-
Enhancement of photocatalytic performance of V2O5 by rare-earth ions doping, synthesized by facile hydrothermal technique
Authors:
M. H. Kabir,
M. Z. Hossain,
M. A. Jalil,
M. M. Hossain,
M. A. Ali,
M. U. Khandaker,
D. Jana,
Md. M. Rahman,
M. K. Hossain,
M. M. Uddin
Abstract:
The rare-earth (RE) elements [Holmium (Ho) and Ytterbium (Yb)] doped vanadium pentoxide (V2O5) with a series of doping concentrations (1 mol.%, 3 mol.%, and 5 mol.%) have been successfully synthesized using environment-friendly facile hydrothermal method. The effect of RE ions on the photocatalytic efficiency of doped V2O5 has also been analyzed. The stable orthorhombic crystal structure of doped…
▽ More
The rare-earth (RE) elements [Holmium (Ho) and Ytterbium (Yb)] doped vanadium pentoxide (V2O5) with a series of doping concentrations (1 mol.%, 3 mol.%, and 5 mol.%) have been successfully synthesized using environment-friendly facile hydrothermal method. The effect of RE ions on the photocatalytic efficiency of doped V2O5 has also been analyzed. The stable orthorhombic crystal structure of doped V2O5 confirms by the X-ray diffraction with no secondary phase, and high-stressed conditions are generated for the 3 mol.%. The crystallite size, strain, and dislocation density are calculated to perceive the doping effect on the bare V2O5. The optical characteristics have been measured using UV-vis spectroscopy. The absorptions are found to be increased with increasing doping concentrations; however, the bandgap remains in the visible range. The photocatalytic properties are examined for the compounds with varying pH, and it is observed that higher efficiency is exhibited for the pH 7 and catalyst concentration 500 ppm. The highest degradation efficiency is found to be 93% and 95% for the 3 mol.% of Ho and Yb-doped V2O5 samples within 2 hours, respectively. It is elucidated that the RE ions significantly impact the catalytic behavior of V2O5, and the mechanism behind these extraordinary efficiencies has been explained thoroughly.
△ Less
Submitted 16 January, 2023;
originally announced January 2023.
-
Impact of reaction temperatures on the particle size of V2O5 synthesized by facile hydrothermal technique and their auspicious photocatalytic performance in dye degradation
Authors:
M. A. Jalil,
M. N. I. Khan,
S. Mandal,
F. -U. -Z. Chowdhury,
M. M. Hossain,
D. Jana,
M. S. Alam,
M. M. Uddin
Abstract:
In this study, a complete study of the effect of hydrothermal reaction temperatures on the synthesis and physical properties of V2O5 using the green facile mild hydrothermal method has been performed with six different temperatures 100 °C to 200 °C, in the step of 20 °C. . The XRD pattern confirm the stable orthorhombic crystal structure of the synthesized samples at all reaction temperatures. The…
▽ More
In this study, a complete study of the effect of hydrothermal reaction temperatures on the synthesis and physical properties of V2O5 using the green facile mild hydrothermal method has been performed with six different temperatures 100 °C to 200 °C, in the step of 20 °C. . The XRD pattern confirm the stable orthorhombic crystal structure of the synthesized samples at all reaction temperatures. The SEM and TEM images demonstrate the particle-like morphology, and these characterizations affirmed that the particles size became larger with the increase of reaction temperatures. The FTIR analysis is employed to study the functional groups, and the obtained results are consistent with the XRD analysis. The bandgap has been estimated at various reaction temperatures using UV-vis diffuse reflectance spectra (UV-DRS) and was found to be varied 2.09 eV to 2.15 eV that are suitable range to absorb a significant amount of visible light. The photocatalysis of methylene blue (MB) with synthesized samples has been accomplished to investigate photocatalytic efficiency. The pure V2O5 synthesized at lower reaction temperature (100 °C) possess a lower bandgap and, accordingly, higher photocatalytic efficiency.
△ Less
Submitted 9 May, 2022;
originally announced May 2022.
-
Enhanced photocatalytic dye degradation and hydrogen production ability of Bi$_{25}$FeO$_{40}$-rGO nanocomposite and mechanism insight
Authors:
M. A. Basith,
Ragib Ahsan,
Ishrat Zarin,
M. A. Jalil
Abstract:
A comprehensive comparison between Bi$_{25}$FeO$_{40}$-reduced graphene oxide(rGO) nanocomposite and BiFeO$_{3}$-rGO nanocomposite has been performed to investigate their photocatalytic abilities in degradation of Rhodamine B dye and generation of hydrogen by water-splitting. The hydrothermal technique adapted for synthesis of the nanocomposites provides a versatile temperature-controlled phase se…
▽ More
A comprehensive comparison between Bi$_{25}$FeO$_{40}$-reduced graphene oxide(rGO) nanocomposite and BiFeO$_{3}$-rGO nanocomposite has been performed to investigate their photocatalytic abilities in degradation of Rhodamine B dye and generation of hydrogen by water-splitting. The hydrothermal technique adapted for synthesis of the nanocomposites provides a versatile temperature-controlled phase selection between perovskite BiFeO$_{3}$ and sillenite Bi$_{25}$FeO$_{40}$. Both perovskite and sillenite structured nanocomposites are stable and exhibit considerably higher photocatalytic ability over pure BiFeO$_{3}$ nanoparticles and commercially available Degussa P25 titania. Notably, Bi$_{25}$FeO$_{40}$- rGO nanocomposite has demonstrated superior photocatalytic ability and stability under visible light irradiation than that of BiFeO$_{3}$-rGO nanocomposite. The possible mechanism behind the superior photocatalytic performance of Bi$_{25}$FeO$_{40}$-rGO nanocomposite has been critically discussed.
△ Less
Submitted 5 February, 2022;
originally announced February 2022.
-
The 10% Gd and Ti co-doped BiFeO$_3$: A promising multiferroic material
Authors:
M. A. Basith,
Areef Billah,
M A Jalil,
Nilufar Yesmin,
Mashnoon Alam Sakib,
Emran Khan Ashik,
S. M. Enamul Hoque Yousuf,
Sayeed Shafayet Chowdhury,
Md. Sarowar Hossain,
Shakhawat H. Firoz,
Bashir Ahmmad
Abstract:
In this investigation, undoped BiFeO$_3$, Gd doped Bi$_{0.9}$Gd$_{0.1}$FeO$_3$, and Gd-Ti co-doped Bi$_{0.9}$Gd$_{0.1}$Fe$_{1-x}$Ti$_x$O$_3$ (x = 0.10, 0.20) materials were synthesized to report their multiferroic properties. The structural analysis and phase identification of these multiferroic ceramics were performed using Rietveld refinement. The Rietveld analysis has confirmed the high phase p…
▽ More
In this investigation, undoped BiFeO$_3$, Gd doped Bi$_{0.9}$Gd$_{0.1}$FeO$_3$, and Gd-Ti co-doped Bi$_{0.9}$Gd$_{0.1}$Fe$_{1-x}$Ti$_x$O$_3$ (x = 0.10, 0.20) materials were synthesized to report their multiferroic properties. The structural analysis and phase identification of these multiferroic ceramics were performed using Rietveld refinement. The Rietveld analysis has confirmed the high phase purity of the 10% Gd-Ti co-doped Bi$_{0.9}$Gd$_{0.1}$Fe$_{0.9}$Ti$_{0.1}$O$_3$ sample compared to that of other compositions under investigation. The major phase of this particular composition is of rhombohedral \textit{R3c} type structure (wt% $>99\%$) with negligible amount of impurity phases. In terms of characterization, we address magnetic properties of this co-doped ceramic system by applying substantially higher magnetic fields than that applied in previously reported investigations. The dependence of temperature and maximum applied magnetic fields on their magnetization behavior have also been investigated. Additionally, the leakage current density has been measured to explore its effect on the ferroelectric properties of this multiferroic system. The outcome of this investigation suggests that the substitution of 10% Gd and Ti in place of Bi and Fe, respectively, in BiFeO$_3$ significantly enhances its multiferroic properties. The improved properties of this specific composition is associated with homogeneous reduced grain size, significant suppression of impurity phases and reduction in leakage current density which is further asserted by polarization vs. electric field hysteresis loop measurements.
△ Less
Submitted 3 October, 2016;
originally announced October 2016.
-
Large difference between the magnetic properties of Ba and Ti co-doped BiFeO$_3$ bulk materials and their corresponding nanoparticles prepared by ultrasonication
Authors:
Bashir Ahmmad,
Kensaku Kanomata,
Kunihiro Koike,
Shigeru Kubota,
Hiroaki Kato,
Fumihiko Hirose,
Areef Billah,
M. A. Jalil,
M. A. Basith
Abstract:
The ceramic pellets of the nominal compositions Bi$_{0.7}$Ba$_{0.3}$Fe$_{1-x}$Ti$_x$O$_3$ (x = 0.00-0.20) were prepared initially by standard solid state reaction technique. The pellets were then ground into micrometer-sized powders and mixed with isopropanol in an ultrasonic bath to prepare nanoparticles. The X-ray diffraction patterns demonstrate the presence of a significant number of impurity…
▽ More
The ceramic pellets of the nominal compositions Bi$_{0.7}$Ba$_{0.3}$Fe$_{1-x}$Ti$_x$O$_3$ (x = 0.00-0.20) were prepared initially by standard solid state reaction technique. The pellets were then ground into micrometer-sized powders and mixed with isopropanol in an ultrasonic bath to prepare nanoparticles. The X-ray diffraction patterns demonstrate the presence of a significant number of impurity phases in bulk powder materials. Interestingly, these secondary phases were completely removed due to the sonication of these bulk powder materials for 60 minutes. The field and temperature dependent magnetization measurements exhibited significant difference between the magnetic properties of the bulk materials and their corresponding nanoparticles. We anticipate that the large difference in the magnetic behavior may be associated with the presence and absence of secondary impurity phases in the bulk materials and their corresponding nanoparticles, respectively. The leakage current density of the bulk materials was also found to suppress in the ultrasonically prepared nanoparticles compared to that of bulk counterparts.
△ Less
Submitted 28 April, 2016;
originally announced April 2016.