-
Surface properties of alkali silicate glasses: Influence of the modifiers
Authors:
Zhen Zhang,
Simona Ispas,
Walter Kob
Abstract:
Using large-scale molecular dynamics simulations, we investigate the surface properties of lithium, sodium, and potassium silicate glasses containing 25 mole % of alkali oxide. The comparison of two types of surfaces, a melt-formed surface (MS) and a fracture surface (FS), demonstrates that the influence of the alkali modifier on the surface properties depends strongly on the nature of the surface…
▽ More
Using large-scale molecular dynamics simulations, we investigate the surface properties of lithium, sodium, and potassium silicate glasses containing 25 mole % of alkali oxide. The comparison of two types of surfaces, a melt-formed surface (MS) and a fracture surface (FS), demonstrates that the influence of the alkali modifier on the surface properties depends strongly on the nature of the surface. The FS exhibits a monotonic increase of modifier concentration with increasing alkali size while the MS shows a saturation of alkali concentration when going from Na to K glasses, indicating the presence of two competing mechanism that influence the properties of a MS. For the FS, we find that larger alkali ions reduce the concentration of under-coordinated Si atoms and increase the fraction of two-membered rings, implying an enhanced chemical reactivity of the surface. For both types of surfaces, the roughness is found to increase with alkali size, with the effect being more pronounced for the FS than for the MS. The height-height correlation functions of the surfaces show a scaling behavior that is independent of the alkali species considered: The ones for the MS are compatible with the prediction of the frozen capillary wave theory while the ones for the FS show a logarithmic growth, i.e., on the nanoscale these surfaces are not self-affine fractals. The influence of the modifier on the surface properties are rationalized in terms of the interplay between multiple factors involving the size of the ions, bond strength, and charge balance on the surface.
△ Less
Submitted 21 April, 2023;
originally announced April 2023.
-
Fracture of silicate glasses: Micro-cavities and correlations between atomic-level properties
Authors:
Zhen Zhang,
Simona Ispas,
Walter Kob
Abstract:
We use large-scale simulations to investigate the dynamic fracture of silica and sodium-silicate glasses under uniaxial tension. The stress-strain curves demonstrate that silica glass is brittle whereas the glasses rich in Na show pronounced ductility. A strong composition dependence is also seen in the crack velocity which is on the order of 1800 m/s for glasses with low Na concentration and decr…
▽ More
We use large-scale simulations to investigate the dynamic fracture of silica and sodium-silicate glasses under uniaxial tension. The stress-strain curves demonstrate that silica glass is brittle whereas the glasses rich in Na show pronounced ductility. A strong composition dependence is also seen in the crack velocity which is on the order of 1800 m/s for glasses with low Na concentration and decreases to 700 m/s if the concentration is high. We find that during the fracture of Na-rich glasses very irregular cavities as large as 3-4 nm form ahead of the crack front, indicating the presence of nanoductility in these glasses. Before fracture occurs, the local composition, structure, and mechanical properties are heterogeneous in space and show a strong dependence on the applied strain. Further analysis of the correlations between these local properties allows to obtain a better microscopic understanding of the deformation and fracture of glasses and how the local heating close to the crack tip, up to several hundred degrees, permits the structure to relax.
△ Less
Submitted 5 May, 2022;
originally announced May 2022.
-
Origin of the non-linear elastic behavior of silicate glasses
Authors:
Zhen Zhang,
Simona Ispas,
Walter Kob
Abstract:
For small tension the response of a solid to an applied stress is given by Hooke's law. Outside this linear regime the relation between stress and strain is no longer universal and at present there is no satisfactory insight on how to connect for disordered materials the stress-strain relation to the microscopic properties of the system. Here we use atomistic computer simulations to establish this…
▽ More
For small tension the response of a solid to an applied stress is given by Hooke's law. Outside this linear regime the relation between stress and strain is no longer universal and at present there is no satisfactory insight on how to connect for disordered materials the stress-strain relation to the microscopic properties of the system. Here we use atomistic computer simulations to establish this connection for the case of silicate glasses containing modifiers. By probing how in the highly non-linear regime the stress-strain curve depends on composition, we are able to identify the microscopic mechanisms that are responsible for the complex dependence of stress on strain, notably the presence of an unexpected quasi-plateau in the tangent modulus. We trace back this dependence to the mobility of the modifiers which, without leaving their cage or modifying the topology of the network, are able to relieve the local stresses. Since the identified mechanism is general, the results obtained in this study will also be helpful for understanding the mechanical response of other disordered materials.
△ Less
Submitted 18 November, 2021;
originally announced November 2021.
-
New interaction potentials for alkaline earth silicate and borate glasses
Authors:
Yueh-Ting Shih,
Siddharth Sundararaman,
Simona Ispas,
Liping Huang
Abstract:
Structure and properties of magnesium silicate and borate melts and glasses were investigated by using newly parameterized interaction potentials in molecular dynamics simulations and compared with those of calcium silicate and borate. The competition between the depolymerization of the silica network and the formation of new bonds with modifier ions leads to the enhancement of the elastic moduli…
▽ More
Structure and properties of magnesium silicate and borate melts and glasses were investigated by using newly parameterized interaction potentials in molecular dynamics simulations and compared with those of calcium silicate and borate. The competition between the depolymerization of the silica network and the formation of new bonds with modifier ions leads to the enhancement of the elastic moduli with increasing modifier content in alkaline earth silicate glasses. Compared with calcium silicate, the higher elastic moduli of magnesium silicate result from a higher connectivity of the overall glass network due to the incorporation of fourfold coordinated magnesium and a more rigid connection between SiO4 tetrahedra and modifier ions. In contrast to the silicates, the effect of modifier content on the elastic moduli of alkaline earth borates is dominated by the fraction of fourfold coordinated boron (N4). Calcium borate with higher N4 shows a more rigid network structure and higher elastic moduli.
△ Less
Submitted 17 February, 2021;
originally announced February 2021.
-
First principles study of the surface of silica and sodium silicate glasses
Authors:
Zhen Zhang,
Walter Kob,
Simona Ispas
Abstract:
We use \textit{ab initio} molecular dynamics simulations to investigate the properties of the dry surface of pure silica and sodium silicate glasses. The surface layers are defined based on the atomic distributions along the direction ($z-$direction) perpendicular to the surfaces. We show that these surfaces have a higher concentration of dangling bonds as well as two-membered (2M) rings than the…
▽ More
We use \textit{ab initio} molecular dynamics simulations to investigate the properties of the dry surface of pure silica and sodium silicate glasses. The surface layers are defined based on the atomic distributions along the direction ($z-$direction) perpendicular to the surfaces. We show that these surfaces have a higher concentration of dangling bonds as well as two-membered (2M) rings than the bulk samples. Increasing concentration of Na$_2$O reduces the proportion of structural defects.
From the vibrational density of states, one concludes that 2M rings have a unique vibrational signature at a frequency $\approx850$~cm$^{-1}$, compatible with experimental findings.
We also find that, due to the presence of surfaces, the atomic vibration in the $z-$direction is softer than for the two other directions. The electronic density of states shows clear the differences between the surface and interior and we can attribute these to specific structural units. Finally, the analysis of the electron localization function allows to get insight on the influence of local structure and the presence of Na on the nature of chemical bonding in the glasses.
△ Less
Submitted 22 January, 2021;
originally announced January 2021.
-
Roughness and scaling properties of oxide glass surfaces at the nanoscale
Authors:
Zhen Zhang,
Simona Ispas,
Walter Kob
Abstract:
Using atomistic computer simulations we determine the roughness and topographical features of melt-formed (MS) and fracture surfaces (FS) of oxide glasses. We find that the topography of the MS is described well by the frozen capillary wave theory. The FS are significant rougher than the MS and depend strongly on glass composition. The height-height correlation function for the FS shows an unexpec…
▽ More
Using atomistic computer simulations we determine the roughness and topographical features of melt-formed (MS) and fracture surfaces (FS) of oxide glasses. We find that the topography of the MS is described well by the frozen capillary wave theory. The FS are significant rougher than the MS and depend strongly on glass composition. The height-height correlation function for the FS shows an unexpected logarithmic dependence on distance, in contrast to the power-law found in experiments. We thus conclude that on length scales less than 10 nm FS are not self-affine fractals.
△ Less
Submitted 15 July, 2020;
originally announced July 2020.
-
Structure and vibrational properties of sodium silicate glass surfaces
Authors:
Zhen Zhang,
Simona Ispas,
Walter Kob
Abstract:
Using molecular dynamics simulations we investigate the dependence of the structural and vibrational properties of the surfaces of sodo-silicate glasses on the sodium content as well as the nature of the surface. Two types of glass surfaces are considered: A melt-formed surface (MS) in which a liquid with a free surface has been cooled down into the glass phase and a fracture surface (FS) obtained…
▽ More
Using molecular dynamics simulations we investigate the dependence of the structural and vibrational properties of the surfaces of sodo-silicate glasses on the sodium content as well as the nature of the surface. Two types of glass surfaces are considered: A melt-formed surface (MS) in which a liquid with a free surface has been cooled down into the glass phase and a fracture surface (FS) obtained by tensile loading of a glass sample. We find that the MS is more abundant in Na and non-bridging oxygen atoms than the FS and the bulk glass, whereas the FS has higher concentration of structural defects such as two-membered rings and under-coordinated Si than the MS. We associate these structural differences to the production histories of the glasses and the mobility of the Na ions. It is also found that for Na-poor systems the fluctuations in composition and local atomic charge density decay with a power-law as a function of distance from the surface while Na-rich systems show an exponential decay with a typical decay length of $\approx2.3$~Å. The vibrational density of states shows that the presence of the surfaces leads to a decrease of the characteristic frequencies in the system. The two-membered rings give rise to a pronounce band at $\approx880$~cm$^{-1}$ which is in good agreement experimental observations.
△ Less
Submitted 26 June, 2020;
originally announced June 2020.
-
New interaction potentials for borate glasses with mixed network formers
Authors:
Siddharth Sundararaman,
Liping Huang,
Simona Ispas,
Walter Kob
Abstract:
We adapt and apply a recently developed optimization scheme used to obtain effective potentials for aluminosilicate glasses to include the network former boron into the interaction parameter set. As input data for the optimization, we used the radial distribution functions of the liquid at high temperature generated by ab initio molecular dynamics simulations, and density, coordination and elastic…
▽ More
We adapt and apply a recently developed optimization scheme used to obtain effective potentials for aluminosilicate glasses to include the network former boron into the interaction parameter set. As input data for the optimization, we used the radial distribution functions of the liquid at high temperature generated by ab initio molecular dynamics simulations, and density, coordination and elastic modulus of glass at room temperature from experiments. The new interaction potentials are shown to reproduce reliably the structure, coordination and mechanical properties over a wide range of compositions for binary alkali borates. Furthermore, the transferability of these new interaction parameters allows mixing to reliably reproduce properties of various boroaluminate and borosilicate glasses.
△ Less
Submitted 18 December, 2019;
originally announced December 2019.
-
The critical role of the interaction potential and simulation protocol for the structural and mechanical properties of sodosilicate glasses
Authors:
Zhen Zhang,
Simona Ispas,
Walter Kob
Abstract:
We compare the ability of various interaction potentials to predict the structural and mechanical properties of silica and sodium silicate glasses. While most structural quantities show a relatively mild dependence on the potential used, the mechanical properties such as the failure stress and strain as well as the elastic moduli depend very strongly on the potential, once finite size effects have…
▽ More
We compare the ability of various interaction potentials to predict the structural and mechanical properties of silica and sodium silicate glasses. While most structural quantities show a relatively mild dependence on the potential used, the mechanical properties such as the failure stress and strain as well as the elastic moduli depend very strongly on the potential, once finite size effects have been taken into account. We find that to avoid such finite size effects, samples of at least 75,000 atoms are needed. Finally we probe how the simulation ensemble influences the fracture properties of the glasses and conclude that fracture simulations should be carried out in the constant pressure ensemble.
△ Less
Submitted 20 January, 2021; v1 submitted 14 October, 2019;
originally announced October 2019.
-
Vibrational properties of sodosilicate glasses from first-principles calculations
Authors:
Dimitrios Kilymis,
Simona Ispas,
Bernard Hehlen,
Sylvain Peuget,
Jean-Marc Delaye
Abstract:
The vibrational properties of three sodosilicate glasses have been investigated in the framework of Density Functional Theory. The pure vibrational density of states has been calculated for all systems and the different vibrational modes have been assigned to specific atoms or structural units. It is shown that the Na content affects several vibrational features as the position and intensity of th…
▽ More
The vibrational properties of three sodosilicate glasses have been investigated in the framework of Density Functional Theory. The pure vibrational density of states has been calculated for all systems and the different vibrational modes have been assigned to specific atoms or structural units. It is shown that the Na content affects several vibrational features as the position and intensity of the $R$ band or the mixing of the rocking and bending atomic motions of the Si-O-Si bridges. The calculated Raman spectra have been found to agree with experimental observations and their decomposition indicated the dominant character of the non-bridging oxygen contribution on the spectra, in particular for the high-frequency band, above 800~cm$^{-1}$.
The decomposition of the high-frequency Raman feature into vibrations of the depolymerized tetrahedra (i.e. $Q_n$-units) has revealed spectral shapes of the partial contributions that cannot be accounted for by simple gaussians as frequently assumed in the treatment of experimentally obtained Raman spectra.
△ Less
Submitted 20 February, 2019; v1 submitted 30 November, 2018;
originally announced November 2018.
-
New interaction potentials for alkali and alkaline-earth aluminosilicate glasses
Authors:
Siddharth Sundararaman,
Liping Huang,
Simona Ispas,
Walter Kob
Abstract:
We apply a recently developed optimization scheme to obtain effective potentials for alkali and alkaline-earth aluminosilicate glasses that contains lithium, sodium, potassium, or calcium as modifiers. As input data for the optimization, we used the radial distribution functions of the liquid at high temperature generated by means of ab initio molecular dynamics simulations and density and elastic…
▽ More
We apply a recently developed optimization scheme to obtain effective potentials for alkali and alkaline-earth aluminosilicate glasses that contains lithium, sodium, potassium, or calcium as modifiers. As input data for the optimization, we used the radial distribution functions of the liquid at high temperature generated by means of ab initio molecular dynamics simulations and density and elastic modulus of glass at room temperature from experiments. The new interaction potentials are able to reproduce reliably the structure and various mechanical and vibrational properties over a wide range of compositions for binary silicates. We have tested these potentials for various ternary systems and find that they are transferable and can be mixed, thus allowing to reproduce and predict the structure and properties of multi-component glasses.
△ Less
Submitted 3 November, 2018;
originally announced November 2018.
-
New optimization scheme to obtain interaction potentials for oxide glasses
Authors:
Siddharth Sundararaman,
Liping Huang,
Simona Ispas,
Walter Kob
Abstract:
We propose a new scheme to parameterize effective potentials that can be used to simulate atomic systems such as oxide glasses. As input data for the optimization, we use the radial distribution functions of the liquid and the vibrational density of state of the glass, both obtained from ab-initio simulations, as well as experimental data on the pressure dependence of the density of the glass. For…
▽ More
We propose a new scheme to parameterize effective potentials that can be used to simulate atomic systems such as oxide glasses. As input data for the optimization, we use the radial distribution functions of the liquid and the vibrational density of state of the glass, both obtained from ab-initio simulations, as well as experimental data on the pressure dependence of the density of the glass. For the case of silica, we find that this new scheme facilitates finding pair potentials that are significantly more accurate than previous ones even if the functional form is the same, thus demonstrating that even simple two-body potentials can be superior to more complex three-body potentials. We have tested the new potential by calculating the pressure dependence of the elastic moduli and find a good agreement with the corresponding experimental data.
△ Less
Submitted 8 April, 2018;
originally announced April 2018.
-
First-principles simulations of glass-formers
Authors:
Walter Kob,
Simona Ispas
Abstract:
In this article we review results of computer simulation of glasses carried out using first principles approaches, notably density functional theory. We start with a brief introduction to this method and compare the pros and cons of this approach with the ones of simulations with classical potentials. This is followed by a discussion of simulation results of various glass-forming systems that have…
▽ More
In this article we review results of computer simulation of glasses carried out using first principles approaches, notably density functional theory. We start with a brief introduction to this method and compare the pros and cons of this approach with the ones of simulations with classical potentials. This is followed by a discussion of simulation results of various glass-forming systems that have been obtained via ab initio simulations and that demonstrate the usefulness of this approach to understand the properties of glasses on the microscopic level.
△ Less
Submitted 27 April, 2016;
originally announced April 2016.
-
Effective interaction potential for amorphous silica from ab initio simulations
Authors:
Antoine Carre,
Simona Ispas,
Jurgen Horbach,
Walter Kob
Abstract:
We discuss a novel approach that allows to obtain effective potentials from ab initio trajectories. Our method consists in fitting the weighted radial distribution functions obtained from the ab initio data with the ones obtained from simulations with the effective potential, and using the parameters of the latter as fitting variables. As a case study, we consider the example of amorphous silica,…
▽ More
We discuss a novel approach that allows to obtain effective potentials from ab initio trajectories. Our method consists in fitting the weighted radial distribution functions obtained from the ab initio data with the ones obtained from simulations with the effective potential, and using the parameters of the latter as fitting variables. As a case study, we consider the example of amorphous silica, a material that is highly relevant in the field of glass science as well as in geology. Our approach is able to obtain an effective potential that gives a better description with respect to structural and thermodynamic properties than the potential proposed by van Beest, Kramer, and van Santen, and that has been very frequently used as a model for amorphous silica. In parallel, we have also used the so-called "force matching" approach proposed by Ercolessi and Adams to obtain an effective potential. We demonstrate that for the case of silica this method does not yield a reliable potential and discuss the likely origin for this failure.
△ Less
Submitted 11 December, 2015;
originally announced December 2015.
-
First principles study of a sodium borosilicate glass-former II: The glass state
Authors:
Laurent Pedesseau,
Simona Ispas,
Walter Kob
Abstract:
We use ab initio simulations to investigate the properties of a sodium borosilicate glass of composition 3Na_2O-B_2O_3-6SiO_2. We find that the broadening of the first peak in the radial distribution functions g_BO(r) and g_BNa(r) is due to the presence of trigonal and tetrahedral boron units as well as to non-bridging oxygen atoms connected to BO_3 units. In agreement with experimental results we…
▽ More
We use ab initio simulations to investigate the properties of a sodium borosilicate glass of composition 3Na_2O-B_2O_3-6SiO_2. We find that the broadening of the first peak in the radial distribution functions g_BO(r) and g_BNa(r) is due to the presence of trigonal and tetrahedral boron units as well as to non-bridging oxygen atoms connected to BO_3 units. In agreement with experimental results we find that the [3]B units involve a significant number of non-bridging oxygens whereas the vast majority of [4]B have only bridging oxygens. We determine the three dimensional distribution of the Na atoms around the [3]B and [4]B units and use this information to explain why the sodium atoms associated to the latter share more oxygen atoms with the central boron atoms than the former units. From the distribution of the electrons we calculate the total electronic density of states as well its decomposition into angular momentum contributions. The vibrational density of states shows at high frequencies a band that originates from the motion of the boron atoms. Furthermore we show that the [3]B and [4]B units give rise to well defined features in the spectrum which thus can be used to estimate the concentration of these structural entities. The contribution of [3]B can be decomposed further into symmetric and asymmetric parts that can also be easily identified in the spectrum. We show that certain features in the spectrum can be used to obtain information on the type of atom that is the second nearest neighbor of a boron in the [4]B unit. We calculate the average Born charges on the bridging and non-bridging oxygen atoms and show that these depend linearly on the angle between the two bonds and the distance from the connected cation, respectively. Finally we have calculated the frequency dependence of the dielectric function as well as the absorption spectra.
△ Less
Submitted 21 August, 2014;
originally announced August 2014.
-
First principles study of a sodium borosilicate glass-former I: The liquid state
Authors:
Laurent Pedesseau,
Simona Ispas,
Walter Kob
Abstract:
We use ab initio simulations to study the static and dynamic properties of a sodium borosilicate liquid with composition 3Na_2O-B_2O_3-6SiO_2, i.e. a system that is the basis of many glass-forming materials. In particular we focus on the question how boron is embedded into the local structure of the silicate network liquid. From the partial structure factors we conclude that there is a weak nanosc…
▽ More
We use ab initio simulations to study the static and dynamic properties of a sodium borosilicate liquid with composition 3Na_2O-B_2O_3-6SiO_2, i.e. a system that is the basis of many glass-forming materials. In particular we focus on the question how boron is embedded into the local structure of the silicate network liquid. From the partial structure factors we conclude that there is a weak nanoscale phase separation between silicon and boron and that the sodium atoms form channel-like structures as they have been found in previous studies of sodo-silicate glass-formers. Our results for the X-ray and neutron structure factor show that this feature is basically unnoticeable in the former but should be visible in the latter as a small peak at small wave-vectors. At high temperatures we find a high concentration of three-fold coordinated boron atoms which decreases rapidly with decreasing T, whereas the number of four-fold coordinated boron atoms increases. Therefore we conclude that at the experimental glass transition temperature most boron atoms will be four-fold coordinated. We show that the transformation of [3]B into [4]B with decreasing T is not just related to the diminution of non-bridging oxygen atoms as claimed in previous studies, but to a restructuration of the silicate matrix. The diffusion constants of the various elements show an Arrhenius behavior and we find that the one for boron has the same value as the one of oxygen and is significantly larger than the one of silicon. This shows that these two network formers have rather different dynamical properties, a result that is also confirmed from the time dependence of the van Hove functions. Finally we show that the coherent intermediate scattering function for the sodium atoms is very different from the incoherent one and that it tracks the one of the matrix atoms.
△ Less
Submitted 21 August, 2014;
originally announced August 2014.
-
Comparative classical and ab initio Molecular Dynamics study of molten and glassy germanium dioxide
Authors:
Michael Hawlitzky,
Juergen Horbach,
Simona Ispas,
Matthias Krack,
Kurt Binder
Abstract:
A Molecular Dynamics (MD) study of static and dynamic properties of molten and glassy germanium dioxide is presented. The interactions between the atoms are modelled by the classical pair potential proposed by Oeffner and Elliott (OE) [Oeffner R D and Elliott S R 1998, Phys. Rev. B, 58, 14791]. We compare our results to experiments and previous simulations. In addition, an ab initio method, the…
▽ More
A Molecular Dynamics (MD) study of static and dynamic properties of molten and glassy germanium dioxide is presented. The interactions between the atoms are modelled by the classical pair potential proposed by Oeffner and Elliott (OE) [Oeffner R D and Elliott S R 1998, Phys. Rev. B, 58, 14791]. We compare our results to experiments and previous simulations. In addition, an ab initio method, the so-called Car-Parrinello Molecular Dynamics (CPMD), is applied to check the accuracy of the structural properties, as obtained by the classical MD simulations with the OE potential. As in a similar study for SiO2, the structure predicted by CPMD is only slightly softer than that resulting from the classical MD. In contrast to earlier simulations, both the static structure and dynamic properties are in very good agreement with pertinent experimental data. MD simulations with the OE potential are also used to study the relaxation dynamics. As previously found for SiO2, for high temperatures the dynamics of molten GeO2 is compatible with a description in terms of mode coupling theory.
△ Less
Submitted 16 April, 2008;
originally announced April 2008.
-
New fitting scheme to obtain effective potential from Car-Parrinello molecular dynamics simulations: Application to silica
Authors:
Antoine Carre,
Juergen Horbach,
Simona Ispas,
Walter Kob
Abstract:
A fitting scheme is proposed to obtain effective potentials from Car-Parrinello molecular dynamics (CPMD) simulations. It is used to parameterize a new pair potential for silica. MD simulations with this new potential are done to determine structural and dynamic properties and to compare these properties to those obtained from CPMD and a MD simulation using the so-called BKS potential. The new p…
▽ More
A fitting scheme is proposed to obtain effective potentials from Car-Parrinello molecular dynamics (CPMD) simulations. It is used to parameterize a new pair potential for silica. MD simulations with this new potential are done to determine structural and dynamic properties and to compare these properties to those obtained from CPMD and a MD simulation using the so-called BKS potential. The new potential reproduces accurately the liquid structure generated by the CPMD trajectories, the experimental activation energies for the self-diffusion constants and the experimental density of amorphous silica. Also lattice parameters and elastic constants of alpha-quartz are well-reproduced, showing the transferability of the new potential.
△ Less
Submitted 18 February, 2008;
originally announced February 2008.
-
Amorphous silica modeled with truncated and screened Coulomb interactions: A molecular dynamics simulation study
Authors:
Antoine Carré,
Ludovic Berthier,
Juergen Horbach,
Simona Ispas,
Walter Kob
Abstract:
We show that finite-range alternatives to the standard long-range BKS pair potential for silica might be used in molecular dynamics simulations. We study two such models that can be efficiently simulated since no Ewald summation is required. We first consider the Wolf method, where the Coulomb interactions are truncated at a cutoff distance r_c such that the requirement of charge neutrality hold…
▽ More
We show that finite-range alternatives to the standard long-range BKS pair potential for silica might be used in molecular dynamics simulations. We study two such models that can be efficiently simulated since no Ewald summation is required. We first consider the Wolf method, where the Coulomb interactions are truncated at a cutoff distance r_c such that the requirement of charge neutrality holds. Various static and dynamic quantities are computed and compared to results from simulations using Ewald summations. We find very good agreement for r_c ~ 10 Angstroms. For lower values of r_c, the long--range structure is affected which is accompanied by a slight acceleration of dynamic properties. In a second approach, the Coulomb interaction is replaced by an effective Yukawa interaction with two new parameters determined by a force fitting procedure. The same trend as for the Wolf method is seen. However, slightly larger cutoffs have to be used in order to obtain the same accuracy with respect to static and dynamic quantities as for the Wolf method.
△ Less
Submitted 2 July, 2007;
originally announced July 2007.
-
Vibrational properties of a sodium tetrasilicate glass: Ab initio versus Classical Force Fields
Authors:
S. Ispas,
N. Zotov,
S. De Wispelaere,
W. Kob
Abstract:
We have determined the vibrational properties of a sodium tetrasilicate (Na$_{2}$Si$_{4}$O$_{9}$) glass model generated by molecular dynamics simulations. The study has been carried out using a classical valence force fields approach as well as an {\it ab initio} approach in the framework of the density functional theory. The total and partial vibrational densities of states (VDOS) are presented…
▽ More
We have determined the vibrational properties of a sodium tetrasilicate (Na$_{2}$Si$_{4}$O$_{9}$) glass model generated by molecular dynamics simulations. The study has been carried out using a classical valence force fields approach as well as an {\it ab initio} approach in the framework of the density functional theory. The total and partial vibrational densities of states (VDOS) are presented, as well as some characteristics of the vibrational modes (participation ratios, correlation lengths). For the low-frequency bands below 500 cm${}^{-1}$, we find that the shapes of the two calculated VDOS as well as those of their corresponding partial VDOS are quite similar. For the intermediate- and high-frequency ranges, we observe larger discrepancies between the two calculations. Using the eigenmodes of the dynamical matrix we also calculate the polarized Raman spectra within the bond-polarizability approximation. We find an overall agreement between the calculated parallel polarized (VV) Raman spectra and the corresponding experimental spectrum. Regarding the perpendicular depolarized (VH) Raman spectrum, the comparison of the calculated spectra to the experimental data indicates a need for an adjustment of the VH bond-polarizability parameters.
△ Less
Submitted 17 November, 2003; v1 submitted 12 June, 2003;
originally announced June 2003.
-
Structural properties of molten silicates from ab initio molecular-dynamics simulations: comparison between CaO-Al$_2$O$_3$-SiO$_2$ and SiO$_2$
Authors:
Magali Benoit,
Simona Ispas,
Mark E. Tuckerman
Abstract:
We present the results of first-principles molecular-dynamics simulations of molten silicates, based on the density functional formalism. In particular, the structural properties of a calcium aluminosilicate $ [$ CaO-Al$_2$O$_3$-SiO$_2$ $ ]$ melt are compared to those of a silica melt. The local structures of the two melts are in good agreement with the experimental understanding of these system…
▽ More
We present the results of first-principles molecular-dynamics simulations of molten silicates, based on the density functional formalism. In particular, the structural properties of a calcium aluminosilicate $ [$ CaO-Al$_2$O$_3$-SiO$_2$ $ ]$ melt are compared to those of a silica melt. The local structures of the two melts are in good agreement with the experimental understanding of these systems. In the calcium aluminosilicate melt, the number of non-bridging oxygens found is in excess of the number obtained from a simple stoichiometric prediction. In addition, the aluminum avoidance principle, which states that links between AlO$_4$ tetrahedra are absent or rare, is found to be violated. Defects such as 2-fold rings and 5-fold coordinated silicon atoms are found in comparable proportions in both liquids. However, in the calcium aluminosilicate melt, a larger proportion of oxygen atoms are 3-fold coordinated. In addition, 5-fold coordinated aluminum atoms are observed. Finally evidence of creation and anihilation of non-bridging oxygens is observed, with these oxygens being mostly connected to Si tetrahedra.
△ Less
Submitted 19 September, 2001; v1 submitted 14 September, 2001;
originally announced September 2001.
-
Structural and electronic properties of the sodium tetrasilicate glass Na${}_2$Si${}_4$O${}_9$ from classical and ab initio molecular-dynamics simulations
Authors:
Simona Ispas,
Magali Benoit,
Philippe Jund,
Remi Jullien
Abstract:
The structure and the electronic properties of a sodium tetrasilicate (Na${}_2$Si${}_4$O${}_9$) glass were studied by combined Car-Parrinello and classical molecular-dynamics simulations. The glass sample was prepared using a method employed recently in a study of a silica glass [M. Benoit {\it et al}, Euro. Phys. J. B {\bf 13}, 631 (2000)]. First we generated a NS4 glass by classical molecular-…
▽ More
The structure and the electronic properties of a sodium tetrasilicate (Na${}_2$Si${}_4$O${}_9$) glass were studied by combined Car-Parrinello and classical molecular-dynamics simulations. The glass sample was prepared using a method employed recently in a study of a silica glass [M. Benoit {\it et al}, Euro. Phys. J. B {\bf 13}, 631 (2000)]. First we generated a NS4 glass by classical molecular-dynamics and then we took it as the initial configuration of a first-principles molecular-dynamics simulation. In the {\it ab initio} molecular-dynamics simulation, the electronic structure was computed in the framework of the Kohn-Sham density functional theory within the generalized gradient approximation using a B-LYP functional. The Car-Parrinello dynamics is remarkably stable during the considered trajectory and, as soon as it is swit ched on, some significant structural changes occur. The {\it ab initio} description improves the comparison of the structural characteristics with experimental data, in particular concerning the Si-O and Na-O bond lengths.
From an electronic point of view, we find that the introduction of the sodium oxide in the silica network lowers the band gap and leads to a highly non-localized effect on the charges of the network atoms.
△ Less
Submitted 20 December, 2001; v1 submitted 14 September, 2001;
originally announced September 2001.
