Showing 1–50 of 50 results for author: Isa, L

Controlling polymerization-induced phase separation in the synthesis of porous gels

Authors: Yanxia Feng, Noel Ringeisen, Eric R. Dufresne, Lucio Isa, Robert W. Style

Abstract: Porous gels -- gels with solvent-filled pores that are much larger than their mesh size -- are widely used in engineering and biomedical applications due to their tunable mechanics, high water content, and selective permeability. Among various strategies to create porous gels, polymerization-induced phase separation (PIPS) has shown particular promise. However, the conditions that trigger and cont… ▽ More Porous gels -- gels with solvent-filled pores that are much larger than their mesh size -- are widely used in engineering and biomedical applications due to their tunable mechanics, high water content, and selective permeability. Among various strategies to create porous gels, polymerization-induced phase separation (PIPS) has shown particular promise. However, the conditions that trigger and control PIPS remain poorly understood. Here, we systematically investigate the influence of solvent quality, polymeric precursor molecular weight, and polymer concentration on phase separation in polymerizing poly(ethylene glycol) diacrylate gels. We find that phase separation occurs when the precursor solution concentration is below the overlap concentration. Phase-separated gels have a pore geometry that is controlled by solvent quality: better solvents result in smaller pores, while worse solvents can create superporous, highly-absorbant gels. Motivated by our results, we propose a theory that predicts when phase separation occurs in polymerizing gels, applicable across a wide range of polymer/solvent gel systems. Our results provide a framework for the rational design of porous gels. △ Less

Submitted 21 August, 2025; originally announced August 2025.

Comments: 6 figures

Photo-Thermal Actuation of Hybrid Microgels with Dual Laser Optical Tweezers

Authors: S. -H. Jung, C. Zhang, N. Stauffer, F. Scheffold, L. Isa

Abstract: Soft actuators that respond to external stimuli play a fundamental role in microscale robotics, active matter, and bio-inspired systems. Among these actuators, photo-thermal hybrid microgels (HMGs) containing plasmonic nanoparticles enable rapid, spatially controlled actuation via localized heating. Understanding their dynamic behavior at the single-particle level is crucial for optimizing perform… ▽ More Soft actuators that respond to external stimuli play a fundamental role in microscale robotics, active matter, and bio-inspired systems. Among these actuators, photo-thermal hybrid microgels (HMGs) containing plasmonic nanoparticles enable rapid, spatially controlled actuation via localized heating. Understanding their dynamic behavior at the single-particle level is crucial for optimizing performance. However, traditional bulk characterization methods such as dynamic light scattering (DLS), provide only ensemble-averaged data, thereby limiting analytical insights. Here, we introduce a dual-laser optical tweezers approach for real-time, single-particle analysis of HMGs under controlled light exposure. Combining direct imaging and mean-square displacement (MSD) analysis, our method quantifies the precise laser power required for actuation and accurately tracks the particle size. We benchmark our results against an existing dual-laser DLS, demonstrating comparable precision while offering the unique advantage of single-actuator resolution. Thus, our method provides as a robust platform for precise optimization of programmable actuators with applications in soft robotics, microswimmers, and biomedical applications. △ Less

Submitted 1 July, 2025; originally announced July 2025.

Segregation and cooperation in active colloidal binary mixtures

Authors: Laura Alvarez, Elena Sesé-Sansa, Demian Levis, Ignacio Pagonabarraga, Lucio Isa

Abstract: The complex interactions underlying collective motion in biological systems give rise to emergent behaviours such as flocking, sorting, and cooperative transport. These dynamics often involve species with different motilities coordinating movement to optimize navigation and survival. Synthetic analogues based on active colloids offer a controlled platform to explore such behaviours, yet most exper… ▽ More The complex interactions underlying collective motion in biological systems give rise to emergent behaviours such as flocking, sorting, and cooperative transport. These dynamics often involve species with different motilities coordinating movement to optimize navigation and survival. Synthetic analogues based on active colloids offer a controlled platform to explore such behaviours, yet most experimental realizations remain limited to monodisperse systems or mixtures of passive and active particles. Here, we investigate dense binary mixtures of active Janus colloids with distinct motilities and independently tunable alignment, actuated by AC electric fields. We demonstrate experimentally and numerically that both species form highly dynamic polar clusters, with alignment emerging independently of propulsion speed. In mixed populations, interspecies interactions lead to effective segregation and cooperative motion, including transient enhancement of slower particle motility. Our results reveal how motility contrast and alignment combine to drive self-organization in active mixtures, offering strategies for designing reconfigurable materials with collective functionalities. △ Less

Submitted 18 June, 2025; originally announced June 2025.

Density modulations in active colloidal systems through orthogonal propulsion control and sensory delays

Authors: Ueli Töpfer, Maximilian R. Bailey, Sanjay Schreiber, Federico Paratore, Lucio Isa

Abstract: Recent advancements in active colloidal systems aim to mimic key characteristics of biological microswimmers, particularly their adaptive motility in response to environmental changes. While many approaches rely on externally imposing a propulsive force, achieving true autonomous and self-regulating adaptation to the environment remains limited. In this study, we develop and analyze Janus microswi… ▽ More Recent advancements in active colloidal systems aim to mimic key characteristics of biological microswimmers, particularly their adaptive motility in response to environmental changes. While many approaches rely on externally imposing a propulsive force, achieving true autonomous and self-regulating adaptation to the environment remains limited. In this study, we develop and analyze Janus microswimmers driven by electrohydrodynamic flows that autonomously adjust their propulsion dynamics in response to varying illumination conditions. Our Janus particles are silica colloids partially coated with titania, which self-propel via induced-charge electrophoresis (ICEP) under uniform AC electric fields. Since titania is photoconductive, it increases its conductivity under UV illumination, which thereby regulates the propulsion velocity independently of and orthogonally to the applied electric field. Crucially, the velocity adaptation requires a finite time. This sensory delay, which we systematically characterize, leads to enhanced microswimmer localization in response to spatiotemporal light modulations compared to the typical case of instantaneous response considered for synthetic microswimmers. By harnessing these dynamics, akin to those of biological microswimmers, we exert precise control over both local and global particle behavior, presenting novel opportunities for adaptive active matter systems. △ Less

Submitted 21 May, 2025; originally announced May 2025.

Self-reconfiguring colloidal active matter

Authors: Stefania Ketzetzi, Lorenzo Caprini, Vivien Willems, Laura Alvarez, Hartmut Löwen, Lucio Isa

Abstract: Cells and microorganisms employ dynamic shape changes to enable steering and avoidance for efficient spatial exploration and collective organization. In contrast, active colloids, their synthetic counterparts, currently lack similar abilities and strategies. Through physical interactions alone, here we create active colloidal molecules that spontaneously reconfigure their structure, unlike traditi… ▽ More Cells and microorganisms employ dynamic shape changes to enable steering and avoidance for efficient spatial exploration and collective organization. In contrast, active colloids, their synthetic counterparts, currently lack similar abilities and strategies. Through physical interactions alone, here we create active colloidal molecules that spontaneously reconfigure their structure, unlike traditional active particles. We find that self-reconfiguration decouples reorientational dynamics from rotational diffusivity and bestows our active molecules additional reorientation capabilities. During encounters with neighbors, rapid conformational changes lead to self-steering and avoidance. At higher area fractions, reconfiguration-induced avoidance fully inhibits characteristic dynamic clustering, motility-induced phase separation and flocking; instead, the system retains a homogeneous structure comprising well-separated active units. Self-reconfiguring systems therefore present an exciting path towards autonomous motion beyond that of classical synthetic active matter. △ Less

Submitted 31 December, 2024; originally announced January 2025.

Gating and tunable confinement of active colloids within patterned environments

Authors: Carolina van Baalen, Stefania Ketzetzi, Anushka Tintor, Lucio Isa

Abstract: Active colloidal particles typically exhibit a pronounced affinity for accumulating and being captured at boundaries. Here, we engineer long-range repulsive interactions between colloids that self-propel under an electric field and patterned obstacles. As a result of these interactions, particles turn away from obstacles and avoid accumulation. We show that by tuning the applied field frequency, w… ▽ More Active colloidal particles typically exhibit a pronounced affinity for accumulating and being captured at boundaries. Here, we engineer long-range repulsive interactions between colloids that self-propel under an electric field and patterned obstacles. As a result of these interactions, particles turn away from obstacles and avoid accumulation. We show that by tuning the applied field frequency, we precisely and rapidly control the effective size of the obstacles and therefore modulate the particle approach distance. This feature allows us to achieve gating and tunable confinement of our active particles whereby they can access regions between obstacles depending on the applied field. Our work provides a versatile means to directly control confinement and organization, paving the way towards applications such as sorting particles based on motility or localizing active particles on demand. △ Less

Submitted 31 December, 2024; originally announced January 2025.

Tunable Assembly of Confined Janus Microswimmers in Sub-kHz Electic Fields under Gravity

Authors: Carolina van Baalen, Laura Alvarez, Robert Style, Lucio Isa

Abstract: Active systems comprising micron-sized self-propelling units, also termed microswimmers, are promising candidates for the bottom-up assembly of small structures and reconfigurable materials. Here we leverage field-driven colloidal assembly to induce structural transformations in dense layers of microswimmers driven by an alternating current (AC) electric field and confined in a microfabricated tra… ▽ More Active systems comprising micron-sized self-propelling units, also termed microswimmers, are promising candidates for the bottom-up assembly of small structures and reconfigurable materials. Here we leverage field-driven colloidal assembly to induce structural transformations in dense layers of microswimmers driven by an alternating current (AC) electric field and confined in a microfabricated trap under the influence of gravity. By varying the electric field frequency, we realize significant structural transformations, from a gas-like state at high frequencies to dynamically rearranging dense crystalline clusters at lower frequencies, characterized by vorticity in their dynamics. We demonstrate the ability to switch between these states on-demand, showing that the clustering mechanism differs from motility-induced phase separation. Our results offer a valuable framework for designing high-density active matter systems with controllable structural properties, envisioned to advance the development of artificial materials with self-healing and reconfiguration capabilities. △ Less

Submitted 21 December, 2024; originally announced December 2024.

Sliding or Rolling? Characterizing single-particle contacts

Authors: Simon Scherrer, Shivaprakash N. Ramakrishna, Vincent Niggel, Chiao-Peng Hsu, Robert W. Style, Nicholas D. Spencer, Lucio Isa

Abstract: Contacts between particles in dense, sheared suspensions are believed to underpin much of their rheology. Roughness and adhesion are known to constrain the relative motion of particles, and thus globally affect the shear response, but an experimental description of how they microscopically influence the transmission of forces and relative displacements within contacts is lacking. Here we show that… ▽ More Contacts between particles in dense, sheared suspensions are believed to underpin much of their rheology. Roughness and adhesion are known to constrain the relative motion of particles, and thus globally affect the shear response, but an experimental description of how they microscopically influence the transmission of forces and relative displacements within contacts is lacking. Here we show that an innovative colloidal-probe atomic force microscopy technique allows the simultaneous measurement of normal and tangential forces exchanged between tailored surfaces and microparticles while tracking their relative sliding and rolling, unlocking the direct measurement of coefficients of rolling friction, as well as of sliding friction. We demonstrate that, in the presence of sufficient traction, particles spontaneously roll, reducing dissipation and promoting longer-lasting contacts. Conversely, when rolling is prevented, friction is greatly enhanced for rough and adhesive surfaces, while smooth particles coated by polymer brushes maintain well-lubricated contacts. We find that surface roughness induces rolling due to load-dependent asperity interlocking, leading to large off-axis particle rotations. In contrast, smooth, adhesive surfaces promote rolling along the principal axis of motion. Our results offer direct values of friction coefficients for numerical studies and an interpretation of the onset of discontinuous shear thickening based on them, opening up new ways to tailor rheology via contact engineering. △ Less

Submitted 4 December, 2024; originally announced December 2024.

Comments: 7 Figures

The 2024 Motile Active Matter Roadmap

Authors: Gerhard Gompper, Howard A. Stone, Christina Kurzthaler, David Saintillan, Fernado Peruani, Dmitry A. Fedosov, Thorsten Auth, Cecile Cottin-Bizonne, Christophe Ybert, Eric Clement, Thierry Darnige, Anke Lindner, Raymond E. Goldstein, Benno Liebchen, Jack Binysh, Anton Souslov, Lucio Isa, Roberto di Leonardo, Giacomo Frangipane, Hongri Gu, Bradley J. Nelson, Fridtjof Brauns, M. Cristina Marchetti, Frank Cichos, Veit-Lorenz Heuthe , et al. (7 additional authors not shown)

Abstract: Activity and autonomous motion are fundamental aspects of many living and engineering systems. Here, the scale of biological agents covers a wide range, from nanomotors, cytoskeleton, and cells, to insects, fish, birds, and people. Inspired by biological active systems, various types of autonomous synthetic nano- and micromachines have been designed, which provide the basis for multifunctional, hi… ▽ More Activity and autonomous motion are fundamental aspects of many living and engineering systems. Here, the scale of biological agents covers a wide range, from nanomotors, cytoskeleton, and cells, to insects, fish, birds, and people. Inspired by biological active systems, various types of autonomous synthetic nano- and micromachines have been designed, which provide the basis for multifunctional, highly responsive, intelligent active materials. A major challenge for understanding and designing active matter is their inherent non-equilibrium nature due to persistent energy consumption, which invalidates equilibrium concepts such as free energy, detailed balance, and time-reversal symmetry. Furthermore, interactions in ensembles of active agents are often non-additive and non-reciprocal. An important aspect of biological agents is their ability to sense the environment, process this information, and adjust their motion accordingly. It is an important goal for the engineering of micro-robotic systems to achieve similar functionality. With many fundamental properties of motile active matter now reasonably well understood and under control, the ground is prepared for the study of physical aspects and mechanisms of motion in complex environments, of the behavior of systems with new physical features like chirality, of the development of novel micromachines and microbots, of the emergent collective behavior and swarming of intelligent self-propelled particles, and of particular features of microbial systems. The vast complexity of phenomena and mechanisms involved in the self-organization and dynamics of motile active matter poses major challenges, which can only be addressed by a truly interdisciplinary effort involving scientists from biology, chemistry, ecology, engineering, mathematics, and physics. △ Less

Submitted 29 November, 2024; originally announced November 2024.

Characterizing hydrogel behavior under compression with gel-freezing osmometry

Authors: Yanxia Feng, Dominic Gerber, Stefanie Heyden, Martin Kröger, Eric R. Dufresne, Lucio Isa, Robert W. Style

Abstract: Hydrogels are particularly versatile materials that are widely found in both Nature and industry. One key reason for this versatility is their high water content, which lets them dramatically change their volume and many of their mechanical properties -- often by orders of magnitude -- as they swell and dry out. Currently, we lack techniques that can precisely characterize how these properties cha… ▽ More Hydrogels are particularly versatile materials that are widely found in both Nature and industry. One key reason for this versatility is their high water content, which lets them dramatically change their volume and many of their mechanical properties -- often by orders of magnitude -- as they swell and dry out. Currently, we lack techniques that can precisely characterize how these properties change with water content. To overcome this challenge, here we develop Gel-Freezing Osmometry (GelFrO): an extension of freezing-point osmometry. We show how GelFrO can measure a hydrogel's mechanical response to compression and osmotic pressure, while only using small, $O(100μ$L$)$ samples. Because the technique allows measurement of properties over an unusually wide range of water contents, it allows us to accurately test theoretical predictions. We find simple, power-law behavior for both mechanical response to compression, and osmotic pressure, while these are not well-captured by classical Flory-Huggins theory. We interpret this power-law behavior as a hallmark of a microscopic fractal structure of the gel's polymer network, and propose a simple way to connect the gel's fractal dimension to its mechanical and osmotic properties. This connection is supported by observations of hydrogel microstructures using small-angle x-ray scattering. Finally, our results motivate us to propose an updated constitutive model describing hydrogel swelling, and mechanical response. △ Less

Submitted 18 July, 2024; originally announced July 2024.

Simulation and time series analysis of responsive active Brownian particles (rABPs) with memory

Authors: Maximilian Bailey, Fabio Grillo, Lucio Isa

Abstract: To realise the goals of active matter at the micro- and nano-scale, the next generation of microrobots must be capable of autonomously sensing and responding to their environment to carry out pre-programmed tasks. Memory effects are proposed to have a significant effect on the dynamics of responsive robotic systems, drawing parallels to strategies used in nature across all length-scales. Inspired… ▽ More To realise the goals of active matter at the micro- and nano-scale, the next generation of microrobots must be capable of autonomously sensing and responding to their environment to carry out pre-programmed tasks. Memory effects are proposed to have a significant effect on the dynamics of responsive robotic systems, drawing parallels to strategies used in nature across all length-scales. Inspired by the integral feedback control mechanism by which E.coli are proposed to sense their environment, we develop a numerical responsive active Brownian particle (rABP) model in which the rABPs continuously react to changes in the physical parameters dictated by their local environment. The resulting generated time series are then used to classify and characterise their response, leading to the identification of conditional heteroscedasticity in their physics. We then train recurrent neural networks (RNNs) capable of quantitatively describing the responsiveness of rABPs using their 2-D trajectories. We believe that our proposed strategy to determine the parameters governing the dynamics of rABPs can be applied to guide the design of microrobots with physical intelligence encoded during their fabrication. △ Less

Submitted 2 April, 2024; originally announced April 2024.

Comments: 13 pages, 6 figures

Effect of particle stiffness and surface properties on the nonlinear viscoelasticity of dense microgel suspensions

Authors: Jacopo Vialetto, Shivaprakash N. Ramakrishna, Lucio Isa, Marco Laurati

Abstract: Particle surface chemistry and internal softness are two fundamental parameters in governing the mechanical properties of dense colloidal suspensions, dictating structure and flow, therefore of interest from materials fabrication to processing. Here, we modulate softness by tuning the crosslinker content of poly(N-isopropylacrylamide) microgels, and we adjust their surface properties by co-polymer… ▽ More Particle surface chemistry and internal softness are two fundamental parameters in governing the mechanical properties of dense colloidal suspensions, dictating structure and flow, therefore of interest from materials fabrication to processing. Here, we modulate softness by tuning the crosslinker content of poly(N-isopropylacrylamide) microgels, and we adjust their surface properties by co-polymerization with polyethylene glycol (PEG) chains, controlling adhesion, friction and fuzziness. We investigate the distinct effects of these parameters on the entire mechanical response from restructuring to complete fluidization of jammed samples at varying packing fractions under large-amplitude oscillatory shear experiments, and we complement rheological data with colloidal-probe atomic force microscopy to unravel variations in the particles' surface properties. We find that surface properties play a fundamental role at smaller packings; decreasing adhesion and friction at contact causes the samples to yield and fluidify in a lower deformation range. Instead, increasing softness or fuzziness has a similar effect at ultra-high densities, making suspensions able to better adapt to the applied shear and reach complete fluidization over a larger deformation range. These findings shed new light on the single-particle parameters governing the mechanical response of dense suspensions subjected to deformation, offering synthetic approaches to design materials with tailored mechanical properties. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Janus microswimmers are poor hydrodynamic mixers

Authors: Maximilian Bailey, Dmitry Fedosov, Federico Paratore, Fabio Grillo, Gerhard Gompper, Lucio Isa

Abstract: The generation of fluid flows by autophoretic microswimmers has been proposed as a mechanism to enhance mass transport and mixing at the micro- and nanoscale. Here, we experimentally investigate the ability of model 2-D "active baths" of photocatalytic silica-titania Janus microspheres to enhance the diffusivity of tracer particles at different microswimmer densities below the onset of collective… ▽ More The generation of fluid flows by autophoretic microswimmers has been proposed as a mechanism to enhance mass transport and mixing at the micro- and nanoscale. Here, we experimentally investigate the ability of model 2-D "active baths" of photocatalytic silica-titania Janus microspheres to enhance the diffusivity of tracer particles at different microswimmer densities below the onset of collective behaviour. Inspired by the similarities between our experimental findings and previous results for biological microorganisms, we then model our Janus microswimmers using a general squirmer framework, specifically treating them as neutral squirmers. The numerical simulations faithfully capture our observations, offer an insight into the microscopic mechanism underpinning tracer transport, and allow us to expand the parameter space beyond our experimental system. We find strong evidence that near-field interactions dominate enhancements in tracer diffusivity in active Janus baths, leading to the identification of an operating window for enhanced tracer transport by chemical microswimmers based on scaling arguments. Based on this argumentation, we suggest that for many chemically active colloidal systems, hydrodynamics alone is likely to be insufficient to induce appreciable mixing of passive components with large diffusion coefficients. △ Less

Submitted 2 April, 2024; v1 submitted 6 November, 2023; originally announced November 2023.

Comments: 18 pages, 12 Figures

Minimal numerical ingredients describe chemical microswimmers's 3D motion

Authors: Maximilian R. Bailey, C. Miguel Barriuso Gutiérrez, José Martín-Roca, Vincent Niggel, Virginia Carrasco-Fadanelli, Ivo Buttinoni, Ignacio Pagonabarraga, Lucio Isa, Chantal Valeriani

Abstract: The underlying mechanisms and physics of catalytic Janus microswimmers is highly complex, requiring details of the associated phoretic fields and the physiochemical properties of catalyst, particle, boundaries, and the fuel used. Therefore, developing a minimal (and more general) model capable of capturing the overall dynamics of these autonomous particles is highly desirable. In the presented wor… ▽ More The underlying mechanisms and physics of catalytic Janus microswimmers is highly complex, requiring details of the associated phoretic fields and the physiochemical properties of catalyst, particle, boundaries, and the fuel used. Therefore, developing a minimal (and more general) model capable of capturing the overall dynamics of these autonomous particles is highly desirable. In the presented work, we demonstrate that a coarse-grained dissipative particle-hydrodynamics model is capable of describing the behaviour of various chemical microswimmer systems. Specifically, we show how a competing balance between hydrodynamic interactions experienced by a squirmer in the presence of a substrate, gravity, and mass and shape asymmetries can reproduce a range of dynamics seen in different experimental systems. We hope that our general model will inspire further synthetic work where various modes of swimmer motion can be encoded via shape and mass during fabrication, helping to realise the still outstanding goal of microswimmers capable of complex 3-D behaviour △ Less

Submitted 30 July, 2023; originally announced July 2023.

Tuning electrostatic interactions of colloidal particles at oil-water interfaces with organic salts

Authors: Carolina van Baalen, Jacopo Vialetto, Lucio Isa

Abstract: Monolayers of colloidal particles at oil-water interfaces readily crystalize owing to electrostatic repulsion, which is often mediated through the oil. However, little attempts exist to control it using oil-soluble electrolytes. We probe the interactions amongst charged hydrophobic micospheres confined at a water/hexadecane interface and show that repulsion can be continuously tuned over orders of… ▽ More Monolayers of colloidal particles at oil-water interfaces readily crystalize owing to electrostatic repulsion, which is often mediated through the oil. However, little attempts exist to control it using oil-soluble electrolytes. We probe the interactions amongst charged hydrophobic micospheres confined at a water/hexadecane interface and show that repulsion can be continuously tuned over orders of magnitude upon introducing minor amounts of an organic salt into the oil. Our results show that charged groups at the particle/oil interface are subject to an associative discharging mechanism, analogous to the charge regulation kinetics observed for charged colloids in non-polar solvents. △ Less

Submitted 3 May, 2023; originally announced May 2023.

The effect of curvature on the diffusion of colloidal bananas

Authors: Justin-Aurel Ulbrich, Carla Fernandez-Rico, Brian Rost, Jacopo Vialetto, Lucio Isa, Jeffrey S. Urbach, Roel P. A. Dullens

Abstract: Anisotropic colloidal particles exhibit complex dynamics which play a crucial role in their functionality, transport and phase behaviour. In this work, we investigate the two-dimensional diffusion of smoothly curved colloidal rods -- also known as colloidal bananas -- as a function of their opening angle, α. We measure the translational and rotational diffusion coefficients of the particles with o… ▽ More Anisotropic colloidal particles exhibit complex dynamics which play a crucial role in their functionality, transport and phase behaviour. In this work, we investigate the two-dimensional diffusion of smoothly curved colloidal rods -- also known as colloidal bananas -- as a function of their opening angle, α. We measure the translational and rotational diffusion coefficients of the particles with opening angles ranging from 0° (straight rods) to nearly 360°(closed rings). In particular, we find that the anisotropic diffusion of the particles varies non-monotonically with their opening angle and that the axis of fastest diffusion switches from the long to the short axis of the particles when α>180°. We also find that the rotational diffusion coefficient of nearly closed rings is approximately an order of magnitude higher than that of straight rods of the same length. Finally, we show that the experimental results are consistent with Slender Body Theory, indicating that the dynamical behavior of the particles arises primarily from their local drag anisotropy. These results highlight the impact of curvature on the Brownian Motion of elongated colloidal particles, which must be taken into account when seeking to understand the behaviour of curved colloidal particles. △ Less

Submitted 14 November, 2022; originally announced November 2022.

Comments: 5 pages (including references) and 4 figures

Self-propelling colloidal finite state machines

Authors: Steven van Kesteren, Laura Alvarez, Silvia Arrese-Igor, Angel Alegria, Lucio Isa

Abstract: Endowing materials with physical intelligence holds the key for a progress leap in robotic systems. In spite of the growing success for macroscopic devices, transferring these concepts to the microscale presents several challenges connected to the lack of suitable fabrication and design techniques, and of internal response schemes that connect the materials' properties to the function of an autono… ▽ More Endowing materials with physical intelligence holds the key for a progress leap in robotic systems. In spite of the growing success for macroscopic devices, transferring these concepts to the microscale presents several challenges connected to the lack of suitable fabrication and design techniques, and of internal response schemes that connect the materials' properties to the function of an autonomous unit. Here, we realize self-propelling colloidal clusters which behave as simple finite state machines, i.e. systems built to possess a finite number of internal states connected by reversible transitions and associated to distinct functions. We produce these units via capillary assembly combining hard polystyrene colloids with two different types of thermo-responsive microgels. The clusters, actuated by spatially uniform AC electric fields, adapt their shape and dielectric properties, and consequently their propulsion, via reversible temperature-induced transitions controlled by light. The different transition temperatures for the two microgels enable three distinct dynamical states corresponding to three illumination intensity levels. The sequential reconfiguration of the microgels affects the velocity and shape of the active trajectories according to a pathway defined by tailoring the clusters' geometry during assembly. The demonstration of these simple systems indicates an exciting route to build more complex units with broader reconfiguration schemes and multiple responses towards the realization of autonomous systems with physical intelligence at the colloidal scale. △ Less

Submitted 5 August, 2022; originally announced August 2022.

Printing on particles: combining two-photon nanolithography and capillary assembly to fabricate multi-material microstructures

Authors: Steven van Kesteren, Xueting Shen, Michele Aldeghi, Lucio Isa

Abstract: Additive manufacturing at the micro- and nanoscale has seen a recent upsurge to suit the increasing demand for more elaborate structures. However, the integration and precise placement of multiple distinct materials at small scales remain a challenge. To this end, we combine here the directed capillary assembly of colloidal particles and two-photon direct laser writing (DLW) to realize a new class… ▽ More Additive manufacturing at the micro- and nanoscale has seen a recent upsurge to suit the increasing demand for more elaborate structures. However, the integration and precise placement of multiple distinct materials at small scales remain a challenge. To this end, we combine here the directed capillary assembly of colloidal particles and two-photon direct laser writing (DLW) to realize a new class of multi-material microstructures. We use DLW both to fabricate 3D micro-templates to guide the capillary assembly of soft- and hard colloids, and to link well-defined arrangements of polystyrene or silica particles produced with capillary assembly, a process we term "printing on particles". The printing process is based on automated particle recognition algorithms and enables the user to connect colloids into one- and two-dimensional tailored structures, including particle clusters and lattices of varying symmetry and composition, using commercial photo-resists (IP-L or IP-PDMS). Once printed and developed, the structures can be easily harvested and re-dispersed in water. The flexibility of our method allows the combination of a wide range of materials into complex structures, which we envisage will boost the realization of new systems for a broad range of fields, including microrobotics, micromanipulation and metamaterials. △ Less

Submitted 4 August, 2022; originally announced August 2022.

Comments: 11 pages, 5 figures

Log it: How to fit an active Brownian particle's mean squared displacement with improved parameter estimation

Authors: Maximilian Bailey, Alexander Sprenger, Fabio Grillo, Hartmut Löwen, Lucio Isa

Abstract: The active Brownian particle (ABP) model is widely used to describe the dynamics of active matter systems, such as Janus microswimmers. In particular, the analytical expression for an ABP's mean-squared-displacement (MSD) is useful as it provides a means to describe the essential physics of a self-propelled, spherical Brownian particle. However, the truncated or 'short-time' form of the MSD equati… ▽ More The active Brownian particle (ABP) model is widely used to describe the dynamics of active matter systems, such as Janus microswimmers. In particular, the analytical expression for an ABP's mean-squared-displacement (MSD) is useful as it provides a means to describe the essential physics of a self-propelled, spherical Brownian particle. However, the truncated or 'short-time' form of the MSD equation is typically fitted, which can lead to significant problems in parameter estimation. Furthermore, heteroscedasticity and the often statistically dependent observations of an ABP's MSD lead to a situation where standard ordinary least squares (OLS) regression will obtain biased estimates and unreliable confidence intervals. Here, we propose to revert to always fitting the full expression of an ABP's MSD at short timescales, using bootstrapping to construct confidence intervals of the fitted parameters. Additionally, after comparison between different fitting strategies, we propose to extract the physical parameters of an ABP using its mean logarithmic squared displacement (MLSD). These steps improve the estimation of an ABP's physical properties, and provide more reliable confidence intervals, which are critical in the context of a growing interest in the interactions of microswimmers with confining boundaries and the influence on their motion. △ Less

Submitted 3 August, 2022; originally announced August 2022.

Comments: 20 pages, 5 figures

Tracking Janus microswimmers in 3D with Machine Learning

Authors: Maximilian Bailey, Fabio Grillo, Lucio Isa

Abstract: Advancements in artificial active matter heavily rely on our ability to characterise their motion. Yet, the most widely used tool to analyse the latter is standard wide-field microscopy, which is largely limited to the study of two-dimensional motion. In contrast, real-world applications often require the navigation of complex three-dimensional environments. Here, we present a Machine Learning (ML… ▽ More Advancements in artificial active matter heavily rely on our ability to characterise their motion. Yet, the most widely used tool to analyse the latter is standard wide-field microscopy, which is largely limited to the study of two-dimensional motion. In contrast, real-world applications often require the navigation of complex three-dimensional environments. Here, we present a Machine Learning (ML) approach to track Janus microswimmers in three dimensions, using Z-stacks as labelled training data. We demonstrate several examples of ML algorithms using freely available and well-documented software, and find that an ensemble decision tree-based model (Extremely Randomised Decision Trees) performs the best at tracking the particles over a volume spanning a depth of more than 40 $μ$m. With this model, we are able to localise Janus particles with a significant optical asymmetry from standard wide-field microscopy images, bypassing the need for specialised equipment and expertise such as that required for digital holographic microscopy. We expect that ML algorithms will become increasingly prevalent by necessity in the study of active matter systems, and encourage experimentalists to take advantage of this powerful tool to address the various challenges within the field. △ Less

Submitted 23 June, 2022; originally announced June 2022.

Comments: 40 pages, 10 figures

Steering self-organisation through confinement

Authors: Nuno A. M. Araújo, Liesbeth M. C. Janssen, Thomas Barois, Guido Boffetta, Itai Cohen, Alessandro Corbetta, Olivier Dauchot, Marjolein Dijkstra, William M. Durham, Audrey Dussutour, Simon Garnier, Hanneke Gelderblom, Ramin Golestanian, Lucio Isa, Gijsje H. Koenderink, Hartmut Löwen, Ralf Metzler, Marco Polin, C. Patrick Royall, Anđela Šarić, Anupam Sengupta, Cécile Sykes, Vito Trianni, Idan Tuval, Nicolas Vogel , et al. (4 additional authors not shown)

Abstract: Self-organisation is the spontaneous emergence of spatio-temporal structures and patterns from the interaction of smaller individual units. Examples are found across many scales in very different systems and scientific disciplines, from physics, materials science and robotics to biology, geophysics and astronomy. Recent research has highlighted how self-organisation can be both mediated and contro… ▽ More Self-organisation is the spontaneous emergence of spatio-temporal structures and patterns from the interaction of smaller individual units. Examples are found across many scales in very different systems and scientific disciplines, from physics, materials science and robotics to biology, geophysics and astronomy. Recent research has highlighted how self-organisation can be both mediated and controlled by confinement. Confinement occurs through interactions with boundaries, and can function as either a catalyst or inhibitor of self-organisation. It can then become a means to actively steer the emergence or suppression of collective phenomena in space and time. Here, to provide a common framework for future research, we examine the role of confinement in self-organisation and identify overarching scientific challenges across disciplines that need to be addressed to harness its full scientific and technological potential. This framework will not only accelerate the generation of a common deeper understanding of self-organisation but also trigger the development of innovative strategies to steer it through confinement, with impact, e.g., on the design of smarter materials, tissue engineering for biomedicine and crowd management. △ Less

Submitted 21 April, 2022; originally announced April 2022.

Journal ref: Soft Matter, 19, 1695 (2023)

In-situ imaging of the three-dimensional shape of soft responsive particles at fluid interfaces by atomic force microscopy

Authors: Jacopo Vialetto, Shivaprakash N. Ramakrishna, Lucio Isa

Abstract: The reconfiguration of soft, deformable particles upon adsorption at the interface between two fluids underpins many aspects of their dynamics and interactions, ultimately controlling the macroscopic properties of particle monolayers of relevance for materials, such as particle-stabilized emulsions and foams, and processes, e. g. particle-based lithography. In spite of its importance, experimental… ▽ More The reconfiguration of soft, deformable particles upon adsorption at the interface between two fluids underpins many aspects of their dynamics and interactions, ultimately controlling the macroscopic properties of particle monolayers of relevance for materials, such as particle-stabilized emulsions and foams, and processes, e. g. particle-based lithography. In spite of its importance, experimentally determining the three-dimensional shape of soft particles at fluid interfaces with high resolution remains an elusive task. In this work, we take poly(N-isopropylacrylamide) (pNIPAM) microgels as model soft particles and demonstrate that their conformation at the interface between an aqueous and an oil phase can be fully reconstructed by means of in-situ atomic force microscopy (AFM) imaging. We show that imaging the particle topography from both sides of the interface allows one to characterize the in-plane deformation of the particle under the action of interfacial tension and to visualize the occurrence of asymmetric swelling in the two fluids. Additionally, the technique enables investigating different fluid phases and particle architectures, as well as studying in situ the effect of temperature variations on particle conformation. We envisage that these results open up an exciting range of possibilities to provide microscopic insights between the single-particle behavior of soft objects at fluid interfaces and macroscopic material properties of relevance for applications and fundamental studies alike. △ Less

Submitted 20 April, 2022; originally announced April 2022.

Comments: 36 pages, 13 figures including Supporting Information

Influence of the interfacial tension on the microstructural and mechanical properties of microgels at fluid interfaces

Authors: Jacopo Vialetto, Natalie Nussbaum, Jotam Bergfreund, Peter Fischer, Lucio Isa

Abstract: Microgels are soft colloidal particles constituted by cross-linked polymer networks with a high potential for applications. In particular, after adsorption at a fluid interface, interfacial tension provides two-dimensional (2D) confinement for microgel monolayers and drives the reconfiguration of the particles, enabling their deployment in foam and emulsion stabilization and in surface patterning… ▽ More Microgels are soft colloidal particles constituted by cross-linked polymer networks with a high potential for applications. In particular, after adsorption at a fluid interface, interfacial tension provides two-dimensional (2D) confinement for microgel monolayers and drives the reconfiguration of the particles, enabling their deployment in foam and emulsion stabilization and in surface patterning for lithography, sensing and optical materials. However, most studies focus on systems of fluids with a high interfacial tension, e.g. alkanes/ or air/water interfaces, which imparts similar properties to the assembled monolayers. Here, instead, we compare two organic fluid phases, hexane and methyl tert-butyl ether, which have markedly different interfacial tension ($γ$) values with water and thus tune the elasticity and deformation of adsorbed microgels. We rationalize how $γ$ controls the single-particle morphology, which consequently modulates the structural and mechanical response of the monolayers at varying interfacial compression. Specifically, when $γ$ is low, the microgels are less deformed within the interface plane and their polymer networks can rearrange more easily upon lateral compression, leading to softer monolayers. Selecting interfaces with different surface energy offers an additional control to customize the 2D assembly of soft particles, from the fine-tuning of particle size and interparticle spacing to the tailoring of mechanical properties. △ Less

Submitted 2 September, 2021; originally announced September 2021.

Comments: 29 pages, 5 figures, 6 supplementary figures

Microrobots from Toposelective Nanoparticle Attachment

Authors: Maximilian R. Bailey, Fabio Grillo, Nicholas D. Spencer, Lucio Isa

Abstract: Microrobots hold promise for applications ranging from targeted delivery to enhanced mixing at the microscale. However, current fabrication techniques suffer from limited throughput and material selection. Here, we demonstrate a versatile route enabling the synthesis of microrobots from off-the-shelf micro- and nano-particles. Our protocol hinges on the toposelective attachment of photocatalytic n… ▽ More Microrobots hold promise for applications ranging from targeted delivery to enhanced mixing at the microscale. However, current fabrication techniques suffer from limited throughput and material selection. Here, we demonstrate a versatile route enabling the synthesis of microrobots from off-the-shelf micro- and nano-particles. Our protocol hinges on the toposelective attachment of photocatalytic nanoparticles onto microparticles, exploiting a multi-functional polymer and a Pickering-wax emulsification step, to yield large quantities of photo-responsive active Janus particles. The polymer presents both silane and nitrocatechol groups, binding silica microspheres to a range of metal oxide nanoparticles. The Pickering-wax emulsions protect part of the microspheres' surface, enabling asymmetric functionalization, as required for self-propulsion. The resulting photocatalytic microrobots display a characteristic orientation-dependent 3D active motion upon UV illumination, different to that conventionally described in the literature. By connecting the extensive library of heterogeneous nanoparticle photocatalysts with the nascent field of active matter, this versatile material platform lays the groundwork towards designer microrobots, which can swim by catalysing a broad range of chemical reactions with potential for future applications. △ Less

Submitted 27 July, 2021; originally announced July 2021.

Comments: 36 pages, 4 figures, 8 supplementary figures

The effect of internal architecture on the assembly of soft particles at fluid interfaces

Authors: Jacopo Vialetto, Fabrizio Camerin, Fabio Grillo, Lorenzo Rovigatti, Emanuela Zaccarelli, Lucio Isa

Abstract: Monolayers of soft colloidal particles confined at fluid interfaces have been attracting increasing interest for fundamental studies and applications alike. However, establishing the relation between their internal architecture, which is controlled during synthesis, and their structural and mechanical properties upon interfacial confinement, which define the monolayer's properties, remains an elus… ▽ More Monolayers of soft colloidal particles confined at fluid interfaces have been attracting increasing interest for fundamental studies and applications alike. However, establishing the relation between their internal architecture, which is controlled during synthesis, and their structural and mechanical properties upon interfacial confinement, which define the monolayer's properties, remains an elusive task. Here, we propose a comprehensive study elucidating this relation for a system of microgels with tunable architecture. We synthesize core-shell microgels, whose soft core can be chemically degraded in a controlled fashion, yielding particles ranging from analogues of standard batch-synthesized to completely hollow microgels after total core removal. We characterize the internal structure of these particles, their swelling properties in bulk and their morphologies upon adsorption at an oil-water interface via a combination of numerical simulations and complementary experiments. In particular, we confirm that hollow microgels are mechanically stable in bulk aqueous conditions and that the progressive removal of the core leads to a significant flattening of the microgels, which become disk-like particles, at the interface. At low compression, the mechanical response of the monolayer is dominated by the presence of loosely crosslinked polymers forming a corona surrounding the particle within the interfacial plane, regardless of the presence of a core. By contrast, at high compression, the absence of a core enables the particles to deform in the direction orthogonal to the interface. These findings shed new light on which structural features of soft particles determine their interfacial behaviour, enabling new design strategies for tailored materials. △ Less

Submitted 27 March, 2021; originally announced March 2021.

Near-zero surface pressure assembly of rectangular lattices of microgels at fluid interfaces for colloidal lithography

Authors: Miguel Angel Fernandez-Rodriguez, Maria-Nefeli Antonopoulou, Lucio Isa

Abstract: Understanding and engineering the self-assembly of soft colloidal particles (microgels) at liquid-liquid interfaces is broadening their use in colloidal lithography. Here, we present a new route to assemble rectangular lattices of microgels at near zero surface pressure relying on the balance between attractive quadrupolar capillary interactions and steric repulsion among the particles at water/oi… ▽ More Understanding and engineering the self-assembly of soft colloidal particles (microgels) at liquid-liquid interfaces is broadening their use in colloidal lithography. Here, we present a new route to assemble rectangular lattices of microgels at near zero surface pressure relying on the balance between attractive quadrupolar capillary interactions and steric repulsion among the particles at water/oil interfaces. These self-assembled rectangular lattices are obtained for a broad range of particles and, after deposition, can be used as lithography masks to obtain regular arrays of vertically aligned nanowires via wet and dry etching processes. △ Less

Submitted 4 December, 2020; v1 submitted 13 October, 2020; originally announced October 2020.

Reconfigurable Artificial Microswimmers with Internal Feedback

Authors: L. Alvarez, M. A. Fernandez-Rodriguez, A. Alegria, S. Arrese-Igor, K. Zhao, M. Kröger, Lucio Isa

Abstract: Micron-size self-propelling particles are often proposed as synthetic models for biological microswimmers, yet they lack internally regulated adaptation, which is central to the autonomy of their biological counterparts. Conversely, adaptation and autonomy can be encoded in larger-scale soft-robotic devices, but transferring these capabilities to the colloidal scale remains elusive. Here, we creat… ▽ More Micron-size self-propelling particles are often proposed as synthetic models for biological microswimmers, yet they lack internally regulated adaptation, which is central to the autonomy of their biological counterparts. Conversely, adaptation and autonomy can be encoded in larger-scale soft-robotic devices, but transferring these capabilities to the colloidal scale remains elusive. Here, we create a new class of responsive microswimmers, powered by induced-charge electrophoresis, which can adapt their motility to external stimuli via an internal feedback. Using sequential capillary assembly, we fabricate deterministic colloidal clusters comprising soft thermoresponsive microparticles, which, upon spontaneous reconfiguration, induce motility changes, such as adaptation of the clusters' propulsion velocity and reversal of its direction. We rationalize the response in terms of a coupling between self-propulsion and variations of particle shape and dielectric properties. Harnessing those allows for strategies to achieve local dynamical control with simple illumination patterns, revealing exciting opportunities for the development of new tactic active materials. △ Less

Submitted 17 September, 2020; originally announced September 2020.

Broadband Mie-driven random quasi-phase-matching

Authors: Romolo Savo, Andrea Morandi, Jolanda S. Müller, Fabian Kaufmann, Flavia Timpu, Marc Reig Escalé, Michele Zanini, Lucio Isa, Rachel Grange

Abstract: High-quality crystals without inversion symmetry are the conventional platform to achieve optical frequency conversion via three wave-mixing. In bulk crystals, efficient wave-mixing relies on phase-matching configurations, while at the micro- and nano-scale it requires resonant mechanisms that enhance the nonlinear light-matter interaction. These strategies commonly result in wavelength-specific p… ▽ More High-quality crystals without inversion symmetry are the conventional platform to achieve optical frequency conversion via three wave-mixing. In bulk crystals, efficient wave-mixing relies on phase-matching configurations, while at the micro- and nano-scale it requires resonant mechanisms that enhance the nonlinear light-matter interaction. These strategies commonly result in wavelength-specific performances and narrowband applications. Disordered photonic materials, made up of a random assembly of optical nonlinear crystals, enable a broadband tunability in the random quasi-phase-matching (RQPM) regime and do not require high-quality materials. Here, we combine resonances and disorder by implementing RQPM in Mie-resonant spheres of a few microns realized by the bottom-up assembly of barium titanate nano-crystals. The measured second harmonic generation (SHG) reveals a combination of broadband and resonant wave mixing, in which Mie resonances drive and enhance the SHG, while the disorder keeps the phase-matching conditions relaxed. This new phase-matching regime can be described by a random walk in the SHG complex plane whose step lengths depend on the local field enhancement within the micro-sphere. Our nano-crystals assemblies provide new opportunities for tailored phase-matching at the micro-scale, beyond the coherence length of the bulk crystal. They can be adapted to achieve frequency conversion from the near-ultraviolet to the infrared ranges, they are low-cost and scalable to large surface areas. △ Less

Submitted 26 May, 2020; originally announced May 2020.

Comments: Main: 9 pages, 5 Figures. Supplementaries: 24 pages, 11 figures, 1 table

Microscale Marangoni Surfers

Authors: Kilian Dietrich, Nick Jaensson, Ivo Buttinoni, Giorgio Volpe, Lucio Isa

Abstract: We apply laser light to induce the asymmetric heating of Janus colloids adsorbed at water-oil interfaces and realize active micrometric "Marangoni surfers". The coupling of temperature and surfactant concentration gradients generates Marangoni stresses leading to self-propulsion. Particle velocities span four orders of magnitude, from microns/s to cm/s, depending on laser power and surfactant conc… ▽ More We apply laser light to induce the asymmetric heating of Janus colloids adsorbed at water-oil interfaces and realize active micrometric "Marangoni surfers". The coupling of temperature and surfactant concentration gradients generates Marangoni stresses leading to self-propulsion. Particle velocities span four orders of magnitude, from microns/s to cm/s, depending on laser power and surfactant concentration. Experiments are rationalized by finite elements simulations, defining different propulsion regimes relative to the magnitude of the thermal and solutal Marangoni stress components. △ Less

Submitted 14 May, 2020; originally announced May 2020.

Comments: main: 6 pages, 4 figures; supplemental: 18 pages, 11 figures

Journal ref: Phys. Rev. Lett. 125, 098001 (2020)

Disentangling the roles of roughness, friction and adhesion in discontinuous shear thickening by means of thermo-responsive particles

Authors: Chiao-Peng Hsu, Joydeb Mandal, Shivaprakash N. Ramakrishna, Nicholas D. Spencer, Lucio Isa

Abstract: Dense suspensions of colloidal or granular particles can display pronounced non-Newtonian behaviour, such as discontinuous shear thickening (DST) and shear jamming (SJ). The essential contribution of particle surface roughness and adhesive forces confirms that stress-activated contacts can play a key role in these phenomena. By employing a system of microparticles coated by responsive polymers tha… ▽ More Dense suspensions of colloidal or granular particles can display pronounced non-Newtonian behaviour, such as discontinuous shear thickening (DST) and shear jamming (SJ). The essential contribution of particle surface roughness and adhesive forces confirms that stress-activated contacts can play a key role in these phenomena. By employing a system of microparticles coated by responsive polymers that allow friction, adhesion, and surface roughness to be selectively and independently tuned as a function of temperature, we offer a way to disentangle these contributions. We find that DST occurs at lower shear rates when friction and adhesion between particles are enhanced at high temperatures. Additionally, the temperature-responsive polymers provide lubricity at low temperatures that can mask surface roughness. The link between single-particle properties and macroscopic rheology is elucidated via lateral force microscopy, which reveals the nature of rheologically relevant contact conditions. In situ temperature tuning during shear allows contact conditions to be modified, and DST to be switched on and off on demand. These findings strengthen our understanding of the microscopic parameters affecting DST and identify new routes for the design of smart, non-Newtonian fluids. △ Less

Submitted 13 April, 2020; originally announced April 2020.

Self-Templating Assembly of Soft Microparticles into Complex Tessellations

Authors: Fabio Grillo, Miguel-Angel Fernandez-Rodriguez, Maria-Nefeli Antonopoulou, Dominic Gerber, Lucio Isa

Abstract: Self-assembled monolayers of microparticles encoding Archimedean and non-regular tessellations promise unprecedented structure-property relationships for a wide spectrum of applications in fields ranging from optoelectronics to surface technology. Yet, despite numerous computational studies predicting the emergence of exotic structures from simple interparticle interactions, the experimental reali… ▽ More Self-assembled monolayers of microparticles encoding Archimedean and non-regular tessellations promise unprecedented structure-property relationships for a wide spectrum of applications in fields ranging from optoelectronics to surface technology. Yet, despite numerous computational studies predicting the emergence of exotic structures from simple interparticle interactions, the experimental realization of non-hexagonal patterns remains challenging. Not only kinetic limitations often hinder structural relaxation, but also programming the inteparticle interactions during assembly, and hence the target structure, remains an elusive task. Here, we demonstrate how a single type of soft polymeric microparticle (microgels) can be assembled into a wide array of complex structures as a result of simple pairwise interactions. We first let microgels self-assemble at a water-oil interface into a hexagonally packed monolayer, which we then compress to varying degrees and deposit onto a solid substrate. By repeating this process twice, we find that the resultant structure is not the mere stacking of two hexagonal patterns. The first monolayer retains its hexagonal structure and acts as a template into which the particles of the second monolayer rearrange to occupy interstitial positions. The frustration between the two lattices generates new symmetries. By simply varying the packing fraction of the two monolayers, we obtain not only low-coordination structures such as rectangular and honeycomb lattices, but also rhomboidal, hexagonal, and herringbone superlattices which display non-regular tessellations. Molecular dynamics simulations show that these structures are thermodynamically stable and develop from short-ranged repulsive interactions, making them easy to predict, and thus opening new avenues to the rational design of complex patterns. △ Less

Submitted 29 November, 2019; originally announced November 2019.

Active Brownian motion with orientation-dependent motility: theory and experiments

Authors: Alexander R. Sprenger, Miguel Angel Fernandez-Rodriguez, Laura Alvarez, Lucio Isa, Raphael Wittkowski, Hartmut Löwen

Abstract: Combining experiments on active colloids, whose propulsion velocity can be controlled via a feedback loop, and theory of active Brownian motion, we explore the dynamics of an overdamped active particle with a motility that depends explicitly on the particle orientation. In this case, the active particle moves faster when oriented along one direction and slower when oriented along another, leading… ▽ More Combining experiments on active colloids, whose propulsion velocity can be controlled via a feedback loop, and theory of active Brownian motion, we explore the dynamics of an overdamped active particle with a motility that depends explicitly on the particle orientation. In this case, the active particle moves faster when oriented along one direction and slower when oriented along another, leading to an anisotropic translational dynamics which is coupled to the particle's rotational diffusion. We propose a basic model of active Brownian motion for orientation-dependent motility. Based on this model, we obtain analytic results for the mean trajectories, averaged over the Brownian noise for various initial configurations, and for the mean-square displacements including their anisotropic non-Gaussian behavior. The theoretical results are found to be in good agreement with the experimental data. Our findings establish a methodology to engineer complex anisotropic motilities of active Brownian particles, with potential impact in the study of the swimming behavior of microorganisms subjected to anisotropic driving fields. △ Less

Submitted 21 November, 2019; originally announced November 2019.

Comments: 34 pages, 6 figures, 2 movies

Journal ref: Langmuir 36, 7066-7073 (2020)

Feedback-Controlled Active Brownian Colloids with Space-Dependent Rotational Dynamics

Authors: Miguel Angel Fernandez-Rodriguez, Fabio Grillo, Laura Alvarez, Marco Rathlef, Ivo Buttinoni, Giovanni Volpe, Lucio Isa

Abstract: The non-thermal nature of self-propelling colloids offers new insights into non-equilibrium physics. The central mathematical model to describe their trajectories is active Brownian motion, where a particle moves with a constant speed, while randomly changing direction due to rotational diffusion. While several feedback strategies exist to achieve position-dependent velocity, the possibility of sp… ▽ More The non-thermal nature of self-propelling colloids offers new insights into non-equilibrium physics. The central mathematical model to describe their trajectories is active Brownian motion, where a particle moves with a constant speed, while randomly changing direction due to rotational diffusion. While several feedback strategies exist to achieve position-dependent velocity, the possibility of spatial and temporal control over rotational diffusion, which is inherently dictated by thermal fluctuations, remains untapped. Here, we decouple rotational diffusion from thermal noise. Using external magnetic fields and discrete-time feedback loops, we tune the rotational diffusivity of active colloids above and below its thermal value at will and explore a rich range of phenomena including anomalous diffusion, directed transport, and localization. These findings add a new dimension to the control of active matter, with implications for a broad range of disciplines, from optimal transport to smart materials. △ Less

Submitted 14 June, 2020; v1 submitted 6 November, 2019; originally announced November 2019.

Microgels Adsorbed at Liquid-Liquid Interfaces: A Joint Numerical and Experimental Study

Authors: Fabrizio Camerin, Miguel Angel Fernandez-Rodriguez, Lorenzo Rovigatti, Maria-Nefeli Antonopoulou, Nicoletta Gnan, Andrea Ninarello, Lucio Isa, Emanuela Zaccarelli

Abstract: Soft particles display highly versatile properties with respect to hard colloids, even more so at fluid-fluid interfaces. In particular, microgels, consisting of a cross-linked polymer network, are able to deform and flatten upon adsorption at the interface due to the balance between surface tension and internal elasticity. Despite the existence of experimental results, a detailed theoretical unde… ▽ More Soft particles display highly versatile properties with respect to hard colloids, even more so at fluid-fluid interfaces. In particular, microgels, consisting of a cross-linked polymer network, are able to deform and flatten upon adsorption at the interface due to the balance between surface tension and internal elasticity. Despite the existence of experimental results, a detailed theoretical understanding of this phenomenon is still lacking due to the absence of appropriate microscopic models. In this work, we propose an advanced modelling of microgels at a flat water/oil interface. The model builds on a realistic description of the internal polymeric architecture and single-particle properties of the microgel and is able to reproduce its experimentally observed shape at the interface. Complementing molecular dynamics simulations with in-situ cryo-electron microscopy experiments and atomic force microscopy imaging after Langmuir-Blodgett deposition, we compare the morphology of the microgels for different values of the cross-linking ratios. Our model allows for a systematic microscopic investigation of soft particles at fluid interfaces, which is essential to develop predictive power for the use of microgels in a broad range of applications, including the stabilization of smart emulsions and the versatile patterning of surfaces. △ Less

Submitted 5 April, 2019; originally announced April 2019.

Tuning Interparticle Hydrogen Bonding in Shear-Jamming Suspensions: Kinetic Effects and Consequences for Tribology and Rheology

Authors: Nicole M. James, Chiao-Peng Hsu, Nicholas D. Spencer, Heinrich M. Jaeger, Lucio Isa

Abstract: The shear-jamming of dense suspensions can be strongly affected by molecular-scale interactions between particles, e.g. by chemically controlling their propensity for hydrogen bonding. However, hydrogen bonding not only enhances interparticle friction, a critical parameter for shear jamming, but also introduces (reversible) adhesion, whose interplay with friction in shear-jamming systems has so fa… ▽ More The shear-jamming of dense suspensions can be strongly affected by molecular-scale interactions between particles, e.g. by chemically controlling their propensity for hydrogen bonding. However, hydrogen bonding not only enhances interparticle friction, a critical parameter for shear jamming, but also introduces (reversible) adhesion, whose interplay with friction in shear-jamming systems has so far remained unclear. Here, we present atomic force microscopy studies to assess interparticle adhesion, its relationship to friction, and how these attributes are influenced by urea, a molecule that interferes with hydrogen bonding. We characterize the kinetics of this process with nuclear magnetic resonance, relating it to the time dependence of the macroscopic flow behavior with rheological measurements. We find that time-dependent urea sorption reduces friction and adhesion, causing a shift in the shear-jamming onset. These results extend our mechanistic understanding of chemical effects on the nature of shear jamming, promising new avenues for fundamental studies and applications alike. △ Less

Submitted 15 January, 2019; originally announced January 2019.

Dynamics and wetting behavior of soft particles at a fluid-fluid interface

Authors: Siddarth A. Vasudevan, Astrid Rauh, Martin Kröger, Matthias Karg, Lucio Isa

Abstract: We investigate the conformation, position, and dynamics of core-shell nanoparticles (CSNPs) composed of a silica core encapsulated in a cross-linked poly-N-isopropylacrylamide shell at a water-oil interface for a systematic range of core sizes and shell thicknesses. We first present a free-energy model that we use to predict the CSNP wetting behavior at the interface as a function of its geometric… ▽ More We investigate the conformation, position, and dynamics of core-shell nanoparticles (CSNPs) composed of a silica core encapsulated in a cross-linked poly-N-isopropylacrylamide shell at a water-oil interface for a systematic range of core sizes and shell thicknesses. We first present a free-energy model that we use to predict the CSNP wetting behavior at the interface as a function of its geometrical and compositional properties in the bulk phases, which gives good agreement with our experimental data. Remarkably, upon knowledge of the polymer shell deformability, the equilibrium particle position relative to the interface plane, an often elusive experimental quantity, can be extracted by measuring its radial dimensions after adsorption. For all the systems studied here, the interfacial dimensions are always larger than in bulk and the particle core resides in a configuration wherein it just touches the interface or is fully immersed in water. Moreover, the stretched shell induces a larger viscous drag at the interface, which appears to depend solely on the interfacial dimensions, irrespective of the portion of the CSNP surface exposed to the two fluids. Our findings indicate that tailoring the architecture of CSNPs can be used to control their properties at the interface, as of interest for applications including emulsion stabilization and nanopatterning. △ Less

Submitted 6 September, 2018; originally announced September 2018.

Comments: 38 pages, 12 figures

Roughness-dependent tribology effects on discontinuous shear thickening

Authors: Chiao-Peng Hsu, Shivaprakash N. Ramakrishna, Michele Zanini, Nicholas D. Spencer, Lucio Isa

Abstract: Surface roughness affects many properties of colloids, from depletion [1] and capillary interactions [2], to their dispersibility [3] and use as emulsion stabilizers [4]. It also impacts particle-particle frictional contacts, which have recently emerged as being responsible for the discontinuous shear thickening (DST) of dense suspensions [5-17]. Tribological properties of these contacts have been… ▽ More Surface roughness affects many properties of colloids, from depletion [1] and capillary interactions [2], to their dispersibility [3] and use as emulsion stabilizers [4]. It also impacts particle-particle frictional contacts, which have recently emerged as being responsible for the discontinuous shear thickening (DST) of dense suspensions [5-17]. Tribological properties of these contacts have been rarely experimentally accessed [6, 15, 17, 18], especially for non-spherical particles. Here, we systematically tackle the effect of nanoscale surface roughness by producing a library of all-silica, raspberry-like colloids [19] and linking their rheology to their tribology. Rougher surfaces lead to a significant anticipation of DST onset, both in terms of shear rate and solid loading. Strikingly, they also eliminate continuous thickening. DST is here due to the interlocking of asperities, which we have identified as "stick-slip" frictional contacts by measuring the sliding of the same particles via lateral force microscopy (LFM). Direct measurements of particle-particle friction therefore highlight the value of an engineering-tribology approach to tuning the thickening of suspensions. △ Less

Submitted 11 January, 2018; originally announced January 2018.

Active Atoms and Interstitials in Two-dimensional Colloidal Crystals

Authors: Kilian Dietrich, Ivo Buttinoni, Giovanni Volpe, Lucio Isa

Abstract: We study experimentally and numerically the motion of a self-phoretic active particle in two-dimensional (2D) loosely-packed colloidal crystals at fluid interfaces. Two scenarios emerge depending on the interaction between the active particle and the lattice: the active particle either navigates throughout the crystal as an interstitial or is part of the lattice and behaves as an active atom. Acti… ▽ More We study experimentally and numerically the motion of a self-phoretic active particle in two-dimensional (2D) loosely-packed colloidal crystals at fluid interfaces. Two scenarios emerge depending on the interaction between the active particle and the lattice: the active particle either navigates throughout the crystal as an interstitial or is part of the lattice and behaves as an active atom. Active interstitials undergo a run-and-tumble motion, with the passive colloids of the crystal acting as tumbling sites. Instead, active atoms exhibit an intermittent motion, which stems from the interplay between the periodic potential landscape of the passive crystal and the particle's self-propulsion. Our results shed new light on the behaviour of dense active phases and constitute the first step towards the realization of non-close-packed crystalline phases with internal activity. △ Less

Submitted 24 October, 2017; originally announced October 2017.

Journal ref: Phys. Rev. Lett. 120, 268004 (2018)

Rational design and fabrication of versatile active colloidal molecules

Authors: Songbo Ni, Emanuele Marini, Ivo Buttinoni, Heiko Wolf, Lucio Isa

Abstract: Active colloids, also known as artificial microswimmers, are self-propelled micro and nanoparticles that convert uniform sources of fuel (e.g. chemical) or uniform external driving fields (e.g. magnetic or electric) into directed motion by virtue of asymmetry in their shape or composition. These materials are currently attracting enormous scientific attention for two main end uses. First, active c… ▽ More Active colloids, also known as artificial microswimmers, are self-propelled micro and nanoparticles that convert uniform sources of fuel (e.g. chemical) or uniform external driving fields (e.g. magnetic or electric) into directed motion by virtue of asymmetry in their shape or composition. These materials are currently attracting enormous scientific attention for two main end uses. First, active colloids are prototypical internally driven, out-of-equilibrium systems and their study has led to new emergent material properties, such as swarming and living crystallization. Secondly, they hold the promise to be used as micro- and nanoscale devices with tremendous potential from medical to environmental applications. However, the current fabrication of active colloids is limited in the programmability of materials, geometry, and modes of motion. Here, we use sequential capillarity- assisted particle assembly (sCAPA) to link microspheres of different materials into clusters of prescribed shapes ("colloidal molecules") that can actively translate, circulate and rotate powered by asymmetric electro-hydrodynamic flows. Further engineering of the geometry and composition provides active colloids that switch motion under external triggers or perform simple pick-up and transport tasks. Our fabrication strategy enables both physicists and engineers to design and create customized active colloids to explore novel fundamental phenomena in active matter and to investigate materials and propulsion schemes that are compatible with future applications. △ Less

Submitted 27 January, 2017; originally announced January 2017.

Adsorption of soft particles at fluid interfaces

Authors: Robert W. Style, Lucio Isa, Eric R. Dufresne

Abstract: Soft particles can be better emulsifiers than hard particles because they stretch at fluid interfaces. This deformation can increase adsorption energies by orders of magnitude relative to rigid particles. The deformation of a particle at an interface is governed by a competition of bulk elasticity and surface tension. When particles are partially wet by the two liquids, deformation is localized wi… ▽ More Soft particles can be better emulsifiers than hard particles because they stretch at fluid interfaces. This deformation can increase adsorption energies by orders of magnitude relative to rigid particles. The deformation of a particle at an interface is governed by a competition of bulk elasticity and surface tension. When particles are partially wet by the two liquids, deformation is localized within a material-dependent distance $L$ from the contact line. At the contact line, the particle morphology is given by a balance of surface tensions. When the particle radius $R \ll L$, the particle adopts a lenticular shape identical to that of an adsorbed fluid droplet. Particle deformations can be elastic or plastic, depending on the relative values of the Young modulus, $E$, and yield stress, $σ_p$. When surface tensions favour complete spreading of the particles at the interface, plastic deformation can lead to unusual fried-egg morphologies. When deformable particles have surface properties that are very similar to one liquid phase, adsorption can be extremely sensitive to small changes of their affinity for the other liquid phase. These findings have implications for the adsorption of microgel particles at fluid interfaces and the performance of stimuli-responsive Pickering emulsions. △ Less

Submitted 14 July, 2015; v1 submitted 19 June, 2015; originally announced June 2015.

Interfacial colloidal monolayers under steady shear: structure and flow profiles

Authors: Ivo Buttinoni, Zachary A. Zell, Todd M. Squires, Lucio Isa

Abstract: We study the coupling between the structural dynamics and rheological response of charged colloidal monolayers at water/oil interfaces, driven into steady shear by a microdisk rotating at a controlled angular velocity. The flow causes particles to layer into rotating concentric rings linked to the local, position-dependent shear rate, which triggers two distinct dynamical regimes: particles move c… ▽ More We study the coupling between the structural dynamics and rheological response of charged colloidal monolayers at water/oil interfaces, driven into steady shear by a microdisk rotating at a controlled angular velocity. The flow causes particles to layer into rotating concentric rings linked to the local, position-dependent shear rate, which triggers two distinct dynamical regimes: particles move continuously "Flowing") close to the microdisk, or exhibit intermittent "Hopping" between local energy minima farther away. The shear-rate dependent surface viscosity of a monolayer can be extracted from an interfacial stress balance, giving "macroscopic" flow curves whose behavior corresponds to the distinct microscopic regimes of particle motion. Hopping Regions correspond to a surface yield stress $η\sim τ_S^Y \dotγ^{-1}$, whereas Flowing Regions exhibit surface viscosities with power-law shear-thinning characteristics. △ Less

Submitted 11 September, 2015; v1 submitted 1 April, 2015; originally announced April 2015.

Comments: Supplementary Materials also present. Soft Matter, 2015

Adsorption at Liquid Interfaces Induces Amyloid Fibril Bending and Ring Formation

Authors: Sophia Jordens, Emily E. Riley, Ivan Usov, Lucio Isa, Peter D. Olmsted, Raffaele Mezzenga

Abstract: Protein fibril accumulation at interfaces is an important step in many physiological processes and neurodegenerative diseases as well as in designing materials. Here we show, using $β$-lactoglobulin fibrils as a model, that semiflexible fibrils exposed to a surface do not possess the Gaussian distribution of curvatures characteristic for wormlike chains, but instead exhibit a spontaneous curvature… ▽ More Protein fibril accumulation at interfaces is an important step in many physiological processes and neurodegenerative diseases as well as in designing materials. Here we show, using $β$-lactoglobulin fibrils as a model, that semiflexible fibrils exposed to a surface do not possess the Gaussian distribution of curvatures characteristic for wormlike chains, but instead exhibit a spontaneous curvature, which can even lead to ring-like conformations. The long-lived presence of such rings is confirmed by atomic force microscopy, cryogenic scanning electron microscopy and passive probe particle tracking at air- and oil-water interfaces. We reason that this spontaneous curvature is governed by structural characteristics on the molecular level and is to be expected when a chiral and polar fibril is placed in an inhomogeneous environment such as an interface. By testing $β$-lactoglobulin fibrils with varying average thicknesses, we conclude that fibril thickness plays a determining role in the propensity to form rings. △ Less

Submitted 29 October, 2014; v1 submitted 24 October, 2014; originally announced October 2014.

Comments: 31 pages, includes main text and supplementary information. Accepted for publication in ACS Nano; replaced to fix small typos in equation number cross referencing

Journal ref: ACS Nano 8 (2014) 11071-11079

Microscopic mechanism for the shear-thickening of non-Brownian suspensions

Authors: Nicolas Fernandez, Roman Mani, David Rinaldi, Dirk Kadau, Martin Mosquet, Helene Lombois-Burger, Juliette Cayer-Barrioz, Hans J. Herrmann, Nicholas D. Spencer, Lucio Isa

Abstract: We propose a simple model, supported by contact-dynamics simulations as well as rheology and friction measurements, that links the transition from continuous to discontinuous shear-thickening in dense granular pastes to distinct lubrication regimes in the particle contacts. We identify a local Sommerfeld number that determines the transition from Newtonian to shear-thickening flows, and then show… ▽ More We propose a simple model, supported by contact-dynamics simulations as well as rheology and friction measurements, that links the transition from continuous to discontinuous shear-thickening in dense granular pastes to distinct lubrication regimes in the particle contacts. We identify a local Sommerfeld number that determines the transition from Newtonian to shear-thickening flows, and then show that the suspension's volume fraction and the boundary lubrication friction coefficient control the nature of the shear-thickening transition, both in simulations and experiments. △ Less

Submitted 5 August, 2013; originally announced August 2013.

Wall slip and flow of concentrated hard-sphere colloidal suspensions

Authors: P. Ballesta, G. Petekidis, L. Isa, W. C. K. Poon, R. Besseling

Abstract: We present a comprehensive study of the slip and flow of concentrated colloidal suspensions using cone-plate rheometry and simultaneous confocal imaging. In the colloidal glass regime, for smooth, non-stick walls, the solid nature of the suspension causes a transition in the rheology from Herschel-Bulkley (HB) bulk flow behavior at large stress to a Bingham-like slip behavior at low stress, which… ▽ More We present a comprehensive study of the slip and flow of concentrated colloidal suspensions using cone-plate rheometry and simultaneous confocal imaging. In the colloidal glass regime, for smooth, non-stick walls, the solid nature of the suspension causes a transition in the rheology from Herschel-Bulkley (HB) bulk flow behavior at large stress to a Bingham-like slip behavior at low stress, which is suppressed for sufficient colloid-wall attraction or colloid-scale wall roughness. Visualization shows how the slip-shear transition depends on gap size and the boundary conditions at both walls and that partial slip persist well above the yield stress. A phenomenological model, incorporating the Bingham slip law and HB bulk flow, fully accounts for the behavior. Microscopically, the Bingham law is related to a thin (sub-colloidal) lubrication layer at the wall, giving rise to a characteristic dependence of slip parameters on particle size and concentration. We relate this to the suspension's osmotic pressure and yield stress and also analyze the influence of van der Waals interaction. For the largest concentrations, we observe non-uniform flow around the yield stress, in line with recent work on bulk shear-banding of concentrated pastes. We also describe residual slip in concentrated liquid suspensions, where the vanishing yield stress causes coexistence of (weak) slip and bulk shear flow for all measured rates. △ Less

Submitted 20 January, 2012; originally announced January 2012.

Shear banding and flow-concentration coupling in colloidal glasses

Authors: R. Besseling, L. Isa, P. Ballesta, G. Petekidis, M. E. Cates, W. C. K. Poon

Abstract: We report experiments on hard sphere colloidal glasses that reveal a type of shear banding hitherto unobserved in soft glasses. We present a scenario that relates this to an instability arising from shear-concentration coupling, a mechanism previously thought unimportant in this class of materials. Below a characteristic shear rate $\dotγ_c$ we observe increasingly non-linear velocity profiles and… ▽ More We report experiments on hard sphere colloidal glasses that reveal a type of shear banding hitherto unobserved in soft glasses. We present a scenario that relates this to an instability arising from shear-concentration coupling, a mechanism previously thought unimportant in this class of materials. Below a characteristic shear rate $\dotγ_c$ we observe increasingly non-linear velocity profiles and strongly localized flows. We attribute this trend to very slight concentration gradients (likely to evade direct detection) arising in the unstable flow regime. A simple model accounts for both the observed increase of $\dotγ_c$ with concentration, and the fluctuations observed in the flow. △ Less

Submitted 24 November, 2010; v1 submitted 8 September, 2010; originally announced September 2010.

Comments: 4 pages, 4 figures, accepted for publication in Phys. Rev. Lett

Quantitative imaging of concentrated suspensions under flow

Authors: Lucio Isa, Rut Besseling, Andrew B Schofield, Wilson C K Poon

Abstract: We review recent advances in imaging the flow of concentrated suspensions, focussing on the use of confocal microscopy to obtain time-resolved information on the single-particle level in these systems. After motivating the need for quantitative (confocal) imaging in suspension rheology, we briefly describe the particles, sample environments, microscopy tools and analysis algorithms needed to per… ▽ More We review recent advances in imaging the flow of concentrated suspensions, focussing on the use of confocal microscopy to obtain time-resolved information on the single-particle level in these systems. After motivating the need for quantitative (confocal) imaging in suspension rheology, we briefly describe the particles, sample environments, microscopy tools and analysis algorithms needed to perform this kind of experiments. The second part of the review focusses on microscopic aspects of the flow of concentrated model hard-sphere-like suspensions, and the relation to non-linear rheological phenomena such as yielding, shear localization, wall slip and shear-induced ordering. Both Brownian and non-Brownian systems will be described. We show how quantitative imaging can improve our understanding of the connection between microscopic dynamics and bulk flow. △ Less

Submitted 30 July, 2009; originally announced July 2009.

Comments: Review on imaging hard-sphere suspensions, incl summary of methodology. Submitted for special volume 'High Solid Dispersions' ed. M. Cloitre, Vol. xx of 'Advances and Polymer Science' (Springer, Berlin, 2009); 22 pages, 16 figs

Quantitative imaging of colloidal flows

Authors: Lucio Isa, Rut Besseling, Eric R. Weeks, Wilson C. K. Poon

Abstract: We present recent advances in the instrumentation and analysis methods for quantitative imaging of concentrated colloidal suspensions under flow. After a brief review of colloidal imaging, we describe various flow geometries for two and and three-dimensional (3D) imaging, including a `confocal rheoscope'. This latter combination of a confocal microscope and a rheometer permits simultaneous chara… ▽ More We present recent advances in the instrumentation and analysis methods for quantitative imaging of concentrated colloidal suspensions under flow. After a brief review of colloidal imaging, we describe various flow geometries for two and and three-dimensional (3D) imaging, including a `confocal rheoscope'. This latter combination of a confocal microscope and a rheometer permits simultaneous characterization of rheological response and 3D microstructural imaging. The main part of the paper discusses in detail how to identify and track particles from confocal images taken during flow. After analyzing the performance of the most commonly used colloid tracking algorithm by Crocker and Grier extended to flowing systems, we propose two new algorithms for reliable particle tracking in non-uniform flows to the level of accuracy already available for quiescent systems. We illustrate the methods by applying it to data collected from colloidal flows in three different geometries (channel flow, parallel plate shear and cone-plate rheometry). △ Less

Submitted 29 July, 2008; originally announced July 2008.

Comments: 21 pages, 24 figures

Slip and flow of hard-sphere colloidal glasses

Authors: P. Ballesta, R. Besseling, L. Isa, G. Petekidis, W. C. K. Poon

Abstract: We study the flow of concentrated hard-sphere colloidal suspensions along smooth, non-stick walls using cone-plate rheometry and simultaneous confocal microscopy. In the glass regime, the global flow shows a transition from Herschel-Bulkley behavior at large shear rate to a characteristic Bingham slip response at small rates, absent for ergodic colloidal fluids. Imaging reveals both the `solid'… ▽ More We study the flow of concentrated hard-sphere colloidal suspensions along smooth, non-stick walls using cone-plate rheometry and simultaneous confocal microscopy. In the glass regime, the global flow shows a transition from Herschel-Bulkley behavior at large shear rate to a characteristic Bingham slip response at small rates, absent for ergodic colloidal fluids. Imaging reveals both the `solid' microstructure during full slip and the local nature of the `slip to shear' transition. Both the local and global flow are described by a phenomenological model, and the associated Bingham slip parameters exhibit characteristic scaling with size and concentration of the hard spheres. △ Less

Submitted 13 November, 2008; v1 submitted 9 July, 2008; originally announced July 2008.

Comments: 4 pages, 4 figures. Accepted for publication in PRL

Velocity oscillations in confined channel flows of concentrated colloidal suspensions

Authors: Lucio Isa, Rut Besseling, Alexander N. Morozov, Wilson C. K. Poon

Abstract: We study the pressure-driven flow of concentrated colloids confined in glass micro-channels at the single particle level using fast confocal microscopy. For channel to particle size ratios $a/\bar{D} \lesssim 30$, the flow rate of the suspended particles shows fluctuations. These turn into regular oscillations for higher confinements ($a/\bar{D} \simeq 20$). We present evidence to link these osc… ▽ More We study the pressure-driven flow of concentrated colloids confined in glass micro-channels at the single particle level using fast confocal microscopy. For channel to particle size ratios $a/\bar{D} \lesssim 30$, the flow rate of the suspended particles shows fluctuations. These turn into regular oscillations for higher confinements ($a/\bar{D} \simeq 20$). We present evidence to link these oscillations with the relative flow of solvent and particles (permeation) and the effect of confinement on shear thickening. △ Less

Submitted 27 June, 2008; originally announced June 2008.

Comments: 4 pages, 6 figures

Shear zones and wall slip in the capillary flow of concentrated colloidal suspensions

Authors: Lucio Isa, Rut Besseling, Wilson C K Poon

Abstract: We image the flow of a nearly random close packed, hard-sphere colloidal suspension (a `paste') in a square capillary using confocal microscopy. The flow consists of a `plug' in the center while shear occurs localized adjacent to the channel walls, reminiscent of yield-stress fluid behavior. However, the observed scaling of the velocity profiles with the flow rate strongly contrasts yield-stress… ▽ More We image the flow of a nearly random close packed, hard-sphere colloidal suspension (a `paste') in a square capillary using confocal microscopy. The flow consists of a `plug' in the center while shear occurs localized adjacent to the channel walls, reminiscent of yield-stress fluid behavior. However, the observed scaling of the velocity profiles with the flow rate strongly contrasts yield-stress fluid predictions. Instead, the velocity profiles can be captured by a theory of stress fluctuations originally developed for chute flow of dry granular media. We verified this behavior both for smooth and rough boundary conditions. △ Less

Submitted 27 February, 2007; originally announced February 2007.

Comments: 4 pages, 5 figures