Showing 1–19 of 19 results for author: Karna, P

Unveiling Phonon Contributions to Thermal Transport and the Failure of the Wiedemann-Franz Law in Ruthenium and Tungsten Thin Films

Authors: Md. Rafiqul Islam, Pravin Karna, Niraj Bhatt, Sandip Thakur, Helge Heinrich, Daniel M. Hirt, Saman Zare, Christopher Jezewski, Rinus T. P. Lee, Kandabara Tapily, John T. Gaskins, Colin D. Landon, Sean W. King, Ashutosh Giri, Patrick E. Hopkins

Abstract: Thermal transport in nanoscale interconnects is dominated by intricate electron-phonon interactions and microstructural influences. As copper faces limitations at the nanoscale, tungsten and ruthenium have emerged as promising alternatives due to their substantial phonon contributions to thermal conductivity. Metals with stronger phonon-mediated thermal transport are particularly advantageous in n… ▽ More Thermal transport in nanoscale interconnects is dominated by intricate electron-phonon interactions and microstructural influences. As copper faces limitations at the nanoscale, tungsten and ruthenium have emerged as promising alternatives due to their substantial phonon contributions to thermal conductivity. Metals with stronger phonon-mediated thermal transport are particularly advantageous in nanoscale architectures, where phonons are less sensitive to size effects than electrons. Here, we show that phonons play a comparable role to electrons in the thermal transport of ruthenium and tungsten thin films, evidenced by deviations from the classical Wiedemann-Franz law. Elevated Lorenz numbers-1.9 and 2.7 times the Sommerfeld value for ruthenium and tungsten, respectively-indicate phonon contributions of 45% and 62% to total thermal conductivity. Comparisons of in-plane thermal conductivity from steady-state thermoreflectance and electron relaxation times from infrared ellipsometry reveal that phonon-mediated transport is insensitive to microstructural variations and scaling. Ultrafast infrared pump-probe measurements show that ruthenium exhibits a higher electron-phonon coupling factor than tungsten, consistent with the differing contributions of carriers to thermal transport. Molecular dynamics simulations and spectral energy density analysis confirm substantial phonon-driven thermal transport and mode-dependent phonon lifetimes. These results offer insights into phonon-driven thermal transport and provide design principles for selecting interconnects with enhanced thermal management. △ Less

Submitted 12 May, 2025; originally announced May 2025.

Hydrothermal Synthesis of Carbon and Sulfur Mono-Doped Sodium Tantalates

Authors: S. Karna, C. Saunders, R. Karna, D. Guragain, S. Mishra, P. Karna

Abstract: A set of experiments was conducted to synthesize doped and undoped sodium tantalates with carbon and sulfur in energy efficient single-step hydrothermal process. Undoped sodium tantalate nanocubes were synthesized at 140$^\circ$C and doped one at 180$^\circ$C for 12 hours in rich alkaline atmosphere. The sizes of undoped, carbon-doped, and sulfur-doped sodium tantalate nanocubes were 38 nm, 45 nm,… ▽ More A set of experiments was conducted to synthesize doped and undoped sodium tantalates with carbon and sulfur in energy efficient single-step hydrothermal process. Undoped sodium tantalate nanocubes were synthesized at 140$^\circ$C and doped one at 180$^\circ$C for 12 hours in rich alkaline atmosphere. The sizes of undoped, carbon-doped, and sulfur-doped sodium tantalate nanocubes were 38 nm, 45 nm, and 40 nm, respectively. The morphological, elemental, compositional, structural, thermal, and photophysical properties of as-synthesized doped and undoped sodium tantalate (NaTaO$_3$) were characterized using scanning electron microscope (SEM), energy dispersive x-ray spectroscope (EDS), Raman spectroscopy, X-ray powder diffraction (XRD), thermal gravimetric analysis (TGA), Fourier transform infrared spectrophotometer (FTIR), and UV-vis spectrophotometer. The sulfur doped NaTaO$_3$ shows a higher photocatalytic activity in degradation of methylene blue than carbon doped and the undoped NaTaO$_3$. The band gaps of undoped NaTaO$_3$, carbon doped c-NaTaO$_3$, and sulfur doped s-NaTaO$_3$ were calculated to be 3.94 eV, 3.8 eV, and 3.52 eV, respectively using Tauc plot. △ Less

Submitted 21 March, 2021; originally announced March 2021.

Journal ref: PeerJ Materials Science 2:e10 (2020)

Hydrothermal Synthesis of Carbon Nanospheres

Authors: Priya Karna, Sunil Karna

Abstract: The experiment was conducted to synthesize carbon nanospheres of different sizes by controlling the temperature in polycondensation reaction of glucose under hydrothermal process. The surface morphology, structural, optical, and thermal properties of as synthesized particles were characterized using TEM, SEM, XRD, Raman spectroscopy, TGA, and DSC. The particles morphology and dispersity were modif… ▽ More The experiment was conducted to synthesize carbon nanospheres of different sizes by controlling the temperature in polycondensation reaction of glucose under hydrothermal process. The surface morphology, structural, optical, and thermal properties of as synthesized particles were characterized using TEM, SEM, XRD, Raman spectroscopy, TGA, and DSC. The particles morphology and dispersity were modified and reduced their size after calcination at $500^{o} C$ in comparison to those without calcinated. Thermal study also indicates particles change their phase from amorphous to crystalline and achieve thermal stability after $520^{o}C$, which can also be verified by presence of D-band and G-band in Raman spectrum. Overall results indicate that the carbon nanospheres are hard solids and highly dispersed with size ranges from 50 nm to 300 nm. △ Less

Submitted 18 June, 2017; v1 submitted 20 January, 2017; originally announced January 2017.

Comments: incomplete

Carbon Phosphide Monolayer with Superior Carrier Mobility

Authors: Gaoxue Wang, Ravindra Pandey, Shashi P. Karna

Abstract: Two dimensional (2D) materials with a finite band gap and high carrier mobility are sought after materials from both fundamental and technological perspectives. In this paper, we present the results based on the particle swarm optimization method and density functional theory which predict three geometrically different phases of carbon phosphide (CP) monolayer consisted of sp2 hybridized C atoms a… ▽ More Two dimensional (2D) materials with a finite band gap and high carrier mobility are sought after materials from both fundamental and technological perspectives. In this paper, we present the results based on the particle swarm optimization method and density functional theory which predict three geometrically different phases of carbon phosphide (CP) monolayer consisted of sp2 hybridized C atoms and sp3 hybridized P atoms in hexagonal networks. Two of the phases, referred to as α-CP and \b{eta}-CP with puckered and buckled surfaces, respectively are semiconducting with highly anisotropic electronic and mechanical properties. More remarkably, they have lightest electrons and holes among the known 2D semiconductors, yielding superior carrier mobility. The γ-CP has a distorted hexagonal network and exhibits a semi-metallic behavior with Dirac cones. These theoretical findings suggest the binary CP monolayer to be yet unexplored 2D materials holding great promises for applications in high-performance electronics and optoelectronics. △ Less

Submitted 29 January, 2016; originally announced January 2016.

Journal ref: Nanoscale 2016

Degradation of Phosphorene in Air: Understanding at Atomic Level

Authors: Gaoxue Wang, William J. Slough, Ravindra Pandey, Shashi P. Karna

Abstract: Phosphorene is a promising two dimensional (2D) material with a direct band gap, high carrier mobility, and anisotropic electronic properties. Phosphorene-based electronic devices, however, are found to degrade upon exposure to air. In this paper, we provide an atomic level understanding of stability of phosphorene in terms of its interaction with O2 and H2O. The results based on density functiona… ▽ More Phosphorene is a promising two dimensional (2D) material with a direct band gap, high carrier mobility, and anisotropic electronic properties. Phosphorene-based electronic devices, however, are found to degrade upon exposure to air. In this paper, we provide an atomic level understanding of stability of phosphorene in terms of its interaction with O2 and H2O. The results based on density functional theory together with first principles molecular dynamics calculations show that O2 could spontaneously dissociate on phosphorene at room temperature. H2O will not strongly interact with pristine phosphorene, however, an exothermic reaction could occur if phosphorene is first oxidized. The pathway of oxidation first followed by exothermic reaction with water is the most likely route for the chemical degradation of the phosphorene-based devices in air. △ Less

Submitted 2 September, 2015; v1 submitted 29 August, 2015; originally announced August 2015.

Journal ref: 2D Mater. 3 (2016) 025011

Out-of-plane structural flexibility of phosphorene

Authors: Gaoxue Wang, G. C. Loh, Ravindra Pandey, Shashi P. Karna

Abstract: Phosphorene has been rediscovered recently, establishing itself as one of the most promising two dimensional group-V elemental monolayers with direct band gap, high carrier mobility, and anisotropic electronic properties. In this letter, the buckling and its effect on the electronic properties in phosphorene are investigated by using molecular dynamics simulations and complemented by density funct… ▽ More Phosphorene has been rediscovered recently, establishing itself as one of the most promising two dimensional group-V elemental monolayers with direct band gap, high carrier mobility, and anisotropic electronic properties. In this letter, the buckling and its effect on the electronic properties in phosphorene are investigated by using molecular dynamics simulations and complemented by density functional theory calculations. We find that phosphorene shows superior out-of-plane structural flexibility along the armchair direction, which allows the formation of buckling with large curvatures, while the buckling along the zigzag direction will break its structure integrity at large curvatures. The semiconducting and direct band gap nature are retained with buckling along the armchair direction; the band gap decreases and transforms to an indirect band gap with buckling along the zigzag direction. The structural flexibility and electronic robustness along the armchair direction facilitate the fabrication of devices with complex shapes, such as folded phosphorene and phosphorene nano-scrolls, thereby offering new possibilities for the application of phosphorene in flexible electronics and optoelectronics. △ Less

Submitted 6 September, 2015; v1 submitted 23 August, 2015; originally announced August 2015.

Effects of extrinsic point defects in phosphorene: B, C, N, O and F Adatoms

Authors: Gaoxue Wang, Ravindra Pandey, Shashi P. Karna

Abstract: Phosphorene is emerging as a promising 2D semiconducting material with a direct band gap and high carrier mobility. In this paper, we examine the role of the extrinsic point defects including surface adatoms in modifying the electronic properties of phosphorene using density functional theory. The surface adatoms considered are B, C, N, O and F with a [He] core electronic configuration. Our calcul… ▽ More Phosphorene is emerging as a promising 2D semiconducting material with a direct band gap and high carrier mobility. In this paper, we examine the role of the extrinsic point defects including surface adatoms in modifying the electronic properties of phosphorene using density functional theory. The surface adatoms considered are B, C, N, O and F with a [He] core electronic configuration. Our calculations show that B and C, with electronegativity close to P, prefer to break the sp3 bonds of phosphorene, and reside at the interstitial sites in the 2D lattice by forming sp2 bonds with the native atoms. On the other hand, N, O and F, which are more electronegative than P, prefer the surface sites by attracting the lone pairs of phosphorene. B, N and F adsorption will also introduce local magnetic moment to the lattice. Moreover, B, C, N and F adatoms will modify the band gap of phosphorene yielding metallic transverse tunneling characters. Oxygen does not modify the band gap of phosphorene, and a diode like tunneling behavior is observed. Our results therefore offer a possible route to tailor the electronic and magnetic properties of phosphorene by the adatom functionalization, and provide the physical insights of the environmental sensitivity of phosphorene, which will be helpful to experimentalists in evaluating the performance and aging effects of phosphorene-based electronic devices. △ Less

Submitted 17 April, 2015; v1 submitted 13 March, 2015; originally announced March 2015.

Atomically thin group-V elemental films: theoretical investigations of antimonene allotropes

Authors: Gaoxue Wang, Ravindra Pandey, Shashi P. Karna

Abstract: Group-V elemental monolayers including phosphorene are emerging as promising 2D materials with semiconducting electronic properties. Here, we present the results of first principles calculations on stability, mechanical and electronic properties of 2D antimony (Sb), antimonene. Our calculations show that free-standing α and \b{eta} allotropes of antimonene are stable and semiconducting. The α-Sb h… ▽ More Group-V elemental monolayers including phosphorene are emerging as promising 2D materials with semiconducting electronic properties. Here, we present the results of first principles calculations on stability, mechanical and electronic properties of 2D antimony (Sb), antimonene. Our calculations show that free-standing α and \b{eta} allotropes of antimonene are stable and semiconducting. The α-Sb has a puckered structure with two atomic sub-layers and \b{eta}-Sb has a buckled hexagonal lattice. The calculated Raman spectra and STM images have distinct features thus facilitating characterization of both allotropes. The \b{eta}-Sb has nearly isotropic mechanical properties while α-Sb shows strongly anisotropic characteristics. An indirect-direct band gap transition is expected with moderate tensile strains applied to the monolayers, which opens up the possibility of their applications in optoelectronics. △ Less

Submitted 9 May, 2015; v1 submitted 9 March, 2015; originally announced March 2015.

Journal ref: ACS Appl. Mater. Interfaces, 2015

Novel 2D Silica Monolayers with Tetrahedral and Octahedral Configurations

Authors: Gaoxue Wang, G. C. Loh, Ravindra Pandey, Shashi P. Karna

Abstract: Free-standing and well-ordered two-dimensional (2D) silica monolayers with tetrahedral (T-silica) and octahedral (O-silica) building blocks are found to be stable by first principles calculations; T-silica is formed by corner-sharing SiO4 tetrahedrons in a rectangular network and O-silica consists of edge-sharing SiO6 octahedrons. Moreover, the insulating O-silica is the strongest silica monolayer… ▽ More Free-standing and well-ordered two-dimensional (2D) silica monolayers with tetrahedral (T-silica) and octahedral (O-silica) building blocks are found to be stable by first principles calculations; T-silica is formed by corner-sharing SiO4 tetrahedrons in a rectangular network and O-silica consists of edge-sharing SiO6 octahedrons. Moreover, the insulating O-silica is the strongest silica monolayer, and can therefore act as a supporting substrate for nanostructures in sensing and catalytic applications. Nanoribbons of T-silica are metallic while those of O-silica have band gaps regardless of the chirality. We find the interaction of O-silica with graphene to be weak suggesting the possibility of its use as a monolayer dielectric material for graphene-based devices. Considering that the six-fold coordinated silica exists at high pressure in the bulk phase, the prediction of a small energy difference of O-silica with the synthesized silica bilayer together with the thermal stability at 1000 K suggest that synthesis of O-silica can be achieved in experiments. △ Less

Submitted 7 January, 2015; originally announced January 2015.

Journal ref: J. Phys. Chem. C, 2015

Phosphorene Oxide: Stability and electronic properties of a novel 2D material

Authors: Gaoxue Wang, Ravindra Pandey, Shashi P. Karna

Abstract: Phosphorene, the monolayer form of the (black) phosphorus, was recently exfoliated from its bulk counterpart. Phosphorene oxide, by analogy to graphene oxide, is expected to have novel chemical and electronic properties, and may provide an alternative route to synthesis of phosphorene. In this letter, we investigate physical and chemical properties of the phosphorene oxide including its formation… ▽ More Phosphorene, the monolayer form of the (black) phosphorus, was recently exfoliated from its bulk counterpart. Phosphorene oxide, by analogy to graphene oxide, is expected to have novel chemical and electronic properties, and may provide an alternative route to synthesis of phosphorene. In this letter, we investigate physical and chemical properties of the phosphorene oxide including its formation by the oxygen adsorption on the bare phosphorene. Analysis of the phonon dispersion curves finds stoichiometric and non-stoichiometric oxide configurations to be stable at ambient conditions, thus suggesting that the oxygen absorption may not degrade the phosphorene. The nature of the band gap of the oxides depends on the degree of the functionalization of phosphorene; indirect gap is predicted for the non-stoichiometric configurations whereas a direct gap is predicted for the stoichiometric oxide. Application of the mechanical strain and external electric field leads to tunability of the band gap of the phosphorene oxide. In contrast to the case of the bare phosphorene, dependence of the diode-like asymmetric current-voltage response on the degree of stoichiometry is predicted for the phosphorene oxide. △ Less

Submitted 1 November, 2014; v1 submitted 1 September, 2014; originally announced September 2014.

Stacking and electric field effects on the electronic properties of the layered GaN

Authors: Dongwei Xu, Haiying He, Ravindra Pandey, Shashi P. Karna

Abstract: Stability and electronic properties of atomic layers of GaN are investigated in the framework of the van der Waals-density functional theory. We find that the ground state of the layered GaN is a planar graphene-like configuration rather than a buckled bulk-like configuration. Application of an external perpendicular electric field to the layered GaN induces distinct stacking-dependent features of… ▽ More Stability and electronic properties of atomic layers of GaN are investigated in the framework of the van der Waals-density functional theory. We find that the ground state of the layered GaN is a planar graphene-like configuration rather than a buckled bulk-like configuration. Application of an external perpendicular electric field to the layered GaN induces distinct stacking-dependent features of the tunability of the band gap; the band gap of the monolayer does not change whereas that of the trilayer GaN is significantly reduced for the applied field of 0.4 V/ Å. It is suggested that such a stacking-dependent tunability of the band gap in the presence of an applied field may lead to novel applications of the devices based on the layered GaN. △ Less

Submitted 20 February, 2013; originally announced February 2013.

Effect of Electric Field on the Band Structure of Graphene/BN and BN/BN Bilayers

Authors: Radhakrishnan Balu, Xiaoliang Zhong, Ravindra Pandey, Shashi P. Karna

Abstract: Effect of electric field on the band structures of graphene/BN and BN/BN bilayers is investigated within the framework of density functional theory. A relatively large degree of modulation is predicted for the graphene/BN bilayer. The calculated band gap of the graphene/BN bilayer increases with applied electric field, which is not the case of BN/BN bilayer; its band gap decreases with the applied… ▽ More Effect of electric field on the band structures of graphene/BN and BN/BN bilayers is investigated within the framework of density functional theory. A relatively large degree of modulation is predicted for the graphene/BN bilayer. The calculated band gap of the graphene/BN bilayer increases with applied electric field, which is not the case of BN/BN bilayer; its band gap decreases with the applied field. Both features in the bilayers considered appear to be related to the nature of the conduction band and the redistribution of the electronic charge of the bilayer systems under the influence of electric field △ Less

Submitted 8 August, 2011; originally announced August 2011.

Theoretical Study of Physisorption of Nucleobases on Boron Nitride Nanotubes: A New Class of Hybrid Nano-Bio Materials

Authors: Saikat Mukhopadhyay, S. Gowtham, Ralph H. Scheicher, Ravindra Pandey, Shashi P. Karna

Abstract: We investigate the adsorption of the nucleic acid bases, adenine (A), guanine (G), cytosine (C), thymine (T) and uracil (U) on the outer wall of a high curvature semiconducting single-walled boron nitride nanotube (BNNT) by first principles density functional theory calculations. The calculated binding energy shows the order: G>A\approxC\approxT\approxU implying that the interaction strength of… ▽ More We investigate the adsorption of the nucleic acid bases, adenine (A), guanine (G), cytosine (C), thymine (T) and uracil (U) on the outer wall of a high curvature semiconducting single-walled boron nitride nanotube (BNNT) by first principles density functional theory calculations. The calculated binding energy shows the order: G>A\approxC\approxT\approxU implying that the interaction strength of the (high-curvature) BNNT with the nucleobases, G being an exception, is nearly the same. A higher binding energy for the G-BNNT conjugate appears to result from a stronger hybridization of the molecular orbitals of G and BNNT, since the charge transfer involved in the physisorption process is insignificant. A smaller energy gap predicted for the G-BNNT conjugate relative to that of the pristine BNNT may be useful in application of this class of biofunctional materials to the design of the next generation sensing devices. △ Less

Submitted 8 March, 2010; v1 submitted 30 November, 2009; originally announced November 2009.

Comments: 17 pages 6 figures

Report number: Vol 21, starting page : 165703

Journal ref: Nanotechnol. 21:165703, 2010

Electronic conduction in a three-terminal molecular transistor

Authors: Haiying He, Ravindra Pandey, Shashi P. Karna

Abstract: The electronic conduction of a novel, three-terminal molecular architecture, analogous to a heterojunction bipolar transistor is studied. In this architecture, two diode arms consisting of donor-acceptor molecular wires fuse through a ring, while a gate modulating wire is a π-conjugated wire. The calculated results show the enhancement or depletion mode of a transistor by applying a gate field a… ▽ More The electronic conduction of a novel, three-terminal molecular architecture, analogous to a heterojunction bipolar transistor is studied. In this architecture, two diode arms consisting of donor-acceptor molecular wires fuse through a ring, while a gate modulating wire is a π-conjugated wire. The calculated results show the enhancement or depletion mode of a transistor by applying a gate field along the positive or negative direction. A small gate field is required to switch on the current in the proposed architecture. The changes in the electronic conduction can be attributed to the intrinsic dipolar molecular architecture in terms of the evolution of molecular wavefunctions, specifically the one associated with the terphenyl group of the modulating wire in the presence of the gate field. △ Less

Submitted 22 September, 2008; originally announced September 2008.

Comments: 13 pages, 5 figures

Asymmetric currents in a donor (D)-bridge (B)-acceptor (A) single molecule - revisit of the Aviram-Ratner diode

Authors: Haiying He, Ravindra Pandey, Govind Mallick, Shashi P. Karna

Abstract: The quantum transport via a donor (D)-bridge (B)-acceptor (A) single molecule is studied using density functional theory in conjunction with the Landauer-Büttiker formalism. Asymmetric electrical response for opposite biases is observed resulting in significant rectification in current. The intrinsic dipole moment induced by substituent side groups in the molecule leads to enhanced/reduced polar… ▽ More The quantum transport via a donor (D)-bridge (B)-acceptor (A) single molecule is studied using density functional theory in conjunction with the Landauer-Büttiker formalism. Asymmetric electrical response for opposite biases is observed resulting in significant rectification in current. The intrinsic dipole moment induced by substituent side groups in the molecule leads to enhanced/reduced polarization of the system under a forward/reverse applied potential, thus asymmetry in the charge distribution and the electronic current under bias. Under a forward bias, the energy gap between the D and A frontier orbitals closes and the current increases rapidly; whereas under a reverse bias, the D-A gap widens and the current remains small. △ Less

Submitted 19 September, 2008; originally announced September 2008.

Comments: 15 pages, 6 figures

First-principles Study of Physisorption of Nucleic Acid Bases on Small-Diameter Carbon Nanotube

Authors: S. Gowtham, Ralph H. Scheicher, Ravindra Pandey, Shashi P. Karna, Rajeev Ahuja

Abstract: We report the results of our first-principles study based on density functional theory on the interaction of the nucleic acid base molecules adenine (A), cytosine (C), guanine (G), thymine (T), and uracil (U), with a single-walled carbon nanotube (CNT). Specifically, the focus is on the physisorption of base molecules on the outer wall of a (5,0) metallic CNT possessing one of the smallest diame… ▽ More We report the results of our first-principles study based on density functional theory on the interaction of the nucleic acid base molecules adenine (A), cytosine (C), guanine (G), thymine (T), and uracil (U), with a single-walled carbon nanotube (CNT). Specifically, the focus is on the physisorption of base molecules on the outer wall of a (5,0) metallic CNT possessing one of the smallest diameters possible. Compared to CNTs with large diameters, the physisorption energy is found to be reduced in the high-curvature case. The base molecules exhibit significantly different interaction strengths, and the calculated binding energies follow the hierarchy G > A > T > C > U, which appears to be independent of the tube curvature. The stabilizing factor in the interaction between the base molecule and CNT is dominated by the molecular polarizability that allows a weakly attractive dispersion force to be induced between them. The present study provides an improved understanding of the role of the base sequence in deoxyribonucleic acid (DNA) or ribonucleic acid (RNA) on their interactions with carbon nanotubes of varying diameters. △ Less

Submitted 14 September, 2007; originally announced September 2007.

Comments: 17 pages, 6 figures

Journal ref: Nanotechnology 19, 125701 (2008)

Functionalized nanopore-embedded electrodes for rapid DNA sequencing

Authors: Haiying He, Ralph H. Scheicher, Ravindra Pandey, Alexandre Reily Rocha, Stefano Sanvito, Anton Grigoriev, Rajeev Ahuja, Shashi P. Karna

Abstract: The determination of a patient's DNA sequence can, in principle, reveal an increased risk to fall ill with particular diseases [1,2] and help to design "personalized medicine" [3]. Moreover, statistical studies and comparison of genomes [4] of a large number of individuals are crucial for the analysis of mutations [5] and hereditary diseases, paving the way to preventive medicine [6]. DNA sequen… ▽ More The determination of a patient's DNA sequence can, in principle, reveal an increased risk to fall ill with particular diseases [1,2] and help to design "personalized medicine" [3]. Moreover, statistical studies and comparison of genomes [4] of a large number of individuals are crucial for the analysis of mutations [5] and hereditary diseases, paving the way to preventive medicine [6]. DNA sequencing is, however, currently still a vastly time-consuming and very expensive task [4], consisting of pre-processing steps, the actual sequencing using the Sanger method, and post-processing in the form of data analysis [7]. Here we propose a new approach that relies on functionalized nanopore-embedded electrodes to achieve an unambiguous distinction of the four nucleic acid bases in the DNA sequencing process. This represents a significant improvement over previously studied designs [8,9] which cannot reliably distinguish all four bases of DNA. The transport properties of the setup investigated by us, employing state-of-the-art density functional theory together with the non-equilibrium Green's Function method, leads to current responses that differ by at least one order of magnitude for different bases and can thus provide a much more robust read-out of the base sequence. The implementation of our proposed setup could thus lead to a viable protocol for rapid DNA sequencing with significant consequences for the future of genome related research in particular and health care in general. △ Less

Submitted 29 August, 2007; originally announced August 2007.

Comments: 12 pages, 5 figures

Journal ref: J. Phys. Chem. C, 112 (10), 3456 -3459, 2008.

Physisorption of Nucleobases on Graphene

Authors: S. Gowtham, Ralph H. Scheicher, Rajeev Ahuja, Ravindra Pandey, Shashi P. Karna

Abstract: We report the results of our first-principles investigation on the interaction of the nucleobases adenine (A), cytosine (C), guanine (G), thymine (T), and uracil (U) with graphene, carried out within the density functional theory framework, with additional calculations utilizing Hartree--Fock plus second-order Moeller-Plesset perturbation theory. The calculated binding energy of the nucleobases… ▽ More We report the results of our first-principles investigation on the interaction of the nucleobases adenine (A), cytosine (C), guanine (G), thymine (T), and uracil (U) with graphene, carried out within the density functional theory framework, with additional calculations utilizing Hartree--Fock plus second-order Moeller-Plesset perturbation theory. The calculated binding energy of the nucleobases shows the following hierarchy: G > T ~ C ~ A > U, with the equilibrium configuration being very similar for all five of them. Our results clearly demonstrate that the nucleobases exhibit significantly different interaction strengths when physisorbed on graphene. The stabilizing factor in the interaction between the base molecule and graphene sheet is dominated by the molecular polarizability that allows a weakly attractive dispersion force to be induced between them. The present study represents a significant step towards a first-principles understanding of how the base sequence of DNA can affect its interaction with carbon nanotubes, as observed experimentally. △ Less

Submitted 11 April, 2007; originally announced April 2007.

Comments: 7 pages, 3 figures

Journal ref: Phys. Rev. B 76, 033401 (2007)

Dipole moments from atomic-number-dependent potentials in analytic density-functional theory

Authors: Brett I. Dunlap, Shashi P. Karna, Rajendra R. Zope, ;

Abstract: Molecular dipole moments of analytic density-functional theory are investigated. The effect of element-dependent exchange potentials on these moments are examined by comparison with conventional quantum-chemical methods and experiment for the subset of the extended G2 set of molecules that have nonzero dipole moment. Fitting the Kohn-Sham [Phys. Rev. 140, A1133 (1965)] potential itself makes a m… ▽ More Molecular dipole moments of analytic density-functional theory are investigated. The effect of element-dependent exchange potentials on these moments are examined by comparison with conventional quantum-chemical methods and experiment for the subset of the extended G2 set of molecules that have nonzero dipole moment. Fitting the Kohn-Sham [Phys. Rev. 140, A1133 (1965)] potential itself makes a mean absolute error of less than 0.1 Debye. Variation of alpha (Slater's [Phys. Rev. 81, 385 (1951)] exchange parameter) values has far less effect on dipole moments than on energies. It is argued that in variable alpha methods one should choose the smaller of the two rather than the geometric mean of the two alpha values for the heteroatomic part of the linear-combination-atomic-orbital density. Calculations on the dipole moment of NH2(CH)24NO2 are consistent with earlier calculations and show that varying the differences between alpha values for atoms with different atomic numbers has only short-ranged electrostatic effects. △ Less

Submitted 12 December, 2006; originally announced December 2006.

Comments: JCP (in press)