research. In this article we present, to our knowledge, the first molecular dynamics simulations of DEP of nanometer-sized colloidal particles. We introduce a simplified model for polarizable nanoparticles, consisting of a large charged macroion and oppositely charged microions, in an explicit solvent. The model is then used to study DEP motion of the particle at different combinations of temperature and electric field strength. In accord with linear response theory, the particle drift velocities are shown to be proportional to the DEP force. Analysis of the colloid DEP mobility shows a clear time dependence, demonstrating the variation of friction under non-equilibrium. The time dependence of the mobility further results in an apparent weak variation of the DEP displacements with temperature. △ Less

Submitted 9 November, 2005; originally announced November 2005.

Journal ref: Eur. Phys. J. E 18, 133-142 (2005)

Molecular Dynamics Study of Charged Dendrimers in Salt-Free Solution: Effect of Counterions

Authors: Andrey A. Gurtovenko, Sergey V. Lyulin, Mikko Karttunen, Ilpo Vattulainen

Abstract: Polyamidoamine (PAMAM) dendrimers, being protonated under physiological conditions, represent a promising class of nonviral, nano-sized vectors for drug and gene delivery. We performed extensive molecular dynamics simulations of a generic model dendrimer in a salt-free solution with dendrimer's terminal beads positively charged. Solvent molecules as well as counterions were explicitly included a… ▽ More Polyamidoamine (PAMAM) dendrimers, being protonated under physiological conditions, represent a promising class of nonviral, nano-sized vectors for drug and gene delivery. We performed extensive molecular dynamics simulations of a generic model dendrimer in a salt-free solution with dendrimer's terminal beads positively charged. Solvent molecules as well as counterions were explicitly included as interacting beads. We find that the size of the charged dendrimer depends non-monotonically on the strength of electrostatic interactions demonstrating a maximum when the Bjerrum length equals the diameter of a bead. Many other structural and dynamic characteristics of charged dendrimers are also found to follow this pattern. We address such a behavior to the interplay between repulsive interactions of the charged terminal beads and their attractive interactions with oppositely charged counterions. The former favors swelling at small Bjerrum lengths and the latter promotes counterion condensation. Thus, counterions can have a dramatic effect on the structure and dynamics of charged dendrimers and, under certain conditions, cannot be treated implicitly. △ Less

Submitted 9 November, 2005; originally announced November 2005.

Spectral representation of the effective dielectric constant of graded composites

Authors: L. Dong, Mikko Karttunen, K. W. Yu

Abstract: We generalize the Bergman-Milton spectral representation, originally derived for a two-component composite, to extract the spectral density function for the effective dielectric constant of a graded composite. This work has been motivated by a recent study of the optical absorption spectrum of a graded metallic film [Applied Physics Letters, 85, 94 (2004)] in which a broad surface-plasmon absorp… ▽ More We generalize the Bergman-Milton spectral representation, originally derived for a two-component composite, to extract the spectral density function for the effective dielectric constant of a graded composite. This work has been motivated by a recent study of the optical absorption spectrum of a graded metallic film [Applied Physics Letters, 85, 94 (2004)] in which a broad surface-plasmon absorption band has been shown to be responsible for enhanced nonlinear optical response as well as an attractive figure of merit. It turns out that, unlike in the case of homogeneous constituent components, the characteristic function of a graded composite is a continuous function because of the continuous variation of the dielectric function within the constituent components. Analytic generalization to three dimensional graded composites is discussed, and numerical calculations of multilayered composites are given as a simple application. △ Less

Submitted 16 June, 2005; originally announced June 2005.

Comments: Physical Review E, submitted for publications

Journal ref: Phys. Rev. E 72, 016613 (2005)

Long-range interactions & parallel scalability in molecular simulations

Authors: Michael Patra, Marja T. Hyvonen, Emma Falck, Mohsen Sabouri-Ghomi, Ilpo Vattulainen, Mikko Karttunen

Abstract: Typical biomolecular systems such as cellular membranes, DNA, and protein complexes are highly charged. Thus, efficient and accurate treatment of electrostatic interactions is of great importance in computational modelling of such systems. We have employed the GROMACS simulation package to perform extensive benchmarking of different commonly used electrostatic schemes on a range of computer arch… ▽ More Typical biomolecular systems such as cellular membranes, DNA, and protein complexes are highly charged. Thus, efficient and accurate treatment of electrostatic interactions is of great importance in computational modelling of such systems. We have employed the GROMACS simulation package to perform extensive benchmarking of different commonly used electrostatic schemes on a range of computer architectures (Pentium-4, IBM Power 4, and Apple/IBM G5) for single processor and parallel performance up to 8 nodes - we have also tested the scalability on four different networks, namely Infiniband, GigaBit Ethernet, Fast Ethernet, and nearly uniform memory architecture, i.e., communication between CPUs is possible by directly reading from or writing to other CPUs' local memory. It turns out that the particle-mesh Ewald method (PME) performs surprisingly well and offers competitive performance unless parallel runs on PC hardware with older network infrastructure are needed. Lipid bilayers of sizes 128, 512 and 2048 lipid molecules were used as the test systems representing typical cases encountered in biomolecular simulations. Our results enable an accurate prediction of computational speed on most current computing systems, both for serial and parallel runs. These results should be helpful in, for example, choosing the most suitable configuration for a small departmental computer cluster. △ Less

Submitted 21 June, 2006; v1 submitted 8 October, 2004; originally announced October 2004.

Impact of Cholesterol on Voids in Phospholipid Membranes

Authors: Emma Falck, Michael Patra, Mikko Karttunen, Marja T. Hyvonen, Ilpo Vattulainen

Abstract: Free volume pockets or voids are important to many biological processes in cell membranes. Free volume fluctuations are a prerequisite for diffusion of lipids and other macromolecules in lipid bilayers. Permeation of small solutes across a membrane, as well as diffusion of solutes in the membrane interior are further examples of phenomena where voids and their properties play a central role. Cho… ▽ More Free volume pockets or voids are important to many biological processes in cell membranes. Free volume fluctuations are a prerequisite for diffusion of lipids and other macromolecules in lipid bilayers. Permeation of small solutes across a membrane, as well as diffusion of solutes in the membrane interior are further examples of phenomena where voids and their properties play a central role. Cholesterol has been suggested to change the structure and function of membranes by altering their free volume properties. We study the effect of cholesterol on the properties of voids in dipalmitoylphosphatidylcholine (DPPC) bilayers by means of atomistic molecular dynamics simulations. We find that an increasing cholesterol concentration reduces the total amount of free volume in a bilayer. The effect of cholesterol on individual voids is most prominent in the region where the steroid ring structures of cholesterol molecules are located. Here a growing cholesterol content reduces the number of voids, completely removing voids of the size of a cholesterol molecule. The voids also become more elongated. The broad orientational distribution of voids observed in pure DPPC is, with a 30% molar concentration of cholesterol, replaced by a distribution where orientation along the bilayer normal is favored. Our results suggest that instead of being uniformly distributed to the whole bilayer, these effects are localized to the close vicinity of cholesterol molecules. △ Less

Submitted 17 August, 2004; originally announced August 2004.

Under the influence of alcohol: The effect of ethanol and methanol on lipid bilayers

Authors: Michael Patra, Emppu Salonen, Emma Terama, Roland Faller, Bryan W. Lee, Juha Holopainen, Mikko Karttunen

Abstract: Extensive microscopic molecular dynamics simulations have been performed to study the effects of short-chain alcohols, methanol and ethanol, on two different fully hydrated lipid bilayer systems in the fluid phase at 323 K. It is found that ethanol has a stronger effect on the structural properties of the membranes. In particular, the bilayers become more fluid and permeable: Ethanol molecules a… ▽ More Extensive microscopic molecular dynamics simulations have been performed to study the effects of short-chain alcohols, methanol and ethanol, on two different fully hydrated lipid bilayer systems in the fluid phase at 323 K. It is found that ethanol has a stronger effect on the structural properties of the membranes. In particular, the bilayers become more fluid and permeable: Ethanol molecules are able to penetrate through the membrane in typical time scales of about 200 ns whereas for methanol that time scale is considerably longer, at least of the order of microseconds. We find good agreement with NMR and micropipette studies. We have also measured partitioning coefficients and the rate of crossing events for alcohols, i.e., typical time scale it takes for a molecule to cross the lipid bilayer and to move from one leaflet to the other. For structural properties, two-dimensional centre of mass radial-distribution functions indicate the possibility for quasi long-range order for ethanol-ethanol correlations in contrast to liquid-like behaviour for all other combinations. △ Less

Submitted 5 August, 2004; originally announced August 2004.

Coarse-Grained Model for Phospholipid/Cholesterol Bilayer

Authors: Teemu Murtola, Emma Falck, Michael Patra, Mikko Karttunen, Ilpo Vattulainen

Abstract: We construct a coarse-grained (CG) model for dipalmitoylphosphatidylcholine (DPPC)/cholesterol bilayers and apply it to large-scale simulation studies of lipid membranes. Our CG model is a two-dimensional representation of the membrane, where the individual lipid and sterol molecules are described by point-like particles. The effective intermolecular interactions used in the model are systematic… ▽ More We construct a coarse-grained (CG) model for dipalmitoylphosphatidylcholine (DPPC)/cholesterol bilayers and apply it to large-scale simulation studies of lipid membranes. Our CG model is a two-dimensional representation of the membrane, where the individual lipid and sterol molecules are described by point-like particles. The effective intermolecular interactions used in the model are systematically derived from detailed atomic-scale molecular dynamics simulations using the Inverse Monte Carlo technique, which guarantees that the radial distribution properties of the CG model are consistent with those given by the corresponding atomistic system. We find that the coarse-grained model for the DPPC/cholesterol bilayer is substantially more efficient than atomistic models, providing a speed-up of approximately eight orders of magnitude. The results are in favor of formation of cholesterol-rich and cholesterol-poor domains at intermediate cholesterol concentrations, in agreement with the experimental phase diagram of the system. We also explore the limits of the novel coarse-grained model, and discuss the general validity and applicability of the present approach. △ Less

Submitted 30 June, 2004; originally announced June 2004.

Anomalously slow phase transitions in self-gravitating systems

Authors: I. Ispolatov, M. Karttunen

Abstract: Kinetics of collapse and explosion transitions in microcanonical self-gravitating ensembles is analyzed. A system of point particles interacting via an attractive soft Coulomb potential and confined to a spherical container is considered. We observed that for 100--200 particles collapse takes $10^3$ -- $10^4$ particle crossing times to complete, i. e., it is by 2-3 orders of magnitude slower tha… ▽ More Kinetics of collapse and explosion transitions in microcanonical self-gravitating ensembles is analyzed. A system of point particles interacting via an attractive soft Coulomb potential and confined to a spherical container is considered. We observed that for 100--200 particles collapse takes $10^3$ -- $10^4$ particle crossing times to complete, i. e., it is by 2-3 orders of magnitude slower than velocity relaxation. In addition, it is found that the collapse time decreases rapidly with the increase of the softcore radius. We found that such an anomalously long collapse time is caused by the slow energy exchange between a higher-temperature compact core and relatively cold diluted halo. The rate of energy exchange between the faster modes of the core particles and slower-moving particles of the halo is exponentially small in the ratio of the frequencies of these modes. As the softcore radius increases, and the typical core modes become slower, the ratio of core and halo frequencies decreases and the collapse accelerates. Implications to astrophysical systems and phase transition kinetics are discussed. △ Less

Submitted 2 March, 2004; originally announced March 2004.

Comments: 6 pages, 5 figures

Journal ref: Phys.Rev. E70 (2004) 026102

Nonlinear alternating current responses of dipolar fluids

Authors: J. P. Huang, K. W. Yu, Mikko Karttunen

Abstract: The frequency-dependent nonlinear dielectric increment of dipolar fluids in nonpolar fluids is often measured by using a stationary relaxation method in which two electric fields are used: The static direct current (DC) field of high strength causing the dielectric nonlinearity, and the probing alternating current (AC) field of low strength and high frequency. When a nonlinear composite is subje… ▽ More The frequency-dependent nonlinear dielectric increment of dipolar fluids in nonpolar fluids is often measured by using a stationary relaxation method in which two electric fields are used: The static direct current (DC) field of high strength causing the dielectric nonlinearity, and the probing alternating current (AC) field of low strength and high frequency. When a nonlinear composite is subjected to a sinusoidal electric field, the electric response in the composite will, in general, consist of AC fields at frequencies of higher-order harmonics. Based on the Froehlich model, we present a theory to investigate nonlinear AC responses of dipolar fluids containing both polarizable monomers and dimers. In the case of monomers only, our theory reproduces the known results. We obtain the fundamental, second-, and third-order harmonics of the Froehlich field by performing a perturbation expansion. The even-order harmonics are induced by the coupling between the AC and DC fields although the system under consideration has a cubic nonlinearity only. The harmonics of the Froehlich field can be affected by the field frequency, temperature, dispersion strength and the characteristic frequency of the dipolar fluid, as well as the dielectric constant of the nonpolar fluid. The results are found to be in agreement with recent experimental observations. △ Less

Submitted 29 February, 2004; originally announced March 2004.

Journal ref: Phys. Rev. E 70, 011403 (2004)

Lessons of Slicing Membranes: Interplay of Packing, Free Area, and Lateral Diffusion in Phospholipid/Cholesterol Bilayers

Authors: Emma Falck, Michael Patra, Mikko Karttunen, Marja T. Hyvonen, Ilpo Vattulainen

Abstract: We employ 100 ns molecular dynamics simulations to study the influence of cholesterol on structural and dynamic properties of dipalmitoylphosphatidylcholine (DPPC) bilayers in the fluid phase. The effects of the cholesterol content on the bilayer structure are considered by varying the cholesterol concentration between 0 and 50%. We concentrate on the free area in the membrane and investigate qu… ▽ More We employ 100 ns molecular dynamics simulations to study the influence of cholesterol on structural and dynamic properties of dipalmitoylphosphatidylcholine (DPPC) bilayers in the fluid phase. The effects of the cholesterol content on the bilayer structure are considered by varying the cholesterol concentration between 0 and 50%. We concentrate on the free area in the membrane and investigate quantities that are likely to be affected by changes in the free area and free volume properties. It is found that cholesterol has a strong impact on the free area properties of the bilayer. The changes in the amount of free area are shown to be intimately related to alterations in molecular packing, ordering of phospholipid tails, and compressibility. Further, the behavior of the lateral diffusion of both DPPC and cholesterol molecules with an increasing amount of cholesterol can in part be understood in terms of free area. Summarizing, our results highlight the central role of free area in comprehending the structural and dynamic properties of membranes containing cholesterol. △ Less

Submitted 10 February, 2004; originally announced February 2004.