-
Swimming mode determines how well mesoscale swimmers shield their odor in turbulence
Authors:
Martin James,
Francesco Viola,
Agnese Seminara
Abstract:
Marine organisms manipulate their surrounding flow through their swimming dynamics, which affects the transport of their own odor cues. We demonstrate by direct numerical simulations how a group of mesoscale swimmers immersed in a turbulent flow alters the shape of the odor plume they release in the water. Odor mixing is enhanced by increased velocity fluctuations and a swimmer-induced flow circul…
▽ More
Marine organisms manipulate their surrounding flow through their swimming dynamics, which affects the transport of their own odor cues. We demonstrate by direct numerical simulations how a group of mesoscale swimmers immersed in a turbulent flow alters the shape of the odor plume they release in the water. Odor mixing is enhanced by increased velocity fluctuations and a swimmer-induced flow circulation which widen the odor plume at close range while speeding up dilution of the chemical trace. Beyond a short-range increase in the likelihood of being detected, swimming considerably reduces detections with effects that can persist at distances of the order of ten times the size of the group or more. We find that puller-like swimmers are more effective at olfactory shielding than pusher-like swimmers. We trace this difference back to the dynamics at the swimmer location, which tends to trap odor at the source for pushers and to dilute it for pullers. Olfactory shielding is robust to changes in the conditions, and is more pronounced for weak turbulent Reynolds numbers and large swimmer Reynolds numbers. Our results suggest that olfactory shielding may play a role in the emergence of different swimming modalities by marine organisms.
△ Less
Submitted 1 January, 2025;
originally announced January 2025.
-
Breaking the mold: overcoming the time constraints of molecular dynamics on general-purpose hardware
Authors:
Danny Perez,
Aidan Thompson,
Stan Moore,
Tomas Oppelstrup,
Ilya Sharapov,
Kylee Santos,
Amirali Sharifian,
Delyan Z. Kalchev,
Robert Schreiber,
Scott Pakin,
Edgar A. Leon,
James H. Laros III,
Michael James,
Sivasankaran Rajamanickam
Abstract:
The evolution of molecular dynamics (MD) simulations has been intimately linked to that of computing hardware. For decades following the creation of MD, simulations have improved with computing power along the three principal dimensions of accuracy, atom count (spatial scale), and duration (temporal scale). Since the mid-2000s, computer platforms have however failed to provide strong scaling for M…
▽ More
The evolution of molecular dynamics (MD) simulations has been intimately linked to that of computing hardware. For decades following the creation of MD, simulations have improved with computing power along the three principal dimensions of accuracy, atom count (spatial scale), and duration (temporal scale). Since the mid-2000s, computer platforms have however failed to provide strong scaling for MD as scale-out CPU and GPU platforms that provide substantial increases to spatial scale do not lead to proportional increases in temporal scale. Important scientific problems therefore remained inaccessible to direct simulation, prompting the development of increasingly sophisticated algorithms that present significant complexity, accuracy, and efficiency challenges. While bespoke MD-only hardware solutions have provided a path to longer timescales for specific physical systems, their impact on the broader community has been mitigated by their limited adaptability to new methods and potentials. In this work, we show that a novel computing architecture, the Cerebras Wafer Scale Engine, completely alters the scaling path by delivering unprecedentedly high simulation rates up to 1.144M steps/second for 200,000 atoms whose interactions are described by an Embedded Atom Method potential. This enables direct simulations of the evolution of materials using general-purpose programmable hardware over millisecond timescales, dramatically increasing the space of direct MD simulations that can be carried out.
△ Less
Submitted 15 November, 2024;
originally announced November 2024.
-
Intermittency, fluctuations and maximal chaos in an emergent universal state of active turbulence
Authors:
Siddhartha Mukherjee,
Rahul K. Singh,
Martin James,
Samriddhi Sankar Ray
Abstract:
A hydrodynamic model of active, low Reynolds number suspensions, shows the emergence of an asymptotic state with a universal spectral scaling and non-Gaussian (intermittent) fluctuations in the velocity field. Such states arise when these systems are pushed beyond a critical level of activity and show features akin to high Reynolds number, inertial turbulence. We provide compelling numerical and a…
▽ More
A hydrodynamic model of active, low Reynolds number suspensions, shows the emergence of an asymptotic state with a universal spectral scaling and non-Gaussian (intermittent) fluctuations in the velocity field. Such states arise when these systems are pushed beyond a critical level of activity and show features akin to high Reynolds number, inertial turbulence. We provide compelling numerical and analytical evidence for the existence of such a transition at a critical value of activity and further show that the maximally chaotic states are tied to this transition.
△ Less
Submitted 25 July, 2022;
originally announced July 2022.
-
Anomalous diffusion and Lévy walks distinguish active from inertial turbulence
Authors:
Siddhartha Mukherjee,
Rahul K. Singh,
Martin James,
Samriddhi Sankar Ray
Abstract:
Bacterial swarms display intriguing dynamical states like active turbulence. Using a hydrodynamic model we now show that such dense active suspensions manifest super-diffusion, via Lévy walks, which masquerades as a crossover from ballistic to diffusive scaling in measurements of mean-squared-displacements, and is tied to the emergence of hitherto undetected oscillatory streaks in the flow. Thus,…
▽ More
Bacterial swarms display intriguing dynamical states like active turbulence. Using a hydrodynamic model we now show that such dense active suspensions manifest super-diffusion, via Lévy walks, which masquerades as a crossover from ballistic to diffusive scaling in measurements of mean-squared-displacements, and is tied to the emergence of hitherto undetected oscillatory streaks in the flow. Thus, while laying the theoretical framework of an emergent advantageous strategy in the collective behaviour of microorganisms, our study underlines the essential differences between active and inertial turbulence.
△ Less
Submitted 13 September, 2021; v1 submitted 17 May, 2021;
originally announced May 2021.
-
Emergence and melting of active vortex crystals
Authors:
Martin James,
Dominik Anton Suchla,
Jörn Dunkel,
Michael Wilczek
Abstract:
Melting of two-dimensional (2D) equilibrium crystals, from superconducting vortex lattices to colloidal structures, is a complex phenomenon characterized by the sequential loss of positional and orientational order. Whereas melting processes in passive systems are typically triggered by external heat injection, active matter crystals can self-assemble and melt into an active fluid by virtue of the…
▽ More
Melting of two-dimensional (2D) equilibrium crystals, from superconducting vortex lattices to colloidal structures, is a complex phenomenon characterized by the sequential loss of positional and orientational order. Whereas melting processes in passive systems are typically triggered by external heat injection, active matter crystals can self-assemble and melt into an active fluid by virtue of their intrinsic motility and inherent non-equilibrium stresses. Emergent crystal-like order has been observed in recent experiments on suspensions of swimming sperm cells, fast-moving bacteria, Janus colloids, and in embryonic tissues. Yet, despite recent progress in the theoretical description of such systems, the non-equilibrium physics of active crystallization and melting processes is not well understood. Here, we establish the emergence and investigate the melting of self-organized vortex crystals in 2D active fluids using an experimentally validated generalized Toner-Tu theory. Performing hydrodynamic simulations at an unprecedented scale, we identify two distinctly different melting scenarios: a hysteretic discontinuous phase transition and melting through an intermediary hexatic phase, both of which can be controlled by self-propulsion and active stresses. Our analysis further reveals intriguing transient features of active vortex crystals including meta-stable superstructures of opposite spin polarity. Generally, these results highlight the differences and similarities between crystalline phases in active fluids and their equilibrium counterparts.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Tuning Interparticle Hydrogen Bonding in Shear-Jamming Suspensions: Kinetic Effects and Consequences for Tribology and Rheology
Authors:
Nicole M. James,
Chiao-Peng Hsu,
Nicholas D. Spencer,
Heinrich M. Jaeger,
Lucio Isa
Abstract:
The shear-jamming of dense suspensions can be strongly affected by molecular-scale interactions between particles, e.g. by chemically controlling their propensity for hydrogen bonding. However, hydrogen bonding not only enhances interparticle friction, a critical parameter for shear jamming, but also introduces (reversible) adhesion, whose interplay with friction in shear-jamming systems has so fa…
▽ More
The shear-jamming of dense suspensions can be strongly affected by molecular-scale interactions between particles, e.g. by chemically controlling their propensity for hydrogen bonding. However, hydrogen bonding not only enhances interparticle friction, a critical parameter for shear jamming, but also introduces (reversible) adhesion, whose interplay with friction in shear-jamming systems has so far remained unclear. Here, we present atomic force microscopy studies to assess interparticle adhesion, its relationship to friction, and how these attributes are influenced by urea, a molecule that interferes with hydrogen bonding. We characterize the kinetics of this process with nuclear magnetic resonance, relating it to the time dependence of the macroscopic flow behavior with rheological measurements. We find that time-dependent urea sorption reduces friction and adhesion, causing a shift in the shear-jamming onset. These results extend our mechanistic understanding of chemical effects on the nature of shear jamming, promising new avenues for fundamental studies and applications alike.
△ Less
Submitted 15 January, 2019;
originally announced January 2019.
-
Controlling Shear Jamming in Dense Suspensions via the Particle Aspect Ratio
Authors:
Nicole M. James,
Huayue Xue,
Medha Goyal,
Heinrich M. Jaeger
Abstract:
Dense suspension of particles in a liquid exhibit rich, non-Newtonian behaviors such as shear thickening and shear jamming. Shear thickening is known to be enhanced by increasing the particles' frictional interactions and also by making their shape more anisotropic. For shear jamming, however, only the role of interparticle friction has been investigated, while the effect of changing particle shap…
▽ More
Dense suspension of particles in a liquid exhibit rich, non-Newtonian behaviors such as shear thickening and shear jamming. Shear thickening is known to be enhanced by increasing the particles' frictional interactions and also by making their shape more anisotropic. For shear jamming, however, only the role of interparticle friction has been investigated, while the effect of changing particle shape has so far not been studied systematically. To address this we here synthesize smooth silica particles and design the particle surface chemistry to generate strong frictional interactions such that dense, aqueous suspensions of spheres exhibit pronounced shear jamming. We then vary particle aspect ratio from $Γ$=1 (spheres) to $Γ$=11 (slender rods), and perform rheological measurements to determine the effect of particle anisotropy on the onset of shear jamming and its precursor, discontinuous shear thickening. Keeping the frictional interactions fixed, we find that increasing aspect ratio significantly reduces $φ_m$, the minimum particle packing fraction at which shear jamming can be observed, to values as low $φ_m=33\%$ for $Γ$=11. The ability to independently control particle interactions due to friction and shape anisotropy yields fundamental insights about the thickening and jamming capabilities of suspensions and provides a framework to rationally design shear jamming characteristics.
△ Less
Submitted 13 January, 2019;
originally announced January 2019.
-
Stress controlled rheology of dense suspensions using transient flows
Authors:
Endao Han,
Nicole M. James,
Heinrich M. Jaeger
Abstract:
Dense suspensions of hard particles in a Newtonian liquid can be jammed by shear when the applied stress exceeds a certain threshold. However, this jamming transition from a fluid into a solidified state cannot be probed with conventional steady-state rheology because the stress distribution inside the material cannot be controlled with sufficient precision. Here we introduce and validate a method…
▽ More
Dense suspensions of hard particles in a Newtonian liquid can be jammed by shear when the applied stress exceeds a certain threshold. However, this jamming transition from a fluid into a solidified state cannot be probed with conventional steady-state rheology because the stress distribution inside the material cannot be controlled with sufficient precision. Here we introduce and validate a method that overcomes this obstacle. Rapidly propagating shear fronts are generated and used to establish well-controlled local stress conditions that sweep across the material. Exploiting such transient flows, we are able to track how a dense suspension approaches its shear jammed state dynamically, and can quantitatively map out the onset stress for solidification in a state diagram.
△ Less
Submitted 28 October, 2018;
originally announced October 2018.
-
Collisional Charging of Individual Sub-Millimeter Particles: Using Ultrasonic Levitation to Initiate and Track Charge Transfer
Authors:
Victor Lee,
Nicole M. James,
Scott Waitukaitis,
Heinrich M. Jaeger
Abstract:
Electrostatic charging of insulating fine particles can be responsible for numerous phenomena ranging from lightning in volcanic plumes to dust explosions. However, even basic aspects of how fine particles become charged are still unclear. Studying particle charging is challenging because it usually involves the complexities associated with many particle collisions. To address these issues we intr…
▽ More
Electrostatic charging of insulating fine particles can be responsible for numerous phenomena ranging from lightning in volcanic plumes to dust explosions. However, even basic aspects of how fine particles become charged are still unclear. Studying particle charging is challenging because it usually involves the complexities associated with many particle collisions. To address these issues we introduce a method based on acoustic levitation, which makes it possible to initiate sequences of repeated collisions of a single sub-millimeter particle with a flat plate, and to precisely measure the particle charge in-situ after each collision. We show that collisional charge transfer between insulators is dependent on the hydrophobicity of the contacting surfaces. We use glass, which we modify by attaching nonpolar molecules to the particle, the plate, or both. We find that hydrophilic surfaces develop significant positive charges after contacting hydrophobic surfaces. Moreover, we demonstrate that charging between a hydrophilic and a hydrophobic surface is suppressed in an acidic environment and enhanced in a basic one. Application of an electric field during each collision is found to modify the charge transfer, again depending on surface hydrophobicity. We discuss these results within the context of contact charging due to ion transfer and show that they lend strong support to OH- ions as the charge carriers.
△ Less
Submitted 28 January, 2018;
originally announced January 2018.
-
Characterisation of polystyrene coatings after plasma immersion ion implantation and adsorption of protein
Authors:
S Dekker,
A Kondyurin,
B Steel,
M M M Bilek,
D R McKenzie,
M James
Abstract:
A polystyrene film spun onto polished silicon substrates was implanted with either nitrogen or argon ions using plasma immersion ion implantation (PIII) and subsequently investigated by X-ray and neutron reflectometry, UV-VIS and FTIR ellipsometry, as well as by FTIR and Raman spectroscopy. The depth profile of the densified carbon structures resulting from the ion collision cascades in the polyst…
▽ More
A polystyrene film spun onto polished silicon substrates was implanted with either nitrogen or argon ions using plasma immersion ion implantation (PIII) and subsequently investigated by X-ray and neutron reflectometry, UV-VIS and FTIR ellipsometry, as well as by FTIR and Raman spectroscopy. The depth profile of the densified carbon structures resulting from the ion collision cascades in the polystyrene coating are clearly observed by both X-ray and neutron reflectometry. Argon ions produce a higher density modified layer at a shallower depth than nitrogen ions. The thickness measured for these graded layers agrees with the expected depths of ion implantation as calculated by SRIM. The sensitivity of X-ray and neutron reflectometry allows resolution of density and hydrogen content gradients within the graphitized layers. The treated layers were found to covalently immobilized protein directly from solution. The tropoelastin protein monolayers immobilized on the surface were characterized. Tropoelastin remained on the surface after SDS washing.
△ Less
Submitted 10 April, 2012;
originally announced April 2012.
-
Frequency Conversion: Side-band cooling, state-swapping, and coherent control of mechanical resonators
Authors:
Kurt Jacobs,
Hendra I. Nurdin,
Frederick W. Strauch,
Matthew James
Abstract:
Sideband cooling is a technique that potentially allows mechanical resonators to be prepared in their ground states, important for future applications in quantum technologies. Tian has recently shown that side-band cooling can be implemented by modulating the coupling between a nano-resonator and a superconducting oscillator, a process of frequency conversion [L. Tian, PRB 79, 193407 (2009)]. Whil…
▽ More
Sideband cooling is a technique that potentially allows mechanical resonators to be prepared in their ground states, important for future applications in quantum technologies. Tian has recently shown that side-band cooling can be implemented by modulating the coupling between a nano-resonator and a superconducting oscillator, a process of frequency conversion [L. Tian, PRB 79, 193407 (2009)]. While side-band cooling is usually treated in the steady-state regime, the effective resonant coupling will also generate near perfect state-swapping from the superconductor to the mechanical resonator. We perform numerical simulations of this system, examining the ground-state cooling achieved by the state-swapping. Further, we show that the superconducting oscillator can be used to control the amplitude and phase of the resonator, while simultaneously cooling it, and thus act as a coherent "quantum feedback controller".
△ Less
Submitted 2 July, 2010; v1 submitted 12 March, 2010;
originally announced March 2010.
-
Work function changes in the double layered manganite La1.2Sr1.8Mn2O7
Authors:
K. Schulte,
M. A. James,
L. H. Tjeng,
P. G. Steeneken,
G. A. Sawatzky,
R. Suryanarayanan,
G. Dhalenne,
A. Revcolevschi
Abstract:
We have investigated the behaviour of the work function of La1.2Sr1.8Mn2O7 as a function of temperature by means of photoemission. We found a decrease of 55 +/- 10 meV in going from 60 K to just above the Curie temperature (125 K) of the sample. Above T_C the work function appears to be roughly constant. Our results are exactly opposite to the work function changes calculated from the double-exc…
▽ More
We have investigated the behaviour of the work function of La1.2Sr1.8Mn2O7 as a function of temperature by means of photoemission. We found a decrease of 55 +/- 10 meV in going from 60 K to just above the Curie temperature (125 K) of the sample. Above T_C the work function appears to be roughly constant. Our results are exactly opposite to the work function changes calculated from the double-exchange model by Furukawa, but are consistent with other measurements. The disagreement with double-exchange can be explained using a general thermodynamic relation valid for second order transitions and including the extra processes involved in the manganites besides double-exchange interaction.
△ Less
Submitted 28 May, 2001;
originally announced May 2001.
-
Does EELS haunt your photoemission measurements?
Authors:
K. Schulte,
M. A. James,
P. G. Steeneken,
G. A. Sawatzky,
R. Suryanarayanan,
G. Dhalenne,
A. Revcolevschi
Abstract:
It has been argued in a recent paper by R. Joynt (R. Joynt, Science 284, p 777 (1999)) that in the case of poorly conducting solids the photoemission spectrum close to the Fermi Energy may be strongly influenced by extrinsic loss processes similar to those occurring in High Resolution Electron Energy Loss Spectroscopy (HR-EELS), thereby obscuring information concerning the density of states or o…
▽ More
It has been argued in a recent paper by R. Joynt (R. Joynt, Science 284, p 777 (1999)) that in the case of poorly conducting solids the photoemission spectrum close to the Fermi Energy may be strongly influenced by extrinsic loss processes similar to those occurring in High Resolution Electron Energy Loss Spectroscopy (HR-EELS), thereby obscuring information concerning the density of states or one electron Green's function sought for. In this paper we present a number of arguments, both theoretical and experimental, that demonstrate that energy loss processes occurring once the electron is outside the solid, contribute only weakly to the spectrum and can in most cases be either neglected or treated as a weak structureless background.
△ Less
Submitted 30 October, 2000;
originally announced October 2000.
