Showing 1–8 of 8 results for author: Jerger, M

Dispersive Qubit Readout with Intrinsic Resonator Reset

Authors: M. Jerger, F. Motzoi, Y. Gao, C. Dickel, L. Buchmann, A. Bengtsson, G. Tancredi, C. W. Warren, J. Bylander, D. DiVincenzo, R. Barends, P. A. Bushev

Abstract: A key challenge in quantum computing is speeding up measurement and initialization. Here, we experimentally demonstrate a dispersive measurement method for superconducting qubits that simultaneously measures the qubit and returns the readout resonator to its initial state. The approach is based on universal analytical pulses and requires knowledge of the qubit and resonator parameters, but needs n… ▽ More A key challenge in quantum computing is speeding up measurement and initialization. Here, we experimentally demonstrate a dispersive measurement method for superconducting qubits that simultaneously measures the qubit and returns the readout resonator to its initial state. The approach is based on universal analytical pulses and requires knowledge of the qubit and resonator parameters, but needs no direct optimization of the pulse shape, even when accounting for the nonlinearity of the system. Moreover, the method generalizes to measuring an arbitrary number of modes and states. For the qubit readout, we can drive the resonator to $\sim 10^2$ photons and back to $\sim 10^{-3}$ photons in less than $3 κ^{-1}$, while still achieving a $T_1$-limited assignment error below 1\%. We also present universal pulse shapes and experimental results for qutrit readout. △ Less

Submitted 10 June, 2024; v1 submitted 7 June, 2024; originally announced June 2024.

Comments: 8 pages, 6 figures

In situ characterization of qubit control lines: a qubit as a vector network analyzer

Authors: Markus Jerger, Anatoly Kulikov, Zénon Vasseli, Arkady Fedorov

Abstract: We present a technique to measure the transfer function of a control line using a qubit as a vector network analyzer. Our method requires coupling the line under test to the the longitudinal component of the Hamiltonian of the qubit and the ability to induce Rabi oscillations through simultaneous driving of the transversal component. We used this technique to characterize the 'flux' control of a s… ▽ More We present a technique to measure the transfer function of a control line using a qubit as a vector network analyzer. Our method requires coupling the line under test to the the longitudinal component of the Hamiltonian of the qubit and the ability to induce Rabi oscillations through simultaneous driving of the transversal component. We used this technique to characterize the 'flux' control of a superconducting Transmon qubit in the range of 8 to 400\,MHz. Our method can be used for the qubit 'flux' line calibration to increase the fidelity of entangling gates for the quantum processor. The qubit can be also used as a microscopic probe of the electro-magnetic fields on a chip. △ Less

Submitted 3 December, 2018; v1 submitted 19 June, 2017; originally announced June 2017.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 123, 150501 (2019)

Quartz-superconductor quantum electromechanical system

Authors: M. J. Woolley, M. F. Emzir, G. J. Milburn, M. Jerger, M. Goryachev, M. E. Tobar, A. Fedorov

Abstract: We propose and analyse a quantum electromechanical system composed of a monolithic quartz bulk acoustic wave (BAW) oscillator coupled to a superconducting transmon qubit via an intermediate LC electrical circuit. Monolithic quartz oscillators offer unprecedentedly high effective masses and quality factors for the investigation of mechanical oscillators in the quantum regime. Ground-state cooling o… ▽ More We propose and analyse a quantum electromechanical system composed of a monolithic quartz bulk acoustic wave (BAW) oscillator coupled to a superconducting transmon qubit via an intermediate LC electrical circuit. Monolithic quartz oscillators offer unprecedentedly high effective masses and quality factors for the investigation of mechanical oscillators in the quantum regime. Ground-state cooling of such mechanical modes via resonant piezoelectric coupling to an LC circuit, which is itself sideband cooled via coupling to a transmon qubit, is shown to be feasible. The fluorescence spectrum of the qubit, containing motional sideband contributions due to the couplings to the oscillator modes, is obtained and the imprint of the electromechanical steady-state on the spectrum is determined. This allows the qubit to function both as a cooling resource for, and transducer of, the mechanical oscillator. The results described are relevant to any hybrid quantum system composed of a qubit coupled to two (coupled or uncoupled) thermal oscillator modes. △ Less

Submitted 6 April, 2016; originally announced April 2016.

Comments: 19 pages, 3 figures

Journal ref: Phys. Rev. B 93, 224518 (2016)

Probing the TLS Density of States in SiO Films using Superconducting Lumped Element Resonators

Authors: S. T. Skacel, Ch. Kaiser, S. Wuensch, H. Rotzinger, A. Lukashenko, M. Jerger, G. Weiss, M. Siegel, A. V. Ustinov

Abstract: We have investigated dielectric losses in amorphous SiO thin films under operating conditions of superconducting qubits (mK temperatures and low microwave powers). For this purpose, we have developed a broadband measurement setup employing multiplexed lumped element resonators using a broadband power combiner and a low-noise amplifier. The measured temperature and power dependences of the dielectr… ▽ More We have investigated dielectric losses in amorphous SiO thin films under operating conditions of superconducting qubits (mK temperatures and low microwave powers). For this purpose, we have developed a broadband measurement setup employing multiplexed lumped element resonators using a broadband power combiner and a low-noise amplifier. The measured temperature and power dependences of the dielectric losses are in good agreement with those predicted for atomic two-level tunneling systems (TLS). By measuring the losses at different frequencies, we found that the TLS density of states is energy dependent. This had not been seen previously in loss measurements. These results contribute to a better understanding of decoherence effects in superconducting qubits and suggest a possibility to minimize TLS-related decoherence by reducing the qubit operation frequency. △ Less

Submitted 3 July, 2014; originally announced July 2014.

Comments: 4 pages, 6 figures

Anisotropic rare-earth spin ensemble strongly coupled to a superconducting resonator

Authors: S. Probst, H. Rotzinger, S. Wünsch, P. Jung, M. Jerger, M. Siegel, A. V. Ustinov, P. A. Bushev

Abstract: Interfacing photonic and solid-state qubits within a hybrid quantum architecture offers a promising route towards large scale distributed quantum computing. Ideal candidates for coherent qubit interconversion are optically active spins magnetically coupled to a superconducting resonator. We report on a cavity QED experiment with magnetically anisotropic Er3+:Y2SiO5 crystals and demonstrate strong… ▽ More Interfacing photonic and solid-state qubits within a hybrid quantum architecture offers a promising route towards large scale distributed quantum computing. Ideal candidates for coherent qubit interconversion are optically active spins magnetically coupled to a superconducting resonator. We report on a cavity QED experiment with magnetically anisotropic Er3+:Y2SiO5 crystals and demonstrate strong coupling of rare-earth spins to a lumped element resonator. In addition, the electron spin resonance and relaxation dynamics of the erbium spins are detected via direct microwave absorption, without aid of a cavity. △ Less

Submitted 12 December, 2012; originally announced December 2012.

Journal ref: Phys. Rev. Lett. 110, 157001 (2013)

Frequency Division Multiplexing Readout and Simultaneous Manipulation of an Array of Flux Qubits

Authors: Markus Jerger, Stefano Poletto, Pascal Macha, Uwe Hübner, Evgeni Il'ichev, Alexey V. Ustinov

Abstract: An important desired ingredient of superconducting quantum circuits is a readout scheme whose complexity does not increase with the number of qubits involved in the measurement. Here, we present a readout scheme employing a single microwave line, which enables simultaneous readout of multiple qubits. Consequently, scaling up superconducting qubit circuits is no longer limited by the readout appara… ▽ More An important desired ingredient of superconducting quantum circuits is a readout scheme whose complexity does not increase with the number of qubits involved in the measurement. Here, we present a readout scheme employing a single microwave line, which enables simultaneous readout of multiple qubits. Consequently, scaling up superconducting qubit circuits is no longer limited by the readout apparatus. Parallel readout of 6 flux qubits using a frequency division multiplexing technique is demonstrated, as well as simultaneous manipulation and time resolved measurement of 3 qubits. We discuss how this technique can be scaled up to read out hundreds of qubits on a chip. △ Less

Submitted 12 July, 2012; v1 submitted 29 May, 2012; originally announced May 2012.

Comments: 4 pages, 4 figures

Spectroscopy of a Qubit Array via a Single Transmission Line

Authors: M. Jerger, S. Poletto, P. Macha, U. Huebner, A. Lukashenko, E. Il'ichev, A. V. Ustinov

Abstract: Frequency-selective readout for superconducting qubits opens the way towards scaling qubit circuits up without increasing the number of measurement lines. Here we demonstrate the readout of an array of 7 flux qubits located on the same chip. Each qubit is placed near an individual lambda/4 resonator which, in turn, is coupled to a common microwave transmission line. We performed spectroscopy of al… ▽ More Frequency-selective readout for superconducting qubits opens the way towards scaling qubit circuits up without increasing the number of measurement lines. Here we demonstrate the readout of an array of 7 flux qubits located on the same chip. Each qubit is placed near an individual lambda/4 resonator which, in turn, is coupled to a common microwave transmission line. We performed spectroscopy of all qubits and determined their parameters in a single measurement run. △ Less

Submitted 2 February, 2011; originally announced February 2011.

Comments: 3 pages, 3 figures

Journal ref: Europhys. Lett. 96, 40012 (2011)

Resonant all-electric spin pumping with spin-orbit coupling

Authors: Valentina Brosco, Markus Jerger, Pablo San-Jose, Gergely Zarand, Alexander Shnirman, Gerd Schön

Abstract: All-electric devices for the generation and filtering of spin currents are of crucial importance for spintronics experiments and applications. Here we consider a quantum dot between two metallic leads in the presence of spin-orbit coupling, and we analyze in the frame of a scattering matrix approach the conditions for generating spin currents in an adiabatically driven two-terminal device. We th… ▽ More All-electric devices for the generation and filtering of spin currents are of crucial importance for spintronics experiments and applications. Here we consider a quantum dot between two metallic leads in the presence of spin-orbit coupling, and we analyze in the frame of a scattering matrix approach the conditions for generating spin currents in an adiabatically driven two-terminal device. We then focus on a dot with two resonant orbitals and show by specific examples that both spin filtering and pure spin current generation can be achieved. Finally, we discuss the effect of the Coulomb interaction. △ Less

Submitted 9 December, 2009; v1 submitted 6 December, 2009; originally announced December 2009.

Comments: 4 pages, corrected typo in list of authors

Journal ref: Phys. Rev. B 82, 041309(R) (2010)