-
Electrical Side-Gate Control of Anisotropic Magnetoresistance and Magnetic Anisotropy in a Composite Multiferroic
Authors:
Katherine Johnson,
Michael Newburger,
Michael Page,
Roland K. Kawakami
Abstract:
Composite multiferroics consisting of a ferroelectric material interfaced with a ferromagnetic material can function above room temperature and exhibit improved magnetoelectric (ME) coupling compared to single-phase multiferroic materials, making them desirable for applications in energy efficient electronic devices. In this study, we demonstrate electrical side-gate control of magnetoresistance a…
▽ More
Composite multiferroics consisting of a ferroelectric material interfaced with a ferromagnetic material can function above room temperature and exhibit improved magnetoelectric (ME) coupling compared to single-phase multiferroic materials, making them desirable for applications in energy efficient electronic devices. In this study, we demonstrate electrical side-gate control of magnetoresistance and magnetic anisotropy in single-crystalline ferromagnetic Fe$_{0.75}$Co$_{0.25}$ thin films grown on ferroelectric PMN-PT (001) substrates by molecular beam epitaxy. Fe$_{0.75}$Co$_{0.25}$ is selected due to its large magnetoelastic coupling and low magnetic damping. We find that the magnetoresistance curves of patterned Fe$_{0.75}$Co$_{0.25}$ films are controlled by voltages applied to electrostatic side gates. Angle-dependent magnetoresistance scans reveal that the origin of this effect is strain-mediated variation of the magnetic anisotropy due to piezoelectric effects in the PMN-PT. This electrical control of magnetic properties could serve as a building block for future magnetoelectronic and magnonic devices.
△ Less
Submitted 29 April, 2025;
originally announced April 2025.
-
A Decision Transformer Approach to Grain Boundary Network Optimization
Authors:
Christopher W. Adair,
Oliver K. Johnson
Abstract:
As microstructure property models improve, additional information from crystallographic degrees of freedom and grain boundary networks (GBNs) can be included in microstructure design problems. However, the high dimensional nature of including this information precludes the use of many common optimization approaches and requires less efficient methods to generate quality designs. Previous work demo…
▽ More
As microstructure property models improve, additional information from crystallographic degrees of freedom and grain boundary networks (GBNs) can be included in microstructure design problems. However, the high dimensional nature of including this information precludes the use of many common optimization approaches and requires less efficient methods to generate quality designs. Previous work demonstrated that human-in-the-loop optimization, instantiated as a video game, achieved high-quality, efficient solutions to these design problems. However, such data is expensive to obtain. In the present work, we show how a Decision Transformer machine learning (ML) model can be used to learn from the optimization trajectories generated by human players, and subsequently solve materials design problems. We compare the ML optimization trajectories against players and a common global optimization algorithm: simulated annealing (SA). We find that the ML model exhibits a validation accuracy of 84% against player decisions, and achieves solutions of comparable quality to SA (92%), but does so using three orders of magnitude fewer iterations. We find that the ML model generalizes in important and surprising ways, including the ability to train using a simple constitutive structure-property model and then solve microstructure design problems for a different, higher-fidelity, constitutive structure-property model without any retraining. These results demonstrate the potential of Decision Transformer models for the solution of materials design problems.
△ Less
Submitted 19 December, 2024;
originally announced December 2024.
-
How to Build a Quantum Supercomputer: Scaling from Hundreds to Millions of Qubits
Authors:
Masoud Mohseni,
Artur Scherer,
K. Grace Johnson,
Oded Wertheim,
Matthew Otten,
Navid Anjum Aadit,
Yuri Alexeev,
Kirk M. Bresniker,
Kerem Y. Camsari,
Barbara Chapman,
Soumitra Chatterjee,
Gebremedhin A. Dagnew,
Aniello Esposito,
Farah Fahim,
Marco Fiorentino,
Archit Gajjar,
Abdullah Khalid,
Xiangzhou Kong,
Bohdan Kulchytskyy,
Elica Kyoseva,
Ruoyu Li,
P. Aaron Lott,
Igor L. Markov,
Robert F. McDermott,
Giacomo Pedretti
, et al. (16 additional authors not shown)
Abstract:
In the span of four decades, quantum computation has evolved from an intellectual curiosity to a potentially realizable technology. Today, small-scale demonstrations have become possible for quantum algorithmic primitives on hundreds of physical qubits and proof-of-principle error-correction on a single logical qubit. Nevertheless, despite significant progress and excitement, the path toward a ful…
▽ More
In the span of four decades, quantum computation has evolved from an intellectual curiosity to a potentially realizable technology. Today, small-scale demonstrations have become possible for quantum algorithmic primitives on hundreds of physical qubits and proof-of-principle error-correction on a single logical qubit. Nevertheless, despite significant progress and excitement, the path toward a full-stack scalable technology is largely unknown. There are significant outstanding quantum hardware, fabrication, software architecture, and algorithmic challenges that are either unresolved or overlooked. These issues could seriously undermine the arrival of utility-scale quantum computers for the foreseeable future. Here, we provide a comprehensive review of these scaling challenges. We show how the road to scaling could be paved by adopting existing semiconductor technology to build much higher-quality qubits, employing system engineering approaches, and performing distributed quantum computation within heterogeneous high-performance computing infrastructures. These opportunities for research and development could unlock certain promising applications, in particular, efficient quantum simulation/learning of quantum data generated by natural or engineered quantum systems. To estimate the true cost of such promises, we provide a detailed resource and sensitivity analysis for classically hard quantum chemistry calculations on surface-code error-corrected quantum computers given current, target, and desired hardware specifications based on superconducting qubits, accounting for a realistic distribution of errors. Furthermore, we argue that, to tackle industry-scale classical optimization and machine learning problems in a cost-effective manner, heterogeneous quantum-probabilistic computing with custom-designed accelerators should be considered as a complementary path toward scalability.
△ Less
Submitted 31 January, 2025; v1 submitted 15 November, 2024;
originally announced November 2024.
-
Multiscale simulation of spatially correlated microstructure via a latent space representation
Authors:
Reese E. Jones,
Craig M. Hamel,
Dan Bolintineanu,
Kyle Johnson,
Robert Buarque de Macedo,
Jan Fuhg,
Nikolaos Bouklas,
Sharlotte Kramer
Abstract:
When deformation gradients act on the scale of the microstructure of a part due to geometry and loading, spatial correlations and finite-size effects in simulation cells cannot be neglected. We propose a multiscale method that accounts for these effects using a variational autoencoder to encode the structure-property map of the stochastic volume elements making up the statistical description of th…
▽ More
When deformation gradients act on the scale of the microstructure of a part due to geometry and loading, spatial correlations and finite-size effects in simulation cells cannot be neglected. We propose a multiscale method that accounts for these effects using a variational autoencoder to encode the structure-property map of the stochastic volume elements making up the statistical description of the part. In this paradigm the autoencoder can be used to directly encode the microstructure or, alternatively, its latent space can be sampled to provide likely realizations. We demonstrate the method on three examples using the common additively manufactured material AlSi10Mg in: (a) a comparison with direct numerical simulation of the part microstructure, (b) a push forward of microstructural uncertainty to performance quantities of interest, and (c) a simulation of functional gradation of a part with stochastic microstructure.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
Deep-Learned Generators of Porosity Distributions Produced During Metal Additive Manufacturing
Authors:
Francis Ogoke,
Kyle Johnson,
Michael Glinsky,
Chris Laursen,
Sharlotte Kramer,
Amir Barati Farimani
Abstract:
Laser Powder Bed Fusion has become a widely adopted method for metal Additive Manufacturing (AM) due to its ability to mass produce complex parts with increased local control. However, AM produced parts can be subject to undesirable porosity, negatively influencing the properties of printed components. Thus, controlling porosity is integral for creating effective parts. A precise understanding of…
▽ More
Laser Powder Bed Fusion has become a widely adopted method for metal Additive Manufacturing (AM) due to its ability to mass produce complex parts with increased local control. However, AM produced parts can be subject to undesirable porosity, negatively influencing the properties of printed components. Thus, controlling porosity is integral for creating effective parts. A precise understanding of the porosity distribution is crucial for accurately simulating potential fatigue and failure zones. Previous research on generating synthetic porous microstructures have succeeded in generating parts with high density, isotropic porosity distributions but are often inapplicable to cases with sparser, boundary-dependent pore distributions. Our work bridges this gap by providing a method that considers these constraints by deconstructing the generation problem into its constitutive parts. A framework is introduced that combines Generative Adversarial Networks with Mallat Scattering Transform-based autocorrelation methods to construct novel realizations of the individual pore geometries and surface roughness, then stochastically reconstruct them to form realizations of a porous printed part. The generated parts are compared to the existing experimental porosity distributions based on statistical and dimensional metrics, such as nearest neighbor distances, pore volumes, pore anisotropies and scattering transform based auto-correlations.
△ Less
Submitted 11 May, 2022;
originally announced May 2022.
-
Birefringent Rydberg Dark Matter from Cosmic Dust
Authors:
Keith Johnson
Abstract:
Water nanoclusters ejected to space from abundant amorphous water-ice-coated cosmic dust have been proposed to constitute Rydberg baryonic dark matter. This phenomenological model is now qualitatively supported by several recent observations: the laboratory-generated ejection of water nanoclusters from amorphous water-ice; the absence of dark matter in Galaxy NGC 1052-DF2; a recent study of dark m…
▽ More
Water nanoclusters ejected to space from abundant amorphous water-ice-coated cosmic dust have been proposed to constitute Rydberg baryonic dark matter. This phenomenological model is now qualitatively supported by several recent observations: the laboratory-generated ejection of water nanoclusters from amorphous water-ice; the absence of dark matter in Galaxy NGC 1052-DF2; a recent study of dark matter in distant galaxies reporting the direct interaction of dark matter with galactic baryonic matter; the bullet cluster; and the birefringence of the cosmic microwave background. A link between Rydberg dark matter and dark energy and its relevance to quintessence are reviewed. The use of the James Webb Space Telescope to test this model further is suggested.
△ Less
Submitted 4 October, 2022; v1 submitted 22 April, 2022;
originally announced April 2022.
-
Measuring High-Order Phonon Correlations in an Optomechanical Resonator
Authors:
Yogesh S. S. Patil,
Jiaxin Yu,
Sean Frazier,
Yiqi Wang,
Kale Johnson,
Jared Fox,
Jakob Reichel,
Jack G. E. Harris
Abstract:
We use single photon detectors to probe the motional state of a superfluid $^4$He resonator of mass $\sim1$ ng. The arrival times of Stokes and anti-Stokes photons (scattered by the resonator's acoustic mode) are used to measure the resonator's phonon coherences up to the fourth order. By post-selecting on photon detection events, we also measure coherences in the resonator when $\leq3$ phonons ha…
▽ More
We use single photon detectors to probe the motional state of a superfluid $^4$He resonator of mass $\sim1$ ng. The arrival times of Stokes and anti-Stokes photons (scattered by the resonator's acoustic mode) are used to measure the resonator's phonon coherences up to the fourth order. By post-selecting on photon detection events, we also measure coherences in the resonator when $\leq3$ phonons have been added or subtracted. These measurements are found to be consistent with predictions that assume the acoustic mode to be in thermal equilibrium with a bath through a Markovian coupling.
△ Less
Submitted 18 January, 2022;
originally announced January 2022.
-
Five Degree-of-Freedom Property Interpolation of Arbitrary Grain Boundaries via Voronoi Fundamental Zone Octonion Framework
Authors:
Sterling G. Baird,
Eric R. Homer,
David T. Fullwood,
Oliver K. Johnson
Abstract:
We introduce the Voronoi fundamental zone octonion interpolation framework for grain boundary (GB) structure-property models and surrogates. The VFZO framework offers an advantage over other five degree-of-freedom based property interpolation methods because it is constructed as a point set in a manifold. This means that directly computed Euclidean distances approximate the original octonion dista…
▽ More
We introduce the Voronoi fundamental zone octonion interpolation framework for grain boundary (GB) structure-property models and surrogates. The VFZO framework offers an advantage over other five degree-of-freedom based property interpolation methods because it is constructed as a point set in a manifold. This means that directly computed Euclidean distances approximate the original octonion distance with significantly reduced computation runtime (~7 CPU minutes vs. 153 CPU days for a 50000x50000 pairwise-distance matrix). This increased efficiency facilitates lower interpolation error through the use of significantly more input data. We demonstrate grain boundary energy interpolation results for a non-smooth validation function and simulated bi-crystal datasets for Fe and Ni using four interpolation methods: barycentric interpolation, Gaussian process regression (GPR), inverse-distance weighting, and nearest-neighbor interpolation. These are evaluated for 50000 random input GBs and 10 000 random prediction GBs. The best performance was achieved with GPR, which resulted in a reduction of the root mean square error (RMSE) by 83.0% relative to RMSE of a constant, average model. Likewise, interpolation on a large, noisy, molecular statics Fe simulation dataset improves performance by 34.4% compared to 21.2% in prior work. Interpolation on a small, low-noise MS Ni simulation dataset is similar to interpolation results for the original octonion metric (57.6% vs. 56.4%). A vectorized, parallelized, MATLAB interpolation function (interp5DOF.m) and related routines are available in our VFZO repository (github.com/sgbaird-5dof/interp) which can be applied to other crystallographic point groups. The VFZO framework offers advantages for computing distances between GBs, estimating property values for arbitrary GBs, and modeling surrogates of computationally expensive 5DOF functions and simulations.
△ Less
Submitted 13 April, 2021;
originally announced April 2021.
-
Robust High-Dynamic-Range Vector Magnetometry via Nitrogen-Vacancy Centers in Diamond
Authors:
Hannah Clevenson,
Linh M. Pham,
Carson Teale,
Kerry Johnson,
Dirk Englund,
Danielle Braje
Abstract:
We demonstrate a robust, scale-factor-free vector magnetometer, which uses a closed-loop frequency-locking scheme to simultaneously track Zeeman-split resonance pairs of nitrogen-vacancy (NV) centers in diamond. Compared with open-loop methodologies, this technique is robust against fluctuations in temperature, resonance linewidth, and contrast; offers a three-order-of-magnitude increase in dynami…
▽ More
We demonstrate a robust, scale-factor-free vector magnetometer, which uses a closed-loop frequency-locking scheme to simultaneously track Zeeman-split resonance pairs of nitrogen-vacancy (NV) centers in diamond. Compared with open-loop methodologies, this technique is robust against fluctuations in temperature, resonance linewidth, and contrast; offers a three-order-of-magnitude increase in dynamic range; and allows for simultaneous interrogation of multiple transition frequencies. By directly detecting the resonance frequencies of NV centers aligned along each of the diamond's four tetrahedral crystallographic axes, we perform full vector reconstruction of an applied magnetic field.
△ Less
Submitted 26 February, 2018;
originally announced February 2018.
-
High-sensitivity, spin-based electrometry with an ensemble of nitrogen-vacancy centers in diamond
Authors:
Edward H. Chen,
Hannah A. Clevenson,
Kerry A. Johnson,
Linh M. Pham,
Dirk R. Englund,
Philip R. Hemmer,
Danielle A. Braje
Abstract:
We demonstrate a spin-based, all-dielectric electrometer based on an ensemble of nitrogen-vacancy (NV$^-$) defects in diamond. An applied electric field causes energy level shifts symmetrically away from the NV$^-$'s degenerate triplet states via the Stark effect; this symmetry provides immunity to temperature fluctuations allowing for shot-noise-limited detection. Using an ensemble of NV$^-$s, we…
▽ More
We demonstrate a spin-based, all-dielectric electrometer based on an ensemble of nitrogen-vacancy (NV$^-$) defects in diamond. An applied electric field causes energy level shifts symmetrically away from the NV$^-$'s degenerate triplet states via the Stark effect; this symmetry provides immunity to temperature fluctuations allowing for shot-noise-limited detection. Using an ensemble of NV$^-$s, we demonstrate shot-noise limited sensitivities approaching 1 V/cm/$\sqrt{\text{Hz}}$ under ambient conditions, at low frequencies ($<$10 Hz), and over a large dynamic range (20 dB). A theoretical model for the ensemble of NV$^-$s fits well with measurements of the ground-state electric susceptibility parameter, $\langle k_\perp\rangle$. Implications of spin-based, dielectric sensors for micron-scale electric-field sensing are discussed.
△ Less
Submitted 22 March, 2017;
originally announced March 2017.
-
Spectroscopic Properties of Nanotube-Chromophore Hybrids
Authors:
Changshui Huang,
Randy K. Wang,
Bryan M. Wong,
David J. McGee,
François Léonard,
Yun Jun Kim,
Kirsten F. Johnson,
Michael S. Arnold,
Mark A. Eriksson,
Padma Gopalan
Abstract:
Recently, individual single-walled carbon nanotubes (SWNTs) functionalized with azo-benzene chromophores were shown to form a new class of hybrid nanomaterials for optoelectronics applications. Here we use a number of experimental techniques and theory to understand the binding, orientation, and nature of coupling between chromophores and the nanotubes, all of which are of relevance to future opti…
▽ More
Recently, individual single-walled carbon nanotubes (SWNTs) functionalized with azo-benzene chromophores were shown to form a new class of hybrid nanomaterials for optoelectronics applications. Here we use a number of experimental techniques and theory to understand the binding, orientation, and nature of coupling between chromophores and the nanotubes, all of which are of relevance to future optimization of these hybrid materials. We find that the binding energy between chromophores and nanotubes depends strongly on the type of tether that is used to bind the chromophores to the nanotubes, with pyrene tethers resulting in more than 90% of the bound chromophores during processing. DFT calculations show that the binding energy of the chromophores to the nanotubes is maximized for chromophores parallel to the nanotube sidewall, even with the use of tethers; second harmonic generation shows that there is nonetheless a partial radial orientation of the chromophores on the nanotubes. We find weak electronic coupling between the chromophores and the SWNTs, consistent with non-covalent binding. The chromophore-nanotube coupling, while weak, is sufficient to quench the chromophore fluorescence. Stern-Volmer plots are non-linear, which supports a combination of static and dynamic quenching processes. The chromophore orientation is an important variable for chromophore-nanotube phototransistors, and our experiments suggest the possibility for further optimizing this orientational degree of freedom.
△ Less
Submitted 21 December, 2013;
originally announced December 2013.
-
Oscillatory Flows Induced by Microorganisms Swimming in Two-dimensions
Authors:
Jeffrey S. Guasto,
Karl A. Johnson,
J. P. Gollub
Abstract:
We present the first time-resolved measurements of the oscillatory velocity field induced by swimming unicellular microorganisms. Confinement of the green alga C. reinhardtii in stabilized thin liquid films allows simultaneous tracking of cells and tracer particles. The measured velocity field reveals complex time-dependent flow structures, and scales inversely with distance. The instantaneous mec…
▽ More
We present the first time-resolved measurements of the oscillatory velocity field induced by swimming unicellular microorganisms. Confinement of the green alga C. reinhardtii in stabilized thin liquid films allows simultaneous tracking of cells and tracer particles. The measured velocity field reveals complex time-dependent flow structures, and scales inversely with distance. The instantaneous mechanical power generated by the cells is measured from the velocity fields and peaks at 15 fW. The dissipation per cycle is more than four times what steady swimming would require.
△ Less
Submitted 15 August, 2010;
originally announced August 2010.
-
Water Buckyball Terahertz Vibrations in Physics, Chemistry, Biology, and Cosmology
Authors:
Keith Johnson
Abstract:
Pentagonal dodecahedral buckyball-like water clusters and arrays thereof are shown from first-principles electronic-structure calculations to possess unique terahertz vibrational modes in the 1-6 THz range, corresponding to oxygen-oxygen-oxygen bending and twisting surface distortions of the clusters. In their excited electronic states these water clusters constitute a form of Rydberg matter. Ap…
▽ More
Pentagonal dodecahedral buckyball-like water clusters and arrays thereof are shown from first-principles electronic-structure calculations to possess unique terahertz vibrational modes in the 1-6 THz range, corresponding to oxygen-oxygen-oxygen bending and twisting surface distortions of the clusters. In their excited electronic states these water clusters constitute a form of Rydberg matter. Applications to Physics, Chemistry, Biology, and Cosmology are described.
△ Less
Submitted 12 February, 2009;
originally announced February 2009.
-
Water Vapor: An Extraordinary Terahertz Wave Source under Optical Excitation
Authors:
Keith Johnson,
Matthew Price-Gallagher,
Orval Mamer,
Alain Lesimple,
Clark Fletcher,
Yunqing Chen,
Xiaofei Lu,
Masashi Yamaguchi,
X. -C. Zhang
Abstract:
In modern terahertz (THz) sensing and imaging spectroscopy, water is considered a nemesis to be avoided due to strong absorption in the THz frequency range. Here we report the first experimental demonstration and theoretical implications of using femtosecond laser pulses to generate intense broadband THz emission from water vapor. When we focused an intense laser pulse in water vapor contained i…
▽ More
In modern terahertz (THz) sensing and imaging spectroscopy, water is considered a nemesis to be avoided due to strong absorption in the THz frequency range. Here we report the first experimental demonstration and theoretical implications of using femtosecond laser pulses to generate intense broadband THz emission from water vapor. When we focused an intense laser pulse in water vapor contained in a gas cell or injected from a gas jet nozzle, an extraordinarily strong THz field from optically excited water vapor is observed. Water vapor has more than 50% greater THz generation efficiency than dry nitrogen. It had previously been assumed that the nonlinear generation of THz waves in this manner primarily involves a free-electron plasma, but we show that the molecular structure plays an essential role in the process. In particular, we found that THz wave generation from H2O vapor is significantly stronger than that from D2O vapor. Vibronic activities of water cluster ions, occurring naturally in water vapor, may possibly contribute to the observed isotope effect along with rovibrational contributions from the predominant monomers.
△ Less
Submitted 11 February, 2009;
originally announced February 2009.
-
Hybrid path integral Monte Carlo simulation of rigid diatomic molecules: effect of quantized rotations on the selectivity of hydrogen isotopes in carbon nanotubes
Authors:
G. Garberoglio,
J. K. Johnson
Abstract:
We present a multiple time step algorithm for hybrid path integral Monte Carlo simulations involving rigid linear rotors. We show how to calculate the quantum torques needed in the simulation from the rotational density matrix, for which we develop an approximate expression suitable in the case of heteronuclear molecules.
We use this method to study the effect of rotational quantization on the…
▽ More
We present a multiple time step algorithm for hybrid path integral Monte Carlo simulations involving rigid linear rotors. We show how to calculate the quantum torques needed in the simulation from the rotational density matrix, for which we develop an approximate expression suitable in the case of heteronuclear molecules.
We use this method to study the effect of rotational quantization on the quantum sieving properties of carbon nanotubes, with particular emphasis to the para-T2/para-H2 selectivity at 20 K. We show how to treat classically only some of the degrees of freedom of the hydrogen molecule and we find that in the limit of zero pressure the quantized nature of the rotational degrees of freedom greatly influence the selectivity, especially in the case of the (3,6) nanotube, which is the narrowest tube that we have studied.
We also use path integral Monte Carlo simulations to calculate adsorption isotherms of different hydrogen isotopes in the interior of carbon nanotubes and the corresponding selectivity at finite pressures. It is found that the selectivity increases with respect to the zero pressure value and tends to a constant value at saturation. We use a simplified effective harmonic oscillator model to discuss the origin of this behavior.
△ Less
Submitted 12 March, 2007;
originally announced March 2007.
-
Microscopic and macroscopic compaction of cohesive powders
Authors:
M. Morgeneyer,
J. Schwedes,
K. Johnson,
D. Kadau,
D. E. Wolf,
L. Heim
Abstract:
A novel method to investigate the compaction behaviour of cohesive powders is presented. As a sample, a highly porous agglomerate formed by random ballistic deposition (RBD) of micron sized spherical particles is used. A nanomanipulator deforms this small structure under scanning electron microscope observation, allowing for the tracking of individual particle motion. Defined forces are applied…
▽ More
A novel method to investigate the compaction behaviour of cohesive powders is presented. As a sample, a highly porous agglomerate formed by random ballistic deposition (RBD) of micron sized spherical particles is used. A nanomanipulator deforms this small structure under scanning electron microscope observation, allowing for the tracking of individual particle motion. Defined forces are applied and the resulting deformations are measured. The hereby obtained results are compared to results from threedimensional discrete element simulations as well as macroscopic compaction experiments. Relevant simulation parameters are determined by colloidal probe measurements.
△ Less
Submitted 4 February, 2005;
originally announced February 2005.
-
Wetting transition of water on graphite and other surfaces
Authors:
S. M. Gatica,
J. K. Johnson,
X. C. Zhao,
M. W. Cole
Abstract:
A wetting transition occurs when the contact angle of a liquid drop on a surface changes from a nonzero value to zero. Such a transition has never been observed for water on any solid surface. This paper discusses the value of the temperature T_w at which the transition should occur for water on graphite. A simple model, previously used for nonpolar fluids, predicts the value of $T_w$ as a funct…
▽ More
A wetting transition occurs when the contact angle of a liquid drop on a surface changes from a nonzero value to zero. Such a transition has never been observed for water on any solid surface. This paper discusses the value of the temperature T_w at which the transition should occur for water on graphite. A simple model, previously used for nonpolar fluids, predicts the value of $T_w$ as a function of the well-depth D of the adsorption potential. While $D$ is not well known for the case of water/graphite, the model implies that T_w is likely to fall in the range 350 to 500 K. Experimental search for this transition is warranted. Water wetting transition temperatures on other surfaces are also discussed.
△ Less
Submitted 14 April, 2004;
originally announced April 2004.
-
Many-body interactions among adsorbed atoms and molecules within carbon nanotubes and in free space
Authors:
Milen K. Kostov,
Milton W. Cole,
John Courtenay Lewis,
Phong Diep,
J. Karl Johnson
Abstract:
This paper assesses the importance of three-body triple dipole interactions for quasi-one dimensional phases of He, Ne, H_2, Ar, Kr and Xe confined within interstitial channels or on the external surfaces of nanotube bundles. We find the substrate-mediated contribution to be substantial: for interstitial H_2 the well depth of the effective pair potential is reduced to approximately one half of i…
▽ More
This paper assesses the importance of three-body triple dipole interactions for quasi-one dimensional phases of He, Ne, H_2, Ar, Kr and Xe confined within interstitial channels or on the external surfaces of nanotube bundles. We find the substrate-mediated contribution to be substantial: for interstitial H_2 the well depth of the effective pair potential is reduced to approximately one half of its value in free space.
We carry out ab initio calculations on linear and equilateral configurations of H_2 trimer and find that overlap interactions do not greatly change the DDD interaction in the linear configuration when the spacing is greater than about 3 A. However, the DDD interaction alone is clearly insufficient for the triangular configurations studied.
△ Less
Submitted 3 July, 2000;
originally announced July 2000.
-
Axial phase of quantum fluids in nanotubes
Authors:
S. M. Gatica,
G. Stan,
M. M. Calbi,
J. K. Johnson,
M. W. Cole
Abstract:
We explore the equations of state and other properties of various quantum fluids (3He, 4He, their mixtures, and H_2) confined within individual carbon nanotubes. Above a threshold number of particles, N_a, the fluid density near the axis begins to grow above a negligibly small value. The properties of this axial fluid phase are sensitive to the tube size and hence to the transverse compression i…
▽ More
We explore the equations of state and other properties of various quantum fluids (3He, 4He, their mixtures, and H_2) confined within individual carbon nanotubes. Above a threshold number of particles, N_a, the fluid density near the axis begins to grow above a negligibly small value. The properties of this axial fluid phase are sensitive to the tube size and hence to the transverse compression in the case of a bundle of nanotubes. We consider He at zero temperature and H_2 at low temperatures.
△ Less
Submitted 13 April, 2000;
originally announced April 2000.
-
Substrate-based atom waveguide using guided two-color evanescent light fields
Authors:
A. H. Barnett,
S. P. Smith,
M. Olshanii,
K. S. Johnson,
A. W. Adams,
M. Prentiss
Abstract:
We propose a dipole-force linear waveguide which confines neutral atoms up to lambda/2 above a microfabricated single-mode dielectric optical guide. The optical guide carries far blue-detuned light in the horizontally-polarized TE mode and far red-detuned light in the vertically-polarized TM mode, with both modes close to optical cut-off. A trapping minimum in the transverse plane is formed abov…
▽ More
We propose a dipole-force linear waveguide which confines neutral atoms up to lambda/2 above a microfabricated single-mode dielectric optical guide. The optical guide carries far blue-detuned light in the horizontally-polarized TE mode and far red-detuned light in the vertically-polarized TM mode, with both modes close to optical cut-off. A trapping minimum in the transverse plane is formed above the optical guide due to the differing evanescent decay lengths of the two modes. This design allows manufacture of mechanically stable atom-optical elements on a substrate. We calculate the full vector bound modes for an arbitrary guide shape using two-dimensional non-uniform finite elements in the frequency-domain, allowing us to optimize atom waveguide properties. We find that a rectangular optical guide of 0.8um by 0.2um carrying 6mW of total laser power (detuning +-15nm about the D2 line) gives a trap depth of 200uK for cesium atoms (m_F = 0), transverse oscillation frequencies of f_x = 40kHz and f_y = 160kHz, collection area ~ 1um^2 and coherence time of 9ms. We discuss the effects of non-zero m_F, surface interactions, heating rate, the substrate refractive index, and the limits on waveguide bending radius.
△ Less
Submitted 9 February, 2000; v1 submitted 9 July, 1999;
originally announced July 1999.
-
"Water Buckyballs" Chemical, Catalytic, and Cosmic Implications
Authors:
Keith Johnson
Abstract:
Possible chemical, catalytic, and cosmic roles of charged pentagonal dodecahedral water clusters having "buckyball-like" symmetry are discussed on the basis of electronic and vibronic theory and experiment. The electronic structure in conjunction with the dynamic Jahn-Teller effect is argued to make water buckyballs catalysts and oxygenates for fuel combustion and active agents in biological sys…
▽ More
Possible chemical, catalytic, and cosmic roles of charged pentagonal dodecahedral water clusters having "buckyball-like" symmetry are discussed on the basis of electronic and vibronic theory and experiment. The electronic structure in conjunction with the dynamic Jahn-Teller effect is argued to make water buckyballs catalysts and oxygenates for fuel combustion and active agents in biological systems. The broad electronic and unique low-frequency vibronic spectra of water buckyballs may explain certain diffuse interstellar bands, far-infrared, ultraviolet, and x-ray cosmic background radiation, and some "missing cosmic baryonic matter". The relevance of water buckyballs to the properties of liquid and supercritical water concludes the paper.
△ Less
Submitted 3 August, 1998; v1 submitted 30 July, 1998;
originally announced July 1998.
