Showing 1–50 of 89 results for author: Jaeger, H M

Non-reciprocity and multibody interactions in acoustically levitated particle systems: A three body problem

Authors: Brady Wu, Qinghao Mao, Bryan VanSaders, Heinrich M. Jaeger

Abstract: In active fluids and active solids the constituents individually generate movement by each extracting energy from their environment or from their own source. Non-reciprocal interactions among these active constituents then enable novel collective behavior that often can be strikingly counterintuitive. However, non-reciprocity in these cases typically requires that the interacting bodies have diffe… ▽ More In active fluids and active solids the constituents individually generate movement by each extracting energy from their environment or from their own source. Non-reciprocal interactions among these active constituents then enable novel collective behavior that often can be strikingly counterintuitive. However, non-reciprocity in these cases typically requires that the interacting bodies have different physical properties or it needs to be programmed explicitly into all pairwise interactions. Here we show that collective activity in a driven system can emerge spontaneously through multibody nonreciprocal forces, even if all bodies are individually non-active and have identical properties. We demonstrate this with as few as three identical spheres, acoustically levitated in air, which exhibit collective activity as they interact through non-pairwise forces: similar to the classic gravitational three-body problem, the interaction between two spheres depends sensitively on the relative position of the third sphere. Non-reciprocity arises naturally from both near-field sound scattering and microstreaming forces among the spheres. The underdamped dynamics in air furthermore make it possible to go beyond collective center-of-mass propulsion or rotation and observe internal, engine-like reconfigurations that follow limit cycles. These findings open up new possibilities for self-assembly, where now multibody interactions not only determine the resulting structure but also drive the spontaneously emerging dynamics. △ Less

Submitted 15 March, 2025; originally announced March 2025.

Dense suspensions as trainable rheological metafluids

Authors: Hojin Kim, Samantha M. Livermore, Stuart J. Rowan, Heinrich M. Jaeger

Abstract: Memory-forming properties introduce a new paradigm to the design of adaptive materials. In dense suspensions, an adaptive response is enabled by non-Newtonian rheology; however, typical suspensions have little memory, which implies rapid cessation of any adapted behavior. Here we show how multiple adaptive responses can be achieved by designing suspensions where different stress levels trigger dif… ▽ More Memory-forming properties introduce a new paradigm to the design of adaptive materials. In dense suspensions, an adaptive response is enabled by non-Newtonian rheology; however, typical suspensions have little memory, which implies rapid cessation of any adapted behavior. Here we show how multiple adaptive responses can be achieved by designing suspensions where different stress levels trigger different memories. This is enabled by the interplay of interactions based on frictional contact and dynamic chemical bridging. These two interactions lead to novel rheology with several well-delineated shear thinning and thickening regimes, which enable stress-activated memories associated with opposite time-dependent trends. As a result, in response to different stress levels, the suspension can evolve by either softening or stiffening and is trainable, exhibiting targeted viscosity and energy dissipation with repeated low-velocity impact. Such behavior, usually associated with mechanical metamaterials, suggests that dense suspensions with multiple memories can be viewed as trainable rheological metafluids. △ Less

Submitted 12 March, 2025; originally announced March 2025.

On the addition of micron-size intruders in a shear-thickening suspension of nanoparticles

Authors: Alice Pelosse, Heinrich M. Jaeger

Abstract: This study investigates the rheological behavior of shear-thickening suspensions made of different types of nanoparticles upon the addition of large intruders referred to as granules. The size ratio ranges from 20 to 120. We examine the effects of granule size, volume fraction, and surface properties on shear-thickening characteristics. Starting with a fumed silica suspension exhibiting discontinu… ▽ More This study investigates the rheological behavior of shear-thickening suspensions made of different types of nanoparticles upon the addition of large intruders referred to as granules. The size ratio ranges from 20 to 120. We examine the effects of granule size, volume fraction, and surface properties on shear-thickening characteristics. Starting with a fumed silica suspension exhibiting discontinuous shear thickening (DST) without granules, the addition of granules at different volume fractions, shifts the onset of thickening to lower shear rates. Concomitantly, the strength of the thickening, quantified by the thickening index, decreases, transitioning from DST to continuous shear thickening (CST). Comparison with suspensions of nanosilica spheres reveals a similar trend, suggesting generality across different systems. However, these results contrast with cornstarch-based suspensions, where granule addition enhances thickening. This difference is attributed to the large size ratio studied here: When the granules are much larger than the particles in the interstitial suspension, the granules introduce a spread in the local shear rate and disrupt the particles' ability to form an extended fabric of force chains. The findings highlight the critical role of particle size ratio in determining the rheology of complex suspensions, paving the way for tailoring material properties in industrial and scientific applications. △ Less

Submitted 6 January, 2025; originally announced January 2025.

Tunable mechanical properties and air-based lubrication in an acoustically levitated granular material

Authors: Nina M. Brown, Bryan VanSaders, Jason M. Kronenfeld, Joseph M. DeSimone, Heinrich M. Jaeger

Abstract: Cohesive granular materials are found in many natural and industrial environments, but experimental platforms for exploring the innate mechanical properties of these materials are often limited by the difficulty of adjusting cohesion strength. Granular particles levitated in an acoustic cavity form a model system to address this. Such particles self-assemble into free-floating, quasi-two-dimension… ▽ More Cohesive granular materials are found in many natural and industrial environments, but experimental platforms for exploring the innate mechanical properties of these materials are often limited by the difficulty of adjusting cohesion strength. Granular particles levitated in an acoustic cavity form a model system to address this. Such particles self-assemble into free-floating, quasi-two-dimensional raft structures which are held together by acoustic scattering forces; the strength of this attraction can be changed simply by modifying the sound field. We investigate the mechanical properties of acoustically bound granular rafts using substrate-free micro-scale shear tests. We first demonstrate deformation of rafts of spheres and the dependence of this deformation on acoustic pressure. We then apply these methods to rafts composed of anisotropic sand grains and smaller spheres, in which the smaller spheres have a thin layer of air separating them from other grain surfaces. These spheres act as soft, effectively frictionless particles that populate the interstices between the larger grains, which enables us to investigate the effect of lubricating the mixture in the presence of large-grain cohesion. △ Less

Submitted 17 December, 2024; originally announced December 2024.

Comments: This preprint has not undergone peer review or any post-submission improvements or corrections. A version of this article has been accepted for publication in Granular Matter. This will be updated with a link to the Version of Record once the article has been published

Shear thickening inside elastic open-cell foams under dynamic compression

Authors: Samantha M. Livermore, Alice Pelosse, Michael van der Naald, Hojin Kim, Séverine Atis, Heinrich M. Jaeger

Abstract: We measure the response of open-cell polyurethane foams filled with a dense suspension of fumed silica particles in polyethylene glycol at compression speeds spanning several orders of magnitude. The gradual compressive stress increase of the composite material indicates the existence of shear rate gradients in the interstitial suspension caused by wide distributions in pore sizes in the disordere… ▽ More We measure the response of open-cell polyurethane foams filled with a dense suspension of fumed silica particles in polyethylene glycol at compression speeds spanning several orders of magnitude. The gradual compressive stress increase of the composite material indicates the existence of shear rate gradients in the interstitial suspension caused by wide distributions in pore sizes in the disordered foam network. The energy dissipated during compression scales with an effective internal shear rate, allowing for the collapse of three data sets for different pore-size foams. When scaled by this effective shear rate, the most pronounced energy increase coincides with the effective shear rate corresponding to the onset of shear thickening in our bulk suspension. Optical measurements of the radial deformation of the foam network and of the suspension flow under compression provide additional insight into the interaction between shear thickening fluid and foam. This optical data, combined with a simple model of a spring submerged in viscous flow, illustrates the dynamic interaction of viscous drag with foam elasticity as a function of compression rate, and identifies the foam pore size distribution as a critically important model parameter. Taken together, the stress measurements, dissipated energy, and relative motion of the fluid and the foam can be rationalized by knowing the pore size distribution and the average pore size of the foam. △ Less

Submitted 3 October, 2024; originally announced October 2024.

Strain stiffening due to stretching of entangled particles in random packings of granular materials

Authors: Eric Brown, Kevin A. Mitchell, Alice Nasto, Athanasios Athanassiadis, Heinrich M. Jaeger

Abstract: Stress-strain relations for random packings of entangling chains under triaxial compression can exhibit strain stiffening and sustain stresses several orders-of-magnitude beyond typical granular materials. X-ray tomography reveals the transition to this strong strain stiffening occurs when chains are long enough to entangle an average of about one chain each, which results in system-filling cluste… ▽ More Stress-strain relations for random packings of entangling chains under triaxial compression can exhibit strain stiffening and sustain stresses several orders-of-magnitude beyond typical granular materials. X-ray tomography reveals the transition to this strong strain stiffening occurs when chains are long enough to entangle an average of about one chain each, which results in system-filling clusters of entangled chains. The number of entanglements is nearly proportional to the area surrounded by entangling particles with an excluded volume effect. A tendency was found for chain links to stretch when the packing was strained. The slope of the stress-strain relation of the packing can be calculated from a mean-field model consisting of the product of the effective extensional modulus of the chain, packing fraction, probability of stretched links, and the ratio of strain of stretched links to packing strain. The stress-strain model requires as input measurements of the ratio between local particle deformation and global average strain, and the probability of stretching for non-rigid particles. This results in a quadratic prediction for the stress-strain curve, with a curvature that agrees with experiments within the model uncertainties. This model explains that the strength of these packings comes from stretching of the links of chains, but only when the system-filling network of entanglements provides constraints that prevents failure by shear banding, so that particles must be deformed to move further under strain. In this model, the increasing slope of the stress-strain curve is mainly due to the fraction of stretched links increasing with strain. This model for the stress-strain relation is shown to be generalizable to different shapes of entangling particles by applying it to staples. △ Less

Submitted 11 February, 2025; v1 submitted 16 August, 2024; originally announced August 2024.

Comments: 22 pages, 24 figures, published in Physical Review E

Journal ref: Physical Review E 111, 025408 (2025)

Direct measurement of forces in air-based acoustic levitation systems

Authors: Nina M. Brown, Bryan VanSaders, Jason M. Kronenfeld, Joseph M. DeSimone, Heinrich M. Jaeger

Abstract: Acoustic levitation is frequently used for non-contact manipulation of objects and to study the impact of microgravity on physical and biological processes. While the force field produced by sound pressure lifts particles against gravity (primary acoustic force), multiple levitating objects in the same acoustic cavity interact via forces that arise from scattered sound (secondary acoustic forces).… ▽ More Acoustic levitation is frequently used for non-contact manipulation of objects and to study the impact of microgravity on physical and biological processes. While the force field produced by sound pressure lifts particles against gravity (primary acoustic force), multiple levitating objects in the same acoustic cavity interact via forces that arise from scattered sound (secondary acoustic forces). Current experimental techniques for obtaining these force fields are not well-suited for mapping the primary force field at high spatial resolution and cannot directly measure the secondary scattering force. Here we introduce a method that can measure both acoustic forces in situ, including secondary forces in the near-field limit between arbitrarily shaped, closely spaced objects. Operating similarly to an atomic force microscope, the method inserts into the acoustic cavity a suitably shaped probe tip at the end of a long, flexible cantilever and optically detects its deflection. This makes it possible to measure forces with a resolution better than 50 nN, and also to apply stress or strain in a controlled manner to manipulate levitated objects. We demonstrate this by extracting the acoustic potential present in a levitation cavity, directly measuring the acoustic scattering force between two objects, and applying tension to a levitated granular raft of acoustically-bound particles in order to obtain the force-displacement curve for its deformation. △ Less

Submitted 9 August, 2024; v1 submitted 26 June, 2024; originally announced June 2024.

Comments: The following article has been accepted for publication in Review of Scientific Instruments

Shear thickening in suspensions of particles with dynamic brush layers

Authors: Hojin Kim, Michael van der Naald, Finn A. Braaten, Thomas A. Witten, Stuart J. Rowan, Heinrich M. Jaeger

Abstract: Control of frictional interactions among liquid-suspended particles has led to tunable, strikingly non-Newtonian rheology via the formation of strong flow constraints as particles come into close proximity under shear. Typically, these frictional interactions have been in the form of physical contact, controllable via particle shape and surface roughness. We investigate a different route, where mo… ▽ More Control of frictional interactions among liquid-suspended particles has led to tunable, strikingly non-Newtonian rheology via the formation of strong flow constraints as particles come into close proximity under shear. Typically, these frictional interactions have been in the form of physical contact, controllable via particle shape and surface roughness. We investigate a different route, where molecular bridging between nearby particle surfaces generates a controllable "sticky" friction. This is achieved with surface-functionalized colloidal particles capable of forming dynamic covalent bonds with telechelic polymers that comprise the suspending fluid. At low shear stress this results in particles coated with a uniform polymer brush layer. Beyond an onset stress the telechelic polymers become capable of bridging and generate shear thickening. Over the size range investigated, we find that the dynamic brush layer leads to dependence of the onset stress on particle diameter that closely follows a power law with exponent -1.76. In the shear thickening regime, we observe an enhanced dilation in measurements of the first normal stress difference and reduction in the extrapolated volume fraction required for jamming, both consistent with an effective particle friction that increases with decreasing particle diameter. These results are discussed in light of predictions for suspensions of hard spheres and of polymer-grafted particles. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Training physical matter to matter

Authors: Heinrich M. Jaeger, Arvind Murugan, Sidney R. Nagel

Abstract: Biological systems offer a great many examples of how sophisticated, highly adapted behavior can emerge from training. Here we discuss how training might be used to impart similarly adaptive properties in physical matter. As a special form of materials processing, training differs in important ways from standard approaches of obtaining sought after material properties. In particular, rather than d… ▽ More Biological systems offer a great many examples of how sophisticated, highly adapted behavior can emerge from training. Here we discuss how training might be used to impart similarly adaptive properties in physical matter. As a special form of materials processing, training differs in important ways from standard approaches of obtaining sought after material properties. In particular, rather than designing or programming the local configurations and interactions of constituents, training uses externally applied stimuli to evolve material properties. This makes it possible to obtain different functionalities from the same starting material (pluripotency). Furthermore, training evolves a material in-situ or under conditions similar to those during the intended use; thus, material performance can improve rather than degrade over time. We discuss requirements for trainability, outline recently developed training strategies for creating soft materials with multiple, targeted and adaptable functionalities, and provide examples where the concept of training has been applied to materials on length scales from the molecular to the macroscopic. △ Less

Submitted 9 March, 2024; originally announced March 2024.

Comments: 1 figure, 60 references

Acoustic manipulation of multi-body structures and dynamics

Authors: Melody X. Lim, Bryan VanSaders, Heinrich M. Jaeger

Abstract: Sound can exert forces on objects of any material and shape. This has made the contactless manipulation of objects by intense ultrasound a fascinating area of research with wide-ranging applications. While much is understood for acoustic forcing of individual objects, sound-mediated interactions among multiple objects at close range gives rise to a rich set of structures and dynamics that are less… ▽ More Sound can exert forces on objects of any material and shape. This has made the contactless manipulation of objects by intense ultrasound a fascinating area of research with wide-ranging applications. While much is understood for acoustic forcing of individual objects, sound-mediated interactions among multiple objects at close range gives rise to a rich set of structures and dynamics that are less explored and have been emerging as a frontier for research. We introduce the basic mechanisms giving rise to sound-mediated interactions among rigid as well as deformable particles, focusing on the regime where the particles' size and spacing are much smaller than the sound wavelength. The interplay of secondary acoustic scattering, Bjerknes forces, and micro-streaming is discussed and the role of particle shape is highlighted. Furthermore, we present recent advances in characterizing non-conservative and non-pairwise additive contributions to the particle interactions, along with instabilities and active fluctuations. These excitations emerge at sufficiently strong sound energy density and can act as an effective temperature in otherwise athermal systems. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Rheology of bidisperse non-Brownian suspensions

Authors: Abhinendra Singh, Christopher Ness, Abhishek K. Sharma, Juan J. de Pablo, Heinrich M. Jaeger

Abstract: We study the rheology of bidisperse non-Brownian suspensions using particle-based simulation, mapping the viscosity as a function of the size ratio of the species, their relative abundance, and the overall solid content. The variation of the viscosity with applied stress exhibits shear thickening phenomenology irrespective of composition, though the stress-dependent limiting solids fraction govern… ▽ More We study the rheology of bidisperse non-Brownian suspensions using particle-based simulation, mapping the viscosity as a function of the size ratio of the species, their relative abundance, and the overall solid content. The variation of the viscosity with applied stress exhibits shear thickening phenomenology irrespective of composition, though the stress-dependent limiting solids fraction governing the viscosity and its divergence point are non-monotonic in the mixing ratio. Contact force data demonstrate an asymmetric exchange in dominant stress contribution from large-large to small-small particle contacts as the mixing ratio of the species evolves. Combining a prior model for shear thickening with one for composition-dependent jamming, we obtain a full description of the rheology of bidisperse non-Brownian suspensions capable of predicting effects such as the viscosity reduction observed upon adding small particle fines to a suspension of large particles. △ Less

Submitted 31 May, 2024; v1 submitted 9 November, 2023; originally announced November 2023.

Comments: 5 pages, 4 figures

A self-organizing robotic aggregate using solid and liquid-like collective states

Authors: Baudouin Saintyves, Matthew Spenko, Heinrich M. Jaeger

Abstract: Designing robotic systems that can change their physical form factor as well as their compliance to adapt to environmental constraints remains a major conceptual and technical challenge. To address this, we introduce the Granulobot, a modular system that blurs the distinction between soft, modular, and swarm robotics. The system consists of gear-like units that each contain a single actuator such… ▽ More Designing robotic systems that can change their physical form factor as well as their compliance to adapt to environmental constraints remains a major conceptual and technical challenge. To address this, we introduce the Granulobot, a modular system that blurs the distinction between soft, modular, and swarm robotics. The system consists of gear-like units that each contain a single actuator such that units can self-assemble into larger, granular aggregates using magnetic coupling. These aggregates can reconfigure dynamically and also split up into subsystems that might later recombine. Aggregates can self-organize into collective states with solid- and liquid-like properties, thus displaying widely differing compliances. These states can be perturbed locally via actuators or externally via mechanical feedback from the environment to produce adaptive shape shifting in a decentralized manner. This in turn can generate locomotion strategies adapted to different conditions. Aggregates can move over obstacles without using external sensors or coordinate to maintain a steady gait over different surfaces without electronic communication among units. The modular design highlights a physical, morphological form of control that advances the development of resilient robotic systems with the ability to morph and adapt to different functions and conditions. △ Less

Submitted 28 August, 2023; v1 submitted 6 April, 2023; originally announced April 2023.

Comments: 42 pages, 8 figures

Hydrodynamic Coupling Melts Acoustically Levitated Crystalline Rafts

Authors: Brady Wu, Bryan VanSaders, Melody X. Lim, Heinrich M. Jaeger

Abstract: The acoustic levitation of small particles provides a versatile platform to investigate the collective dynamical properties of self-assembled many-body systems in the presence of hydrodynamic coupling. However, acoustic scattering forces can only generate attractive interactions at close range in the levitation plane, limiting self-assembly to rafts where particles come into direct, dissipative, c… ▽ More The acoustic levitation of small particles provides a versatile platform to investigate the collective dynamical properties of self-assembled many-body systems in the presence of hydrodynamic coupling. However, acoustic scattering forces can only generate attractive interactions at close range in the levitation plane, limiting self-assembly to rafts where particles come into direct, dissipative, contact. Here, we overcome this limitation by using particles small enough that the viscosity of air establishes a repulsive streaming flow at close range. By tuning the size of particles relative to the characteristic length scale of the viscous flow, we control the interplay between attractive and repulsive forces. In this novel granular raft, particles form an open lattice with tunable spacing. Hydrodynamic coupling between particles gives rise to spontaneous excitations in the lattice, in turn driving intermittent particle rearrangements. Under the action of these fluctuations, the raft transitions from a predominantly quiescent, crystalline structure, to a two-dimensional liquid-like state. We show that this transition is characterized by dynamic heterogeneity and intermittency, as well as cooperative particle movements, that produce an effectively `cageless' crystal. These findings shed light on fluid-coupling driven excitations that are difficult to isolate and control in many other hydrodynamic systems. △ Less

Submitted 4 November, 2022; originally announced November 2022.

Acoustically levitated lock and key grains

Authors: Melody X. Lim, Heinrich M. Jaeger

Abstract: We present a scheme for generating shape-dependent, specific bonds between millimeter scale particles, using acoustic levitation. We levitate particles in an ultrasonic standing wave, allowing for substrate-free assembly. Secondary scattering generates shape-dependent attractive forces between particles, while driving the acoustic trap above its resonance frequency produces active fluctuations tha… ▽ More We present a scheme for generating shape-dependent, specific bonds between millimeter scale particles, using acoustic levitation. We levitate particles in an ultrasonic standing wave, allowing for substrate-free assembly. Secondary scattering generates shape-dependent attractive forces between particles, while driving the acoustic trap above its resonance frequency produces active fluctuations that mimic an effective temperature. We 3D print planar particles, and show that the local curvature of their binding sites controls the selectivity for attaching a matching particle. We find that the bound-state probability and bound-state lifetime can be independently tuned via the binding site depth and height respectively. Finally, we show that these principles can be used to design particles that assemble into complex structures. △ Less

Submitted 11 August, 2022; originally announced August 2022.

Designing Stress-Adaptive Dense Suspensions using Dynamic Covalent Chemistry

Authors: Grayson L. Jackson, Joseph M. Dennis, Neil D. Dolinski, Michael van der Naald, Hojin Kim, Christopher Eom, Stuart J. Rowan, Heinrich M. Jaeger

Abstract: The non-Newtonian behaviors of dense suspensions are central to their use in technological and industrial applications and arise from a network of particle-particle contacts that dynamically adapts to imposed shear. Reported herein are studies aimed at explor-ing how dynamic covalent chemistry between particles and the polymeric solvent can be used to tailor such stress-adaptive contact networks l… ▽ More The non-Newtonian behaviors of dense suspensions are central to their use in technological and industrial applications and arise from a network of particle-particle contacts that dynamically adapts to imposed shear. Reported herein are studies aimed at explor-ing how dynamic covalent chemistry between particles and the polymeric solvent can be used to tailor such stress-adaptive contact networks leading to their unusual rheological behaviors. Specifically, a room temperature dynamic thia-Michael bond is employed to rationally tune the equilibrium constant (Keq) of the polymeric solvent to the particle interface. It is demonstrated that low Keq leads to shear thinning while high Keq produces antithixotropy, a rare phenomenon where the viscosity increases with shearing time. It is proposed that an increase in Keq increases the polymer graft density at the particle surface and that antithixotropy primar-ily arises from partial debonding of the polymeric graft/solvent from the particle surface and the formation of polymer bridges between particles. Thus, the implementation of dynamic covalent chemistry provides a new molecular handle with which to tailor the macroscopic rheology of suspensions by introducing programable time dependence. These studies open the door to energy absorbing materials that not only sense mechanical inputs and adjust their dissipation as a function of time or shear rate but can switch between these two modalities on demand. △ Less

Submitted 23 March, 2022; originally announced March 2022.

Comments: 9 pages, 5 figures (Supporting: 26 pages, 17 figures)

Journal ref: Macromolecules 2022

Stress-activated Constraints in Dense Suspension Rheology

Authors: Abhinendra Singh, Grayson L. Jackson, Michael van der Naald, Juan J. de Pablo, Heinrich M. Jaeger

Abstract: Dispersing small particles in a liquid can produce surprising behaviors when the solids fraction becomes large: rapid shearing drives these systems out of equilibrium and can lead to dramatic increases in viscosity (shear-thickening) or even solidification (shear jamming). These phenomena occur above a characteristic onset stress when particles are forced into frictional contact. Here we show via… ▽ More Dispersing small particles in a liquid can produce surprising behaviors when the solids fraction becomes large: rapid shearing drives these systems out of equilibrium and can lead to dramatic increases in viscosity (shear-thickening) or even solidification (shear jamming). These phenomena occur above a characteristic onset stress when particles are forced into frictional contact. Here we show via simulations how this can be understood within a framework that abstracts details of the forces acting at particle-particle contacts into general stress-activated constraints on relative particle movement. We find that focusing on just two constraints, affecting sliding and rolling at contact, can reproduce the experimentally observed shear thickening behavior quantitatively, despite widely different particle properties, surface chemistries, and suspending fluids. Within this framework parameters such as coefficients of sliding and rolling friction can each be viewed as a proxy for one or more forces of different physical or chemical origin, while the parameter magnitudes indicate the relative importance of the associated constraint. In this way, a new link is established that connects features observable in macroscale rheological measurements to classes of constraints arising from micro- or nano-scale properties. △ Less

Submitted 22 August, 2021; originally announced August 2021.

Comments: 7 Pages, 4 Figures

Mechanical properties of acoustically levitated granular rafts

Authors: Melody X. Lim, Bryan VanSaders, Anton Souslov, Heinrich M. Jaeger

Abstract: We investigate a model system for the rotational dynamics of inertial many-particle clustering, in which sub-millimeter objects are acoustically levitated in air. Driven by scattered sound, levitated grains self-assemble into a monolayer of particles, forming mesoscopic granular rafts with both an acoustic binding energy and a bending rigidity. Detuning the acoustic trap can give rise to stochasti… ▽ More We investigate a model system for the rotational dynamics of inertial many-particle clustering, in which sub-millimeter objects are acoustically levitated in air. Driven by scattered sound, levitated grains self-assemble into a monolayer of particles, forming mesoscopic granular rafts with both an acoustic binding energy and a bending rigidity. Detuning the acoustic trap can give rise to stochastic forces and torques that impart angular momentum to levitated objects. As the angular momentum of a quasi-two-dimensional granular raft is increased, the raft deforms from a disk to an ellipse, eventually pinching off into multiple separate rafts, in a mechanism that resembles the break-up of a liquid drop. We extract the raft effective surface tension and elastic modulus, and show that non-pairwise acoustic forces give rise to effective elastic moduli that scale with the raft size. We also show that the raft size controls the microstructural basis of plastic deformation, resulting in a transition from fracture to ductile failure. △ Less

Submitted 10 March, 2022; v1 submitted 17 June, 2021; originally announced June 2021.

Effect of two parallel intruders on net work during granular penetrations

Authors: Swapnil Pravin, Brian Chang, Endao Han, Lionel London, Daniel I. Goldman, Heinrich M. Jaeger, S. Tonia Hsieh

Abstract: The impact of single passive intruders into granular particles has been studied in detail. However, the impact force produced by multiple intruders separated at a distance from one another, and hence the effect of their presence in close proximity to one another, is largely unexplored. Here, we use numerical simulations and laboratory experiments to study the force response of two parallel rods in… ▽ More The impact of single passive intruders into granular particles has been studied in detail. However, the impact force produced by multiple intruders separated at a distance from one another, and hence the effect of their presence in close proximity to one another, is largely unexplored. Here, we use numerical simulations and laboratory experiments to study the force response of two parallel rods intruding vertically into granular media while varying the gap spacing between them. We also explored the effect of variations in friction, intruder size, and particle size on the force response. The net work ($W$) of the two rods over the depth of intrusion was measured, and the instantaneous velocities of particles over the duration of intrusion were calculated by simulations. We found that the work done by the intruders changes with distance between them. We observed a peak in $W$ at a gap spacing of $\sim$3 particle diameters, which was up to 25% greater than $W$ at large separation (\textgreater 11 particle diameters), beyond which the net work plateaued. This peak was likely due to less particle flow between intruders as we found a larger number of strong forces---identified as force chains---in the particle domain at gaps surrounding the peak force. Although higher friction caused greater force generation during intrusion, the gap spacing between the intruders at which the peak work was generated remained unchanged. Larger intruder sizes resulted in greater net work with the peak in $W$ occurring at slightly larger intruder separations. Taken together, our results show that peak work done by two parallel intruders remained within a narrow range, remaining robust to most other tested parameters. △ Less

Submitted 28 October, 2020; originally announced October 2020.

Comments: 12 pages, 8 figures, 6 supplemental figures, and appendix

Journal ref: Phys. Rev. E 104, 024902 (2021)

Shear thickening and jamming of dense suspensions: the "roll" of friction

Authors: Abhinendra Singh, Christopher Ness, Ryohei Seto, Juan J de Pablo, Heinrich M Jaeger

Abstract: Particle-based simulations of discontinuous shear thickening (DST) and shear jamming (SJ) suspensions are used to study the role of stress-activated constraints, with an emphasis on resistance to gear-like rolling. Rolling friction decreases the volume fraction required for DST and SJ, in quantitative agreement with real-life suspensions with adhesive surface chemistries and "rough" particle shape… ▽ More Particle-based simulations of discontinuous shear thickening (DST) and shear jamming (SJ) suspensions are used to study the role of stress-activated constraints, with an emphasis on resistance to gear-like rolling. Rolling friction decreases the volume fraction required for DST and SJ, in quantitative agreement with real-life suspensions with adhesive surface chemistries and "rough" particle shapes. It sets a distinct structure of the frictional force network compared to only sliding friction, and from a dynamical perspective leads to an increase in the velocity correlation length, in part responsible for the increased viscosity. The physics of rolling friction is thus a key element in achieving a comprehensive understanding of strongly shear-thickening materials. △ Less

Submitted 7 May, 2020; v1 submitted 25 February, 2020; originally announced February 2020.

Comments: 5 pages, 4 figures. +Supplemental Material--- --- Supplementary Material also consists of the following movies: ---https://youtu.be/wgrfN7jiu1g (Force network in 3D at volume fraction 0.45, at high stress limit, with and without rolling friction) --- https://youtu.be/SMzTB7CsRsY (Force network in 2D at packing fraction 0.7, at high stress limit, with and without rolling friction)

Journal ref: Phys. Rev. Lett. 124, 248005 (2020)

Shape induced segregation and anomalous particle transport under spherical confinement

Authors: Abhinendra Singh, Jiyuan Li, Xikai Jiang, Juan P. Hernández-Ortiz, Heinrich M. Jaeger, Juan J. de Pablo

Abstract: Colloid or nanoparticle mobility under confinement is of central importance to a wide range of physical and biological processes. Here, we introduce a minimal model of particles in a hydrodynamic continuum to examine how particle shape and concentration affect the transport of particles in spherical confinement. Specifically, an immersed boundary-General geometry Ewald-like approach is adopted to… ▽ More Colloid or nanoparticle mobility under confinement is of central importance to a wide range of physical and biological processes. Here, we introduce a minimal model of particles in a hydrodynamic continuum to examine how particle shape and concentration affect the transport of particles in spherical confinement. Specifically, an immersed boundary-General geometry Ewald-like approach is adopted to simulate the dynamics of spheres and cylinders under the influence of short-and long-range fluctuating hydrodynamic interactions with appropriate non-slip conditions at the confining walls. An efficient $\it{O(N)}$ parallel finite element algorithm is used, thereby allowing simulations at high concentrations, while a Chebyshev polynomial approximation is implemented in order to satisfy the fluctuation-dissipation theorem. A concentration-dependent anomalous diffusion is observed for suspended particles. It is found that introducing cylinders in a background of spheres, i.e. particles with a simple degree of anisotropy, has a pronounced influence on the structure and dynamics of the particles. First, increasing the fraction of cylinders induces a particle segregation effect, where spheres are pushed towards the wall and cylinders remain near the center of the cavity. This segregation leads to lower mobility for the spheres relative to that encountered in a system of pure spheres at the same volume fraction. Second, the diffusive-to-anomalous transition and the degree of anomaly--quantified by the power-law exponent in the mean square displacement vs. time relation-both increase as the fraction of cylinders becomes larger. These findings are of relevance for studies of diffusion in the cytoplasm, where proteins exhibit a distribution of size and shapes that could lead to some of the effects identified in the simulations reported here. △ Less

Submitted 5 February, 2020; originally announced February 2020.

Comments: 9 pages, 5 figures

Journal ref: Physics of Fluids 32, 053307 (2020)

Dynamic and programmable cellular-scale granules enable tissue-like materials

Authors: Yin Fang, Endao Han, Xin-Xing Zhang, Yuanwen Jiang, Yiliang Lin, Jiuyun Shi, Jiangbo Wu, Lingyuan Meng, Xiang Gao, Philip J. Griffin, Xianghui Xiao, Hsiu-Ming Tsai, Hua Zhou, Xiaobing Zuo, Qing Zhang, Miaoqi Chu, Qingteng Zhang, Ya Gao, Leah K. Roth, Reiner Bleher, Zhiyuan Ma, Zhang Jiang, Jiping Yue, Chien-Min Kao, Chin-Tu Chen , et al. (4 additional authors not shown)

Abstract: Tissue-like materials are required in many robotic systems to improve human-machine interactions. However, the mechanical properties of living tissues are difficult to replicate. Synthetic materials are not usually capable of simultaneously displaying the behaviors of the cellular ensemble and the extracellular matrix. A particular challenge is identification of a cell-like synthetic component whi… ▽ More Tissue-like materials are required in many robotic systems to improve human-machine interactions. However, the mechanical properties of living tissues are difficult to replicate. Synthetic materials are not usually capable of simultaneously displaying the behaviors of the cellular ensemble and the extracellular matrix. A particular challenge is identification of a cell-like synthetic component which is tightly integrated with its matrix and also responsive to external stimuli at the population level. Here, we demonstrate that cellular-scale hydrated starch granules, an underexplored component in materials science, can turn conventional hydrogels into tissue-like materials when composites are formed. Using several synchrotron-based X-ray techniques, we reveal the mechanically-induced motion and training dynamics of the starch granules in the hydrogel matrix. These dynamic behaviors enable multiple tissue-like properties such as strain-stiffening, anisotropy, mechanical heterogeneity, programmability, mechanochemistry, impact absorption, and self-healability. The starch-hydrogel composites can be processed as robotic skins that maintain these tissue-like characteristics. △ Less

Submitted 9 November, 2019; originally announced November 2019.

Comments: 73 pages, main text and supplemental information

Memory in nonmonotonic stress relaxation of a granular system

Authors: Kieran A. Murphy, Jonathon W. Kruppe, Heinrich M. Jaeger

Abstract: We demonstrate experimentally that a granular packing of glass spheres is capable of storing memory of multiple strain states in the dynamic process of stress relaxation. Modeling the system as a non-interacting population of relaxing elements, we find that the functional form of the predicted relaxation requires a quantitative correction which grows in severity with each additional memory and is… ▽ More We demonstrate experimentally that a granular packing of glass spheres is capable of storing memory of multiple strain states in the dynamic process of stress relaxation. Modeling the system as a non-interacting population of relaxing elements, we find that the functional form of the predicted relaxation requires a quantitative correction which grows in severity with each additional memory and is suggestive of interactions between elements. Our findings have implications for the broad class of soft matter systems that display memory and anomalous relaxation. △ Less

Submitted 16 November, 2019; v1 submitted 4 November, 2019; originally announced November 2019.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. Lett. 124, 168002 (2020)

Stress fluctuations and shear thickening in dense granular suspensions

Authors: Qin Xu, Abhinendra Singh, Heinrich M. Jaeger

Abstract: We experimentally investigate the rheology and stress fluctuations of granules densely suspended in silicone oil. We find that both thickening strength and stress fluctuations significantly weaken with oil viscosity $η_0$. Comparison of our rheological results to the Wyart-Cates model for describing different dynamic jamming states suggests a transition from frictional contacts to lubrication inte… ▽ More We experimentally investigate the rheology and stress fluctuations of granules densely suspended in silicone oil. We find that both thickening strength and stress fluctuations significantly weaken with oil viscosity $η_0$. Comparison of our rheological results to the Wyart-Cates model for describing different dynamic jamming states suggests a transition from frictional contacts to lubrication interactions as $η_0$ increases. To clarify the contribution from viscous interactions to the rheology, we systematically measure stress fluctuations in various flow states. Reduction of stress fluctuations with $η_0$ indicates that a strong lubrication layer greatly inhibits force correlations among particles. Measuring stress fluctuations in the strong shear thickening regime, we observe a crossover from asymmetric Gamma to symmetric Gaussian distributions and associated with it a decrease of lateral (radial) correlation length $ξ$ with increasing shear rate. △ Less

Submitted 22 October, 2019; originally announced October 2019.

Comments: 18 pages, 5 figures

Intrusion into granular media beyond the quasi-static regime

Authors: Leah K. Roth, Endao Han, Heinrich M. Jaeger

Abstract: The drag force exerted on an object intruding into granular media can depend on the object's velocity as well as the depth penetrated. We report on intrusion experiments at constant speed over four orders in magnitude together with systematic molecular dynamics simulations well beyond the quasi-static regime. We find that velocity dependence crosses over to depth dependence at a characteristic tim… ▽ More The drag force exerted on an object intruding into granular media can depend on the object's velocity as well as the depth penetrated. We report on intrusion experiments at constant speed over four orders in magnitude together with systematic molecular dynamics simulations well beyond the quasi-static regime. We find that velocity dependence crosses over to depth dependence at a characteristic time after initial impact. This crossover time scale, which depends on penetration speed, depth, gravity and intruder geometry, challenges current models that assume additive contributions to the drag. △ Less

Submitted 23 October, 2019; originally announced October 2019.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. Lett. 126, 218001 (2021)

Precision measurement of tribocharging in acoustically levitated sub-millimeter grains

Authors: Adam G. Kline, Melody Xuan Lim, Heinrich M. Jaeger

Abstract: Contact electrification of dielectric grains forms the basis for a myriad of physical phenomena. However, even the basic aspects of collisional charging between grains are still unclear. Here we develop a new experimental method, based on acoustic levitation, which allows us to controllably and repeatedly collide two sub-millimeter grains and measure the evolution of their electric charges. This i… ▽ More Contact electrification of dielectric grains forms the basis for a myriad of physical phenomena. However, even the basic aspects of collisional charging between grains are still unclear. Here we develop a new experimental method, based on acoustic levitation, which allows us to controllably and repeatedly collide two sub-millimeter grains and measure the evolution of their electric charges. This is therefore the first tribocharging experiment to provide complete electric isolation for the grain-grain system from its surroundings. We use this method to measure collisional charging rates between pairs of grains for three different material combinations: polyethylene-polyethylene, polystyrene-polystyrene, and polystyrene-sulfonated polystyrene. The ability to directly and noninvasively collide particles of different constituent materials, chemical functionality, size, and shape opens the door to detailed studies of collisional charging in granular materials. △ Less

Submitted 21 October, 2019; originally announced October 2019.

Temperature Dependence of Nylon and PTFE Triboelectrification

Authors: Isaac A. Harris, Melody X. Lim, Heinrich M. Jaeger

Abstract: Contact electrification, or tribocharging, is pertinent to a broad range of industrial and natural processes involving dielectric materials. However, the basic mechanism by which charge is transferred between insulators is still unclear. Here, we use a simple apparatus that brings two macroscopic surfaces into repeated contact and measures the charge on the surfaces after each contact. We vary the… ▽ More Contact electrification, or tribocharging, is pertinent to a broad range of industrial and natural processes involving dielectric materials. However, the basic mechanism by which charge is transferred between insulators is still unclear. Here, we use a simple apparatus that brings two macroscopic surfaces into repeated contact and measures the charge on the surfaces after each contact. We vary the temperature of the surfaces, and find that increasing temperature leads to a decrease in the magnitude of charge transfer. When paired with a Monte-Carlo simulation and TGA measurements, our results support a mechanism where adsorbed surface water is crucial for charge exchange. Our setup is easily extendable to a variety of industrially relevant materials. △ Less

Submitted 29 May, 2019; originally announced May 2019.

Comments: 10 pages, 12 figures. Submitted to Physical Review Materials

Journal ref: Phys. Rev. Materials 3, 085603 (2019)

The intertwined roles of particle shape and surface roughness in controlling the shear strength of a granular material

Authors: Kieran A. Murphy, Arthur K. MacKeith, Leah K. Roth, Heinrich M. Jaeger

Abstract: Both the shape of individual particles and their surface properties contribute to the strength of a granular material under shear. Here we show the degree to which these two aspects can be intertwined. In experiments on assemblies of 3D printed, convex lens-shaped particles, we measure the stress-strain response under repeated compressive loading and find that the aggregate's shear strength falls… ▽ More Both the shape of individual particles and their surface properties contribute to the strength of a granular material under shear. Here we show the degree to which these two aspects can be intertwined. In experiments on assemblies of 3D printed, convex lens-shaped particles, we measure the stress-strain response under repeated compressive loading and find that the aggregate's shear strength falls rapidly when compared to other particle shapes. We probe the granular material at mm-scales with X-ray computed tomography and $μ$m-scales with high-resolution surface metrology to look for the cause of the degradation. We find that wear due to accumulated deformation smooths out the lens surfaces in a controlled and systematic manner that correlates with a significant loss of shear strength observed for the assembly as a whole. The sensitivity of lenses to changes in surface properties contrasts with results for assemblies of 3D printed tetrahedra and spheres, which under the same load cycling are found to exhibit only minor degradation in strength. This case study provides insight into the relationship between particle shape, surface wear, and the overall material response, and suggests new strategies when designing a granular material with desired evolution of properties under repeated deformation. △ Less

Submitted 24 June, 2019; v1 submitted 8 February, 2019; originally announced February 2019.

Comments: 6 pages, 5 figures

Edges control clustering in levitated granular matter

Authors: Melody Xuan Lim, Kieran A. Murphy, Heinrich M. Jaeger

Abstract: The properties of small clusters depend dramatically on the interactions between their constituent particles. However, it remains challenging to design and tune the interactions between macroscopic particles, such as in a granular material. Here, we use acoustic levitation to trap macroscopic grains and induce forces between them. Our main results show that particles levitated in an acoustic field… ▽ More The properties of small clusters depend dramatically on the interactions between their constituent particles. However, it remains challenging to design and tune the interactions between macroscopic particles, such as in a granular material. Here, we use acoustic levitation to trap macroscopic grains and induce forces between them. Our main results show that particles levitated in an acoustic field prefer to make contact along sharp edges. The radius of curvature of the edges directly controls the magnitude of these forces. These highly directional interactions, combined with local contact forces, give rise to a diverse array of cluster shapes. Our results open up new possibilities for the design of specific forces between macroscopic particles, directing their assembly, and actuating their motion. △ Less

Submitted 6 June, 2019; v1 submitted 24 January, 2019; originally announced January 2019.

Comments: Submitted to the special edition of Granular Matter, In Memoriam of Robert P. Behringer. For supplementary movies, see https://youtu.be/u_IJsMC69-8 and https://youtu.be/rxNYclVQFUY

Tuning Interparticle Hydrogen Bonding in Shear-Jamming Suspensions: Kinetic Effects and Consequences for Tribology and Rheology

Authors: Nicole M. James, Chiao-Peng Hsu, Nicholas D. Spencer, Heinrich M. Jaeger, Lucio Isa

Abstract: The shear-jamming of dense suspensions can be strongly affected by molecular-scale interactions between particles, e.g. by chemically controlling their propensity for hydrogen bonding. However, hydrogen bonding not only enhances interparticle friction, a critical parameter for shear jamming, but also introduces (reversible) adhesion, whose interplay with friction in shear-jamming systems has so fa… ▽ More The shear-jamming of dense suspensions can be strongly affected by molecular-scale interactions between particles, e.g. by chemically controlling their propensity for hydrogen bonding. However, hydrogen bonding not only enhances interparticle friction, a critical parameter for shear jamming, but also introduces (reversible) adhesion, whose interplay with friction in shear-jamming systems has so far remained unclear. Here, we present atomic force microscopy studies to assess interparticle adhesion, its relationship to friction, and how these attributes are influenced by urea, a molecule that interferes with hydrogen bonding. We characterize the kinetics of this process with nuclear magnetic resonance, relating it to the time dependence of the macroscopic flow behavior with rheological measurements. We find that time-dependent urea sorption reduces friction and adhesion, causing a shift in the shear-jamming onset. These results extend our mechanistic understanding of chemical effects on the nature of shear jamming, promising new avenues for fundamental studies and applications alike. △ Less

Submitted 15 January, 2019; originally announced January 2019.

Controlling Shear Jamming in Dense Suspensions via the Particle Aspect Ratio

Authors: Nicole M. James, Huayue Xue, Medha Goyal, Heinrich M. Jaeger

Abstract: Dense suspension of particles in a liquid exhibit rich, non-Newtonian behaviors such as shear thickening and shear jamming. Shear thickening is known to be enhanced by increasing the particles' frictional interactions and also by making their shape more anisotropic. For shear jamming, however, only the role of interparticle friction has been investigated, while the effect of changing particle shap… ▽ More Dense suspension of particles in a liquid exhibit rich, non-Newtonian behaviors such as shear thickening and shear jamming. Shear thickening is known to be enhanced by increasing the particles' frictional interactions and also by making their shape more anisotropic. For shear jamming, however, only the role of interparticle friction has been investigated, while the effect of changing particle shape has so far not been studied systematically. To address this we here synthesize smooth silica particles and design the particle surface chemistry to generate strong frictional interactions such that dense, aqueous suspensions of spheres exhibit pronounced shear jamming. We then vary particle aspect ratio from $Γ$=1 (spheres) to $Γ$=11 (slender rods), and perform rheological measurements to determine the effect of particle anisotropy on the onset of shear jamming and its precursor, discontinuous shear thickening. Keeping the frictional interactions fixed, we find that increasing aspect ratio significantly reduces $φ_m$, the minimum particle packing fraction at which shear jamming can be observed, to values as low $φ_m=33\%$ for $Γ$=11. The ability to independently control particle interactions due to friction and shape anisotropy yields fundamental insights about the thickening and jamming capabilities of suspensions and provides a framework to rationally design shear jamming characteristics. △ Less

Submitted 13 January, 2019; originally announced January 2019.

Comments: 5 pages, 4 figures

Stress controlled rheology of dense suspensions using transient flows

Authors: Endao Han, Nicole M. James, Heinrich M. Jaeger

Abstract: Dense suspensions of hard particles in a Newtonian liquid can be jammed by shear when the applied stress exceeds a certain threshold. However, this jamming transition from a fluid into a solidified state cannot be probed with conventional steady-state rheology because the stress distribution inside the material cannot be controlled with sufficient precision. Here we introduce and validate a method… ▽ More Dense suspensions of hard particles in a Newtonian liquid can be jammed by shear when the applied stress exceeds a certain threshold. However, this jamming transition from a fluid into a solidified state cannot be probed with conventional steady-state rheology because the stress distribution inside the material cannot be controlled with sufficient precision. Here we introduce and validate a method that overcomes this obstacle. Rapidly propagating shear fronts are generated and used to establish well-controlled local stress conditions that sweep across the material. Exploiting such transient flows, we are able to track how a dense suspension approaches its shear jammed state dynamically, and can quantitatively map out the onset stress for solidification in a state diagram. △ Less

Submitted 28 October, 2018; originally announced October 2018.

Comments: 12 pages, 12 figures

Journal ref: Phys. Rev. Lett. 123, 248002 (2019)

Dynamic jamming of dense suspensions under tilted impact

Authors: Endao Han, Liang Zhao, Nigel Van Ha, S. Tonia Hsieh, Daniel B. Szyld, Heinrich M. Jaeger

Abstract: Dense particulate suspensions can not only increase their viscosity and shear thicken under external forcing, but also jam into a solid-like state that is fully reversible when the force is removed. An impact on the surface of a dense suspension can trigger this jamming process by generating a shear front that propagates into the bulk of the system. Tracking and visualizing such a front is difficu… ▽ More Dense particulate suspensions can not only increase their viscosity and shear thicken under external forcing, but also jam into a solid-like state that is fully reversible when the force is removed. An impact on the surface of a dense suspension can trigger this jamming process by generating a shear front that propagates into the bulk of the system. Tracking and visualizing such a front is difficult because suspensions are optically opaque and the front can propagate as fast as several meters per second. Recently, high-speed ultrasound imaging has been used to overcome this problem and extract two-dimensional sections of the flow field associated with jamming front propagation. Here we extend this method to reconstruct the three-dimensional flow field. This enables us to investigate the evolution of jamming fronts for which axisymmetry cannot be assumed, such as impact at angles tilted away from the normal to the free surface of the suspension. We find that sufficiently far from solid boundaries the resulting flow field is approximately identical to that generated by normal impact, but rotated and aligned with the angle of impact. However, once the front approaches the solid boundary at the bottom of the container, it generates a squeeze flow that deforms the front profile and causes jamming to proceed in a non-axisymmetric manner. △ Less

Submitted 9 May, 2019; v1 submitted 25 October, 2018; originally announced October 2018.

Comments: 12 pages, 11 figures

Transforming mesoscale granular plasticity through particle shape

Authors: Kieran A. Murphy, Karin A. Dahmen, Heinrich M. Jaeger

Abstract: When an amorphous material is strained beyond the point of yielding it enters a state of continual reconfiguration via dissipative, avalanche-like slip events that relieve built-up local stress. However, how the statistics of such events depend on local interactions among the constituent units remains debated. To address this we perform experiments on granular material in which we use particle sha… ▽ More When an amorphous material is strained beyond the point of yielding it enters a state of continual reconfiguration via dissipative, avalanche-like slip events that relieve built-up local stress. However, how the statistics of such events depend on local interactions among the constituent units remains debated. To address this we perform experiments on granular material in which we use particle shape to vary the interactions systematically. Granular material, confined under constant pressure boundary conditions, is uniaxially compressed while stress is measured and internal rearrangements are imaged with x-rays. We introduce volatility, a quantity from economic theory, as a powerful new tool to quantify the magnitude of stress fluctuations, finding systematic, shape-dependent trends. For all 22 investigated shapes the magnitude $s$ of relaxation events is well-fit by a truncated power law distribution $P(s)\sim {s}^{-τ} exp(-s/s^*)$, as has been proposed within the context of plasticity models. The power law exponent $τ$ for all shapes tested clusters around $τ=$ 1.5, within experimental uncertainty covering the range 1.3 - 1.7. The shape independence of $τ$ and its compatibility with mean field models indicate that the granularity of the system, but not particle shape, modifies the stress redistribution after a slip event away from that of continuum elasticity. Meanwhile, the characteristic maximum event size $s^*$ changes by two orders of magnitude and tracks the shape dependence of volatility. Particle shape in granular materials is therefore a powerful new factor influencing the distance at which an amorphous system operates from scale-free criticality. These experimental results are not captured by current models and suggest a need to reexamine the mechanisms driving mesoscale plastic deformation in amorphous systems. △ Less

Submitted 21 December, 2018; v1 submitted 19 August, 2018; originally announced August 2018.

Comments: 11 pages, 8 figures. v3 adds a new appendix and figure about event rates and changes several parts the text

Journal ref: Phys. Rev. X 9, 011014 (2019)

Cluster formation via sonic depletion forces in levitated granular matter

Authors: Melody X. Lim, Anton Souslov, Vincenzo Vitelli, Heinrich M. Jaeger

Abstract: The properties of small clusters can differ dramatically from the bulk phases of the same constituents. In equilibrium, cluster assembly has been recently explored, whereas out of equilibrium, the physical principles of clustering remain elusive. These principles underlie phenomena from molecular assembly to the formation of planets from granular matter. Here, we introduce acoustic levitation as a… ▽ More The properties of small clusters can differ dramatically from the bulk phases of the same constituents. In equilibrium, cluster assembly has been recently explored, whereas out of equilibrium, the physical principles of clustering remain elusive. These principles underlie phenomena from molecular assembly to the formation of planets from granular matter. Here, we introduce acoustic levitation as a platform to experimentally probe the formation of nonequilibrium small structures in a controlled environment. We focus on the minimal models of cluster formation: six and seven millimetre-scale particles in two dimensions. Experiments and modelling reveal that, in contrast to thermal colloids, in non-equilibrium granular ensembles the magnitude of active fluctuations controls not only the assembly rates but also their assembly pathways and ground-state statistics. These results open up new possibilities for non-invasively manipulating macroscopic particles, tuning their interactions, and directing their assembly. △ Less

Submitted 11 August, 2018; originally announced August 2018.

Journal ref: Nature Physics (2019)

Conforming nanoparticle sheets to surfaces with Gaussian curvature

Authors: Noah P. Mitchell, Remington L. Carey, Jelani Hannah, Yifan Wang, Maria Cortes Ruiz, Sean P. McBride, Xiao-Min Lin, Heinrich M. Jaeger

Abstract: Nanoparticle monolayer sheets are ultrathin inorganic-organic hybrid materials that combine highly controllable optical and electrical properties with mechanical flexibility and remarkable strength. Like other thin sheets, their low bending rigidity allows them to easily roll into or conform to cylindrical geometries. Nanoparticle monolayers not only can bend, but also cope with strain through loc… ▽ More Nanoparticle monolayer sheets are ultrathin inorganic-organic hybrid materials that combine highly controllable optical and electrical properties with mechanical flexibility and remarkable strength. Like other thin sheets, their low bending rigidity allows them to easily roll into or conform to cylindrical geometries. Nanoparticle monolayers not only can bend, but also cope with strain through local particle rearrangement and plastic deformation. This means that, unlike thin sheets such as paper or graphene, nanoparticle sheets can much more easily conform to surfaces with complex topography characterized by non-zero Gaussian curvature, like spherical caps or saddles. Here, we investigate the limits of nanoparticle monolayers' ability to conform to substrates with Gaussian curvature by stamping nanoparticle sheets onto lattices of larger polystyrene spheres. Tuning the local Gaussian curvature by increasing the size of the substrate spheres, we find that the stamped sheet morphology evolves through three characteristic stages: from full substrate coverage, where the sheet extends over the interstices in the lattice, to coverage in the form of caps that conform tightly to the top portion of each sphere and fracture at larger polar angles, to caps that exhibit radial folds. Through analysis of the nanoparticle positions, obtained from scanning electron micrographs, we extract the local strain tensor and track the onset of strain-induced dislocations in the particle arrangement. By considering the interplay of energies for elastic and plastic deformations and adhesion, we construct arguments that capture the observed changes in sheet morphology as Gaussian curvature is tuned over two orders of magnitude. △ Less

Submitted 2 February, 2020; v1 submitted 10 August, 2018; originally announced August 2018.

Comments: 13 pages for main text + 5 pages for supplementary information

Journal ref: Soft Matter, 14, 9107-9117 (2018)

Evolutionary strategy for inverse charge measurements of dielectric particles

Authors: Xikai Jiang, Jiyuan Li, Victor Lee, Heinrich M. Jaeger, Olle G. Heinonen, Juan J. de Pablo

Abstract: We report a computational strategy to obtain the charges of individual dielectric particles from experimental observation of their interactions as a function of time. This strategy uses evolutionary optimization to minimize the difference between trajectories extracted from experiment and simulated trajectories based on many-particle force fields. The force fields include both Coulombic interactio… ▽ More We report a computational strategy to obtain the charges of individual dielectric particles from experimental observation of their interactions as a function of time. This strategy uses evolutionary optimization to minimize the difference between trajectories extracted from experiment and simulated trajectories based on many-particle force fields. The force fields include both Coulombic interactions and dielectric polarization effects that arise due to particle-particle charge mismatch and particle-environment dielectric contrast. The strategy was applied to systems of free falling charged granular particles in vacuum, where electrostatic interactions are the only driving forces that influence the particles' motion. We show that when the particles' initial positions and velocities are known, the optimizer requires only an initial and final particle configuration of a short trajectory in order to accurately infer the particles' charges; when the initial velocities are unknown and only the initial positions are given, the optimizer can learn from multiple frames along the trajectory to determine the particles' initial velocities and charges. While the results presented here offer a proof-of-concept demonstration of the proposed ideas, the proposed strategy could be extended to more complex systems of electrostatically charged granular matter. △ Less

Submitted 21 May, 2018; originally announced May 2018.

Collisional Charging of Individual Sub-Millimeter Particles: Using Ultrasonic Levitation to Initiate and Track Charge Transfer

Authors: Victor Lee, Nicole M. James, Scott Waitukaitis, Heinrich M. Jaeger

Abstract: Electrostatic charging of insulating fine particles can be responsible for numerous phenomena ranging from lightning in volcanic plumes to dust explosions. However, even basic aspects of how fine particles become charged are still unclear. Studying particle charging is challenging because it usually involves the complexities associated with many particle collisions. To address these issues we intr… ▽ More Electrostatic charging of insulating fine particles can be responsible for numerous phenomena ranging from lightning in volcanic plumes to dust explosions. However, even basic aspects of how fine particles become charged are still unclear. Studying particle charging is challenging because it usually involves the complexities associated with many particle collisions. To address these issues we introduce a method based on acoustic levitation, which makes it possible to initiate sequences of repeated collisions of a single sub-millimeter particle with a flat plate, and to precisely measure the particle charge in-situ after each collision. We show that collisional charge transfer between insulators is dependent on the hydrophobicity of the contacting surfaces. We use glass, which we modify by attaching nonpolar molecules to the particle, the plate, or both. We find that hydrophilic surfaces develop significant positive charges after contacting hydrophobic surfaces. Moreover, we demonstrate that charging between a hydrophilic and a hydrophobic surface is suppressed in an acidic environment and enhanced in a basic one. Application of an electric field during each collision is found to modify the charge transfer, again depending on surface hydrophobicity. We discuss these results within the context of contact charging due to ion transfer and show that they lend strong support to OH- ions as the charge carriers. △ Less

Submitted 28 January, 2018; originally announced January 2018.

Comments: 24 pages, 6 figures

Journal ref: Phys. Rev. Materials 2, 035602 (2018)

On modeling and measuring viscoelasticity with dynamic Atomic Force Microscopy

Authors: Per-Anders Thorén, Riccardo Borgani, Daniel Forchheimer, Illia Dobryden, Per M. Claesson, Hailu G. Kassa, Philippe Leclère, Yifan Wang, Heinrich M. Jaeger, David B. Haviland

Abstract: The interaction between a rapidly oscillating atomic force microscope tip and a soft material surface is described using both elastic and viscous forces with a moving surface model. We derive the simplest form of this model, motivating it as a way to capture the impact dynamics of the tip and sample with an interaction consisting of two components: interfacial or surface force, and bulk or volumet… ▽ More The interaction between a rapidly oscillating atomic force microscope tip and a soft material surface is described using both elastic and viscous forces with a moving surface model. We derive the simplest form of this model, motivating it as a way to capture the impact dynamics of the tip and sample with an interaction consisting of two components: interfacial or surface force, and bulk or volumetric force. Analytic solutions to the piece-wise linear model identify characteristic time constants, providing a physical explanation of the hysteresis observed in the measured dynamic force quadrature curves. Numerical simulation is used to fit the model to experimental data and excellent agreement is found with a variety of different samples. The model parameters form a dimensionless impact-rheology factor, giving a quantitative physical number to characterize a viscoelastic surface that does not depend on the tip shape or cantilever frequency. △ Less

Submitted 21 May, 2018; v1 submitted 24 November, 2017; originally announced November 2017.

Comments: 13 pages, 7 figures

Journal ref: Phys. Rev. Applied 10, 024017 (2018)

Constitutive relations for shear fronts in shear-thickening suspensions

Authors: Endao Han, Matthieu Wyart, Ivo R. Peters, Heinrich M. Jaeger

Abstract: We study the fronts that appear when a shear-thickening suspension is submitted to a sudden driving force at a boundary. Using a quasi-one-dimensional experimental geometry, we extract the front shape and the propagation speed from the suspension flow field and map out their dependence on applied shear. We find that the relation between stress and velocity is quadratic, as is generally true for in… ▽ More We study the fronts that appear when a shear-thickening suspension is submitted to a sudden driving force at a boundary. Using a quasi-one-dimensional experimental geometry, we extract the front shape and the propagation speed from the suspension flow field and map out their dependence on applied shear. We find that the relation between stress and velocity is quadratic, as is generally true for inertial effects in liquids, but with a pre-factor that can be much larger than the material density. We show that these experimental findings can be explained by an extension of the Wyart-Cates model, which was originally developed to describe steady-state shear-thickening. This is achieved by introducing a sole additional parameter: the characteristic strain scale that controls the crossover from start-up response to steady-state behavior. The theoretical framework we obtain unifies both transient and steady-state properties of shear-thickening materials. △ Less

Submitted 6 November, 2017; originally announced November 2017.

Comments: 17 pages, 13 figures

Journal ref: Phys. Rev. Fluids 3, 073301 (2018)

Auxetic metamaterials from disordered networks

Authors: Daniel R Reid, Nidhi Pashine, Justin M Wozniak, Heinrich M Jaeger, Andrea J Liu, Sidney R Nagel, Juan J de Pablo

Abstract: Recent theoretical work suggests that systematic pruning of disordered networks consisting of nodes connected by springs can lead to materials that exhibit a host of unusual mechanical properties. In particular, global properties such as the Poisson's ratio or local responses related to deformation can be precisely altered. Tunable mechanical responses would be useful in areas ranging from impact… ▽ More Recent theoretical work suggests that systematic pruning of disordered networks consisting of nodes connected by springs can lead to materials that exhibit a host of unusual mechanical properties. In particular, global properties such as the Poisson's ratio or local responses related to deformation can be precisely altered. Tunable mechanical responses would be useful in areas ranging from impact mitigation to robotics and, more generally, for creation of metamaterials with engineered properties. However, experimental attempts to create auxetic materials based on pruning-based theoretical ideas have not been successful. Here we introduce a new and more realistic model of the networks, which incorporates angle-bending forces and the appropriate experimental boundary conditions. A sequential pruning strategy of select bonds in this model is then devised and implemented that enables engineering of specific mechanical behaviors upon deformation, both in the linear and non-linear regimes. In particular, it is shown that the Poisson's ratio can be tuned to arbitrary values. The model and concepts discussed here are validated by preparing physical realizations of the networks designed in this manner, which are produced by laser cutting two-dimensional sheets and are found to behave as predicted. Furthermore, by relying on optimization algorithms, we exploit the networks' susceptibility to tuning to design networks that posses a distribution of stiffer and more compliant bonds, and whose auxetic behavior is even greater than that of homogeneous networks. Taken together, the findings reported here serve to establish that pruned networks represent a promising platform for the creation of novel mechanical metamaterials. △ Less

Submitted 2 October, 2017; originally announced October 2017.

High-speed ultrasound imaging in dense suspensions reveals impact-activated solidification due to dynamic shear jamming

Authors: Endao Han, Ivo R. Peters, Heinrich M. Jaeger

Abstract: A remarkable property of dense suspensions is that they can transform from liquid-like at rest to solid-like under sudden impact. Previous work showed that this impact-induced solidification involves rapidly moving jamming fronts; however, details of this process have remained unresolved. Here we use high-speed ultrasound imaging to probe non-invasively how the interior of a dense suspension respo… ▽ More A remarkable property of dense suspensions is that they can transform from liquid-like at rest to solid-like under sudden impact. Previous work showed that this impact-induced solidification involves rapidly moving jamming fronts; however, details of this process have remained unresolved. Here we use high-speed ultrasound imaging to probe non-invasively how the interior of a dense suspension responds to impact. Measuring the speed of sound we demonstrate that the solidification proceeds without a detectable increase in packing fraction, and imaging the evolving flow field we find that the shear intensity is maximized right at the jamming front. Taken together, this provides direct experimental evidence for jamming by shear, rather than densification, as driving the transformation to solid-like behavior. Based on these findings we propose a new model to explain the anisotropy in the propagation speed of the fronts and delineate the onset conditions for dynamic shear jamming in suspensions. △ Less

Submitted 1 April, 2016; originally announced April 2016.

Comments: 9 pages, 3 figures

From splashing to bouncing: the influence of viscosity on the impact of suspension droplets on a solid surface

Authors: Martin H. Klein Schaarsberg, Ivo R. Peters, Menachem Stern, Kevin Dodge, Wendy W. Zhang, Heinrich M. Jaeger

Abstract: We experimentally investigated the splashing of dense suspension droplets impacting a solid surface, extending prior work to the regime where the viscosity of the suspending liquid becomes a significant parameter. The overall behavior can be described by a combination of two trends. The first one is that the splashing becomes favored when the kinetic energy of individual particles at the surface o… ▽ More We experimentally investigated the splashing of dense suspension droplets impacting a solid surface, extending prior work to the regime where the viscosity of the suspending liquid becomes a significant parameter. The overall behavior can be described by a combination of two trends. The first one is that the splashing becomes favored when the kinetic energy of individual particles at the surface of a droplet overcomes the confinement produced by surface tension. This is expressed by a particle-based Weber number $We_p$. The second is that splashing is suppressed by increasing the viscosity of the solvent. This is expressed by the Stokes number $St$, which influences the effective coefficient of restitution of colliding particles. We developed a phase diagram where the splashing onset is delineated as a function of both $We_p$ and $St$. A surprising result occurs at very small Stokes number, where not only splashing is suppressed but also plastic deformation of the droplet. This leads to a situation where droplets can bounce back after impact, an observation we are able to reproduce using discrete particle numerical simulations that take into account viscous interaction between particles and elastic energy. △ Less

Submitted 17 May, 2016; v1 submitted 10 March, 2016; originally announced March 2016.

Journal ref: Phys. Rev. E 93, 062609 (2016)

Dynamic shear jamming in dense granular suspensions under extension

Authors: Sayantan Majumdar, Ivo R. Peters, Endao Han, Heinrich M. Jaeger

Abstract: Unlike dry granular materials, a dense granular suspension like cornstarch in water can strongly resist extensional flows. At low extension rates, such a suspension behaves like a viscous liquid, but rapid extension results in a response where stresses far exceed the predictions of lubrication hydrodynamics and capillarity. To understand this remarkable mechanical response, we experimentally measu… ▽ More Unlike dry granular materials, a dense granular suspension like cornstarch in water can strongly resist extensional flows. At low extension rates, such a suspension behaves like a viscous liquid, but rapid extension results in a response where stresses far exceed the predictions of lubrication hydrodynamics and capillarity. To understand this remarkable mechanical response, we experimentally measure the normal force imparted by a large bulk of the suspension on a plate moving vertically upward at a controlled velocity. We observe that above a velocity threshold, the peak force increases by orders of magnitude. Using fast ultrasound imaging we map out the local velocity profiles inside the suspension which reveal the formation of a growing jammed region under rapid extension. This region interacts with the rigid boundaries of the container through strong velocity gradients, suggesting a direct connection to the recently proposed shear-jamming mechanism. △ Less

Submitted 9 December, 2016; v1 submitted 7 March, 2016; originally announced March 2016.

Comments: Accepted for publication in Phys. Rev. E

Journal ref: Phys. Rev. E 95, 012603 (2017)

Non-affine bending mode of thin cylindrical tubes

Authors: Efi Efrati, Yifan Wang, Heinrich M. Jaeger, Thomas A. Witten

Abstract: We discuss the response of thin cylindrical tubes to small indentations. The stretching-free embedding of these surfaces is completely determined by the embedding of one edge curve, thus reducing their bending response to an effectively one dimensional problem. We obtain that in general thin cylindrical tubes will bend non-uniformly in response to an indentation normal to their surface. As a conse… ▽ More We discuss the response of thin cylindrical tubes to small indentations. The stretching-free embedding of these surfaces is completely determined by the embedding of one edge curve, thus reducing their bending response to an effectively one dimensional problem. We obtain that in general thin cylindrical tubes will bend non-uniformly in response to an indentation normal to their surface. As a consequence, their local bending stiffness, as measured by indenting at various locations along their axis, is predicted to peak at the center and decrease by a universal factor of 4 at either end of the tube. This characteristic spatial profile of the bending stiffness variation allows a direct determination of the bending modulus of very thin tubes that are shorter than their pinch persistence length, $l_{p}\propto R^{3/2}/t^{1/2}$, where $R$ is the tube diameter and $t$ its wall thickness. We compare our results with experiments performed on rolled-up stainless steel sheets. △ Less

Submitted 6 March, 2016; originally announced March 2016.

Optimizing Packing Fraction in Granular Media Composed of Overlapping Spheres

Authors: Leah K. Roth, Heinrich M. Jaeger

Abstract: What particle shape will generate the highest packing fraction when randomly poured into a container? In order to explore and navigate the enormous search space efficiently, we pair molecular dynamics simulations with artificial evolution. Arbitrary particle shape is represented by a set of overlapping spheres of varying diameter, enabling us to approximate smooth surfaces with a resolution propor… ▽ More What particle shape will generate the highest packing fraction when randomly poured into a container? In order to explore and navigate the enormous search space efficiently, we pair molecular dynamics simulations with artificial evolution. Arbitrary particle shape is represented by a set of overlapping spheres of varying diameter, enabling us to approximate smooth surfaces with a resolution proportional to the number of spheres included. We discover a family of planar triangular particles, whose packing fraction of $φ\sim$ 0.73 outpaces almost all reported experimental results for random packings of frictionless particles. We investigate how $φ$ depends on the arrangement of spheres comprising an individual particle and on the smoothness of the surface. We validate the simulations with experiments using 3D-printed copies of the simplest member of the family, a planar particle consisting of three overlapping spheres with identical radius. Direct experimental comparison with 3D-printed aspherical ellipsoids demonstrates that the triangular particles pack exceedingly well not only in the limit of large system size but also when confined to small containers. △ Less

Submitted 19 October, 2015; originally announced October 2015.

Comments: 7 pages, 7 figures

Freestanding loadbearing structures with Z-shaped particles

Authors: Kieran A. Murphy, Nikolaj Reiser, Darius Choksy, Clare E. Singer, Heinrich M. Jaeger

Abstract: Architectural structures such as masonry walls or columns exhibit a slender verticality, in contrast to the squat, sloped forms obtained with typical unconfined granular materials. Here we demonstrate the ability to create freestanding, weight-bearing, similarly slender and vertical structures by the simple pouring of suitably shaped dry particles into a mold that is subsequently removed. Combinin… ▽ More Architectural structures such as masonry walls or columns exhibit a slender verticality, in contrast to the squat, sloped forms obtained with typical unconfined granular materials. Here we demonstrate the ability to create freestanding, weight-bearing, similarly slender and vertical structures by the simple pouring of suitably shaped dry particles into a mold that is subsequently removed. Combining experiments and simulations we explore a family of particle types that can entangle through their non-convex, hooked shape. We show that Z-shaped particles produce granular aggregates which can either be fluid and pourable, or solid and rigid enough to maintain vertical interfaces and build freestanding columns of large aspect ratio (>10) that support compressive loads without external confinement. We investigate the stability of such columns with uniaxial compression, bending, and vibration tests and compare with other particle types including U-shaped particles and rods. We find a pronounced anisotropy in the internal stress propagation together with strong strain-stiffening, which stabilizes rather than destabilizes the structures under load. △ Less

Submitted 19 October, 2015; originally announced October 2015.

Comments: 9 pages, 11 figures

Turning Statistical Physics Models Into Materials Design Engines

Authors: Marc Z. Miskin, Gurdaman S. Khaira, Juan J. de Pablo, Heinrich M. Jaeger

Abstract: Despite the success statistical physics has enjoyed at predicting the properties of materials for given parameters, the inverse problem, identifying which material parameters produce given, desired properties, is only beginning to be addressed. Recently, several methods have emerged across disciplines that draw upon optimization and simulation to create computer programs that tailor material respo… ▽ More Despite the success statistical physics has enjoyed at predicting the properties of materials for given parameters, the inverse problem, identifying which material parameters produce given, desired properties, is only beginning to be addressed. Recently, several methods have emerged across disciplines that draw upon optimization and simulation to create computer programs that tailor material responses to specified behaviors. However, so far the methods developed either involve black-box techniques, in which the optimizer operates without explicit knowledge of the material's configuration space, or they require carefully tuned algorithms with applicability limited to a narrow subclass of materials. Here we introduce a formalism that can generate optimizers automatically by extending statistical mechanics into the realm of design. The strength of this new approach lies in its capability to transform statistical models that describe materials into optimizers to tailor them. By comparing against standard black-box optimization methods, we demonstrate how optimizers generated by this formalism can be faster and more effective, while remaining straightforward to implement. The scope of our approach includes new possibilities for solving a variety of complex optimization and design problems concerning materials both in and out of equilibrium. △ Less

Submitted 19 October, 2015; originally announced October 2015.

X-ray tomography system to investigate granular materials during mechanical loading

Authors: Athanasios G Athanassiadis, Patrick J. La Rivière, Emil Sidky, Charles Pelizzari, Xiaochuan Pan, Heinrich M. Jaeger

Abstract: We integrate a small and portable medical x-ray device with mechanical testing equipment to enable in-situ, non-invasive measurements of a granular material's response to mechanical loading. We employ an orthopedic C-arm as the x-ray source and detector to image samples mounted in the materials tester. We discuss the design of a custom rotation stage, which allows for sample rotation and tomograph… ▽ More We integrate a small and portable medical x-ray device with mechanical testing equipment to enable in-situ, non-invasive measurements of a granular material's response to mechanical loading. We employ an orthopedic C-arm as the x-ray source and detector to image samples mounted in the materials tester. We discuss the design of a custom rotation stage, which allows for sample rotation and tomographic reconstruction under applied compressive stress. We then discuss the calibration of the system for 3d computed tomography, as well as the subsequent image reconstruction process. Using this system to reconstruct packings of 3d-printed particles, we resolve packing features with 0.52 mm resolution in a (60 mm)$^3$ field of view. By analyzing the performance bounds of the system, we demonstrate that the reconstructions exhibit only moderate noise. △ Less

Submitted 28 July, 2014; v1 submitted 10 June, 2014; originally announced June 2014.

Comments: 10 pages, 8 figures

Shear thickening of highly viscous granular suspensions

Authors: Qin Xu, Sayantan Majumdar, Eric Brown, Heinrich M. Jaeger

Abstract: We experimentally investigate shear thickening in dense granular suspensions under oscillatory shear. Directly imaging the suspension-air interface, we observe dilation beyond a critical strain $γ_c$ and the end of shear thickening as the maximum confining stress is reached and the contact line moves. Analyzing the shear profile, we extract the viscosity contributions due to hydrodynamics $η_μ$, d… ▽ More We experimentally investigate shear thickening in dense granular suspensions under oscillatory shear. Directly imaging the suspension-air interface, we observe dilation beyond a critical strain $γ_c$ and the end of shear thickening as the maximum confining stress is reached and the contact line moves. Analyzing the shear profile, we extract the viscosity contributions due to hydrodynamics $η_μ$, dilation $η_c$ and sedimentation $η_g$. While $η_g$ governs the shear thinning regime, $η_μ$ and $η_c$ together determine the shear thickening behavior. As the suspending liquid's viscosity varies from 10 to 1000 cst, $η_μ$ is found to compete with $η_c$ and soften the discontinuous nature of shear thickening. △ Less

Submitted 28 April, 2014; originally announced April 2014.

Quasi-2D dynamic jamming in cornstarch suspensions: visualization and force measurements

Authors: Ivo R. Peters, Heinrich M. Jaeger

Abstract: We report experiments investigating jamming fronts in a floating layer of cornstarch suspension. The suspension has a packing fraction close to jamming, which dynamically turns into a solid when impacted at a high speed. We show that the front propagates in both axial and transverse direction from the point of impact, with a constant ratio between the two directions of propagation of approximately… ▽ More We report experiments investigating jamming fronts in a floating layer of cornstarch suspension. The suspension has a packing fraction close to jamming, which dynamically turns into a solid when impacted at a high speed. We show that the front propagates in both axial and transverse direction from the point of impact, with a constant ratio between the two directions of propagation of approximately 2. Inside the jammed solid, we observe an additional compression, which results from the increasing stress as the solid grows. During the initial growth of the jammed solid, we measure a force response that can be completely accounted for by added mass. Only once the jamming front reaches a boundary, the added mass cannot account for the measured force anymore. We do not, however, immediately see a strong force response as we would expect when compressing a jammed packing. Instead, we observe a delay in the force response on the pusher, which corresponds to the time it takes for the system to develop a close to uniform velocity gradient that spans the complete system. △ Less

Submitted 3 December, 2014; v1 submitted 24 April, 2014; originally announced April 2014.

Comments: 7 pages, 7 figures

Journal ref: Soft Matter 10 (2014) 6564-6570