-
Prediction of shear-thickening of particle suspensions in viscoelastic fluids by direct numerical simulation
Authors:
Yuki Matsuoka,
Yasuya Nakayama,
Toshihisa Kajiwara
Abstract:
To elucidate the key factor for the quantitative prediction of the shear-thickening in suspensions in viscoelastic fluids, direct numerical simulations of many-particle suspensions in a multi-mode Oldroyd-B fluid are performed using the smoothed profile method. Suspension flow under simple shear flow is solved under periodic boundary conditions by using Lees--Edwards boundary conditions for partic…
▽ More
To elucidate the key factor for the quantitative prediction of the shear-thickening in suspensions in viscoelastic fluids, direct numerical simulations of many-particle suspensions in a multi-mode Oldroyd-B fluid are performed using the smoothed profile method. Suspension flow under simple shear flow is solved under periodic boundary conditions by using Lees--Edwards boundary conditions for particle dynamics and a time-dependent oblique coordinate system that evolves with mean shear flow for fluid dynamics. Semi-dilute many-particle suspensions up to a particle volume fraction of 0.1 are investigated. The presented numerical results regarding the bulk rheological properties of the shear-thickening behavior agree quantitatively with recent experimental results of semi-dilute suspensions in a Boger fluid. The presented result clarifies that an accurate estimation of the first normal stress difference of the matrix in the shear-rate range where the shear-thickening starts to occur is crucial for the quantitative prediction of the suspension shear-thickening in a Boger fluid matrix at around the Weissenberg number $\rm{Wi}=1$ by an Oldroyd-B model. Additionally, the effect of suspension microstructures on the suspension viscosity is examined. The paper concludes with a discussion on how the flow pattern and the elastic stress development change with the volume fraction and Weissenberg number.
△ Less
Submitted 16 September, 2021;
originally announced September 2021.
-
Effects of viscoelasticity on shear-thickening in dilute suspensions in a viscoelastic fluid
Authors:
Yuki Matsuoka,
Yasuya Nakayama,
Toshihisa Kajiwara
Abstract:
We investigate previously unclarified effects of fluid elasticity on shear-thickening in dilute suspensions in an Oldroyd-B viscoelastic fluid using a novel direct numerical simulation based on the smoothed profile method. Fluid elasticity is determined by the Weissenberg number Wi and by viscosity ratio $1-β=η_p/(η_s+η_p)$ which measures the coupling between the polymer stress and flow: $η_p$ and…
▽ More
We investigate previously unclarified effects of fluid elasticity on shear-thickening in dilute suspensions in an Oldroyd-B viscoelastic fluid using a novel direct numerical simulation based on the smoothed profile method. Fluid elasticity is determined by the Weissenberg number Wi and by viscosity ratio $1-β=η_p/(η_s+η_p)$ which measures the coupling between the polymer stress and flow: $η_p$ and $η_s$ are the polymer and solvent viscosity, respectively.As $1-β$ increases, while the stresslet does not change significantly compared to that in the $β\to 1$ limit, the growth rate of the normalized polymer stress with Wi was suppressed.Analysis of flow and conformation dynamics around a particle for different $β$ reveals that at large $1-β$, polymer stress modulates flow, leading to suppression of polymer stretch.This effect of $β$ on polymer stress development indicates complex coupling between fluid elasticity and flow, and is essential to understand the rheology and hydrodynamic interactions in suspensions in viscoelastic media.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
Twisted bilayer graphene fabricated by direct bonding in a high vacuum
Authors:
Hitoshi Imamura,
Anton Visikovskiy,
Ryosuke Uotani,
Takashi Kajiwara,
Hiroshi Ando,
Takushi Iimori,
Kota Iwata,
Toshio Miyamachi,
Kan Nakatsuji,
Kazuhiko Mase,
Tetsuroh Shirasawa,
Fumio Komori,
Satoru Tanaka
Abstract:
Twisted bilayer graphene (TBG), in which two monolayer graphene are stacked with an in-plane rotation angle, has recently become a hot topic due to unique electronic structures. TBG is normally produced in air by the tear-and-stack method of mechanical exfoliation and transferring graphene flakes, by which a sizable, millimeter-order area, and importantly clean interface between layers are hard to…
▽ More
Twisted bilayer graphene (TBG), in which two monolayer graphene are stacked with an in-plane rotation angle, has recently become a hot topic due to unique electronic structures. TBG is normally produced in air by the tear-and-stack method of mechanical exfoliation and transferring graphene flakes, by which a sizable, millimeter-order area, and importantly clean interface between layers are hard to obtain. In this study, we resolved these problems by directly transferring the easy-to-exfoliate CVD-grown graphene on SiC substrate to graphene in a high vacuum without using any transfer assisting medium and observed electronic band modulations due to the strong interlayer coupling.
△ Less
Submitted 9 May, 2020; v1 submitted 4 May, 2020;
originally announced May 2020.
-
Computational study of heavy group IV elements (Ge, Sn, Pb) triangular lattice atomic layers on SiC(0001) surface
Authors:
Anton Visikovskiy,
Shingo Hayashi,
Takashi Kajiwara,
Fumio Komori,
Koichiro Yaji,
Satoru Tanaka
Abstract:
Group IV heavy elements atomic layers are expected to show an interesting physical properties due to their large spin-orbit coupling (SOC). Using density functional theory (DFT) calculations with/without SOC we investigate the variation of group IV heavy elements overlayers, namely dense triangular lattice atomic layers (TLAL) on the surface of SiC(0001) semiconductor. The possibility of such laye…
▽ More
Group IV heavy elements atomic layers are expected to show an interesting physical properties due to their large spin-orbit coupling (SOC). Using density functional theory (DFT) calculations with/without SOC we investigate the variation of group IV heavy elements overlayers, namely dense triangular lattice atomic layers (TLAL) on the surface of SiC(0001) semiconductor. The possibility of such layers formation and their properties have not been addressed before. Here we show, that these layers may indeed be stable and, owing to peculiar bonding configuration, exhibit robust Dirac-like energy bands originating from $p_x+p_y$ orbitals and localized mostly within the layer, and $p_z$ band localized outside the layer and interacting with SiC substrate. We found that a $T_1$ adsorption site is most favorable for such TLAL structure and this results in an unusual SOC-induced spin polarization of the states around $\bar{K}$ points of Brillouin zone, namely the coexistence of Rashba- and Zeeman-like spin polarization of different states. We explain this phenomena in terms of symmetry of partial electronic density rather than symmetry of atomic structure.
△ Less
Submitted 4 September, 2018;
originally announced September 2018.
-
Effects of pitched tips of novel kneading disks on melt mixing in twin-screw extrusion
Authors:
Yasuya Nakayama,
Nariyoshi Nishihira,
Toshihisa Kajiwara,
Hideki Tomiyama,
Takahide Takeuchi,
Koichi Kimura
Abstract:
In mixing highly viscous materials, like polymers, foods, and rubbers, the geometric structure of the mixing device is a determining factor for the quality of the mixing process. In pitched-tip kneading disks (ptKD), a novel type of mixing element, based on conventional kneading disks (KD), the tip angle is modified to change the channel geometry as well as the drag ability of KD. We discuss the e…
▽ More
In mixing highly viscous materials, like polymers, foods, and rubbers, the geometric structure of the mixing device is a determining factor for the quality of the mixing process. In pitched-tip kneading disks (ptKD), a novel type of mixing element, based on conventional kneading disks (KD), the tip angle is modified to change the channel geometry as well as the drag ability of KD. We discuss the effects of the tip angle in ptKD on mixing characteristics based on numerical simulation of the flow in the melt-mixing zone under different feed rates and a screw rotation speed. It turns out that the passage of fluid through the high-stress regions increases in ptKD compared to conventional KD regardless of the directions and sizes of the tip angle, while the fluctuation in residence time stays at the same level as the conventional KD. Furthermore, pitched tips of backward direction increase the mean applied stress on the fluid elements during its residence in the melt-mixing zone, suggesting the enhancement of dispersive mixing quality in ptKD. These understandings of the role of the tip angle on KD can give a basic guide in selecting and designing suitable angle parameters of ptKD for different mixing purposes.
△ Less
Submitted 23 December, 2016;
originally announced December 2016.
-
Quantifying hierarchical mixture quality in polymer composite materials: structure and inhomogeneity in multiple scales
Authors:
Yasuya Nakayama,
Toshihisa Kajiwara
Abstract:
Mixture quality plays a crucial role in the physical properties of multi-component immiscible polymer mixtures including nanocomposites and polymer blends. Such complex mixtures are often characterized by hierarchical internal structures, which have not been accounted for by conventional mixture quantifications. We propose a way to characterize the mixture quality of complex mixtures with hierarch…
▽ More
Mixture quality plays a crucial role in the physical properties of multi-component immiscible polymer mixtures including nanocomposites and polymer blends. Such complex mixtures are often characterized by hierarchical internal structures, which have not been accounted for by conventional mixture quantifications. We propose a way to characterize the mixture quality of complex mixtures with hierarchical structures. Starting from a concentration field, which can be typically obtained from TEM/SEM images, the distribution of the coarsegrained concentration is analyzed to obtain the scale-dependent inhomogeneity of a mixture. The hierarchical nature of a mixture is characterized by multiple characteristic scales of the scale-dependent inhomogeneity. We demonstrate how the proposed method works to characterize sizes and distributions in different dispersions. This method is generally applicable to various complex mixtures.
△ Less
Submitted 21 December, 2012;
originally announced December 2012.
-
Graphene nanoribbons on vicinal SiC surfaces by molecular beam epitaxy
Authors:
Takashi Kajiwara,
Yuzuru Nakamori,
Anton Visikovskiy,
Takushi Iimori,
Fumio Komori,
Kan Nakatsuji,
Kazuhiko Mase,
Satoru Tanaka
Abstract:
We present a new method of producing a densely ordered array of epitaxial graphene nanoribbons (GNRs) using vicinal SiC surfaces as a template, which consist of ordered pairs of (0001) terraces and nanofacets. Controlled selective growth of graphene on approximately 10 nm wide of (0001) terraces with 10 nm spatial intervals allows GNR formation. By selecting the vicinal direction of SiC substrate,…
▽ More
We present a new method of producing a densely ordered array of epitaxial graphene nanoribbons (GNRs) using vicinal SiC surfaces as a template, which consist of ordered pairs of (0001) terraces and nanofacets. Controlled selective growth of graphene on approximately 10 nm wide of (0001) terraces with 10 nm spatial intervals allows GNR formation. By selecting the vicinal direction of SiC substrate, [1-100], well-ordered GNRs with predominantly armchair edges are obtained. These structures, the high density GNRs, enable us to observe the electronic structure at K-points by angle-resolved photoemission spectroscopy, showing clear band-gap opening of at least 0.14 eV.
△ Less
Submitted 16 October, 2012;
originally announced October 2012.
-
Dynamic shear responses of polymer-polymer interfaces
Authors:
Yasuya Nakayama,
Kiyoyasu Kataoka,
Toshihisa Kajiwara
Abstract:
In multi-component soft matter, interface properties often play a key role in determining the properties of the overall system. The identification of the internal dynamic structures in non-equilibrium situations requires the interface rheology to be characterized. We have developed a method to quantify the rheological contribution of soft interfaces and evaluate the dynamic modulus of the interfac…
▽ More
In multi-component soft matter, interface properties often play a key role in determining the properties of the overall system. The identification of the internal dynamic structures in non-equilibrium situations requires the interface rheology to be characterized. We have developed a method to quantify the rheological contribution of soft interfaces and evaluate the dynamic modulus of the interface. This method reveals that the dynamic shear responses of interfaces in bilayer systems comprising polypropylene and three different polyethylenes can be classified as having hardening and softening effects on the overall system: a interface between linear long polymers becomes more elastic than the component polymers, while large polydispersity or long-chain-branching of one component make the interface more viscous. We find that the chain lengths and architectures of the component polymers, rather than equilibrium immiscibility, play an essential role in determining the interface rheological properties.
△ Less
Submitted 17 July, 2012; v1 submitted 13 July, 2012;
originally announced July 2012.
