-
Ferroelectric Switching in Hybrid Molecular Beam Epitaxy-Grown BaTiO3 Films
Authors:
Anusha Kamath Manjeshwar,
Zhifei Yang,
Chin-Hsiang Liao,
Jiaxuan Wen,
Steven J. Koester,
Richard D. James,
Bharat Jalan
Abstract:
Molecular beam epitaxy (MBE) is a promising synthesis technique for both heterostructure growth and epitaxial integration of ferroelectric BaTiO3. However, a direct measurement of the remnant polarization (P_r) has not been previously reported in MBE-grown BaTiO3 films. We report the in-situ growth of an all-epitaxial SrRuO3/BaTiO3/SrRuO3 heterostructure on Nb-doped SrTiO3 (001) substrates by hybr…
▽ More
Molecular beam epitaxy (MBE) is a promising synthesis technique for both heterostructure growth and epitaxial integration of ferroelectric BaTiO3. However, a direct measurement of the remnant polarization (P_r) has not been previously reported in MBE-grown BaTiO3 films. We report the in-situ growth of an all-epitaxial SrRuO3/BaTiO3/SrRuO3 heterostructure on Nb-doped SrTiO3 (001) substrates by hybrid MBE using metal-organic precursors. This capacitor structure consisting of 16 nm SrRuO3/40 nm BaTiO3/16 nm SrRuO3 shows hysteretic polarization-electric field (P-E) curves with P_r = 15 μC cm-2 at frequencies ranging from 500 Hz to 20 kHz, after isolating the intrinsic ferroelectric response from non-ferroelectric contributions using the Positive-Up-Negative-Down (PUND) method. We hypothesize that the asymmetry in switching behavior and current leakage has origins in structural defects.
△ Less
Submitted 3 May, 2025;
originally announced May 2025.
-
Composition Design of Shape Memory Ceramics based on Gaussian Processes
Authors:
Ashutosh Pandey,
Justin Jetter,
Hanlin Gu,
Eckhard Quandt,
Richard D. James
Abstract:
We present a Gaussian process machine learning model to predict the transformation temperature and lattice parameters of ZrO$_2$-based ceramics. Our overall goal is to search for a shape memory ceramic with a reversible transformation and low hysteresis. The identification of a new low hysteresis composition is based on design criteria that have been successful in metal alloys: (1) $λ_2 = 1$, wher…
▽ More
We present a Gaussian process machine learning model to predict the transformation temperature and lattice parameters of ZrO$_2$-based ceramics. Our overall goal is to search for a shape memory ceramic with a reversible transformation and low hysteresis. The identification of a new low hysteresis composition is based on design criteria that have been successful in metal alloys: (1) $λ_2 = 1$, where $λ_2$ is the middle eigenvalue of the transformation stretch tensor, (2) minimizing the max$|q(f)|$, which measures the deviation from satisfying the cofactor conditions, (3) high transformation temperature, (4) low transformational volume change, and (5) solid solubility. We generate many synthetic compositions, and identify a promising composition, 31.75Zr-37.75Hf-14.5Y-14.5Ta-1.5Er, which closely satisfies all the design criteria based on predictions from machine learning. However, differential thermal analysis reveals a relatively high thermal hysteresis of 137°C for this composition, indicating that the proposed design criteria are not universally applicable to all ZrO$_2$-based ceramics. We also explore reducing tetragonality of the austenite phase by addition of Er$_2$O$_3$. The idea is to tune the lattice parameters of austenite phase towards a cubic structure will increase the number of martensite variants, thus, allowing more flexibility for them to accommodate high strain during transformation. We find the effect of Er$_2$O$_3$ on tetragonality is weak due to limited solubility. We conclude that a more effective dopant is needed to achieve significant tetragonality reduction. Overall, Gaussian process machine learning models are shown to be highly useful for prediction of compositions and lattice parameters, but the discovery of low hysteresis ceramic materials apparently involves other factors not relevant to phase transformations in metals.
△ Less
Submitted 2 April, 2025;
originally announced April 2025.
-
Design of origami structures with curved tiles between the creases
Authors:
Huan Liu,
Richard D. James
Abstract:
An efficient way to introduce elastic energy that can bias an origami structure toward desired shapes is to allow curved tiles between the creases. The bending of the tiles supplies the energy and the tiles themselves may have additional functionality. In this paper, we present the theorem and systematic design methods for quite general curved origami structures that can be folded from a flat shee…
▽ More
An efficient way to introduce elastic energy that can bias an origami structure toward desired shapes is to allow curved tiles between the creases. The bending of the tiles supplies the energy and the tiles themselves may have additional functionality. In this paper, we present the theorem and systematic design methods for quite general curved origami structures that can be folded from a flat sheet, and we present methods to accurately find the stored elastic energy. Here the tiles are allowed to undergo curved isometric mappings, and the associated creases necessarily undergo isometric mappings as curves. These assumptions are consistent with a variety of practical methods for crease design. The h^3 scaling of the energy of thin sheets (h = thickness) spans a broad energy range. Different tiles in an origami design can have different values of h, and individual tiles can also have varying h. Following developments for piecewise rigid origami, we develop further the Lagrangian approach and the group orbit procedure in this context. We notice that some of the simplest designs that arise from the group orbit procedure for certain helical and conformal groups provide better matches to the buckling patterns observed in compressed cylinders and cones than known patterns.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
Theory of Intermediate Twinning and Spontaneous Polarization in Ferroelectric Potassium Sodium Niobate
Authors:
Georgios Grekas,
Patricia-Lia Pop-Ghe,
Eckhard Quandt,
Richard D. James
Abstract:
Potassium sodium niobate is considered a prominent material system as a substitute for lead-containing ferroelectric materials. It exhibits first-order phase transformations and ferroelectricity with potential applications ranging from energy conversion to innovative cooling technologies, thereby addressing important societal challenges. However, a major obstacle in the application of potassium so…
▽ More
Potassium sodium niobate is considered a prominent material system as a substitute for lead-containing ferroelectric materials. It exhibits first-order phase transformations and ferroelectricity with potential applications ranging from energy conversion to innovative cooling technologies, thereby addressing important societal challenges. However, a major obstacle in the application of potassium sodium niobate is its multi-scale heterogeneity and the lack of understanding of its phase transition pathway and microstructure. This can be seen from the findings of Pop-Ghe et al. (Ceram Int 47(14):20579-20585, 2021, https://doi.org/10.1016/j.ceramint.2021.04.067) which also reveal the occurrence of a phenomenon they term intermediate twinning during the phase transition. Here, we show that intermediate twinning is a consequence of energy minimization. We develop a geometrically nonlinear electroelastic energy function for potassium sodium niobate, including the cubic-tetragonal-orthorhombic transformations and ferroelectricity. The construction of the minimizers is based on compatibility conditions which ensure continuous deformations and pole-free interfaces. These minimizers agree with the experimental observations, including laminates between tetragonal variants under the cubic to tetragonal transformation, crossing twins under the tetragonal to orthorhombic transformation, intermediate twinning and spontaneous polarization. This shows how the full nonlinear electroelastic model provides a powerful tool in understanding, exploring, and tailoring the electromechanical properties of complex ferroelectric ceramics.
△ Less
Submitted 13 March, 2025; v1 submitted 3 February, 2023;
originally announced February 2023.
-
Design of soft magnetic materials
Authors:
Ananya Renuka Balakrishna,
Richard D. James
Abstract:
We present a strategy for the design of ferromagnetic materials with exceptionally low magnetic hysteresis, quantified by coercivity. In this strategy, we use a micromagnetic algorithm that we have developed in previous research and which has been validated by its success in solving the "Permalloy Problem" -- the well-known difficulty of predicting the composition 78.5% Ni of lowest coercivity in…
▽ More
We present a strategy for the design of ferromagnetic materials with exceptionally low magnetic hysteresis, quantified by coercivity. In this strategy, we use a micromagnetic algorithm that we have developed in previous research and which has been validated by its success in solving the "Permalloy Problem" -- the well-known difficulty of predicting the composition 78.5% Ni of lowest coercivity in the Fe-Ni system -- and by the insight, it provides into the "Coercivity Paradox" of W. F. Brown. Unexpectedly, the design strategy predicts that cubic materials with large saturation magnetization $m_s$ and large magnetocrystalline anisotropy constant $κ_1$ will have low coercivity on the order of that of Permalloy, as long as the magnetostriction constants $λ_{100}, λ_{111}$ are tuned to special values. The explicit prediction for a cubic material with low coercivity is the dimensionless number $(c_{11}-c_{12}) λ_{100}^2/κ_1 = 81$ for $\langle 100 \rangle$ easy axes. The results would seem to have a broad potential application, especially to magnetic materials of interest in energy research.
△ Less
Submitted 9 November, 2021;
originally announced November 2021.
-
A solution to the permalloy problem
Authors:
Ananya Renuka Balakrishna,
Richard D. James
Abstract:
We propose a solution to the longstanding permalloy problem$-$why the particular composition of permalloy, Fe$_{21.5}$Ni$_{78.5}$, achieves a dramatic drop in hysteresis, while its material constants show no obvious signal of this behavior. We use our recently developed coercivity tool to show that a delicate balance between local instabilities and magnetic material constants are necessary to expl…
▽ More
We propose a solution to the longstanding permalloy problem$-$why the particular composition of permalloy, Fe$_{21.5}$Ni$_{78.5}$, achieves a dramatic drop in hysteresis, while its material constants show no obvious signal of this behavior. We use our recently developed coercivity tool to show that a delicate balance between local instabilities and magnetic material constants are necessary to explain the dramatic drop of hysteresis at 78.5% Ni. Our findings are in agreement with the permalloy experiments and, more broadly, provide theoretical guidance for the discovery of novel low hysteresis magnetic alloys.
△ Less
Submitted 24 January, 2021;
originally announced January 2021.
-
A tool to predict coercivity in magnetic materials
Authors:
Ananya Renuka Balakrishna,
Richard D. James
Abstract:
Magnetic coercivity is often viewed to be lower in alloys with negligible (or zero) values of the anisotropy constant. However, this explains little about the dramatic drop in coercivity in FeNi alloys at a non-zero anisotropy value. Here, we develop a theoretical and computational tool to investigate the fundamental interplay between material constants that govern coercivity in bulk magnetic allo…
▽ More
Magnetic coercivity is often viewed to be lower in alloys with negligible (or zero) values of the anisotropy constant. However, this explains little about the dramatic drop in coercivity in FeNi alloys at a non-zero anisotropy value. Here, we develop a theoretical and computational tool to investigate the fundamental interplay between material constants that govern coercivity in bulk magnetic alloys. The two distinguishing features of our coercivity tool are that: (a) we introduce a large localized disturbance, such as a spike-like magnetic domain, that provides a nucleation barrier for magnetization reversal; and (b) we account for magneto-elastic energy -- however small -- in addition to the anisotropy and magnetostatic energy terms. We apply this coercivity tool to show that the interactions between local instabilities and material constants, such as anisotropy and magnetostriction constants, are key factors that govern magnetic coercivity in bulk alloys. Using our model, we show that coercivity is minimum at the permalloy composition (Fe-21.5Ni-78.5) at which the alloy's anisotropy constant is not zero. We systematically vary the values of the anisotropy and magnetostriction constants, around the permalloy composition, and identify new combinations of material constants at which coercivity is small. More broadly, our coercivity tool provides a theoretical framework to potentially discover novel magnetic materials with low coercivity.
△ Less
Submitted 16 December, 2020;
originally announced December 2020.
-
Strain Relaxation via Phase Transformation in SrSnO3
Authors:
Tristan K Truttmann,
Fengdeng Liu,
Javier Garcia Barriocanal,
Richard D. James,
Bharat Jalan
Abstract:
SrSnO3 (SSO) is an emerging ultra-wide bandgap (UWBG) semiconductor with potential for highpower applications. In-plane compressive strain was recently shown to stabilize the high temperature tetragonal phase of SSO at room temperature (RT) which exists at T > 1062 K in bulk. Here, we report on the study of strain relaxation in epitaxial, tetragonal phase of Nd-doped SSO films grown on GdScO3 (110…
▽ More
SrSnO3 (SSO) is an emerging ultra-wide bandgap (UWBG) semiconductor with potential for highpower applications. In-plane compressive strain was recently shown to stabilize the high temperature tetragonal phase of SSO at room temperature (RT) which exists at T > 1062 K in bulk. Here, we report on the study of strain relaxation in epitaxial, tetragonal phase of Nd-doped SSO films grown on GdScO3 (110) (GSO) substrates using radical-based hybrid molecular beam epitaxy. The thinnest SSO film (thickness, t = 12 nm) yielded a fully coherent tetragonal phase at RT. At 12 nm < t < 110 nm, the tetragonal phase first transformed into orthorhombic phase and then at t > 110 nm, the orthorhombic phase began to relax by forming misfit dislocations. Remarkably, the tetragonal phase remained fully coherent until it completely transformed into the orthorhombic phase. Using thickness- and temperature-dependent electronic transport measurements, we discuss the important roles of the surface, phase coexistence, and misfit dislocations on carrier density and mobility in Nd-doped SSO. This study provides unprecedented insights into the strain relaxation behavior and its consequences for electronic transport in doped SSO with implications in the development of high-power electronic devices.
△ Less
Submitted 19 October, 2020;
originally announced October 2020.
-
Self-Assembled Periodic Nanostructures Using Martensitic Phase Transformations
Authors:
Abhinav Prakash,
Tianqi Wang,
Ashley Bucsek,
Tristan K. Truttmann,
Alireza Fali,
Michele Cotrufo,
Hwanhui Yun,
Jong-Woo Kim,
Philip J. Ryan,
K. Andre Mkhoyan,
Andrea Alu,
Yohannes Abate,
Richard D. James,
Bharat Jalan
Abstract:
We describe a novel approach for the rational design and synthesis of self-assembled periodic nanostructures using martensitic phase transformations. We demonstrate this approach in a thin film of perovskite SrSnO3 with reconfigurable periodic nanostructures consisting of regularly spaced regions of sharply contrasted dielectric properties. The films can be designed to have different periodicities…
▽ More
We describe a novel approach for the rational design and synthesis of self-assembled periodic nanostructures using martensitic phase transformations. We demonstrate this approach in a thin film of perovskite SrSnO3 with reconfigurable periodic nanostructures consisting of regularly spaced regions of sharply contrasted dielectric properties. The films can be designed to have different periodicities and relative phase fractions via chemical doping or strain engineering. The dielectric contrast within a single film can be tuned using temperature and laser wavelength, effectively creating a variable photonic crystal. Our results show the realistic possibility of designing large-area self-assembled periodic structures using martensitic phase transformations with the potential of implementing "built-to-order" nanostructures for tailored optoelectronic functionalities.
△ Less
Submitted 13 September, 2020;
originally announced September 2020.
-
Origami and materials science
Authors:
Huan Liu,
Paul Plucinsky,
Fan Feng,
Richard D. James
Abstract:
Origami, the ancient art of folding thin sheets, has attracted increasing attention for its practical value in diverse fields: architectural design, therapeutics, deployable space structures, medical stent design, antenna design and robotics. In this survey article we highlight its suggestive value for the design of materials. At continuum level the rules for constructing origami have direct analo…
▽ More
Origami, the ancient art of folding thin sheets, has attracted increasing attention for its practical value in diverse fields: architectural design, therapeutics, deployable space structures, medical stent design, antenna design and robotics. In this survey article we highlight its suggestive value for the design of materials. At continuum level the rules for constructing origami have direct analogs in the analysis of the microstructure of materials. At atomistic level the structure of crystals, nanostructures, viruses and quasicrystals all link to simplified methods of constructing origami. Underlying these linkages are basic physical scaling laws, the role of isometries, and the simplifying role of group theory. Non-discrete isometry groups suggest an unexpected framework for the possible design of novel materials.
△ Less
Submitted 13 August, 2020;
originally announced August 2020.
-
Inverse design of deployable origami structures that approximate a general surface
Authors:
Xiangxin Dang,
Fan Feng,
Paul Plucinsky,
Richard D. James,
Huiling Duan,
Jianxiang Wang
Abstract:
Shape-morphing finds widespread utility, from the deployment of small stents and large solar sails to actuation and propulsion in soft robotics. Origami structures provide a template for shape-morphing, but rules for designing and folding the structures are challenging to integrate into broad and versatile design tools. Here, we develop a sequential two-stage optimization framework to approximate…
▽ More
Shape-morphing finds widespread utility, from the deployment of small stents and large solar sails to actuation and propulsion in soft robotics. Origami structures provide a template for shape-morphing, but rules for designing and folding the structures are challenging to integrate into broad and versatile design tools. Here, we develop a sequential two-stage optimization framework to approximate a general surface by a deployable origami structure. The optimization is performed over the space of all possible rigidly and flat-foldable quadrilateral mesh origami. So, the origami structures produced by our framework come with desirable engineering properties: they can be easily manufactured on a flat reference sheet, deployed to their target state by a controlled folding motion, then to a compact folded state in applications involving storage and portability. The attainable surfaces demonstrated include those with modest but diverse curvatures and unprecedented ones with sharp ridges. The framework provides not only a tool to design various deployable and retractable surfaces in engineering and architecture, but also a route to optimizing other properties and functionality.
△ Less
Submitted 7 September, 2021; v1 submitted 5 August, 2020;
originally announced August 2020.
-
Experimentally correlating thermal hysteresis and phase compatibility in multifunctional Heusler alloys
Authors:
Alberto A. Mendonça,
Luis Ghivelder,
Pablo L. Bernardo,
Hanlin Gu,
Richard D. James,
Lesley F. Cohen,
Angelo M. Gomes
Abstract:
Thermal hysteresis is recognized as one of the main drawbacks for cyclical applications of magnetocaloric and ferromagnetic shape memory materials with first order transformations. As such, the challenge is to develop strategies that improve the compatibility between the phases involved in the transitions and study its influence on thermal hysteresis. With this purpose, we explore the thermal, str…
▽ More
Thermal hysteresis is recognized as one of the main drawbacks for cyclical applications of magnetocaloric and ferromagnetic shape memory materials with first order transformations. As such, the challenge is to develop strategies that improve the compatibility between the phases involved in the transitions and study its influence on thermal hysteresis. With this purpose, we explore the thermal, structural and magnetic properties of the Ni2Mn1-xCuxGa0.84Al0.16 Heusler alloys. The alloys present a thermal hysteresis reduction of ~60% when the Cu content in the compound varies from x = 0.10 to x = 0.25, with a minimum hysteresis width of 6 K being achieved. We applied the geometric non-linear theory of martensite to address the phase compatibility, quantified by the parameter lambda2, the middle eigenvalue of the transformation stretch tensor, and found that the minimum of hysteresis is associated with a better crystallographic compatibility (lambda2 closer to 1) between the austenite and martensite phases. In addition, we show that the valley-like properties of hysteresis found in the Ni2Mn1-xCuxGa0.84Al0.16 compounds is present in several other alloys in the literature. These results provide new pathways to understand as well as to masters the phase compatibility and ultimately achieve a low thermal hysteresis in multifunctional Heusler alloys.
△ Less
Submitted 15 July, 2020;
originally announced July 2020.
-
The designs and deformations of rigidly and flat-foldable quadrilateral mesh origami
Authors:
Fan Feng,
Xiangxin Dang,
Richard D. James,
Paul Plucinsky
Abstract:
Rigidly and flat-foldable quadrilateral mesh origami is the class of quadrilateral mesh crease patterns with one fundamental property: the patterns can be folded from flat to fully-folded flat by a continuous one-parameter family of piecewise affine deformations that do not stretch or bend the mesh-panels. In this work, we explicitly characterize the designs and deformations of all possible rigidl…
▽ More
Rigidly and flat-foldable quadrilateral mesh origami is the class of quadrilateral mesh crease patterns with one fundamental property: the patterns can be folded from flat to fully-folded flat by a continuous one-parameter family of piecewise affine deformations that do not stretch or bend the mesh-panels. In this work, we explicitly characterize the designs and deformations of all possible rigidly and flat-foldable quadrilateral mesh origami. Our key idea is a rigidity theorem (Theorem 3.1) that characterizes compatible crease patterns surrounding a single panel and enables us to march from panel to panel to compute the pattern and its corresponding deformations explicitly. The marching procedure is computationally efficient. So we use it to formulate the inverse problem: to design a crease pattern to achieve a targeted shape along the path of its rigidly and flat-foldable motion. The initial results on the inverse problem are promising and suggest a broadly useful engineering design strategy for shape-morphing with origami.
△ Less
Submitted 21 April, 2020; v1 submitted 28 March, 2020;
originally announced March 2020.
-
Branching of twins in shape memory alloys revisited
Authors:
Hanus Seiner,
Paul Plucinsky,
Vivekanand Dabade,
Barbora Benesova,
Richard D. James
Abstract:
We study the branching of twins appearing in shape memory alloys at the interface between austenite and martensite. In the framework of three-dimensional non-linear elasticity theory, we propose an explicit, low-energy construction of the branched microstructure, generally applicable to any shape memory material without restrictions on the symmetry class of martensite or on the geometric parameter…
▽ More
We study the branching of twins appearing in shape memory alloys at the interface between austenite and martensite. In the framework of three-dimensional non-linear elasticity theory, we propose an explicit, low-energy construction of the branched microstructure, generally applicable to any shape memory material without restrictions on the symmetry class of martensite or on the geometric parameters of the interface. We show that the suggested construction follows the expected energy scaling law, i.e., that (for the surface energy of the twins being sufficiently small) the branching leads to energy reduction. Furthermore, the construction can be modified to capture different features of experimentally observed microstructures without violating this scaling law. By using a numerical procedure, we demonstrate that the proposed construction is able to predict realistically the twin width and the number of branching generations in a Cu-Al-Ni single crystal.
△ Less
Submitted 11 October, 2019;
originally announced October 2019.
-
Bounds on the energy of a soft cubic ferromagnet with large magnetostriction
Authors:
Raghavendra Venkatraman,
Vivekanand Dabade,
Richard D. James
Abstract:
We complete the analysis initiated in [5] on the micromagnetics of cubic ferromagnets in which the role of magnetostriction is significant. We prove ansatz-free lower bounds for the scaling of the total micromagnetic energy including magnetostriction contribution, for a two-dimensional sample. This corresponds to the micromagnetic energy-per-unit-length of an infinitely thick sample. A consequence…
▽ More
We complete the analysis initiated in [5] on the micromagnetics of cubic ferromagnets in which the role of magnetostriction is significant. We prove ansatz-free lower bounds for the scaling of the total micromagnetic energy including magnetostriction contribution, for a two-dimensional sample. This corresponds to the micromagnetic energy-per-unit-length of an infinitely thick sample. A consequence of our analysis is an explanation of the multi-scale zig-zag Landau state patterns recently reported in single crystal Galfenol disks from an energetic viewpoint. Our proofs combines a number of well-developed techniques in energy-driven pattern formation with a recent regularity result for the kinetic formulation of the Eikonal equation of Ghiraldin and Lamy.
△ Less
Submitted 31 August, 2020; v1 submitted 13 June, 2019;
originally announced June 2019.
-
Tuning the Hysteresis of a Metal-Insulator Transition via Lattice Compatibility
Authors:
Y. G. Liang,
S. Lee,
H. S. Yu,
X. H. Zhang,
H. R. Zhang,
L. A. Bendersky,
Y. J. Liang,
P. Y. Zavalij,
X. Chen,
R. D. James,
I. Takeuchi
Abstract:
Structural phase transitions serve as the basis for many functional applications including shape memory alloys (SMAs), switches based on metal-insulator transitions (MITs), etc. In such materials, lattice incompatibility between phases often results in a thermal hysteresis, which is intimately tied to degradation of reversibility of the transformation. The non-linear theory of martensite suggests…
▽ More
Structural phase transitions serve as the basis for many functional applications including shape memory alloys (SMAs), switches based on metal-insulator transitions (MITs), etc. In such materials, lattice incompatibility between phases often results in a thermal hysteresis, which is intimately tied to degradation of reversibility of the transformation. The non-linear theory of martensite suggests that the hysteresis of a martensitic phase transformation is solely determined by the lattice constants, and the conditions proposed for geometrical compatibility have been successfully applied to minimizing the hysteresis in SMAs. In this work, we apply the non-linear theory to a strongly correlated oxide system (W doped VO2), and show that the hysteresis of the MIT in the system can be directly tuned by adjusting the lattice constants of the phases. The results underscore the profound influence structural compatibility has on intrinsic electronic properties, and indicate that the theory provides a universal guidance for optimizing phase transforming materials.
△ Less
Submitted 3 May, 2019;
originally announced May 2019.
-
Helical Miura Origami
Authors:
Fan Feng,
Paul Plucinsky,
Richard D. James
Abstract:
We characterize the phase-space of all Helical Miura Origami. These structures are obtained by taking a partially folded Miura parallelogram as the unit cell, applying a generic helical or rod group to the cell, and characterizing all the parameters that lead to a globally compatible origami structure. When such compatibility is achieved, the result is cylindrical-type origami that can be manufact…
▽ More
We characterize the phase-space of all Helical Miura Origami. These structures are obtained by taking a partially folded Miura parallelogram as the unit cell, applying a generic helical or rod group to the cell, and characterizing all the parameters that lead to a globally compatible origami structure. When such compatibility is achieved, the result is cylindrical-type origami that can be manufactured from a suitably designed flat tessellation and "rolled-up" by a rigidly foldable motion into a cylinder. We find that the closed Helical Miura Origami are generically rigid to deformations that preserve cylindrical symmetry, but multistable. We are inspired by the ways atomic structures deform [1] to develop two broad strategies for reconfigurability: motion by slip, which involves relaxing the closure condition; and motion by phase transformation, which exploits multistability. Taken together, these results provide a comprehensive description of the phase-space of cylindrical origami, as well as quantitative design guidance for their use as actuators or metamaterials that exploit twist, axial extension, radial expansion, and symmetry.
△ Less
Submitted 3 September, 2019; v1 submitted 13 February, 2019;
originally announced February 2019.
-
Origins of the transformability of Nickel-Titanium shape memory alloys
Authors:
Xian Chen,
Colin Ophus,
Chengyu Song,
Jim Ciston,
Sambit Das,
Yintao Song,
Yuriy Chumlyakov,
Andrew Minor,
Vikram Gavini,
Richard D. James
Abstract:
The near equiatomic NiTi alloy is the most successful shape memory alloy by a large margin. It is widely and increasingly used in biomedical devices. Yet, despite having a repeatable superelastic effect and excellent shape-memory, NiTi is very far from satisfying the conditions that characterize the most reversible phase transforming materials. Thus, the scientific reasons underlying its vast succ…
▽ More
The near equiatomic NiTi alloy is the most successful shape memory alloy by a large margin. It is widely and increasingly used in biomedical devices. Yet, despite having a repeatable superelastic effect and excellent shape-memory, NiTi is very far from satisfying the conditions that characterize the most reversible phase transforming materials. Thus, the scientific reasons underlying its vast success present an enigma. In this work, we perform rigorous mathematical derivation and accurate DFT calculation of transformation mechanisms to seek previously unrecognized twin-like defects that we term involution domains, and we observe them in real space in NiTi by the aberration-corrected scanning transmission electron microscopy. Involution domains lead to an additional 216 compatible interfaces between phases in NiTi, and we theorize that this feature contributes importantly to its reliability. They are expected to arise in other transformations and to alter the conventional interpretation of the mechanism of the martensitic transformation.
△ Less
Submitted 9 October, 2020; v1 submitted 18 January, 2019;
originally announced January 2019.
-
Phase transformations and compatibility in helical structures
Authors:
Fan Feng,
Paul Plucinsky,
Richard D. James
Abstract:
We systematically study phase transformations from one helical structure to another. Motivated in part by recent work that relates the presence of compatible interfaces with properties such as the hysteresis and reversibility of a phase transformation [35, 33, 12, 28], we give necessary and sufficient conditions on the structural parameters of two helical phases such that they are compatible. We s…
▽ More
We systematically study phase transformations from one helical structure to another. Motivated in part by recent work that relates the presence of compatible interfaces with properties such as the hysteresis and reversibility of a phase transformation [35, 33, 12, 28], we give necessary and sufficient conditions on the structural parameters of two helical phases such that they are compatible. We show that, locally, four types of compatible interface are possible: vertical, horizontal, helical and elliptical. We discuss the mobility of these interfaces and give examples of systems of interfaces that are mobile and could be used to fully transform a helical structure from one phase to another.
These results provide a basis for the tuning of helical structural parameters so as to achieve compatibility of phases. In the case of transformations in crystals, this kind of tuning has led to materials with exceptionally low hysteresis and dramatically improved resistance to transformational fatigue. Compatible helical transformations with low hysteresis and fatigue resistance would exhibit an unusual shape memory effect involving both twist and extension, and may have potential applications as new artificial muscles and actuators.
△ Less
Submitted 25 March, 2019; v1 submitted 17 September, 2018;
originally announced September 2018.
-
Phase Separation and Superparamagnetism in the Martensitic Phase of $Ni_{50-x}Co_{x}Mn_{40}Sn_{10}$
Authors:
S. Yuan,
P. L. Kuhns,
A. P. Reyes,
J. S. Brooks,
M. J. R. Hoch,
V. Srivastava,
R. D. James,
C. Leighton
Abstract:
$Ni_{50-x}Co_{x}Mn_{40}Sn_{10}$ shape memory alloys in the approximate range $5 \le x \le 10$ display desirable properties for applications as well as intriguing magnetism. These off-stoichiometric Heusler alloys undergo a martensitic phase transformation at a temperature $T_{M}…
▽ More
$Ni_{50-x}Co_{x}Mn_{40}Sn_{10}$ shape memory alloys in the approximate range $5 \le x \le 10$ display desirable properties for applications as well as intriguing magnetism. These off-stoichiometric Heusler alloys undergo a martensitic phase transformation at a temperature $T_{M}$ of 300 - 400 K, from ferromagnetic (F) to nonferromagnetic, with unusually low thermal hysteresis and a large change in magnetization. The low temperature magnetic structures in the martensitic phase of such alloys, which are distinctly inhomogeneous, are of great interest but are not well understood. Our present use of spin echo NMR, in the large hyperfine fields at $^{55}Mn$ sites, provides compelling evidence that nanoscale magnetic phase separation into F and antiferromagnetic (AF) regions occurs below $T_{M}$ in alloys with x in the range 0 to 7. At finite Co substitution the F regions are found to be of two distinct types, corresponding to high and low local concentrations of Co on Ni sites. Estimates of the size distributions of both the F and AF nanoregions have been made. At x = 7 the AF component is not long-range ordered, even below 4 K, and is quite different to the AF component found at x = 0; by x = 14 the F phase is completely dominant. Of particular interest, we find, for x = 7, that field cooling leads to dramatic changes in the AF regions. These findings provide insight into the origins of magnetic phase separation and superparamagnetism in these complex alloys, particularly their intrinsic exchange bias, which is of considerable current interest.
△ Less
Submitted 22 January, 2016;
originally announced January 2016.
-
Determination of the stretch tensor for structural transformations
Authors:
Xian Chen,
Yintao Song,
Nobumichi Tamura,
Richard D. James
Abstract:
The transformation stretch tensor plays an essential role in the evaluation of conditions of compatibility between phases and the use of the Cauchy-Born rule. This tensor is difficult to measure directly from experiment. We give an algorithm for the determination of the transformation stretch tensor from x-ray measurements of structure and lattice parameters. When evaluated on some traditional and…
▽ More
The transformation stretch tensor plays an essential role in the evaluation of conditions of compatibility between phases and the use of the Cauchy-Born rule. This tensor is difficult to measure directly from experiment. We give an algorithm for the determination of the transformation stretch tensor from x-ray measurements of structure and lattice parameters. When evaluated on some traditional and emerging phase transformations the algorithm gives unexpected results.
△ Less
Submitted 21 January, 2015;
originally announced January 2015.
-
A spectral scheme for Kohn-Sham density functional theory of clusters
Authors:
Amartya S. Banerjee,
Ryan S. Elliott,
Richard D. James
Abstract:
Starting from the observation that one of the most successful methods for solving the Kohn-Sham equations for periodic systems -- the plane-wave method -- is a spectral method based on eigenfunction expansion, we formulate a spectral method designed towards solving the Kohn-Sham equations for clusters. This allows for efficient calculation of the electronic structure of clusters (and molecules) wi…
▽ More
Starting from the observation that one of the most successful methods for solving the Kohn-Sham equations for periodic systems -- the plane-wave method -- is a spectral method based on eigenfunction expansion, we formulate a spectral method designed towards solving the Kohn-Sham equations for clusters. This allows for efficient calculation of the electronic structure of clusters (and molecules) with high accuracy and systematic convergence properties without the need for any artificial periodicity. The basis functions in this method form a complete orthonormal set and are expressible in terms of spherical harmonics and spherical Bessel functions. Computation of the occupied eigenstates of the discretized Kohn-Sham Hamiltonian is carried out using a combination of preconditioned block eigensolvers and Chebyshev polynomial filter accelerated subspace iterations. Several algorithmic and computational aspects of the method, including computation of the electrostatics terms and parallelization are discussed. We have implemented these methods and algorithms into an efficient and reliable package called ClusterES (Cluster Electronic Structure). A variety of benchmark calculations employing local and non-local pseudopotentials are carried out using our package and the results are compared to the literature. Convergence properties of the basis set are discussed through numerical examples. Computations involving large systems that contain thousands of electrons are demonstrated to highlight the efficacy of our methodology. The use of our method to study clusters with arbitrary point group symmetries is briefly discussed.
△ Less
Submitted 25 November, 2014; v1 submitted 14 April, 2014;
originally announced April 2014.
-
Study of the cofactor conditions: conditions of supercompatibility between phases
Authors:
Xian Chen,
Vijay Srivastava,
Vivekanand Dabade,
Richard D. James
Abstract:
The cofactor conditions, introduced in James and Zhang, are conditions of compatibility between phases in martensitic materials. They consist of three subconditions: i) the condition that the middle principal stretch of the transformation stretch tensor $\mathbf U$ is unity ($λ_2 = 1$), ii) the condition $\mathbf a \cdot \mathbf U\, \cof (\mathbf U^2 - \mathbf I)\mathbf n = 0$, where the vectors…
▽ More
The cofactor conditions, introduced in James and Zhang, are conditions of compatibility between phases in martensitic materials. They consist of three subconditions: i) the condition that the middle principal stretch of the transformation stretch tensor $\mathbf U$ is unity ($λ_2 = 1$), ii) the condition $\mathbf a \cdot \mathbf U\, \cof (\mathbf U^2 - \mathbf I)\mathbf n = 0$, where the vectors $\mathbf a$ and $\mathbf n$ are certain vectors arising in the specification of the twin system, and iii) the inequality ${\rm tr} \mathbf U^2 + \det \mathbf U^2 -(1/4) |\mathbf a|^2 |\mathbf n|^2\ge 2$. Together, these conditions are necessary and sufficient for the equations of the crystallographic theory of martensite to be satisfied for the given twin system but for any volume fraction f of the twins, $0 \le f \le 1$. This contrasts sharply with the generic solutions of the crystallographic theory which have at most two such volume fractions for a given twin system of the form $f^*$ and $1-f^*$. In this paper we simplify the form of the cofactor conditions, we give their specific forms for various symmetries and twin types, we clarify the extent to which the satisfaction of the cofactor conditions for one twin system implies its satisfaction for other twin systems. In particular, we prove that the satisfaction of the cofactor conditions for either Type I or Type II twins implies that there are solutions of the crystallographic theory using these twins that have no elastic transition layer. We show that the latter further implies macroscopically curved, transition-layer-free austenite/martensite interfaces for Type I twins, and planar transition-layer-free interfaces for Type II twins which nevertheless permit significant flexibility of the martensite. We identify some real material systems nearly satisfying the cofactor conditions.
△ Less
Submitted 22 July, 2013;
originally announced July 2013.
